X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FHPM.dts;h=9d50697d887e95a8e6e1da371dbd098037a3c383;hp=03bf71064ff2d2eea38a560e7efa5609f7870f5e;hb=99045dfc5989e732f671de5d145532f0fe8c0ce1;hpb=713c81e97b5b9557bcb6e6e9dc2308d20f8dbf23

diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts
index 03bf71064f..9d50697d88 100644
--- a/target/linux/ramips/dts/HPM.dts
+++ b/target/linux/ramips/dts/HPM.dts
@@ -1,97 +1,30 @@
 /dts-v1/;
 
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-	compatible = "HPM", "ralink,rt3883-soc";
+	compatible = "omnima,hpm", "ralink,rt3883-soc";
 	model = "Omnima HPM";
 
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	palmbus@10000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				compatible = "macronix,mx25l12805d";
-				spi-max-frequency = <25000000>;
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					reg = <0x0 0x0030000>;
-					label = "u-boot";
-					read-only;
-				};
-
-				partition@30000 {
-					reg = <0x00030000 0x00010000>;
-					label = "config";
-					read-only;
-				};
-
-				factory: partition@40000 {
-					reg = <0x00040000 0x00010000>;
-					label = "factory";
-					read-only;
-				};
-
-				partition@50000 {
-					reg = <0x00050000 0x00fb0000>;
-					label = "firmware";
-				};
-			};
-		};
+	aliases {
+		led-status = &led_status;
 	};
 
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "uartf";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		phy-handle = <&phy0>;
-		phy-mode = "rgmii";
-		mtd-mac-address = <&factory 0x28>;
-
-		mdio-bus {
-			status = "okay";
-
-			phy0: ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	ehci@101c0000 {
-		status = "okay";
-	};
-
-	ohci@101c1000 {
-		status = "okay";
+	chosen {
+		bootargs = "console=ttyS0,115200";
 	};
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 14 0>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
 
@@ -100,32 +33,34 @@
 
 		power {
 			label = "hpm:orange:power";
-			gpios = <&gpio0 7 1>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
-		status {
+		led_status: status {
 			label = "hpm:green:status";
-			gpios = <&gpio0 21 1>;
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		eth {
 			label = "hpm:green:eth";
-			gpios = <&gpio0 20 1>;
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
 		eth2 {
 			label = "hpm:red:eth";
-			gpios = <&gpio0 18 1>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
 		wifi {
 			label = "hpm:green:wifi";
-			gpios = <&gpio0 17 1>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
 		wifi2 {
 			label = "hpm:red:wifi";
-			gpios = <&gpio0 19 1>;
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -137,13 +72,87 @@
 		usb0 {
 			gpio-export,name = "usb0";
 			gpio-export,output = <1>;
-			gpios = <&gpio0 2 0>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb1 {
 			gpio-export,name = "usb1";
 			gpio-export,output = <1>;
-			gpios = <&gpio0 1 0>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x0030000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x00030000 0x00010000>;
+				label = "config";
+				read-only;
+			};
+
+			factory: partition@40000 {
+				reg = <0x00040000 0x00010000>;
+				label = "factory";
+				read-only;
+			};
+
+			partition@50000 {
+				reg = <0x00050000 0x00fb0000>;
+				label = "firmware";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "jtag", "uartf";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii";
+	mtd-mac-address = <&factory 0x28>;
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};