# MT7621 Profiles
#
-define Build/seama
- $(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
- mv $@.seama $@
-endef
-
-define Build/seama-seal
- $(call Build/seama,-s $@.seama $(1))
-endef
-
-define Build/ubnt-erx-factory-compat
- echo '21001:6' > $@.compat
- $(TAR) -cf $@ --transform='s/^.*/compat/' $@.compat
- $(RM) $@.compat
-endef
-
-define Build/ubnt-erx-factory-kernel
- if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) ]; then \
- $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
+define Build/ubnt-erx-factory-image
+ if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
+ echo '21001:6' > $(1).compat; \
+ $(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
+ \
+ $(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
+ md5sum --binary $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) | awk '{print $$1}'> $(1).md5; \
+ $(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
+ \
+ echo "dummy" > $(1).rootfs; \
+ $(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
\
- md5sum --binary $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) | awk '{print $$1}'> $@.md5; \
- $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp.md5/' $@.md5; \
- $(RM) $@.md5; \
+ md5sum --binary $(1).rootfs | awk '{print $$1}'> $(1).md5; \
+ $(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
+ \
+ echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
+ $(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
+ \
+ $(CP) $(1) $(BIN_DIR)/; \
+ else \
+ echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
fi
endef
-define Build/ubnt-erx-factory-rootfs
- echo "dummy" > $@.rootfs
- $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp/' $@.rootfs
-
- md5sum --binary $@.rootfs | awk '{print $$1}'> $@.md5
- $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp.md5/' $@.md5
- $(RM) $@.md5
- $(RM) $@.rootfs
-endef
-
-define Build/ubnt-erx-factory-version
- echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $@.version
- $(TAR) -rf $@ --transform='s/^.*/version.tmp/' $@.version
- $(RM) $@.version
-endef
-
-# We need kernel+initrams fit into kernel partition
-define Build/ubnt-erx-factory-check-size
- @[ $$(($(subst k,* 1024,$(subst m, * 1024k,$(1))))) -ge "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" ] || { \
- echo "WARNING: Initramfs kernel for image $@ is too big (kernel size: $$($(TAR) -xf $@ vmlinux.tmp -O | wc -c), max size $(1))" >&2; \
- $(RM) -f $@; \
- }
-
- @[ "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" -gt 0 ] || { \
- echo "WARNING: Kernel for image $@ not found" >&2; \
- $(RM) -f $@; \
- }
-endef
-
-ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
-endif
-
define Device/mt7621
DTS := MT7621
+ BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ DEVICE_TITLE := MediaTek MT7621 EVB
endef
+TARGET_DEVICES += mt7621
define Device/wsr-600
DTS := WSR-600
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Buffalo WSR-600
endef
+TARGET_DEVICES += wsr-600
define Device/re6500
DTS := RE6500
+ DEVICE_TITLE := Linksys RE6500
endef
+TARGET_DEVICES += re6500
define Device/wsr-1166
DTS := WSR-1166
IMAGE/sysupgrade.bin := trx | pad-rootfs
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Buffalo WSR-1166
endef
+TARGET_DEVICES += wsr-1166
define Device/dir-860l-b1
DTS := DIR-860L-B1
+ BLOCKSIZE := 64k
IMAGES += factory.bin
KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGE/sysupgrade.bin := \
- append-kernel | pad-offset 65536 64 | append-rootfs | \
+ append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := \
- append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
+ append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
+ append-rootfs | pad-rootfs -x 64 | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
check-size $$$$(IMAGE_SIZE)
+ DEVICE_TITLE := D-Link DIR-860L B1
endef
+TARGET_DEVICES += dir-860l-b1
define Device/firewrt
DTS := FIREWRT
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Firefly FireWRT
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
+TARGET_DEVICES += firewrt
define Device/pbr-m1
DTS := PBR-M1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := PBR-M1
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+ kmod-rtc-pcf8563 kmod-i2c-mt7621
endef
+TARGET_DEVICES += pbr-m1
define Device/sap-g3200u3
DTS := SAP-G3200U3
+ DEVICE_TITLE := STORYLiNK SAP-G3200U3
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
+TARGET_DEVICES += sap-g3200u3
+
+define Device/timecloud
+ DTS := Timecloud
+ DEVICE_TITLE := Thunder Timecloud
+ DEVICE_PACKAGES := kmod-usb3
+endef
+TARGET_DEVICES += timecloud
define Device/witi
DTS := WITI
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := MQmaker WiTi
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+ kmod-rtc-pcf8563 kmod-i2c-mt7621
endef
+TARGET_DEVICES += witi
+
+define Device/wndr3700v5
+ DTS := WNDR3700V5
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Netgear WNDR3700v5
+ DEVICE_PACKAGES := kmod-usb3
+endef
+TARGET_DEVICES += wndr3700v5
define Device/zbt-wg2626
DTS := ZBT-WG2626
IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := ZBT WG2626
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
+endef
+TARGET_DEVICES += zbt-wg2626
+
+define Device/zbt-wg3526
+ DTS := ZBT-WG3526
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := ZBT WG3526
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
endef
+TARGET_DEVICES += zbt-wg3526
define Device/wf-2881
DTS := WF-2881
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
- IMAGE_SIZE := 132382720
- KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma
+ IMAGE_SIZE := 129280k
+ KERNEL := $(KERNEL_DTB) | pad-offset $$(BLOCKSIZE) 64 | uImage lzma
+ UBINIZE_OPTS := -E 5
IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size $$$$(IMAGE_SIZE)
+ DEVICE_TITLE := NETIS WF-2881
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
+TARGET_DEVICES += wf-2881
define Device/ubnt-erx
DTS := UBNT-ERX
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
KERNEL := $(KERNEL_DTB) | uImage lzma
- IMAGES := sysupgrade.tar $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),factory-initramfs.tar)
- IMAGE/factory-initramfs.tar := ubnt-erx-factory-compat | \
- ubnt-erx-factory-kernel | \
- ubnt-erx-factory-rootfs | \
- ubnt-erx-factory-version | \
- ubnt-erx-factory-check-size $$(KERNEL_SIZE)
- IMAGE/sysupgrade.tar := sysupgrade-nand
+ IMAGES := sysupgrade.tar
+ KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
+ IMAGE/sysupgrade.tar := sysupgrade-tar
+ DEVICE_TITLE := Ubiquiti EdgeRouter X
+ DEVICE_PACKAGES := -kmod-mt76 -kmod-rt2800-pci -kmod-cfg80211 -wpad-mini -iwinfo
+endef
+TARGET_DEVICES += ubnt-erx
+
+define Device/sk-wb8
+ DTS := SK-WB8
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := SamKnows Whitebox 8
+ DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev uboot-envtools
endef
+TARGET_DEVICES += sk-wb8
# FIXME: is this still needed?
define Image/Prepare
projects / openwrt / staging / wigyori.git / blobdiff