+diff --git a/nl80211.h b/nl80211.h
+index c587a61..255a971 100644
--- a/nl80211.h
+++ b/nl80211.h
-@@ -2153,6 +2153,9 @@ enum nl80211_commands {
+@@ -11,6 +11,7 @@
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015-2017 Intel Deutschland GmbH
++ * Copyright (C) 2018 Intel Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -203,7 +204,8 @@
+ * FILS shared key authentication offload should be able to construct the
+ * authentication and association frames for FILS shared key authentication and
+ * eventually do a key derivation as per IEEE 802.11ai. The below additional
+- * parameters should be given to driver in %NL80211_CMD_CONNECT.
++ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
++ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
+ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
+@@ -214,7 +216,8 @@
+ * as specified in IETF RFC 6696.
+ *
+ * When FILS shared key authentication is completed, driver needs to provide the
+- * below additional parameters to userspace.
++ * below additional parameters to userspace, which can be either after setting
++ * up a connection or after roaming.
+ * %NL80211_ATTR_FILS_KEK - used for key renewal
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
+ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
+@@ -542,7 +545,8 @@
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
++ * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
+ * %NL80211_ATTR_WIPHY_FREQ_HINT.
+ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
+ * restrictions on BSS selection, i.e., they effectively prevent roaming
+@@ -977,21 +981,58 @@
+ * only the %NL80211_ATTR_IE data is used and updated with this command.
+ *
+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
+- * for the given authenticator address (specified with &NL80211_ATTR_MAC).
+- * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
++ * for the given authenticator address (specified with %NL80211_ATTR_MAC).
++ * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
+ * PMK-R0, otherwise it specifies the PMK.
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ * configured PMK for the authenticator address identified by
+- * &NL80211_ATTR_MAC.
++ * %NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ * handshake was completed successfully by the driver. The BSSID is
+- * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
++ * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ * offload should send this event after indicating 802.11 association with
+- * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+- * &NL80211_CMD_DISCONNECT should be indicated instead.
++ * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
++ * %NL80211_CMD_DISCONNECT should be indicated instead.
++ *
++ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
++ * and RX notification. This command is used both as a request to transmit
++ * a control port frame and as a notification that a control port frame
++ * has been received. %NL80211_ATTR_FRAME is used to specify the
++ * frame contents. The frame is the raw EAPoL data, without ethernet or
++ * 802.11 headers.
++ * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
++ * indicating the protocol type of the received frame; whether the frame
++ * was received unencrypted and the MAC address of the peer respectively.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
+ *
++ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
++ * drivers that do not define separate commands for authentication and
++ * association, but rely on user space for the authentication to happen.
++ * This interface acts both as the event request (driver to user space)
++ * to trigger the authentication and command response (userspace to
++ * driver) to indicate the authentication status.
++ *
++ * User space uses the %NL80211_CMD_CONNECT command to the host driver to
++ * trigger a connection. The host driver selects a BSS and further uses
++ * this interface to offload only the authentication part to the user
++ * space. Authentication frames are passed between the driver and user
++ * space through the %NL80211_CMD_FRAME interface. Host driver proceeds
++ * further with the association after getting successful authentication
++ * status. User space indicates the authentication status through
++ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
++ * command interface.
++ *
++ * Host driver reports this status on an authentication failure to the
++ * user space through the connect result as the user space would have
++ * initiated the connection through the connect request.
++ *
++ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
++ * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
++ * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
++ * address(specified in %NL80211_ATTR_MAC).
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -1198,6 +1239,12 @@ enum nl80211_commands {
+
+ NL80211_CMD_RELOAD_REGDB,
+
++ NL80211_CMD_EXTERNAL_AUTH,
++
++ NL80211_CMD_STA_OPMODE_CHANGED,
++
++ NL80211_CMD_CONTROL_PORT_FRAME,
++
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -1445,6 +1492,15 @@ enum nl80211_commands {
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ * ethertype frames used for key negotiation must not be encrypted.
++ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
++ * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
++ * will be sent directly to the network interface or sent via the NL80211
++ * socket. If this attribute is missing, then legacy behavior of sending
++ * control port frames directly to the network interface is used. If the
++ * flag is included, then control port frames are sent over NL80211 instead
++ * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
++ * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
++ * flag.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+@@ -1932,6 +1988,12 @@ enum nl80211_commands {
+ * multicast group.
+ * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ * station will deauthenticate when the socket is closed.
++ * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
++ * torn down when the socket is closed.
++ * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
++ * automatically torn down when the socket is closed.
++ * If set during %NL80211_CMD_START_AP the AP will be automatically
++ * disabled when the socket is closed.
+ *
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+ * the TDLS link initiator.
+@@ -2153,6 +2215,35 @@ enum nl80211_commands {
* @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
* @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
*
++ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
++ * authentication operation (u32 attribute with an
++ * &enum nl80211_external_auth_action value). This is used with the
++ * %NL80211_CMD_EXTERNAL_AUTH request event.
++ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
++ * space supports external authentication. This attribute shall be used
++ * only with %NL80211_CMD_CONNECT request. The driver may offload
++ * authentication processing to user space if this capability is indicated
++ * in NL80211_CMD_CONNECT requests from the user space.
++ *
++ * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
++ * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
++ *
++ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
++ * nl80211_txq_stats)
++ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
++ * The smaller of this and the memory limit is enforced.
++ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
++ * TXQ queues for this phy. The smaller of this and the packet limit is
++ * enforced.
++ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
++ * a flow is assigned on each round of the DRR scheduler.
++ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
++ * association request when used with NL80211_CMD_NEW_STATION). Can be set
++ * only if %NL80211_STA_FLAG_WME is set.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2579,6 +2582,8 @@ enum nl80211_attrs {
+@@ -2579,6 +2670,23 @@ enum nl80211_attrs {
NL80211_ATTR_PMKR0_NAME,
NL80211_ATTR_PORT_AUTHORIZED,
++ NL80211_ATTR_EXTERNAL_AUTH_ACTION,
++ NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
++
++ NL80211_ATTR_NSS,
++ NL80211_ATTR_ACK_SIGNAL,
++
++ NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
++
++ NL80211_ATTR_TXQ_STATS,
++ NL80211_ATTR_TXQ_LIMIT,
++ NL80211_ATTR_TXQ_MEMORY_LIMIT,
++ NL80211_ATTR_TXQ_QUANTUM,
++
++ NL80211_ATTR_HE_CAPABILITY,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -3862,9 +3867,6 @@ enum nl80211_bss_scan_width {
- * @NL80211_BSS_PARENT_BSSID. (u64).
- * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
- * is set.
-- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
-- * Contains a nested array of signal strength attributes (u8, dBm),
-- * using the nesting index as the antenna number.
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
+@@ -2618,6 +2726,8 @@ enum nl80211_attrs {
+ #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+ #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
++#define NL80211_WIPHY_NAME_MAXLEN 64
++
+ #define NL80211_MAX_SUPP_RATES 32
+ #define NL80211_MAX_SUPP_HT_RATES 77
+ #define NL80211_MAX_SUPP_REG_RULES 64
+@@ -2626,7 +2736,8 @@ enum nl80211_attrs {
+ #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
+ #define NL80211_HT_CAPABILITY_LEN 26
+ #define NL80211_VHT_CAPABILITY_LEN 12
+-
++#define NL80211_HE_MIN_CAPABILITY_LEN 16
++#define NL80211_HE_MAX_CAPABILITY_LEN 51
+ #define NL80211_MAX_NR_CIPHER_SUITES 5
+ #define NL80211_MAX_NR_AKM_SUITES 2
+
+@@ -2754,6 +2865,38 @@ struct nl80211_sta_flag_update {
+ } __attribute__((packed));
+
+ /**
++ * enum nl80211_he_gi - HE guard interval
++ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
++ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
++ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
++ */
++enum nl80211_he_gi {
++ NL80211_RATE_INFO_HE_GI_0_8,
++ NL80211_RATE_INFO_HE_GI_1_6,
++ NL80211_RATE_INFO_HE_GI_3_2,
++};
++
++/**
++ * enum nl80211_he_ru_alloc - HE RU allocation values
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
++ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
++ */
++enum nl80211_he_ru_alloc {
++ NL80211_RATE_INFO_HE_RU_ALLOC_26,
++ NL80211_RATE_INFO_HE_RU_ALLOC_52,
++ NL80211_RATE_INFO_HE_RU_ALLOC_106,
++ NL80211_RATE_INFO_HE_RU_ALLOC_242,
++ NL80211_RATE_INFO_HE_RU_ALLOC_484,
++ NL80211_RATE_INFO_HE_RU_ALLOC_996,
++ NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
++};
++
++/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+@@ -2785,6 +2928,13 @@ struct nl80211_sta_flag_update {
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
+ * a legacy rate and will be reported as the actual bitrate, i.e.
