ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WNDR3700V5.dts

diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts
index 9d3d0d53968e40533d31cefa1d1d3008260aa558..297b7066c9d37ca5f1b5d277d051afe1669f2f9e 100644 (file)
--- a/target/linux/ramips/dts/WNDR3700V5.dts
+++ b/target/linux/ramips/dts/WNDR3700V5.dts
@@ -2,10 +2,20 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
+       compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
        model = "Netgear WNDR3700v5";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
@@ -15,42 +25,40 @@
                bootargs = "console=ttyS0,57600 maxcpus=2";
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
                wps {
                        label = "wndr3700v5:green:wps";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
-               power {
+               led_power: power {
                        label = "wndr3700v5:green:power";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {
                        label = "wndr3700v5:wps";
-                       gpios = <&gpio0 7 0>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                wifi {
                        label = "wndr3700v5:wifi";
-                       gpios = <&gpio0 8 0>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RFKILL>;
                };
 
                reset {
                        label = "wndr3700v5:reset";
-                       gpios = <&gpio0 14 0>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -61,7 +69,7 @@
                usbpower {
                        gpio-export,name = "usbpower";
                        gpio-export,output = <1>;
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
                };
        };
 };
@@ -69,57 +77,60 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mx25l12805d";
+       mx25l12805d@0 {
+               compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q128";
                spi-max-frequency = <10000000>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@f30000 {
-                       label = "factory";
-                       reg = <0xf30000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               m25p,chunked-io = <32>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@f30000 {
+                               label = "factory";
+                               reg = <0xf30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xee0000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0004>;
-                       mediatek,2ghz = <0>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
+};
 
-       pcie2 {
-               mt76@2,0 {
-                       reg = <0x1000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8004>;
-                       mediatek,5ghz = <0>;
-               };
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
        };
 };
 
@@ -130,7 +141,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group =  "rgmii2", "mdio", "wdt";
+                       ralink,group = "rgmii2", "mdio", "wdt";
                        ralink,function = "gpio";
                };
        };