ath79: add tl-wr1043nd-v4 support everything is working
authorLucian Cristian <lucian.cristian@gmail.com>
Sat, 16 Jun 2018 10:37:55 +0000 (13:37 +0300)
committerJohn Crispin <john@phrozen.org>
Mon, 18 Jun 2018 16:21:20 +0000 (18:21 +0200)
tplink-safeloader: resize kernel partition
kernel 4.14 is much bigger, resize the partition

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/dts/qca9563_tl-wr1043n.dtsi [new file with mode: 0644]
target/linux/ath79/dts/qca9563_tl-wr1043nd-v4.dts [new file with mode: 0644]
target/linux/ath79/image/generic-tp-link.mk
tools/firmware-utils/src/tplink-safeloader.c

index d1906f9..92b7e7d 100755 (executable)
@@ -25,6 +25,13 @@ case "$board" in
 "tplink,tl-mr3020-v1")
        ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x02"
        ;;
+"tplink,tl-wr1043nd-v4")
+       ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+       ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+       ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+       ;;
 "tplink,tl-wr740n-v2")
        ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
index 6a344b7..88cdd4f 100755 (executable)
@@ -48,6 +48,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
+       "tplink,tl-wr1043nd-v4")
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+               ;;
        "netgear,wndr3800")
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/dts/qca9563_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tl-wr1043n.dtsi
new file mode 100644 (file)
index 0000000..136a6f8
--- /dev/null
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-status = &system;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               system: system {
+                       label = "tp-link:green:system";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "heartbeat";
+               };
+
+               usb {
+                       label = "tp-link:green:usb";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       trigger-sources = <&hub_port0>;
+                       linux,default-trigger = "usbport";
+               };
+
+               wifi_green {
+                       label = "tp-link:green:wlan";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wifi_wps {
+                       label = "tp-link:green:wps";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               wan {
+                       label = "tp-link:green:wan";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan1 {
+                       label = "tp-link:green:lan1";
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan2 {
+                       label = "tp-link:green:lan2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan3 {
+                       label = "tp-link:green:lan3";
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan4 {
+                       label = "tp-link:green:lan4";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wifi {
+                       label = "RFKILL button";
+                       linux,code = <KEY_RFKILL>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       gpio-export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               gpio_usb_power {
+                       gpio-export,name = "tp-link:power:usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+
+       hub_port0: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x020000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x020000 0xf30000>;
+                       };
+
+                       info: partition@f50000 {
+                               label = "product-info";
+                               reg = <0xf50000 0x020000>;
+                               read-only;
+                       };
+
+                       partition@f70000 {
+                               label = "config";
+                               reg = <0xf70000 0x050000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "partition-table";
+                               reg = <0xfc0000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@fd0000 {
+                               label = "logs";
+                               reg = <0xfd0000 0x020000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "ART";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "sgmii";
+
+               qca,ar8327-initvals = <
+                   0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                   0x7c 0x0000007e /* PORT0_STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       mtd-mac-address = <&info 0x8>;
+       phy-handle = <&phy0>;
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/dts/qca9563_tl-wr1043nd-v4.dts b/target/linux/ath79/dts/qca9563_tl-wr1043nd-v4.dts
new file mode 100644 (file)
index 0000000..e187de7
--- /dev/null
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9563_tl-wr1043n.dtsi"
+
+/ {
+       compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
+       model = "TP-Link TL-WR1043ND Version 4";
+};
index 0b4659a..c946970 100644 (file)
@@ -1,16 +1,5 @@
 include ./common-tp-link.mk
 
-
-define Device/tl-wr1043nd-v1
-  $(Device/tplink-8m)
-  ATH_SOC := ar9132
-  DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
-  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
-  TPLINK_HWID := 0x10430001
-  SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
-endef
-TARGET_DEVICES += tl-wr1043nd-v1
-
 define Device/tl-wdr3600
   $(Device/tplink-8mlzma)
   ATH_SOC := ar9344
@@ -28,3 +17,28 @@ define Device/tl-wdr4300
   SUPPORTED_DEVICES := tplink,tl-wdr4300 tl-wdr4300
 endef
 TARGET_DEVICES += tl-wdr4300
+
+define Device/tl-wr1043nd-v1
+  $(Device/tplink-8m)
+  ATH_SOC := ar9132
+  DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+  TPLINK_HWID := 0x10430001
+  SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
+endef
+TARGET_DEVICES += tl-wr1043nd-v1
+
+define Device/tl-wr1043nd-v4
+  $(Device/tplink)
+  ATH_SOC := qca9563
+  IMAGE_SIZE := 15552k
+  DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+  TPLINK_HWID := 0x10430004
+  TPLINK_BOARD_ID := TLWR1043NDV4
+  KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
+  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+  SUPPORTED_DEVICES := tplink,tl-wr1043nd-v4 tl-wr1043nd-v4
+endef
+TARGET_DEVICES += tl-wr1043nd-v4
index 22bbc17..27c5aa8 100644 (file)
@@ -779,8 +779,8 @@ static struct device_info boards[] = {
                */
                .partitions = {
                        {"fs-uboot", 0x00000, 0x20000},
-                       {"os-image", 0x20000, 0x180000},
-                       {"file-system", 0x1a0000, 0xdb0000},
+                       {"os-image", 0x20000, 0x200000},
+                       {"file-system", 0x220000, 0xd30000},
                        {"default-mac", 0xf50000, 0x00200},
                        {"pin", 0xf50200, 0x00200},
                        {"product-info", 0xf50400, 0x0fc00},