X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDAP-1350.dts;h=06d490cacc8030b2daa4ed060591b37ef604d45b;hp=107acdb2c3bdd008e420fd5d73103a6ce3bd02a6;hb=dd3ec40d3d07f9fb419936b27f386217a0c68fb0;hpb=70b192f57358f753842cbe1f8f82e26e8c6f9e1e diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts index 107acdb2c3..06d490cacc 100644 --- a/target/linux/ramips/dts/DAP-1350.dts +++ b/target/linux/ramips/dts/DAP-1350.dts @@ -9,6 +9,13 @@ compatible = "dlink,dap-1350", "ralink,rt3052-soc"; model = "D-Link DAP-1350"; + aliases { + led-boot = &led_power_blue; + led-failsafe = &led_power_blue; + led-running = &led_power_blue; + led-upgrade = &led_power_blue; + }; + chosen { bootargs = "console=ttyS0,115200"; }; @@ -18,43 +25,48 @@ reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - devdata: partition@30000 { - label = "devdata"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - label = "devconf"; - reg = <0x40000 0x30000>; - read-only; - }; - - partition@70000 { - label = "devlang"; - reg = <0x70000 0x40000>; - read-only; - }; - partition@b0000 { - label = "firmware"; - reg = <0xb0000 0x750000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + devdata: partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x30000>; + read-only; + }; + + partition@70000 { + label = "devlang"; + reg = <0x70000 0x40000>; + read-only; + }; + + partition@b0000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0xb0000 0x750000>; + }; }; }; - gpio-leds { + leds { compatible = "gpio-leds"; - power { + led_power_blue: power { label = "dap-1350:blue:power"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; @@ -70,10 +82,8 @@ }; }; - gpio-keys-polled { + keys { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; reset {