ramips: specify "firmware" partition format
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ZBT-WR8305RT.dts
index fcac8290f5ebe2aabd8da33b83bb64d8b9f5095b..eafe778cf93f488fcb1632a6cc1d3e55151deb49 100644 (file)
 /dts-v1/;
 
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
        model = "Zbtlink ZBT-WR8305RT";
 
-       palmbus@10000000 {
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-
-               gpio3: gpio@688 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "mx25l6405d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "en25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
-               };
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-               mediatek,portmap = "llllw";
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       ephy {
-                               ralink,group = "ephy";
-                               ralink,function = "ephy";
-                       };
-
-                       default {
-                               ralink,group = "i2c", "uartf", "spi refclk", "wled";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-boot = &led_sys;
+               led-failsafe = &led_sys;
+               led-running = &led_sys;
+               led-upgrade = &led_sys;
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               sys {
+               led_sys: sys {
                        label = "zbt-wr8305rt:green:sys";
-                       gpios = <&gpio1 14 1>;
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
                };
 
                lan {
                        label = "zbt-wr8305rt:green:usb";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
 
                wifi {
                        label = "zbt-wr8305rt:green:wifi";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ephy_pins>;
+       mtd-mac-address = <&factory 0x4>;
+       mediatek,portmap = "llllw";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "i2c", "uartf", "spi refclk", "wled";
+                       ralink,function = "gpio";
                };
        };
 };