ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)
authorDavid Musil <0x444d@protonmail.com>
Sat, 16 Apr 2022 12:01:31 +0000 (12:01 +0000)
committerPetr Štetiar <ynezz@true.cz>
Mon, 18 Apr 2022 05:24:09 +0000 (07:24 +0200)
commite20de224427008e0f26161f924bc347d974fd15a
tree95e531d29abceae8b6446726237c7a0f96a17d0c
parent7dc52a78ae2c2f748a0c0c4adcb13979260b3498
ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)

The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small
2.4 GHz 802.11b/g/n PoE-capable AP.

Specifications:
 - SoC: Qualcomm Atheros QCA9533
 - Flash: 16 MB (SPI)
 - RAM: 64 MB
 - Ethernet: 1x 10/100 Mbps (PoE in)
 - WiFi: AR9531 2T2R 2.4 GHz (SoC)
 - 3x green LEDs (1x lan, 1x wlan, 1x user)

 See https://mikrotik.com/product/RBwAP2nD for more info.

Flashing:
 TFTP boot initramfs image and then perform sysupgrade. Follow common
 MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.

Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d
 The network setup avoids using the integrated switch and connects the
 single Ethernet port directly. This way, link speed (10/100 Mbps) is
 properly reported by eth0.

Signed-off-by: David Musil <0x444d@protonmail.com>
target/linux/ath79/dts/qca9533_mikrotik_routerboard-wap-2nd.dts [new file with mode: 0644]
target/linux/ath79/image/mikrotik.mk
target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom