X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FATP-52B.dts;h=2fa5c19d04f388b9ff8c6e8532d783d1c7697677;hp=c3f42bfea54f8647b45345c005b4c5cde86846a2;hb=dd3ec40d3d07f9fb419936b27f386217a0c68fb0;hpb=102073ca17b91c079cd150be0feb30796721f6da

diff --git a/target/linux/ramips/dts/ATP-52B.dts b/target/linux/ramips/dts/ATP-52B.dts
index c3f42bfea5..2fa5c19d04 100644
--- a/target/linux/ramips/dts/ATP-52B.dts
+++ b/target/linux/ramips/dts/ATP-52B.dts
@@ -1,18 +1,19 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-	compatible = "ATP-52B", "ralink,rt3052-soc";
+	compatible = "argus,atp-52b", "ralink,rt3052-soc";
 	model = "Argus ATP-52B";
 
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-				ralink,function = "gpio";
-			};
-		};
+	aliases {
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
 	};
 
 	cfi@1f000000 {
@@ -20,77 +21,90 @@
 		reg = <0x1f000000 0x800000>;
 		bank-width = <2>;
 		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@30000 {
-			label = "config";
-			reg = <0x30000 0x10000>;
-		};
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
 
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-		};
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+			};
 
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x7a0000>;
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7a0000>;
+			};
 		};
 	};
 
-	gpio-leds {
+	leds {
 		compatible = "gpio-leds";
 
-		run {
+		led_run: run {
 			label = "atp-52b:green:run";
-			gpios = <&gpio0 9 1>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
 		net {
 			label = "atp-52b:amber:net";
-			gpios = <&gpio0 13 1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio-keys-polled {
+	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		wps {
 			label = "wps";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x211>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
+};
 
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
 	};
+};
 
-	esw@10110000 {
-		ralink,portmap = <0x3e>;
-	};
 
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
 
-	otg@101c0000 {
-		status = "okay";
-	};
+&esw {
+	mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+	status = "okay";
 };