ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WNCE2001.dts
index 02acba5771f79738d8140d2e707c5993e4b4338c..2dc39ce142af7d9335954aed445b697f1d2de5b7 100644 (file)
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l3205d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               factory: partition@30000 {
-                                       label = "factory";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "config";
-                                       reg = <0x40000 0x20000>;
-                                       read-only;
-                               };
-
-                               partition@60000 {
-                                       label = "language";
-                                       reg = <0x60000 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@90000 {
-                                       label = "pot";
-                                       reg = <0x90000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@a0000 {
-                                       label = "checksum";
-                                       reg = <0xa0000 0x10000>;
-                               };
-
-                               partition@b0000 {
-                                       label = "firmware";
-                                       reg = <0xb0000 0x350000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x28>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
                };
        };
 };
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "mx25l3205d";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               factory: partition@30000 {
+                       label = "factory";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               partition@40000 {
+                       label = "config";
+                       reg = <0x40000 0x20000>;
+                       read-only;
+               };
+
+               partition@60000 {
+                       label = "language";
+                       reg = <0x60000 0x30000>;
+                       read-only;
+               };
+
+               partition@90000 {
+                       label = "pot";
+                       reg = <0x90000 0x10000>;
+                       read-only;
+               };
+
+               partition@a0000 {
+                       label = "checksum";
+                       reg = <0xa0000 0x10000>;
+               };
+
+               partition@b0000 {
+                       label = "firmware";
+                       reg = <0xb0000 0x350000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};