ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WZR-AGL300NH.dts

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 0f2a73a48ac90e11f79e90142369ff9b4e4cf103..c6a90d426a3d2b7624c0c7433d5eb4c6764ed1eb 100644 (file)
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -2,20 +2,20 @@
 
 #include "rt2880.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
        #address-cells = <1>;
        #size-cells = <1>;
-       compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
+       compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
        model = "Buffalo WZR-AGL300NH";
 
-       pci@440000 {
-               compatible = "ralink,rt288x-pci";
-               reg = <0x00440000 0x20000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               status = "ok";
+       aliases {
+               led-boot = &led_router;
+               led-failsafe = &led_router;
+               led-running = &led_router;
+               led-upgrade = &led_router;
        };
 
        cfi@1f000000 {
@@ -23,85 +23,88 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "uboot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "uboot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "uboot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
        rtl8366s {
                compatible = "realtek,rtl8366s";
-               gpio-sda = <&gpio0 1 0>;
-               gpio-sck = <&gpio0 2 0>;
+               gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <100>;
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
 
                router {
                        label = "router_switch";
-                       gpios = <&gpio0 7 0>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                        linux,code = <BTN_0>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
-               router {
+               led_router: router {
                        label = "wzr-agl300nh:green:router";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                diag {
                        label = "wzr-agl300nh:red:diag";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                security_g {
                        label = "wzr-agl300nh:orange:security_g";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                security_n {
                        label = "wzr-agl300nh:orange:security_n";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 };
@@ -137,6 +140,10 @@
        };
 };
 
+&pci {
+       status = "okay";
+};
+
 &wmac {
        ralink,mtd-eeprom = <&factory 0>;
 };