+ * a quarter of the base (20 MHz) rate
++ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
++ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
++ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
++ * (u8, see &enum nl80211_he_gi)
++ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
++ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
++ * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
-@@ -3888,7 +3890,6 @@ enum nl80211_bss {
- NL80211_BSS_PAD,
- NL80211_BSS_PARENT_TSF,
- NL80211_BSS_PARENT_BSSID,
-- NL80211_BSS_CHAIN_SIGNAL,
+ enum nl80211_rate_info {
+@@ -2801,6 +2951,11 @@ enum nl80211_rate_info {
+ NL80211_RATE_INFO_160_MHZ_WIDTH,
+ NL80211_RATE_INFO_10_MHZ_WIDTH,
+ NL80211_RATE_INFO_5_MHZ_WIDTH,
++ NL80211_RATE_INFO_HE_MCS,
++ NL80211_RATE_INFO_HE_NSS,
++ NL80211_RATE_INFO_HE_GI,
++ NL80211_RATE_INFO_HE_DCM,
++ NL80211_RATE_INFO_HE_RU_ALLOC,
/* keep last */
- __NL80211_BSS_AFTER_LAST,
+ __NL80211_RATE_INFO_AFTER_LAST,
+@@ -2899,6 +3054,9 @@ enum nl80211_sta_bss_param {
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
+ * received from the station (u64, usec)
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
++ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
++ * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
++ * ACK frame (s8, dBm)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+@@ -2937,6 +3095,8 @@ enum nl80211_sta_info {
+ NL80211_STA_INFO_TID_STATS,
+ NL80211_STA_INFO_RX_DURATION,
+ NL80211_STA_INFO_PAD,
++ NL80211_STA_INFO_ACK_SIGNAL,
++ NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+@@ -2954,6 +3114,7 @@ enum nl80211_sta_info {
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ * MSDUs (u64)
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
++ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+@@ -2964,6 +3125,7 @@ enum nl80211_tid_stats {
+ NL80211_TID_STATS_TX_MSDU_RETRIES,
+ NL80211_TID_STATS_TX_MSDU_FAILED,
+ NL80211_TID_STATS_PAD,
++ NL80211_TID_STATS_TXQ_STATS,
+
+ /* keep last */
+ NUM_NL80211_TID_STATS,
+@@ -2971,6 +3133,44 @@ enum nl80211_tid_stats {
+ };
+
+ /**
++ * enum nl80211_txq_stats - per TXQ statistics attributes
++ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
++ * @NUM_NL80211_TXQ_STATS: number of attributes here
++ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
++ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
++ * backlogged
++ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
++ * @NL80211_TXQ_STATS_DROPS: total number of packet drops
++ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
++ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
++ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
++ * (only for per-phy stats)
++ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
++ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
++ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
++ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
++ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
++ */
++enum nl80211_txq_stats {
++ __NL80211_TXQ_STATS_INVALID,
++ NL80211_TXQ_STATS_BACKLOG_BYTES,
++ NL80211_TXQ_STATS_BACKLOG_PACKETS,
++ NL80211_TXQ_STATS_FLOWS,
++ NL80211_TXQ_STATS_DROPS,
++ NL80211_TXQ_STATS_ECN_MARKS,
++ NL80211_TXQ_STATS_OVERLIMIT,
++ NL80211_TXQ_STATS_OVERMEMORY,
++ NL80211_TXQ_STATS_COLLISIONS,
++ NL80211_TXQ_STATS_TX_BYTES,
++ NL80211_TXQ_STATS_TX_PACKETS,
++ NL80211_TXQ_STATS_MAX_FLOWS,
++
++ /* keep last */
++ NUM_NL80211_TXQ_STATS,
++ NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
++};
++
++/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+@@ -3022,6 +3222,38 @@ enum nl80211_mpath_info {
+ };
+
+ /**
++ * enum nl80211_band_iftype_attr - Interface type data attributes
++ *
++ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
++ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
++ * for each interface type that supports the band data
