+++ /dev/null
-Index: gcc-4.2.3/configure.in
-===================================================================
---- gcc-4.2.3.orig/configure.in 2007-09-15 02:42:24.000000000 +0200
-+++ gcc-4.2.3/configure.in 2008-05-21 13:45:54.101287819 +0200
-@@ -503,6 +503,9 @@
- arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
- ;;
-+ avr32-*-*)
-+ noconfigdirs="$noconfigdirs target-libiberty target-libmudflap target-libffi ${libgcj}"
-+ ;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
- ;;
-Index: gcc-4.2.3/gcc/builtins.c
-===================================================================
---- gcc-4.2.3.orig/gcc/builtins.c 2008-01-23 11:38:21.000000000 +0100
-+++ gcc-4.2.3/gcc/builtins.c 2008-05-21 13:45:54.109288559 +0200
-@@ -9223,7 +9223,7 @@
-
- do
- {
-- code = va_arg (ap, enum tree_code);
-+ code = va_arg (ap, int);
- switch (code)
- {
- case 0:
-Index: gcc-4.2.3/gcc/calls.c
-===================================================================
---- gcc-4.2.3.orig/gcc/calls.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/calls.c 2008-05-21 13:45:54.117288181 +0200
-@@ -3447,7 +3447,7 @@
- for (; count < nargs; count++)
- {
- rtx val = va_arg (p, rtx);
-- enum machine_mode mode = va_arg (p, enum machine_mode);
-+ enum machine_mode mode = va_arg (p, int);
-
- /* We cannot convert the arg value to the mode the library wants here;
- must do it earlier where we know the signedness of the arg. */
-Index: gcc-4.2.3/gcc/config/avr32/avr32.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32.c 2008-05-21 13:45:54.145288116 +0200
-@@ -0,0 +1,7060 @@
-+/*
-+ Target hooks and helper functions for AVR32.
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+ Initial porting by Anders �dland.
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#include "config.h"
-+#include "system.h"
-+#include "coretypes.h"
-+#include "tm.h"
-+#include "rtl.h"
-+#include "tree.h"
-+#include "obstack.h"
-+#include "regs.h"
-+#include "hard-reg-set.h"
-+#include "real.h"
-+#include "insn-config.h"
-+#include "conditions.h"
-+#include "output.h"
-+#include "insn-attr.h"
-+#include "flags.h"
-+#include "reload.h"
-+#include "function.h"
-+#include "expr.h"
-+#include "optabs.h"
-+#include "toplev.h"
-+#include "recog.h"
-+#include "ggc.h"
-+#include "except.h"
-+#include "c-pragma.h"
-+#include "integrate.h"
-+#include "tm_p.h"
-+#include "langhooks.h"
-+
-+#include "target.h"
-+#include "target-def.h"
-+
-+#include <ctype.h>
-+
-+/* Forward definitions of types. */
-+typedef struct minipool_node Mnode;
-+typedef struct minipool_fixup Mfix;
-+
-+/* Obstack for minipool constant handling. */
-+static struct obstack minipool_obstack;
-+static char *minipool_startobj;
-+static rtx minipool_vector_label;
-+
-+/* True if we are currently building a constant table. */
-+int making_const_table;
-+
-+/* Some forward function declarations */
-+static unsigned long avr32_isr_value (tree);
-+static unsigned long avr32_compute_func_type (void);
-+static tree avr32_handle_isr_attribute (tree *, tree, tree, int, bool *);
-+static tree avr32_handle_acall_attribute (tree *, tree, tree, int, bool *);
-+static tree avr32_handle_fndecl_attribute (tree * node, tree name, tree args,
-+ int flags, bool * no_add_attrs);
-+static void avr32_reorg (void);
-+bool avr32_return_in_msb (tree type);
-+bool avr32_vector_mode_supported (enum machine_mode mode);
-+static void avr32_init_libfuncs (void);
-+
-+
-+static void
-+avr32_add_gc_roots (void)
-+ {
-+ gcc_obstack_init (&minipool_obstack);
-+ minipool_startobj = (char *) obstack_alloc (&minipool_obstack, 0);
-+ }
-+
-+
-+/* List of all known AVR32 parts */
-+static const struct part_type_s avr32_part_types[] = {
-+ /* name, part_type, architecture type, macro */
-+ {"none", PART_TYPE_AVR32_NONE, ARCH_TYPE_AVR32_AP, "__AVR32__"},
-+ {"ap7000", PART_TYPE_AVR32_AP7000, ARCH_TYPE_AVR32_AP, "__AVR32_AP7000__"},
-+ {"ap7010", PART_TYPE_AVR32_AP7010, ARCH_TYPE_AVR32_AP, "__AVR32_AP7010__"},
-+ {"ap7020", PART_TYPE_AVR32_AP7020, ARCH_TYPE_AVR32_AP, "__AVR32_AP7020__"},
-+ {"uc3a0256", PART_TYPE_AVR32_UC3A0256, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3A0256__"},
-+ {"uc3a0512", PART_TYPE_AVR32_UC3A0512, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3A0512__"},
-+ {"uc3a1128", PART_TYPE_AVR32_UC3A1128, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3A1128__"},
-+ {"uc3a1256", PART_TYPE_AVR32_UC3A1256, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3A1256__"},
-+ {"uc3a1512", PART_TYPE_AVR32_UC3A1512, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3A1512__"},
-+ {"uc3b064", PART_TYPE_AVR32_UC3B064, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B064__"},
-+ {"uc3b0128", PART_TYPE_AVR32_UC3B0128, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B0128__"},
-+ {"uc3b0256", PART_TYPE_AVR32_UC3B0256, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B0256__"},
-+ {"uc3b164", PART_TYPE_AVR32_UC3B164, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B164__"},
-+ {"uc3b1128", PART_TYPE_AVR32_UC3B1128, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B1128__"},
-+ {"uc3b1256", PART_TYPE_AVR32_UC3B1256, ARCH_TYPE_AVR32_UC,
-+ "__AVR32_UC3B1256__"},
-+ {NULL, 0, 0, NULL}
-+};
-+
-+/* List of all known AVR32 architectures */
-+static const struct arch_type_s avr32_arch_types[] = {
-+ /* name, architecture type, microarchitecture type, feature flags, macro */
-+ {"ap", ARCH_TYPE_AVR32_AP, UARCH_TYPE_AVR32B,
-+ (FLAG_AVR32_HAS_DSP
-+ | FLAG_AVR32_HAS_SIMD
-+ | FLAG_AVR32_HAS_UNALIGNED_WORD
-+ | FLAG_AVR32_HAS_CACHES
-+ | FLAG_AVR32_HAS_BRANCH_PRED
-+ | FLAG_AVR32_HAS_RETURN_STACK),
-+ "__AVR32_AP__"},
-+ {"uc", ARCH_TYPE_AVR32_UC, UARCH_TYPE_AVR32A,
-+ (FLAG_AVR32_HAS_DSP | FLAG_AVR32_HAS_RMW),
-+ "__AVR32_UC__"},
-+ {NULL, 0, 0, 0, NULL}
-+};
-+
-+/* Default arch name */
-+const char *avr32_arch_name = "ap";
-+const char *avr32_part_name = "none";
-+
-+const struct part_type_s *avr32_part;
-+const struct arch_type_s *avr32_arch;
-+
-+/* Set default target_flags. */
-+#undef TARGET_DEFAULT_TARGET_FLAGS
-+#define TARGET_DEFAULT_TARGET_FLAGS \
-+ (MASK_HAS_ASM_ADDR_PSEUDOS | MASK_MD_REORG_OPTIMIZATION)
-+
-+void
-+avr32_optimization_options (int level,
-+ int size){
-+ if (AVR32_ALWAYS_PIC)
-+ flag_pic = 1;
-+
-+ /* Enable section anchors if optimization is enabled. */
-+ if (level > 0 || size)
-+ flag_section_anchors = 1;
-+}
-+
-+/* Override command line options */
-+void
-+avr32_override_options (void)
-+ {
-+ const struct part_type_s *part;
-+ const struct arch_type_s *arch;
-+
-+ /* Check if part type is set. */
-+ for (part = avr32_part_types; part->name; part++)
-+ if (strcmp (part->name, avr32_part_name) == 0)
-+ break;
-+
-+ avr32_part = part;
-+
-+ if (!part->name)
-+ {
-+ fprintf (stderr, "Unknown part `%s' specified\nKnown part names:\n",
-+ avr32_part_name);
-+ for (part = avr32_part_types; part->name; part++)
-+ fprintf (stderr, "\t%s\n", part->name);
-+ avr32_part = &avr32_part_types[PART_TYPE_AVR32_NONE];
-+ }
-+
-+ avr32_arch = &avr32_arch_types[avr32_part->arch_type];
-+
-+ /* If part was set to "none" then check if arch was set. */
-+ if (strcmp (avr32_part->name, "none") == 0)
-+ {
-+ /* Check if arch type is set. */
-+ for (arch = avr32_arch_types; arch->name; arch++)
-+ if (strcmp (arch->name, avr32_arch_name) == 0)
-+ break;
-+
-+ avr32_arch = arch;
-+
-+ if (!arch->name)
-+ {
-+ fprintf (stderr, "Unknown arch `%s' specified\nKnown arch names:\n",
-+ avr32_arch_name);
-+ for (arch = avr32_arch_types; arch->name; arch++)
-+ fprintf (stderr, "\t%s\n", arch->name);
-+ avr32_arch = &avr32_arch_types[ARCH_TYPE_AVR32_AP];
-+ }
-+ }
-+
-+ /* If optimization level is two or greater, then align start of loops to a
-+ word boundary since this will allow folding the first insn of the loop.
-+ Do this only for targets supporting branch prediction. */
-+ if (optimize >= 2 && TARGET_BRANCH_PRED)
-+ align_loops = 2;
-+
-+
-+ /* Enable section anchors if optimization is enabled. */
-+ if (optimize > 0 || optimize_size)
-+ flag_section_anchors = 1;
-+
-+ /* Enable fast-float library if unsafe math optimizations
-+ are used. */
-+ if (flag_unsafe_math_optimizations)
-+ target_flags |= MASK_FAST_FLOAT;
-+
-+ /* Check if we should set avr32_imm_in_const_pool
-+ based on if caches are present or not. */
-+ if ( avr32_imm_in_const_pool == -1 )
-+ {
-+ if ( TARGET_CACHES )
-+ avr32_imm_in_const_pool = 1;
-+ else
-+ avr32_imm_in_const_pool = 0;
-+ }
-+
-+ avr32_add_gc_roots ();
-+ }
-+
-+
-+/*
-+If defined, a function that outputs the assembler code for entry to a
-+function. The prologue is responsible for setting up the stack frame,
-+initializing the frame pointer register, saving registers that must be
-+saved, and allocating size additional bytes of storage for the
-+local variables. size is an integer. file is a stdio
-+stream to which the assembler code should be output.
-+
-+The label for the beginning of the function need not be output by this
-+macro. That has already been done when the macro is run.
-+
-+To determine which registers to save, the macro can refer to the array
-+regs_ever_live: element r is nonzero if hard register
-+r is used anywhere within the function. This implies the function
-+prologue should save register r, provided it is not one of the
-+call-used registers. (TARGET_ASM_FUNCTION_EPILOGUE must likewise use
-+regs_ever_live.)
-+
-+On machines that have ``register windows'', the function entry code does
-+not save on the stack the registers that are in the windows, even if
-+they are supposed to be preserved by function calls; instead it takes
-+appropriate steps to ``push'' the register stack, if any non-call-used
-+registers are used in the function.
-+
-+On machines where functions may or may not have frame-pointers, the
-+function entry code must vary accordingly; it must set up the frame
-+pointer if one is wanted, and not otherwise. To determine whether a
-+frame pointer is in wanted, the macro can refer to the variable
-+frame_pointer_needed. The variable's value will be 1 at run
-+time in a function that needs a frame pointer. (see Elimination).
-+
-+The function entry code is responsible for allocating any stack space
-+required for the function. This stack space consists of the regions
-+listed below. In most cases, these regions are allocated in the
-+order listed, with the last listed region closest to the top of the
-+stack (the lowest address if STACK_GROWS_DOWNWARD is defined, and
-+the highest address if it is not defined). You can use a different order
-+for a machine if doing so is more convenient or required for
-+compatibility reasons. Except in cases where required by standard
-+or by a debugger, there is no reason why the stack layout used by GCC
-+need agree with that used by other compilers for a machine.
-+ */
-+
-+#undef TARGET_ASM_FUNCTION_PROLOGUE
-+#define TARGET_ASM_FUNCTION_PROLOGUE avr32_target_asm_function_prologue
-+
-+
-+#undef TARGET_DEFAULT_SHORT_ENUMS
-+#define TARGET_DEFAULT_SHORT_ENUMS hook_bool_void_false
-+
-+#undef TARGET_PROMOTE_FUNCTION_ARGS
-+#define TARGET_PROMOTE_FUNCTION_ARGS hook_bool_tree_true
-+
-+#undef TARGET_PROMOTE_FUNCTION_RETURN
-+#define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_tree_true
-+
-+#undef TARGET_PROMOTE_PROTOTYPES
-+#define TARGET_PROMOTE_PROTOTYPES hook_bool_tree_true
-+
-+#undef TARGET_MUST_PASS_IN_STACK
-+#define TARGET_MUST_PASS_IN_STACK avr32_must_pass_in_stack
-+
-+#undef TARGET_PASS_BY_REFERENCE
-+#define TARGET_PASS_BY_REFERENCE avr32_pass_by_reference
-+
-+#undef TARGET_STRICT_ARGUMENT_NAMING
-+#define TARGET_STRICT_ARGUMENT_NAMING avr32_strict_argument_naming
-+
-+#undef TARGET_VECTOR_MODE_SUPPORTED_P
-+#define TARGET_VECTOR_MODE_SUPPORTED_P avr32_vector_mode_supported
-+
-+#undef TARGET_RETURN_IN_MEMORY
-+#define TARGET_RETURN_IN_MEMORY avr32_return_in_memory
-+
-+#undef TARGET_RETURN_IN_MSB
-+#define TARGET_RETURN_IN_MSB avr32_return_in_msb
-+
-+#undef TARGET_ARG_PARTIAL_BYTES
-+#define TARGET_ARG_PARTIAL_BYTES avr32_arg_partial_bytes
-+
-+#undef TARGET_STRIP_NAME_ENCODING
-+#define TARGET_STRIP_NAME_ENCODING avr32_strip_name_encoding
-+
-+#define streq(string1, string2) (strcmp (string1, string2) == 0)
-+
-+#undef TARGET_NARROW_VOLATILE_BITFIELD
-+#define TARGET_NARROW_VOLATILE_BITFIELD hook_bool_void_false
-+
-+#undef TARGET_ATTRIBUTE_TABLE
-+#define TARGET_ATTRIBUTE_TABLE avr32_attribute_table
-+
-+#undef TARGET_COMP_TYPE_ATTRIBUTES
-+#define TARGET_COMP_TYPE_ATTRIBUTES avr32_comp_type_attributes
-+
-+
-+#undef TARGET_RTX_COSTS
-+#define TARGET_RTX_COSTS avr32_rtx_costs
-+
-+#undef TARGET_CANNOT_FORCE_CONST_MEM
-+#define TARGET_CANNOT_FORCE_CONST_MEM avr32_cannot_force_const_mem
-+
-+#undef TARGET_ASM_INTEGER
-+#define TARGET_ASM_INTEGER avr32_assemble_integer
-+
-+#undef TARGET_FUNCTION_VALUE
-+#define TARGET_FUNCTION_VALUE avr32_function_value
-+
-+#undef TARGET_MIN_ANCHOR_OFFSET
-+#define TARGET_MIN_ANCHOR_OFFSET (0)
-+
-+#undef TARGET_MAX_ANCHOR_OFFSET
-+#define TARGET_MAX_ANCHOR_OFFSET ((1 << 15) - 1)
-+
-+
-+/*
-+ * Switches to the appropriate section for output of constant pool
-+ * entry x in mode. You can assume that x is some kind of constant in
-+ * RTL. The argument mode is redundant except in the case of a
-+ * const_int rtx. Select the section by calling readonly_data_ section
-+ * or one of the alternatives for other sections. align is the
-+ * constant alignment in bits.
-+ *
-+ * The default version of this function takes care of putting symbolic
-+ * constants in flag_ pic mode in data_section and everything else in
-+ * readonly_data_section.
-+ */
-+//#undef TARGET_ASM_SELECT_RTX_SECTION
-+//#define TARGET_ASM_SELECT_RTX_SECTION avr32_select_rtx_section
-+
-+
-+/*
-+ * If non-null, this hook performs a target-specific pass over the
-+ * instruction stream. The compiler will run it at all optimization
-+ * levels, just before the point at which it normally does
-+ * delayed-branch scheduling.
-+ *
-+ * The exact purpose of the hook varies from target to target. Some
-+ * use it to do transformations that are necessary for correctness,
-+ * such as laying out in-function constant pools or avoiding hardware
-+ * hazards. Others use it as an opportunity to do some
-+ * machine-dependent optimizations.
-+ *
-+ * You need not implement the hook if it has nothing to do. The
-+ * default definition is null.
-+ */
-+#undef TARGET_MACHINE_DEPENDENT_REORG
-+#define TARGET_MACHINE_DEPENDENT_REORG avr32_reorg
-+
-+/* Target hook for assembling integer objects.
-+ Need to handle integer vectors */
-+static bool
-+avr32_assemble_integer (rtx x, unsigned int size, int aligned_p)
-+ {
-+ if (avr32_vector_mode_supported (GET_MODE (x)))
-+ {
-+ int i, units;
-+
-+ if (GET_CODE (x) != CONST_VECTOR)
-+ abort ();
-+
-+ units = CONST_VECTOR_NUNITS (x);
-+
-+ switch (GET_MODE (x))
-+ {
-+ case V2HImode:
-+ size = 2;
-+ break;
-+ case V4QImode:
-+ size = 1;
-+ break;
-+ default:
-+ abort ();
-+ }
-+
-+ for (i = 0; i < units; i++)
-+ {
-+ rtx elt;
-+
-+ elt = CONST_VECTOR_ELT (x, i);
-+ assemble_integer (elt, size, i == 0 ? 32 : size * BITS_PER_UNIT, 1);
-+ }
-+
-+ return true;
-+ }
-+
-+ return default_assemble_integer (x, size, aligned_p);
-+ }
-+
-+/*
-+ * This target hook describes the relative costs of RTL expressions.
-+ *
-+ * The cost may depend on the precise form of the expression, which is
-+ * available for examination in x, and the rtx code of the expression
-+ * in which it is contained, found in outer_code. code is the
-+ * expression code--redundant, since it can be obtained with GET_CODE
-+ * (x).
-+ *
-+ * In implementing this hook, you can use the construct COSTS_N_INSNS
-+ * (n) to specify a cost equal to n fast instructions.
-+ *
-+ * On entry to the hook, *total contains a default estimate for the
-+ * cost of the expression. The hook should modify this value as
-+ * necessary. Traditionally, the default costs are COSTS_N_INSNS (5)
-+ * for multiplications, COSTS_N_INSNS (7) for division and modulus
-+ * operations, and COSTS_N_INSNS (1) for all other operations.
-+ *
-+ * When optimizing for code size, i.e. when optimize_size is non-zero,
-+ * this target hook should be used to estimate the relative size cost
-+ * of an expression, again relative to COSTS_N_INSNS.
-+ *
-+ * The hook returns true when all subexpressions of x have been
-+ * processed, and false when rtx_cost should recurse.
-+ */
-+
-+/* Worker routine for avr32_rtx_costs. */
-+static inline int
-+avr32_rtx_costs_1 (rtx x, enum rtx_code code ATTRIBUTE_UNUSED,
-+ enum rtx_code outer ATTRIBUTE_UNUSED)
-+ {
-+ enum machine_mode mode = GET_MODE (x);
-+
-+ switch (GET_CODE (x))
-+ {
-+ case MEM:
-+ /* Using pre decrement / post increment memory operations on the
-+ avr32_uc architecture means that two writebacks must be performed
-+ and hence two cycles are needed. */
-+ if (!optimize_size
-+ && GET_MODE_SIZE (mode) <= 2 * UNITS_PER_WORD
-+ && avr32_arch->arch_type == ARCH_TYPE_AVR32_UC
-+ && (GET_CODE (XEXP (x, 0)) == PRE_DEC
-+ || GET_CODE (XEXP (x, 0)) == POST_INC))
-+ return COSTS_N_INSNS (5);
-+
-+ /* Memory costs quite a lot for the first word, but subsequent words
-+ load at the equivalent of a single insn each. */
-+ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD)
-+ return COSTS_N_INSNS (3 + (GET_MODE_SIZE (mode) / UNITS_PER_WORD));
-+
-+ return COSTS_N_INSNS (4);
-+ case SYMBOL_REF:
-+ case CONST:
-+ /* These are valid for the pseudo insns: lda.w and call which operates
-+ on direct addresses. We assume that the cost of a lda.w is the same
-+ as the cost of a ld.w insn. */
-+ return (outer == SET) ? COSTS_N_INSNS (4) : COSTS_N_INSNS (1);
-+ case DIV:
-+ case MOD:
-+ case UDIV:
-+ case UMOD:
-+ return optimize_size ? COSTS_N_INSNS (1) : COSTS_N_INSNS (16);
-+
-+ case ROTATE:
-+ case ROTATERT:
-+ if (mode == TImode)
-+ return COSTS_N_INSNS (100);
-+
-+ if (mode == DImode)
-+ return COSTS_N_INSNS (10);
-+ return COSTS_N_INSNS (4);
-+ case ASHIFT:
-+ case LSHIFTRT:
-+ case ASHIFTRT:
-+ case NOT:
-+ if (mode == TImode)
-+ return COSTS_N_INSNS (10);
-+
-+ if (mode == DImode)
-+ return COSTS_N_INSNS (4);
-+ return COSTS_N_INSNS (1);
-+ case PLUS:
-+ case MINUS:
-+ case NEG:
-+ case COMPARE:
-+ case ABS:
-+ if (GET_MODE_CLASS (mode) == MODE_FLOAT)
-+ return COSTS_N_INSNS (100);
-+
-+ if (mode == TImode)
-+ return COSTS_N_INSNS (50);
-+
-+ if (mode == DImode)
-+ return COSTS_N_INSNS (2);
-+ return COSTS_N_INSNS (1);
-+
-+ case MULT:
-+ {
-+ if (GET_MODE_CLASS (mode) == MODE_FLOAT)
-+ return COSTS_N_INSNS (300);
-+
-+ if (mode == TImode)
-+ return COSTS_N_INSNS (16);
-+
-+ if (mode == DImode)
-+ return COSTS_N_INSNS (4);
-+
-+ if (mode == HImode)
-+ return COSTS_N_INSNS (2);
-+
-+ return COSTS_N_INSNS (3);
-+ }
-+ case IF_THEN_ELSE:
-+ if (GET_CODE (XEXP (x, 1)) == PC || GET_CODE (XEXP (x, 2)) == PC)
-+ return COSTS_N_INSNS (4);
-+ return COSTS_N_INSNS (1);
-+ case SIGN_EXTEND:
-+ case ZERO_EXTEND:
-+ /* Sign/Zero extensions of registers cost quite much since these
-+ instrcutions only take one register operand which means that gcc
-+ often must insert some move instrcutions */
-+ if (mode == QImode || mode == HImode)
-+ return (COSTS_N_INSNS (GET_CODE (XEXP (x, 0)) == MEM ? 0 : 1));
-+ return COSTS_N_INSNS (4);
-+ case UNSPEC:
-+ /* divmod operations */
-+ if (XINT (x, 1) == UNSPEC_UDIVMODSI4_INTERNAL
-+ || XINT (x, 1) == UNSPEC_DIVMODSI4_INTERNAL)
-+ {
-+ return optimize_size ? COSTS_N_INSNS (1) : COSTS_N_INSNS (16);
-+ }
-+ /* Fallthrough */
-+ default:
-+ return COSTS_N_INSNS (1);
-+ }
-+ }
-+
-+static bool
-+avr32_rtx_costs (rtx x, int code, int outer_code, int *total)
-+ {
-+ *total = avr32_rtx_costs_1 (x, code, outer_code);
-+ return true;
-+ }
-+
-+
-+bool
-+avr32_cannot_force_const_mem (rtx x ATTRIBUTE_UNUSED)
-+ {
-+ /* Do not want symbols in the constant pool when compiling pic or if using
-+ address pseudo instructions. */
-+ return ((flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS)
-+ && avr32_find_symbol (x) != NULL_RTX);
-+ }
-+
-+
-+/* Table of machine attributes. */
-+const struct attribute_spec avr32_attribute_table[] = {
-+ /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */
-+ /* Interrupt Service Routines have special prologue and epilogue
-+ requirements. */
-+ {"isr", 0, 1, false, false, false, avr32_handle_isr_attribute},
-+ {"interrupt", 0, 1, false, false, false, avr32_handle_isr_attribute},
-+ {"acall", 0, 1, false, true, true, avr32_handle_acall_attribute},
-+ {"naked", 0, 0, true, false, false, avr32_handle_fndecl_attribute},
-+ {NULL, 0, 0, false, false, false, NULL}
-+};
-+
-+
-+typedef struct
-+{
-+ const char *const arg;
-+ const unsigned long return_value;
-+}
-+isr_attribute_arg;
-+
-+static const isr_attribute_arg isr_attribute_args[] = {
-+ {"FULL", AVR32_FT_ISR_FULL},
-+ {"full", AVR32_FT_ISR_FULL},
-+ {"HALF", AVR32_FT_ISR_HALF},
-+ {"half", AVR32_FT_ISR_HALF},
-+ {"NONE", AVR32_FT_ISR_NONE},
-+ {"none", AVR32_FT_ISR_NONE},
-+ {"UNDEF", AVR32_FT_ISR_NONE},
-+ {"undef", AVR32_FT_ISR_NONE},
-+ {"SWI", AVR32_FT_ISR_NONE},
-+ {"swi", AVR32_FT_ISR_NONE},
-+ {NULL, AVR32_FT_ISR_NONE}
-+};
-+
-+/* Returns the (interrupt) function type of the current
-+ function, or AVR32_FT_UNKNOWN if the type cannot be determined. */
-+
-+static unsigned long
-+avr32_isr_value (tree argument)
-+ {
-+ const isr_attribute_arg *ptr;
-+ const char *arg;
-+
-+ /* No argument - default to ISR_NONE. */
-+ if (argument == NULL_TREE)
-+ return AVR32_FT_ISR_NONE;
-+
-+ /* Get the value of the argument. */
-+ if (TREE_VALUE (argument) == NULL_TREE
-+ || TREE_CODE (TREE_VALUE (argument)) != STRING_CST)
-+ return AVR32_FT_UNKNOWN;
-+
-+ arg = TREE_STRING_POINTER (TREE_VALUE (argument));
-+
-+ /* Check it against the list of known arguments. */
-+ for (ptr = isr_attribute_args; ptr->arg != NULL; ptr++)
-+ if (streq (arg, ptr->arg))
-+ return ptr->return_value;
-+
-+ /* An unrecognized interrupt type. */
-+ return AVR32_FT_UNKNOWN;
-+ }
-+
-+
-+
-+/*
-+These hooks specify assembly directives for creating certain kinds
-+of integer object. The TARGET_ASM_BYTE_OP directive creates a
-+byte-sized object, the TARGET_ASM_ALIGNED_HI_OP one creates an
-+aligned two-byte object, and so on. Any of the hooks may be
-+NULL, indicating that no suitable directive is available.
-+
-+The compiler will print these strings at the start of a new line,
-+followed immediately by the object's initial value. In most cases,
-+the string should contain a tab, a pseudo-op, and then another tab.
-+ */
-+#undef TARGET_ASM_BYTE_OP
-+#define TARGET_ASM_BYTE_OP "\t.byte\t"
-+#undef TARGET_ASM_ALIGNED_HI_OP
-+#define TARGET_ASM_ALIGNED_HI_OP "\t.align 1\n\t.short\t"
-+#undef TARGET_ASM_ALIGNED_SI_OP
-+#define TARGET_ASM_ALIGNED_SI_OP "\t.align 2\n\t.int\t"
-+#undef TARGET_ASM_ALIGNED_DI_OP
-+#define TARGET_ASM_ALIGNED_DI_OP NULL
-+#undef TARGET_ASM_ALIGNED_TI_OP
-+#define TARGET_ASM_ALIGNED_TI_OP NULL
-+#undef TARGET_ASM_UNALIGNED_HI_OP
-+#define TARGET_ASM_UNALIGNED_HI_OP "\t.short\t"
-+#undef TARGET_ASM_UNALIGNED_SI_OP
-+#define TARGET_ASM_UNALIGNED_SI_OP "\t.int\t"
-+#undef TARGET_ASM_UNALIGNED_DI_OP
-+#define TARGET_ASM_UNALIGNED_DI_OP NULL
-+#undef TARGET_ASM_UNALIGNED_TI_OP
-+#define TARGET_ASM_UNALIGNED_TI_OP NULL
-+
-+#undef TARGET_ASM_OUTPUT_MI_THUNK
-+#define TARGET_ASM_OUTPUT_MI_THUNK avr32_output_mi_thunk
-+
-+#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
-+#define TARGET_ASM_CAN_OUTPUT_MI_THUNK hook_bool_tree_hwi_hwi_tree_true
-+
-+static void
-+avr32_output_mi_thunk (FILE * file,
-+ tree thunk ATTRIBUTE_UNUSED,
-+ HOST_WIDE_INT delta,
-+ HOST_WIDE_INT vcall_offset, tree function)
-+ {
-+ int mi_delta = delta;
-+ int this_regno =
-+ (aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function) ?
-+ INTERNAL_REGNUM (11) : INTERNAL_REGNUM (12));
-+
-+
-+ if (!avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21")
-+ || vcall_offset
-+ || flag_pic)
-+ {
-+ fputs ("\tpushm\tlr\n", file);
-+ }
-+
-+
-+ if (mi_delta != 0)
-+ {
-+ if (avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21"))
-+ {
-+ fprintf (file, "\tsub\t%s, -0x%x\n", reg_names[this_regno],
-+ mi_delta);
-+ }
-+ else
-+ {
-+ /* Immediate is larger than k21 we must make us a temp register by
-+ pushing a register to the stack. */
-+ fprintf (file, "\tmov\tlr, lo(%x)\n", mi_delta);
-+ fprintf (file, "\torh\tlr, hi(%x)\n", mi_delta);
-+ fprintf (file, "\tadd\t%s, lr\n", reg_names[this_regno]);
-+ }
-+ }
-+
-+
-+ if (vcall_offset != 0)
-+ {
-+ fprintf (file, "\tld.w\tlr, %s[0]\n", reg_names[this_regno]);
-+ fprintf (file, "\tld.w\tlr, lr[%i]\n", (int) vcall_offset);
-+ fprintf (file, "\tadd\t%s, lr\n", reg_names[this_regno]);
-+ }
-+
-+
-+ if ( (!avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21")
-+ || vcall_offset)
-+ && !flag_pic )
-+ {
-+ fputs ("\tpopm\tlr\n", file);
-+ }
-+
-+ if (flag_pic)
-+ {
-+ /* Load the got into lr and then load the pointer
-+ to the function from the got and put it on the stack.
-+ We can then call the function and restore lr by issuing
-+ a doubleword load from the stack. We do not use a popm/ldm
-+ since it will be treated as a return and might need a flushing
-+ of the return-stack if available. */
-+ rtx label = gen_label_rtx ();
-+ /* Load the got. */
-+ fputs ("\tlddpc\tlr, 0f\n", file);
-+ (*targetm.asm_out.internal_label) (file, "L",
-+ CODE_LABEL_NUMBER (label));
-+ fputs ("\trsub\tlr, pc\n", file);
-+ /* Load the function pointer. */
-+ fputs ("\tld.w\tlr, lr[", file);
-+ assemble_name (file, XSTR (XEXP (DECL_RTL (function), 0), 0));
-+ fputs ("@got]\n", file);
-+ /* Push the function pointer on the stack.*/
-+ fputs ("\tpushm\tlr\n", file);
-+ /* Restore the old lr value and load the function pointer into
-+ pc. */
-+ fputs ("\tld.d\tlr,sp++\n", file);
-+ fprintf (file, "\t.align 2\n");
-+ fprintf (file, "0:\t.long\t.L%d - _GLOBAL_OFFSET_TABLE_\n", CODE_LABEL_NUMBER (label));
-+ }
-+ else
-+ {
-+ fprintf (file, "\tlddpc\tpc, 0f\n");
-+ fprintf (file, "\t.align 2\n");
-+ fputs ("0:\t.long\t", file);
-+ assemble_name (file, XSTR (XEXP (DECL_RTL (function), 0), 0));
-+ fputc ('\n', file);
-+ }
-+ }
-+
-+/* Implements target hook vector_mode_supported. */
-+bool
-+avr32_vector_mode_supported (enum machine_mode mode)
-+ {
-+ if ((mode == V2HImode) || (mode == V4QImode))
-+ return true;
-+
-+ return false;
-+ }
-+
-+
-+#undef TARGET_INIT_LIBFUNCS
-+#define TARGET_INIT_LIBFUNCS avr32_init_libfuncs
-+
-+#undef TARGET_INIT_BUILTINS
-+#define TARGET_INIT_BUILTINS avr32_init_builtins
-+
-+#undef TARGET_EXPAND_BUILTIN
-+#define TARGET_EXPAND_BUILTIN avr32_expand_builtin
-+
-+tree int_ftype_int, int_ftype_void, short_ftype_short, void_ftype_int_int,
-+void_ftype_ptr_int;
-+tree void_ftype_int, void_ftype_void, int_ftype_ptr_int;
-+tree short_ftype_short, int_ftype_int_short, int_ftype_short_short,
-+short_ftype_short_short;
-+tree int_ftype_int_int, longlong_ftype_int_short, longlong_ftype_short_short;
-+tree void_ftype_int_int_int_int_int, void_ftype_int_int_int;
-+tree longlong_ftype_int_int, void_ftype_int_int_longlong;
-+tree int_ftype_int_int_int, longlong_ftype_longlong_int_short;
-+tree longlong_ftype_longlong_short_short, int_ftype_int_short_short;
-+
-+#define def_builtin(NAME, TYPE, CODE) \
-+ lang_hooks.builtin_function ((NAME), (TYPE), (CODE), \
-+ BUILT_IN_MD, NULL, NULL_TREE)
-+
-+#define def_mbuiltin(MASK, NAME, TYPE, CODE) \
-+ do \
-+ { \
-+ if ((MASK)) \
-+ lang_hooks.builtin_function ((NAME), (TYPE), (CODE), \
-+ BUILT_IN_MD, NULL, NULL_TREE); \
-+ } \
-+ while (0)
-+
-+struct builtin_description
-+{
-+ const unsigned int mask;
-+ const enum insn_code icode;
-+ const char *const name;
-+ const int code;
-+ const enum rtx_code comparison;
-+ const unsigned int flag;
-+ const tree *ftype;
-+};
-+
-+static const struct builtin_description bdesc_2arg[] = {
-+#define DSP_BUILTIN(code, builtin, ftype) \
-+ { 1, CODE_FOR_##code, "__builtin_" #code , \
-+ AVR32_BUILTIN_##builtin, 0, 0, ftype }
-+
-+ DSP_BUILTIN (mulsathh_h, MULSATHH_H, &short_ftype_short_short),
-+ DSP_BUILTIN (mulsathh_w, MULSATHH_W, &int_ftype_short_short),
-+ DSP_BUILTIN (mulsatrndhh_h, MULSATRNDHH_H, &short_ftype_short_short),
-+ DSP_BUILTIN (mulsatrndwh_w, MULSATRNDWH_W, &int_ftype_int_short),
-+ DSP_BUILTIN (mulsatwh_w, MULSATWH_W, &int_ftype_int_short),
-+ DSP_BUILTIN (satadd_h, SATADD_H, &short_ftype_short_short),
-+ DSP_BUILTIN (satsub_h, SATSUB_H, &short_ftype_short_short),
-+ DSP_BUILTIN (satadd_w, SATADD_W, &int_ftype_int_int),
-+ DSP_BUILTIN (satsub_w, SATSUB_W, &int_ftype_int_int),
-+ DSP_BUILTIN (mulwh_d, MULWH_D, &longlong_ftype_int_short),
-+ DSP_BUILTIN (mulnwh_d, MULNWH_D, &longlong_ftype_int_short)
-+};
-+
-+
-+void
-+avr32_init_builtins (void)
-+ {
-+ unsigned int i;
-+ const struct builtin_description *d;
-+ tree endlink = void_list_node;
-+ tree int_endlink = tree_cons (NULL_TREE, integer_type_node, endlink);
-+ tree longlong_endlink =
-+ tree_cons (NULL_TREE, long_long_integer_type_node, endlink);
-+ tree short_endlink =
-+ tree_cons (NULL_TREE, short_integer_type_node, endlink);
-+ tree void_endlink = tree_cons (NULL_TREE, void_type_node, endlink);
-+
-+ /* int func (int) */
-+ int_ftype_int = build_function_type (integer_type_node, int_endlink);
-+
-+ /* short func (short) */
-+ short_ftype_short
-+ = build_function_type (short_integer_type_node, short_endlink);
-+
-+ /* short func (short, short) */
-+ short_ftype_short_short
-+ = build_function_type (short_integer_type_node,
-+ tree_cons (NULL_TREE, short_integer_type_node,
-+ short_endlink));
-+
-+ /* long long func (long long, short, short) */
-+ longlong_ftype_longlong_short_short
-+ = build_function_type (long_long_integer_type_node,
-+ tree_cons (NULL_TREE, long_long_integer_type_node,
-+ tree_cons (NULL_TREE,
-+ short_integer_type_node,
-+ short_endlink)));
-+
-+ /* long long func (short, short) */
-+ longlong_ftype_short_short
-+ = build_function_type (long_long_integer_type_node,
-+ tree_cons (NULL_TREE, short_integer_type_node,
-+ short_endlink));
-+
-+ /* int func (int, int) */
-+ int_ftype_int_int
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ int_endlink));
-+
-+ /* long long func (int, int) */
-+ longlong_ftype_int_int
-+ = build_function_type (long_long_integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ int_endlink));
-+
-+ /* long long int func (long long, int, short) */
-+ longlong_ftype_longlong_int_short
-+ = build_function_type (long_long_integer_type_node,
-+ tree_cons (NULL_TREE, long_long_integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ short_endlink)));
-+
-+ /* long long int func (int, short) */
-+ longlong_ftype_int_short
-+ = build_function_type (long_long_integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ short_endlink));
-+
-+ /* int func (int, short, short) */
-+ int_ftype_int_short_short
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE,
-+ short_integer_type_node,
-+ short_endlink)));
-+
-+ /* int func (short, short) */
-+ int_ftype_short_short
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, short_integer_type_node,
-+ short_endlink));
-+
-+ /* int func (int, short) */
-+ int_ftype_int_short
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ short_endlink));
-+
-+ /* void func (int, int) */
-+ void_ftype_int_int
-+ = build_function_type (void_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ int_endlink));
-+
-+ /* void func (int, int, int) */
-+ void_ftype_int_int_int
-+ = build_function_type (void_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ int_endlink)));
-+
-+ /* void func (int, int, long long) */
-+ void_ftype_int_int_longlong
-+ = build_function_type (void_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ longlong_endlink)));
-+
-+ /* void func (int, int, int, int, int) */
-+ void_ftype_int_int_int_int_int
-+ = build_function_type (void_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE,
-+ integer_type_node,
-+ tree_cons
-+ (NULL_TREE,
-+ integer_type_node,
-+ int_endlink)))));
-+
-+ /* void func (void *, int) */
-+ void_ftype_ptr_int
-+ = build_function_type (void_type_node,
-+ tree_cons (NULL_TREE, ptr_type_node, int_endlink));
-+
-+ /* void func (int) */
-+ void_ftype_int = build_function_type (void_type_node, int_endlink);
-+
-+ /* void func (void) */
-+ void_ftype_void = build_function_type (void_type_node, void_endlink);
-+
-+ /* int func (void) */
-+ int_ftype_void = build_function_type (integer_type_node, void_endlink);
-+
-+ /* int func (void *, int) */
-+ int_ftype_ptr_int
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, ptr_type_node, int_endlink));
-+
-+ /* int func (int, int, int) */
-+ int_ftype_int_int_int
-+ = build_function_type (integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ tree_cons (NULL_TREE, integer_type_node,
-+ int_endlink)));
-+
-+ /* Initialize avr32 builtins. */
-+ def_builtin ("__builtin_mfsr", int_ftype_int, AVR32_BUILTIN_MFSR);
-+ def_builtin ("__builtin_mtsr", void_ftype_int_int, AVR32_BUILTIN_MTSR);
-+ def_builtin ("__builtin_mfdr", int_ftype_int, AVR32_BUILTIN_MFDR);
-+ def_builtin ("__builtin_mtdr", void_ftype_int_int, AVR32_BUILTIN_MTDR);
-+ def_builtin ("__builtin_cache", void_ftype_ptr_int, AVR32_BUILTIN_CACHE);
-+ def_builtin ("__builtin_sync", void_ftype_int, AVR32_BUILTIN_SYNC);
-+ def_builtin ("__builtin_tlbr", void_ftype_void, AVR32_BUILTIN_TLBR);
-+ def_builtin ("__builtin_tlbs", void_ftype_void, AVR32_BUILTIN_TLBS);
-+ def_builtin ("__builtin_tlbw", void_ftype_void, AVR32_BUILTIN_TLBW);
-+ def_builtin ("__builtin_breakpoint", void_ftype_void,
-+ AVR32_BUILTIN_BREAKPOINT);
-+ def_builtin ("__builtin_xchg", int_ftype_ptr_int, AVR32_BUILTIN_XCHG);
-+ def_builtin ("__builtin_ldxi", int_ftype_ptr_int, AVR32_BUILTIN_LDXI);
-+ def_builtin ("__builtin_bswap_16", short_ftype_short,
-+ AVR32_BUILTIN_BSWAP16);
-+ def_builtin ("__builtin_bswap_32", int_ftype_int, AVR32_BUILTIN_BSWAP32);
-+ def_builtin ("__builtin_cop", void_ftype_int_int_int_int_int,
-+ AVR32_BUILTIN_COP);
-+ def_builtin ("__builtin_mvcr_w", int_ftype_int_int, AVR32_BUILTIN_MVCR_W);
-+ def_builtin ("__builtin_mvrc_w", void_ftype_int_int_int,
-+ AVR32_BUILTIN_MVRC_W);
-+ def_builtin ("__builtin_mvcr_d", longlong_ftype_int_int,
-+ AVR32_BUILTIN_MVCR_D);
-+ def_builtin ("__builtin_mvrc_d", void_ftype_int_int_longlong,
-+ AVR32_BUILTIN_MVRC_D);
-+ def_builtin ("__builtin_sats", int_ftype_int_int_int, AVR32_BUILTIN_SATS);
-+ def_builtin ("__builtin_satu", int_ftype_int_int_int, AVR32_BUILTIN_SATU);
-+ def_builtin ("__builtin_satrnds", int_ftype_int_int_int,
-+ AVR32_BUILTIN_SATRNDS);
-+ def_builtin ("__builtin_satrndu", int_ftype_int_int_int,
-+ AVR32_BUILTIN_SATRNDU);
-+ def_builtin ("__builtin_musfr", void_ftype_int, AVR32_BUILTIN_MUSFR);
-+ def_builtin ("__builtin_mustr", int_ftype_void, AVR32_BUILTIN_MUSTR);
-+ def_builtin ("__builtin_macsathh_w", int_ftype_int_short_short,
-+ AVR32_BUILTIN_MACSATHH_W);
-+ def_builtin ("__builtin_macwh_d", longlong_ftype_longlong_int_short,
-+ AVR32_BUILTIN_MACWH_D);
-+ def_builtin ("__builtin_machh_d", longlong_ftype_longlong_short_short,
-+ AVR32_BUILTIN_MACHH_D);
-+
-+ /* Add all builtins that are more or less simple operations on two
-+ operands. */
-+ for (i = 0, d = bdesc_2arg; i < ARRAY_SIZE (bdesc_2arg); i++, d++)
-+ {
-+ /* Use one of the operands; the target can have a different mode for
-+ mask-generating compares. */
-+
-+ if (d->name == 0)
-+ continue;
-+
-+ def_mbuiltin (d->mask, d->name, *(d->ftype), d->code);
-+ }
-+ }
-+
-+
-+/* Subroutine of avr32_expand_builtin to take care of binop insns. */
-+
-+static rtx
-+avr32_expand_binop_builtin (enum insn_code icode, tree arglist, rtx target)
-+ {
-+ rtx pat;
-+ tree arg0 = TREE_VALUE (arglist);
-+ tree arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ rtx op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ rtx op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ enum machine_mode tmode = insn_data[icode].operand[0].mode;
-+ enum machine_mode mode0 = insn_data[icode].operand[1].mode;
-+ enum machine_mode mode1 = insn_data[icode].operand[2].mode;
-+
-+ if (!target
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+
-+ /* In case the insn wants input operands in modes different from the
-+ result, abort. */
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ /* If op0 is already a reg we must cast it to the correct mode. */
-+ if (REG_P (op0))
-+ op0 = convert_to_mode (mode0, op0, 1);
-+ else
-+ op0 = copy_to_mode_reg (mode0, op0);
-+ }
-+ if (!(*insn_data[icode].operand[2].predicate) (op1, mode1))
-+ {
-+ /* If op1 is already a reg we must cast it to the correct mode. */
-+ if (REG_P (op1))
-+ op1 = convert_to_mode (mode1, op1, 1);
-+ else
-+ op1 = copy_to_mode_reg (mode1, op1);
-+ }
-+ pat = GEN_FCN (icode) (target, op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ }
-+
-+/* Expand an expression EXP that calls a built-in function,
-+ with result going to TARGET if that's convenient
-+ (and in mode MODE if that's convenient).
-+ SUBTARGET may be used as the target for computing one of EXP's operands.
