X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2FKconfig.openwrt;h=9e1b50e262a8aee63bf5ea7390912fdd343472a7;hp=f1bfcb80a414dff2efea9de1aaa8eea8742c6b25;hb=c198ca682c187e61730119134e1dde75da2e7a16;hpb=6ae71708c9ced26961f73286d794e1aafedd6c52

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index f1bfcb80a4..9e1b50e262 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -280,6 +280,17 @@ config ATH79_MACH_SOM9331
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_SR3200
+	bool "YunCore SR3200 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_BHR_4GRV2
 	bool "Buffalo BHR-4GRV2 board support"
 	select SOC_QCA955X
@@ -425,6 +436,16 @@ config ATH79_MACH_WPJ558
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_XD3200
+	bool "YunCore XD3200 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_DGL_5500_A1
 	bool "D-Link DGL-5500 A1 support"
 	select SOC_QCA955X