ramips: fix power LED DTB for wt3020

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WZR-AGL300NH.dts

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 3d52efd2bb3c333c2ed5c5154d52dc47aaca9e64..e0b93a8261170db121701e6969f9b195a496328f 100644 (file)
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -2,25 +2,17 @@
 
 #include "rt2880.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
        #address-cells = <1>;
        #size-cells = <1>;
-       compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
+       compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
        model = "Buffalo WZR-AGL300NH";
 
-       palmbus@300000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartlite", "mdio";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-status = &led_router;
        };
 
        cfi@1f000000 {
@@ -28,116 +20,126 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "uboot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@30000 {
-                       label = "uboot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
-               };
-       };
-
-       ethernet@400000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x4>;
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-               port@0 {
-                       mediatek,fixed-link = <1000 1 1 1>;
-               };
+                       partition@30000 {
+                               label = "uboot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
 
-               mdio-bus {
-                       status = "okay";
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
 
-                       phy0: ethernet-phy@0 {
-                               phy-mode = "mii";
-                               reg = <0>;
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
                        };
                };
        };
 
        rtl8366s {
                compatible = "realtek,rtl8366s";
-               gpio-sda = <&gpio0 1 0>;
-               gpio-sck = <&gpio0 2 0>;
-       };
-
-       wmac@480000 {
-               ralink,mtd-eeprom = <&factory 0>;
+               gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <100>;
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                router {
                        label = "router_switch";
-                       gpios = <&gpio0 7 0>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_0>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 9 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               router {
+               led_router: router {
                        label = "wzr-agl300nh:green:router";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                diag {
                        label = "wzr-agl300nh:red:diag";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                security_g {
                        label = "wzr-agl300nh:orange:security_g";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                security_n {
                        label = "wzr-agl300nh:orange:security_n";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartlite", "mdio";
+                       ralink,function = "gpio";
                };
        };
+};
 
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
 
-       pcibus0: pci@00440000 {
-               compatible = "ralink,rt288x-pci";
-               reg = <0x00440000 0x20000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               status = "ok";
+       port@0 {
+               mediatek,fixed-link = <1000 1 1 1>;
        };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       phy-mode = "mii";
+                       reg = <0>;
+               };
+       };
+};
+
+&pci {
+       status = "okay";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
 };