-+ IGNORE is nonzero if the value is to be ignored. */
-+
-+rtx
-+avr32_expand_builtin (tree exp,
-+ rtx target,
-+ rtx subtarget ATTRIBUTE_UNUSED,
-+ enum machine_mode mode ATTRIBUTE_UNUSED,
-+ int ignore ATTRIBUTE_UNUSED)
-+ {
-+ const struct builtin_description *d;
-+ unsigned int i;
-+ enum insn_code icode;
-+ tree fndecl = TREE_OPERAND (TREE_OPERAND (exp, 0), 0);
-+ tree arglist = TREE_OPERAND (exp, 1);
-+ tree arg0, arg1, arg2;
-+ rtx op0, op1, op2, pat;
-+ enum machine_mode tmode, mode0, mode1;
-+ enum machine_mode arg0_mode;
-+ int fcode = DECL_FUNCTION_CODE (fndecl);
-+
-+ switch (fcode)
-+ {
-+ default:
-+ break;
-+
-+ case AVR32_BUILTIN_SATS:
-+ case AVR32_BUILTIN_SATU:
-+ case AVR32_BUILTIN_SATRNDS:
-+ case AVR32_BUILTIN_SATRNDU:
-+ {
-+ const char *fname;
-+ switch (fcode)
-+ {
-+ default:
-+ case AVR32_BUILTIN_SATS:
-+ icode = CODE_FOR_sats;
-+ fname = "sats";
-+ break;
-+ case AVR32_BUILTIN_SATU:
-+ icode = CODE_FOR_satu;
-+ fname = "satu";
-+ break;
-+ case AVR32_BUILTIN_SATRNDS:
-+ icode = CODE_FOR_satrnds;
-+ fname = "satrnds";
-+ break;
-+ case AVR32_BUILTIN_SATRNDU:
-+ icode = CODE_FOR_satrndu;
-+ fname = "satrndu";
-+ break;
-+ }
-+
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+ tmode = insn_data[icode].operand[0].mode;
-+
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, GET_MODE (op0)))
-+ {
-+ op0 = copy_to_mode_reg (insn_data[icode].operand[0].mode, op0);
-+ }
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+ {
-+ error ("Parameter 2 to __builtin_%s should be a constant number.",
-+ fname);
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op2, SImode))
-+ {
-+ error ("Parameter 3 to __builtin_%s should be a constant number.",
-+ fname);
-+ return NULL_RTX;
-+ }
-+
-+ emit_move_insn (target, op0);
-+ pat = GEN_FCN (icode) (target, op1, op2);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return target;
-+ }
-+ case AVR32_BUILTIN_MUSTR:
-+ icode = CODE_FOR_mustr;
-+ tmode = insn_data[icode].operand[0].mode;
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+ pat = GEN_FCN (icode) (target);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+
-+ case AVR32_BUILTIN_MFSR:
-+ icode = CODE_FOR_mfsr;
-+ arg0 = TREE_VALUE (arglist);
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ error ("Parameter 1 to __builtin_mfsr must be a constant number");
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+ pat = GEN_FCN (icode) (target, op0);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ case AVR32_BUILTIN_MTSR:
-+ icode = CODE_FOR_mtsr;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ mode0 = insn_data[icode].operand[0].mode;
-+ mode1 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+ {
-+ error ("Parameter 1 to __builtin_mtsr must be a constant number");
-+ return gen_reg_rtx (mode0);
-+ }
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+ op1 = copy_to_mode_reg (mode1, op1);
-+ pat = GEN_FCN (icode) (op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_MFDR:
-+ icode = CODE_FOR_mfdr;
-+ arg0 = TREE_VALUE (arglist);
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ error ("Parameter 1 to __builtin_mfdr must be a constant number");
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+ pat = GEN_FCN (icode) (target, op0);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ case AVR32_BUILTIN_MTDR:
-+ icode = CODE_FOR_mtdr;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ mode0 = insn_data[icode].operand[0].mode;
-+ mode1 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+ {
-+ error ("Parameter 1 to __builtin_mtdr must be a constant number");
-+ return gen_reg_rtx (mode0);
-+ }
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+ op1 = copy_to_mode_reg (mode1, op1);
-+ pat = GEN_FCN (icode) (op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_CACHE:
-+ icode = CODE_FOR_cache;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ mode0 = insn_data[icode].operand[0].mode;
-+ mode1 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+ {
-+ error ("Parameter 2 to __builtin_cache must be a constant number");
-+ return gen_reg_rtx (mode1);
-+ }
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+ op0 = copy_to_mode_reg (mode0, op0);
-+
-+ pat = GEN_FCN (icode) (op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_SYNC:
-+ case AVR32_BUILTIN_MUSFR:
-+ {
-+ const char *fname;
-+ switch (fcode)
-+ {
-+ default:
-+ case AVR32_BUILTIN_SYNC:
-+ icode = CODE_FOR_sync;
-+ fname = "sync";
-+ break;
-+ case AVR32_BUILTIN_MUSFR:
-+ icode = CODE_FOR_musfr;
-+ fname = "musfr";
-+ break;
-+ }
-+
-+ arg0 = TREE_VALUE (arglist);
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ mode0 = insn_data[icode].operand[0].mode;
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+ {
-+ if (icode == CODE_FOR_musfr)
-+ op0 = copy_to_mode_reg (mode0, op0);
-+ else
-+ {
-+ error ("Parameter to __builtin_%s is illegal.", fname);
-+ return gen_reg_rtx (mode0);
-+ }
-+ }
-+ pat = GEN_FCN (icode) (op0);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ }
-+ case AVR32_BUILTIN_TLBR:
-+ icode = CODE_FOR_tlbr;
-+ pat = GEN_FCN (icode) (NULL_RTX);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_TLBS:
-+ icode = CODE_FOR_tlbs;
-+ pat = GEN_FCN (icode) (NULL_RTX);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_TLBW:
-+ icode = CODE_FOR_tlbw;
-+ pat = GEN_FCN (icode) (NULL_RTX);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_BREAKPOINT:
-+ icode = CODE_FOR_breakpoint;
-+ pat = GEN_FCN (icode) (NULL_RTX);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return NULL_RTX;
-+ case AVR32_BUILTIN_XCHG:
-+ icode = CODE_FOR_sync_lock_test_and_setsi;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+ mode1 = insn_data[icode].operand[2].mode;
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op1, mode1))
-+ {
-+ op1 = copy_to_mode_reg (mode1, op1);
-+ }
-+
-+ op0 = gen_rtx_MEM (SImode, op0);
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ error
-+ ("Parameter 1 to __builtin_xchg must be a pointer to an integer.");
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+ pat = GEN_FCN (icode) (target, op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ case AVR32_BUILTIN_LDXI:
-+ icode = CODE_FOR_ldxi;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+ mode1 = insn_data[icode].operand[2].mode;
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ op0 = copy_to_mode_reg (mode0, op0);
-+ }
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op1, mode1))
-+ {
-+ op1 = copy_to_mode_reg (mode1, op1);
-+ }
-+
-+ if (!(*insn_data[icode].operand[3].predicate) (op2, SImode))
-+ {
-+ error
-+ ("Parameter 3 to __builtin_ldxi must be a valid extract shift operand: (0|8|16|24)");
-+ return gen_reg_rtx (mode0);
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+ pat = GEN_FCN (icode) (target, op0, op1, op2);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ case AVR32_BUILTIN_BSWAP16:
-+ {
-+ icode = CODE_FOR_bswap_16;
-+ arg0 = TREE_VALUE (arglist);
-+ arg0_mode = TYPE_MODE (TREE_TYPE (arg0));
-+ mode0 = insn_data[icode].operand[1].mode;
-+ if (arg0_mode != mode0)
-+ arg0 = build1 (NOP_EXPR,
-+ (*lang_hooks.types.type_for_mode) (mode0, 0), arg0);
-+
-+ op0 = expand_expr (arg0, NULL_RTX, HImode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ op0 = copy_to_mode_reg (mode0, op0);
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ {
-+ target = gen_reg_rtx (tmode);
-+ }
-+
-+
-+ pat = GEN_FCN (icode) (target, op0);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return target;
-+ }
-+ case AVR32_BUILTIN_BSWAP32:
-+ {
-+ icode = CODE_FOR_bswap_32;
-+ arg0 = TREE_VALUE (arglist);
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+ {
-+ op0 = copy_to_mode_reg (mode0, op0);
-+ }
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+
-+
-+ pat = GEN_FCN (icode) (target, op0);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return target;
-+ }
-+ case AVR32_BUILTIN_MVCR_W:
-+ case AVR32_BUILTIN_MVCR_D:
-+ {
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+
-+ if (fcode == AVR32_BUILTIN_MVCR_W)
-+ icode = CODE_FOR_mvcrsi;
-+ else
-+ icode = CODE_FOR_mvcrdi;
-+
-+ tmode = insn_data[icode].operand[0].mode;
-+
-+ if (target == 0
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op0, SImode))
-+ {
-+ error
-+ ("Parameter 1 to __builtin_cop is not a valid coprocessor number.");
-+ error ("Number should be between 0 and 7.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op1, SImode))
-+ {
-+ error
-+ ("Parameter 2 to __builtin_cop is not a valid coprocessor register number.");
-+ error ("Number should be between 0 and 15.");
-+ return NULL_RTX;
-+ }
-+
-+ pat = GEN_FCN (icode) (target, op0, op1);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return target;
-+ }
-+ case AVR32_BUILTIN_MACSATHH_W:
-+ case AVR32_BUILTIN_MACWH_D:
-+ case AVR32_BUILTIN_MACHH_D:
-+ {
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+ icode = ((fcode == AVR32_BUILTIN_MACSATHH_W) ? CODE_FOR_macsathh_w :
-+ (fcode == AVR32_BUILTIN_MACWH_D) ? CODE_FOR_macwh_d :
-+ CODE_FOR_machh_d);
-+
-+ tmode = insn_data[icode].operand[0].mode;
-+ mode0 = insn_data[icode].operand[1].mode;
-+ mode1 = insn_data[icode].operand[2].mode;
-+
-+
-+ if (!target
-+ || GET_MODE (target) != tmode
-+ || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+ target = gen_reg_rtx (tmode);
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, tmode))
-+ {
-+ /* If op0 is already a reg we must cast it to the correct mode. */
-+ if (REG_P (op0))
-+ op0 = convert_to_mode (tmode, op0, 1);
-+ else
-+ op0 = copy_to_mode_reg (tmode, op0);
-+ }
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, mode0))
-+ {
-+ /* If op1 is already a reg we must cast it to the correct mode. */
-+ if (REG_P (op1))
-+ op1 = convert_to_mode (mode0, op1, 1);
-+ else
-+ op1 = copy_to_mode_reg (mode0, op1);
-+ }
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op2, mode1))
-+ {
-+ /* If op1 is already a reg we must cast it to the correct mode. */
-+ if (REG_P (op2))
-+ op2 = convert_to_mode (mode1, op2, 1);
-+ else
-+ op2 = copy_to_mode_reg (mode1, op2);
-+ }
-+
-+ emit_move_insn (target, op0);
-+
-+ pat = GEN_FCN (icode) (target, op1, op2);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+ return target;
-+ }
-+ case AVR32_BUILTIN_MVRC_W:
-+ case AVR32_BUILTIN_MVRC_D:
-+ {
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+ if (fcode == AVR32_BUILTIN_MVRC_W)
-+ icode = CODE_FOR_mvrcsi;
-+ else
-+ icode = CODE_FOR_mvrcdi;
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, SImode))
-+ {
-+ error ("Parameter 1 is not a valid coprocessor number.");
-+ error ("Number should be between 0 and 7.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+ {
-+ error ("Parameter 2 is not a valid coprocessor register number.");
-+ error ("Number should be between 0 and 15.");
-+ return NULL_RTX;
-+ }
-+
-+ if (GET_CODE (op2) == CONST_INT
-+ || GET_CODE (op2) == CONST
-+ || GET_CODE (op2) == SYMBOL_REF || GET_CODE (op2) == LABEL_REF)
-+ {
-+ op2 = force_const_mem (insn_data[icode].operand[2].mode, op2);
-+ }
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op2, GET_MODE (op2)))
-+ op2 = copy_to_mode_reg (insn_data[icode].operand[2].mode, op2);
-+
-+
-+ pat = GEN_FCN (icode) (op0, op1, op2);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return NULL_RTX;
-+ }
-+ case AVR32_BUILTIN_COP:
-+ {
-+ rtx op3, op4;
-+ tree arg3, arg4;
-+ icode = CODE_FOR_cop;
-+ arg0 = TREE_VALUE (arglist);
-+ arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+ arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+ arg3 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (arglist))));
-+ arg4 =
-+ TREE_VALUE (TREE_CHAIN
-+ (TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (arglist)))));
-+ op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+ op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+ op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+ op3 = expand_expr (arg3, NULL_RTX, VOIDmode, 0);
-+ op4 = expand_expr (arg4, NULL_RTX, VOIDmode, 0);
-+
-+ if (!(*insn_data[icode].operand[0].predicate) (op0, SImode))
-+ {
-+ error
-+ ("Parameter 1 to __builtin_cop is not a valid coprocessor number.");
-+ error ("Number should be between 0 and 7.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+ {
-+ error
-+ ("Parameter 2 to __builtin_cop is not a valid coprocessor register number.");
-+ error ("Number should be between 0 and 15.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[2].predicate) (op2, SImode))
-+ {
-+ error
-+ ("Parameter 3 to __builtin_cop is not a valid coprocessor register number.");
-+ error ("Number should be between 0 and 15.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[3].predicate) (op3, SImode))
-+ {
-+ error
-+ ("Parameter 4 to __builtin_cop is not a valid coprocessor register number.");
-+ error ("Number should be between 0 and 15.");
-+ return NULL_RTX;
-+ }
-+
-+ if (!(*insn_data[icode].operand[4].predicate) (op4, SImode))
-+ {
-+ error
-+ ("Parameter 5 to __builtin_cop is not a valid coprocessor operation.");
-+ error ("Number should be between 0 and 127.");
-+ return NULL_RTX;
-+ }
-+
-+ pat = GEN_FCN (icode) (op0, op1, op2, op3, op4);
-+ if (!pat)
-+ return 0;
-+ emit_insn (pat);
-+
-+ return target;
-+ }
-+ }
-+
-+ for (i = 0, d = bdesc_2arg; i < ARRAY_SIZE (bdesc_2arg); i++, d++)
-+ if (d->code == fcode)
-+ return avr32_expand_binop_builtin (d->icode, arglist, target);
-+
-+
-+ /* @@@ Should really do something sensible here. */
-+ return NULL_RTX;
-+ }
-+
-+
-+/* Handle an "interrupt" or "isr" attribute;
-+ arguments as in struct attribute_spec.handler. */
-+
-+static tree
-+avr32_handle_isr_attribute (tree * node, tree name, tree args,
-+ int flags, bool * no_add_attrs)
-+ {
-+ if (DECL_P (*node))
-+ {
-+ if (TREE_CODE (*node) != FUNCTION_DECL)
-+ {
-+ warning ("`%s' attribute only applies to functions",
-+ IDENTIFIER_POINTER (name));
-+ *no_add_attrs = true;
-+ }
-+ /* FIXME: the argument if any is checked for type attributes; should it
-+ be checked for decl ones? */
-+ }
-+ else
-+ {
-+ if (TREE_CODE (*node) == FUNCTION_TYPE
-+ || TREE_CODE (*node) == METHOD_TYPE)
-+ {
-+ if (avr32_isr_value (args) == AVR32_FT_UNKNOWN)
-+ {
-+ warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+ *no_add_attrs = true;
-+ }
-+ }
-+ else if (TREE_CODE (*node) == POINTER_TYPE
-+ && (TREE_CODE (TREE_TYPE (*node)) == FUNCTION_TYPE
-+ || TREE_CODE (TREE_TYPE (*node)) == METHOD_TYPE)
-+ && avr32_isr_value (args) != AVR32_FT_UNKNOWN)
-+ {
-+ *node = build_variant_type_copy (*node);
-+ TREE_TYPE (*node) = build_type_attribute_variant
-+ (TREE_TYPE (*node),
-+ tree_cons (name, args, TYPE_ATTRIBUTES (TREE_TYPE (*node))));
-+ *no_add_attrs = true;
-+ }
-+ else
-+ {
-+ /* Possibly pass this attribute on from the type to a decl. */
-+ if (flags & ((int) ATTR_FLAG_DECL_NEXT
-+ | (int) ATTR_FLAG_FUNCTION_NEXT
-+ | (int) ATTR_FLAG_ARRAY_NEXT))
-+ {
-+ *no_add_attrs = true;
-+ return tree_cons (name, args, NULL_TREE);
-+ }
-+ else
-+ {
-+ warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+ }
-+ }
-+ }
-+
-+ return NULL_TREE;
-+ }
-+
-+/* Handle an attribute requiring a FUNCTION_DECL;
-+ arguments as in struct attribute_spec.handler. */
-+static tree
-+avr32_handle_fndecl_attribute (tree * node, tree name,
-+ tree args ATTRIBUTE_UNUSED,
-+ int flags ATTRIBUTE_UNUSED,
-+ bool * no_add_attrs)
-+ {
-+ if (TREE_CODE (*node) != FUNCTION_DECL)
-+ {
-+ warning ("%qs attribute only applies to functions",
-+ IDENTIFIER_POINTER (name));
-+ *no_add_attrs = true;
-+ }
-+
-+ return NULL_TREE;
-+ }
-+
-+
-+/* Handle an acall attribute;
-+ arguments as in struct attribute_spec.handler. */
-+
-+static tree
-+avr32_handle_acall_attribute (tree * node, tree name,
-+ tree args ATTRIBUTE_UNUSED,
-+ int flags ATTRIBUTE_UNUSED, bool * no_add_attrs)
-+ {
-+ if (TREE_CODE (*node) == FUNCTION_TYPE || TREE_CODE (*node) == METHOD_TYPE)
-+ {
-+ warning ("`%s' attribute not yet supported...",
-+ IDENTIFIER_POINTER (name));
-+ *no_add_attrs = true;
-+ return NULL_TREE;
-+ }
-+
-+ warning ("`%s' attribute only applies to functions",
-+ IDENTIFIER_POINTER (name));
-+ *no_add_attrs = true;
-+ return NULL_TREE;
-+ }
-+
-+
-+/* Return 0 if the attributes for two types are incompatible, 1 if they
-+ are compatible, and 2 if they are nearly compatible (which causes a
-+ warning to be generated). */
-+
-+static int
-+avr32_comp_type_attributes (tree type1, tree type2)
-+ {
-+ int acall1, acall2, isr1, isr2, naked1, naked2;
-+
-+ /* Check for mismatch of non-default calling convention. */
-+ if (TREE_CODE (type1) != FUNCTION_TYPE)
-+ return 1;
-+
-+ /* Check for mismatched call attributes. */
-+ acall1 = lookup_attribute ("acall", TYPE_ATTRIBUTES (type1)) != NULL;
-+ acall2 = lookup_attribute ("acall", TYPE_ATTRIBUTES (type2)) != NULL;
-+ naked1 = lookup_attribute ("naked", TYPE_ATTRIBUTES (type1)) != NULL;
-+ naked2 = lookup_attribute ("naked", TYPE_ATTRIBUTES (type2)) != NULL;
-+ isr1 = lookup_attribute ("isr", TYPE_ATTRIBUTES (type1)) != NULL;
-+ if (!isr1)
-+ isr1 = lookup_attribute ("interrupt", TYPE_ATTRIBUTES (type1)) != NULL;
-+
-+ isr2 = lookup_attribute ("isr", TYPE_ATTRIBUTES (type2)) != NULL;
-+ if (!isr2)
-+ isr2 = lookup_attribute ("interrupt", TYPE_ATTRIBUTES (type2)) != NULL;
-+
-+ if ((acall1 && isr2)
-+ || (acall2 && isr1) || (naked1 && isr2) || (naked2 && isr1))
-+ return 0;
-+
-+ return 1;
-+ }
-+
-+
-+/* Computes the type of the current function. */
-+
-+static unsigned long
-+avr32_compute_func_type (void)
-+ {
-+ unsigned long type = AVR32_FT_UNKNOWN;
-+ tree a;
-+ tree attr;
-+
-+ if (TREE_CODE (current_function_decl) != FUNCTION_DECL)
-+ abort ();
-+
-+ /* Decide if the current function is volatile. Such functions never
-+ return, and many memory cycles can be saved by not storing register
-+ values that will never be needed again. This optimization was added to
-+ speed up context switching in a kernel application. */
-+ if (optimize > 0
-+ && TREE_NOTHROW (current_function_decl)
-+ && TREE_THIS_VOLATILE (current_function_decl))
-+ type |= AVR32_FT_VOLATILE;
-+
-+ if (cfun->static_chain_decl != NULL)
-+ type |= AVR32_FT_NESTED;
-+
-+ attr = DECL_ATTRIBUTES (current_function_decl);
-+
-+ a = lookup_attribute ("isr", attr);
-+ if (a == NULL_TREE)
-+ a = lookup_attribute ("interrupt", attr);
-+
-+ if (a == NULL_TREE)
-+ type |= AVR32_FT_NORMAL;
-+ else
-+ type |= avr32_isr_value (TREE_VALUE (a));
-+
-+
-+ a = lookup_attribute ("acall", attr);
-+ if (a != NULL_TREE)
-+ type |= AVR32_FT_ACALL;
-+
-+ a = lookup_attribute ("naked", attr);
-+ if (a != NULL_TREE)
-+ type |= AVR32_FT_NAKED;
-+
-+ return type;
-+ }
-+
-+/* Returns the type of the current function. */
-+
-+static unsigned long
-+avr32_current_func_type (void)
-+ {
-+ if (AVR32_FUNC_TYPE (cfun->machine->func_type) == AVR32_FT_UNKNOWN)
-+ cfun->machine->func_type = avr32_compute_func_type ();
-+
-+ return cfun->machine->func_type;
-+ }
-+
-+/*
-+ This target hook should return true if we should not pass type solely
-+ in registers. The file expr.h defines a definition that is usually appropriate,
-+ refer to expr.h for additional documentation.
-+ */
-+bool
-+avr32_must_pass_in_stack (enum machine_mode mode ATTRIBUTE_UNUSED, tree type)
-+ {
-+ if (type && AGGREGATE_TYPE_P (type)
-+ /* If the alignment is less than the size then pass in the struct on
-+ the stack. */
-+ && ((unsigned int) TYPE_ALIGN_UNIT (type) <
-+ (unsigned int) int_size_in_bytes (type))
-+ /* If we support unaligned word accesses then structs of size 4 and 8
-+ can have any alignment and still be passed in registers. */
-+ && !(TARGET_UNALIGNED_WORD
-+ && (int_size_in_bytes (type) == 4
-+ || int_size_in_bytes (type) == 8))
-+ /* Double word structs need only a word alignment. */
-+ && !(int_size_in_bytes (type) == 8 && TYPE_ALIGN_UNIT (type) >= 4))
-+ return true;
-+
-+ if (type && AGGREGATE_TYPE_P (type)
-+ /* Structs of size 3,5,6,7 are always passed in registers. */
-+ && (int_size_in_bytes (type) == 3
-+ || int_size_in_bytes (type) == 5
-+ || int_size_in_bytes (type) == 6 || int_size_in_bytes (type) == 7))
-+ return true;
-+
-+
-+ return (type && TREE_ADDRESSABLE (type));
-+ }
-+
-+
-+bool
-+avr32_strict_argument_naming (CUMULATIVE_ARGS * ca ATTRIBUTE_UNUSED)
-+ {
-+ return true;
-+ }
-+
-+/*
-+ This target hook should return true if an argument at the position indicated
-+ by cum should be passed by reference. This predicate is queried after target
-+ independent reasons for being passed by reference, such as TREE_ADDRESSABLE (type).
-+
-+ If the hook returns true, a copy of that argument is made in memory and a
-+ pointer to the argument is passed instead of the argument itself. The pointer
-+ is passed in whatever way is appropriate for passing a pointer to that type.
-+ */
-+bool
-+avr32_pass_by_reference (CUMULATIVE_ARGS * cum ATTRIBUTE_UNUSED,
-+ enum machine_mode mode ATTRIBUTE_UNUSED,
-+ tree type, bool named ATTRIBUTE_UNUSED)
-+ {
-+ return (type && (TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST));
-+ }
-+
-+static int
-+avr32_arg_partial_bytes (CUMULATIVE_ARGS * pcum ATTRIBUTE_UNUSED,
-+ enum machine_mode mode ATTRIBUTE_UNUSED,
-+ tree type ATTRIBUTE_UNUSED,
-+ bool named ATTRIBUTE_UNUSED)
-+ {
-+ return 0;
-+ }
-+
-+
-+struct gcc_target targetm = TARGET_INITIALIZER;
-+
-+/*
-+ Table used to convert from register number in the assembler instructions and
-+ the register numbers used in gcc.
-+ */
-+const int avr32_function_arg_reglist[] = {
-+ INTERNAL_REGNUM (12),
-+ INTERNAL_REGNUM (11),
-+ INTERNAL_REGNUM (10),
-+ INTERNAL_REGNUM (9),
-+ INTERNAL_REGNUM (8)
-+};
-+
-+rtx avr32_compare_op0 = NULL_RTX;
-+rtx avr32_compare_op1 = NULL_RTX;
-+rtx avr32_compare_operator = NULL_RTX;
-+rtx avr32_acc_cache = NULL_RTX;
-+
-+/*
-+ Returns nonzero if it is allowed to store a value of mode mode in hard
-+ register number regno.
-+ */
-+int
-+avr32_hard_regno_mode_ok (int regnr, enum machine_mode mode)
-+ {
-+ /* We allow only float modes in the fp-registers */
-+ if (regnr >= FIRST_FP_REGNUM
-+ && regnr <= LAST_FP_REGNUM && GET_MODE_CLASS (mode) != MODE_FLOAT)
-+ {
-+ return 0;
-+ }
-+
-+ switch (mode)
-+ {
-+ case DImode: /* long long */
-+ case DFmode: /* double */
-+ case SCmode: /* __complex__ float */
-+ case CSImode: /* __complex__ int */
-+ if (regnr < 4)
-+ { /* long long int not supported in r12, sp, lr
-+ or pc. */
-+ return 0;
-+ }
-+ else
-+ {
-+ if (regnr % 2) /* long long int has to be refered in even
-+ registers. */
-+ return 0;
-+ else
-+ return 1;
-+ }
-+ case CDImode: /* __complex__ long long */
-+ case DCmode: /* __complex__ double */
-+ case TImode: /* 16 bytes */
-+ if (regnr < 7)
-+ return 0;
-+ else if (regnr % 2)
-+ return 0;
-+ else
-+ return 1;
-+ default:
-+ return 1;
-+ }
-+ }
-+
-+
-+int
-+avr32_rnd_operands (rtx add, rtx shift)
-+ {
-+ if (GET_CODE (shift) == CONST_INT &&
-+ GET_CODE (add) == CONST_INT && INTVAL (shift) > 0)
-+ {
-+ if ((1 << (INTVAL (shift) - 1)) == INTVAL (add))
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+
-+
-+int
-+avr32_const_ok_for_constraint_p (HOST_WIDE_INT value, char c, const char *str)
-+ {
-+ switch (c)
-+ {
-+ case 'K':
-+ case 'I':
-+ {
-+ HOST_WIDE_INT min_value = 0, max_value = 0;
-+ char size_str[3];
-+ int const_size;
-+
-+ size_str[0] = str[2];
-+ size_str[1] = str[3];
-+ size_str[2] = '\0';
-+ const_size = atoi (size_str);
-+
-+ if (toupper (str[1]) == 'U')
-+ {
-+ min_value = 0;
-+ max_value = (1 << const_size) - 1;
-+ }
-+ else if (toupper (str[1]) == 'S')
-+ {
-+ min_value = -(1 << (const_size - 1));
-+ max_value = (1 << (const_size - 1)) - 1;
-+ }
-+
-+ if (c == 'I')
-+ {
-+ value = -value;
-+ }
-+
-+ if (value >= min_value && value <= max_value)
-+ {
-+ return 1;
-+ }
-+ break;
-+ }
-+ case 'M':
-+ return avr32_mask_upper_bits_operand (GEN_INT (value), VOIDmode);
-+ }
-+
-+ return 0;
-+ }
-+
-+
-+/*Compute mask of which floating-point registers needs saving upon
-+ entry to this function*/
-+static unsigned long
-+avr32_compute_save_fp_reg_mask (void)
-+ {
-+ unsigned long func_type = avr32_current_func_type ();
-+ unsigned int save_reg_mask = 0;
-+ unsigned int reg;
-+ unsigned int max_reg = 7;
-+ int save_all_call_used_regs = FALSE;
-+
-+ /* This only applies for hardware floating-point implementation. */
-+ if (!TARGET_HARD_FLOAT)
-+ return 0;
-+
-+ if (IS_INTERRUPT (func_type))
-+ {
-+
-+ /* Interrupt functions must not corrupt any registers, even call
-+ clobbered ones. If this is a leaf function we can just examine the
-+ registers used by the RTL, but otherwise we have to assume that
-+ whatever function is called might clobber anything, and so we have
-+ to save all the call-clobbered registers as well. */
-+ max_reg = 13;
-+ save_all_call_used_regs = !current_function_is_leaf;
-+ }
-+
-+ /* All used registers used must be saved */
-+ for (reg = 0; reg <= max_reg; reg++)
-+ if (regs_ever_live[INTERNAL_FP_REGNUM (reg)]
-+ || (save_all_call_used_regs
-+ && call_used_regs[INTERNAL_FP_REGNUM (reg)]))
-+ save_reg_mask |= (1 << reg);
-+
-+ return save_reg_mask;
-+ }
-+
-+/*Compute mask of registers which needs saving upon function entry */
-+static unsigned long
-+avr32_compute_save_reg_mask (int push)
-+ {
-+ unsigned long func_type;
-+ unsigned int save_reg_mask = 0;
-+ unsigned int reg;
-+
-+ func_type = avr32_current_func_type ();
-+
-+ if (IS_INTERRUPT (func_type))
-+ {
-+ unsigned int max_reg = 12;
-+
-+
-+ /* Get the banking scheme for the interrupt */
-+ switch (func_type)
-+ {
-+ case AVR32_FT_ISR_FULL:
-+ max_reg = 0;
-+ break;
-+ case AVR32_FT_ISR_HALF:
-+ max_reg = 7;
-+ break;
-+ case AVR32_FT_ISR_NONE:
-+ max_reg = 12;
-+ break;
-+ }
-+
-+ /* Interrupt functions must not corrupt any registers, even call
-+ clobbered ones. If this is a leaf function we can just examine the
-+ registers used by the RTL, but otherwise we have to assume that
-+ whatever function is called might clobber anything, and so we have
-+ to save all the call-clobbered registers as well. */
-+
-+ /* Need not push the registers r8-r12 for AVR32A architectures, as this
-+ is automatially done in hardware. We also do not have any shadow
-+ registers. */
-+ if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A)
-+ {
-+ max_reg = 7;
-+ func_type = AVR32_FT_ISR_NONE;
-+ }
-+
-+ /* All registers which are used and is not shadowed must be saved */
-+ for (reg = 0; reg <= max_reg; reg++)
-+ if (regs_ever_live[INTERNAL_REGNUM (reg)]
-+ || (!current_function_is_leaf
-+ && call_used_regs[INTERNAL_REGNUM (reg)]))
-+ save_reg_mask |= (1 << reg);
-+
-+ /* Check LR */
-+ if ((regs_ever_live[LR_REGNUM]
-+ || !current_function_is_leaf || frame_pointer_needed)
-+ /* Only non-shadowed register models */
-+ && (func_type == AVR32_FT_ISR_NONE))
-+ save_reg_mask |= (1 << ASM_REGNUM (LR_REGNUM));
-+
-+ /* Make sure that the GOT register is pushed. */
-+ if (max_reg >= ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM)
-+ && current_function_uses_pic_offset_table)
-+ save_reg_mask |= (1 << ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM));
-+
-+ }
-+ else
-+ {
-+ int use_pushm = optimize_size;
-+
-+ /* In the normal case we only need to save those registers which are
-+ call saved and which are used by this function. */
-+ for (reg = 0; reg <= 7; reg++)
-+ if (regs_ever_live[INTERNAL_REGNUM (reg)]
-+ && !call_used_regs[INTERNAL_REGNUM (reg)])
-+ save_reg_mask |= (1 << reg);
-+
-+ /* Make sure that the GOT register is pushed. */
-+ if (current_function_uses_pic_offset_table)
-+ save_reg_mask |= (1 << ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM));
-+
-+
-+ /* If we optimize for size and do not have anonymous arguments: use
-+ popm/pushm always */
-+ if (use_pushm)
-+ {
-+ if ((save_reg_mask & (1 << 0))
-+ || (save_reg_mask & (1 << 1))
-+ || (save_reg_mask & (1 << 2)) || (save_reg_mask & (1 << 3)))
-+ save_reg_mask |= 0xf;
-+
-+ if ((save_reg_mask & (1 << 4))
-+ || (save_reg_mask & (1 << 5))
-+ || (save_reg_mask & (1 << 6)) || (save_reg_mask & (1 << 7)))
-+ save_reg_mask |= 0xf0;
-+
-+ if ((save_reg_mask & (1 << 8)) || (save_reg_mask & (1 << 9)))
-+ save_reg_mask |= 0x300;
-+ }
-+
-+
-+ /* Check LR */
-+ if ((regs_ever_live[LR_REGNUM]
-+ || !current_function_is_leaf
-+ || (optimize_size
-+ && save_reg_mask
-+ && !current_function_calls_eh_return) || frame_pointer_needed))
-+ {
-+ if (push
-+ /* Never pop LR into PC for functions which
-+ calls __builtin_eh_return, since we need to
-+ fix the SP after the restoring of the registers
-+ and before returning. */
-+ || current_function_calls_eh_return)
-+ {
-+ /* Push/Pop LR */
-+ save_reg_mask |= (1 << ASM_REGNUM (LR_REGNUM));
-+ }
-+ else
-+ {
-+ /* Pop PC */
-+ save_reg_mask |= (1 << ASM_REGNUM (PC_REGNUM));
-+ }
-+ }
-+ }
-+
-+
-+ /* Save registers so the exception handler can modify them. */
-+ if (current_function_calls_eh_return)
-+ {
-+ unsigned int i;
-+
-+ for (i = 0;; i++)
-+ {
-+ reg = EH_RETURN_DATA_REGNO (i);
-+ if (reg == INVALID_REGNUM)
-+ break;
-+ save_reg_mask |= 1 << ASM_REGNUM (reg);
-+ }
-+ }
-+
-+ return save_reg_mask;
-+ }
-+
-+/*Compute total size in bytes of all saved registers */
-+static int
-+avr32_get_reg_mask_size (int reg_mask)
-+ {
-+ int reg, size;
-+ size = 0;
-+
-+ for (reg = 0; reg <= 15; reg++)
-+ if (reg_mask & (1 << reg))
-+ size += 4;
-+
-+ return size;
-+ }
-+
-+/*Get a register from one of the registers which are saved onto the stack
-+ upon function entry */
-+
-+static int
-+avr32_get_saved_reg (int save_reg_mask)
-+ {
-+ unsigned int reg;
-+
-+ /* Find the first register which is saved in the saved_reg_mask */
-+ for (reg = 0; reg <= 15; reg++)
-+ if (save_reg_mask & (1 << reg))
-+ return reg;
-+
-+ return -1;
-+ }
-+
-+/* Return 1 if it is possible to return using a single instruction. */
-+int
-+avr32_use_return_insn (int iscond)
-+ {
-+ unsigned int func_type = avr32_current_func_type ();
-+ unsigned long saved_int_regs;
-+ unsigned long saved_fp_regs;
-+
-+ /* Never use a return instruction before reload has run. */
-+ if (!reload_completed)
-+ return 0;
-+
-+ /* Must adjust the stack for vararg functions. */
-+ if (current_function_args_info.uses_anonymous_args)
-+ return 0;
-+
-+ /* If there a stack adjstment. */
-+ if (get_frame_size ())
-+ return 0;
-+
-+ saved_int_regs = avr32_compute_save_reg_mask (TRUE);
-+ saved_fp_regs = avr32_compute_save_fp_reg_mask ();
-+
-+ /* Functions which have saved fp-regs on the stack can not be performed in
-+ one instruction */
-+ if (saved_fp_regs)
-+ return 0;
-+
-+ /* Conditional returns can not be performed in one instruction if we need
-+ to restore registers from the stack */
-+ if (iscond && saved_int_regs)
-+ return 0;
-+
-+ /* Conditional return can not be used for interrupt handlers. */
-+ if (iscond && IS_INTERRUPT (func_type))
-+ return 0;
-+
-+ /* For interrupt handlers which needs to pop registers */
-+ if (saved_int_regs && IS_INTERRUPT (func_type))
-+ return 0;
-+
-+
-+ /* If there are saved registers but the LR isn't saved, then we need two
-+ instructions for the return. */
-+ if (saved_int_regs && !(saved_int_regs & (1 << ASM_REGNUM (LR_REGNUM))))
-+ return 0;
-+
-+
-+ return 1;
-+ }
-+
-+
-+/*Generate some function prologue info in the assembly file*/
-+
-+void
-+avr32_target_asm_function_prologue (FILE * f, HOST_WIDE_INT frame_size)
-+ {
-+ if (IS_NAKED (avr32_current_func_type ()))
-+ fprintf (f,
-+ "\t# Function is naked: Prologue and epilogue provided by programmer\n");
-+
-+ if (IS_INTERRUPT (avr32_current_func_type ()))
-+ {
-+ switch (avr32_current_func_type ())
-+ {
-+ case AVR32_FT_ISR_FULL:
-+ fprintf (f,
-+ "\t# Interrupt Function: Fully shadowed register file\n");
-+ break;
-+ case AVR32_FT_ISR_HALF:
-+ fprintf (f,
-+ "\t# Interrupt Function: Half shadowed register file\n");
-+ break;
-+ default:
-+ case AVR32_FT_ISR_NONE:
-+ fprintf (f, "\t# Interrupt Function: No shadowed register file\n");
-+ break;
-+ }
-+ }
-+
-+
-+ fprintf (f, "\t# args = %i, frame = %li, pretend = %i\n",
-+ current_function_args_size, frame_size,
-+ current_function_pretend_args_size);
-+
-+ fprintf (f, "\t# frame_needed = %i, leaf_function = %i\n",
-+ frame_pointer_needed, current_function_is_leaf);
-+
-+ fprintf (f, "\t# uses_anonymous_args = %i\n",
-+ current_function_args_info.uses_anonymous_args);
-+ if (current_function_calls_eh_return)
-+ fprintf (f, "\t# Calls __builtin_eh_return.\n");
-+
-+ }
-+
-+
-+/* Generate and emit an insn that we will recognize as a pushm or stm.
