ramips: add support for ipTIME A104ns

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7620a_netgear_wn3000rp-v3.dts

diff --git a/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts
index 66a5ad5ece6b27596a50cf0451118892940ff3bd..917db865a685dd6b09398a7133488de118687bda 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts
+++ b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts
@@ -2,10 +2,7 @@
 
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi"
 
 / {
        compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
@@ -18,10 +15,6 @@
                led-upgrade = &led_power_green;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -71,82 +64,30 @@
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
 };
 
-&gpio1 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x40000 0x7b0000>;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
+&partitions {
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0 0x30000>;
+               read-only;
        };
-};
 
-&ethernet {
-       mtd-mac-address = <&art 0x0>;
-};
+       partition@30000 {
+               label = "u-boot-env";
+               reg = <0x30000 0x10000>;
+               read-only;
+       };
 
-&wmac {
-       mtd-mac-address = <&art 0x6>;
-       ralink,mtd-eeprom = <&art 0x1000>;
-};
+       partition@40000 {
+               compatible = "denx,uimage";
+               label = "firmware";
+               reg = <0x40000 0x7b0000>;
+       };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "i2c", "uartf", "spi refclk";
-                       ralink,function = "gpio";
-               };
+       art: partition@7f0000 {
+               label = "art";
+               reg = <0x7f0000 0x10000>;
+               read-only;
        };
 };