ramips: move compatible for Ubiquiti Edgerouter X to DTS file

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / rt2880.dtsi

diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi
index b51314856d4790a63e921379a0adda5ecb55db10..762fe49e7c3a34a81ab9bbc575e23a82a170cbdd 100644 (file)
--- a/target/linux/ramips/dts/rt2880.dtsi
+++ b/target/linux/ramips/dts/rt2880.dtsi
@@ -4,8 +4,12 @@
        compatible = "ralink,rt2880-soc";
 
        cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                cpu@0 {
                        compatible = "mips,mips24KEc";
+                       reg = <0>;
                };
        };
 
@@ -13,27 +17,31 @@
                bootargs = "console=ttyS0,57600";
        };
 
-       cpuintc: cpuintc@0 {
+       aliases {
+               serial0 = &uartlite;
+       };
+
+       cpuintc: cpuintc {
                #address-cells = <0>;
                #interrupt-cells = <1>;
                interrupt-controller;
                compatible = "mti,cpu-interrupt-controller";
        };
 
-       palmbus@300000 {
+       palmbus: palmbus@300000 {
                compatible = "palmbus";
                reg = <0x300000 0x200000>;
-                ranges = <0x0 0x300000 0x1FFFFF>;
+               ranges = <0x0 0x300000 0x1FFFFF>;
 
                #address-cells = <1>;
                #size-cells = <1>;
 
-               sysc@0 {
+               sysc: sysc@0 {
                        compatible = "ralink,rt2880-sysc";
                        reg = <0x000 0x100>;
                };
 
-               timer@100 {
+               timer: timer@100 {
                        compatible = "ralink,rt2880-timer";
                        reg = <0x100 0x20>;
 
@@ -43,7 +51,7 @@
                        status = "disabled";
                };
 
-               watchdog@120 {
+               watchdog: watchdog@120 {
                        compatible = "ralink,rt2880-wdt";
                        reg = <0x120 0x10>;
                };
@@ -59,7 +67,7 @@
                        interrupts = <2>;
                };
 
-               memc@300 {
+               memc: memc@300 {
                        compatible = "ralink,rt2880-memc";
                        reg = <0x300 0x100>;
                };
@@ -72,7 +80,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <0>;
-                       ralink,num-gpios = <24>;
+                       ralink,nr-gpio = <24>;
                        ralink,register-map = [ 00 04 08 0c
                                                20 24 28 2c
                                                30 34 ];
@@ -86,7 +94,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <24>;
-                       ralink,num-gpios = <16>;
+                       ralink,nr-gpio = <16>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
@@ -102,7 +110,7 @@
                        #gpio-cells = <2>;
 
                        ralink,gpio-base = <40>;
-                       ralink,num-gpios = <32>;
+                       ralink,nr-gpio = <32>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
@@ -110,7 +118,23 @@
                        status = "disabled";
                };
 
-               uartlite@c00 {
+               i2c: i2c@900 {
+                       compatible = "ralink,rt2880-i2c";
+                       reg = <0x900 0x100>;
+
+                       resets = <&rstctrl 9>;
+                       reset-names = "i2c";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+               };
+
+               uartlite: uartlite@c00 {
                        compatible = "ralink,rt2880-uart", "ns16550a";
                        reg = <0xc00 0x100>;
 
@@ -121,15 +145,79 @@
                };
        };
 
-       ethernet@400000 {
+       pinctrl: pinctrl {
+               compatible = "ralink,rt2880-pinmux";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&state_default>;
+
+               state_default: pinctrl0 {
+                       sdram {
+                               ralink,group = "sdram";
+                               ralink,function = "sdram";
+                       };
+               };
+
+               i2c_pins: i2c_pins {
+                       i2c_pins {
+                               ralink,group = "i2c";
+                               ralink,function = "i2c";
+                       };
+               };
+
+               spi_pins: spi_pins {
+                       spi_pins {
+                               ralink,group = "spi";
+                               ralink,function = "spi";
+                       };
+               };
+
+               uartlite_pins: uartlite {
+                       uart {
+                               ralink,group = "uartlite";
+                               ralink,function = "uartlite";
+                       };
+               };
+       };
+
+       rstctrl: rstctrl {
+               compatible = "ralink,rt2880-reset";
+               #reset-cells = <1>;
+       };
+
+       clkctrl: clkctrl {
+               compatible = "ralink,rt2880-clock";
+               #clock-cells = <1>;
+       };
+
+       pci: pci@440000 {
+               compatible = "ralink,rt288x-pci";
+               reg = <0x00440000 0x20000>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+               status = "disabled";
+       };
+
+       ethernet: ethernet@400000 {
                compatible = "ralink,rt2880-eth";
-               reg = <0x00400000 10000>;
+               reg = <0x00400000 0x10000>;
+
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               resets = <&rstctrl 18>;
+               reset-names = "fe";
 
                interrupt-parent = <&cpuintc>;
                interrupts = <5>;
 
                status = "disabled";
 
+               port@0 {
+                       compatible = "ralink,rt2880-port", "mediatek,eth-port";
+                       reg = <0>;
+               };
+
                mdio-bus {
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -138,16 +226,13 @@
                };
        };
 
-       wmac@480000 {
+       wmac: wmac@480000 {
                compatible = "ralink,rt2880-wmac";
-               reg = <0x480000 40000>;
+               reg = <0x480000 0x40000>;
 
                interrupt-parent = <&cpuintc>;
                interrupts = <6>;
 
                ralink,eeprom = "soc_wmac.eeprom";
-
-               status = "disabled";
        };
-
 };