-+ Unfortunately, since this insn does not reflect very well the actual
-+ semantics of the operation, we need to annotate the insn for the benefit
-+ of DWARF2 frame unwind information. */
-+
-+int avr32_convert_to_reglist16 (int reglist8_vect);
-+
-+static rtx
-+emit_multi_reg_push (int reglist, int usePUSHM)
-+ {
-+ rtx insn;
-+ rtx dwarf;
-+ rtx tmp;
-+ rtx reg;
-+ int i;
-+ int nr_regs;
-+ int index = 0;
-+
-+ if (usePUSHM)
-+ {
-+ insn = emit_insn (gen_pushm (gen_rtx_CONST_INT (SImode, reglist)));
-+ reglist = avr32_convert_to_reglist16 (reglist);
-+ }
-+ else
-+ {
-+ insn = emit_insn (gen_stm (stack_pointer_rtx,
-+ gen_rtx_CONST_INT (SImode, reglist),
-+ gen_rtx_CONST_INT (SImode, 1)));
-+ }
-+
-+ nr_regs = avr32_get_reg_mask_size (reglist) / 4;
-+ dwarf = gen_rtx_SEQUENCE (VOIDmode, rtvec_alloc (nr_regs + 1));
-+
-+ for (i = 15; i >= 0; i--)
-+ {
-+ if (reglist & (1 << i))
-+ {
-+ reg = gen_rtx_REG (SImode, INTERNAL_REGNUM (i));
-+ tmp = gen_rtx_SET (VOIDmode,
-+ gen_rtx_MEM (SImode,
-+ plus_constant (stack_pointer_rtx,
-+ 4 * index)), reg);
-+ RTX_FRAME_RELATED_P (tmp) = 1;
-+ XVECEXP (dwarf, 0, 1 + index++) = tmp;
-+ }
-+ }
-+
-+ tmp = gen_rtx_SET (SImode,
-+ stack_pointer_rtx,
-+ gen_rtx_PLUS (SImode,
-+ stack_pointer_rtx,
-+ GEN_INT (-4 * nr_regs)));
-+ RTX_FRAME_RELATED_P (tmp) = 1;
-+ XVECEXP (dwarf, 0, 0) = tmp;
-+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, dwarf,
-+ REG_NOTES (insn));
-+ return insn;
-+ }
-+
-+
-+static rtx
-+emit_multi_fp_reg_push (int reglist)
-+ {
-+ rtx insn;
-+ rtx dwarf;
-+ rtx tmp;
-+ rtx reg;
-+ int i;
-+ int nr_regs;
-+ int index = 0;
-+
-+ insn = emit_insn (gen_stm_fp (stack_pointer_rtx,
-+ gen_rtx_CONST_INT (SImode, reglist),
-+ gen_rtx_CONST_INT (SImode, 1)));
-+
-+ nr_regs = avr32_get_reg_mask_size (reglist) / 4;
-+ dwarf = gen_rtx_SEQUENCE (VOIDmode, rtvec_alloc (nr_regs + 1));
-+
-+ for (i = 15; i >= 0; i--)
-+ {
-+ if (reglist & (1 << i))
-+ {
-+ reg = gen_rtx_REG (SImode, INTERNAL_FP_REGNUM (i));
-+ tmp = gen_rtx_SET (VOIDmode,
-+ gen_rtx_MEM (SImode,
-+ plus_constant (stack_pointer_rtx,
-+ 4 * index)), reg);
-+ RTX_FRAME_RELATED_P (tmp) = 1;
-+ XVECEXP (dwarf, 0, 1 + index++) = tmp;
-+ }
-+ }
-+
-+ tmp = gen_rtx_SET (SImode,
-+ stack_pointer_rtx,
-+ gen_rtx_PLUS (SImode,
-+ stack_pointer_rtx,
-+ GEN_INT (-4 * nr_regs)));
-+ RTX_FRAME_RELATED_P (tmp) = 1;
-+ XVECEXP (dwarf, 0, 0) = tmp;
-+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, dwarf,
-+ REG_NOTES (insn));
-+ return insn;
-+ }
-+
-+rtx
-+avr32_gen_load_multiple (rtx * regs, int count, rtx from,
-+ int write_back, int in_struct_p, int scalar_p)
-+ {
-+
-+ rtx result;
-+ int i = 0, j;
-+
-+ result =
-+ gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count + (write_back ? 1 : 0)));
-+
-+ if (write_back)
-+ {
-+ XVECEXP (result, 0, 0)
-+ = gen_rtx_SET (GET_MODE (from), from,
-+ plus_constant (from, count * 4));
-+ i = 1;
-+ count++;
-+ }
-+
-+
-+ for (j = 0; i < count; i++, j++)
-+ {
-+ rtx unspec;
-+ rtx mem = gen_rtx_MEM (SImode, plus_constant (from, j * 4));
-+ MEM_IN_STRUCT_P (mem) = in_struct_p;
-+ MEM_SCALAR_P (mem) = scalar_p;
-+ unspec = gen_rtx_UNSPEC (VOIDmode, gen_rtvec (1, mem), UNSPEC_LDM);
-+ XVECEXP (result, 0, i) = gen_rtx_SET (VOIDmode, regs[j], unspec);
-+ }
-+
-+ return result;
-+ }
-+
-+
-+rtx
-+avr32_gen_store_multiple (rtx * regs, int count, rtx to,
-+ int in_struct_p, int scalar_p)
-+ {
-+ rtx result;
-+ int i = 0, j;
-+
-+ result = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
-+
-+ for (j = 0; i < count; i++, j++)
-+ {
-+ rtx mem = gen_rtx_MEM (SImode, plus_constant (to, j * 4));
-+ MEM_IN_STRUCT_P (mem) = in_struct_p;
-+ MEM_SCALAR_P (mem) = scalar_p;
-+ XVECEXP (result, 0, i)
-+ = gen_rtx_SET (VOIDmode, mem,
-+ gen_rtx_UNSPEC (VOIDmode,
-+ gen_rtvec (1, regs[j]),
-+ UNSPEC_STORE_MULTIPLE));
-+ }
-+
-+ return result;
-+ }
-+
-+
-+/* Move a block of memory if it is word aligned or we support unaligned
-+ word memory accesses. The size must be maximum 64 bytes. */
-+
-+int
-+avr32_gen_movmemsi (rtx * operands)
-+ {
-+ HOST_WIDE_INT bytes_to_go;
-+ rtx src, dst;
-+ rtx st_src, st_dst;
-+ int ptr_offset = 0;
-+ int block_size;
-+ int dst_in_struct_p, src_in_struct_p;
-+ int dst_scalar_p, src_scalar_p;
-+ int unaligned;
-+
-+ if (GET_CODE (operands[2]) != CONST_INT
-+ || GET_CODE (operands[3]) != CONST_INT
-+ || INTVAL (operands[2]) > 64
-+ || ((INTVAL (operands[3]) & 3) && !TARGET_UNALIGNED_WORD))
-+ return 0;
-+
-+ unaligned = (INTVAL (operands[3]) & 3) != 0;
-+
-+ block_size = 4;
-+
-+ st_dst = XEXP (operands[0], 0);
-+ st_src = XEXP (operands[1], 0);
-+
-+ dst_in_struct_p = MEM_IN_STRUCT_P (operands[0]);
-+ dst_scalar_p = MEM_SCALAR_P (operands[0]);
-+ src_in_struct_p = MEM_IN_STRUCT_P (operands[1]);
-+ src_scalar_p = MEM_SCALAR_P (operands[1]);
-+
-+ dst = copy_to_mode_reg (SImode, st_dst);
-+ src = copy_to_mode_reg (SImode, st_src);
-+
-+ bytes_to_go = INTVAL (operands[2]);
-+
-+ while (bytes_to_go)
-+ {
-+ enum machine_mode move_mode;
-+ /* (Seems to be a problem with reloads for the movti pattern so this is
-+ disabled until that problem is resolved)
-+ UPDATE: Problem seems to be solved now.... */
-+ if (bytes_to_go >= GET_MODE_SIZE (TImode) && !unaligned
-+ /* Do not emit ldm/stm for UC3 as ld.d/st.d is more optimal. */
-+ && avr32_arch->arch_type != ARCH_TYPE_AVR32_UC)
-+ move_mode = TImode;
-+ else if ((bytes_to_go >= GET_MODE_SIZE (DImode)) && !unaligned)
-+ move_mode = DImode;
-+ else if (bytes_to_go >= GET_MODE_SIZE (SImode))
-+ move_mode = SImode;
-+ else
-+ move_mode = QImode;
-+
-+ {
-+ rtx dst_mem = gen_rtx_MEM (move_mode,
-+ gen_rtx_PLUS (SImode, dst,
-+ GEN_INT (ptr_offset)));
-+ rtx src_mem = gen_rtx_MEM (move_mode,
-+ gen_rtx_PLUS (SImode, src,
-+ GEN_INT (ptr_offset)));
-+ ptr_offset += GET_MODE_SIZE (move_mode);
-+ bytes_to_go -= GET_MODE_SIZE (move_mode);
-+
-+ MEM_IN_STRUCT_P (dst_mem) = dst_in_struct_p;
-+ MEM_SCALAR_P (dst_mem) = dst_scalar_p;
-+
-+ MEM_IN_STRUCT_P (src_mem) = src_in_struct_p;
-+ MEM_SCALAR_P (src_mem) = src_scalar_p;
-+ emit_move_insn (dst_mem, src_mem);
-+
-+ }
-+ }
-+
-+ return 1;
-+ }
-+
-+
-+
-+/*Expand the prologue instruction*/
-+void
-+avr32_expand_prologue (void)
-+ {
-+ rtx insn, dwarf;
-+ unsigned long saved_reg_mask, saved_fp_reg_mask;
-+ int reglist8 = 0;
-+
-+ /* Naked functions does not have a prologue */
-+ if (IS_NAKED (avr32_current_func_type ()))
-+ return;
-+
-+ saved_reg_mask = avr32_compute_save_reg_mask (TRUE);
-+
-+ if (saved_reg_mask)
-+ {
-+ /* Must push used registers */
-+
-+ /* Should we use POPM or LDM? */
-+ int usePUSHM = TRUE;
-+ reglist8 = 0;
-+ if (((saved_reg_mask & (1 << 0)) ||
-+ (saved_reg_mask & (1 << 1)) ||
-+ (saved_reg_mask & (1 << 2)) || (saved_reg_mask & (1 << 3))))
-+ {
-+ /* One of R0-R3 should at least be pushed */
-+ if (((saved_reg_mask & (1 << 0)) &&
-+ (saved_reg_mask & (1 << 1)) &&
-+ (saved_reg_mask & (1 << 2)) && (saved_reg_mask & (1 << 3))))
-+ {
-+ /* All should be pushed */
-+ reglist8 |= 0x01;
-+ }
-+ else
-+ {
-+ usePUSHM = FALSE;
-+ }
-+ }
-+
-+ if (((saved_reg_mask & (1 << 4)) ||
-+ (saved_reg_mask & (1 << 5)) ||
-+ (saved_reg_mask & (1 << 6)) || (saved_reg_mask & (1 << 7))))
-+ {
-+ /* One of R4-R7 should at least be pushed */
-+ if (((saved_reg_mask & (1 << 4)) &&
-+ (saved_reg_mask & (1 << 5)) &&
-+ (saved_reg_mask & (1 << 6)) && (saved_reg_mask & (1 << 7))))
-+ {
-+ if (usePUSHM)
-+ /* All should be pushed */
-+ reglist8 |= 0x02;
-+ }
-+ else
-+ {
-+ usePUSHM = FALSE;
-+ }
-+ }
-+
-+ if (((saved_reg_mask & (1 << 8)) || (saved_reg_mask & (1 << 9))))
-+ {
-+ /* One of R8-R9 should at least be pushed */
-+ if (((saved_reg_mask & (1 << 8)) && (saved_reg_mask & (1 << 9))))
-+ {
-+ if (usePUSHM)
-+ /* All should be pushed */
-+ reglist8 |= 0x04;
-+ }
-+ else
-+ {
-+ usePUSHM = FALSE;
-+ }
-+ }
-+
-+ if (saved_reg_mask & (1 << 10))
-+ reglist8 |= 0x08;
-+
-+ if (saved_reg_mask & (1 << 11))
-+ reglist8 |= 0x10;
-+
-+ if (saved_reg_mask & (1 << 12))
-+ reglist8 |= 0x20;
-+
-+ if (saved_reg_mask & (1 << ASM_REGNUM (LR_REGNUM)))
-+ {
-+ /* Push LR */
-+ reglist8 |= 0x40;
-+ }
-+
-+ if (usePUSHM)
-+ {
-+ insn = emit_multi_reg_push (reglist8, TRUE);
-+ }
-+ else
-+ {
-+ insn = emit_multi_reg_push (saved_reg_mask, FALSE);
-+ }
-+ RTX_FRAME_RELATED_P (insn) = 1;
-+
-+ /* Prevent this instruction from being scheduled after any other
-+ instructions. */
-+ emit_insn (gen_blockage ());
-+ }
-+
-+ saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+ if (saved_fp_reg_mask)
-+ {
-+ insn = emit_multi_fp_reg_push (saved_fp_reg_mask);
-+ RTX_FRAME_RELATED_P (insn) = 1;
-+
-+ /* Prevent this instruction from being scheduled after any other
-+ instructions. */
-+ emit_insn (gen_blockage ());
-+ }
-+
-+ /* Set frame pointer */
-+ if (frame_pointer_needed)
-+ {
-+ insn = emit_move_insn (frame_pointer_rtx, stack_pointer_rtx);
-+ RTX_FRAME_RELATED_P (insn) = 1;
-+ }
-+
-+ if (get_frame_size () > 0)
-+ {
-+ if (avr32_const_ok_for_constraint_p (get_frame_size (), 'K', "Ks21"))
-+ {
-+ insn = emit_insn (gen_rtx_SET (SImode,
-+ stack_pointer_rtx,
-+ gen_rtx_PLUS (SImode,
-+ stack_pointer_rtx,
-+ gen_rtx_CONST_INT
-+ (SImode,
-+ -get_frame_size
-+ ()))));
-+ RTX_FRAME_RELATED_P (insn) = 1;
-+ }
-+ else
-+ {
-+ /* Immediate is larger than k21 We must either check if we can use
-+ one of the pushed reegisters as temporary storage or we must
-+ make us a temp register by pushing a register to the stack. */
-+ rtx temp_reg, const_pool_entry, insn;
-+ if (saved_reg_mask)
-+ {
-+ temp_reg =
-+ gen_rtx_REG (SImode,
-+ INTERNAL_REGNUM (avr32_get_saved_reg
-+ (saved_reg_mask)));
-+ }
-+ else
-+ {
-+ temp_reg = gen_rtx_REG (SImode, INTERNAL_REGNUM (7));
-+ emit_move_insn (gen_rtx_MEM
-+ (SImode,
-+ gen_rtx_PRE_DEC (SImode, stack_pointer_rtx)),
-+ temp_reg);
-+ }
-+
-+ const_pool_entry =
-+ force_const_mem (SImode,
-+ gen_rtx_CONST_INT (SImode, get_frame_size ()));
-+ emit_move_insn (temp_reg, const_pool_entry);
-+
-+ insn = emit_insn (gen_rtx_SET (SImode,
-+ stack_pointer_rtx,
-+ gen_rtx_MINUS (SImode,
-+ stack_pointer_rtx,
-+ temp_reg)));
-+
-+ dwarf = gen_rtx_SET (VOIDmode, stack_pointer_rtx,
-+ gen_rtx_PLUS (SImode, stack_pointer_rtx,
-+ GEN_INT (-get_frame_size ())));
-+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
-+ dwarf, REG_NOTES (insn));
-+ RTX_FRAME_RELATED_P (insn) = 1;
-+
-+ if (!saved_reg_mask)
-+ {
-+ insn =
-+ emit_move_insn (temp_reg,
-+ gen_rtx_MEM (SImode,
-+ gen_rtx_POST_INC (SImode,
-+ gen_rtx_REG
-+ (SImode,
-+ 13))));
-+ }
-+
-+ /* Mark the temp register as dead */
-+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_DEAD, temp_reg,
-+ REG_NOTES (insn));
-+
-+
-+ }
-+
-+ /* Prevent the the stack adjustment to be scheduled after any
-+ instructions using the frame pointer. */
-+ emit_insn (gen_blockage ());
-+ }
-+
-+ /* Load GOT */
-+ if (flag_pic)
-+ {
-+ avr32_load_pic_register ();
-+
-+ /* gcc does not know that load or call instructions might use the pic
-+ register so it might schedule these instructions before the loading
-+ of the pic register. To avoid this emit a barrier for now. TODO!
-+ Find out a better way to let gcc know which instructions might use
-+ the pic register. */
-+ emit_insn (gen_blockage ());
-+ }
-+ return;
-+ }
-+
-+void
-+avr32_set_return_address (rtx source, rtx scratch)
-+ {
-+ rtx addr;
-+ unsigned long saved_regs;
-+
-+ saved_regs = avr32_compute_save_reg_mask (TRUE);
-+
-+ if (!(saved_regs & (1 << ASM_REGNUM (LR_REGNUM))))
-+ emit_move_insn (gen_rtx_REG (Pmode, LR_REGNUM), source);
-+ else
-+ {
-+ if (frame_pointer_needed)
-+ addr = gen_rtx_REG (Pmode, FRAME_POINTER_REGNUM);
-+ else
-+ if (avr32_const_ok_for_constraint_p (get_frame_size (), 'K', "Ks16"))
-+ {
-+ addr = plus_constant (stack_pointer_rtx, get_frame_size ());
-+ }
-+ else
-+ {
-+ emit_insn (gen_movsi (scratch, GEN_INT (get_frame_size ())));
-+ addr = scratch;
-+ }
-+ emit_move_insn (gen_rtx_MEM (Pmode, addr), source);
-+ }
-+ }
-+
-+
-+
-+/* Return the length of INSN. LENGTH is the initial length computed by
-+ attributes in the machine-description file. */
-+
-+int
-+avr32_adjust_insn_length (rtx insn ATTRIBUTE_UNUSED,
-+ int length ATTRIBUTE_UNUSED)
-+ {
-+ return length;
-+ }
-+
-+void
-+avr32_output_return_instruction (int single_ret_inst ATTRIBUTE_UNUSED,
-+ int iscond ATTRIBUTE_UNUSED,
-+ rtx cond ATTRIBUTE_UNUSED, rtx r12_imm)
-+ {
-+
-+ unsigned long saved_reg_mask, saved_fp_reg_mask;
-+ int insert_ret = TRUE;
-+ int reglist8 = 0;
-+ int stack_adjustment = get_frame_size ();
-+ unsigned int func_type = avr32_current_func_type ();
-+ FILE *f = asm_out_file;
-+
-+ /* Naked functions does not have an epilogue */
-+ if (IS_NAKED (func_type))
-+ return;
-+
-+ saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+
-+ saved_reg_mask = avr32_compute_save_reg_mask (FALSE);
-+
-+ /* Reset frame pointer */
-+ if (stack_adjustment > 0)
-+ {
-+ if (avr32_const_ok_for_constraint_p (stack_adjustment, 'I', "Is21"))
-+ {
-+ fprintf (f, "\tsub\tsp, %i # Reset Frame Pointer\n",
-+ -stack_adjustment);
-+ }
-+ else
-+ {
-+ /* TODO! Is it safe to use r8 as scratch?? */
-+ fprintf (f, "\tmov\tr8, lo(%i) # Reset Frame Pointer\n",
-+ -stack_adjustment);
-+ fprintf (f, "\torh\tr8, hi(%i) # Reset Frame Pointer\n",
-+ -stack_adjustment);
-+ fprintf (f, "\tadd\tsp, r8 # Reset Frame Pointer\n");
-+ }
-+ }
-+
-+ if (saved_fp_reg_mask)
-+ {
-+ char reglist[64]; /* 64 bytes should be enough... */
-+ avr32_make_fp_reglist_w (saved_fp_reg_mask, (char *) reglist);
-+ fprintf (f, "\tldcm.w\tcp0, sp++, %s\n", reglist);
-+ if (saved_fp_reg_mask & ~0xff)
-+ {
-+ saved_fp_reg_mask &= ~0xff;
-+ avr32_make_fp_reglist_d (saved_fp_reg_mask, (char *) reglist);
-+ fprintf (f, "\tldcm.d\tcp0, sp++, %s\n", reglist);
-+ }
-+ }
-+
-+ if (saved_reg_mask)
-+ {
-+ /* Must pop used registers */
-+
-+ /* Should we use POPM or LDM? */
-+ int usePOPM = TRUE;
-+ if (((saved_reg_mask & (1 << 0)) ||
-+ (saved_reg_mask & (1 << 1)) ||
-+ (saved_reg_mask & (1 << 2)) || (saved_reg_mask & (1 << 3))))
-+ {
-+ /* One of R0-R3 should at least be popped */
-+ if (((saved_reg_mask & (1 << 0)) &&
-+ (saved_reg_mask & (1 << 1)) &&
-+ (saved_reg_mask & (1 << 2)) && (saved_reg_mask & (1 << 3))))
-+ {
-+ /* All should be popped */
-+ reglist8 |= 0x01;
-+ }
-+ else
-+ {
-+ usePOPM = FALSE;
-+ }
-+ }
-+
-+ if (((saved_reg_mask & (1 << 4)) ||
-+ (saved_reg_mask & (1 << 5)) ||
-+ (saved_reg_mask & (1 << 6)) || (saved_reg_mask & (1 << 7))))
-+ {
-+ /* One of R0-R3 should at least be popped */
-+ if (((saved_reg_mask & (1 << 4)) &&
-+ (saved_reg_mask & (1 << 5)) &&
-+ (saved_reg_mask & (1 << 6)) && (saved_reg_mask & (1 << 7))))
-+ {
-+ if (usePOPM)
-+ /* All should be popped */
-+ reglist8 |= 0x02;
-+ }
-+ else
-+ {
-+ usePOPM = FALSE;
-+ }
-+ }
-+
-+ if (((saved_reg_mask & (1 << 8)) || (saved_reg_mask & (1 << 9))))
-+ {
-+ /* One of R8-R9 should at least be pushed */
-+ if (((saved_reg_mask & (1 << 8)) && (saved_reg_mask & (1 << 9))))
-+ {
-+ if (usePOPM)
-+ /* All should be pushed */
-+ reglist8 |= 0x04;
-+ }
-+ else
-+ {
-+ usePOPM = FALSE;
-+ }
-+ }
-+
-+ if (saved_reg_mask & (1 << 10))
-+ reglist8 |= 0x08;
-+
-+ if (saved_reg_mask & (1 << 11))
-+ reglist8 |= 0x10;
-+
-+ if (saved_reg_mask & (1 << 12))
-+ reglist8 |= 0x20;
-+
-+ if (saved_reg_mask & (1 << ASM_REGNUM (LR_REGNUM)))
-+ /* Pop LR */
-+ reglist8 |= 0x40;
-+
-+ if (saved_reg_mask & (1 << ASM_REGNUM (PC_REGNUM)))
-+ /* Pop LR into PC. */
-+ reglist8 |= 0x80;
-+
-+ if (usePOPM)
-+ {
-+ char reglist[64]; /* 64 bytes should be enough... */
-+ avr32_make_reglist8 (reglist8, (char *) reglist);
-+
-+ if (reglist8 & 0x80)
-+ /* This instruction is also a return */
-+ insert_ret = FALSE;
-+
-+ if (r12_imm && !insert_ret)
-+ fprintf (f, "\tpopm\t%s, r12=%li\n", reglist, INTVAL (r12_imm));
-+ else
-+ fprintf (f, "\tpopm\t%s\n", reglist);
-+
-+ }
-+ else
-+ {
-+ char reglist[64]; /* 64 bytes should be enough... */
-+ avr32_make_reglist16 (saved_reg_mask, (char *) reglist);
-+ if (saved_reg_mask & (1 << ASM_REGNUM (PC_REGNUM)))
-+ /* This instruction is also a return */
-+ insert_ret = FALSE;
-+
-+ if (r12_imm && !insert_ret)
-+ fprintf (f, "\tldm\tsp++, %s, r12=%li\n", reglist,
-+ INTVAL (r12_imm));
-+ else
-+ fprintf (f, "\tldm\tsp++, %s\n", reglist);
-+
-+ }
-+
-+ }
-+
-+ /* Stack adjustment for exception handler. */
-+ if (current_function_calls_eh_return)
-+ fprintf (f, "\tadd\tsp, r%d\n", ASM_REGNUM (EH_RETURN_STACKADJ_REGNO));
-+
-+
-+ if (IS_INTERRUPT (func_type))
-+ {
-+ fprintf (f, "\trete\n");
-+ }
-+ else if (insert_ret)
-+ {
-+ if (r12_imm)
-+ fprintf (f, "\tretal\t%li\n", INTVAL (r12_imm));
-+ else
-+ fprintf (f, "\tretal\tr12\n");
-+ }
-+ }
-+
-+/* Function for converting a fp-register mask to a
-+ reglistCPD8 register list string. */
-+void
-+avr32_make_fp_reglist_d (int reglist_mask, char *reglist_string)
-+ {
-+ int i;
-+
-+ /* Make sure reglist_string is empty */
-+ reglist_string[0] = '\0';
-+
-+ for (i = 0; i < NUM_FP_REGS; i += 2)
-+ {
-+ if (reglist_mask & (1 << i))
-+ {
-+ strlen (reglist_string) ?
-+ sprintf (reglist_string, "%s, %s-%s", reglist_string,
-+ reg_names[INTERNAL_FP_REGNUM (i)],
-+ reg_names[INTERNAL_FP_REGNUM (i + 1)]) :
-+ sprintf (reglist_string, "%s-%s",
-+ reg_names[INTERNAL_FP_REGNUM (i)],
-+ reg_names[INTERNAL_FP_REGNUM (i + 1)]);
-+ }
-+ }
-+ }
-+
-+/* Function for converting a fp-register mask to a
-+ reglistCP8 register list string. */
-+void
-+avr32_make_fp_reglist_w (int reglist_mask, char *reglist_string)
-+ {
-+ int i;
-+
-+ /* Make sure reglist_string is empty */
-+ reglist_string[0] = '\0';
-+
-+ for (i = 0; i < NUM_FP_REGS; ++i)
-+ {
-+ if (reglist_mask & (1 << i))
-+ {
-+ strlen (reglist_string) ?
-+ sprintf (reglist_string, "%s, %s", reglist_string,
-+ reg_names[INTERNAL_FP_REGNUM (i)]) :
-+ sprintf (reglist_string, "%s", reg_names[INTERNAL_FP_REGNUM (i)]);
-+ }
-+ }
-+ }
-+
-+void
-+avr32_make_reglist16 (int reglist16_vect, char *reglist16_string)
-+ {
-+ int i;
-+
-+ /* Make sure reglist16_string is empty */
-+ reglist16_string[0] = '\0';
-+
-+ for (i = 0; i < 16; ++i)
-+ {
-+ if (reglist16_vect & (1 << i))
-+ {
-+ strlen (reglist16_string) ?
-+ sprintf (reglist16_string, "%s, %s", reglist16_string,
-+ reg_names[INTERNAL_REGNUM (i)]) :
-+ sprintf (reglist16_string, "%s", reg_names[INTERNAL_REGNUM (i)]);
-+ }
-+ }
-+ }
-+
-+int
-+avr32_convert_to_reglist16 (int reglist8_vect)
-+ {
-+ int reglist16_vect = 0;
-+ if (reglist8_vect & 0x1)
-+ reglist16_vect |= 0xF;
-+ if (reglist8_vect & 0x2)
-+ reglist16_vect |= 0xF0;
-+ if (reglist8_vect & 0x4)
-+ reglist16_vect |= 0x300;
-+ if (reglist8_vect & 0x8)
-+ reglist16_vect |= 0x400;
-+ if (reglist8_vect & 0x10)
-+ reglist16_vect |= 0x800;
-+ if (reglist8_vect & 0x20)
-+ reglist16_vect |= 0x1000;
-+ if (reglist8_vect & 0x40)
-+ reglist16_vect |= 0x4000;
-+ if (reglist8_vect & 0x80)
-+ reglist16_vect |= 0x8000;
-+
-+ return reglist16_vect;
-+ }
-+
-+void
-+avr32_make_reglist8 (int reglist8_vect, char *reglist8_string)
-+ {
-+ /* Make sure reglist8_string is empty */
-+ reglist8_string[0] = '\0';
-+
-+ if (reglist8_vect & 0x1)
-+ sprintf (reglist8_string, "r0-r3");
-+ if (reglist8_vect & 0x2)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r4-r7",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "r4-r7");
-+ if (reglist8_vect & 0x4)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r8-r9",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "r8-r9");
-+ if (reglist8_vect & 0x8)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r10",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "r10");
-+ if (reglist8_vect & 0x10)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r11",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "r11");
-+ if (reglist8_vect & 0x20)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r12",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "r12");
-+ if (reglist8_vect & 0x40)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, lr",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "lr");
-+ if (reglist8_vect & 0x80)
-+ strlen (reglist8_string) ? sprintf (reglist8_string, "%s, pc",
-+ reglist8_string) :
-+ sprintf (reglist8_string, "pc");
-+ }
-+
-+int
-+avr32_eh_return_data_regno (int n)
-+ {
-+ if (n >= 0 && n <= 3)
-+ return 8 + n;
-+ else
-+ return INVALID_REGNUM;
-+ }
-+
-+/* Compute the distance from register FROM to register TO.
-+ These can be the arg pointer, the frame pointer or
-+ the stack pointer.
-+ Typical stack layout looks like this:
-+
-+ old stack pointer -> | |
-+ ----
-+ | | \
-+ | | saved arguments for
-+ | | vararg functions
-+ arg_pointer -> | | /
-+ --
-+ | | \
-+ | | call saved
-+ | | registers
-+ | | /
-+ frame ptr -> --
-+ | | \
-+ | | local
-+ | | variables
-+ stack ptr --> | | /
-+ --
-+ | | \
-+ | | outgoing
-+ | | arguments
-+ | | /
-+ --
-+
-+ For a given funciton some or all of these stack compomnents
-+ may not be needed, giving rise to the possibility of
-+ eliminating some of the registers.
-+
-+ The values returned by this function must reflect the behaviour
-+ of avr32_expand_prologue() and avr32_compute_save_reg_mask().
-+
-+ The sign of the number returned reflects the direction of stack
-+ growth, so the values are positive for all eliminations except
-+ from the soft frame pointer to the hard frame pointer. */
-+
-+
-+int
-+avr32_initial_elimination_offset (int from, int to)
-+ {
-+ int i;
-+ int call_saved_regs = 0;
-+ unsigned long saved_reg_mask, saved_fp_reg_mask;
-+ unsigned int local_vars = get_frame_size ();
-+
-+ saved_reg_mask = avr32_compute_save_reg_mask (TRUE);
-+ saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+
-+ for (i = 0; i < 16; ++i)
-+ {
-+ if (saved_reg_mask & (1 << i))
-+ call_saved_regs += 4;
-+ }
-+
-+ for (i = 0; i < NUM_FP_REGS; ++i)
-+ {
-+ if (saved_fp_reg_mask & (1 << i))
-+ call_saved_regs += 4;
-+ }
-+
-+ switch (from)
-+ {
-+ case ARG_POINTER_REGNUM:
-+ switch (to)
-+ {
-+ case STACK_POINTER_REGNUM:
-+ return call_saved_regs + local_vars;
-+ case FRAME_POINTER_REGNUM:
-+ return call_saved_regs;
-+ default:
-+ abort ();
-+ }
-+ case FRAME_POINTER_REGNUM:
-+ switch (to)
-+ {
-+ case STACK_POINTER_REGNUM:
-+ return local_vars;
-+ default:
-+ abort ();
-+ }
-+ default:
-+ abort ();
-+ }
-+ }
-+
-+
-+/*
-+ Returns a rtx used when passing the next argument to a function.
-+ avr32_init_cumulative_args() and avr32_function_arg_advance() sets witch
-+ register to use.
-+ */
-+rtx
-+avr32_function_arg (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+ tree type, int named)
-+ {
-+ int index = -1;
-+
-+ HOST_WIDE_INT arg_size, arg_rsize;
-+ if (type)
-+ {
-+ arg_size = int_size_in_bytes (type);
-+ }
-+ else
-+ {
-+ arg_size = GET_MODE_SIZE (mode);
-+ }
-+ arg_rsize = PUSH_ROUNDING (arg_size);
-+
-+ /*
-+ The last time this macro is called, it is called with mode == VOIDmode,
-+ and its result is passed to the call or call_value pattern as operands 2
-+ and 3 respectively. */
-+ if (mode == VOIDmode)
-+ {
-+ return gen_rtx_CONST_INT (SImode, 22); /* ToDo: fixme. */
-+ }
-+
-+ if ((*targetm.calls.must_pass_in_stack) (mode, type) || !named)
-+ {
-+ return NULL_RTX;
-+ }
-+
-+ if (arg_rsize == 8)
-+ {
-+ /* use r11:r10 or r9:r8. */
-+ if (!(GET_USED_INDEX (cum, 1) || GET_USED_INDEX (cum, 2)))
-+ index = 1;
-+ else if (!(GET_USED_INDEX (cum, 3) || GET_USED_INDEX (cum, 4)))
-+ index = 3;
-+ else
-+ index = -1;
-+ }
-+ else if (arg_rsize == 4)
-+ { /* Use first available register */
-+ index = 0;
-+ while (index <= LAST_CUM_REG_INDEX && GET_USED_INDEX (cum, index))
-+ index++;
-+ if (index > LAST_CUM_REG_INDEX)
-+ index = -1;
-+ }
-+
-+ SET_REG_INDEX (cum, index);
-+
-+ if (GET_REG_INDEX (cum) >= 0)
-+ return gen_rtx_REG (mode,
-+ avr32_function_arg_reglist[GET_REG_INDEX (cum)]);
-+
-+ return NULL_RTX;
-+ }
-+
-+/*
-+ Set the register used for passing the first argument to a function.
-+ */
-+void
-+avr32_init_cumulative_args (CUMULATIVE_ARGS * cum, tree fntype,
-+ rtx libname ATTRIBUTE_UNUSED,
-+ tree fndecl ATTRIBUTE_UNUSED)
-+ {
-+ /* Set all registers as unused. */
-+ SET_INDEXES_UNUSED (cum);
-+
-+ /* Reset uses_anonymous_args */
-+ cum->uses_anonymous_args = 0;
-+
-+ /* Reset size of stack pushed arguments */
-+ cum->stack_pushed_args_size = 0;
-+ }
-+
-+/*
-+ Set register used for passing the next argument to a function. Only the
-+ Scratch Registers are used.
-+
-+ number name
-+ 15 r15 PC
-+ 14 r14 LR
-+ 13 r13 _SP_________
-+ FIRST_CUM_REG 12 r12 _||_
-+ 10 r11 ||
-+ 11 r10 _||_ Scratch Registers
-+ 8 r9 ||
-+ LAST_SCRATCH_REG 9 r8 _\/_________
-+ 6 r7 /\
-+ 7 r6 ||
-+ 4 r5 ||
-+ 5 r4 ||
-+ 2 r3 ||
-+ 3 r2 ||
-+ 0 r1 ||
-+ 1 r0 _||_________
-+
-+ */
-+void
-+avr32_function_arg_advance (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+ tree type, int named ATTRIBUTE_UNUSED)
-+ {
-+ HOST_WIDE_INT arg_size, arg_rsize;
-+
-+ if (type)
-+ {
-+ arg_size = int_size_in_bytes (type);
-+ }
-+ else
-+ {
-+ arg_size = GET_MODE_SIZE (mode);
-+ }
-+ arg_rsize = PUSH_ROUNDING (arg_size);
-+
-+ /* It the argument had to be passed in stack, no register is used. */
-+ if ((*targetm.calls.must_pass_in_stack) (mode, type))
-+ {
-+ cum->stack_pushed_args_size += PUSH_ROUNDING (int_size_in_bytes (type));
-+ return;
-+ }
-+
-+ /* Mark the used registers as "used". */
-+ if (GET_REG_INDEX (cum) >= 0)
-+ {
-+ SET_USED_INDEX (cum, GET_REG_INDEX (cum));
-+ if (arg_rsize == 8)
-+ {
-+ SET_USED_INDEX (cum, (GET_REG_INDEX (cum) + 1));
-+ }
-+ }
-+ else
-+ {
-+ /* Had to use stack */
-+ cum->stack_pushed_args_size += arg_rsize;
-+ }
-+ }
-+
-+/*
-+ Defines witch direction to go to find the next register to use if the
-+ argument is larger then one register or for arguments shorter than an
-+ int which is not promoted, such as the last part of structures with
-+ size not a multiple of 4. */
-+enum direction
-+avr32_function_arg_padding (enum machine_mode mode ATTRIBUTE_UNUSED,
-+ tree type)
-+ {
-+ /* Pad upward for all aggregates except byte and halfword sized aggregates
-+ which can be passed in registers. */
-+ if (type
-+ && AGGREGATE_TYPE_P (type)
-+ && (int_size_in_bytes (type) != 1)
-+ && !((int_size_in_bytes (type) == 2)
-+ && TYPE_ALIGN_UNIT (type) >= 2)
-+ && (int_size_in_bytes (type) & 0x3))
-+ {
-+ return upward;
-+ }
-+
-+ return downward;
-+ }
-+
-+/*
-+ Return a rtx used for the return value from a function call.
-+ */
-+rtx
-+avr32_function_value (tree type, tree func, bool outgoing ATTRIBUTE_UNUSED)
-+ {
-+ if (avr32_return_in_memory (type, func))
-+ return NULL_RTX;
-+
-+ if (int_size_in_bytes (type) <= 4)
-+ if (avr32_return_in_msb (type))
-+ /* Aggregates of size less than a word which does align the data in the
-+ MSB must use SImode for r12. */
-+ return gen_rtx_REG (SImode, RET_REGISTER);
-+ else
-+ return gen_rtx_REG (TYPE_MODE (type), RET_REGISTER);
-+ else if (int_size_in_bytes (type) <= 8)
-+ return gen_rtx_REG (TYPE_MODE (type), INTERNAL_REGNUM (11));
-+
-+ return NULL_RTX;
-+ }
-+
-+/*
-+ Return a rtx used for the return value from a library function call.
-+ */
-+rtx
-+avr32_libcall_value (enum machine_mode mode)
-+ {
-+
-+ if (GET_MODE_SIZE (mode) <= 4)
-+ return gen_rtx_REG (mode, RET_REGISTER);
-+ else if (GET_MODE_SIZE (mode) <= 8)
-+ return gen_rtx_REG (mode, INTERNAL_REGNUM (11));
-+ else
-+ return NULL_RTX;
-+ }
-+
-+/* Return TRUE if X references a SYMBOL_REF. */
-+int
-+symbol_mentioned_p (rtx x)
-+ {
-+ const char *fmt;
-+ int i;
-+
-+ if (GET_CODE (x) == SYMBOL_REF)
-+ return 1;
-+
-+ fmt = GET_RTX_FORMAT (GET_CODE (x));
-+
-+ for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
-+ {
-+ if (fmt[i] == 'E')
-+ {
-+ int j;
-+
-+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
-+ if (symbol_mentioned_p (XVECEXP (x, i, j)))
-+ return 1;
-+ }
-+ else if (fmt[i] == 'e' && symbol_mentioned_p (XEXP (x, i)))
-+ return 1;
-+ }
-+
-+ return 0;
-+ }
-+
-+/* Return TRUE if X references a LABEL_REF. */
-+int
-+label_mentioned_p (rtx x)
-+ {
-+ const char *fmt;
-+ int i;
-+
-+ if (GET_CODE (x) == LABEL_REF)
-+ return 1;
-+
-+ fmt = GET_RTX_FORMAT (GET_CODE (x));
-+ for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
-+ {
-+ if (fmt[i] == 'E')
-+ {
-+ int j;
-+
-+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
-+ if (label_mentioned_p (XVECEXP (x, i, j)))
-+ return 1;
-+ }
-+ else if (fmt[i] == 'e' && label_mentioned_p (XEXP (x, i)))
-+ return 1;
-+ }
-+
-+ return 0;
-+ }
-+
-+
-+int
-+avr32_legitimate_pic_operand_p (rtx x)
-+ {
-+
-+ /* We can't have const, this must be broken down to a symbol. */
-+ if (GET_CODE (x) == CONST)
-+ return FALSE;
-+
-+ /* Can't access symbols or labels via the constant pool either */
-+ if ((GET_CODE (x) == SYMBOL_REF
-+ && CONSTANT_POOL_ADDRESS_P (x)
-+ && (symbol_mentioned_p (get_pool_constant (x))
-+ || label_mentioned_p (get_pool_constant (x)))))
-+ return FALSE;
-+
-+ return TRUE;
-+ }
-+
-+
-+rtx
-+legitimize_pic_address (rtx orig, enum machine_mode mode ATTRIBUTE_UNUSED,
-+ rtx reg)
-+ {
-+
-+ if (GET_CODE (orig) == SYMBOL_REF || GET_CODE (orig) == LABEL_REF)
-+ {
-+ int subregs = 0;
-+
-+ if (reg == 0)
-+ {
-+ if (no_new_pseudos)
-+ abort ();
-+ else
-+ reg = gen_reg_rtx (Pmode);
-+
-+ subregs = 1;
-+ }
-+
-+ emit_move_insn (reg, orig);
-+
-+ /* Only set current function as using pic offset table if flag_pic is
-+ set. This is because this function is also used if
-+ TARGET_HAS_ASM_ADDR_PSEUDOS is set. */
-+ if (flag_pic)
-+ current_function_uses_pic_offset_table = 1;
-+
-+ /* Put a REG_EQUAL note on this insn, so that it can be optimized by
-+ loop. */
-+ return reg;
-+ }
-+ else if (GET_CODE (orig) == CONST)
-+ {
-+ rtx base, offset;
-+
-+ if (flag_pic
-+ && GET_CODE (XEXP (orig, 0)) == PLUS
-+ && XEXP (XEXP (orig, 0), 0) == pic_offset_table_rtx)
-+ return orig;
-+
-+ if (reg == 0)
-+ {
-+ if (no_new_pseudos)
-+ abort ();
-+ else
-+ reg = gen_reg_rtx (Pmode);
-+ }
-+
-+ if (GET_CODE (XEXP (orig, 0)) == PLUS)
-+ {
-+ base =
-+ legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg);
-+ offset =
-+ legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode,
-+ base == reg ? 0 : reg);
-+ }
-+ else
-+ abort ();
-+
-+ if (GET_CODE (offset) == CONST_INT)
-+ {
-+ /* The base register doesn't really matter, we only want to test
-+ the index for the appropriate mode. */
-+ if (!avr32_const_ok_for_constraint_p (INTVAL (offset), 'I', "Is21"))
-+ {
-+ if (!no_new_pseudos)
-+ offset = force_reg (Pmode, offset);
-+ else
-+ abort ();
-+ }
-+
-+ if (GET_CODE (offset) == CONST_INT)
-+ return plus_constant (base, INTVAL (offset));
-+ }
-+
-+ return gen_rtx_PLUS (Pmode, base, offset);
-+ }
-+
-+ return orig;
-+ }
-+
-+/* Generate code to load the PIC register. */
-+void
-+avr32_load_pic_register (void)
-+ {
-+ rtx l1, pic_tmp;
-+ rtx global_offset_table;
-+
-+ if ((current_function_uses_pic_offset_table == 0) || TARGET_NO_INIT_GOT)
-+ return;
-+
-+ if (!flag_pic)
-+ abort ();
-+
-+ l1 = gen_label_rtx ();
-+
-+ global_offset_table = gen_rtx_SYMBOL_REF (Pmode, "_GLOBAL_OFFSET_TABLE_");
-+ pic_tmp =
-+ gen_rtx_CONST (Pmode,
-+ gen_rtx_MINUS (SImode, gen_rtx_LABEL_REF (Pmode, l1),
-+ global_offset_table));
-+ emit_insn (gen_pic_load_addr
-+ (pic_offset_table_rtx, force_const_mem (SImode, pic_tmp)));
-+ emit_insn (gen_pic_compute_got_from_pc (pic_offset_table_rtx, l1));
-+
-+ /* Need to emit this whether or not we obey regdecls, since setjmp/longjmp
-+ can cause life info to screw up. */
-+ emit_insn (gen_rtx_USE (VOIDmode, pic_offset_table_rtx));
-+ }
-+
-+
-+
-+/* This hook should return true if values of type type are returned at the most
-+ significant end of a register (in other words, if they are padded at the
-+ least significant end). You can assume that type is returned in a register;
-+ the caller is required to check this. Note that the register provided by
-+ FUNCTION_VALUE must be able to hold the complete return value. For example,
-+ if a 1-, 2- or 3-byte structure is returned at the most significant end of a
-+ 4-byte register, FUNCTION_VALUE should provide an SImode rtx. */
-+bool
-+avr32_return_in_msb (tree type ATTRIBUTE_UNUSED)
-+ {
-+ /* if ( AGGREGATE_TYPE_P (type) ) if ((int_size_in_bytes(type) == 1) ||
-+ ((int_size_in_bytes(type) == 2) && TYPE_ALIGN_UNIT(type) >= 2)) return
-+ false; else return true; */
-+
-+ return false;
-+ }
-+
-+
-+/*
-+ Returns one if a certain function value is going to be returned in memory
-+ and zero if it is going to be returned in a register.
-+
-+ BLKmode and all other modes that is larger than 64 bits are returned in
-+ memory.
-+ */
-+bool
-+avr32_return_in_memory (tree type, tree fntype ATTRIBUTE_UNUSED)
-+ {
-+ if (TYPE_MODE (type) == VOIDmode)
-+ return false;
-+
-+ if (int_size_in_bytes (type) > (2 * UNITS_PER_WORD)
-+ || int_size_in_bytes (type) == -1)
-+ {
-+ return true;
-+ }
-+
-+ /* If we have an aggregate then use the same mechanism as when checking if
-+ it should be passed on the stack. */
-+ if (type
-+ && AGGREGATE_TYPE_P (type)
-+ && (*targetm.calls.must_pass_in_stack) (TYPE_MODE (type), type))
-+ return true;
-+
-+ return false;
-+ }
-+
-+
-+/* Output the constant part of the trampoline.
-+ lddpc r0, pc[0x8:e] ; load static chain register
-+ lddpc pc, pc[0x8:e] ; jump to subrutine
-+ .long 0 ; Address to static chain,
-+ ; filled in by avr32_initialize_trampoline()
-+ .long 0 ; Address to subrutine,
-+ ; filled in by avr32_initialize_trampoline()
-+ */
-+void
-+avr32_trampoline_template (FILE * file)
-+ {
-+ fprintf (file, "\tlddpc r0, pc[8]\n");
-+ fprintf (file, "\tlddpc pc, pc[8]\n");
-+ /* make room for the address of the static chain. */
-+ fprintf (file, "\t.long\t0\n");
-+ /* make room for the address to the subrutine. */
-+ fprintf (file, "\t.long\t0\n");
-+ }
-+
-+
-+/*
-+ Initialize the variable parts of a trampoline.
-+ */
-+void
-+avr32_initialize_trampoline (rtx addr, rtx fnaddr, rtx static_chain)
-+ {
-+ /* Store the address to the static chain. */
-+ emit_move_insn (gen_rtx_MEM
-+ (SImode, plus_constant (addr, TRAMPOLINE_SIZE - 4)),
-+ static_chain);
-+
-+ /* Store the address to the function. */
-+ emit_move_insn (gen_rtx_MEM (SImode, plus_constant (addr, TRAMPOLINE_SIZE)),
-+ fnaddr);
-+
-+ emit_insn (gen_cache (gen_rtx_REG (SImode, 13),
-+ gen_rtx_CONST_INT (SImode,
-+ AVR32_CACHE_INVALIDATE_ICACHE)));
-+ }
-+
-+/* Return nonzero if X is valid as an addressing register. */
-+int
-+avr32_address_register_rtx_p (rtx x, int strict_p)
-+ {
-+ int regno;
-+
-+ if (!register_operand(x, GET_MODE(x)))
-+ return 0;
-+
-+ /* If strict we require the register to be a hard register. */
-+ if (strict_p
-+ && !REG_P(x))
-+ return 0;
-+
-+ regno = REGNO (x);
-+
-+ if (strict_p)
-+ return REGNO_OK_FOR_BASE_P (regno);
-+
-+ return (regno <= LAST_REGNUM || regno >= FIRST_PSEUDO_REGISTER);
-+ }
-+
-+/* Return nonzero if INDEX is valid for an address index operand. */
-+int
-+avr32_legitimate_index_p (enum machine_mode mode, rtx index, int strict_p)
-+ {
-+ enum rtx_code code = GET_CODE (index);
-+
-+ if (GET_MODE_SIZE (mode) > 8)
-+ return 0;
-+
-+ /* Standard coprocessor addressing modes. */
-+ if (code == CONST_INT)
-+ {
-+ if (TARGET_HARD_FLOAT && GET_MODE_CLASS (mode) == MODE_FLOAT)
-+ /* Coprocessor mem insns has a smaller reach than ordinary mem insns */
-+ return CONST_OK_FOR_CONSTRAINT_P (INTVAL (index), 'K', "Ku14");
-+ else
-+ return CONST_OK_FOR_CONSTRAINT_P (INTVAL (index), 'K', "Ks16");
-+ }
-+
-+ if (avr32_address_register_rtx_p (index, strict_p))
-+ return 1;
-+
-+ if (code == MULT)
-+ {
-+ rtx xiop0 = XEXP (index, 0);
-+ rtx xiop1 = XEXP (index, 1);
-+ return ((avr32_address_register_rtx_p (xiop0, strict_p)
-+ && power_of_two_operand (xiop1, SImode)
-+ && (INTVAL (xiop1) <= 8))
-+ || (avr32_address_register_rtx_p (xiop1, strict_p)
-+ && power_of_two_operand (xiop0, SImode)
-+ && (INTVAL (xiop0) <= 8)));
-+ }
-+ else if (code == ASHIFT)
-+ {
-+ rtx op = XEXP (index, 1);
-+
-+ return (avr32_address_register_rtx_p (XEXP (index, 0), strict_p)
-+ && GET_CODE (op) == CONST_INT
-+ && INTVAL (op) > 0 && INTVAL (op) <= 3);
-+ }
-+
-+ return 0;
-+ }
-+
-+/*
-+ Used in the GO_IF_LEGITIMATE_ADDRESS macro. Returns a nonzero value if
-+ the RTX x is a legitimate memory address.
-+
-+ Returns NO_REGS if the address is not legatime, GENERAL_REGS or ALL_REGS
-+ if it is.
