ramips: update device tree source files

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WLI-TX4-AG300N.dts

diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
index 0ea5e29bc2fc77349fb7e252724b229238d1af89..3c04d49b6630c7616f5d8cb7e04c38a80c11ff3a 100644 (file)
--- a/target/linux/ramips/dts/WLI-TX4-AG300N.dts
+++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
@@ -1,29 +1,19 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        #address-cells = <1>;
        #size-cells = <1>;
-       compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
+       compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
        model = "Buffalo WLI-TX4-AG300N";
 
-       palmbus@300000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -34,50 +24,47 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };
-               partition@40000 {
-                       label = "calibration";
+
+               factory: partition@40000 {
+                       label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };
+
                partition@50000 {
-                       label = "linux";
+                       label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
        };
 
-       ethernet@400000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x4>;
-
-                port@0 {
-                       ralink,fixed-link = <1000 1 1 1>;
-               };
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
+
                bandwidth {
                        label = "bandwidth";
-                       gpios = <&gpio0 8 0>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
                };
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 9 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -85,16 +72,44 @@
                compatible = "gpio-leds";
 
                diag {
-                       label = "buffalo:red:diag";
-                       gpios = <&gpio0 10 1>;
+                       label = "wli-tx4-ag300n:red:diag";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
+
                power {
-                       label = "buffalo:blue:power";
-                       gpios = <&gpio0 12 1>;
+                       label = "wli-tx4-ag300n:blue:power";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
+
                security {
-                       label = "buffalo:blue:security";
-                       gpios = <&gpio0 13 1>;
+                       label = "wli-tx4-ag300n:blue:security";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
+
+       port@0 {
+               mediatek,fixed-link = <100 1 1 1>;
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       phy-mode = "mii";
+                       reg = <0>;
                };
        };
 };
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};