ramips: fix mac addresses of Youku YK1

[openwrt/staging/wigyori.git] / target / linux / ramips / mt7620 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index ef241ff..17fa48c
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 
 . /lib/functions.sh
 . /lib/functions/uci-defaults.sh
@@ -12,17 +11,18 @@ ramips_setup_interfaces()
        aigale,ai-br100|\
        alfa-network,ac1200rm|\
        asus,rt-n12p|\
-       dlink,dir-810l|\
        dlink,dwr-116-a1|\
        dlink,dwr-921-c1|\
        dlink,dwr-922-e2|\
+       dovado,tiny-ac|\
        ohyeah,oy-0001|\
        phicomm,psg1208|\
-       phicomm,psg1218a|\
        planex,db-wrt01|\
        planex,mzk-750dhp|\
+       ralink,mt7620a-evb|\
+       ralink,mt7620a-mt7610e-evb|\
+       ralink,mt7620a-v22sg-evb|\
        sanlinking,d240|\
-       youku,yk1|\
        zbtlink,zbt-ape522ii|\
        zbtlink,zbt-we826-16m|\
        zbtlink,zbt-we826-32m|\
@@ -40,35 +40,50 @@ ramips_setup_interfaces()
        alfa-network,tube-e4g|\
        buffalo,wmr-300|\
        dlink,dch-m225|\
+       edimax,ew-7476rpc|\
+       edimax,ew-7478ac|\
        elecom,wrh-300cr|\
+       hootoo,ht-tm05|\
        kimax,u25awf-h1|\
+       kimax,u35wf|\
+       kingston,mlw221|\
+       kingston,mlwg2|\
+       microduino,microwrt|\
        netgear,ex2700|\
        netgear,ex3700|\
+       netgear,ex6120|\
        netgear,ex6130|\
        netgear,wn3000rp-v3|\
        planex,cs-qr10|\
        planex,mzk-ex300np|\
        planex,mzk-ex750np|\
-       ravpower,wd03|\
-       sercomm,na930)
+       ravpower,rp-wd03|\
+       sercomm,na930|\
+       tplink,re200-v1|\
+       tplink,re210-v1|\
+       yukai,bocco|\
+       zbtlink,zbt-cpe102|\
+       zte,q7)
+               ucidef_add_switch "switch0"
+               ucidef_add_switch_attr "switch0" "enable" "false"
                ucidef_set_interface_lan "eth0"
                ;;
        asus,rp-n53)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
-       asus,rt-ac51u)
-               ucidef_add_switch "switch0" \
-                       "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
-               ;;
+       asus,rt-ac51u|\
+       asus,rt-ac54u|\
        asus,rt-n14u|\
        bdcom,wap2100-sk|\
+       edimax,ew-7478apc|\
        glinet,gl-mt300a|\
        glinet,gl-mt300n|\
        glinet,gl-mt750|\
        hiwifi,hc5661|\
        wrtnode,wrtnode|\
-       zbtlink,zbt-wa05)
+       zbtlink,zbt-wa05|\
+       zyxel,keenetic-omni-ii)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
@@ -90,6 +105,14 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
                ;;
+       dlink,dir-810l|\
+       netgear,jwnr2010-v5|\
+       phicomm,psg1218a|\
+       trendnet,tew-810dr|\
+       zbtlink,zbt-we2026)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+               ;;
        dlink,dwr-118-a1)
                ucidef_add_switch "switch0" \
                        "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
@@ -98,21 +121,17 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
                ;;
+       dlink,dwr-960)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0"
+               ;;
        edimax,br-6478ac-v2|\
+       lb-link,bl-w1200|\
        tplink,archer-c2-v1)
-               ucidef_add_switch "switch1" \
-                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
-               ;;
-       edimax,ew-7476rpc|\
-       edimax,ew-7478ac|\
-       kimax,u35wf|\
-       microduino,microwrt|\
-       yukai,bocco|\
-       zbtlink,zbt-cpe102|\
-       zte,q7)
                ucidef_add_switch "switch0"
                ucidef_add_switch_attr "switch0" "enable" "false"
-               ucidef_set_interface_lan "eth0"
+               ucidef_add_switch "switch1" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
        engenius,esr600)
                ucidef_add_switch "switch0" \
@@ -135,15 +154,16 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "5:wan" "6@eth0"
                ;;
        iodata,wn-ac1167gr|\
-       iodata,wn-ac733gr3)
+       iodata,wn-ac733gr3|\
+       iptime,a1004ns)
+               ucidef_add_switch "switch0"
+               ucidef_add_switch_attr "switch0" "enable" "false"
                ucidef_add_switch "switch1" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
-       kingston,mlw221)
-               ucidef_set_interface_lan "eth0.2"
-               ;;
-       kingston,mlwg2)
-               ucidef_set_interface_lan "eth0.1"
+       iptime,a104ns)
+               ucidef_add_switch "switch0" \
+                       "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
        lava,lr-25g001)
                ucidef_add_switch "switch0" \
@@ -159,7 +179,10 @@ ramips_setup_interfaces()
                        "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
                ;;
        linksys,e1700|\
+       netis,wf2770|\
        ralink,mt7620a-mt7530-evb)
+               ucidef_add_switch "switch0"
+               ucidef_add_switch_attr "switch0" "enable" "false"
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
@@ -168,7 +191,8 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "4:lan" "0:wan" "6@eth0"
                ;;
-       phicomm,k2g)
+       phicomm,k2g|\
+       wavlink,wl-wn530hg4)
                ucidef_add_switch "switch0" \
                        "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
                ;;
@@ -191,25 +215,18 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "4:wan" "6@eth0"
                ;;
-       zbtlink,zbt-we1026-5g-16m)
+       youku,yk1)
                ucidef_add_switch "switch0" \
-                       "0:lan" "6t@eth0"
+                       "0:lan" "1:lan" "4:wan" "6@eth0"
                ;;
-       zbtlink,zbt-we2026)
-               ucidef_add_switch "switch0" \
-                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
-               ;;
-       zyxel,keenetic-omni-ii)
+       zbtlink,zbt-we1026-5g-16m)
                ucidef_add_switch "switch0" \
-                       "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+                       "0:lan" "6t@eth0"
                ;;
        zyxel,keenetic-viva)
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
                ;;
-       *)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ;;
        esac
 }
 