-+ */
-+
-+/* Forward declaration*/
-+int is_minipool_label (rtx label);
-+
-+int
-+avr32_legitimate_address (enum machine_mode mode, rtx x, int strict)
-+ {
-+
-+ switch (GET_CODE (x))
-+ {
-+ case REG:
-+ return avr32_address_register_rtx_p (x, strict);
-+ case CONST:
-+ {
-+ rtx label = avr32_find_symbol (x);
-+ if (label
-+ &&
-+ ((CONSTANT_POOL_ADDRESS_P (label)
-+ && !(flag_pic
-+ && (symbol_mentioned_p (get_pool_constant (label))
-+ || label_mentioned_p (get_pool_constant (label)))))
-+ /* TODO! Can this ever happen??? */
-+ || ((GET_CODE (label) == LABEL_REF)
-+ && GET_CODE (XEXP (label, 0)) == CODE_LABEL
-+ && is_minipool_label (XEXP (label, 0)))))
-+ {
-+ return TRUE;
-+ }
-+ }
-+ break;
-+ case LABEL_REF:
-+ if (GET_CODE (XEXP (x, 0)) == CODE_LABEL
-+ && is_minipool_label (XEXP (x, 0)))
-+ {
-+ return TRUE;
-+ }
-+ break;
-+ case SYMBOL_REF:
-+ {
-+ if (CONSTANT_POOL_ADDRESS_P (x)
-+ && !(flag_pic
-+ && (symbol_mentioned_p (get_pool_constant (x))
-+ || label_mentioned_p (get_pool_constant (x)))))
-+ return TRUE;
-+ /*
-+ A symbol_ref is only legal if it is a function. If all of them are
-+ legal, a pseudo reg that is a constant will be replaced by a
-+ symbol_ref and make illegale code. SYMBOL_REF_FLAG is set by
-+ ENCODE_SECTION_INFO. */
-+ else if (SYMBOL_REF_RCALL_FUNCTION_P (x))
-+ return TRUE;
-+ break;
-+ }
-+ case PRE_DEC: /* (pre_dec (...)) */
-+ case POST_INC: /* (post_inc (...)) */
-+ return avr32_address_register_rtx_p (XEXP (x, 0), strict);
-+ case PLUS: /* (plus (...) (...)) */
-+ {
-+ rtx xop0 = XEXP (x, 0);
-+ rtx xop1 = XEXP (x, 1);
-+
-+ return ((avr32_address_register_rtx_p (xop0, strict)
-+ && avr32_legitimate_index_p (mode, xop1, strict))
-+ || (avr32_address_register_rtx_p (xop1, strict)
-+ && avr32_legitimate_index_p (mode, xop0, strict)));
-+ }
-+ default:
-+ break;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+
-+int
-+avr32_const_double_immediate (rtx value)
-+ {
-+ HOST_WIDE_INT hi, lo;
-+
-+ if (GET_CODE (value) != CONST_DOUBLE)
-+ return FALSE;
-+
-+ if (SCALAR_FLOAT_MODE_P (GET_MODE (value)))
-+ {
-+ HOST_WIDE_INT target_float[2];
-+ hi = lo = 0;
-+ real_to_target (target_float, CONST_DOUBLE_REAL_VALUE (value),
-+ GET_MODE (value));
-+ lo = target_float[0];
-+ hi = target_float[1];
-+ }
-+ else
-+ {
-+ hi = CONST_DOUBLE_HIGH (value);
-+ lo = CONST_DOUBLE_LOW (value);
-+ }
-+
-+ if (avr32_const_ok_for_constraint_p (lo, 'K', "Ks21")
-+ && (GET_MODE (value) == SFmode
-+ || avr32_const_ok_for_constraint_p (hi, 'K', "Ks21")))
-+ {
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+
-+int
-+avr32_legitimate_constant_p (rtx x)
-+ {
-+ switch (GET_CODE (x))
-+ {
-+ case CONST_INT:
-+ /* Check if we should put large immediate into constant pool
-+ or load them directly with mov/orh.*/
-+ if (!avr32_imm_in_const_pool)
-+ return 1;
-+
-+ return avr32_const_ok_for_constraint_p (INTVAL (x), 'K', "Ks21");
-+ case CONST_DOUBLE:
-+ /* Check if we should put large immediate into constant pool
-+ or load them directly with mov/orh.*/
-+ if (!avr32_imm_in_const_pool)
-+ return 1;
-+
-+ if (GET_MODE (x) == SFmode
-+ || GET_MODE (x) == DFmode || GET_MODE (x) == DImode)
-+ return avr32_const_double_immediate (x);
-+ else
-+ return 0;
-+ case LABEL_REF:
-+ return flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS;
-+ case SYMBOL_REF:
-+ return flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS;
-+ case CONST:
-+ case HIGH:
-+ case CONST_VECTOR:
-+ return 0;
-+ default:
-+ printf ("%s():\n", __FUNCTION__);
-+ debug_rtx (x);
-+ return 1;
-+ }
-+ }
-+
-+
-+/* Strip any special encoding from labels */
-+const char *
-+avr32_strip_name_encoding (const char *name)
-+{
-+ const char *stripped = name;
-+
-+ while (1)
-+ {
-+ switch (stripped[0])
-+ {
-+ case '#':
-+ stripped = strchr (name + 1, '#') + 1;
-+ break;
-+ case '*':
-+ stripped = &stripped[1];
-+ break;
-+ default:
-+ return stripped;
-+ }
-+ }
-+}
-+
-+
-+
-+/* Do anything needed before RTL is emitted for each function. */
-+static struct machine_function *
-+avr32_init_machine_status (void)
-+{
-+ struct machine_function *machine;
-+ machine =
-+ (machine_function *) ggc_alloc_cleared (sizeof (machine_function));
-+
-+#if AVR32_FT_UNKNOWN != 0
-+ machine->func_type = AVR32_FT_UNKNOWN;
-+#endif
-+
-+ machine->minipool_label_head = 0;
-+ machine->minipool_label_tail = 0;
-+ return machine;
-+}
-+
-+void
-+avr32_init_expanders (void)
-+ {
-+ /* Arrange to initialize and mark the machine per-function status. */
-+ init_machine_status = avr32_init_machine_status;
-+ }
-+
-+
-+/* Return an RTX indicating where the return address to the
-+ calling function can be found. */
-+
-+rtx
-+avr32_return_addr (int count, rtx frame ATTRIBUTE_UNUSED)
-+ {
-+ if (count != 0)
-+ return NULL_RTX;
-+
-+ return get_hard_reg_initial_val (Pmode, LR_REGNUM);
-+ }
-+
-+
-+void
-+avr32_encode_section_info (tree decl, rtx rtl, int first)
-+ {
-+
-+ if (first && DECL_P (decl))
-+ {
-+ /* Set SYMBOL_REG_FLAG for local functions */
-+ if (!TREE_PUBLIC (decl) && TREE_CODE (decl) == FUNCTION_DECL)
-+ {
-+ if ((*targetm.binds_local_p) (decl))
-+ {
-+ SYMBOL_REF_FLAG (XEXP (rtl, 0)) = 1;
-+ }
-+ }
-+ }
-+ }
-+
-+
-+void
-+avr32_asm_output_ascii (FILE * stream, char *ptr, int len)
-+ {
-+ int i, i_new = 0;
-+ char *new_ptr = xmalloc (4 * len);
-+ if (new_ptr == NULL)
-+ internal_error ("Out of memory.");
-+
-+ for (i = 0; i < len; i++)
-+ {
-+ if (ptr[i] == '\n')
-+ {
-+ new_ptr[i_new++] = '\\';
-+ new_ptr[i_new++] = '0';
-+ new_ptr[i_new++] = '1';
-+ new_ptr[i_new++] = '2';
-+ }
-+ else if (ptr[i] == '\"')
-+ {
-+ new_ptr[i_new++] = '\\';
-+ new_ptr[i_new++] = '\"';
-+ }
-+ else if (ptr[i] == '\\')
-+ {
-+ new_ptr[i_new++] = '\\';
-+ new_ptr[i_new++] = '\\';
-+ }
-+ else if (ptr[i] == '\0' && i + 1 < len)
-+ {
-+ new_ptr[i_new++] = '\\';
-+ new_ptr[i_new++] = '0';
-+ }
-+ else
-+ {
-+ new_ptr[i_new++] = ptr[i];
-+ }
-+ }
-+
-+ /* Terminate new_ptr. */
-+ new_ptr[i_new] = '\0';
-+ fprintf (stream, "\t.ascii\t\"%s\"\n", new_ptr);
-+ free (new_ptr);
-+ }
-+
-+
-+void
-+avr32_asm_output_label (FILE * stream, const char *name)
-+ {
-+ name = avr32_strip_name_encoding (name);
-+
-+ /* Print the label. */
-+ assemble_name (stream, name);
-+ fprintf (stream, ":\n");
-+ }
-+
-+
-+
-+void
-+avr32_asm_weaken_label (FILE * stream, const char *name)
-+ {
-+ fprintf (stream, "\t.weak ");
-+ assemble_name (stream, name);
-+ fprintf (stream, "\n");
-+ }
-+
-+/*
-+ Checks if a labelref is equal to a reserved word in the assembler. If it is,
-+ insert a '_' before the label name.
-+ */
-+void
-+avr32_asm_output_labelref (FILE * stream, const char *name)
-+ {
-+ int verbatim = FALSE;
-+ const char *stripped = name;
-+ int strip_finished = FALSE;
-+
-+ while (!strip_finished)
-+ {
-+ switch (stripped[0])
-+ {
-+ case '#':
-+ stripped = strchr (name + 1, '#') + 1;
-+ break;
-+ case '*':
-+ stripped = &stripped[1];
-+ verbatim = TRUE;
-+ break;
-+ default:
-+ strip_finished = TRUE;
-+ break;
-+ }
-+ }
-+
-+ if (verbatim)
-+ fputs (stripped, stream);
-+ else
-+ asm_fprintf (stream, "%U%s", stripped);
-+ }
-+
-+
-+
-+/*
-+ Check if the comparison in compare_exp is redundant
-+ for the condition given in next_cond given that the
-+ needed flags are already set by an earlier instruction.
-+ Uses cc_prev_status to check this.
-+
-+ Returns NULL_RTX if the compare is not redundant
-+ or the new condition to use in the conditional
-+ instruction if the compare is redundant.
-+ */
-+static rtx
-+is_compare_redundant (rtx compare_exp, rtx next_cond)
-+ {
-+ int z_flag_valid = FALSE;
-+ int n_flag_valid = FALSE;
-+ rtx new_cond;
-+
-+ if (GET_CODE (compare_exp) != COMPARE)
-+ return NULL_RTX;
-+
-+
-+ if (rtx_equal_p (cc_prev_status.mdep.value, compare_exp))
-+ {
-+ /* cc0 already contains the correct comparison -> delete cmp insn */
-+ return next_cond;
-+ }
-+
-+ if (GET_MODE (compare_exp) != SImode)
-+ return NULL_RTX;
-+
-+ switch (cc_prev_status.mdep.flags)
-+ {
-+ case CC_SET_VNCZ:
-+ case CC_SET_NCZ:
-+ n_flag_valid = TRUE;
-+ case CC_SET_CZ:
-+ case CC_SET_Z:
-+ z_flag_valid = TRUE;
-+ }
-+
-+ if (cc_prev_status.mdep.value
-+ && REG_P (XEXP (compare_exp, 0))
-+ && REGNO (XEXP (compare_exp, 0)) == REGNO (cc_prev_status.mdep.value)
-+ && GET_CODE (XEXP (compare_exp, 1)) == CONST_INT
-+ && next_cond != NULL_RTX)
-+ {
-+ if (INTVAL (XEXP (compare_exp, 1)) == 0
-+ && z_flag_valid
-+ && (GET_CODE (next_cond) == EQ || GET_CODE (next_cond) == NE))
-+ /* We can skip comparison Z flag is already reflecting ops[0] */
-+ return next_cond;
-+ else if (n_flag_valid
-+ && ((INTVAL (XEXP (compare_exp, 1)) == 0
-+ && (GET_CODE (next_cond) == GE
-+ || GET_CODE (next_cond) == LT))
-+ || (INTVAL (XEXP (compare_exp, 1)) == -1
-+ && (GET_CODE (next_cond) == GT
-+ || GET_CODE (next_cond) == LE))))
-+ {
-+ /* We can skip comparison N flag is already reflecting ops[0],
-+ which means that we can use the mi/pl conditions to check if
-+ ops[0] is GE or LT 0. */
-+ if ((GET_CODE (next_cond) == GE) || (GET_CODE (next_cond) == GT))
-+ new_cond =
-+ gen_rtx_UNSPEC (GET_MODE (next_cond), gen_rtvec (2, cc0_rtx, const0_rtx),
-+ UNSPEC_COND_PL);
-+ else
-+ new_cond =
-+ gen_rtx_UNSPEC (GET_MODE (next_cond), gen_rtvec (2, cc0_rtx, const0_rtx),
-+ UNSPEC_COND_MI);
-+ return new_cond;
-+ }
-+ }
-+ return NULL_RTX;
-+ }
-+
-+/* Updates cc_status. */
-+void
-+avr32_notice_update_cc (rtx exp, rtx insn)
-+ {
-+ switch (get_attr_cc (insn))
-+ {
-+ case CC_CALL_SET:
-+ CC_STATUS_INIT;
-+ FPCC_STATUS_INIT;
-+ /* Check if the function call returns a value in r12 */
-+ if (REG_P (recog_data.operand[0])
-+ && REGNO (recog_data.operand[0]) == RETVAL_REGNUM)
-+ {
-+ cc_status.flags = 0;
-+ cc_status.mdep.value =
-+ gen_rtx_COMPARE (SImode, recog_data.operand[0], const0_rtx);
-+ cc_status.mdep.flags = CC_SET_VNCZ;
-+
-+ }
-+ break;
-+ case CC_COMPARE:
-+ /* Check that compare will not be optimized away if so nothing should
-+ be done */
-+ if (is_compare_redundant (SET_SRC (exp), get_next_insn_cond (insn)) ==
-+ NULL_RTX)
-+ {
-+
-+ /* Reset the nonstandard flag */
-+ CC_STATUS_INIT;
-+ cc_status.flags = 0;
-+ cc_status.mdep.value = SET_SRC (exp);
-+ cc_status.mdep.flags = CC_SET_VNCZ;
-+ }
-+ break;
-+ case CC_CMP_COND_INSN:
-+ {
-+ /* Conditional insn that emit the compare itself. */
-+ rtx cmp = gen_rtx_COMPARE (GET_MODE (recog_data.operand[4]),
-+ recog_data.operand[4],
-+ recog_data.operand[5]);
-+
-+ if (is_compare_redundant (cmp, recog_data.operand[1]) == NULL_RTX)
-+ {
-+
-+ /* Reset the nonstandard flag */
-+ CC_STATUS_INIT;
-+ cc_status.flags = 0;
-+ cc_status.mdep.value = cmp;
-+ cc_status.mdep.flags = CC_SET_VNCZ;
-+ }
-+ }
-+ break;
-+ case CC_FPCOMPARE:
-+ /* Check that floating-point compare will not be optimized away if so
-+ nothing should be done */
-+ if (!rtx_equal_p (cc_prev_status.mdep.fpvalue, SET_SRC (exp)))
-+ {
-+ /* cc0 already contains the correct comparison -> delete cmp insn */
-+ /* Reset the nonstandard flag */
-+ cc_status.mdep.fpvalue = SET_SRC (exp);
-+ cc_status.mdep.fpflags = CC_SET_CZ;
-+ }
-+ break;
-+ case CC_FROM_FPCC:
-+ /* Flags are updated with flags from Floating-point coprocessor, set
-+ CC_NOT_SIGNED flag since the flags are set so that unsigned
-+ condidion codes can be used directly. */
-+ CC_STATUS_INIT;
-+ cc_status.flags = CC_NOT_SIGNED;
-+ cc_status.mdep.value = cc_status.mdep.fpvalue;
-+ cc_status.mdep.flags = cc_status.mdep.fpflags;
-+ break;
-+ case CC_BLD:
-+ /* Bit load is kind of like an inverted testsi, because the Z flag is
-+ inverted */
-+ CC_STATUS_INIT;
-+ cc_status.flags = CC_INVERTED;
-+ cc_status.mdep.value = SET_SRC (exp);
-+ cc_status.mdep.flags = CC_SET_Z;
-+ break;
-+ case CC_NONE:
-+ /* Insn does not affect CC at all. Check if the instruction updates
-+ some of the register currently reflected in cc0 */
-+
-+ if ((GET_CODE (exp) == SET)
-+ && (cc_status.value1 || cc_status.value2 || cc_status.mdep.value)
-+ && (reg_mentioned_p (SET_DEST (exp), cc_status.value1)
-+ || reg_mentioned_p (SET_DEST (exp), cc_status.value2)
-+ || reg_mentioned_p (SET_DEST (exp), cc_status.mdep.value)))
-+ {
-+ CC_STATUS_INIT;
-+ }
-+
-+ /* If this is a parallel we must step through each of the parallel
-+ expressions */
-+ if (GET_CODE (exp) == PARALLEL)
-+ {
-+ int i;
-+ for (i = 0; i < XVECLEN (exp, 0); ++i)
-+ {
-+ rtx vec_exp = XVECEXP (exp, 0, i);
-+ if ((GET_CODE (vec_exp) == SET)
-+ && (cc_status.value1 || cc_status.value2
-+ || cc_status.mdep.value)
-+ && (reg_mentioned_p (SET_DEST (vec_exp), cc_status.value1)
-+ || reg_mentioned_p (SET_DEST (vec_exp),
-+ cc_status.value2)
-+ || reg_mentioned_p (SET_DEST (vec_exp),
-+ cc_status.mdep.value)))
-+ {
-+ CC_STATUS_INIT;
-+ }
-+ }
-+ }
-+
-+ /* Check if we have memory opartions with post_inc or pre_dec on the
-+ register currently reflected in cc0 */
-+ if (GET_CODE (exp) == SET
-+ && GET_CODE (SET_SRC (exp)) == MEM
-+ && (GET_CODE (XEXP (SET_SRC (exp), 0)) == POST_INC
-+ || GET_CODE (XEXP (SET_SRC (exp), 0)) == PRE_DEC)
-+ &&
-+ (reg_mentioned_p
-+ (XEXP (XEXP (SET_SRC (exp), 0), 0), cc_status.value1)
-+ || reg_mentioned_p (XEXP (XEXP (SET_SRC (exp), 0), 0),
-+ cc_status.value2)
-+ || reg_mentioned_p (XEXP (XEXP (SET_SRC (exp), 0), 0),
-+ cc_status.mdep.value)))
-+ CC_STATUS_INIT;
-+
-+ if (GET_CODE (exp) == SET
-+ && GET_CODE (SET_DEST (exp)) == MEM
-+ && (GET_CODE (XEXP (SET_DEST (exp), 0)) == POST_INC
-+ || GET_CODE (XEXP (SET_DEST (exp), 0)) == PRE_DEC)
-+ &&
-+ (reg_mentioned_p
-+ (XEXP (XEXP (SET_DEST (exp), 0), 0), cc_status.value1)
-+ || reg_mentioned_p (XEXP (XEXP (SET_DEST (exp), 0), 0),
-+ cc_status.value2)
-+ || reg_mentioned_p (XEXP (XEXP (SET_DEST (exp), 0), 0),
-+ cc_status.mdep.value)))
-+ CC_STATUS_INIT;
-+ break;
-+
-+ case CC_SET_VNCZ:
-+ CC_STATUS_INIT;
-+ cc_status.mdep.value = recog_data.operand[0];
-+ cc_status.mdep.flags = CC_SET_VNCZ;
-+ break;
-+
-+ case CC_SET_NCZ:
-+ CC_STATUS_INIT;
-+ cc_status.mdep.value = recog_data.operand[0];
-+ cc_status.mdep.flags = CC_SET_NCZ;
-+ break;
-+
-+ case CC_SET_CZ:
-+ CC_STATUS_INIT;
-+ cc_status.mdep.value = recog_data.operand[0];
-+ cc_status.mdep.flags = CC_SET_CZ;
-+ break;
-+
-+ case CC_SET_Z:
-+ CC_STATUS_INIT;
-+ cc_status.mdep.value = recog_data.operand[0];
-+ cc_status.mdep.flags = CC_SET_Z;
-+ break;
-+
-+ case CC_CLOBBER:
-+ CC_STATUS_INIT;
-+ break;
-+
-+ default:
-+ CC_STATUS_INIT;
-+ }
-+ }
-+
-+
-+/*
-+ Outputs to stdio stream stream the assembler syntax for an instruction
-+ operand x. x is an RTL expression.
-+ */
-+void
-+avr32_print_operand (FILE * stream, rtx x, int code)
-+ {
-+ int error = 0;
-+
-+ switch (GET_CODE (x))
-+ {
-+ case UNSPEC:
-+ switch (XINT (x, 1))
-+ {
-+ case UNSPEC_COND_PL:
-+ if (code == 'i')
-+ fputs ("mi", stream);
-+ else
-+ fputs ("pl", stream);
-+ break;
-+ case UNSPEC_COND_MI:
-+ if (code == 'i')
-+ fputs ("pl", stream);
-+ else
-+ fputs ("mi", stream);
-+ break;
-+ default:
-+ error = 1;
-+ }
-+ break;
-+ case EQ:
-+ if (code == 'i')
-+ fputs ("ne", stream);
-+ else
-+ fputs ("eq", stream);
-+ break;
-+ case NE:
-+ if (code == 'i')
-+ fputs ("eq", stream);
-+ else
-+ fputs ("ne", stream);
-+ break;
-+ case GT:
-+ if (code == 'i')
-+ fputs ("le", stream);
-+ else
-+ fputs ("gt", stream);
-+ break;
-+ case GTU:
-+ if (code == 'i')
-+ fputs ("ls", stream);
-+ else
-+ fputs ("hi", stream);
-+ break;
-+ case LT:
-+ if (code == 'i')
-+ fputs ("ge", stream);
-+ else
-+ fputs ("lt", stream);
-+ break;
-+ case LTU:
-+ if (code == 'i')
-+ fputs ("hs", stream);
-+ else
-+ fputs ("lo", stream);
-+ break;
-+ case GE:
-+ if (code == 'i')
-+ fputs ("lt", stream);
-+ else
-+ fputs ("ge", stream);
-+ break;
-+ case GEU:
-+ if (code == 'i')
-+ fputs ("lo", stream);
-+ else
-+ fputs ("hs", stream);
-+ break;
-+ case LE:
-+ if (code == 'i')
-+ fputs ("gt", stream);
-+ else
-+ fputs ("le", stream);
-+ break;
-+ case LEU:
-+ if (code == 'i')
-+ fputs ("hi", stream);
-+ else
-+ fputs ("ls", stream);
-+ break;
-+ case CONST_INT:
-+ {
-+ HOST_WIDE_INT value = INTVAL (x);
-+
-+ switch (code)
-+ {
-+ case 'm':
-+ if ( HOST_BITS_PER_WIDE_INT > BITS_PER_WORD )
-+ {
-+ /* A const_int can be used to represent DImode constants. */
-+ value >>= BITS_PER_WORD;
-+ }
-+ /* We might get a const_int immediate for setting a DI register,
-+ we then must then return the correct sign extended DI. The most
-+ significant word is just a sign extension. */
-+ else if (value < 0)
-+ value = -1;
-+ else
-+ value = 0;
-+ break;
-+ case 'i':
-+ value++;
-+ break;
-+ case 'p':
-+ {
-+ /* Set to bit position of first bit set in immediate */
-+ int i, bitpos = 32;
-+ for (i = 0; i < 32; i++)
-+ if (value & (1 << i))
-+ {
-+ bitpos = i;
-+ break;
-+ }
-+ value = bitpos;
-+ }
-+ break;
-+ case 'r':
-+ {
-+ /* Reglist 8 */
-+ char op[50];
-+ op[0] = '\0';
-+
-+ if (value & 0x01)
-+ sprintf (op, "r0-r3");
-+ if (value & 0x02)
-+ strlen (op) ? sprintf (op, "%s, r4-r7", op) : sprintf (op,
-+ "r4-r7");
-+ if (value & 0x04)
-+ strlen (op) ? sprintf (op, "%s, r8-r9", op) : sprintf (op,
-+ "r8-r9");
-+ if (value & 0x08)
-+ strlen (op) ? sprintf (op, "%s, r10", op) : sprintf (op,
-+ "r10");
-+ if (value & 0x10)
-+ strlen (op) ? sprintf (op, "%s, r11", op) : sprintf (op,
-+ "r11");
-+ if (value & 0x20)
-+ strlen (op) ? sprintf (op, "%s, r12", op) : sprintf (op,
-+ "r12");
-+ if (value & 0x40)
-+ strlen (op) ? sprintf (op, "%s, lr", op) : sprintf (op, "lr");
-+ if (value & 0x80)
-+ strlen (op) ? sprintf (op, "%s, pc", op) : sprintf (op, "pc");
-+
-+ fputs (op, stream);
-+ return;
-+ }
-+ case 's':
-+ {
-+ /* Reglist 16 */
-+ char reglist16_string[100];
-+ int i;
-+ reglist16_string[0] = '\0';
-+
-+ for (i = 0; i < 16; ++i)
-+ {
-+ if (value & (1 << i))
-+ {
-+ strlen (reglist16_string) ? sprintf (reglist16_string,
-+ "%s, %s",
-+ reglist16_string,
-+ reg_names
-+ [INTERNAL_REGNUM
-+ (i)]) :
-+ sprintf (reglist16_string, "%s",
-+ reg_names[INTERNAL_REGNUM (i)]);
-+ }
-+ }
-+ fputs (reglist16_string, stream);
-+ return;
-+ }
-+ case 'C':
-+ {
-+ /* RegListCP8 */
-+ char reglist_string[100];
-+ avr32_make_fp_reglist_w (value, (char *) reglist_string);
-+ fputs (reglist_string, stream);
-+ return;
-+ }
-+ case 'D':
-+ {
-+ /* RegListCPD8 */
-+ char reglist_string[100];
-+ avr32_make_fp_reglist_d (value, (char *) reglist_string);
-+ fputs (reglist_string, stream);
-+ return;
-+ }
-+ case 'h':
-+ /* Print halfword part of word */
-+ fputs (value ? "b" : "t", stream);
-+ return;
-+ }
-+
-+ /* Print Value */
-+ fprintf (stream, "%d", value);
-+ break;
-+ }
-+ case CONST_DOUBLE:
-+ {
-+ HOST_WIDE_INT hi, lo;
-+ if (SCALAR_FLOAT_MODE_P (GET_MODE (x)))
-+ {
-+ HOST_WIDE_INT target_float[2];
-+ hi = lo = 0;
-+ real_to_target (target_float, CONST_DOUBLE_REAL_VALUE (x),
-+ GET_MODE (x));
-+ /* For doubles the most significant part starts at index 0. */
-+ if (GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD)
-+ {
-+ hi = target_float[0];
-+ lo = target_float[1];
-+ }
-+ else
-+ {
-+ lo = target_float[0];
-+ }
-+ }
-+ else
-+ {
-+ hi = CONST_DOUBLE_HIGH (x);
-+ lo = CONST_DOUBLE_LOW (x);
-+ }
-+
-+ if (code == 'm')
-+ fprintf (stream, "%ld", hi);
-+ else
-+ fprintf (stream, "%ld", lo);
-+
-+ break;
-+ }
-+ case CONST:
-+ output_addr_const (stream, XEXP (XEXP (x, 0), 0));
-+ fprintf (stream, "+%ld", INTVAL (XEXP (XEXP (x, 0), 1)));
-+ break;
-+ case REG:
-+ /* Swap register name if the register is DImode or DFmode. */
-+ if (GET_MODE (x) == DImode || GET_MODE (x) == DFmode)
-+ {
-+ /* Double register must have an even numbered address */
-+ gcc_assert (!(REGNO (x) % 2));
-+ if (code == 'm')
-+ fputs (reg_names[true_regnum (x)], stream);
-+ else
-+ fputs (reg_names[true_regnum (x) + 1], stream);
-+ }
-+ else if (GET_MODE (x) == TImode)
-+ {
-+ switch (code)
-+ {
-+ case 'T':
-+ fputs (reg_names[true_regnum (x)], stream);
-+ break;
-+ case 'U':
-+ fputs (reg_names[true_regnum (x) + 1], stream);
-+ break;
-+ case 'L':
-+ fputs (reg_names[true_regnum (x) + 2], stream);
-+ break;
-+ case 'B':
-+ fputs (reg_names[true_regnum (x) + 3], stream);
-+ break;
-+ default:
-+ fprintf (stream, "%s, %s, %s, %s",
-+ reg_names[true_regnum (x) + 3],
-+ reg_names[true_regnum (x) + 2],
-+ reg_names[true_regnum (x) + 1],
-+ reg_names[true_regnum (x)]);
-+ break;
-+ }
-+ }
-+ else
-+ {
-+ fputs (reg_names[true_regnum (x)], stream);
-+ }
-+ break;
-+ case CODE_LABEL:
-+ case LABEL_REF:
-+ case SYMBOL_REF:
-+ output_addr_const (stream, x);
-+ break;
-+ case MEM:
-+ switch (GET_CODE (XEXP (x, 0)))
-+ {
-+ case LABEL_REF:
-+ case SYMBOL_REF:
-+ output_addr_const (stream, XEXP (x, 0));
-+ break;
-+ case MEM:
-+ switch (GET_CODE (XEXP (XEXP (x, 0), 0)))
-+ {
-+ case SYMBOL_REF:
-+ output_addr_const (stream, XEXP (XEXP (x, 0), 0));
-+ break;
-+ default:
-+ error = 1;
-+ break;
-+ }
-+ break;
-+ case REG:
-+ avr32_print_operand (stream, XEXP (x, 0), 0);
-+ if (code != 'p')
-+ fputs ("[0]", stream);
-+ break;
-+ case PRE_DEC:
-+ fputs ("--", stream);
-+ avr32_print_operand (stream, XEXP (XEXP (x, 0), 0), 0);
-+ break;
-+ case POST_INC:
-+ avr32_print_operand (stream, XEXP (XEXP (x, 0), 0), 0);
-+ fputs ("++", stream);
-+ break;
-+ case PLUS:
-+ {
-+ rtx op0 = XEXP (XEXP (x, 0), 0);
-+ rtx op1 = XEXP (XEXP (x, 0), 1);
-+ rtx base = NULL_RTX, offset = NULL_RTX;
-+
-+ if (avr32_address_register_rtx_p (op0, 1))
-+ {
-+ base = op0;
-+ offset = op1;
-+ }
-+ else if (avr32_address_register_rtx_p (op1, 1))
-+ {
-+ /* Operands are switched. */
-+ base = op1;
-+ offset = op0;
-+ }
-+
-+ gcc_assert (base && offset
-+ && avr32_address_register_rtx_p (base, 1)
-+ && avr32_legitimate_index_p (GET_MODE (x), offset,
-+ 1));
-+
-+ avr32_print_operand (stream, base, 0);
-+ fputs ("[", stream);
-+ avr32_print_operand (stream, offset, 0);
-+ fputs ("]", stream);
-+ break;
-+ }
-+ case CONST:
-+ output_addr_const (stream, XEXP (XEXP (XEXP (x, 0), 0), 0));
-+ fprintf (stream, " + %ld",
-+ INTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1)));
-+ break;
-+ default:
-+ error = 1;
-+ }
-+ break;
-+ case MULT:
-+ {
-+ int value = INTVAL (XEXP (x, 1));
-+
-+ /* Convert immediate in multiplication into a shift immediate */
-+ switch (value)
-+ {
-+ case 2:
-+ value = 1;
-+ break;
-+ case 4:
-+ value = 2;
-+ break;
-+ case 8:
-+ value = 3;
-+ break;
-+ default:
-+ value = 0;
-+ }
-+ fprintf (stream, "%s << %i", reg_names[true_regnum (XEXP (x, 0))],
-+ value);
-+ break;
-+ }
-+ case ASHIFT:
-+ if (GET_CODE (XEXP (x, 1)) == CONST_INT)
-+ fprintf (stream, "%s << %i", reg_names[true_regnum (XEXP (x, 0))],
-+ (int) INTVAL (XEXP (x, 1)));
-+ else if (REG_P (XEXP (x, 1)))
-+ fprintf (stream, "%s << %s", reg_names[true_regnum (XEXP (x, 0))],
-+ reg_names[true_regnum (XEXP (x, 1))]);
-+ else
-+ {
-+ error = 1;
-+ }
-+ break;
-+ case LSHIFTRT:
-+ if (GET_CODE (XEXP (x, 1)) == CONST_INT)
-+ fprintf (stream, "%s >> %i", reg_names[true_regnum (XEXP (x, 0))],
-+ (int) INTVAL (XEXP (x, 1)));
-+ else if (REG_P (XEXP (x, 1)))
-+ fprintf (stream, "%s >> %s", reg_names[true_regnum (XEXP (x, 0))],
-+ reg_names[true_regnum (XEXP (x, 1))]);
-+ else
-+ {
-+ error = 1;
-+ }
-+ fprintf (stream, ">>");
-+ break;
-+ case PARALLEL:
-+ {
-+ /* Load store multiple */
-+ int i;
-+ int count = XVECLEN (x, 0);
-+ int reglist16 = 0;
-+ char reglist16_string[100];
-+
-+ for (i = 0; i < count; ++i)
-+ {
-+ rtx vec_elm = XVECEXP (x, 0, i);
-+ if (GET_MODE (vec_elm) != SET)
-+ {
-+ debug_rtx (vec_elm);
-+ internal_error ("Unknown element in parallel expression!");
-+ }
-+ if (GET_MODE (XEXP (vec_elm, 0)) == REG)
-+ {
-+ /* Load multiple */
-+ reglist16 |= 1 << ASM_REGNUM (REGNO (XEXP (vec_elm, 0)));
-+ }
-+ else
-+ {
-+ /* Store multiple */
-+ reglist16 |= 1 << ASM_REGNUM (REGNO (XEXP (vec_elm, 1)));
-+ }
-+ }
-+
-+ avr32_make_reglist16 (reglist16, reglist16_string);
-+ fputs (reglist16_string, stream);
-+
-+ break;
-+ }
-+
-+ default:
-+ error = 1;
-+ }
-+
-+ if (error)
-+ {
-+ debug_rtx (x);
-+ internal_error ("Illegal expression for avr32_print_operand");
-+ }
-+ }
-+
-+rtx
-+avr32_get_note_reg_equiv (rtx insn)
-+ {
-+ rtx note;
-+
-+ note = find_reg_note (insn, REG_EQUIV, NULL_RTX);
-+
-+ if (note != NULL_RTX)
-+ return XEXP (note, 0);
-+ else
-+ return NULL_RTX;
-+ }
-+
-+/*
-+ Outputs to stdio stream stream the assembler syntax for an instruction
-+ operand that is a memory reference whose address is x. x is an RTL
-+ expression.
-+
-+ ToDo: fixme.
-+ */
-+void
-+avr32_print_operand_address (FILE * stream, rtx x)
-+ {
-+ fprintf (stream, "(%d) /* address */", REGNO (x));
-+ }
-+
-+/* Return true if _GLOBAL_OFFSET_TABLE_ symbol is mentioned. */
-+bool
-+avr32_got_mentioned_p (rtx addr)
-+ {
-+ if (GET_CODE (addr) == MEM)
-+ addr = XEXP (addr, 0);
-+ while (GET_CODE (addr) == CONST)
-+ addr = XEXP (addr, 0);
-+ if (GET_CODE (addr) == SYMBOL_REF)
-+ {
-+ return streq (XSTR (addr, 0), "_GLOBAL_OFFSET_TABLE_");
-+ }
-+ if (GET_CODE (addr) == PLUS || GET_CODE (addr) == MINUS)
-+ {
-+ bool l1, l2;
-+
-+ l1 = avr32_got_mentioned_p (XEXP (addr, 0));
-+ l2 = avr32_got_mentioned_p (XEXP (addr, 1));
-+ return l1 || l2;
-+ }
-+ return false;
-+ }
-+
-+
-+/* Find the symbol in an address expression. */
-+
-+rtx
-+avr32_find_symbol (rtx addr)
-+ {
-+ if (GET_CODE (addr) == MEM)
-+ addr = XEXP (addr, 0);
-+
-+ while (GET_CODE (addr) == CONST)
-+ addr = XEXP (addr, 0);
-+
-+ if (GET_CODE (addr) == SYMBOL_REF || GET_CODE (addr) == LABEL_REF)
-+ return addr;
-+ if (GET_CODE (addr) == PLUS)
-+ {
-+ rtx l1, l2;
-+
-+ l1 = avr32_find_symbol (XEXP (addr, 0));
-+ l2 = avr32_find_symbol (XEXP (addr, 1));
-+ if (l1 != NULL_RTX && l2 == NULL_RTX)
-+ return l1;
-+ else if (l1 == NULL_RTX && l2 != NULL_RTX)
-+ return l2;
-+ }
-+
-+ return NULL_RTX;
-+ }
-+
-+
-+/* Routines for manipulation of the constant pool. */
-+
-+/* AVR32 instructions cannot load a large constant directly into a
-+ register; they have to come from a pc relative load. The constant
-+ must therefore be placed in the addressable range of the pc
-+ relative load. Depending on the precise pc relative load
-+ instruction the range is somewhere between 256 bytes and 4k. This
-+ means that we often have to dump a constant inside a function, and
-+ generate code to branch around it.
-+
-+ It is important to minimize this, since the branches will slow
-+ things down and make the code larger.
-+
-+ Normally we can hide the table after an existing unconditional
-+ branch so that there is no interruption of the flow, but in the
-+ worst case the code looks like this:
-+
-+ lddpc rn, L1
-+ ...
-+ rjmp L2
-+ align
-+ L1: .long value
-+ L2:
-+ ...
-+
-+ lddpc rn, L3
-+ ...
-+ rjmp L4
-+ align
-+ L3: .long value
-+ L4:
-+ ...
-+
-+ We fix this by performing a scan after scheduling, which notices
-+ which instructions need to have their operands fetched from the
-+ constant table and builds the table.
-+
-+ The algorithm starts by building a table of all the constants that
-+ need fixing up and all the natural barriers in the function (places
-+ where a constant table can be dropped without breaking the flow).
-+ For each fixup we note how far the pc-relative replacement will be
-+ able to reach and the offset of the instruction into the function.
-+
-+ Having built the table we then group the fixes together to form
-+ tables that are as large as possible (subject to addressing
-+ constraints) and emit each table of constants after the last
-+ barrier that is within range of all the instructions in the group.
-+ If a group does not contain a barrier, then we forcibly create one
-+ by inserting a jump instruction into the flow. Once the table has
-+ been inserted, the insns are then modified to reference the
-+ relevant entry in the pool.
-+
-+ Possible enhancements to the algorithm (not implemented) are:
-+
-+ 1) For some processors and object formats, there may be benefit in
-+ aligning the pools to the start of cache lines; this alignment
-+ would need to be taken into account when calculating addressability
-+ of a pool. */
-+
-+/* These typedefs are located at the start of this file, so that
-+ they can be used in the prototypes there. This comment is to
-+ remind readers of that fact so that the following structures
-+ can be understood more easily.
-+
-+ typedef struct minipool_node Mnode;
-+ typedef struct minipool_fixup Mfix; */
-+
-+struct minipool_node
-+{
-+ /* Doubly linked chain of entries. */
-+ Mnode *next;
-+ Mnode *prev;
-+ /* The maximum offset into the code that this entry can be placed. While
-+ pushing fixes for forward references, all entries are sorted in order of
-+ increasing max_address. */
-+ HOST_WIDE_INT max_address;
-+ /* Similarly for an entry inserted for a backwards ref. */
-+ HOST_WIDE_INT min_address;
-+ /* The number of fixes referencing this entry. This can become zero if we
-+ "unpush" an entry. In this case we ignore the entry when we come to
-+ emit the code. */
-+ int refcount;
-+ /* The offset from the start of the minipool. */
-+ HOST_WIDE_INT offset;
-+ /* The value in table. */
-+ rtx value;
-+ /* The mode of value. */
-+ enum machine_mode mode;
-+ /* The size of the value. */
-+ int fix_size;
-+};
-+
-+struct minipool_fixup
-+{
-+ Mfix *next;
-+ rtx insn;
-+ HOST_WIDE_INT address;
-+ rtx *loc;
-+ enum machine_mode mode;
-+ int fix_size;
-+ rtx value;
-+ Mnode *minipool;
-+ HOST_WIDE_INT forwards;
-+ HOST_WIDE_INT backwards;
-+};
-+
-+
-+/* Fixes less than a word need padding out to a word boundary. */
-+#define MINIPOOL_FIX_SIZE(mode, value) \
-+ (IS_FORCE_MINIPOOL(value) ? 0 : \
-+ (GET_MODE_SIZE ((mode)) >= 4 ? GET_MODE_SIZE ((mode)) : 4))
-+
-+#define IS_FORCE_MINIPOOL(x) \
-+ (GET_CODE(x) == UNSPEC && \
-+ XINT(x, 1) == UNSPEC_FORCE_MINIPOOL)
-+
-+static Mnode *minipool_vector_head;
-+static Mnode *minipool_vector_tail;
-+
-+/* The linked list of all minipool fixes required for this function. */
-+Mfix *minipool_fix_head;
-+Mfix *minipool_fix_tail;
-+/* The fix entry for the current minipool, once it has been placed. */
-+Mfix *minipool_barrier;
-+
-+/* Determines if INSN is the start of a jump table. Returns the end
-+ of the TABLE or NULL_RTX. */
-+static rtx
-+is_jump_table (rtx insn)
-+ {
-+ rtx table;
-+
-+ if (GET_CODE (insn) == JUMP_INSN
-+ && JUMP_LABEL (insn) != NULL
-+ && ((table = next_real_insn (JUMP_LABEL (insn)))
-+ == next_real_insn (insn))
-+ && table != NULL
-+ && GET_CODE (table) == JUMP_INSN
-+ && (GET_CODE (PATTERN (table)) == ADDR_VEC
-+ || GET_CODE (PATTERN (table)) == ADDR_DIFF_VEC))
-+ return table;
-+
-+ return NULL_RTX;
-+ }
-+
-+static HOST_WIDE_INT
-+get_jump_table_size (rtx insn)
-+ {
-+ /* ADDR_VECs only take room if read-only data does into the text section. */
-+ if (JUMP_TABLES_IN_TEXT_SECTION
-+#if !defined(READONLY_DATA_SECTION_ASM_OP)
-+ || 1
-+#endif
-+ )
-+ {
-+ rtx body = PATTERN (insn);
-+ int elt = GET_CODE (body) == ADDR_DIFF_VEC ? 1 : 0;
-+
-+ return GET_MODE_SIZE (GET_MODE (body)) * XVECLEN (body, elt);
-+ }
-+
-+ return 0;
-+ }
-+
-+/* Move a minipool fix MP from its current location to before MAX_MP.
-+ If MAX_MP is NULL, then MP doesn't need moving, but the addressing
-+ constraints may need updating. */
-+static Mnode *
-+move_minipool_fix_forward_ref (Mnode * mp, Mnode * max_mp,
-+ HOST_WIDE_INT max_address)
-+ {
-+ /* This should never be true and the code below assumes these are
-+ different. */
-+ if (mp == max_mp)
-+ abort ();
-+
-+ if (max_mp == NULL)
-+ {
-+ if (max_address < mp->max_address)
-+ mp->max_address = max_address;
-+ }
-+ else
-+ {
-+ if (max_address > max_mp->max_address - mp->fix_size)
-+ mp->max_address = max_mp->max_address - mp->fix_size;
-+ else
-+ mp->max_address = max_address;
-+
-+ /* Unlink MP from its current position. Since max_mp is non-null,
-+ mp->prev must be non-null. */
-+ mp->prev->next = mp->next;
-+ if (mp->next != NULL)
-+ mp->next->prev = mp->prev;
-+ else
-+ minipool_vector_tail = mp->prev;
-+
-+ /* Re-insert it before MAX_MP. */
-+ mp->next = max_mp;
-+ mp->prev = max_mp->prev;
-+ max_mp->prev = mp;
-+
-+ if (mp->prev != NULL)
-+ mp->prev->next = mp;
-+ else
-+ minipool_vector_head = mp;
-+ }
-+
-+ /* Save the new entry. */
-+ max_mp = mp;
-+
-+ /* Scan over the preceding entries and adjust their addresses as required.
-+ */
-+ while (mp->prev != NULL
-+ && mp->prev->max_address > mp->max_address - mp->prev->fix_size)
-+ {
-+ mp->prev->max_address = mp->max_address - mp->prev->fix_size;
-+ mp = mp->prev;
-+ }
-+
-+ return max_mp;
-+ }
-+
-+/* Add a constant to the minipool for a forward reference. Returns the
-+ node added or NULL if the constant will not fit in this pool. */
-+static Mnode *
-+add_minipool_forward_ref (Mfix * fix)
-+{
-+ /* If set, max_mp is the first pool_entry that has a lower constraint than
-+ the one we are trying to add. */
-+ Mnode *max_mp = NULL;
-+ HOST_WIDE_INT max_address = fix->address + fix->forwards;
-+ Mnode *mp;
-+
-+ /* If this fix's address is greater than the address of the first entry,
-+ then we can't put the fix in this pool. We subtract the size of the
-+ current fix to ensure that if the table is fully packed we still have
-+ enough room to insert this value by suffling the other fixes forwards. */
-+ if (minipool_vector_head &&
-+ fix->address >= minipool_vector_head->max_address - fix->fix_size)
-+ return NULL;
-+
-+ /* Scan the pool to see if a constant with the same value has already been
-+ added. While we are doing this, also note the location where we must
-+ insert the constant if it doesn't already exist. */
-+ for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+ {
-+ if (GET_CODE (fix->value) == GET_CODE (mp->value)
-+ && fix->mode == mp->mode
-+ && (GET_CODE (fix->value) != CODE_LABEL
-+ || (CODE_LABEL_NUMBER (fix->value)
-+ == CODE_LABEL_NUMBER (mp->value)))
-+ && rtx_equal_p (fix->value, mp->value))
-+ {
-+ /* More than one fix references this entry. */
-+ mp->refcount++;
-+ return move_minipool_fix_forward_ref (mp, max_mp, max_address);
-+ }
-+
-+ /* Note the insertion point if necessary. */
-+ if (max_mp == NULL && mp->max_address > max_address)
-+ max_mp = mp;
-+
-+ }
-+
-+ /* The value is not currently in the minipool, so we need to create a new
-+ entry for it. If MAX_MP is NULL, the entry will be put on the end of
-+ the list since the placement is less constrained than any existing
-+ entry. Otherwise, we insert the new fix before MAX_MP and, if
-+ necessary, adjust the constraints on the other entries. */
-+ mp = xmalloc (sizeof (*mp));
-+ mp->fix_size = fix->fix_size;
-+ mp->mode = fix->mode;
-+ mp->value = fix->value;
-+ mp->refcount = 1;
-+ /* Not yet required for a backwards ref. */
-+ mp->min_address = -65536;
-+
-+ if (max_mp == NULL)
-+ {
-+ mp->max_address = max_address;
-+ mp->next = NULL;
-+ mp->prev = minipool_vector_tail;
-+
-+ if (mp->prev == NULL)
-+ {
-+ minipool_vector_head = mp;
-+ minipool_vector_label = gen_label_rtx ();
-+ }
-+ else
-+ mp->prev->next = mp;
-+
-+ minipool_vector_tail = mp;
-+ }
-+ else
-+ {
-+ if (max_address > max_mp->max_address - mp->fix_size)
-+ mp->max_address = max_mp->max_address - mp->fix_size;
-+ else
-+ mp->max_address = max_address;
-+
-+ mp->next = max_mp;
-+ mp->prev = max_mp->prev;
-+ max_mp->prev = mp;
-+ if (mp->prev != NULL)
-+ mp->prev->next = mp;
-+ else
-+ minipool_vector_head = mp;
-+ }
-+
-+ /* Save the new entry. */
-+ max_mp = mp;
-+
-+ /* Scan over the preceding entries and adjust their addresses as required.
