ramips: fix leds for TP-Link Archer C20 v4

- add "gpio" group for wan_orange led
- use tpt triggers for wifi led indication
- add wifi 5 GHz led support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[slight commit message adjustment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts b/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts
index 502c271ae26a79461391564df979282ae7b04677..8e3df9c67639972a3fb2f1dbf1069ffb07b29a6d 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts
+++ b/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts
@@ -42,11 +42,13 @@
                wlan5g {
                        label = "archer-c20-v4:green:wlan5g";
                        gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
                };
 
                wlan2g {
                        label = "archer-c20-v4:green:wlan2g";
                        gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
                };
 
                wps {
@@ -82,7 +84,7 @@
 
 &state_default {
        gpio {
-               ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
+               ralink,group = "i2s", "gpio", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
                ralink,function = "gpio";
        };
 };

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index f410c47eac606deca6f518805cbad0d33322d25a..06b78eb195a9b4cc0a46496c2860b7528618cba9 100755 (executable)
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -55,7 +55,6 @@ tama,w06)
 tplink,archer-c20-v4)
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
        ;;
 tplink,archer-c50-v3|\
 tplink,archer-c50-v4)