++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
++ * capabilities IE
++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
++ * capabilities IE
++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
++ * capabilities IE
++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
++ * defined in HE capabilities IE
++ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
++ * defined
++ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
++ */
++enum nl80211_band_iftype_attr {
++ __NL80211_BAND_IFTYPE_ATTR_INVALID,
++
++ NL80211_BAND_IFTYPE_ATTR_IFTYPES,
++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
++
++ /* keep last */
++ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
++ NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
++};
++
++/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+@@ -3036,6 +3268,8 @@ enum nl80211_mpath_info {
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ * defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
++ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
++ * attributes from &enum nl80211_band_iftype_attr
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+@@ -3051,6 +3285,7 @@ enum nl80211_band_attr {
+
+ NL80211_BAND_ATTR_VHT_MCS_SET,
+ NL80211_BAND_ATTR_VHT_CAPA,
++ NL80211_BAND_ATTR_IFTYPE_DATA,
+
+ /* keep last */
+ __NL80211_BAND_ATTR_AFTER_LAST,
+@@ -3060,6 +3295,29 @@ enum nl80211_band_attr {
+ #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+ /**
++ * enum nl80211_wmm_rule - regulatory wmm rule
++ *
++ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
++ * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
++ * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
++ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
++ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
++ * @nl80211_WMMR_MAX: highest possible wmm rule.
++ * @__NL80211_WMMR_LAST: Internal use.
++ */
++enum nl80211_wmm_rule {
++ __NL80211_WMMR_INVALID,
++ NL80211_WMMR_CW_MIN,
++ NL80211_WMMR_CW_MAX,
++ NL80211_WMMR_AIFSN,
++ NL80211_WMMR_TXOP,
++
++ /* keep last */
++ __NL80211_WMMR_LAST,
++ NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
++};
++
++/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+@@ -3108,6 +3366,9 @@ enum nl80211_band_attr {
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
++ * This is a nested attribute that contains the wmm limitation per AC.
++ * (see &enum nl80211_wmm_rule)
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+@@ -3136,6 +3397,7 @@ enum nl80211_frequency_attr {
+ NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_NO_20MHZ,
+ NL80211_FREQUENCY_ATTR_NO_10MHZ,
++ NL80211_FREQUENCY_ATTR_WMM,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -3319,7 +3581,7 @@ enum nl80211_sched_scan_match_attr {
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ * base on contiguous rules and wider channels will be allowed to cross
+ * multiple contiguous/overlapping frequency ranges.
+- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
++ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
+@@ -4945,6 +5207,27 @@ enum nl80211_feature_flags {
+ * probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ * value in %NL80211_ATTR_USE_MFP.
++ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
++ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
++ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
++ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
++ * Device or driver will do all DFS-related actions by itself,
++ * informing user-space about CAC progress, radar detection event,
++ * channel change triggered by radar detection event.
++ * No need to start CAC from user-space, no need to react to
++ * "radar detected" event.
++ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
++ * receiving control port frames over nl80211 instead of the netdevice.
++ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack
++ * rssi if firmware support, this flag is to intimate about ack rssi
++ * support to nl80211.
++ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
++ * TXQs.
++ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
++ * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
++ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
++ * except for supported rates from the probe request content if requested
++ * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+@@ -4972,6 +5255,15 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+ NL80211_EXT_FEATURE_MFP_OPTIONAL,
++ NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
++ NL80211_EXT_FEATURE_LOW_POWER_SCAN,
++ NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
++ NL80211_EXT_FEATURE_DFS_OFFLOAD,
++ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
++ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
++ NL80211_EXT_FEATURE_TXQS,
++ NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
++ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -5032,6 +5324,10 @@ enum nl80211_timeout_reason {
+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
+ * requests.
+ *
++ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
++ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
++ * one of them can be used in the request.
++ *
+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
+@@ -5059,7 +5355,26 @@ enum nl80211_timeout_reason {
+ * and suppression (if it has received a broadcast Probe Response frame,
+ * Beacon frame or FILS Discovery frame from an AP that the STA considers
+ * a suitable candidate for (re-)association - suitable in terms of
+- * SSID and/or RSSI
++ * SSID and/or RSSI.
++ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
++ * accomplish the scan. Thus, this flag intends the driver to perform the
++ * scan request with lesser span/duration. It is specific to the driver
++ * implementations on how this is accomplished. Scan accuracy may get
++ * impacted with this flag.
++ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
++ * optimal possible power. Drivers can resort to their specific means to
++ * optimize the power. Scan accuracy may get impacted with this flag.
++ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
++ * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
++ * possible scan results. This flag hints the driver to use the best
++ * possible scan configuration to improve the accuracy in scanning.
++ * Latency and power use may get impacted with this flag.
++ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
++ * request frames from this scan to avoid correlation/tracking being
++ * possible.
++ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
++ * only have supported rates and no additional capabilities (unless
++ * added by userspace explicitly.)
+ */
+ enum nl80211_scan_flags {
+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
+@@ -5070,6 +5385,11 @@ enum nl80211_scan_flags {
+ NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,
++ NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,
++ NL80211_SCAN_FLAG_LOW_POWER = 1<<9,
++ NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
++ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
++ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
+ };
+
+ /**
+@@ -5127,6 +5447,8 @@ enum nl80211_smps_mode {
+ * non-operating channel is expired and no longer valid. New CAC must
+ * be done on this channel before starting the operation. This is not
+ * applicable for ETSI dfs domain where pre-CAC is valid for ever.
++ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
++ * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
+ */
+ enum nl80211_radar_event {
+ NL80211_RADAR_DETECTED,
+@@ -5134,6 +5456,7 @@ enum nl80211_radar_event {
+ NL80211_RADAR_CAC_ABORTED,
+ NL80211_RADAR_NOP_FINISHED,
+ NL80211_RADAR_PRE_CAC_EXPIRED,
++ NL80211_RADAR_CAC_STARTED,
+ };
+
+ /**
+@@ -5425,11 +5748,11 @@ enum nl80211_nan_func_attributes {
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
+ * This is a flag.
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
+- * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
++ * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
+- * &NL80211_NAN_SRF_BF is present. This is a u8.
++ * %NL80211_NAN_SRF_BF is present. This is a u8.
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
+- * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
++ * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
+ * attribute. Each nested attribute is a MAC address.
+ * @NUM_NL80211_NAN_SRF_ATTR: internal
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
+@@ -5469,4 +5792,15 @@ enum nl80211_nan_match_attributes {
+ NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
+ };
+
++/**
++ * nl80211_external_auth_action - Action to perform with external
++ * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
++ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
++ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
++ */
++enum nl80211_external_auth_action {
++ NL80211_EXTERNAL_AUTH_START,
++ NL80211_EXTERNAL_AUTH_ABORT,
++};
++
+ #endif /* __LINUX_NL80211_H */
projects / openwrt / staging / wigyori.git / commitdiff