-+ */
-+ while (mp->prev != NULL
-+ && mp->prev->max_address > mp->max_address - mp->prev->fix_size)
-+ {
-+ mp->prev->max_address = mp->max_address - mp->prev->fix_size;
-+ mp = mp->prev;
-+ }
-+
-+ return max_mp;
-+}
-+
-+static Mnode *
-+move_minipool_fix_backward_ref (Mnode * mp, Mnode * min_mp,
-+ HOST_WIDE_INT min_address)
-+ {
-+ HOST_WIDE_INT offset;
-+
-+ /* This should never be true, and the code below assumes these are
-+ different. */
-+ if (mp == min_mp)
-+ abort ();
-+
-+ if (min_mp == NULL)
-+ {
-+ if (min_address > mp->min_address)
-+ mp->min_address = min_address;
-+ }
-+ else
-+ {
-+ /* We will adjust this below if it is too loose. */
-+ mp->min_address = min_address;
-+
-+ /* Unlink MP from its current position. Since min_mp is non-null,
-+ mp->next must be non-null. */
-+ mp->next->prev = mp->prev;
-+ if (mp->prev != NULL)
-+ mp->prev->next = mp->next;
-+ else
-+ minipool_vector_head = mp->next;
-+
-+ /* Reinsert it after MIN_MP. */
-+ mp->prev = min_mp;
-+ mp->next = min_mp->next;
-+ min_mp->next = mp;
-+ if (mp->next != NULL)
-+ mp->next->prev = mp;
-+ else
-+ minipool_vector_tail = mp;
-+ }
-+
-+ min_mp = mp;
-+
-+ offset = 0;
-+ for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+ {
-+ mp->offset = offset;
-+ if (mp->refcount > 0)
-+ offset += mp->fix_size;
-+
-+ if (mp->next && mp->next->min_address < mp->min_address + mp->fix_size)
-+ mp->next->min_address = mp->min_address + mp->fix_size;
-+ }
-+
-+ return min_mp;
-+ }
-+
-+/* Add a constant to the minipool for a backward reference. Returns the
-+ node added or NULL if the constant will not fit in this pool.
-+
-+ Note that the code for insertion for a backwards reference can be
-+ somewhat confusing because the calculated offsets for each fix do
-+ not take into account the size of the pool (which is still under
-+ construction. */
-+static Mnode *
-+add_minipool_backward_ref (Mfix * fix)
-+{
-+ /* If set, min_mp is the last pool_entry that has a lower constraint than
-+ the one we are trying to add. */
-+ Mnode *min_mp = NULL;
-+ /* This can be negative, since it is only a constraint. */
-+ HOST_WIDE_INT min_address = fix->address - fix->backwards;
-+ Mnode *mp;
-+
-+ /* If we can't reach the current pool from this insn, or if we can't insert
-+ this entry at the end of the pool without pushing other fixes out of
-+ range, then we don't try. This ensures that we can't fail later on. */
-+ if (min_address >= minipool_barrier->address
-+ || (minipool_vector_tail->min_address + fix->fix_size
-+ >= minipool_barrier->address))
-+ return NULL;
-+
-+ /* Scan the pool to see if a constant with the same value has already been
-+ added. While we are doing this, also note the location where we must
-+ insert the constant if it doesn't already exist. */
-+ for (mp = minipool_vector_tail; mp != NULL; mp = mp->prev)
-+ {
-+ if (GET_CODE (fix->value) == GET_CODE (mp->value)
-+ && fix->mode == mp->mode
-+ && (GET_CODE (fix->value) != CODE_LABEL
-+ || (CODE_LABEL_NUMBER (fix->value)
-+ == CODE_LABEL_NUMBER (mp->value)))
-+ && rtx_equal_p (fix->value, mp->value)
-+ /* Check that there is enough slack to move this entry to the end
-+ of the table (this is conservative). */
-+ && (mp->max_address
-+ > (minipool_barrier->address
-+ + minipool_vector_tail->offset
-+ + minipool_vector_tail->fix_size)))
-+ {
-+ mp->refcount++;
-+ return move_minipool_fix_backward_ref (mp, min_mp, min_address);
-+ }
-+
-+ if (min_mp != NULL)
-+ mp->min_address += fix->fix_size;
-+ else
-+ {
-+ /* Note the insertion point if necessary. */
-+ if (mp->min_address < min_address)
-+ {
-+ min_mp = mp;
-+ }
-+ else if (mp->max_address
-+ < minipool_barrier->address + mp->offset + fix->fix_size)
-+ {
-+ /* Inserting before this entry would push the fix beyond its
-+ maximum address (which can happen if we have re-located a
-+ forwards fix); force the new fix to come after it. */
-+ min_mp = mp;
-+ min_address = mp->min_address + fix->fix_size;
-+ }
-+ }
-+ }
-+
-+ /* We need to create a new entry. */
-+ mp = xmalloc (sizeof (*mp));
-+ mp->fix_size = fix->fix_size;
-+ mp->mode = fix->mode;
-+ mp->value = fix->value;
-+ mp->refcount = 1;
-+ mp->max_address = minipool_barrier->address + 65536;
-+
-+ mp->min_address = min_address;
-+
-+ if (min_mp == NULL)
-+ {
-+ mp->prev = NULL;
-+ mp->next = minipool_vector_head;
-+
-+ if (mp->next == NULL)
-+ {
-+ minipool_vector_tail = mp;
-+ minipool_vector_label = gen_label_rtx ();
-+ }
-+ else
-+ mp->next->prev = mp;
-+
-+ minipool_vector_head = mp;
-+ }
-+ else
-+ {
-+ mp->next = min_mp->next;
-+ mp->prev = min_mp;
-+ min_mp->next = mp;
-+
-+ if (mp->next != NULL)
-+ mp->next->prev = mp;
-+ else
-+ minipool_vector_tail = mp;
-+ }
-+
-+ /* Save the new entry. */
-+ min_mp = mp;
-+
-+ if (mp->prev)
-+ mp = mp->prev;
-+ else
-+ mp->offset = 0;
-+
-+ /* Scan over the following entries and adjust their offsets. */
-+ while (mp->next != NULL)
-+ {
-+ if (mp->next->min_address < mp->min_address + mp->fix_size)
-+ mp->next->min_address = mp->min_address + mp->fix_size;
-+
-+ if (mp->refcount)
-+ mp->next->offset = mp->offset + mp->fix_size;
-+ else
-+ mp->next->offset = mp->offset;
-+
-+ mp = mp->next;
-+ }
-+
-+ return min_mp;
-+}
-+
-+static void
-+assign_minipool_offsets (Mfix * barrier)
-+ {
-+ HOST_WIDE_INT offset = 0;
-+ Mnode *mp;
-+
-+ minipool_barrier = barrier;
-+
-+ for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+ {
-+ mp->offset = offset;
-+
-+ if (mp->refcount > 0)
-+ offset += mp->fix_size;
-+ }
-+ }
-+
-+/* Print a symbolic form of X to the debug file, F. */
-+static void
-+avr32_print_value (FILE * f, rtx x)
-+ {
-+ switch (GET_CODE (x))
-+ {
-+ case CONST_INT:
-+ fprintf (f, "0x%x", (int) INTVAL (x));
-+ return;
-+
-+ case CONST_DOUBLE:
-+ fprintf (f, "<0x%lx,0x%lx>", (long) XWINT (x, 2), (long) XWINT (x, 3));
-+ return;
-+
-+ case CONST_VECTOR:
-+ {
-+ int i;
-+
-+ fprintf (f, "<");
-+ for (i = 0; i < CONST_VECTOR_NUNITS (x); i++)
-+ {
-+ fprintf (f, "0x%x", (int) INTVAL (CONST_VECTOR_ELT (x, i)));
-+ if (i < (CONST_VECTOR_NUNITS (x) - 1))
-+ fputc (',', f);
-+ }
-+ fprintf (f, ">");
-+ }
-+ return;
-+
-+ case CONST_STRING:
-+ fprintf (f, "\"%s\"", XSTR (x, 0));
-+ return;
-+
-+ case SYMBOL_REF:
-+ fprintf (f, "`%s'", XSTR (x, 0));
-+ return;
-+
-+ case LABEL_REF:
-+ fprintf (f, "L%d", INSN_UID (XEXP (x, 0)));
-+ return;
-+
-+ case CONST:
-+ avr32_print_value (f, XEXP (x, 0));
-+ return;
-+
-+ case PLUS:
-+ avr32_print_value (f, XEXP (x, 0));
-+ fprintf (f, "+");
-+ avr32_print_value (f, XEXP (x, 1));
-+ return;
-+
-+ case PC:
-+ fprintf (f, "pc");
-+ return;
-+
-+ default:
-+ fprintf (f, "????");
-+ return;
-+ }
-+ }
-+
-+int
-+is_minipool_label (rtx label)
-+ {
-+ minipool_labels *cur_mp_label = cfun->machine->minipool_label_head;
-+
-+ if (GET_CODE (label) != CODE_LABEL)
-+ return FALSE;
-+
-+ while (cur_mp_label)
-+ {
-+ if (CODE_LABEL_NUMBER (label)
-+ == CODE_LABEL_NUMBER (cur_mp_label->label))
-+ return TRUE;
-+ cur_mp_label = cur_mp_label->next;
-+ }
-+ return FALSE;
-+ }
-+
-+static void
-+new_minipool_label (rtx label)
-+ {
-+ if (!cfun->machine->minipool_label_head)
-+ {
-+ cfun->machine->minipool_label_head =
-+ ggc_alloc (sizeof (minipool_labels));
-+ cfun->machine->minipool_label_tail = cfun->machine->minipool_label_head;
-+ cfun->machine->minipool_label_head->label = label;
-+ cfun->machine->minipool_label_head->next = 0;
-+ cfun->machine->minipool_label_head->prev = 0;
-+ }
-+ else
-+ {
-+ cfun->machine->minipool_label_tail->next =
-+ ggc_alloc (sizeof (minipool_labels));
-+ cfun->machine->minipool_label_tail->next->label = label;
-+ cfun->machine->minipool_label_tail->next->next = 0;
-+ cfun->machine->minipool_label_tail->next->prev =
-+ cfun->machine->minipool_label_tail;
-+ cfun->machine->minipool_label_tail =
-+ cfun->machine->minipool_label_tail->next;
-+ }
-+ }
-+
-+/* Output the literal table */
-+static void
-+dump_minipool (rtx scan)
-+ {
-+ Mnode *mp;
-+ Mnode *nmp;
-+
-+ if (dump_file)
-+ fprintf (dump_file,
-+ ";; Emitting minipool after insn %u; address %ld; align %d (bytes)\n",
-+ INSN_UID (scan), (unsigned long) minipool_barrier->address, 4);
-+
-+ scan = emit_insn_after (gen_consttable_start (), scan);
-+ scan = emit_insn_after (gen_align_4 (), scan);
-+ scan = emit_label_after (minipool_vector_label, scan);
-+ new_minipool_label (minipool_vector_label);
-+
-+ for (mp = minipool_vector_head; mp != NULL; mp = nmp)
-+ {
-+ if (mp->refcount > 0)
-+ {
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; Offset %u, min %ld, max %ld ",
-+ (unsigned) mp->offset, (unsigned long) mp->min_address,
-+ (unsigned long) mp->max_address);
-+ avr32_print_value (dump_file, mp->value);
-+ fputc ('\n', dump_file);
-+ }
-+
-+ switch (mp->fix_size)
-+ {
-+#ifdef HAVE_consttable_4
-+ case 4:
-+ scan = emit_insn_after (gen_consttable_4 (mp->value), scan);
-+ break;
-+
-+#endif
-+#ifdef HAVE_consttable_8
-+ case 8:
-+ scan = emit_insn_after (gen_consttable_8 (mp->value), scan);
-+ break;
-+
-+#endif
-+#ifdef HAVE_consttable_16
-+ case 16:
-+ scan = emit_insn_after (gen_consttable_16 (mp->value), scan);
-+ break;
-+
-+#endif
-+ case 0:
-+ /* This can happen for force-minipool entries which just are
-+ there to force the minipool to be generate. */
-+ break;
-+ default:
-+ abort ();
-+ break;
-+ }
-+ }
-+
-+ nmp = mp->next;
-+ free (mp);
-+ }
-+
-+ minipool_vector_head = minipool_vector_tail = NULL;
-+ scan = emit_insn_after (gen_consttable_end (), scan);
-+ scan = emit_barrier_after (scan);
-+ }
-+
-+/* Return the cost of forcibly inserting a barrier after INSN. */
-+static int
-+avr32_barrier_cost (rtx insn)
-+ {
-+ /* Basing the location of the pool on the loop depth is preferable, but at
-+ the moment, the basic block information seems to be corrupt by this
-+ stage of the compilation. */
-+ int base_cost = 50;
-+ rtx next = next_nonnote_insn (insn);
-+
-+ if (next != NULL && GET_CODE (next) == CODE_LABEL)
-+ base_cost -= 20;
-+
-+ switch (GET_CODE (insn))
-+ {
-+ case CODE_LABEL:
-+ /* It will always be better to place the table before the label, rather
-+ than after it. */
-+ return 50;
-+
-+ case INSN:
-+ case CALL_INSN:
-+ return base_cost;
-+
-+ case JUMP_INSN:
-+ return base_cost - 10;
-+
-+ default:
-+ return base_cost + 10;
-+ }
-+ }
-+
-+/* Find the best place in the insn stream in the range
-+ (FIX->address,MAX_ADDRESS) to forcibly insert a minipool barrier.
-+ Create the barrier by inserting a jump and add a new fix entry for
-+ it. */
-+static Mfix *
-+create_fix_barrier (Mfix * fix, HOST_WIDE_INT max_address)
-+{
-+ HOST_WIDE_INT count = 0;
-+ rtx barrier;
-+ rtx from = fix->insn;
-+ rtx selected = from;
-+ int selected_cost;
-+ HOST_WIDE_INT selected_address;
-+ Mfix *new_fix;
-+ HOST_WIDE_INT max_count = max_address - fix->address;
-+ rtx label = gen_label_rtx ();
-+
-+ selected_cost = avr32_barrier_cost (from);
-+ selected_address = fix->address;
-+
-+ while (from && count < max_count)
-+ {
-+ rtx tmp;
-+ int new_cost;
-+
-+ /* This code shouldn't have been called if there was a natural barrier
-+ within range. */
-+ if (GET_CODE (from) == BARRIER)
-+ abort ();
-+
-+ /* Count the length of this insn. */
-+ count += get_attr_length (from);
-+
-+ /* If there is a jump table, add its length. */
-+ tmp = is_jump_table (from);
-+ if (tmp != NULL)
-+ {
-+ count += get_jump_table_size (tmp);
-+
-+ /* Jump tables aren't in a basic block, so base the cost on the
-+ dispatch insn. If we select this location, we will still put
-+ the pool after the table. */
-+ new_cost = avr32_barrier_cost (from);
-+
-+ if (count < max_count && new_cost <= selected_cost)
-+ {
-+ selected = tmp;
-+ selected_cost = new_cost;
-+ selected_address = fix->address + count;
-+ }
-+
-+ /* Continue after the dispatch table. */
-+ from = NEXT_INSN (tmp);
-+ continue;
-+ }
-+
-+ new_cost = avr32_barrier_cost (from);
-+
-+ if (count < max_count && new_cost <= selected_cost)
-+ {
-+ selected = from;
-+ selected_cost = new_cost;
-+ selected_address = fix->address + count;
-+ }
-+
-+ from = NEXT_INSN (from);
-+ }
-+
-+ /* Create a new JUMP_INSN that branches around a barrier. */
-+ from = emit_jump_insn_after (gen_jump (label), selected);
-+ JUMP_LABEL (from) = label;
-+ barrier = emit_barrier_after (from);
-+ emit_label_after (label, barrier);
-+
-+ /* Create a minipool barrier entry for the new barrier. */
-+ new_fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*new_fix));
-+ new_fix->insn = barrier;
-+ new_fix->address = selected_address;
-+ new_fix->next = fix->next;
-+ fix->next = new_fix;
-+
-+ return new_fix;
-+}
-+
-+/* Record that there is a natural barrier in the insn stream at
-+ ADDRESS. */
-+static void
-+push_minipool_barrier (rtx insn, HOST_WIDE_INT address)
-+ {
-+ Mfix *fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*fix));
-+
-+ fix->insn = insn;
-+ fix->address = address;
-+
-+ fix->next = NULL;
-+ if (minipool_fix_head != NULL)
-+ minipool_fix_tail->next = fix;
-+ else
-+ minipool_fix_head = fix;
-+
-+ minipool_fix_tail = fix;
-+ }
-+
-+/* Record INSN, which will need fixing up to load a value from the
-+ minipool. ADDRESS is the offset of the insn since the start of the
-+ function; LOC is a pointer to the part of the insn which requires
-+ fixing; VALUE is the constant that must be loaded, which is of type
-+ MODE. */
-+static void
-+push_minipool_fix (rtx insn, HOST_WIDE_INT address, rtx * loc,
-+ enum machine_mode mode, rtx value)
-+ {
-+ Mfix *fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*fix));
-+ rtx body = PATTERN (insn);
-+
-+ fix->insn = insn;
-+ fix->address = address;
-+ fix->loc = loc;
-+ fix->mode = mode;
-+ fix->fix_size = MINIPOOL_FIX_SIZE (mode, value);
-+ fix->value = value;
-+
-+ if (GET_CODE (body) == PARALLEL)
-+ {
-+ /* Mcall : Ks16 << 2 */
-+ fix->forwards = ((1 << 15) - 1) << 2;
-+ fix->backwards = (1 << 15) << 2;
-+ }
-+ else if (GET_CODE (body) == SET
-+ && GET_MODE_SIZE (GET_MODE (SET_DEST (body))) == 4)
-+ {
-+ /* Word Load */
-+ if (TARGET_HARD_FLOAT
-+ && GET_MODE_CLASS (GET_MODE (SET_DEST (body))) == MODE_FLOAT)
-+ {
-+ /* Ldc0.w : Ku12 << 2 */
-+ fix->forwards = ((1 << 12) - 1) << 2;
-+ fix->backwards = 0;
-+ }
-+ else
-+ {
-+ if (optimize_size)
-+ {
-+ /* Lddpc : Ku7 << 2 */
-+ fix->forwards = ((1 << 7) - 1) << 2;
-+ fix->backwards = 0;
-+ }
-+ else
-+ {
-+ /* Ld.w : Ks16 */
-+ fix->forwards = ((1 << 15) - 4);
-+ fix->backwards = (1 << 15);
-+ }
-+ }
-+ }
-+ else if (GET_CODE (body) == SET
-+ && GET_MODE_SIZE (GET_MODE (SET_DEST (body))) == 8)
-+ {
-+ /* Double word load */
-+ if (TARGET_HARD_FLOAT
-+ && GET_MODE_CLASS (GET_MODE (SET_DEST (body))) == MODE_FLOAT)
-+ {
-+ /* Ldc0.d : Ku12 << 2 */
-+ fix->forwards = ((1 << 12) - 1) << 2;
-+ fix->backwards = 0;
-+ }
-+ else
-+ {
-+ /* Ld.d : Ks16 */
-+ fix->forwards = ((1 << 15) - 4);
-+ fix->backwards = (1 << 15);
-+ }
-+ }
-+ else if (GET_CODE (body) == UNSPEC_VOLATILE
-+ && XINT (body, 1) == VUNSPEC_MVRC)
-+ {
-+ /* Coprocessor load */
-+ /* Ldc : Ku8 << 2 */
-+ fix->forwards = ((1 << 8) - 1) << 2;
-+ fix->backwards = 0;
-+ }
-+ else
-+ {
-+ /* Assume worst case which is lddpc insn. */
-+ fix->forwards = ((1 << 7) - 1) << 2;
-+ fix->backwards = 0;
-+ }
-+
-+ fix->minipool = NULL;
-+
-+ /* If an insn doesn't have a range defined for it, then it isn't expecting
-+ to be reworked by this code. Better to abort now than to generate duff
-+ assembly code. */
-+ if (fix->forwards == 0 && fix->backwards == 0)
-+ abort ();
-+
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; %smode fixup for i%d; addr %lu, range (%ld,%ld): ",
-+ GET_MODE_NAME (mode),
-+ INSN_UID (insn), (unsigned long) address,
-+ -1 * (long) fix->backwards, (long) fix->forwards);
-+ avr32_print_value (dump_file, fix->value);
-+ fprintf (dump_file, "\n");
-+ }
-+
-+ /* Add it to the chain of fixes. */
-+ fix->next = NULL;
-+
-+ if (minipool_fix_head != NULL)
-+ minipool_fix_tail->next = fix;
-+ else
-+ minipool_fix_head = fix;
-+
-+ minipool_fix_tail = fix;
-+ }
-+
-+/* Scan INSN and note any of its operands that need fixing.
-+ If DO_PUSHES is false we do not actually push any of the fixups
-+ needed. The function returns TRUE is any fixups were needed/pushed.
-+ This is used by avr32_memory_load_p() which needs to know about loads
-+ of constants that will be converted into minipool loads. */
-+static bool
-+note_invalid_constants (rtx insn, HOST_WIDE_INT address, int do_pushes)
-+ {
-+ bool result = false;
-+ int opno;
-+
-+ extract_insn (insn);
-+
-+ if (!constrain_operands (1))
-+ fatal_insn_not_found (insn);
-+
-+ if (recog_data.n_alternatives == 0)
-+ return false;
-+
-+ /* Fill in recog_op_alt with information about the constraints of this
-+ insn. */
-+ preprocess_constraints ();
-+
-+ for (opno = 0; opno < recog_data.n_operands; opno++)
-+ {
-+ rtx op;
-+
-+ /* Things we need to fix can only occur in inputs. */
-+ if (recog_data.operand_type[opno] != OP_IN)
-+ continue;
-+
-+ op = recog_data.operand[opno];
-+
-+ if (avr32_const_pool_ref_operand (op, GET_MODE (op)))
-+ {
-+ if (do_pushes)
-+ {
-+ rtx cop = avoid_constant_pool_reference (op);
-+
-+ /* Casting the address of something to a mode narrower than a
-+ word can cause avoid_constant_pool_reference() to return the
-+ pool reference itself. That's no good to us here. Lets
-+ just hope that we can use the constant pool value directly.
-+ */
-+ if (op == cop)
-+ cop = get_pool_constant (XEXP (op, 0));
-+
-+ push_minipool_fix (insn, address,
-+ recog_data.operand_loc[opno],
-+ recog_data.operand_mode[opno], cop);
-+ }
-+
-+ result = true;
-+ }
-+ else if (TARGET_HAS_ASM_ADDR_PSEUDOS
-+ && avr32_address_operand (op, GET_MODE (op)))
-+ {
-+ /* Handle pseudo instructions using a direct address. These pseudo
-+ instructions might need entries in the constant pool and we must
-+ therefor create a constant pool for them, in case the
-+ assembler/linker needs to insert entries. */
-+ if (do_pushes)
-+ {
-+ /* Push a dummy constant pool entry so that the .cpool
-+ directive should be inserted on the appropriate place in the
-+ code even if there are no real constant pool entries. This
-+ is used by the assembler and linker to know where to put
-+ generated constant pool entries. */
-+ push_minipool_fix (insn, address,
-+ recog_data.operand_loc[opno],
-+ recog_data.operand_mode[opno],
-+ gen_rtx_UNSPEC (VOIDmode,
-+ gen_rtvec (1, const0_rtx),
-+ UNSPEC_FORCE_MINIPOOL));
-+ result = true;
-+ }
-+ }
-+ }
-+ return result;
-+ }
-+
-+
-+static int
-+avr32_insn_is_cast (rtx insn)
-+ {
-+
-+ if (NONJUMP_INSN_P (insn)
-+ && GET_CODE (PATTERN (insn)) == SET
-+ && (GET_CODE (SET_SRC (PATTERN (insn))) == ZERO_EXTEND
-+ || GET_CODE (SET_SRC (PATTERN (insn))) == SIGN_EXTEND)
-+ && REG_P (XEXP (SET_SRC (PATTERN (insn)), 0))
-+ && REG_P (SET_DEST (PATTERN (insn))))
-+ return true;
-+ return false;
-+ }
-+
-+/* FIXME: The level of nesting in this function is way too deep. It needs to be
-+ torn apart. */
-+static void
-+avr32_reorg_optimization (void)
-+ {
-+ rtx first = get_insns ();
-+ rtx insn;
-+
-+ if (TARGET_MD_REORG_OPTIMIZATION && (optimize_size || (optimize > 0)))
-+ {
-+
-+ /* Scan through all insns looking for cast operations. */
-+ if (dump_file)
-+ {
-+ fprintf (dump_file, ";; Deleting redundant cast operations:\n");
-+ }
-+ for (insn = first; insn; insn = NEXT_INSN (insn))
-+ {
-+ rtx reg, src_reg, scan;
-+ enum machine_mode mode;
-+ int unused_cast;
-+ rtx label_ref;
-+
-+ if (avr32_insn_is_cast (insn)
-+ && (GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == QImode
-+ || GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == HImode))
-+ {
-+ mode = GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0));
-+ reg = SET_DEST (PATTERN (insn));
-+ src_reg = XEXP (SET_SRC (PATTERN (insn)), 0);
-+ }
-+ else
-+ {
-+ continue;
-+ }
-+
-+ unused_cast = false;
-+ label_ref = NULL_RTX;
-+ for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+ {
-+ /* Check if we have reached the destination of a simple
-+ conditional jump which we have already scanned past. If so,
-+ we can safely continue scanning. */
-+ if (LABEL_P (scan) && label_ref != NULL_RTX)
-+ {
-+ if (CODE_LABEL_NUMBER (scan) ==
-+ CODE_LABEL_NUMBER (XEXP (label_ref, 0)))
-+ label_ref = NULL_RTX;
-+ else
-+ break;
-+ }
-+
-+ if (!INSN_P (scan))
-+ continue;
-+
-+ /* For conditional jumps we can manage to keep on scanning if
-+ we meet the destination label later on before any new jump
-+ insns occure. */
-+ if (GET_CODE (scan) == JUMP_INSN)
-+ {
-+ if (any_condjump_p (scan) && label_ref == NULL_RTX)
-+ label_ref = condjump_label (scan);
-+ else
-+ break;
-+ }
-+
-+ if (!reg_mentioned_p (reg, PATTERN (scan)))
-+ continue;
-+
-+ /* Check if casted register is used in this insn */
-+ if ((regno_use_in (REGNO (reg), PATTERN (scan)) != NULL_RTX)
-+ && (GET_MODE (regno_use_in (REGNO (reg), PATTERN (scan))) ==
-+ GET_MODE (reg)))
-+ {
-+ /* If not used in the source to the set or in a memory
-+ expression in the destiantion then the register is used
-+ as a destination and is really dead. */
-+ if (single_set (scan)
-+ && GET_CODE (PATTERN (scan)) == SET
-+ && REG_P (SET_DEST (PATTERN (scan)))
-+ && !regno_use_in (REGNO (reg), SET_SRC (PATTERN (scan)))
-+ && label_ref == NULL_RTX)
-+ {
-+ unused_cast = true;
-+ }
-+ break;
-+ }
-+
-+ /* Check if register is dead or set in this insn */
-+ if (dead_or_set_p (scan, reg))
-+ {
-+ unused_cast = true;
-+ break;
-+ }
-+ }
-+
-+ /* Check if we have unresolved conditional jumps */
-+ if (label_ref != NULL_RTX)
-+ continue;
-+
-+ if (unused_cast)
-+ {
-+ if (REGNO (reg) == REGNO (XEXP (SET_SRC (PATTERN (insn)), 0)))
-+ {
-+ /* One operand cast, safe to delete */
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; INSN %i removed, casted register %i value not used.\n",
-+ INSN_UID (insn), REGNO (reg));
-+ }
-+ SET_INSN_DELETED (insn);
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (insn) = -1;
-+ }
-+ else
-+ {
-+ /* Two operand cast, which really could be substituted with
-+ a move, if the source register is dead after the cast
-+ insn and then the insn which sets the source register
-+ could instead directly set the destination register for
-+ the cast. As long as there are no insns in between which
-+ uses the register. */
-+ rtx link = NULL_RTX;
-+ rtx set;
-+ rtx src_reg = XEXP (SET_SRC (PATTERN (insn)), 0);
-+ unused_cast = false;
-+
-+ if (!find_reg_note (insn, REG_DEAD, src_reg))
-+ continue;
-+
-+ /* Search for the insn which sets the source register */
-+ for (link = LOG_LINKS (insn); link; link = XEXP (link, 1))
-+ {
-+ if (REG_NOTE_KIND (link) != 0)
-+ continue;
-+ set = single_set (XEXP (link, 0));
-+ if (set && rtx_equal_p (src_reg, SET_DEST (set)))
-+ {
-+ link = XEXP (link, 0);
-+ break;
-+ }
-+ }
-+
-+ /* Found no link or link is a call insn where we can not
-+ change the destination register */
-+ if (link == NULL_RTX || CALL_P (link))
-+ continue;
-+
-+ /* Scan through all insn between link and insn */
-+ for (scan = NEXT_INSN (link); scan; scan = NEXT_INSN (scan))
-+ {
-+ /* Don't try to trace forward past a CODE_LABEL if we
-+ haven't seen INSN yet. Ordinarily, we will only
-+ find the setting insn in LOG_LINKS if it is in the
-+ same basic block. However, cross-jumping can insert
-+ code labels in between the load and the call, and
-+ can result in situations where a single call insn
-+ may have two targets depending on where we came
-+ from. */
-+
-+ if (GET_CODE (scan) == CODE_LABEL)
-+ break;
-+
-+ if (!INSN_P (scan))
-+ continue;
-+
-+ /* Don't try to trace forward past a JUMP. To optimize
-+ safely, we would have to check that all the
-+ instructions at the jump destination did not use REG.
-+ */
-+
-+ if (GET_CODE (scan) == JUMP_INSN)
-+ {
-+ break;
-+ }
-+
-+ if (!reg_mentioned_p (src_reg, PATTERN (scan)))
-+ continue;
-+
-+ /* We have reached the cast insn */
-+ if (scan == insn)
-+ {
-+ /* We can remove cast and replace the destination
-+ register of the link insn with the destination
-+ of the cast */
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; INSN %i removed, casted value unused. "
-+ "Destination of removed cast operation: register %i, folded into INSN %i.\n",
-+ INSN_UID (insn), REGNO (reg),
-+ INSN_UID (link));
-+ }
-+ /* Update link insn */
-+ SET_DEST (PATTERN (link)) =
-+ gen_rtx_REG (mode, REGNO (reg));
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (link) = -1;
-+
-+ /* Delete insn */
-+ SET_INSN_DELETED (insn);
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (insn) = -1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ }
-+ }
-+
-+ if (TARGET_MD_REORG_OPTIMIZATION && (optimize_size || (optimize > 0)))
-+ {
-+
-+ /* Scan through all insns looking for shifted add operations */
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; Deleting redundant shifted add operations:\n");
-+ }
-+ for (insn = first; insn; insn = NEXT_INSN (insn))
-+ {
-+ rtx reg, mem_expr, scan, op0, op1;
-+ int add_only_used_as_pointer;
-+
-+ if (INSN_P (insn)
-+ && GET_CODE (PATTERN (insn)) == SET
-+ && GET_CODE (SET_SRC (PATTERN (insn))) == PLUS
-+ && (GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == MULT
-+ || GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == ASHIFT)
-+ && GET_CODE (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 1)) ==
-+ CONST_INT && REG_P (SET_DEST (PATTERN (insn)))
-+ && REG_P (XEXP (SET_SRC (PATTERN (insn)), 1))
-+ && REG_P (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 0)))
-+ {
-+ reg = SET_DEST (PATTERN (insn));
-+ mem_expr = SET_SRC (PATTERN (insn));
-+ op0 = XEXP (XEXP (mem_expr, 0), 0);
-+ op1 = XEXP (mem_expr, 1);
-+ }
-+ else
-+ {
-+ continue;
-+ }
-+
-+ /* Scan forward the check if the result of the shifted add
-+ operation is only used as an address in memory operations and
-+ that the operands to the shifted add are not clobbered. */
-+ add_only_used_as_pointer = false;
-+ for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+ {
-+ if (!INSN_P (scan))
-+ continue;
-+
-+ /* Don't try to trace forward past a JUMP or CALL. To optimize
-+ safely, we would have to check that all the instructions at
-+ the jump destination did not use REG. */
-+
-+ if (GET_CODE (scan) == JUMP_INSN)
-+ {
-+ break;
-+ }
-+
-+ /* If used in a call insn then we cannot optimize it away */
-+ if (CALL_P (scan) && find_regno_fusage (scan, USE, REGNO (reg)))
-+ break;
-+
-+ /* If any of the operands of the shifted add are clobbered we
-+ cannot optimize the shifted adda away */
-+ if ((reg_set_p (op0, scan) && (REGNO (op0) != REGNO (reg)))
-+ || (reg_set_p (op1, scan) && (REGNO (op1) != REGNO (reg))))
-+ break;
-+
-+ if (!reg_mentioned_p (reg, PATTERN (scan)))
-+ continue;
-+
-+ /* If used any other place than as a pointer or as the
-+ destination register we failed */
-+ if (!(single_set (scan)
-+ && GET_CODE (PATTERN (scan)) == SET
-+ && ((MEM_P (SET_DEST (PATTERN (scan)))
-+ && REG_P (XEXP (SET_DEST (PATTERN (scan)), 0))
-+ && REGNO (XEXP (SET_DEST (PATTERN (scan)), 0)) ==
-+ REGNO (reg)) || (MEM_P (SET_SRC (PATTERN (scan)))
-+ &&
-+ REG_P (XEXP
-+ (SET_SRC (PATTERN (scan)),
-+ 0))
-+ &&
-+ REGNO (XEXP
-+ (SET_SRC (PATTERN (scan)),
-+ 0)) == REGNO (reg))))
-+ && !(GET_CODE (PATTERN (scan)) == SET
-+ && REG_P (SET_DEST (PATTERN (scan)))
-+ && !regno_use_in (REGNO (reg),
-+ SET_SRC (PATTERN (scan)))))
-+ break;
-+
-+ /* Check if register is dead or set in this insn */
-+ if (dead_or_set_p (scan, reg))
-+ {
-+ add_only_used_as_pointer = true;
-+ break;
-+ }
-+ }
-+
-+ if (add_only_used_as_pointer)
-+ {
-+ /* Lets delete the add insn and replace all memory references
-+ which uses the pointer with the full expression. */
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; Deleting INSN %i since address expression can be folded into all "
-+ "memory references using this expression\n",
-+ INSN_UID (insn));
-+ }
-+ SET_INSN_DELETED (insn);
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (insn) = -1;
-+
-+ for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+ {
-+ if (!INSN_P (scan))
-+ continue;
-+
-+ if (!reg_mentioned_p (reg, PATTERN (scan)))
-+ continue;
-+
-+ /* If used any other place than as a pointer or as the
-+ destination register we failed */
-+ if ((single_set (scan)
-+ && GET_CODE (PATTERN (scan)) == SET
-+ && ((MEM_P (SET_DEST (PATTERN (scan)))
-+ && REG_P (XEXP (SET_DEST (PATTERN (scan)), 0))
-+ && REGNO (XEXP (SET_DEST (PATTERN (scan)), 0)) ==
-+ REGNO (reg)) || (MEM_P (SET_SRC (PATTERN (scan)))
-+ &&
-+ REG_P (XEXP
-+ (SET_SRC (PATTERN (scan)),
-+ 0))
-+ &&
-+ REGNO (XEXP
-+ (SET_SRC (PATTERN (scan)),
-+ 0)) == REGNO (reg)))))
-+ {
-+ if (dump_file)
-+ {
-+ fprintf (dump_file,
-+ ";; Register %i replaced by indexed address in INSN %i\n",
-+ REGNO (reg), INSN_UID (scan));
-+ }
-+ if (MEM_P (SET_DEST (PATTERN (scan))))
-+ XEXP (SET_DEST (PATTERN (scan)), 0) = mem_expr;
-+ else
-+ XEXP (SET_SRC (PATTERN (scan)), 0) = mem_expr;
-+ }
-+
-+ /* Check if register is dead or set in this insn */
-+ if (dead_or_set_p (scan, reg))
-+ {
-+ break;
-+ }
-+
-+ }
-+ }
-+ }
-+ }
-+ }
-+
-+/* Exported to toplev.c.
-+
-+ Do a final pass over the function, just before delayed branch
-+ scheduling. */
-+
-+static void
-+avr32_reorg (void)
-+ {
-+ rtx insn;
-+ HOST_WIDE_INT address = 0;
-+ Mfix *fix;
-+
-+ minipool_fix_head = minipool_fix_tail = NULL;
-+
-+ /* The first insn must always be a note, or the code below won't scan it
-+ properly. */
-+ insn = get_insns ();
-+ if (GET_CODE (insn) != NOTE)
-+ abort ();
-+
-+ /* Scan all the insns and record the operands that will need fixing. */
-+ for (insn = next_nonnote_insn (insn); insn; insn = next_nonnote_insn (insn))
-+ {
-+ if (GET_CODE (insn) == BARRIER)
-+ push_minipool_barrier (insn, address);
-+ else if (INSN_P (insn))
-+ {
-+ rtx table;
-+
-+ note_invalid_constants (insn, address, true);
-+ address += get_attr_length (insn);
-+
-+ /* If the insn is a vector jump, add the size of the table and skip
-+ the table. */
-+ if ((table = is_jump_table (insn)) != NULL)
-+ {
-+ address += get_jump_table_size (table);
-+ insn = table;
-+ }
-+ }
-+ }
-+
-+ fix = minipool_fix_head;
-+
-+ /* Now scan the fixups and perform the required changes. */
-+ while (fix)
-+ {
-+ Mfix *ftmp;
-+ Mfix *fdel;
-+ Mfix *last_added_fix;
-+ Mfix *last_barrier = NULL;
-+ Mfix *this_fix;
-+
-+ /* Skip any further barriers before the next fix. */
-+ while (fix && GET_CODE (fix->insn) == BARRIER)
-+ fix = fix->next;
-+
-+ /* No more fixes. */
-+ if (fix == NULL)
-+ break;
-+
-+ last_added_fix = NULL;
-+
-+ for (ftmp = fix; ftmp; ftmp = ftmp->next)
-+ {
-+ if (GET_CODE (ftmp->insn) == BARRIER)
-+ {
-+ if (ftmp->address >= minipool_vector_head->max_address)
-+ break;
-+
-+ last_barrier = ftmp;
-+ }
-+ else if ((ftmp->minipool = add_minipool_forward_ref (ftmp)) == NULL)
-+ break;
-+
-+ last_added_fix = ftmp; /* Keep track of the last fix added.
-+ */
-+ }
-+
-+ /* If we found a barrier, drop back to that; any fixes that we could
-+ have reached but come after the barrier will now go in the next
-+ mini-pool. */
-+ if (last_barrier != NULL)
-+ {
-+ /* Reduce the refcount for those fixes that won't go into this pool
-+ after all. */
-+ for (fdel = last_barrier->next;
-+ fdel && fdel != ftmp; fdel = fdel->next)
-+ {
-+ fdel->minipool->refcount--;
-+ fdel->minipool = NULL;
-+ }
-+
-+ ftmp = last_barrier;
-+ }
-+ else
-+ {
-+ /* ftmp is first fix that we can't fit into this pool and there no
-+ natural barriers that we could use. Insert a new barrier in the
-+ code somewhere between the previous fix and this one, and
-+ arrange to jump around it. */
-+ HOST_WIDE_INT max_address;
-+
-+ /* The last item on the list of fixes must be a barrier, so we can
-+ never run off the end of the list of fixes without last_barrier
-+ being set. */
-+ if (ftmp == NULL)
-+ abort ();
-+
-+ max_address = minipool_vector_head->max_address;
-+ /* Check that there isn't another fix that is in range that we
-+ couldn't fit into this pool because the pool was already too
-+ large: we need to put the pool before such an instruction. */
-+ if (ftmp->address < max_address)
-+ max_address = ftmp->address;
-+
-+ last_barrier = create_fix_barrier (last_added_fix, max_address);
-+ }
-+
-+ assign_minipool_offsets (last_barrier);
-+
-+ while (ftmp)
-+ {
-+ if (GET_CODE (ftmp->insn) != BARRIER
-+ && ((ftmp->minipool = add_minipool_backward_ref (ftmp))
-+ == NULL))
-+ break;
-+
-+ ftmp = ftmp->next;
-+ }
-+
-+ /* Scan over the fixes we have identified for this pool, fixing them up
-+ and adding the constants to the pool itself. */
-+ for (this_fix = fix; this_fix && ftmp != this_fix;
-+ this_fix = this_fix->next)
-+ if (GET_CODE (this_fix->insn) != BARRIER
-+ /* Do nothing for entries present just to force the insertion of
-+ a minipool. */
-+ && !IS_FORCE_MINIPOOL (this_fix->value))
-+ {
-+ rtx addr = plus_constant (gen_rtx_LABEL_REF (VOIDmode,
-+ minipool_vector_label),
-+ this_fix->minipool->offset);
-+ *this_fix->loc = gen_rtx_MEM (this_fix->mode, addr);
-+ }
-+
-+ dump_minipool (last_barrier->insn);
-+ fix = ftmp;
-+ }
-+
-+ /* Free the minipool memory. */
-+ obstack_free (&minipool_obstack, minipool_startobj);
-+
-+ avr32_reorg_optimization ();
-+ }
-+
-+
-+/*
-+ Hook for doing some final scanning of instructions. Does nothing yet...*/
-+void
-+avr32_final_prescan_insn (rtx insn ATTRIBUTE_UNUSED,
-+ rtx * opvec ATTRIBUTE_UNUSED,
-+ int noperands ATTRIBUTE_UNUSED)
-+ {
-+ return;
-+ }
-+
-+
-+/* Function for changing the condition on the next instruction,
-+ should be used when emmiting compare instructions and
-+ the condition of the next instruction needs to change.
-+ */
-+int
-+set_next_insn_cond (rtx cur_insn, rtx new_cond)
-+ {
-+ rtx next_insn = next_nonnote_insn (cur_insn);
-+ if ((next_insn != NULL_RTX)
-+ && (INSN_P (next_insn))
-+ && (GET_CODE (PATTERN (next_insn)) == SET)
-+ && (GET_CODE (SET_SRC (PATTERN (next_insn))) == IF_THEN_ELSE))
-+ {
-+ /* Branch instructions */
-+ XEXP (SET_SRC (PATTERN (next_insn)), 0) = new_cond;
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (next_insn) = -1;
-+ return TRUE;
-+ }
-+ else if ((next_insn != NULL_RTX)
-+ && (INSN_P (next_insn))
-+ && (GET_CODE (PATTERN (next_insn)) == SET)
-+ && comparison_operator (SET_SRC (PATTERN (next_insn)),
-+ GET_MODE (SET_SRC (PATTERN (next_insn)))))
-+ {
-+ /* scc with no compare */
-+ SET_SRC (PATTERN (next_insn)) = new_cond;
-+ /* Force the instruction to be recognized again */
-+ INSN_CODE (next_insn) = -1;
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+/* Function for obtaining the condition for the next instruction
-+ after cur_insn.
