X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=b7d23da53da6b13ac2df4ffe9148eb203cad0218;hp=efe631c99e7c2f0146b402ab894c878462877e80;hb=20f48c8ae334f8502e756282995cc84d89fa81c1;hpb=63d7f7fc925ebfa3aba7e65837676d2ba85c1c69

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index efe631c99e..b7d23da53d 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -135,12 +135,16 @@ lantiq,easy80920-nand|lantiq,easy80920-nor)
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
-avm,fritz3370)
+avm,fritz3370-rev2-hynix|\
+avm,fritz3370-rev2-micron)
 	annex="b"
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
-	ucidef_set_interface_lan 'eth0'
+	lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+	wan_mac=$(macaddr_add "$lan_mac" 3)
+	ucidef_add_switch "switch0" \
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
+avm,fritz7312|\
 avm,fritz7320)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
@@ -154,6 +158,14 @@ avm,fritz7360sl)
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
+avm,fritz7412)
+	tffsdev=$(find_mtd_chardev "nand-tffs")
+	annex="b"
+	lan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n maca)
+	wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 siemens,gigaset-sx76x)
 	annex="b"
 	ucidef_add_switch "switch0" \
@@ -188,10 +200,10 @@ arcadyan,vg3503j)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"2:lan:1" "4:lan:2" "6t@eth0"
+		"2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
-tplink,vr200v)
+tplink,vr200|tplink,vr200v)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
@@ -229,7 +241,7 @@ buffalo,wbmr-300hpd)
 esac
 
 ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
-	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
+	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
 
 if lantiq_is_vdsl_system; then
 	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"