ramips: move partitions into partition table node

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WSR-600.dts

diff --git a/target/linux/ramips/dts/WSR-600.dts b/target/linux/ramips/dts/WSR-600.dts
index 56988e4b828544306d1661c8994105f58f117f3e..faee19dce157a3f60876fa1499e24875057a71d7 100644 (file)
--- a/target/linux/ramips/dts/WSR-600.dts
+++ b/target/linux/ramips/dts/WSR-600.dts
@@ -2,10 +2,17 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
+       compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
        model = "Buffalo WSR-600DHP";
 
+       aliases {
+               led-status = &led_power;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x4000000>;
@@ -18,96 +25,94 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               power {
+               led_power: power {
                        label = "wsr-600:green:power";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                wifi_o {
                        label = "wsr-600:orange:wifi";
-                       gpios = <&gpio1 9 1>;
+                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
                };
 
                diag {
                        label = "wsr-600:orange:diag";
-                       gpios = <&gpio1 10 1>;
+                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
                };
 
                wifi_g {
                        label = "wsr-600:green:wifi";
-                       gpios = <&gpio1 12 1>;
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
                };
 
                router_o {
                        label = "wsr-600:orange:router";
-                       gpios = <&gpio1 13 1>;
+                       gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
                };
 
                router_g {
                        label = "wsr-600:green:router";
-                       gpios = <&gpio1 14 1>;
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
                };
 
                internet_o {
                        label = "wsr-600:orange:internet";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
                internet_g {
                        label = "wsr-600:green:internet";
-                       gpios = <&gpio1 16 1>;
+                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                power {
                        label = "power";
-                       gpios = <&gpio0 8 1>;
-                       linux,code = <0x74>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 11 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                aoss {
                        label = "aoss";
-                       gpios = <&gpio0 18 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                auto {
                        label = "mode";
-                       gpios = <&gpio0 7 0>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
 
                ap {
                        label = "ap";
-                       gpios = <&gpio0 6 0>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
 
                router {
                        label = "router";
-                       gpios = <&gpio0 10 0>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
        };
 
        gpio_poweroff {
                compatible = "gpio-poweroff";
-               gpios = <&gpio1 11 1>;
+               gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
        };
 };
 
@@ -115,34 +120,38 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80";
+               reg = <0>;
                spi-max-frequency = <10000000>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               m25p,chunked-io = <32>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };
@@ -155,3 +164,25 @@
                };
        };
 };
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       rt5592@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               ralink,mtd-eeprom = <&factory 0x8000>;
+       };
+};
+
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+       };
+};
+
+&xhci {
+       status = "disabled";
+};