-+ */
-+rtx
-+get_next_insn_cond (rtx cur_insn)
-+ {
-+ rtx next_insn = next_nonnote_insn (cur_insn);
-+ rtx cond = NULL_RTX;
-+ if ((next_insn != NULL_RTX)
-+ && (INSN_P (next_insn))
-+ && (GET_CODE (PATTERN (next_insn)) == SET)
-+ && (GET_CODE (SET_SRC (PATTERN (next_insn))) == IF_THEN_ELSE))
-+ {
-+ /* Branch instructions */
-+ cond = XEXP (SET_SRC (PATTERN (next_insn)), 0);
-+ }
-+ else if ((next_insn != NULL_RTX)
-+ && (INSN_P (next_insn))
-+ && (GET_CODE (PATTERN (next_insn)) == SET)
-+ && comparison_operator (SET_SRC (PATTERN (next_insn)),
-+ GET_MODE (SET_SRC (PATTERN (next_insn)))))
-+ {
-+ /* scc with no compare */
-+ cond = SET_SRC (PATTERN (next_insn));
-+ }
-+
-+ return cond;
-+ }
-+
-+
-+rtx
-+avr32_output_cmp (rtx cond, enum machine_mode mode, rtx op0, rtx op1)
-+ {
-+
-+ rtx new_cond = NULL_RTX;
-+ rtx ops[2];
-+ rtx compare_pattern;
-+ ops[0] = op0;
-+ ops[1] = op1;
-+
-+ compare_pattern = gen_rtx_COMPARE (mode, op0, op1);
-+
-+ new_cond = is_compare_redundant (compare_pattern, cond);
-+
-+ if (new_cond != NULL_RTX)
-+ return new_cond;
-+
-+ /* Insert compare */
-+ switch (mode)
-+ {
-+ case QImode:
-+ output_asm_insn ("cp.b\t%0, %1", ops);
-+ break;
-+ case HImode:
-+ output_asm_insn ("cp.h\t%0, %1", ops);
-+ break;
-+ case SImode:
-+ output_asm_insn ("cp.w\t%0, %1", ops);
-+ break;
-+ case DImode:
-+ if (GET_CODE (op1) != REG)
-+ output_asm_insn ("cp.w\t%0, %1\ncpc\t%m0", ops);
-+ else
-+ output_asm_insn ("cp.w\t%0, %1\ncpc\t%m0, %m1", ops);
-+ break;
-+ default:
-+ internal_error ("Unknown comparison mode");
-+ break;
-+ }
-+
-+ return cond;
-+ }
-+
-+int
-+avr32_load_multiple_operation (rtx op,
-+ enum machine_mode mode ATTRIBUTE_UNUSED)
-+ {
-+ int count = XVECLEN (op, 0);
-+ unsigned int dest_regno;
-+ rtx src_addr;
-+ rtx elt;
-+ int i = 1, base = 0;
-+
-+ if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET)
-+ return 0;
-+
-+ /* Check to see if this might be a write-back. */
-+ if (GET_CODE (SET_SRC (elt = XVECEXP (op, 0, 0))) == PLUS)
-+ {
-+ i++;
-+ base = 1;
-+
-+ /* Now check it more carefully. */
-+ if (GET_CODE (SET_DEST (elt)) != REG
-+ || GET_CODE (XEXP (SET_SRC (elt), 0)) != REG
-+ || GET_CODE (XEXP (SET_SRC (elt), 1)) != CONST_INT
-+ || INTVAL (XEXP (SET_SRC (elt), 1)) != (count - 1) * 4)
-+ return 0;
-+ }
-+
-+ /* Perform a quick check so we don't blow up below. */
-+ if (count <= 1
-+ || GET_CODE (XVECEXP (op, 0, i - 1)) != SET
-+ || GET_CODE (SET_DEST (XVECEXP (op, 0, i - 1))) != REG
-+ || GET_CODE (SET_SRC (XVECEXP (op, 0, i - 1))) != UNSPEC)
-+ return 0;
-+
-+ dest_regno = REGNO (SET_DEST (XVECEXP (op, 0, i - 1)));
-+ src_addr = XEXP (SET_SRC (XVECEXP (op, 0, i - 1)), 0);
-+
-+ for (; i < count; i++)
-+ {
-+ elt = XVECEXP (op, 0, i);
-+
-+ if (GET_CODE (elt) != SET
-+ || GET_CODE (SET_DEST (elt)) != REG
-+ || GET_MODE (SET_DEST (elt)) != SImode
-+ || GET_CODE (SET_SRC (elt)) != UNSPEC)
-+ return 0;
-+ }
-+
-+ return 1;
-+ }
-+
-+int
-+avr32_store_multiple_operation (rtx op,
-+ enum machine_mode mode ATTRIBUTE_UNUSED)
-+ {
-+ int count = XVECLEN (op, 0);
-+ int src_regno;
-+ rtx dest_addr;
-+ rtx elt;
-+ int i = 1;
-+
-+ if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET)
-+ return 0;
-+
-+ /* Perform a quick check so we don't blow up below. */
-+ if (count <= i
-+ || GET_CODE (XVECEXP (op, 0, i - 1)) != SET
-+ || GET_CODE (SET_DEST (XVECEXP (op, 0, i - 1))) != MEM
-+ || GET_CODE (SET_SRC (XVECEXP (op, 0, i - 1))) != UNSPEC)
-+ return 0;
-+
-+ src_regno = REGNO (SET_SRC (XVECEXP (op, 0, i - 1)));
-+ dest_addr = XEXP (SET_DEST (XVECEXP (op, 0, i - 1)), 0);
-+
-+ for (; i < count; i++)
-+ {
-+ elt = XVECEXP (op, 0, i);
-+
-+ if (GET_CODE (elt) != SET
-+ || GET_CODE (SET_DEST (elt)) != MEM
-+ || GET_MODE (SET_DEST (elt)) != SImode
-+ || GET_CODE (SET_SRC (elt)) != UNSPEC)
-+ return 0;
-+ }
-+
-+ return 1;
-+ }
-+
-+int
-+avr32_valid_macmac_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /* Check if they use the same accumulator */
-+ if (rtx_equal_p
-+ (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+ {
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+int
-+avr32_valid_mulmac_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /*
-+ Check if the mul instruction produces the accumulator for the mac
-+ instruction. */
-+ if (rtx_equal_p
-+ (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+ {
-+ return TRUE;
-+ }
-+ return FALSE;
-+ }
-+
-+int
-+avr32_store_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /* Only valid bypass if the output result is used as an src in the store
-+ instruction, NOT if used as a pointer or base. */
-+ if (rtx_equal_p
-+ (SET_DEST (PATTERN (insn_out)), SET_SRC (PATTERN (insn_in))))
-+ {
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+int
-+avr32_mul_waw_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /* Check if the register holding the result from the mul instruction is
-+ used as a result register in the input instruction. */
-+ if (rtx_equal_p
-+ (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+ {
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+int
-+avr32_valid_load_double_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /* Check if the first loaded word in insn_out is used in insn_in. */
-+ rtx dst_reg;
-+ rtx second_loaded_reg;
-+
-+ /* If this is a double alu operation then the bypass is not valid */
-+ if ((get_attr_type (insn_in) == TYPE_ALU
-+ || get_attr_type (insn_in) == TYPE_ALU2)
-+ && (GET_MODE_SIZE (GET_MODE (SET_DEST (PATTERN (insn_out)))) > 4))
-+ return FALSE;
-+
-+ /* Get the destination register in the load */
-+ if (!REG_P (SET_DEST (PATTERN (insn_out))))
-+ return FALSE;
-+
-+ dst_reg = SET_DEST (PATTERN (insn_out));
-+ second_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 1);
-+
-+ if (!reg_mentioned_p (second_loaded_reg, PATTERN (insn_in)))
-+ return TRUE;
-+
-+ return FALSE;
-+ }
-+
-+
-+int
-+avr32_valid_load_quad_bypass (rtx insn_out, rtx insn_in)
-+ {
-+ /*
-+ Check if the two first loaded word in insn_out are used in insn_in. */
-+ rtx dst_reg;
-+ rtx third_loaded_reg, fourth_loaded_reg;
-+
-+ /* Get the destination register in the load */
-+ if (!REG_P (SET_DEST (PATTERN (insn_out))))
-+ return FALSE;
-+
-+ dst_reg = SET_DEST (PATTERN (insn_out));
-+ third_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 2);
-+ fourth_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 3);
-+
-+ if (!reg_mentioned_p (third_loaded_reg, PATTERN (insn_in))
-+ && !reg_mentioned_p (fourth_loaded_reg, PATTERN (insn_in)))
-+ {
-+ return TRUE;
-+ }
-+
-+ return FALSE;
-+ }
-+
-+
-+//section *
-+//avr32_select_rtx_section (enum machine_mode mode ATTRIBUTE_UNUSED,
-+// rtx x ATTRIBUTE_UNUSED,
-+// unsigned HOST_WIDE_INT align ATTRIBUTE_UNUSED)
-+// {
-+// /* Let ASM_OUTPUT_POOL_PROLOGUE take care of this */
-+// return 0;
-+// }
-+
-+
-+/* Function for getting an integer value from a const_int or const_double
-+ expression regardless of the HOST_WIDE_INT size. Each target cpu word
-+ will be put into the val array where the LSW will be stored at the lowest
-+ address and so forth. Assumes that const_expr is either a const_int or
-+ const_double. Only valid for modes which have sizes that are a multiple
-+ of the word size.
-+*/
-+void
-+avr32_get_intval (enum machine_mode mode,
-+ rtx const_expr,
-+ HOST_WIDE_INT *val)
-+{
-+ int words_in_mode = GET_MODE_SIZE (mode)/UNITS_PER_WORD;
-+ const int words_in_const_int = HOST_BITS_PER_WIDE_INT / BITS_PER_WORD;
-+
-+ if ( GET_CODE(const_expr) == CONST_DOUBLE ){
-+ HOST_WIDE_INT hi = CONST_DOUBLE_HIGH(const_expr);
-+ HOST_WIDE_INT lo = CONST_DOUBLE_LOW(const_expr);
-+ /* Evaluate hi and lo values of const_double. */
-+ avr32_get_intval (mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0),
-+ GEN_INT (lo),
-+ &val[0]);
-+ avr32_get_intval (mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0),
-+ GEN_INT (hi),
-+ &val[words_in_const_int]);
-+ } else if ( GET_CODE(const_expr) == CONST_INT ){
-+ HOST_WIDE_INT value = INTVAL(const_expr);
-+ int word;
-+ for ( word = 0; (word < words_in_mode) && (word < words_in_const_int); word++ ){
-+ /* Shift word up to the MSW and shift down again to extract the
-+ word and sign-extend. */
-+ int lshift = (words_in_const_int - word - 1) * BITS_PER_WORD;
-+ int rshift = (words_in_const_int-1) * BITS_PER_WORD;
-+ val[word] = (value << lshift) >> rshift;
-+ }
-+
-+ for ( ; word < words_in_mode; word++ ){
-+ /* Just put the sign bits in the remaining words. */
-+ val[word] = value < 0 ? -1 : 0;
-+ }
-+ }
-+}
-+
-+void
-+avr32_split_const_expr (enum machine_mode mode,
-+ enum machine_mode new_mode,
-+ rtx expr,
-+ rtx *split_expr)
-+{
-+ int i, word;
-+ int words_in_intval = GET_MODE_SIZE (mode)/UNITS_PER_WORD;
-+ int words_in_split_values = GET_MODE_SIZE (new_mode)/UNITS_PER_WORD;
-+ const int words_in_const_int = HOST_BITS_PER_WIDE_INT / BITS_PER_WORD;
-+ HOST_WIDE_INT *val = alloca (words_in_intval * UNITS_PER_WORD);
-+
-+ avr32_get_intval (mode, expr, val);
-+
-+ for ( i=0; i < (words_in_intval/words_in_split_values); i++ )
-+ {
-+ HOST_WIDE_INT value_lo = 0, value_hi = 0;
-+ for ( word = 0; word < words_in_split_values; word++ )
-+ {
-+ if ( word >= words_in_const_int )
-+ value_hi |= ((val[i * words_in_split_values + word] &
-+ (((HOST_WIDE_INT)1 << BITS_PER_WORD)-1))
-+ << (BITS_PER_WORD * (word - words_in_const_int)));
-+ else
-+ value_lo |= ((val[i * words_in_split_values + word] &
-+ (((HOST_WIDE_INT)1 << BITS_PER_WORD)-1))
-+ << (BITS_PER_WORD * word));
-+ }
-+ split_expr[i] = immed_double_const(value_lo, value_hi, new_mode);
-+ }
-+}
-+
-+
-+
-+/* Set up library functions to comply to AVR32 ABI */
-+
-+
-+/* Set up library functions to comply to AVR32 ABI */
-+
-+static void
-+avr32_init_libfuncs (void)
-+{
-+ /* Convert gcc run-time function names to AVR32 ABI names */
-+
-+ /* Double-precision floating-point arithmetic. */
-+ set_optab_libfunc (sdiv_optab, DFmode, "__avr32_f64_div");
-+ set_optab_libfunc (smul_optab, DFmode, "__avr32_f64_mul");
-+ set_optab_libfunc (neg_optab, DFmode, NULL);
-+
-+ /* Double-precision comparisons. */
-+ set_optab_libfunc (eq_optab, DFmode, "__avr32_f64_cmp_eq");
-+ set_optab_libfunc (ne_optab, DFmode, NULL);
-+ set_optab_libfunc (lt_optab, DFmode, "__avr32_f64_cmp_lt");
-+ set_optab_libfunc (le_optab, DFmode, NULL);
-+ set_optab_libfunc (ge_optab, DFmode, "__avr32_f64_cmp_ge");
-+ set_optab_libfunc (gt_optab, DFmode, NULL);
-+
-+ /* Single-precision floating-point arithmetic. */
-+ set_optab_libfunc (smul_optab, SFmode, "__avr32_f32_mul");
-+ set_optab_libfunc (neg_optab, SFmode, NULL);
-+
-+ /* Single-precision comparisons. */
-+ set_optab_libfunc (eq_optab, SFmode, "__avr32_f32_cmp_eq");
-+ set_optab_libfunc (ne_optab, SFmode, NULL);
-+ set_optab_libfunc (lt_optab, SFmode, "__avr32_f32_cmp_lt");
-+ set_optab_libfunc (le_optab, SFmode, NULL);
-+ set_optab_libfunc (ge_optab, SFmode, "__avr32_f32_cmp_ge");
-+ set_optab_libfunc (gt_optab, SFmode, NULL);
-+
-+ /* Floating-point to integer conversions. */
-+ set_conv_libfunc (sfix_optab, SImode, DFmode, "__avr32_f64_to_s32");
-+ set_conv_libfunc (ufix_optab, SImode, DFmode, "__avr32_f64_to_u32");
-+ set_conv_libfunc (sfix_optab, DImode, DFmode, "__avr32_f64_to_s64");
-+ set_conv_libfunc (ufix_optab, DImode, DFmode, "__avr32_f64_to_u64");
-+ set_conv_libfunc (sfix_optab, SImode, SFmode, "__avr32_f32_to_s32");
-+ set_conv_libfunc (ufix_optab, SImode, SFmode, "__avr32_f32_to_u32");
-+ set_conv_libfunc (sfix_optab, DImode, SFmode, "__avr32_f32_to_s64");
-+ set_conv_libfunc (ufix_optab, DImode, SFmode, "__avr32_f32_to_u64");
-+
-+ /* Conversions between floating types. */
-+ set_conv_libfunc (trunc_optab, SFmode, DFmode, "__avr32_f64_to_f32");
-+ set_conv_libfunc (sext_optab, DFmode, SFmode, "__avr32_f32_to_f64");
-+
-+ /* Integer to floating-point conversions. Table 8. */
-+ set_conv_libfunc (sfloat_optab, DFmode, SImode, "__avr32_s32_to_f64");
-+ set_conv_libfunc (sfloat_optab, DFmode, DImode, "__avr32_s64_to_f64");
-+ set_conv_libfunc (sfloat_optab, SFmode, SImode, "__avr32_s32_to_f32");
-+ set_conv_libfunc (sfloat_optab, SFmode, DImode, "__avr32_s64_to_f32");
-+ set_conv_libfunc (ufloat_optab, DFmode, SImode, "__avr32_u32_to_f64");
-+ set_conv_libfunc (ufloat_optab, SFmode, SImode, "__avr32_u32_to_f32");
-+ /* TODO: Add these to gcc library functions */
-+ //set_conv_libfunc (ufloat_optab, DFmode, DImode, NULL);
-+ //set_conv_libfunc (ufloat_optab, SFmode, DImode, NULL);
-+
-+ /* Long long. Table 9. */
-+ set_optab_libfunc (smul_optab, DImode, "__avr32_mul64");
-+ set_optab_libfunc (sdiv_optab, DImode, "__avr32_sdiv64");
-+ set_optab_libfunc (udiv_optab, DImode, "__avr32_udiv64");
-+ set_optab_libfunc (smod_optab, DImode, "__avr32_smod64");
-+ set_optab_libfunc (umod_optab, DImode, "__avr32_umod64");
-+ set_optab_libfunc (ashl_optab, DImode, "__avr32_lsl64");
-+ set_optab_libfunc (lshr_optab, DImode, "__avr32_lsr64");
-+ set_optab_libfunc (ashr_optab, DImode, "__avr32_asr64");
-+
-+ /* Floating point library functions which have fast versions. */
-+ if ( TARGET_FAST_FLOAT )
-+ {
-+ set_optab_libfunc (add_optab, DFmode, "__avr32_f64_add_fast");
-+ set_optab_libfunc (sub_optab, DFmode, "__avr32_f64_sub_fast");
-+ set_optab_libfunc (add_optab, SFmode, "__avr32_f32_add_fast");
-+ set_optab_libfunc (sub_optab, SFmode, "__avr32_f32_sub_fast");
-+ set_optab_libfunc (sdiv_optab, SFmode, "__avr32_f32_div_fast");
-+ }
-+ else
-+ {
-+ set_optab_libfunc (add_optab, DFmode, "__avr32_f64_add");
-+ set_optab_libfunc (sub_optab, DFmode, "__avr32_f64_sub");
-+ set_optab_libfunc (add_optab, SFmode, "__avr32_f32_add");
-+ set_optab_libfunc (sub_optab, SFmode, "__avr32_f32_sub");
-+ set_optab_libfunc (sdiv_optab, SFmode, "__avr32_f32_div");
-+ }
-+}
-+
-Index: gcc-4.2.3/gcc/config/avr32/avr32-elf.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32-elf.h 2008-05-21 13:45:54.149288905 +0200
-@@ -0,0 +1,84 @@
-+/*
-+ Elf specific definitions.
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+/*****************************************************************************
-+ * Controlling the Compilator Driver, 'gcc'
-+ *****************************************************************************/
-+
-+/* Run-time Target Specification. */
-+#undef TARGET_VERSION
-+#define TARGET_VERSION fputs (" (AVR32 GNU with ELF)", stderr);
-+
-+/*
-+Another C string constant used much like LINK_SPEC. The
-+difference between the two is that STARTFILE_SPEC is used at
-+the very beginning of the command given to the linker.
-+
-+If this macro is not defined, a default is provided that loads the
-+standard C startup file from the usual place. See gcc.c.
-+*/
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC "crt0%O%s crti%O%s crtbegin%O%s"
-+
-+#undef LINK_SPEC
-+#define LINK_SPEC "%{muse-oscall:--defsym __do_not_use_oscall_coproc__=0} %{mrelax|O*:%{mno-relax|O0|O1: ;:--relax}} %{mpart=*:-mavr32elf_%*} %{mcpu=*:-mavr32elf_%*}"
-+
-+
-+/*
-+Another C string constant used much like LINK_SPEC. The
-+difference between the two is that ENDFILE_SPEC is used at
-+the very end of the command given to the linker.
-+
-+Do not define this macro if it does not need to do anything.
-+*/
-+#undef ENDFILE_SPEC
-+#define ENDFILE_SPEC "crtend%O%s crtn%O%s"
-+
-+
-+/* Target CPU builtins. */
-+#define TARGET_CPU_CPP_BUILTINS() \
-+ do \
-+ { \
-+ builtin_define ("__avr32__"); \
-+ builtin_define ("__AVR32__"); \
-+ builtin_define ("__AVR32_ELF__"); \
-+ builtin_define (avr32_part->macro); \
-+ builtin_define (avr32_arch->macro); \
-+ if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A) \
-+ builtin_define ("__AVR32_AVR32A__"); \
-+ else \
-+ builtin_define ("__AVR32_AVR32B__"); \
-+ if (TARGET_UNALIGNED_WORD) \
-+ builtin_define ("__AVR32_HAS_UNALIGNED_WORD__"); \
-+ if (TARGET_SIMD) \
-+ builtin_define ("__AVR32_HAS_SIMD__"); \
-+ if (TARGET_DSP) \
-+ builtin_define ("__AVR32_HAS_DSP__"); \
-+ if (TARGET_RMW) \
-+ builtin_define ("__AVR32_HAS_RMW__"); \
-+ if (TARGET_BRANCH_PRED) \
-+ builtin_define ("__AVR32_HAS_BRANCH_PRED__"); \
-+ if (TARGET_FAST_FLOAT) \
-+ builtin_define ("__AVR32_FAST_FLOAT__"); \
-+ } \
-+ while (0)
-Index: gcc-4.2.3/gcc/config/avr32/avr32.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32.h 2008-05-21 13:45:54.157287690 +0200
-@@ -0,0 +1,3281 @@
-+/*
-+ Definitions of target machine for AVR32.
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+ Initial porting by Anders �dland.
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#ifndef GCC_AVR32_H
-+#define GCC_AVR32_H
-+
-+
-+#ifndef OBJECT_FORMAT_ELF
-+#error avr32.h included before elfos.h
-+#endif
-+
-+#ifndef LOCAL_LABEL_PREFIX
-+#define LOCAL_LABEL_PREFIX "."
-+#endif
-+
-+#ifndef SUBTARGET_CPP_SPEC
-+#define SUBTARGET_CPP_SPEC "-D__ELF__"
-+#endif
-+
-+
-+extern struct rtx_def *avr32_compare_op0;
-+extern struct rtx_def *avr32_compare_op1;
-+
-+
-+extern struct rtx_def *avr32_acc_cache;
-+
-+/* cache instruction op5 codes */
-+#define AVR32_CACHE_INVALIDATE_ICACHE 1
-+
-+/* These bits describe the different types of function supported
-+ by the AVR32 backend. They are exclusive. ie a function cannot be both a
-+ normal function and an interworked function, for example. Knowing the
-+ type of a function is important for determining its prologue and
-+ epilogue sequences.
-+ Note value 7 is currently unassigned. Also note that the interrupt
-+ function types all have bit 2 set, so that they can be tested for easily.
-+ Note that 0 is deliberately chosen for AVR32_FT_UNKNOWN so that when the
-+ machine_function structure is initialized (to zero) func_type will
-+ default to unknown. This will force the first use of avr32_current_func_type
-+ to call avr32_compute_func_type. */
-+#define AVR32_FT_UNKNOWN 0 /* Type has not yet been determined.
-+ */
-+#define AVR32_FT_NORMAL 1 /* Your normal, straightforward
-+ function. */
-+#define AVR32_FT_ACALL 2 /* An acall function. */
-+#define AVR32_FT_EXCEPTION_HANDLER 3 /* A C++ exception handler. */
-+#define AVR32_FT_ISR_FULL 4 /* A fully shadowed interrupt mode. */
-+#define AVR32_FT_ISR_HALF 5 /* A half shadowed interrupt mode. */
-+#define AVR32_FT_ISR_NONE 6 /* No shadow registers. */
-+
-+#define AVR32_FT_TYPE_MASK ((1 << 3) - 1)
-+
-+/* In addition functions can have several type modifiers,
-+ outlined by these bit masks: */
-+#define AVR32_FT_INTERRUPT (1 << 2) /* Note overlap with FT_ISR
-+ and above. */
-+#define AVR32_FT_NAKED (1 << 3) /* No prologue or epilogue. */
-+#define AVR32_FT_VOLATILE (1 << 4) /* Does not return. */
-+#define AVR32_FT_NESTED (1 << 5) /* Embedded inside another
-+ func. */
-+
-+/* Some macros to test these flags. */
-+#define AVR32_FUNC_TYPE(t) (t & AVR32_FT_TYPE_MASK)
-+#define IS_INTERRUPT(t) (t & AVR32_FT_INTERRUPT)
-+#define IS_VOLATILE(t) (t & AVR32_FT_VOLATILE)
-+#define IS_NAKED(t) (t & AVR32_FT_NAKED)
-+#define IS_NESTED(t) (t & AVR32_FT_NESTED)
-+
-+
-+typedef struct minipool_labels
-+GTY ((chain_next ("%h.next"), chain_prev ("%h.prev")))
-+{
-+ rtx label;
-+ struct minipool_labels *prev;
-+ struct minipool_labels *next;
-+} minipool_labels;
-+
-+/* A C structure for machine-specific, per-function data.
-+ This is added to the cfun structure. */
-+
-+typedef struct machine_function
-+GTY (())
-+{
-+ /* Records the type of the current function. */
-+ unsigned long func_type;
-+ /* List of minipool labels, use for checking if code label is valid in a
-+ memory expression */
-+ minipool_labels *minipool_label_head;
-+ minipool_labels *minipool_label_tail;
-+} machine_function;
-+
-+/* Initialize data used by insn expanders. This is called from insn_emit,
-+ once for every function before code is generated. */
-+#define INIT_EXPANDERS avr32_init_expanders ()
-+
-+/******************************************************************************
-+ * SPECS
-+ *****************************************************************************/
-+
-+#ifndef ASM_SPEC
-+#define ASM_SPEC "%{fpic:--pic} %{mrelax|O*:%{mno-relax|O0|O1: ;:--linkrelax}} %{march=*:-march=%*} %{mpart=*:-mpart=%*}"
-+#endif
-+
-+#ifndef MULTILIB_DEFAULTS
-+#define MULTILIB_DEFAULTS { "march=ap", "" }
-+#endif
-+
-+/******************************************************************************
-+ * Run-time Target Specification
-+ *****************************************************************************/
-+#ifndef TARGET_VERSION
-+#define TARGET_VERSION fprintf(stderr, " (AVR32, GNU assembler syntax)");
-+#endif
-+
-+/* Part types. Keep this in sync with the order of avr32_part_types in avr32.c*/
-+enum part_type
-+{
-+ PART_TYPE_AVR32_NONE,
-+ PART_TYPE_AVR32_AP7000,
-+ PART_TYPE_AVR32_AP7010,
-+ PART_TYPE_AVR32_AP7020,
-+ PART_TYPE_AVR32_UC3A0256,
-+ PART_TYPE_AVR32_UC3A0512,
-+ PART_TYPE_AVR32_UC3A1128,
-+ PART_TYPE_AVR32_UC3A1256,
-+ PART_TYPE_AVR32_UC3A1512,
-+ PART_TYPE_AVR32_UC3B064,
-+ PART_TYPE_AVR32_UC3B0128,
-+ PART_TYPE_AVR32_UC3B0256,
-+ PART_TYPE_AVR32_UC3B164,
-+ PART_TYPE_AVR32_UC3B1128,
-+ PART_TYPE_AVR32_UC3B1256
-+};
-+
-+/* Microarchitectures. */
-+enum microarchitecture_type
-+{
-+ UARCH_TYPE_AVR32A,
-+ UARCH_TYPE_AVR32B,
-+ UARCH_TYPE_NONE
-+};
-+
-+/* Architectures types which specifies the pipeline.
-+ Keep this in sync with avr32_arch_types in avr32.c
-+ and the pipeline attribute in avr32.md */
-+enum architecture_type
-+{
-+ ARCH_TYPE_AVR32_AP,
-+ ARCH_TYPE_AVR32_UC,
-+ ARCH_TYPE_AVR32_NONE
-+};
-+
-+/* Flag specifying if the cpu has support for DSP instructions.*/
-+#define FLAG_AVR32_HAS_DSP (1 << 0)
-+/* Flag specifying if the cpu has support for Read-Modify-Write
-+ instructions.*/
-+#define FLAG_AVR32_HAS_RMW (1 << 1)
-+/* Flag specifying if the cpu has support for SIMD instructions. */
-+#define FLAG_AVR32_HAS_SIMD (1 << 2)
-+/* Flag specifying if the cpu has support for unaligned memory word access. */
-+#define FLAG_AVR32_HAS_UNALIGNED_WORD (1 << 3)
-+/* Flag specifying if the cpu has support for branch prediction. */
-+#define FLAG_AVR32_HAS_BRANCH_PRED (1 << 4)
-+/* Flag specifying if the cpu has support for a return stack. */
-+#define FLAG_AVR32_HAS_RETURN_STACK (1 << 5)
-+/* Flag specifying if the cpu has caches. */
-+#define FLAG_AVR32_HAS_CACHES (1 << 6)
-+
-+/* Structure for holding information about different avr32 CPUs/parts */
-+struct part_type_s
-+{
-+ const char *const name;
-+ enum part_type part_type;
-+ enum architecture_type arch_type;
-+ /* Must lie outside user's namespace. NULL == no macro. */
-+ const char *const macro;
-+};
-+
-+/* Structure for holding information about different avr32 pipeline
-+ architectures. */
-+struct arch_type_s
-+{
-+ const char *const name;
-+ enum architecture_type arch_type;
-+ enum microarchitecture_type uarch_type;
-+ const unsigned long feature_flags;
-+ /* Must lie outside user's namespace. NULL == no macro. */
-+ const char *const macro;
-+};
-+
-+extern const struct part_type_s *avr32_part;
-+extern const struct arch_type_s *avr32_arch;
-+
-+#define TARGET_SIMD (avr32_arch->feature_flags & FLAG_AVR32_HAS_SIMD)
-+#define TARGET_DSP (avr32_arch->feature_flags & FLAG_AVR32_HAS_DSP)
-+#define TARGET_RMW (avr32_arch->feature_flags & FLAG_AVR32_HAS_RMW)
-+#define TARGET_UNALIGNED_WORD (avr32_arch->feature_flags & FLAG_AVR32_HAS_UNALIGNED_WORD)
-+#define TARGET_BRANCH_PRED (avr32_arch->feature_flags & FLAG_AVR32_HAS_BRANCH_PRED)
-+#define TARGET_RETURN_STACK (avr32_arch->feature_flags & FLAG_AVR32_HAS_RETURN_STACK)
-+#define TARGET_CACHES (avr32_arch->feature_flags & FLAG_AVR32_HAS_CACHES)
-+
-+#define CAN_DEBUG_WITHOUT_FP
-+
-+/******************************************************************************
-+ * Storage Layout
-+ *****************************************************************************/
-+
-+/*
-+Define this macro to have the value 1 if the most significant bit in a
-+byte has the lowest number; otherwise define it to have the value zero.
-+This means that bit-field instructions count from the most significant
-+bit. If the machine has no bit-field instructions, then this must still
-+be defined, but it doesn't matter which value it is defined to. This
-+macro need not be a constant.
-+
-+This macro does not affect the way structure fields are packed into
-+bytes or words; that is controlled by BYTES_BIG_ENDIAN.
-+*/
-+#define BITS_BIG_ENDIAN 0
-+
-+/*
-+Define this macro to have the value 1 if the most significant byte in a
-+word has the lowest number. This macro need not be a constant.
-+*/
-+/*
-+ Data is stored in an big-endian way.
-+*/
-+#define BYTES_BIG_ENDIAN 1
-+
-+/*
-+Define this macro to have the value 1 if, in a multiword object, the
-+most significant word has the lowest number. This applies to both
-+memory locations and registers; GCC fundamentally assumes that the
-+order of words in memory is the same as the order in registers. This
-+macro need not be a constant.
-+*/
-+/*
-+ Data is stored in an bin-endian way.
-+*/
-+#define WORDS_BIG_ENDIAN 1
-+
-+/*
-+Define this macro if WORDS_BIG_ENDIAN is not constant. This must be a
-+constant value with the same meaning as WORDS_BIG_ENDIAN, which will be
-+used only when compiling libgcc2.c. Typically the value will be set
-+based on preprocessor defines.
-+*/
-+#define LIBGCC2_WORDS_BIG_ENDIAN WORDS_BIG_ENDIAN
-+
-+/*
-+Define this macro to have the value 1 if DFmode, XFmode or
-+TFmode floating point numbers are stored in memory with the word
-+containing the sign bit at the lowest address; otherwise define it to
-+have the value 0. This macro need not be a constant.
-+
-+You need not define this macro if the ordering is the same as for
-+multi-word integers.
-+*/
-+/* #define FLOAT_WORDS_BIG_ENDIAN 1 */
-+
-+/*
-+Define this macro to be the number of bits in an addressable storage
-+unit (byte); normally 8.
-+*/
-+#define BITS_PER_UNIT 8
-+
-+/*
-+Number of bits in a word; normally 32.
-+*/
-+#define BITS_PER_WORD 32
-+
-+/*
-+Maximum number of bits in a word. If this is undefined, the default is
-+BITS_PER_WORD. Otherwise, it is the constant value that is the
-+largest value that BITS_PER_WORD can have at run-time.
-+*/
-+/* MAX_BITS_PER_WORD not defined*/
-+
-+/*
-+Number of storage units in a word; normally 4.
-+*/
-+#define UNITS_PER_WORD 4
-+
-+/*
-+Minimum number of units in a word. If this is undefined, the default is
-+UNITS_PER_WORD. Otherwise, it is the constant value that is the
-+smallest value that UNITS_PER_WORD can have at run-time.
-+*/
-+/* MIN_UNITS_PER_WORD not defined */
-+
-+/*
-+Width of a pointer, in bits. You must specify a value no wider than the
-+width of Pmode. If it is not equal to the width of Pmode,
-+you must define POINTERS_EXTEND_UNSIGNED.
-+*/
-+#define POINTER_SIZE 32
-+
-+/*
-+A C expression whose value is greater than zero if pointers that need to be
-+extended from being POINTER_SIZE bits wide to Pmode are to
-+be zero-extended and zero if they are to be sign-extended. If the value
-+is less then zero then there must be an "ptr_extend" instruction that
-+extends a pointer from POINTER_SIZE to Pmode.
-+
-+You need not define this macro if the POINTER_SIZE is equal
-+to the width of Pmode.
-+*/
-+/* #define POINTERS_EXTEND_UNSIGNED */
-+
-+/*
-+A Macro to update M and UNSIGNEDP when an object whose type
-+is TYPE and which has the specified mode and signedness is to be
-+stored in a register. This macro is only called when TYPE is a
-+scalar type.
-+
-+On most RISC machines, which only have operations that operate on a full
-+register, define this macro to set M to word_mode if
-+M is an integer mode narrower than BITS_PER_WORD. In most
-+cases, only integer modes should be widened because wider-precision
-+floating-point operations are usually more expensive than their narrower
-+counterparts.
-+
-+For most machines, the macro definition does not change UNSIGNEDP.
-+However, some machines, have instructions that preferentially handle
-+either signed or unsigned quantities of certain modes. For example, on
-+the DEC Alpha, 32-bit loads from memory and 32-bit add instructions
-+sign-extend the result to 64 bits. On such machines, set
-+UNSIGNEDP according to which kind of extension is more efficient.
-+
-+Do not define this macro if it would never modify M.
-+*/
-+#define PROMOTE_MODE(M, UNSIGNEDP, TYPE) \
-+ { \
-+ if (GET_MODE_CLASS (M) == MODE_INT \
-+ && GET_MODE_SIZE (M) < 4) \
-+ { \
-+ if (M == QImode) \
-+ UNSIGNEDP = 1; \
-+ else if (M == SImode) \
-+ UNSIGNEDP = 0; \
-+ (M) = SImode; \
-+ } \
-+ }
-+
-+#define PROMOTE_FUNCTION_MODE(M, UNSIGNEDP, TYPE) \
-+ { \
-+ if (GET_MODE_CLASS (M) == MODE_INT \
-+ && GET_MODE_SIZE (M) < 4) \
-+ { \
-+ (M) = SImode; \
-+ } \
-+ }
-+
-+/* Define if operations between registers always perform the operation
-+ on the full register even if a narrower mode is specified. */
-+#define WORD_REGISTER_OPERATIONS
-+
-+/* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
-+ will either zero-extend or sign-extend. The value of this macro should
-+ be the code that says which one of the two operations is implicitly
-+ done, UNKNOWN if not known. */
-+#define LOAD_EXTEND_OP(MODE) \
-+ (((MODE) == QImode) ? ZERO_EXTEND \
-+ : ((MODE) == HImode) ? SIGN_EXTEND : UNKNOWN)
-+
-+
-+/*
-+Define this macro if the promotion described by PROMOTE_MODE
-+should only be performed for outgoing function arguments or
-+function return values, as specified by PROMOTE_FUNCTION_ARGS
-+and PROMOTE_FUNCTION_RETURN, respectively.
-+*/
-+/* #define PROMOTE_FOR_CALL_ONLY */
-+
-+/*
-+Normal alignment required for function parameters on the stack, in
-+bits. All stack parameters receive at least this much alignment
-+regardless of data type. On most machines, this is the same as the
-+size of an integer.
-+*/
-+#define PARM_BOUNDARY 32
-+
-+/*
-+Define this macro to the minimum alignment enforced by hardware for the
-+stack pointer on this machine. The definition is a C expression for the
-+desired alignment (measured in bits). This value is used as a default
-+if PREFERRED_STACK_BOUNDARY is not defined. On most machines,
-+this should be the same as PARM_BOUNDARY.
-+*/
-+#define STACK_BOUNDARY 32
-+
-+/*
-+Define this macro if you wish to preserve a certain alignment for the
-+stack pointer, greater than what the hardware enforces. The definition
-+is a C expression for the desired alignment (measured in bits). This
-+macro must evaluate to a value equal to or larger than
-+STACK_BOUNDARY.
-+*/
-+#define PREFERRED_STACK_BOUNDARY (TARGET_FORCE_DOUBLE_ALIGN ? 64 : 32 )
-+
-+/*
-+Alignment required for a function entry point, in bits.
-+*/
-+#define FUNCTION_BOUNDARY 16
-+
-+/*
-+Biggest alignment that any data type can require on this machine, in bits.
-+*/
-+#define BIGGEST_ALIGNMENT (TARGET_FORCE_DOUBLE_ALIGN ? 64 : 32 )
-+
-+/*
-+If defined, the smallest alignment, in bits, that can be given to an
-+object that can be referenced in one operation, without disturbing any
-+nearby object. Normally, this is BITS_PER_UNIT, but may be larger
-+on machines that don't have byte or half-word store operations.
-+*/
-+#define MINIMUM_ATOMIC_ALIGNMENT BITS_PER_UNIT
-+
-+
-+/*
-+An integer expression for the size in bits of the largest integer machine mode that
-+should actually be used. All integer machine modes of this size or smaller can be
-+used for structures and unions with the appropriate sizes. If this macro is undefined,
-+GET_MODE_BITSIZE (DImode) is assumed.*/
-+#define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (DImode)
-+
-+
-+/*
-+If defined, a C expression to compute the alignment given to a constant
-+that is being placed in memory. CONSTANT is the constant and
-+BASIC_ALIGN is the alignment that the object would ordinarily
-+have. The value of this macro is used instead of that alignment to
-+align the object.
-+
-+If this macro is not defined, then BASIC_ALIGN is used.
-+
-+The typical use of this macro is to increase alignment for string
-+constants to be word aligned so that strcpy calls that copy
-+constants can be done inline.
-+*/
-+#define CONSTANT_ALIGNMENT(CONSTANT, BASIC_ALIGN) \
-+ ((TREE_CODE(CONSTANT) == STRING_CST) ? BITS_PER_WORD : BASIC_ALIGN)
-+
-+/* Try to align string to a word. */
-+#define DATA_ALIGNMENT(TYPE, ALIGN) \
-+ ({(TREE_CODE (TYPE) == ARRAY_TYPE \
-+ && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
-+ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN));})
-+
-+/* Try to align local store strings to a word. */
-+#define LOCAL_ALIGNMENT(TYPE, ALIGN) \
-+ ({(TREE_CODE (TYPE) == ARRAY_TYPE \
-+ && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
-+ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN));})
-+
-+/*
-+Define this macro to be the value 1 if instructions will fail to work
-+if given data not on the nominal alignment. If instructions will merely
-+go slower in that case, define this macro as 0.
-+*/
-+#define STRICT_ALIGNMENT 1
-+
-+/*
-+Define this if you wish to imitate the way many other C compilers handle
-+alignment of bit-fields and the structures that contain them.
-+
-+The behavior is that the type written for a bit-field (int,
-+short, or other integer type) imposes an alignment for the
-+entire structure, as if the structure really did contain an ordinary
-+field of that type. In addition, the bit-field is placed within the
-+structure so that it would fit within such a field, not crossing a
-+boundary for it.
-+
-+Thus, on most machines, a bit-field whose type is written as int
-+would not cross a four-byte boundary, and would force four-byte
-+alignment for the whole structure. (The alignment used may not be four
-+bytes; it is controlled by the other alignment parameters.)
-+
-+If the macro is defined, its definition should be a C expression;
-+a nonzero value for the expression enables this behavior.
-+
-+Note that if this macro is not defined, or its value is zero, some
-+bit-fields may cross more than one alignment boundary. The compiler can
-+support such references if there are insv, extv, and
-+extzv insns that can directly reference memory.
-+
-+The other known way of making bit-fields work is to define
-+STRUCTURE_SIZE_BOUNDARY as large as BIGGEST_ALIGNMENT.
-+Then every structure can be accessed with fullwords.
-+
-+Unless the machine has bit-field instructions or you define
-+STRUCTURE_SIZE_BOUNDARY that way, you must define
-+PCC_BITFIELD_TYPE_MATTERS to have a nonzero value.
-+
-+If your aim is to make GCC use the same conventions for laying out
-+bit-fields as are used by another compiler, here is how to investigate
-+what the other compiler does. Compile and run this program:
-+
-+struct foo1
-+{
-+ char x;
-+ char :0;
-+ char y;
-+};
-+
-+struct foo2
-+{
-+ char x;
-+ int :0;
-+ char y;
-+};
-+
-+main ()
-+{
-+ printf ("Size of foo1 is %d\n",
-+ sizeof (struct foo1));
-+ printf ("Size of foo2 is %d\n",
-+ sizeof (struct foo2));
-+ exit (0);
-+}
-+
-+If this prints 2 and 5, then the compiler's behavior is what you would
-+get from PCC_BITFIELD_TYPE_MATTERS.
-+*/
-+#define PCC_BITFIELD_TYPE_MATTERS 1
-+
-+
-+/******************************************************************************
-+ * Layout of Source Language Data Types
-+ *****************************************************************************/
-+
-+/*
-+A C expression for the size in bits of the type int on the
-+target machine. If you don't define this, the default is one word.
-+*/
-+#define INT_TYPE_SIZE 32
-+
-+/*
-+A C expression for the size in bits of the type short on the
-+target machine. If you don't define this, the default is half a word. (If
-+this would be less than one storage unit, it is rounded up to one unit.)
-+*/
-+#define SHORT_TYPE_SIZE 16
-+
-+/*
-+A C expression for the size in bits of the type long on the
-+target machine. If you don't define this, the default is one word.
-+*/
-+#define LONG_TYPE_SIZE 32
-+
-+
-+/*
-+A C expression for the size in bits of the type long long on the
-+target machine. If you don't define this, the default is two
-+words. If you want to support GNU Ada on your machine, the value of this
-+macro must be at least 64.
-+*/
-+#define LONG_LONG_TYPE_SIZE 64
-+
-+/*
-+A C expression for the size in bits of the type char on the
-+target machine. If you don't define this, the default is
-+BITS_PER_UNIT.
-+*/
-+#define CHAR_TYPE_SIZE 8
-+
-+
-+/*
-+A C expression for the size in bits of the C++ type bool and
-+C99 type _Bool on the target machine. If you don't define
-+this, and you probably shouldn't, the default is CHAR_TYPE_SIZE.
-+*/
-+#define BOOL_TYPE_SIZE 8
-+
-+
-+/*
-+An expression whose value is 1 or 0, according to whether the type
-+char should be signed or unsigned by default. The user can
-+always override this default with the options -fsigned-char
-+and -funsigned-char.
-+*/
-+/* We are using unsigned char */
-+#define DEFAULT_SIGNED_CHAR 0
-+
-+
-+/*
-+A C expression for a string describing the name of the data type to use
-+for size values. The typedef name size_t is defined using the
-+contents of the string.
-+
-+The string can contain more than one keyword. If so, separate them with
-+spaces, and write first any length keyword, then unsigned if
-+appropriate, and finally int. The string must exactly match one
-+of the data type names defined in the function
-+init_decl_processing in the file c-decl.c. You may not
-+omit int or change the order - that would cause the compiler to
-+crash on startup.
-+
-+If you don't define this macro, the default is "long unsigned int".
-+*/
-+#define SIZE_TYPE "long unsigned int"
-+
-+/*
-+A C expression for a string describing the name of the data type to use
-+for the result of subtracting two pointers. The typedef name
-+ptrdiff_t is defined using the contents of the string. See
-+SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is "long int".
-+*/
-+#define PTRDIFF_TYPE "long int"
-+
-+
-+/*
-+A C expression for the size in bits of the data type for wide
-+characters. This is used in cpp, which cannot make use of
-+WCHAR_TYPE.
-+*/
-+#define WCHAR_TYPE_SIZE 32
-+
-+
-+/*
-+A C expression for a string describing the name of the data type to
-+use for wide characters passed to printf and returned from
-+getwc. The typedef name wint_t is defined using the
-+contents of the string. See SIZE_TYPE above for more
-+information.
-+
-+If you don't define this macro, the default is "unsigned int".
-+*/
-+#define WINT_TYPE "unsigned int"
-+
-+/*
-+A C expression for a string describing the name of the data type that
-+can represent any value of any standard or extended signed integer type.
-+The typedef name intmax_t is defined using the contents of the
-+string. See SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is the first of
-+"int", "long int", or "long long int" that has as
-+much precision as long long int.
-+*/
-+#define INTMAX_TYPE "long long int"
-+
-+/*
-+A C expression for a string describing the name of the data type that
-+can represent any value of any standard or extended unsigned integer
-+type. The typedef name uintmax_t is defined using the contents
-+of the string. See SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is the first of
-+"unsigned int", "long unsigned int", or "long long unsigned int"
-+that has as much precision as long long unsigned int.
-+*/
-+#define UINTMAX_TYPE "long long unsigned int"
-+
-+
-+/******************************************************************************
-+ * Register Usage
-+ *****************************************************************************/
-+
-+/* Convert from gcc internal register number to register number
-+ used in assembly code */
-+#define ASM_REGNUM(reg) (LAST_REGNUM - (reg))
-+#define ASM_FP_REGNUM(reg) (LAST_FP_REGNUM - (reg))
-+
-+/* Convert between register number used in assembly to gcc
-+ internal register number */
-+#define INTERNAL_REGNUM(reg) (LAST_REGNUM - (reg))
-+#define INTERNAL_FP_REGNUM(reg) (LAST_FP_REGNUM - (reg))
-+
-+/** Basic Characteristics of Registers **/
-+
-+/*
-+Number of hardware registers known to the compiler. They receive
-+numbers 0 through FIRST_PSEUDO_REGISTER-1; thus, the first
-+pseudo register's number really is assigned the number
-+FIRST_PSEUDO_REGISTER.
-+*/
-+#define FIRST_PSEUDO_REGISTER (LAST_FP_REGNUM + 1)
-+
-+#define FIRST_REGNUM 0
-+#define LAST_REGNUM 15
-+#define NUM_FP_REGS 16
-+#define FIRST_FP_REGNUM 16
-+#define LAST_FP_REGNUM (16+NUM_FP_REGS-1)
-+
-+/*
-+An initializer that says which registers are used for fixed purposes
-+all throughout the compiled code and are therefore not available for
-+general allocation. These would include the stack pointer, the frame
-+pointer (except on machines where that can be used as a general
-+register when no frame pointer is needed), the program counter on
-+machines where that is considered one of the addressable registers,
-+and any other numbered register with a standard use.
-+
-+This information is expressed as a sequence of numbers, separated by
-+commas and surrounded by braces. The nth number is 1 if
-+register n is fixed, 0 otherwise.
-+
-+The table initialized from this macro, and the table initialized by
-+the following one, may be overridden at run time either automatically,
-+by the actions of the macro CONDITIONAL_REGISTER_USAGE, or by
-+the user with the command options -ffixed-[reg],
-+-fcall-used-[reg] and -fcall-saved-[reg].
-+*/
-+
-+/* The internal gcc register numbers are reversed
-+ compared to the real register numbers since
-+ gcc expects data types stored over multiple
-+ registers in the register file to be big endian
-+ if the memory layout is big endian. But this
-+ is not the case for avr32 so we fake a big
-+ endian register file. */
-+
-+#define FIXED_REGISTERS { \
-+ 1, /* Program Counter */ \
-+ 0, /* Link Register */ \
-+ 1, /* Stack Pointer */ \
-+ 0, /* r12 */ \
-+ 0, /* r11 */ \
-+ 0, /* r10 */ \
-+ 0, /* r9 */ \
-+ 0, /* r8 */ \
-+ 0, /* r7 */ \
-+ 0, /* r6 */ \
-+ 0, /* r5 */ \
-+ 0, /* r4 */ \
-+ 0, /* r3 */ \
-+ 0, /* r2 */ \
-+ 0, /* r1 */ \
-+ 0, /* r0 */ \
-+ 0, /* f15 */ \
-+ 0, /* f14 */ \
-+ 0, /* f13 */ \
-+ 0, /* f12 */ \
-+ 0, /* f11 */ \
-+ 0, /* f10 */ \
-+ 0, /* f9 */ \
-+ 0, /* f8 */ \
-+ 0, /* f7 */ \
-+ 0, /* f6 */ \
-+ 0, /* f5 */ \
-+ 0, /* f4 */ \
-+ 0, /* f3 */ \
-+ 0, /* f2*/ \
-+ 0, /* f1 */ \
-+ 0 /* f0 */ \
-+}
-+
-+/*
-+Like FIXED_REGISTERS but has 1 for each register that is
-+clobbered (in general) by function calls as well as for fixed
-+registers. This macro therefore identifies the registers that are not
-+available for general allocation of values that must live across
-+function calls.
