X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWZR-AGL300NH.dts;h=c6a90d426a3d2b7624c0c7433d5eb4c6764ed1eb;hp=5d6c25d2cf7ee811e6dd211787c48c771a551e82;hb=dd3ec40d3d07f9fb419936b27f386217a0c68fb0;hpb=553fea9f195aaefa8533b99e0d0c9ff9a27fc4f5

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 5d6c25d2cf..c6a90d426a 100644
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -1,26 +1,21 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
+	compatible = "buffalo,wzr-agl300nh", "ralink,rt2880-soc";
 	model = "Buffalo WZR-AGL300NH";
 
-	palmbus@300000 {
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uartlite", "mdio";
-				ralink,function = "gpio";
-			};
-		};
+	aliases {
+		led-boot = &led_router;
+		led-failsafe = &led_router;
+		led-running = &led_router;
+		led-upgrade = &led_router;
 	};
 
 	cfi@1f000000 {
@@ -28,116 +23,127 @@
 		reg = <0x1f000000 0x800000>;
 		bank-width = <2>;
 		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		partition@0 {
-			label = "uboot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@30000 {
-			label = "uboot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x3b0000>;
-		};
-	};
-
-	ethernet@400000 {
-		status = "okay";
-		mtd-mac-address = <&factory 0x4>;
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
 
-		port@0 {
-			ralink,fixed-link = <1000 1 1 1>;
-		};
+			partition@30000 {
+				label = "uboot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
 
-		mdio-bus {
-			status = "okay";
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
 
-			phy0: ethernet-phy@0 {
-				phy-mode = "mii";
-				reg = <0>;
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x3b0000>;
 			};
 		};
 	};
 
 	rtl8366s {
 		compatible = "realtek,rtl8366s";
-		gpio-sda = <&gpio0 1 0>;
-		gpio-sck = <&gpio0 2 0>;
+		gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	wmac@480000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	gpio-keys-polled {
+	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		wps {
 			label = "wps";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x211>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
 		};
 
 		router {
 			label = "router_switch";
-			gpios = <&gpio0 7 0>;
-			linux,code = <0x100>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_0>;
 		};
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 9 1>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
 
-	gpio-leds {
+	leds {
 		compatible = "gpio-leds";
 
-		router {
-			label = "buffalo:green:router";
-			gpios = <&gpio0 8 1>;
+		led_router: router {
+			label = "wzr-agl300nh:green:router";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
 		diag {
-			label = "buffalo:red:diag";
-			gpios = <&gpio0 12 1>;
+			label = "wzr-agl300nh:red:diag";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
 
 		security_g {
-			label = "buffalo:orange:security_g";
-			gpios = <&gpio0 11 1>;
+			label = "wzr-agl300nh:orange:security_g";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
 		security_n {
-			label = "buffalo:orange:security_n";
-			gpios = <&gpio0 13 1>;
+			label = "wzr-agl300nh:orange:security_n";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartlite", "mdio";
+			ralink,function = "gpio";
 		};
 	};
+};
 
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x4>;
 
-	pcibus0: pci@00440000 {
-		compatible = "ralink,rt288x-pci";
-		reg = <0x00440000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		status = "ok";
+	port@0 {
+		mediatek,fixed-link = <1000 1 1 1>;
 	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&pci {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
 };