@@ -222,35 +239,21 @@ ramips_setup_macs()
 
        case $board in
        aigale,ai-br100|\
-       alfa-network,ac1200rm|\
-       asus,rt-ac51u|\
        asus,rt-n12p|\
        asus,rt-n14u|\
        bdcom,wap2100-sk|\
-       dlink,dir-810l|\
        edimax,ew-7478apc|\
        fon,fon2601|\
        head-weblink,hdrm200|\
+       netgear,jwnr2010-v5|\
        nexx,wt3020-4m|\
        nexx,wt3020-8m|\
        phicomm,psg1208|\
-       phicomm,psg1218a|\
-       phicomm,psg1218b|\
        planex,db-wrt01|\
        planex,mzk-750dhp|\
-       ralink,mt7620a-evb|\
-       ralink,mt7620a-mt7530-evb|\
-       ralink,mt7620a-mt7610e-evb|\
-       ralink,mt7620a-v22sg-evb|\
        sanlinking,d240|\
-       tplink,archer-c2-v1|\
-       tplink,archer-c20-v1|\
-       tplink,archer-c20i|\
-       tplink,archer-c50-v1|\
-       tplink,archer-mr200|\
        vonets,var11n-300|\
        wrtnode,wrtnode|\
-       youku,yk1|\
        zbtlink,zbt-ape522ii|\
        zbtlink,zbt-wa05|\
        zbtlink,zbt-we2026|\
@@ -258,13 +261,22 @@ ramips_setup_macs()
        zbtlink,zbt-we826-32m|\
        zbtlink,zbt-we826-e|\
        zbtlink,zbt-wr8305rt)
-               wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+               ;;
+       alfa-network,ac1200rm|\
+       dlink,dir-810l|\
+       trendnet,tew-810dr)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
                ;;
        alfa-network,r36m-e4g|\
        zbtlink,zbt-we1026-h-32m)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
+       asus,rt-ac51u|\
+       asus,rt-ac54u)
+               lan_mac=$(mtd_get_mac_binary factory 0x22)
+               ;;
        dlink,dch-m225)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
                ;;
@@ -274,6 +286,7 @@ ramips_setup_macs()
        dlink,dwr-118-a2|\
        dlink,dwr-921-c1|\
        dlink,dwr-922-e2|\
+       dlink,dwr-960|\
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -284,7 +297,7 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
                ;;
        edimax,br-6478ac-v2)
-               wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
                ;;
        engenius,esr600)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -293,7 +306,7 @@ ramips_setup_macs()
        glinet,gl-mt300a|\
        glinet,gl-mt300n|\
        glinet,gl-mt750)
-               wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4000)" 1)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
        hiwifi,hc5661|\
@@ -308,15 +321,40 @@ ramips_setup_macs()
        iodata,wn-ac733gr3)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       iptime,a1004ns)
+               wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
+               ;;
+       iptime,a104ns)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary u-boot 0x1fc20)" 2)
+               ;;
+       lb-link,bl-w1200|\
+       phicomm,k2g|\
+       phicomm,psg1218a|\
+       phicomm,psg1218b)
+               wan_mac=$(mtd_get_mac_binary factory 0x2e)
+               label_mac=$wan_mac
+               ;;
        lenovo,newifi-y1|\
        lenovo,newifi-y1s|\
        ohyeah,oy-0001|\
-       phicomm,k2g)
+       wavlink,wl-wn530hg4|\
+       youku,yk1)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
                ;;
        linksys,e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       netis,wf2770)
+               wan_mac=$(mtd_get_mac_binary factory 0x2e)
+               label_mac=$wan_mac
+               ;;
+       tplink,archer-c2-v1|\
+       tplink,archer-c20-v1|\
+       tplink,archer-c20i|\
+       tplink,archer-c50-v1|\
+       tplink,archer-mr200)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1)
+               ;;
        zbtlink,zbt-we1026-5g-16m)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;