-+
-+If a register has 0 in CALL_USED_REGISTERS, the compiler
-+automatically saves it on function entry and restores it on function
-+exit, if the register is used within the function.
-+*/
-+#define CALL_USED_REGISTERS { \
-+ 1, /* Program Counter */ \
-+ 0, /* Link Register */ \
-+ 1, /* Stack Pointer */ \
-+ 1, /* r12 */ \
-+ 1, /* r11 */ \
-+ 1, /* r10 */ \
-+ 1, /* r9 */ \
-+ 1, /* r8 */ \
-+ 0, /* r7 */ \
-+ 0, /* r6 */ \
-+ 0, /* r5 */ \
-+ 0, /* r4 */ \
-+ 0, /* r3 */ \
-+ 0, /* r2 */ \
-+ 0, /* r1 */ \
-+ 0, /* r0 */ \
-+ 1, /* f15 */ \
-+ 1, /* f14 */ \
-+ 1, /* f13 */ \
-+ 1, /* f12 */ \
-+ 1, /* f11 */ \
-+ 1, /* f10 */ \
-+ 1, /* f9 */ \
-+ 1, /* f8 */ \
-+ 0, /* f7 */ \
-+ 0, /* f6 */ \
-+ 0, /* f5 */ \
-+ 0, /* f4 */ \
-+ 0, /* f3 */ \
-+ 0, /* f2*/ \
-+ 0, /* f1*/ \
-+ 0, /* f0 */ \
-+}
-+
-+/* Interrupt functions can only use registers that have already been
-+ saved by the prologue, even if they would normally be
-+ call-clobbered. */
-+#define HARD_REGNO_RENAME_OK(SRC, DST) \
-+ (! IS_INTERRUPT (cfun->machine->func_type) || \
-+ regs_ever_live[DST])
-+
-+
-+/*
-+Zero or more C statements that may conditionally modify five variables
-+fixed_regs, call_used_regs, global_regs,
-+reg_names, and reg_class_contents, to take into account
-+any dependence of these register sets on target flags. The first three
-+of these are of type char [] (interpreted as Boolean vectors).
-+global_regs is a const char *[], and
-+reg_class_contents is a HARD_REG_SET. Before the macro is
-+called, fixed_regs, call_used_regs,
-+reg_class_contents, and reg_names have been initialized
-+from FIXED_REGISTERS, CALL_USED_REGISTERS,
-+REG_CLASS_CONTENTS, and REGISTER_NAMES, respectively.
-+global_regs has been cleared, and any -ffixed-[reg],
-+-fcall-used-[reg] and -fcall-saved-[reg]
-+command options have been applied.
-+
-+You need not define this macro if it has no work to do.
-+
-+If the usage of an entire class of registers depends on the target
-+flags, you may indicate this to GCC by using this macro to modify
-+fixed_regs and call_used_regs to 1 for each of the
-+registers in the classes which should not be used by GCC. Also define
-+the macro REG_CLASS_FROM_LETTER to return NO_REGS if it
-+is called with a letter for a class that shouldn't be used.
-+
-+ (However, if this class is not included in GENERAL_REGS and all
-+of the insn patterns whose constraints permit this class are
-+controlled by target switches, then GCC will automatically avoid using
-+these registers when the target switches are opposed to them.)
-+*/
-+#define CONDITIONAL_REGISTER_USAGE \
-+ do \
-+ { \
-+ int regno; \
-+ \
-+ if (TARGET_SOFT_FLOAT) \
-+ { \
-+ for (regno = FIRST_FP_REGNUM; \
-+ regno <= LAST_FP_REGNUM; ++regno) \
-+ fixed_regs[regno] = call_used_regs[regno] = 1; \
-+ } \
-+ if (flag_pic) \
-+ { \
-+ fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
-+ call_used_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
-+ } \
-+ } \
-+ while (0)
-+
-+
-+/*
-+If the program counter has a register number, define this as that
-+register number. Otherwise, do not define it.
-+*/
-+
-+#define LAST_AVR32_REGNUM 16
-+
-+
-+/** Order of Allocation of Registers **/
-+
-+/*
-+If defined, an initializer for a vector of integers, containing the
-+numbers of hard registers in the order in which GCC should prefer
-+to use them (from most preferred to least).
-+
-+If this macro is not defined, registers are used lowest numbered first
-+(all else being equal).
-+
-+One use of this macro is on machines where the highest numbered
-+registers must always be saved and the save-multiple-registers
-+instruction supports only sequences of consecutive registers. On such
-+machines, define REG_ALLOC_ORDER to be an initializer that lists
-+the highest numbered allocable register first.
-+*/
-+#define REG_ALLOC_ORDER \
-+{ \
-+ INTERNAL_REGNUM(8), \
-+ INTERNAL_REGNUM(9), \
-+ INTERNAL_REGNUM(10), \
-+ INTERNAL_REGNUM(11), \
-+ INTERNAL_REGNUM(12), \
-+ LR_REGNUM, \
-+ INTERNAL_REGNUM(7), \
-+ INTERNAL_REGNUM(6), \
-+ INTERNAL_REGNUM(5), \
-+ INTERNAL_REGNUM(4), \
-+ INTERNAL_REGNUM(3), \
-+ INTERNAL_REGNUM(2), \
-+ INTERNAL_REGNUM(1), \
-+ INTERNAL_REGNUM(0), \
-+ INTERNAL_FP_REGNUM(15), \
-+ INTERNAL_FP_REGNUM(14), \
-+ INTERNAL_FP_REGNUM(13), \
-+ INTERNAL_FP_REGNUM(12), \
-+ INTERNAL_FP_REGNUM(11), \
-+ INTERNAL_FP_REGNUM(10), \
-+ INTERNAL_FP_REGNUM(9), \
-+ INTERNAL_FP_REGNUM(8), \
-+ INTERNAL_FP_REGNUM(7), \
-+ INTERNAL_FP_REGNUM(6), \
-+ INTERNAL_FP_REGNUM(5), \
-+ INTERNAL_FP_REGNUM(4), \
-+ INTERNAL_FP_REGNUM(3), \
-+ INTERNAL_FP_REGNUM(2), \
-+ INTERNAL_FP_REGNUM(1), \
-+ INTERNAL_FP_REGNUM(0), \
-+ SP_REGNUM, \
-+ PC_REGNUM \
-+}
-+
-+
-+/** How Values Fit in Registers **/
-+
-+/*
-+A C expression for the number of consecutive hard registers, starting
-+at register number REGNO, required to hold a value of mode
-+MODE.
-+
-+On a machine where all registers are exactly one word, a suitable
-+definition of this macro is
-+
-+#define HARD_REGNO_NREGS(REGNO, MODE) \
-+ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \
-+ / UNITS_PER_WORD)
-+*/
-+#define HARD_REGNO_NREGS(REGNO, MODE) \
-+ ((unsigned int)((GET_MODE_SIZE(MODE) + UNITS_PER_WORD -1 ) / UNITS_PER_WORD))
-+
-+/*
-+A C expression that is nonzero if it is permissible to store a value
-+of mode MODE in hard register number REGNO (or in several
-+registers starting with that one). For a machine where all registers
-+are equivalent, a suitable definition is
-+
-+ #define HARD_REGNO_MODE_OK(REGNO, MODE) 1
-+
-+You need not include code to check for the numbers of fixed registers,
-+because the allocation mechanism considers them to be always occupied.
-+
-+On some machines, double-precision values must be kept in even/odd
-+register pairs. You can implement that by defining this macro to reject
-+odd register numbers for such modes.
-+
-+The minimum requirement for a mode to be OK in a register is that the
-+mov[mode] instruction pattern support moves between the
-+register and other hard register in the same class and that moving a
-+value into the register and back out not alter it.
-+
-+Since the same instruction used to move word_mode will work for
-+all narrower integer modes, it is not necessary on any machine for
-+HARD_REGNO_MODE_OK to distinguish between these modes, provided
-+you define patterns movhi, etc., to take advantage of this. This
-+is useful because of the interaction between HARD_REGNO_MODE_OK
-+and MODES_TIEABLE_P; it is very desirable for all integer modes
-+to be tieable.
-+
-+Many machines have special registers for floating point arithmetic.
-+Often people assume that floating point machine modes are allowed only
-+in floating point registers. This is not true. Any registers that
-+can hold integers can safely hold a floating point machine
-+mode, whether or not floating arithmetic can be done on it in those
-+registers. Integer move instructions can be used to move the values.
-+
-+On some machines, though, the converse is true: fixed-point machine
-+modes may not go in floating registers. This is true if the floating
-+registers normalize any value stored in them, because storing a
-+non-floating value there would garble it. In this case,
-+HARD_REGNO_MODE_OK should reject fixed-point machine modes in
-+floating registers. But if the floating registers do not automatically
-+normalize, if you can store any bit pattern in one and retrieve it
-+unchanged without a trap, then any machine mode may go in a floating
-+register, so you can define this macro to say so.
-+
-+The primary significance of special floating registers is rather that
-+they are the registers acceptable in floating point arithmetic
-+instructions. However, this is of no concern to
-+HARD_REGNO_MODE_OK. You handle it by writing the proper
-+constraints for those instructions.
-+
-+On some machines, the floating registers are especially slow to access,
-+so that it is better to store a value in a stack frame than in such a
-+register if floating point arithmetic is not being done. As long as the
-+floating registers are not in class GENERAL_REGS, they will not
-+be used unless some pattern's constraint asks for one.
-+*/
-+#define HARD_REGNO_MODE_OK(REGNO, MODE) avr32_hard_regno_mode_ok(REGNO, MODE)
-+
-+/*
-+A C expression that is nonzero if a value of mode
-+MODE1 is accessible in mode MODE2 without copying.
-+
-+If HARD_REGNO_MODE_OK(R, MODE1) and
-+HARD_REGNO_MODE_OK(R, MODE2) are always the same for
-+any R, then MODES_TIEABLE_P(MODE1, MODE2)
-+should be nonzero. If they differ for any R, you should define
-+this macro to return zero unless some other mechanism ensures the
-+accessibility of the value in a narrower mode.
-+
-+You should define this macro to return nonzero in as many cases as
-+possible since doing so will allow GCC to perform better register
-+allocation.
-+*/
-+#define MODES_TIEABLE_P(MODE1, MODE2) \
-+ (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2))
-+
-+
-+
-+/******************************************************************************
-+ * Register Classes
-+ *****************************************************************************/
-+
-+/*
-+An enumeral type that must be defined with all the register class names
-+as enumeral values. NO_REGS must be first. ALL_REGS
-+must be the last register class, followed by one more enumeral value,
-+LIM_REG_CLASSES, which is not a register class but rather
-+tells how many classes there are.
-+
-+Each register class has a number, which is the value of casting
-+the class name to type int. The number serves as an index
-+in many of the tables described below.
-+*/
-+enum reg_class
-+{
-+ NO_REGS,
-+ GENERAL_REGS,
-+ FP_REGS,
-+ ALL_REGS,
-+ LIM_REG_CLASSES
-+};
-+
-+/*
-+The number of distinct register classes, defined as follows:
-+ #define N_REG_CLASSES (int) LIM_REG_CLASSES
-+*/
-+#define N_REG_CLASSES (int)LIM_REG_CLASSES
-+
-+/*
-+An initializer containing the names of the register classes as C string
-+constants. These names are used in writing some of the debugging dumps.
-+*/
-+#define REG_CLASS_NAMES \
-+{ \
-+ "NO_REGS", \
-+ "GENERAL_REGS", \
-+ "FLOATING_POINT_REGS", \
-+ "ALL_REGS" \
-+}
-+
-+/*
-+An initializer containing the contents of the register classes, as integers
-+which are bit masks. The nth integer specifies the contents of class
-+n. The way the integer mask is interpreted is that
-+register r is in the class if mask & (1 << r) is 1.
-+
-+When the machine has more than 32 registers, an integer does not suffice.
-+Then the integers are replaced by sub-initializers, braced groupings containing
-+several integers. Each sub-initializer must be suitable as an initializer
-+for the type HARD_REG_SET which is defined in hard-reg-set.h.
-+In this situation, the first integer in each sub-initializer corresponds to
-+registers 0 through 31, the second integer to registers 32 through 63, and
-+so on.
-+*/
-+#define REG_CLASS_CONTENTS { \
-+ {0x00000000}, /* NO_REGS */ \
-+ {0x0000FFFF}, /* GENERAL_REGS */ \
-+ {0xFFFF0000}, /* FP_REGS */ \
-+ {0x7FFFFFFF}, /* ALL_REGS */ \
-+}
-+
-+
-+/*
-+A C expression whose value is a register class containing hard register
-+REGNO. In general there is more than one such class; choose a class
-+which is minimal, meaning that no smaller class also contains the
-+register.
-+*/
-+#define REGNO_REG_CLASS(REGNO) ((REGNO < 16) ? GENERAL_REGS : FP_REGS)
-+
-+/*
-+A macro whose definition is the name of the class to which a valid
-+base register must belong. A base register is one used in an address
-+which is the register value plus a displacement.
-+*/
-+#define BASE_REG_CLASS GENERAL_REGS
-+
-+/*
-+This is a variation of the BASE_REG_CLASS macro which allows
-+the selection of a base register in a mode depenedent manner. If
-+mode is VOIDmode then it should return the same value as
-+BASE_REG_CLASS.
-+*/
-+#define MODE_BASE_REG_CLASS(MODE) BASE_REG_CLASS
-+
-+/*
-+A macro whose definition is the name of the class to which a valid
-+index register must belong. An index register is one used in an
-+address where its value is either multiplied by a scale factor or
-+added to another register (as well as added to a displacement).
-+*/
-+#define INDEX_REG_CLASS BASE_REG_CLASS
-+
-+/*
-+A C expression which defines the machine-dependent operand constraint
-+letters for register classes. If CHAR is such a letter, the
-+value should be the register class corresponding to it. Otherwise,
-+the value should be NO_REGS. The register letter r,
-+corresponding to class GENERAL_REGS, will not be passed
-+to this macro; you do not need to handle it.
-+*/
-+#define REG_CLASS_FROM_LETTER(CHAR) ((CHAR) == 'f' ? FP_REGS : NO_REGS)
-+
-+
-+/* These assume that REGNO is a hard or pseudo reg number.
-+ They give nonzero only if REGNO is a hard reg of the suitable class
-+ or a pseudo reg currently allocated to a suitable hard reg.
-+ Since they use reg_renumber, they are safe only once reg_renumber
-+ has been allocated, which happens in local-alloc.c. */
-+#define TEST_REGNO(R, TEST, VALUE) \
-+ ((R TEST VALUE) || ((unsigned) reg_renumber[R] TEST VALUE))
-+
-+/*
-+A C expression which is nonzero if register number num is suitable for use as a base
-+register in operand addresses. It may be either a suitable hard register or a pseudo
-+register that has been allocated such a hard register.
-+*/
-+#define REGNO_OK_FOR_BASE_P(NUM) TEST_REGNO(NUM, <=, LAST_REGNUM)
-+
-+/*
-+A C expression which is nonzero if register number NUM is
-+suitable for use as an index register in operand addresses. It may be
-+either a suitable hard register or a pseudo register that has been
-+allocated such a hard register.
-+
-+The difference between an index register and a base register is that
-+the index register may be scaled. If an address involves the sum of
-+two registers, neither one of them scaled, then either one may be
-+labeled the ``base'' and the other the ``index''; but whichever
-+labeling is used must fit the machine's constraints of which registers
-+may serve in each capacity. The compiler will try both labelings,
-+looking for one that is valid, and will reload one or both registers
-+only if neither labeling works.
-+*/
-+#define REGNO_OK_FOR_INDEX_P(NUM) TEST_REGNO(NUM, <=, LAST_REGNUM)
-+
-+/*
-+A C expression that places additional restrictions on the register class
-+to use when it is necessary to copy value X into a register in class
-+CLASS. The value is a register class; perhaps CLASS, or perhaps
-+another, smaller class. On many machines, the following definition is
-+safe: #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS
-+
-+Sometimes returning a more restrictive class makes better code. For
-+example, on the 68000, when X is an integer constant that is in range
-+for a 'moveq' instruction, the value of this macro is always
-+DATA_REGS as long as CLASS includes the data registers.
-+Requiring a data register guarantees that a 'moveq' will be used.
-+
-+If X is a const_double, by returning NO_REGS
-+you can force X into a memory constant. This is useful on
-+certain machines where immediate floating values cannot be loaded into
-+certain kinds of registers.
-+*/
-+#define PREFERRED_RELOAD_CLASS(X, CLASS) CLASS
-+
-+
-+
-+/*
-+A C expression for the maximum number of consecutive registers
-+of class CLASS needed to hold a value of mode MODE.
-+
-+This is closely related to the macro HARD_REGNO_NREGS. In fact,
-+the value of the macro CLASS_MAX_NREGS(CLASS, MODE)
-+should be the maximum value of HARD_REGNO_NREGS(REGNO, MODE)
-+for all REGNO values in the class CLASS.
-+
-+This macro helps control the handling of multiple-word values
-+in the reload pass.
-+*/
-+#define CLASS_MAX_NREGS(CLASS, MODE) /* ToDo:fixme */ \
-+ (unsigned int)((GET_MODE_SIZE(MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-+
-+
-+/*
-+ Using CONST_OK_FOR_CONSTRAINT_P instead of CONS_OK_FOR_LETTER_P
-+ in order to support constraints with more than one letter.
-+ Only two letters are then used for constant constraints,
-+ the letter 'K' and the letter 'I'. The constraint starting with
-+ these letters must consist of four characters. The character following
-+ 'K' or 'I' must be either 'u' (unsigned) or 's' (signed) to specify
-+ if the constant is zero or sign extended. The last two characters specify
-+ the length in bits of the constant. The base constraint letter 'I' means
-+ that this is an negated constant, meaning that actually -VAL should be
-+ checked to lie withing the valid range instead of VAL which is used when
-+ 'K' is the base constraint letter.
-+
-+*/
-+
-+#define CONSTRAINT_LEN(C, STR) \
-+ ( ((C) == 'K' || (C) == 'I') ? 4 : \
-+ ((C) == 'R') ? 5 : \
-+ ((C) == 'N' || (C) == 'O' || \
-+ (C) == 'P' || (C) == 'L' || (C) == 'J') ? -1 : \
-+ DEFAULT_CONSTRAINT_LEN((C), (STR)) )
-+
-+#define CONST_OK_FOR_CONSTRAINT_P(VALUE, C, STR) \
-+ avr32_const_ok_for_constraint_p(VALUE, C, STR)
-+
-+/*
-+A C expression that defines the machine-dependent operand constraint
-+letters that specify particular ranges of const_double values ('G' or 'H').
-+
-+If C is one of those letters, the expression should check that
-+VALUE, an RTX of code const_double, is in the appropriate
-+range and return 1 if so, 0 otherwise. If C is not one of those
-+letters, the value should be 0 regardless of VALUE.
-+
-+const_double is used for all floating-point constants and for
-+DImode fixed-point constants. A given letter can accept either
-+or both kinds of values. It can use GET_MODE to distinguish
-+between these kinds.
-+*/
-+#define CONST_DOUBLE_OK_FOR_LETTER_P(OP, C) \
-+ ((C) == 'G' ? avr32_const_double_immediate(OP) : 0)
-+
-+/*
-+A C expression that defines the optional machine-dependent constraint
-+letters that can be used to segregate specific types of operands, usually
-+memory references, for the target machine. Any letter that is not
-+elsewhere defined and not matched by REG_CLASS_FROM_LETTER
-+may be used. Normally this macro will not be defined.
-+
-+If it is required for a particular target machine, it should return 1
-+if VALUE corresponds to the operand type represented by the
-+constraint letter C. If C is not defined as an extra
-+constraint, the value returned should be 0 regardless of VALUE.
-+
-+For example, on the ROMP, load instructions cannot have their output
-+in r0 if the memory reference contains a symbolic address. Constraint
-+letter 'Q' is defined as representing a memory address that does
-+not contain a symbolic address. An alternative is specified with
-+a 'Q' constraint on the input and 'r' on the output. The next
-+alternative specifies 'm' on the input and a register class that
-+does not include r0 on the output.
-+*/
-+#define EXTRA_CONSTRAINT_STR(OP, C, STR) \
-+ ((C) == 'W' ? avr32_address_operand(OP, GET_MODE(OP)) : \
-+ (C) == 'R' ? (avr32_indirect_register_operand(OP, GET_MODE(OP)) || \
-+ (avr32_imm_disp_memory_operand(OP, GET_MODE(OP)) \
-+ && avr32_const_ok_for_constraint_p( \
-+ INTVAL(XEXP(XEXP(OP, 0), 1)), \
-+ (STR)[1], &(STR)[1]))) : \
-+ (C) == 'S' ? avr32_indexed_memory_operand(OP, GET_MODE(OP)) : \
-+ (C) == 'T' ? avr32_const_pool_ref_operand(OP, GET_MODE(OP)) : \
-+ (C) == 'U' ? SYMBOL_REF_RCALL_FUNCTION_P(OP) : \
-+ (C) == 'Z' ? avr32_cop_memory_operand(OP, GET_MODE(OP)) : \
-+ 0)
-+
-+
-+#define EXTRA_MEMORY_CONSTRAINT(C, STR) ( ((C) == 'R') || \
-+ ((C) == 'S') || \
-+ ((C) == 'Z') )
-+
-+
-+/* Returns nonzero if op is a function SYMBOL_REF which
-+ can be called using an rcall instruction */
-+#define SYMBOL_REF_RCALL_FUNCTION_P(op) \
-+ ( GET_CODE(op) == SYMBOL_REF \
-+ && SYMBOL_REF_FUNCTION_P(op) \
-+ && SYMBOL_REF_LOCAL_P(op) \
-+ && !SYMBOL_REF_EXTERNAL_P(op) \
-+ && !TARGET_HAS_ASM_ADDR_PSEUDOS )
-+
-+/******************************************************************************
-+ * Stack Layout and Calling Conventions
-+ *****************************************************************************/
-+
-+/** Basic Stack Layout **/
-+
-+/*
-+Define this macro if pushing a word onto the stack moves the stack
-+pointer to a smaller address.
-+
-+When we say, ``define this macro if ...,'' it means that the
-+compiler checks this macro only with #ifdef so the precise
-+definition used does not matter.
-+*/
-+/* pushm decrece SP: *(--SP) <-- Rx */
-+#define STACK_GROWS_DOWNWARD
-+
-+/*
-+This macro defines the operation used when something is pushed
-+on the stack. In RTL, a push operation will be
-+(set (mem (STACK_PUSH_CODE (reg sp))) ...)
-+
-+The choices are PRE_DEC, POST_DEC, PRE_INC,
-+and POST_INC. Which of these is correct depends on
-+the stack direction and on whether the stack pointer points
-+to the last item on the stack or whether it points to the
-+space for the next item on the stack.
-+
-+The default is PRE_DEC when STACK_GROWS_DOWNWARD is
-+defined, which is almost always right, and PRE_INC otherwise,
-+which is often wrong.
-+*/
-+/* pushm: *(--SP) <-- Rx */
-+#define STACK_PUSH_CODE PRE_DEC
-+
-+/* Define this to nonzero if the nominal address of the stack frame
-+ is at the high-address end of the local variables;
-+ that is, each additional local variable allocated
-+ goes at a more negative offset in the frame. */
-+#define FRAME_GROWS_DOWNWARD 1
-+
-+
-+/*
-+Offset from the frame pointer to the first local variable slot to be allocated.
-+
-+If FRAME_GROWS_DOWNWARD, find the next slot's offset by
-+subtracting the first slot's length from STARTING_FRAME_OFFSET.
-+Otherwise, it is found by adding the length of the first slot to the
-+value STARTING_FRAME_OFFSET.
-+ (i'm not sure if the above is still correct.. had to change it to get
-+ rid of an overfull. --mew 2feb93 )
-+*/
-+#define STARTING_FRAME_OFFSET 0
-+
-+/*
-+Offset from the stack pointer register to the first location at which
-+outgoing arguments are placed. If not specified, the default value of
-+zero is used. This is the proper value for most machines.
-+
-+If ARGS_GROW_DOWNWARD, this is the offset to the location above
-+the first location at which outgoing arguments are placed.
-+*/
-+#define STACK_POINTER_OFFSET 0
-+
-+/*
-+Offset from the argument pointer register to the first argument's
-+address. On some machines it may depend on the data type of the
-+function.
-+
-+If ARGS_GROW_DOWNWARD, this is the offset to the location above
-+the first argument's address.
-+*/
-+#define FIRST_PARM_OFFSET(FUNDECL) 0
-+
-+
-+/*
-+A C expression whose value is RTL representing the address in a stack
-+frame where the pointer to the caller's frame is stored. Assume that
-+FRAMEADDR is an RTL expression for the address of the stack frame
-+itself.
-+
-+If you don't define this macro, the default is to return the value
-+of FRAMEADDR - that is, the stack frame address is also the
-+address of the stack word that points to the previous frame.
-+*/
-+#define DYNAMIC_CHAIN_ADDRESS(FRAMEADDR) plus_constant ((FRAMEADDR), 4)
-+
-+
-+/*
-+A C expression whose value is RTL representing the value of the return
-+address for the frame COUNT steps up from the current frame, after
-+the prologue. FRAMEADDR is the frame pointer of the COUNT
-+frame, or the frame pointer of the COUNT - 1 frame if
-+RETURN_ADDR_IN_PREVIOUS_FRAME is defined.
-+
-+The value of the expression must always be the correct address when
-+COUNT is zero, but may be NULL_RTX if there is not way to
-+determine the return address of other frames.
-+*/
-+#define RETURN_ADDR_RTX(COUNT, FRAMEADDR) avr32_return_addr(COUNT, FRAMEADDR)
-+
-+
-+/*
-+A C expression whose value is RTL representing the location of the
-+incoming return address at the beginning of any function, before the
-+prologue. This RTL is either a REG, indicating that the return
-+value is saved in 'REG', or a MEM representing a location in
-+the stack.
-+
-+You only need to define this macro if you want to support call frame
-+debugging information like that provided by DWARF 2.
-+
-+If this RTL is a REG, you should also define
-+DWARF_FRAME_RETURN_COLUMN to DWARF_FRAME_REGNUM (REGNO).
-+*/
-+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LR_REGNUM)
-+
-+
-+
-+/*
-+A C expression whose value is an integer giving the offset, in bytes,
-+from the value of the stack pointer register to the top of the stack
-+frame at the beginning of any function, before the prologue. The top of
-+the frame is defined to be the value of the stack pointer in the
-+previous frame, just before the call instruction.
-+
-+You only need to define this macro if you want to support call frame
-+debugging information like that provided by DWARF 2.
-+*/
-+#define INCOMING_FRAME_SP_OFFSET 0
-+
-+
-+/** Exception Handling Support **/
-+
-+/* Use setjump/longjump for exception handling. */
-+#define DWARF2_UNWIND_INFO 0
-+#define MUST_USE_SJLJ_EXCEPTIONS 1
-+
-+/*
-+A C expression whose value is the Nth register number used for
-+data by exception handlers, or INVALID_REGNUM if fewer than
-+N registers are usable.
-+
-+The exception handling library routines communicate with the exception
-+handlers via a set of agreed upon registers. Ideally these registers
-+should be call-clobbered; it is possible to use call-saved registers,
-+but may negatively impact code size. The target must support at least
-+2 data registers, but should define 4 if there are enough free registers.
-+
-+You must define this macro if you want to support call frame exception
-+handling like that provided by DWARF 2.
-+*/
-+/*
-+ Use r9-r11
-+*/
-+#define EH_RETURN_DATA_REGNO(N) \
-+ ((N<3) ? INTERNAL_REGNUM(N+9) : INVALID_REGNUM)
-+
-+/*
-+A C expression whose value is RTL representing a location in which
-+to store a stack adjustment to be applied before function return.
-+This is used to unwind the stack to an exception handler's call frame.
-+It will be assigned zero on code paths that return normally.
-+
-+Typically this is a call-clobbered hard register that is otherwise
-+untouched by the epilogue, but could also be a stack slot.
-+
-+You must define this macro if you want to support call frame exception
-+handling like that provided by DWARF 2.
-+*/
-+/*
-+ Use r8
-+*/
-+#define EH_RETURN_STACKADJ_REGNO INTERNAL_REGNUM(8)
-+#define EH_RETURN_STACKADJ_RTX gen_rtx_REG(SImode, EH_RETURN_STACKADJ_REGNO)
-+
-+/*
-+A C expression whose value is RTL representing a location in which
-+to store the address of an exception handler to which we should
-+return. It will not be assigned on code paths that return normally.
-+
-+Typically this is the location in the call frame at which the normal
-+return address is stored. For targets that return by popping an
-+address off the stack, this might be a memory address just below
-+the target call frame rather than inside the current call
-+frame. EH_RETURN_STACKADJ_RTX will have already been assigned,
-+so it may be used to calculate the location of the target call frame.
-+
-+Some targets have more complex requirements than storing to an
-+address calculable during initial code generation. In that case
-+the eh_return instruction pattern should be used instead.
-+
-+If you want to support call frame exception handling, you must
-+define either this macro or the eh_return instruction pattern.
-+*/
-+/*
-+ We define the eh_return instruction pattern, so this isn't needed.
-+*/
-+/* #define EH_RETURN_HANDLER_RTX gen_rtx_REG(Pmode, RET_REGISTER) */
-+
-+/*
-+ This macro chooses the encoding of pointers embedded in the
-+ exception handling sections. If at all possible, this should be
-+ defined such that the exception handling section will not require
-+ dynamic relocations, and so may be read-only.
-+
-+ code is 0 for data, 1 for code labels, 2 for function
-+ pointers. global is true if the symbol may be affected by dynamic
-+ relocations. The macro should return a combination of the DW_EH_PE_*
-+ defines as found in dwarf2.h.
-+
-+ If this macro is not defined, pointers will not be encoded but
-+ represented directly.
-+*/
-+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE, GLOBAL) \
-+ ((flag_pic && (GLOBAL) ? DW_EH_PE_indirect : 0) \
-+ | (flag_pic ? DW_EH_PE_pcrel : DW_EH_PE_absptr) \
-+ | DW_EH_PE_sdata4)
-+
-+/* ToDo: The rest of this subsection */
-+
-+/** Specifying How Stack Checking is Done **/
-+/* ToDo: All in this subsection */
-+
-+/** Registers That Address the Stack Frame **/
-+
-+/*
-+The register number of the stack pointer register, which must also be a
-+fixed register according to FIXED_REGISTERS. On most machines,
-+the hardware determines which register this is.
-+*/
-+/* Using r13 as stack pointer. */
-+#define STACK_POINTER_REGNUM INTERNAL_REGNUM(13)
-+
-+/*
-+The register number of the frame pointer register, which is used to
-+access automatic variables in the stack frame. On some machines, the
-+hardware determines which register this is. On other machines, you can
-+choose any register you wish for this purpose.
-+*/
-+/* Use r7 */
-+#define FRAME_POINTER_REGNUM INTERNAL_REGNUM(7)
-+
-+
-+
-+/*
-+The register number of the arg pointer register, which is used to access
-+the function's argument list. On some machines, this is the same as the
-+frame pointer register. On some machines, the hardware determines which
-+register this is. On other machines, you can choose any register you
-+wish for this purpose. If this is not the same register as the frame
-+pointer register, then you must mark it as a fixed register according to
-+FIXED_REGISTERS, or arrange to be able to eliminate it (see Section
-+10.10.5 [Elimination], page 224).
-+*/
-+/* Using r5 */
-+#define ARG_POINTER_REGNUM INTERNAL_REGNUM(4)
-+
-+
-+/*
-+Register numbers used for passing a function's static chain pointer. If
-+register windows are used, the register number as seen by the called
-+function is STATIC_CHAIN_INCOMING_REGNUM, while the register
-+number as seen by the calling function is STATIC_CHAIN_REGNUM. If
-+these registers are the same, STATIC_CHAIN_INCOMING_REGNUM need
-+not be defined.
-+
-+The static chain register need not be a fixed register.
-+
-+If the static chain is passed in memory, these macros should not be
-+defined; instead, the next two macros should be defined.
-+*/
-+/* Using r0 */
-+#define STATIC_CHAIN_REGNUM INTERNAL_REGNUM(0)
-+
-+
-+/** Eliminating Frame Pointer and Arg Pointer **/
-+
-+/*
-+A C expression which is nonzero if a function must have and use a frame
-+pointer. This expression is evaluated in the reload pass. If its value is
-+nonzero the function will have a frame pointer.
-+
-+The expression can in principle examine the current function and decide
-+according to the facts, but on most machines the constant 0 or the
-+constant 1 suffices. Use 0 when the machine allows code to be generated
-+with no frame pointer, and doing so saves some time or space. Use 1
-+when there is no possible advantage to avoiding a frame pointer.
-+
-+In certain cases, the compiler does not know how to produce valid code
-+without a frame pointer. The compiler recognizes those cases and
-+automatically gives the function a frame pointer regardless of what
-+FRAME_POINTER_REQUIRED says. You don't need to worry about
-+them.
-+
-+In a function that does not require a frame pointer, the frame pointer
-+register can be allocated for ordinary usage, unless you mark it as a
-+fixed register. See FIXED_REGISTERS for more information.
-+*/
-+/* We need the frame pointer when compiling for profiling */
-+#define FRAME_POINTER_REQUIRED (current_function_profile)
-+
-+/*
-+A C statement to store in the variable DEPTH_VAR the difference
-+between the frame pointer and the stack pointer values immediately after
-+the function prologue. The value would be computed from information
-+such as the result of get_frame_size () and the tables of
-+registers regs_ever_live and call_used_regs.
-+
-+If ELIMINABLE_REGS is defined, this macro will be not be used and
-+need not be defined. Otherwise, it must be defined even if
-+FRAME_POINTER_REQUIRED is defined to always be true; in that
-+case, you may set DEPTH_VAR to anything.
-+*/
-+#define INITIAL_FRAME_POINTER_OFFSET(DEPTH_VAR) ((DEPTH_VAR) = get_frame_size())
-+
-+/*
-+If defined, this macro specifies a table of register pairs used to
-+eliminate unneeded registers that point into the stack frame. If it is not
-+defined, the only elimination attempted by the compiler is to replace
-+references to the frame pointer with references to the stack pointer.
-+
-+The definition of this macro is a list of structure initializations, each
-+of which specifies an original and replacement register.
-+
-+On some machines, the position of the argument pointer is not known until
-+the compilation is completed. In such a case, a separate hard register
-+must be used for the argument pointer. This register can be eliminated by
-+replacing it with either the frame pointer or the argument pointer,
-+depending on whether or not the frame pointer has been eliminated.
-+
-+In this case, you might specify:
-+ #define ELIMINABLE_REGS \
-+ {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
-+ {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
-+ {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
-+
-+Note that the elimination of the argument pointer with the stack pointer is
-+specified first since that is the preferred elimination.
-+*/
-+#define ELIMINABLE_REGS \
-+{ \
-+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
-+ { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
-+ { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM } \
-+}
-+
-+/*
-+A C expression that returns nonzero if the compiler is allowed to try
-+to replace register number FROM with register number
-+TO. This macro need only be defined if ELIMINABLE_REGS
-+is defined, and will usually be the constant 1, since most of the cases
-+preventing register elimination are things that the compiler already
-+knows about.
-+*/
-+#define CAN_ELIMINATE(FROM, TO) 1
-+
-+/*
-+This macro is similar to INITIAL_FRAME_POINTER_OFFSET. It
-+specifies the initial difference between the specified pair of
-+registers. This macro must be defined if ELIMINABLE_REGS is
-+defined.
-+*/
-+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
-+ ((OFFSET) = avr32_initial_elimination_offset(FROM, TO))
-+
-+/** Passing Function Arguments on the Stack **/
-+
-+
-+/*
-+A C expression. If nonzero, push insns will be used to pass
-+outgoing arguments.
-+If the target machine does not have a push instruction, set it to zero.
-+That directs GCC to use an alternate strategy: to
-+allocate the entire argument block and then store the arguments into
-+it. When PUSH_ARGS is nonzero, PUSH_ROUNDING must be defined too.
-+*/
-+#define PUSH_ARGS 1
-+
-+
-+/*
-+A C expression that is the number of bytes actually pushed onto the
-+stack when an instruction attempts to push NPUSHED bytes.
-+
-+On some machines, the definition
-+
-+ #define PUSH_ROUNDING(BYTES) (BYTES)
-+
-+will suffice. But on other machines, instructions that appear
-+to push one byte actually push two bytes in an attempt to maintain
-+alignment. Then the definition should be
-+
-+ #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & ~1)
-+*/
-+/* Push 4 bytes at the time. */
-+#define PUSH_ROUNDING(NPUSHED) (((NPUSHED) + 3) & ~3)
-+
-+/*
-+A C expression. If nonzero, the maximum amount of space required for
-+outgoing arguments will be computed and placed into the variable
-+current_function_outgoing_args_size. No space will be pushed
-+onto the stack for each call; instead, the function prologue should
-+increase the stack frame size by this amount.
-+
-+Setting both PUSH_ARGS and ACCUMULATE_OUTGOING_ARGS is not proper.
-+*/
-+#define ACCUMULATE_OUTGOING_ARGS 0
-+
-+
-+
-+
-+/*
-+A C expression that should indicate the number of bytes of its own
-+arguments that a function pops on returning, or 0 if the
-+function pops no arguments and the caller must therefore pop them all
-+after the function returns.
-+
-+FUNDECL is a C variable whose value is a tree node that describes
-+the function in question. Normally it is a node of type
-+FUNCTION_DECL that describes the declaration of the function.
-+From this you can obtain the DECL_ATTRIBUTES of the function.
-+
-+FUNTYPE is a C variable whose value is a tree node that
-+describes the function in question. Normally it is a node of type
-+FUNCTION_TYPE that describes the data type of the function.
-+From this it is possible to obtain the data types of the value and
-+arguments (if known).
-+
-+When a call to a library function is being considered, FUNDECL
-+will contain an identifier node for the library function. Thus, if
-+you need to distinguish among various library functions, you can do so
-+by their names. Note that ``library function'' in this context means
-+a function used to perform arithmetic, whose name is known specially
-+in the compiler and was not mentioned in the C code being compiled.
-+
-+STACK_SIZE is the number of bytes of arguments passed on the
-+stack. If a variable number of bytes is passed, it is zero, and
-+argument popping will always be the responsibility of the calling function.
-+
-+On the VAX, all functions always pop their arguments, so the definition
-+of this macro is STACK_SIZE. On the 68000, using the standard
-+calling convention, no functions pop their arguments, so the value of
-+the macro is always 0 in this case. But an alternative calling
-+convention is available in which functions that take a fixed number of
-+arguments pop them but other functions (such as printf) pop
-+nothing (the caller pops all). When this convention is in use,
-+FUNTYPE is examined to determine whether a function takes a fixed
-+number of arguments.
-+*/
-+#define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0
-+
-+
-+/*Return true if this function can we use a single return instruction*/
-+#define USE_RETURN_INSN(ISCOND) avr32_use_return_insn(ISCOND)
-+
-+/*
-+A C expression that should indicate the number of bytes a call sequence
-+pops off the stack. It is added to the value of RETURN_POPS_ARGS
-+when compiling a function call.
-+
-+CUM is the variable in which all arguments to the called function
-+have been accumulated.
-+
-+On certain architectures, such as the SH5, a call trampoline is used
-+that pops certain registers off the stack, depending on the arguments
-+that have been passed to the function. Since this is a property of the
-+call site, not of the called function, RETURN_POPS_ARGS is not
-+appropriate.
-+*/
-+#define CALL_POPS_ARGS(CUM) 0
-+
-+/* Passing Arguments in Registers */
-+
-+/*
-+A C expression that controls whether a function argument is passed
-+in a register, and which register.
-+
-+The arguments are CUM, which summarizes all the previous
-+arguments; MODE, the machine mode of the argument; TYPE,
-+the data type of the argument as a tree node or 0 if that is not known
-+(which happens for C support library functions); and NAMED,
-+which is 1 for an ordinary argument and 0 for nameless arguments that
-+correspond to '...' in the called function's prototype.
-+TYPE can be an incomplete type if a syntax error has previously
-+occurred.
-+
-+The value of the expression is usually either a reg RTX for the
-+hard register in which to pass the argument, or zero to pass the
-+argument on the stack.
-+
-+For machines like the VAX and 68000, where normally all arguments are
-+pushed, zero suffices as a definition.
-+
-+The value of the expression can also be a parallel RTX. This is
-+used when an argument is passed in multiple locations. The mode of the
-+of the parallel should be the mode of the entire argument. The
-+parallel holds any number of expr_list pairs; each one
-+describes where part of the argument is passed. In each
-+expr_list the first operand must be a reg RTX for the hard
-+register in which to pass this part of the argument, and the mode of the
-+register RTX indicates how large this part of the argument is. The
-+second operand of the expr_list is a const_int which gives
-+the offset in bytes into the entire argument of where this part starts.
-+As a special exception the first expr_list in the parallel
-+RTX may have a first operand of zero. This indicates that the entire
-+argument is also stored on the stack.
-+
-+The last time this macro is called, it is called with MODE == VOIDmode,
-+and its result is passed to the call or call_value
-+pattern as operands 2 and 3 respectively.
-+
-+The usual way to make the ISO library 'stdarg.h' work on a machine
-+where some arguments are usually passed in registers, is to cause
-+nameless arguments to be passed on the stack instead. This is done
-+by making FUNCTION_ARG return 0 whenever NAMED is 0.
-+
-+You may use the macro MUST_PASS_IN_STACK (MODE, TYPE)
-+in the definition of this macro to determine if this argument is of a
-+type that must be passed in the stack. If REG_PARM_STACK_SPACE
-+is not defined and FUNCTION_ARG returns nonzero for such an
-+argument, the compiler will abort. If REG_PARM_STACK_SPACE is
-+defined, the argument will be computed in the stack and then loaded into
-+a register. */
-+
-+#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
-+ avr32_function_arg(&(CUM), MODE, TYPE, NAMED)
-+
-+
-+
-+
-+/*
-+A C type for declaring a variable that is used as the first argument of
-+FUNCTION_ARG and other related values. For some target machines,
-+the type int suffices and can hold the number of bytes of
-+argument so far.
-+
-+There is no need to record in CUMULATIVE_ARGS anything about the
-+arguments that have been passed on the stack. The compiler has other
-+variables to keep track of that. For target machines on which all
-+arguments are passed on the stack, there is no need to store anything in
-+CUMULATIVE_ARGS; however, the data structure must exist and
-+should not be empty, so use int.
-+*/
-+typedef struct avr32_args
-+{
-+ /* Index representing the argument register the current function argument
-+ will occupy */
-+ int index;
-+ /* A mask with bits representing the argument registers: if a bit is set
-+ then this register is used for an arguemnt */
-+ int used_index;
-+ /* TRUE if this function has anonymous arguments */
-+ int uses_anonymous_args;
-+ /* The size in bytes of the named arguments pushed on the stack */
-+ int stack_pushed_args_size;
-+ /* Set to true if this function needs a Return Value Pointer */
-+ int use_rvp;
-+
-+} CUMULATIVE_ARGS;
-+
-+
-+#define FIRST_CUM_REG_INDEX 0
-+#define LAST_CUM_REG_INDEX 4
-+#define GET_REG_INDEX(CUM) ((CUM)->index)
-+#define SET_REG_INDEX(CUM, INDEX) ((CUM)->index = (INDEX));
-+#define GET_USED_INDEX(CUM, INDEX) ((CUM)->used_index & (1 << (INDEX)))
-+#define SET_USED_INDEX(CUM, INDEX) \
-+ do \
-+ { \
-+ if (INDEX >= 0) \
-+ (CUM)->used_index |= (1 << (INDEX)); \
-+ } \
-+ while (0)
-+#define SET_INDEXES_UNUSED(CUM) ((CUM)->used_index = 0)
-+
-+
-+/*
-+ A C statement (sans semicolon) for initializing the variable cum for the
-+ state at the beginning of the argument list. The variable has type
-+ CUMULATIVE_ARGS. The value of FNTYPE is the tree node for the data type of
-+ the function which will receive the args, or 0 if the args are to a compiler
-+ support library function. For direct calls that are not libcalls, FNDECL
-+ contain the declaration node of the function. FNDECL is also set when
-+ INIT_CUMULATIVE_ARGS is used to find arguments for the function being
-+ compiled. N_NAMED_ARGS is set to the number of named arguments, including a
-+ structure return address if it is passed as a parameter, when making a call.
-+ When processing incoming arguments, N_NAMED_ARGS is set to -1.
-+
-+ When processing a call to a compiler support library function, LIBNAME
-+ identifies which one. It is a symbol_ref rtx which contains the name of the
-+ function, as a string. LIBNAME is 0 when an ordinary C function call is
-+ being processed. Thus, each time this macro is called, either LIBNAME or
-+ FNTYPE is nonzero, but never both of them at once.
-+*/
-+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
-+ avr32_init_cumulative_args(&(CUM), FNTYPE, LIBNAME, FNDECL)
-+
-+
-+/*
-+A C statement (sans semicolon) to update the summarizer variable
-+CUM to advance past an argument in the argument list. The
-+values MODE, TYPE and NAMED describe that argument.
-+Once this is done, the variable CUM is suitable for analyzing
-+the following argument with FUNCTION_ARG, etc.
-+
-+This macro need not do anything if the argument in question was passed
-+on the stack. The compiler knows how to track the amount of stack space
-+used for arguments without any special help.
