X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Fipq40xx%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=22ac6eefc59a221bfac2fad6f9f342ec95d953f9;hp=7a9cf6873e7d68c2b8a84037654065312df96217;hb=52b8c7a8928ccdc80436c76955f237960ea3bf1f;hpb=6f6c00cfc95f603a533ff142cc0e1d34a4ab0588

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7a9cf6873e..22ac6eefc5 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -45,11 +45,18 @@ case "$FIRMWARE" in
 	case "$board" in
 	8dev,jalapeno |\
 	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
+	ezviz,cs-w3-wd1200g-eup |\
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x1000 0x2f20
 		;;
+	aruba,ap-303 |\
+	aruba,ap-303h)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
+		;;
 	asus,map-ac2200)
 		caldata_extract_ubi "Factory" 0x1000 0x2f20
 		;;
@@ -61,6 +68,7 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
 	avm,fritzrepeater-3000)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -69,6 +77,7 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
+	compex,wpj419 |\
 	compex,wpj428 |\
 	engenius,eap1300 |\
 	openmesh,a42 |\
@@ -78,6 +87,10 @@ case "$FIRMWARE" in
 	unielec,u4019-32m)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+		;;
 	engenius,ens620ext)
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
@@ -107,11 +120,18 @@ case "$FIRMWARE" in
 	case "$board" in
 	8dev,jalapeno |\
 	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
+	ezviz,cs-w3-wd1200g-eup |\
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x5000 0x2f20
 		;;
+	aruba,ap-303 |\
+	aruba,ap-303h)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+		;;
 	asus,map-ac2200)
 		caldata_extract_ubi "Factory" 0x5000 0x2f20
 		;;
@@ -123,6 +143,7 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
 	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
 	avm,fritzrepeater-3000)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
@@ -131,15 +152,20 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
+	compex,wpj419 |\
 	compex,wpj428 |\
 	engenius,eap1300 |\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |
+	qxwlan,e2600ac-c2 |\
 	unielec,u4019-32m)
 		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		;;
 	engenius,ens620ext)
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)