rb532: remove 3.8 support
authorGabor Juhos <juhosg@openwrt.org>
Tue, 24 Sep 2013 13:17:45 +0000 (13:17 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Tue, 24 Sep 2013 13:17:45 +0000 (13:17 +0000)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38160

target/linux/rb532/config-3.8 [deleted file]
target/linux/rb532/patches-3.8/001-cmdline_hack.patch [deleted file]
target/linux/rb532/patches-3.8/002-rb532_nand_fixup.patch [deleted file]

diff --git a/target/linux/rb532/config-3.8 b/target/linux/rb532/config-3.8
deleted file mode 100644 (file)
index 84da54d..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ATA=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CSRC_R4K=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EXT4_FS=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_JBD2=y
-CONFIG_KEXEC=y
-CONFIG_KORINA=y
-CONFIG_LEDS_MIKROTIK_RB532=y
-CONFIG_MIKROTIK_RB532=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
-# CONFIG_MTD_ROOTFS_SPLIT is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PATA_RB532=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RC32434_WDT=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SWAP is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_VIA_RHINE=y
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/rb532/patches-3.8/001-cmdline_hack.patch b/target/linux/rb532/patches-3.8/001-cmdline_hack.patch
deleted file mode 100644 (file)
index d27184d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/rb532/prom.c
-+++ b/arch/mips/rb532/prom.c
-@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char
-       return simple_strtoul(num, 0, 10);
- }
-+extern char __image_cmdline[];
- void __init prom_setup_cmdline(void)
- {
-       static char cmd_line[COMMAND_LINE_SIZE] __initdata;
-@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
-       }
-       *(cp++) = ' ';
-+      strcpy(cp,(__image_cmdline));
-+      cp += strlen(__image_cmdline);
-+
-       i = strlen(arcs_cmdline);
-       if (i > 0) {
-               *(cp++) = ' ';
diff --git a/target/linux/rb532/patches-3.8/002-rb532_nand_fixup.patch b/target/linux/rb532/patches-3.8/002-rb532_nand_fixup.patch
deleted file mode 100644 (file)
index f1124a1..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/rb532/devices.c
-+++ b/arch/mips/rb532/devices.c
-@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 =
- };
- /* Resources and device for NAND */
-+
-+/*
-+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
-+ * will not be able to find the kernel that we load.  So set the oobinfo
-+ * when creating the partitions
-+ */
-+static struct nand_ecclayout rb532_nand_ecclayout = {
-+      .eccbytes       = 6,
-+      .eccpos         = { 8, 9, 10, 13, 14, 15 },
-+      .oobavail       = 9,
-+      .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
- static int rb532_dev_ready(struct mtd_info *mtd)
- {
-       return gpio_get_value(GPIO_RDY);
-@@ -275,6 +288,16 @@ static void __init parse_mac_addr(char *
- /* NAND definitions */
- #define NAND_CHIP_DELAY       25
-+static int rb532_nand_fixup(struct mtd_info *mtd)
-+{
-+      struct nand_chip *chip = mtd->priv;
-+
-+      if (mtd->writesize == 512)
-+              chip->ecc.layout = &rb532_nand_ecclayout;
-+
-+      return 0;
-+}
-+
- static void __init rb532_nand_setup(void)
- {
-       switch (mips_machtype) {
-@@ -293,6 +316,7 @@ static void __init rb532_nand_setup(void
-       rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
-       rb532_nand_data.chip.partitions = rb532_partition_info;
-       rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
-+      rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
- }