-+*/
-+#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
-+ avr32_function_arg_advance(&(CUM), MODE, TYPE, NAMED)
-+
-+/*
-+If defined, a C expression which determines whether, and in which direction,
-+to pad out an argument with extra space. The value should be of type
-+enum direction: either 'upward' to pad above the argument,
-+'downward' to pad below, or 'none' to inhibit padding.
-+
-+The amount of padding is always just enough to reach the next
-+multiple of FUNCTION_ARG_BOUNDARY; this macro does not control
-+it.
-+
-+This macro has a default definition which is right for most systems.
-+For little-endian machines, the default is to pad upward. For
-+big-endian machines, the default is to pad downward for an argument of
-+constant size shorter than an int, and upward otherwise.
-+*/
-+#define FUNCTION_ARG_PADDING(MODE, TYPE) \
-+ avr32_function_arg_padding(MODE, TYPE)
-+
-+/*
-+ Specify padding for the last element of a block move between registers
-+ and memory. First is nonzero if this is the only element. Defining
-+ this macro allows better control of register function parameters on
-+ big-endian machines, without using PARALLEL rtl. In particular,
-+ MUST_PASS_IN_STACK need not test padding and mode of types in registers,
-+ as there is no longer a "wrong" part of a register; For example, a three
-+ byte aggregate may be passed in the high part of a register if so required.
-+*/
-+#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
-+ avr32_function_arg_padding(MODE, TYPE)
-+
-+/*
-+If defined, a C expression which determines whether the default
-+implementation of va_arg will attempt to pad down before reading the
-+next argument, if that argument is smaller than its aligned space as
-+controlled by PARM_BOUNDARY. If this macro is not defined, all such
-+arguments are padded down if BYTES_BIG_ENDIAN is true.
-+*/
-+#define PAD_VARARGS_DOWN \
-+ (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
-+
-+
-+/*
-+A C expression that is nonzero if REGNO is the number of a hard
-+register in which function arguments are sometimes passed. This does
-+not include implicit arguments such as the static chain and
-+the structure-value address. On many machines, no registers can be
-+used for this purpose since all function arguments are pushed on the
-+stack.
-+*/
-+/*
-+ Use r8 - r12 for function arguments.
-+*/
-+#define FUNCTION_ARG_REGNO_P(REGNO) \
-+ (REGNO >= 3 && REGNO <= 7)
-+
-+/* Number of registers used for passing function arguments */
-+#define NUM_ARG_REGS 5
-+
-+/*
-+If defined, the order in which arguments are loaded into their
-+respective argument registers is reversed so that the last
-+argument is loaded first. This macro only affects arguments
-+passed in registers.
-+*/
-+/* #define LOAD_ARGS_REVERSED */
-+
-+/** How Scalar Function Values Are Returned **/
-+
-+/* AVR32 is using r12 as return register. */
-+#define RET_REGISTER (15 - 12)
-+
-+
-+/*
-+A C expression to create an RTX representing the place where a library
-+function returns a value of mode MODE. If the precise function
-+being called is known, FUNC is a tree node
-+(FUNCTION_DECL) for it; otherwise, func is a null
-+pointer. This makes it possible to use a different value-returning
-+convention for specific functions when all their calls are
-+known.
-+
-+Note that "library function" in this context means a compiler
-+support routine, used to perform arithmetic, whose name is known
-+specially by the compiler and was not mentioned in the C code being
-+compiled.
-+
-+The definition of LIBRARY_VALUE need not be concerned aggregate
-+data types, because none of the library functions returns such types.
-+*/
-+#define LIBCALL_VALUE(MODE) avr32_libcall_value(MODE)
-+
-+/*
-+A C expression that is nonzero if REGNO is the number of a hard
-+register in which the values of called function may come back.
-+
-+A register whose use for returning values is limited to serving as the
-+second of a pair (for a value of type double, say) need not be
-+recognized by this macro. So for most machines, this definition
-+suffices:
-+ #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
-+
-+If the machine has register windows, so that the caller and the called
-+function use different registers for the return value, this macro
-+should recognize only the caller's register numbers.
-+*/
-+/*
-+ When returning a value of mode DImode, r11:r10 is used, else r12 is used.
-+*/
-+#define FUNCTION_VALUE_REGNO_P(REGNO) ((REGNO) == RET_REGISTER \
-+ || (REGNO) == INTERNAL_REGNUM(11))
-+
-+
-+/** How Large Values Are Returned **/
-+
-+
-+/*
-+Define this macro to be 1 if all structure and union return values must be
-+in memory. Since this results in slower code, this should be defined
-+only if needed for compatibility with other compilers or with an ABI.
-+If you define this macro to be 0, then the conventions used for structure
-+and union return values are decided by the RETURN_IN_MEMORY macro.
-+
-+If not defined, this defaults to the value 1.
-+*/
-+#define DEFAULT_PCC_STRUCT_RETURN 0
-+
-+
-+
-+
-+/** Generating Code for Profiling **/
-+
-+/*
-+A C statement or compound statement to output to FILE some
-+assembler code to call the profiling subroutine mcount.
-+
-+The details of how mcount expects to be called are determined by
-+your operating system environment, not by GCC. To figure them out,
-+compile a small program for profiling using the system's installed C
-+compiler and look at the assembler code that results.
-+
-+Older implementations of mcount expect the address of a counter
-+variable to be loaded into some register. The name of this variable is
-+'LP' followed by the number LABELNO, so you would generate
-+the name using 'LP%d' in a fprintf.
-+*/
-+/* ToDo: fixme */
-+#ifndef FUNCTION_PROFILER
-+#define FUNCTION_PROFILER(FILE, LABELNO) \
-+ fprintf((FILE), "/* profiler %d */", (LABELNO))
-+#endif
-+
-+
-+/*****************************************************************************
-+ * Trampolines for Nested Functions *
-+ *****************************************************************************/
-+
-+/*
-+A C statement to output, on the stream FILE, assembler code for a
-+block of data that contains the constant parts of a trampoline. This
-+code should not include a label - the label is taken care of
-+automatically.
-+
-+If you do not define this macro, it means no template is needed
-+for the target. Do not define this macro on systems where the block move
-+code to copy the trampoline into place would be larger than the code
-+to generate it on the spot.
-+*/
-+/* ToDo: correct? */
-+#define TRAMPOLINE_TEMPLATE(FILE) avr32_trampoline_template(FILE);
-+
-+
-+/*
-+A C expression for the size in bytes of the trampoline, as an integer.
-+*/
-+/* ToDo: fixme */
-+#define TRAMPOLINE_SIZE 0x0C
-+
-+/*
-+Alignment required for trampolines, in bits.
-+
-+If you don't define this macro, the value of BIGGEST_ALIGNMENT
-+is used for aligning trampolines.
-+*/
-+#define TRAMPOLINE_ALIGNMENT 16
-+
-+/*
-+A C statement to initialize the variable parts of a trampoline.
-+ADDR is an RTX for the address of the trampoline; FNADDR is
-+an RTX for the address of the nested function; STATIC_CHAIN is an
-+RTX for the static chain value that should be passed to the function
-+when it is called.
-+*/
-+#define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, STATIC_CHAIN) \
-+ avr32_initialize_trampoline(ADDR, FNADDR, STATIC_CHAIN)
-+
-+
-+/******************************************************************************
-+ * Implicit Calls to Library Routines
-+ *****************************************************************************/
-+
-+/* Tail calling. */
-+
-+/* A C expression that evaluates to true if it is ok to perform a sibling
-+ call to DECL. */
-+#define FUNCTION_OK_FOR_SIBCALL(DECL) 0
-+
-+#define OVERRIDE_OPTIONS avr32_override_options ()
-+
-+#define OPTIMIZATION_OPTIONS(LEVEL, SIZE) avr32_optimization_options (LEVEL, SIZE)
-+
-+
-+/******************************************************************************
-+ * Addressing Modes
-+ *****************************************************************************/
-+
-+/*
-+A C expression that is nonzero if the machine supports pre-increment,
-+pre-decrement, post-increment, or post-decrement addressing respectively.
-+*/
-+/*
-+ AVR32 supports Rp++ and --Rp
-+*/
-+#define HAVE_PRE_INCREMENT 0
-+#define HAVE_PRE_DECREMENT 1
-+#define HAVE_POST_INCREMENT 1
-+#define HAVE_POST_DECREMENT 0
-+
-+/*
-+A C expression that is nonzero if the machine supports pre- or
-+post-address side-effect generation involving constants other than
-+the size of the memory operand.
-+*/
-+#define HAVE_PRE_MODIFY_DISP 0
-+#define HAVE_POST_MODIFY_DISP 0
-+
-+/*
-+A C expression that is nonzero if the machine supports pre- or
-+post-address side-effect generation involving a register displacement.
-+*/
-+#define HAVE_PRE_MODIFY_REG 0
-+#define HAVE_POST_MODIFY_REG 0
-+
-+/*
-+A C expression that is 1 if the RTX X is a constant which
-+is a valid address. On most machines, this can be defined as
-+CONSTANT_P (X), but a few machines are more restrictive
-+in which constant addresses are supported.
-+
-+CONSTANT_P accepts integer-values expressions whose values are
-+not explicitly known, such as symbol_ref, label_ref, and
-+high expressions and const arithmetic expressions, in
-+addition to const_int and const_double expressions.
-+*/
-+#define CONSTANT_ADDRESS_P(X) CONSTANT_P(X)
-+
-+/*
-+A number, the maximum number of registers that can appear in a valid
-+memory address. Note that it is up to you to specify a value equal to
-+the maximum number that GO_IF_LEGITIMATE_ADDRESS would ever
-+accept.
-+*/
-+#define MAX_REGS_PER_ADDRESS 2
-+
-+/*
-+A C compound statement with a conditional goto LABEL;
-+executed if X (an RTX) is a legitimate memory address on the
-+target machine for a memory operand of mode MODE.
-+
-+It usually pays to define several simpler macros to serve as
-+subroutines for this one. Otherwise it may be too complicated to
-+understand.
-+
-+This macro must exist in two variants: a strict variant and a
-+non-strict one. The strict variant is used in the reload pass. It
-+must be defined so that any pseudo-register that has not been
-+allocated a hard register is considered a memory reference. In
-+contexts where some kind of register is required, a pseudo-register
-+with no hard register must be rejected.
-+
-+The non-strict variant is used in other passes. It must be defined to
-+accept all pseudo-registers in every context where some kind of
-+register is required.
-+
-+Compiler source files that want to use the strict variant of this
-+macro define the macro REG_OK_STRICT. You should use an
-+#ifdef REG_OK_STRICT conditional to define the strict variant
-+in that case and the non-strict variant otherwise.
-+
-+Subroutines to check for acceptable registers for various purposes (one
-+for base registers, one for index registers, and so on) are typically
-+among the subroutines used to define GO_IF_LEGITIMATE_ADDRESS.
-+Then only these subroutine macros need have two variants; the higher
-+levels of macros may be the same whether strict or not.
-+
-+Normally, constant addresses which are the sum of a symbol_ref
-+and an integer are stored inside a const RTX to mark them as
-+constant. Therefore, there is no need to recognize such sums
-+specifically as legitimate addresses. Normally you would simply
-+recognize any const as legitimate.
-+
-+Usually PRINT_OPERAND_ADDRESS is not prepared to handle constant
-+sums that are not marked with const. It assumes that a naked
-+plus indicates indexing. If so, then you must reject such
-+naked constant sums as illegitimate addresses, so that none of them will
-+be given to PRINT_OPERAND_ADDRESS.
-+
-+On some machines, whether a symbolic address is legitimate depends on
-+the section that the address refers to. On these machines, define the
-+macro ENCODE_SECTION_INFO to store the information into the
-+symbol_ref, and then check for it here. When you see a
-+const, you will have to look inside it to find the
-+symbol_ref in order to determine the section.
-+
-+The best way to modify the name string is by adding text to the
-+beginning, with suitable punctuation to prevent any ambiguity. Allocate
-+the new name in saveable_obstack. You will have to modify
-+ASM_OUTPUT_LABELREF to remove and decode the added text and
-+output the name accordingly, and define STRIP_NAME_ENCODING to
-+access the original name string.
-+
-+You can check the information stored here into the symbol_ref in
-+the definitions of the macros GO_IF_LEGITIMATE_ADDRESS and
-+PRINT_OPERAND_ADDRESS.
-+*/
-+#ifdef REG_OK_STRICT
-+# define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \
-+ do \
-+ { \
-+ if (avr32_legitimate_address(MODE, X, 1)) \
-+ goto LABEL; \
-+ } \
-+ while (0)
-+#else
-+# define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \
-+ do \
-+ { \
-+ if (avr32_legitimate_address(MODE, X, 0)) \
-+ goto LABEL; \
-+ } \
-+ while (0)
-+#endif
-+
-+
-+
-+/*
-+A C compound statement that attempts to replace X with a valid
-+memory address for an operand of mode MODE. win will be a
-+C statement label elsewhere in the code; the macro definition may use
-+
-+ GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN);
-+
-+to avoid further processing if the address has become legitimate.
-+
-+X will always be the result of a call to break_out_memory_refs,
-+and OLDX will be the operand that was given to that function to produce
-+X.
-+
-+The code generated by this macro should not alter the substructure of
-+X. If it transforms X into a more legitimate form, it
-+should assign X (which will always be a C variable) a new value.
-+
-+It is not necessary for this macro to come up with a legitimate
-+address. The compiler has standard ways of doing so in all cases. In
-+fact, it is safe for this macro to do nothing. But often a
-+machine-dependent strategy can generate better code.
-+*/
-+#define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
-+ do \
-+ { \
-+ if (GET_CODE(X) == PLUS \
-+ && GET_CODE(XEXP(X, 0)) == REG \
-+ && GET_CODE(XEXP(X, 1)) == CONST_INT \
-+ && !CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(X, 1)), \
-+ 'K', "Ks16")) \
-+ { \
-+ rtx index = force_reg(SImode, XEXP(X, 1)); \
-+ X = gen_rtx_PLUS( SImode, XEXP(X, 0), index); \
-+ } \
-+ GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN); \
-+ } \
-+ while(0)
-+
-+
-+/*
-+A C statement or compound statement with a conditional
-+goto LABEL; executed if memory address X (an RTX) can have
-+different meanings depending on the machine mode of the memory
-+reference it is used for or if the address is valid for some modes
-+but not others.
-+
-+Autoincrement and autodecrement addresses typically have mode-dependent
-+effects because the amount of the increment or decrement is the size
-+of the operand being addressed. Some machines have other mode-dependent
-+addresses. Many RISC machines have no mode-dependent addresses.
-+
-+You may assume that ADDR is a valid address for the machine.
-+*/
-+#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL) \
-+ do \
-+ { \
-+ if (GET_CODE (ADDR) == POST_INC \
-+ || GET_CODE (ADDR) == PRE_DEC) \
-+ goto LABEL; \
-+ } \
-+ while (0)
-+
-+/*
-+A C expression that is nonzero if X is a legitimate constant for
-+an immediate operand on the target machine. You can assume that
-+X satisfies CONSTANT_P, so you need not check this. In fact,
-+'1' is a suitable definition for this macro on machines where
-+anything CONSTANT_P is valid.
-+*/
-+#define LEGITIMATE_CONSTANT_P(X) avr32_legitimate_constant_p(X)
-+
-+
-+/******************************************************************************
-+ * Condition Code Status
-+ *****************************************************************************/
-+
-+#define HAVE_conditional_move 1
-+
-+/*
-+C code for a data type which is used for declaring the mdep
-+component of cc_status. It defaults to int.
-+
-+This macro is not used on machines that do not use cc0.
-+*/
-+
-+typedef struct
-+{
-+ int flags;
-+ rtx value;
-+ int fpflags;
-+ rtx fpvalue;
-+} avr32_status_reg;
-+
-+
-+#define CC_STATUS_MDEP avr32_status_reg
-+
-+/*
-+A C expression to initialize the mdep field to "empty".
-+The default definition does nothing, since most machines don't use
-+the field anyway. If you want to use the field, you should probably
-+define this macro to initialize it.
-+
-+This macro is not used on machines that do not use cc0.
-+*/
-+
-+#define CC_STATUS_MDEP_INIT \
-+ (cc_status.mdep.flags = CC_NONE , cc_status.mdep.value = 0)
-+
-+#define FPCC_STATUS_INIT \
-+ (cc_status.mdep.fpflags = CC_NONE , cc_status.mdep.fpvalue = 0)
-+
-+/*
-+A C compound statement to set the components of cc_status
-+appropriately for an insn INSN whose body is EXP. It is
-+this macro's responsibility to recognize insns that set the condition
-+code as a byproduct of other activity as well as those that explicitly
-+set (cc0).
-+
-+This macro is not used on machines that do not use cc0.
-+
-+If there are insns that do not set the condition code but do alter
-+other machine registers, this macro must check to see whether they
-+invalidate the expressions that the condition code is recorded as
-+reflecting. For example, on the 68000, insns that store in address
-+registers do not set the condition code, which means that usually
-+NOTICE_UPDATE_CC can leave cc_status unaltered for such
-+insns. But suppose that the previous insn set the condition code
-+based on location 'a4@@(102)' and the current insn stores a new
-+value in 'a4'. Although the condition code is not changed by
-+this, it will no longer be true that it reflects the contents of
-+'a4@@(102)'. Therefore, NOTICE_UPDATE_CC must alter
-+cc_status in this case to say that nothing is known about the
-+condition code value.
-+
-+The definition of NOTICE_UPDATE_CC must be prepared to deal
-+with the results of peephole optimization: insns whose patterns are
-+parallel RTXs containing various reg, mem or
-+constants which are just the operands. The RTL structure of these
-+insns is not sufficient to indicate what the insns actually do. What
-+NOTICE_UPDATE_CC should do when it sees one is just to run
-+CC_STATUS_INIT.
-+
-+A possible definition of NOTICE_UPDATE_CC is to call a function
-+that looks at an attribute (see Insn Attributes) named, for example,
-+'cc'. This avoids having detailed information about patterns in
-+two places, the 'md' file and in NOTICE_UPDATE_CC.
-+*/
-+
-+#define NOTICE_UPDATE_CC(EXP, INSN) avr32_notice_update_cc(EXP, INSN)
-+
-+
-+
-+
-+/******************************************************************************
-+ * Describing Relative Costs of Operations
-+ *****************************************************************************/
-+
-+
-+
-+/*
-+A C expression for the cost of moving data of mode MODE from a
-+register in class FROM to one in class TO. The classes are
-+expressed using the enumeration values such as GENERAL_REGS. A
-+value of 2 is the default; other values are interpreted relative to
-+that.
-+
-+It is not required that the cost always equal 2 when FROM is the
-+same as TO; on some machines it is expensive to move between
-+registers if they are not general registers.
-+
-+If reload sees an insn consisting of a single set between two
-+hard registers, and if REGISTER_MOVE_COST applied to their
-+classes returns a value of 2, reload does not check to ensure that the
-+constraints of the insn are met. Setting a cost of other than 2 will
-+allow reload to verify that the constraints are met. You should do this
-+if the movm pattern's constraints do not allow such copying.
-+*/
-+#define REGISTER_MOVE_COST(MODE, FROM, TO) \
-+ ((GET_MODE_SIZE(MODE) <= 4) ? 2: \
-+ (GET_MODE_SIZE(MODE) <= 8) ? 3: \
-+ 4)
-+
-+/*
-+A C expression for the cost of moving data of mode MODE between a
-+register of class CLASS and memory; IN is zero if the value
-+is to be written to memory, nonzero if it is to be read in. This cost
-+is relative to those in REGISTER_MOVE_COST. If moving between
-+registers and memory is more expensive than between two registers, you
-+should define this macro to express the relative cost.
-+
-+If you do not define this macro, GCC uses a default cost of 4 plus
-+the cost of copying via a secondary reload register, if one is
-+needed. If your machine requires a secondary reload register to copy
-+between memory and a register of CLASS but the reload mechanism is
-+more complex than copying via an intermediate, define this macro to
-+reflect the actual cost of the move.
-+
-+GCC defines the function memory_move_secondary_cost if
-+secondary reloads are needed. It computes the costs due to copying via
-+a secondary register. If your machine copies from memory using a
-+secondary register in the conventional way but the default base value of
-+4 is not correct for your machine, define this macro to add some other
-+value to the result of that function. The arguments to that function
-+are the same as to this macro.
-+*/
-+/*
-+ Memory moves are costly
-+*/
-+#define MEMORY_MOVE_COST(MODE, CLASS, IN) \
-+ (((IN) ? ((GET_MODE_SIZE(MODE) < 4) ? 4 : \
-+ (GET_MODE_SIZE(MODE) > 8) ? 6 : \
-+ 3) \
-+ : ((GET_MODE_SIZE(MODE) > 8) ? 6 : 3)))
-+
-+/*
-+A C expression for the cost of a branch instruction. A value of 1 is
-+the default; other values are interpreted relative to that.
-+*/
-+ /* Try to use conditionals as much as possible */
-+#define BRANCH_COST (TARGET_BRANCH_PRED ? 3 : 4)
-+
-+/*A C expression for the maximum number of instructions to execute via conditional
-+ execution instructions instead of a branch. A value of BRANCH_COST+1 is the default
-+ if the machine does not use cc0, and 1 if it does use cc0.*/
-+#define MAX_CONDITIONAL_EXECUTE 4
-+
-+/*
-+Define this macro as a C expression which is nonzero if accessing less
-+than a word of memory (i.e.: a char or a short) is no
-+faster than accessing a word of memory, i.e., if such access
-+require more than one instruction or if there is no difference in cost
-+between byte and (aligned) word loads.
-+
-+When this macro is not defined, the compiler will access a field by
-+finding the smallest containing object; when it is defined, a fullword
-+load will be used if alignment permits. Unless bytes accesses are
-+faster than word accesses, using word accesses is preferable since it
-+may eliminate subsequent memory access if subsequent accesses occur to
-+other fields in the same word of the structure, but to different bytes.
-+*/
-+#define SLOW_BYTE_ACCESS 1
-+
-+
-+/*
-+Define this macro if it is as good or better to call a constant
-+function address than to call an address kept in a register.
-+*/
-+#define NO_FUNCTION_CSE
-+
-+
-+/******************************************************************************
-+ * Adjusting the Instruction Scheduler
-+ *****************************************************************************/
-+
-+/*****************************************************************************
-+ * Dividing the Output into Sections (Texts, Data, ...) *
-+ *****************************************************************************/
-+
-+/*
-+A C expression whose value is a string, including spacing, containing the
-+assembler operation that should precede instructions and read-only data.
-+Normally "\t.text" is right.
-+*/
-+#define TEXT_SECTION_ASM_OP "\t.text"
-+/*
-+A C statement that switches to the default section containing instructions.
-+Normally this is not needed, as simply defining TEXT_SECTION_ASM_OP
-+is enough. The MIPS port uses this to sort all functions after all data
-+declarations.
-+*/
-+/* #define TEXT_SECTION */
-+
-+/*
-+A C expression whose value is a string, including spacing, containing the
-+assembler operation to identify the following data as writable initialized
-+data. Normally "\t.data" is right.
-+*/
-+#define DATA_SECTION_ASM_OP "\t.data"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+shared data. If not defined, DATA_SECTION_ASM_OP will be used.
-+*/
-+
-+/*
-+A C expression whose value is a string, including spacing, containing
-+the assembler operation to identify the following data as read-only
-+initialized data.
-+*/
-+#undef READONLY_DATA_SECTION_ASM_OP
-+#define READONLY_DATA_SECTION_ASM_OP \
-+ ((TARGET_USE_RODATA_SECTION) ? \
-+ "\t.section\t.rodata" : \
-+ TEXT_SECTION_ASM_OP )
-+
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+uninitialized global data. If not defined, and neither
-+ASM_OUTPUT_BSS nor ASM_OUTPUT_ALIGNED_BSS are defined,
-+uninitialized global data will be output in the data section if
-+-fno-common is passed, otherwise ASM_OUTPUT_COMMON will be
-+used.
-+*/
-+#define BSS_SECTION_ASM_OP "\t.section\t.bss"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+uninitialized global shared data. If not defined, and
-+BSS_SECTION_ASM_OP is, the latter will be used.
-+*/
-+/*#define SHARED_BSS_SECTION_ASM_OP "\trseg\tshared_bbs_section:data:noroot(0)\n"*/
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+initialization code. If not defined, GCC will assume such a section does
-+not exist.
-+*/
-+#undef INIT_SECTION_ASM_OP
-+#define INIT_SECTION_ASM_OP "\t.section\t.init"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+finalization code. If not defined, GCC will assume such a section does
-+not exist.
-+*/
-+#undef FINI_SECTION_ASM_OP
-+#define FINI_SECTION_ASM_OP "\t.section\t.fini"
-+
-+/*
-+If defined, an ASM statement that switches to a different section
-+via SECTION_OP, calls FUNCTION, and switches back to
-+the text section. This is used in crtstuff.c if
-+INIT_SECTION_ASM_OP or FINI_SECTION_ASM_OP to calls
-+to initialization and finalization functions from the init and fini
-+sections. By default, this macro uses a simple function call. Some
-+ports need hand-crafted assembly code to avoid dependencies on
-+registers initialized in the function prologue or to ensure that
-+constant pools don't end up too far way in the text section.
-+*/
-+#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
-+ asm ( SECTION_OP "\n" \
-+ "mcall r6[" USER_LABEL_PREFIX #FUNC "@got]\n" \
-+ TEXT_SECTION_ASM_OP);
-+
-+
-+/*
-+Define this macro to be an expression with a nonzero value if jump
-+tables (for tablejump insns) should be output in the text
-+section, along with the assembler instructions. Otherwise, the
-+readonly data section is used.
-+
-+This macro is irrelevant if there is no separate readonly data section.
-+*/
-+/* Put jump tables in text section if we have caches. Otherwise assume that
-+ loading data from code memory is slow. */
-+#define JUMP_TABLES_IN_TEXT_SECTION \
-+ (TARGET_CACHES ? 1 : 0)
-+
-+
-+/******************************************************************************
-+ * Position Independent Code (PIC)
-+ *****************************************************************************/
-+
-+#ifndef AVR32_ALWAYS_PIC
-+#define AVR32_ALWAYS_PIC 0
-+#endif
-+
-+/* GOT is set to r6 */
-+#define PIC_OFFSET_TABLE_REGNUM INTERNAL_REGNUM(6)
-+
-+/*
-+A C expression that is nonzero if X is a legitimate immediate
-+operand on the target machine when generating position independent code.
-+You can assume that X satisfies CONSTANT_P, so you need not
-+check this. You can also assume flag_pic is true, so you need not
-+check it either. You need not define this macro if all constants
-+(including SYMBOL_REF) can be immediate operands when generating
-+position independent code.
-+*/
-+/* We can't directly access anything that contains a symbol,
-+ nor can we indirect via the constant pool. */
-+#define LEGITIMATE_PIC_OPERAND_P(X) avr32_legitimate_pic_operand_p(X)
-+
-+
-+/* We need to know when we are making a constant pool; this determines
-+ whether data needs to be in the GOT or can be referenced via a GOT
-+ offset. */
-+extern int making_const_table;
-+
-+/******************************************************************************
-+ * Defining the Output Assembler Language
-+ *****************************************************************************/
-+
-+
-+/*
-+A C string constant describing how to begin a comment in the target
-+assembler language. The compiler assumes that the comment will end at
-+the end of the line.
-+*/
-+#define ASM_COMMENT_START "# "
-+
-+/*
-+A C string constant for text to be output before each asm
-+statement or group of consecutive ones. Normally this is
-+"#APP", which is a comment that has no effect on most
-+assemblers but tells the GNU assembler that it must check the lines
-+that follow for all valid assembler constructs.
-+*/
-+#undef ASM_APP_ON
-+#define ASM_APP_ON "#APP\n"
-+
-+/*
-+A C string constant for text to be output after each asm
-+statement or group of consecutive ones. Normally this is
-+"#NO_APP", which tells the GNU assembler to resume making the
-+time-saving assumptions that are valid for ordinary compiler output.
-+*/
-+#undef ASM_APP_OFF
-+#define ASM_APP_OFF "#NO_APP\n"
-+
-+
-+
-+#define FILE_ASM_OP "\t.file\n"
-+#define IDENT_ASM_OP "\t.ident\t"
-+#define SET_ASM_OP "\t.set\t"
-+
-+
-+/*
-+ * Output assembly directives to switch to section name. The section
-+ * should have attributes as specified by flags, which is a bit mask
-+ * of the SECTION_* flags defined in 'output.h'. If align is nonzero,
-+ * it contains an alignment in bytes to be used for the section,
-+ * otherwise some target default should be used. Only targets that
-+ * must specify an alignment within the section directive need pay
-+ * attention to align -- we will still use ASM_OUTPUT_ALIGN.
-+ *
-+ * NOTE: This one must not be moved to avr32.c
-+ */
-+#undef TARGET_ASM_NAMED_SECTION
-+#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
-+
-+
-+/*
-+You may define this macro as a C expression. You should define the
-+expression to have a nonzero value if GCC should output the constant
-+pool for a function before the code for the function, or a zero value if
-+GCC should output the constant pool after the function. If you do
-+not define this macro, the usual case, GCC will output the constant
-+pool before the function.
-+*/
-+#define CONSTANT_POOL_BEFORE_FUNCTION 0
-+
-+
-+/*
-+Define this macro as a C expression which is nonzero if the constant
-+EXP, of type tree, should be output after the code for a
-+function. The compiler will normally output all constants before the
-+function; you need not define this macro if this is OK.
-+*/
-+#define CONSTANT_AFTER_FUNCTION_P(EXP) 1
-+
-+
-+/*
-+Define this macro as a C expression which is nonzero if C is
-+used as a logical line separator by the assembler.
-+
-+If you do not define this macro, the default is that only
-+the character ';' is treated as a logical line separator.
-+*/
-+#define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == '\n')
-+
-+
-+/** Output of Uninitialized Variables **/
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a common-label named
-+NAME whose size is SIZE bytes. The variable ROUNDED
-+is the size rounded up to whatever alignment the caller wants.
-+
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+
-+This macro controls how the assembler definitions of uninitialized
-+common global variables are output.
-+*/
-+/*
-+#define ASM_OUTPUT_COMMON(STREAM, NAME, SIZE, ROUNDED) \
-+ avr32_asm_output_common(STREAM, NAME, SIZE, ROUNDED)
-+*/
-+
-+#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
-+ do \
-+ { \
-+ fputs ("\t.comm ", (FILE)); \
-+ assemble_name ((FILE), (NAME)); \
-+ fprintf ((FILE), ",%d\n", (SIZE)); \
-+ } \
-+ while (0)
-+
-+/*
-+ * Like ASM_OUTPUT_BSS except takes the required alignment as a
-+ * separate, explicit argument. If you define this macro, it is used
-+ * in place of ASM_OUTPUT_BSS, and gives you more flexibility in
-+ * handling the required alignment of the variable. The alignment is
-+ * specified as the number of bits.
-+ *
-+ * Try to use function asm_output_aligned_bss defined in file varasm.c
-+ * when defining this macro.
-+ */
-+#define ASM_OUTPUT_ALIGNED_BSS(STREAM, DECL, NAME, SIZE, ALIGNMENT) \
-+ asm_output_aligned_bss (STREAM, DECL, NAME, SIZE, ALIGNMENT)
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a local-common-label named
-+NAME whose size is SIZE bytes. The variable ROUNDED
-+is the size rounded up to whatever alignment the caller wants.
-+
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+
-+This macro controls how the assembler definitions of uninitialized
-+static variables are output.
-+*/
-+#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
-+ do \
-+ { \
-+ fputs ("\t.lcomm ", (FILE)); \
-+ assemble_name ((FILE), (NAME)); \
-+ fprintf ((FILE), ",%d, %d\n", (SIZE), 2); \
-+ } \
-+ while (0)
-+
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a label named NAME.
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+*/
-+#define ASM_OUTPUT_LABEL(STREAM, NAME) avr32_asm_output_label(STREAM, NAME)
-+
-+/* A C string containing the appropriate assembler directive to
-+ * specify the size of a symbol, without any arguments. On systems
-+ * that use ELF, the default (in 'config/elfos.h') is '"\t.size\t"';
-+ * on other systems, the default is not to define this macro.
-+ *
-+ * Define this macro only if it is correct to use the default
-+ * definitions of ASM_ OUTPUT_SIZE_DIRECTIVE and
-+ * ASM_OUTPUT_MEASURED_SIZE for your system. If you need your own
-+ * custom definitions of those macros, or if you do not need explicit
-+ * symbol sizes at all, do not define this macro.
-+ */
-+#define SIZE_ASM_OP "\t.size\t"
-+
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM some commands that will make the label NAME global;
-+that is, available for reference from other files. Use the expression
-+assemble_name(STREAM, NAME) to output the name
-+itself; before and after that, output the additional assembler syntax
-+for making that name global, and a newline.
-+*/
-+#define GLOBAL_ASM_OP "\t.globl\t"
-+
-+
-+
-+/*
-+A C expression which evaluates to true if the target supports weak symbols.
-+
-+If you don't define this macro, defaults.h provides a default
-+definition. If either ASM_WEAKEN_LABEL or ASM_WEAKEN_DECL
-+is defined, the default definition is '1'; otherwise, it is
-+'0'. Define this macro if you want to control weak symbol support
-+with a compiler flag such as -melf.
-+*/
-+#define SUPPORTS_WEAK 1
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM a reference in assembler syntax to a label named
-+NAME. This should add '_' to the front of the name, if that
-+is customary on your operating system, as it is in most Berkeley Unix
-+systems. This macro is used in assemble_name.
-+*/
-+#define ASM_OUTPUT_LABELREF(STREAM, NAME) \
-+ avr32_asm_output_labelref(STREAM, NAME)
-+
-+
-+
-+/*
-+A C expression to assign to OUTVAR (which is a variable of type
-+char *) a newly allocated string made from the string
-+NAME and the number NUMBER, with some suitable punctuation
-+added. Use alloca to get space for the string.
-+
-+The string will be used as an argument to ASM_OUTPUT_LABELREF to
-+produce an assembler label for an internal static variable whose name is
-+NAME. Therefore, the string must be such as to result in valid
-+assembler code. The argument NUMBER is different each time this
-+macro is executed; it prevents conflicts between similarly-named
-+internal static variables in different scopes.
-+
-+Ideally this string should not be a valid C identifier, to prevent any
-+conflict with the user's own symbols. Most assemblers allow periods
-+or percent signs in assembler symbols; putting at least one of these
-+between the name and the number will suffice.
-+*/
-+#define ASM_FORMAT_PRIVATE_NAME(OUTVAR, NAME, NUMBER) \
-+ do \
-+ { \
-+ (OUTVAR) = (char *) alloca (strlen ((NAME)) + 10); \
-+ sprintf ((OUTVAR), "%s.%d", (NAME), (NUMBER)); \
-+ } \
-+ while (0)
-+
-+
-+/** Macros Controlling Initialization Routines **/
-+
-+
-+/*
-+If defined, main will not call __main as described above.
-+This macro should be defined for systems that control start-up code
-+on a symbol-by-symbol basis, such as OSF/1, and should not
-+be defined explicitly for systems that support INIT_SECTION_ASM_OP.
-+*/
-+/*
-+ __main is not defined when debugging.
-+*/
-+#define HAS_INIT_SECTION
-+
-+
-+/** Output of Assembler Instructions **/
-+
-+/*
-+A C initializer containing the assembler's names for the machine
-+registers, each one as a C string constant. This is what translates
-+register numbers in the compiler into assembler language.
-+*/
-+
-+#define REGISTER_NAMES \
-+{ \
-+ "pc", "lr", \
-+ "sp", "r12", \
-+ "r11", "r10", \
-+ "r9", "r8", \
-+ "r7", "r6", \
-+ "r5", "r4", \
-+ "r3", "r2", \
-+ "r1", "r0", \
-+ "f15","f14", \
-+ "f13","f12", \
-+ "f11","f10", \
-+ "f9", "f8", \
-+ "f7", "f6", \
-+ "f5", "f4", \
-+ "f3", "f2", \
-+ "f1", "f0" \
-+}
-+
-+/*
-+A C compound statement to output to stdio stream STREAM the
-+assembler syntax for an instruction operand X. X is an
-+RTL expression.
-+
-+CODE is a value that can be used to specify one of several ways
-+of printing the operand. It is used when identical operands must be
-+printed differently depending on the context. CODE comes from
-+the '%' specification that was used to request printing of the
-+operand. If the specification was just '%digit' then
-+CODE is 0; if the specification was '%ltr digit'
-+then CODE is the ASCII code for ltr.
-+
-+If X is a register, this macro should print the register's name.
-+The names can be found in an array reg_names whose type is
-+char *[]. reg_names is initialized from REGISTER_NAMES.
-+
-+When the machine description has a specification '%punct'
-+(a '%' followed by a punctuation character), this macro is called
-+with a null pointer for X and the punctuation character for
-+CODE.
-+*/
-+#define PRINT_OPERAND(STREAM, X, CODE) avr32_print_operand(STREAM, X, CODE)
-+
-+/* A C statement to be executed just prior to the output of
-+ assembler code for INSN, to modify the extracted operands so
-+ they will be output differently.
-+
-+ Here the argument OPVEC is the vector containing the operands
-+ extracted from INSN, and NOPERANDS is the number of elements of
-+ the vector which contain meaningful data for this insn.
-+ The contents of this vector are what will be used to convert the insn
-+ template into assembler code, so you can change the assembler output
-+ by changing the contents of the vector. */
-+#define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
-+ avr32_final_prescan_insn ((INSN), (OPVEC), (NOPERANDS))
-+
-+/*
-+A C expression which evaluates to true if CODE is a valid
-+punctuation character for use in the PRINT_OPERAND macro. If
-+PRINT_OPERAND_PUNCT_VALID_P is not defined, it means that no
-+punctuation characters (except for the standard one, '%') are used
-+in this way.
-+*/
-+/*
-+ 'm' refers to the most significant word in a two-register mode.
-+*/
-+#define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == 'm' || (CODE) == 'e')
-+
-+/*
-+A C compound statement to output to stdio stream STREAM the
-+assembler syntax for an instruction operand that is a memory reference
-+whose address is X. X is an RTL expression.
-+
-+On some machines, the syntax for a symbolic address depends on the
-+section that the address refers to. On these machines, define the macro
-+ENCODE_SECTION_INFO to store the information into the
-+symbol_ref, and then check for it here. (see Assembler Format.)
-+*/
-+#define PRINT_OPERAND_ADDRESS(STREAM, X) avr32_print_operand_address(STREAM, X)
-+
-+
-+/** Output of Dispatch Tables **/
-+
-+/*
-+ * A C statement to output to the stdio stream stream an assembler
-+ * pseudo-instruction to generate a difference between two
-+ * labels. value and rel are the numbers of two internal labels. The
-+ * definitions of these labels are output using
-+ * (*targetm.asm_out.internal_label), and they must be printed in the
-+ * same way here. For example,
-+ *
-+ * fprintf (stream, "\t.word L%d-L%d\n",
-+ * value, rel)
-+ *
-+ * You must provide this macro on machines where the addresses in a
-+ * dispatch table are relative to the table's own address. If defined,
-+ * GCC will also use this macro on all machines when producing
-+ * PIC. body is the body of the ADDR_DIFF_VEC; it is provided so that
-+ * the mode and flags can be read.
-+ */
-+#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
-+ fprintf(STREAM, "\tbral\t%sL%d\n", LOCAL_LABEL_PREFIX, VALUE)
-+
-+/*
-+This macro should be provided on machines where the addresses
-+in a dispatch table are absolute.
-+
-+The definition should be a C statement to output to the stdio stream
-+STREAM an assembler pseudo-instruction to generate a reference to
-+a label. VALUE is the number of an internal label whose
-+definition is output using ASM_OUTPUT_INTERNAL_LABEL.
-+For example,
-+
-+fprintf(STREAM, "\t.word L%d\n", VALUE)
-+*/
-+
-+#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
-+ fprintf(STREAM, "\t.long %sL%d\n", LOCAL_LABEL_PREFIX, VALUE)
-+
-+/** Assembler Commands for Exception Regions */
-+
-+/* ToDo: All of this subsection */
-+
-+/** Assembler Commands for Alignment */
-+
-+
-+/*
-+A C statement to output to the stdio stream STREAM an assembler
-+command to advance the location counter to a multiple of 2 to the
-+POWER bytes. POWER will be a C expression of type int.
-+*/
-+#define ASM_OUTPUT_ALIGN(STREAM, POWER) \
-+ do \
-+ { \
-+ if ((POWER) != 0) \
-+ fprintf(STREAM, "\t.align\t%d\n", POWER); \
-+ } \
-+ while (0)
-+
-+/*
-+Like ASM_OUTPUT_ALIGN, except that the \nop" instruction is used for padding, if
-+necessary.
-+*/
-+#define ASM_OUTPUT_ALIGN_WITH_NOP(STREAM, POWER) \
-+ fprintf(STREAM, "\t.balignw\t%d, 0xd703\n", (1 << POWER))
-+
-+
-+
-+/******************************************************************************
-+ * Controlling Debugging Information Format
-+ *****************************************************************************/
-+
-+/* How to renumber registers for dbx and gdb. */
-+#define DBX_REGISTER_NUMBER(REGNO) ASM_REGNUM (REGNO)
-+
-+/* The DWARF 2 CFA column which tracks the return address. */
-+#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM(LR_REGNUM)
-+
-+/*
-+Define this macro if GCC should produce dwarf version 2 format
-+debugging output in response to the -g option.
-+
-+To support optional call frame debugging information, you must also
-+define INCOMING_RETURN_ADDR_RTX and either set
-+RTX_FRAME_RELATED_P on the prologue insns if you use RTL for the
-+prologue, or call dwarf2out_def_cfa and dwarf2out_reg_save
-+as appropriate from TARGET_ASM_FUNCTION_PROLOGUE if you don't.
-+*/
-+#define DWARF2_DEBUGGING_INFO 1
-+
-+
-+#define DWARF2_ASM_LINE_DEBUG_INFO 1
-+#define DWARF2_FRAME_INFO 1
-+
-+
-+/******************************************************************************
-+ * Miscellaneous Parameters
-+ *****************************************************************************/
-+
-+/* ToDo: a lot */
-+
-+/*
-+An alias for a machine mode name. This is the machine mode that
-+elements of a jump-table should have.
-+*/
-+#define CASE_VECTOR_MODE SImode
-+
-+/*
-+Define this macro to be a C expression to indicate when jump-tables
-+should contain relative addresses. If jump-tables never contain
-+relative addresses, then you need not define this macro.
-+*/
-+#define CASE_VECTOR_PC_RELATIVE 0
-+
-+/* Increase the threshold for using table jumps on the UC arch. */
-+#define CASE_VALUES_THRESHOLD ((avr32_arch->arch_type == ARCH_TYPE_AVR32_UC) ? 7 : 4)
-+
-+/*
-+The maximum number of bytes that a single instruction can move quickly
-+between memory and registers or between two memory locations.
-+*/
-+#define MOVE_MAX (2*UNITS_PER_WORD)
-+
-+
-+/* A C expression that is nonzero if on this machine the number of bits actually used
-+ for the count of a shift operation is equal to the number of bits needed to represent
-+ the size of the object being shifted. When this macro is nonzero, the compiler will
-+ assume that it is safe to omit a sign-extend, zero-extend, and certain bitwise 'and'
-+ instructions that truncates the count of a shift operation. On machines that have
-+ instructions that act on bit-fields at variable positions, which may include 'bit test'
-+ 378 GNU Compiler Collection (GCC) Internals
-+ instructions, a nonzero SHIFT_COUNT_TRUNCATED also enables deletion of truncations
-+ of the values that serve as arguments to bit-field instructions.
-+ If both types of instructions truncate the count (for shifts) and position (for bit-field
-+ operations), or if no variable-position bit-field instructions exist, you should define
-+ this macro.
-+ However, on some machines, such as the 80386 and the 680x0, truncation only applies
-+ to shift operations and not the (real or pretended) bit-field operations. Define SHIFT_
-+ COUNT_TRUNCATED to be zero on such machines. Instead, add patterns to the 'md' file
-+ that include the implied truncation of the shift instructions.
-+ You need not de\fne this macro if it would always have the value of zero. */
-+#define SHIFT_COUNT_TRUNCATED 1
-+
-+/*
-+A C expression which is nonzero if on this machine it is safe to
-+convert an integer of INPREC bits to one of OUTPREC
-+bits (where OUTPREC is smaller than INPREC) by merely
-+operating on it as if it had only OUTPREC bits.
-+
-+On many machines, this expression can be 1.
-+
-+When TRULY_NOOP_TRUNCATION returns 1 for a pair of sizes for
-+modes for which MODES_TIEABLE_P is 0, suboptimal code can result.
-+If this is the case, making TRULY_NOOP_TRUNCATION return 0 in
-+such cases may improve things.
-+*/
-+#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
-+
-+/*
-+An alias for the machine mode for pointers. On most machines, define
-+this to be the integer mode corresponding to the width of a hardware
-+pointer; SImode on 32-bit machine or DImode on 64-bit machines.
-+On some machines you must define this to be one of the partial integer
-+modes, such as PSImode.
-+
-+The width of Pmode must be at least as large as the value of
-+POINTER_SIZE. If it is not equal, you must define the macro
-+POINTERS_EXTEND_UNSIGNED to specify how pointers are extended
-+to Pmode.
-+*/
-+#define Pmode SImode
-+
-+/*
-+An alias for the machine mode used for memory references to functions
-+being called, in call RTL expressions. On most machines this
-+should be QImode.
-+*/
-+#define FUNCTION_MODE SImode
-+
-+
-+#define REG_S_P(x) \
-+ (REG_P (x) || (GET_CODE (x) == SUBREG && REG_P (XEXP (x, 0))))
-+
-+
-+/* If defined, modifies the length assigned to instruction INSN as a
-+ function of the context in which it is used. LENGTH is an lvalue
-+ that contains the initially computed length of the insn and should
-+ be updated with the correct length of the insn. */
-+#define ADJUST_INSN_LENGTH(INSN, LENGTH) \
-+ ((LENGTH) = avr32_adjust_insn_length ((INSN), (LENGTH)))
-+
-+
-+#define CLZ_DEFINED_VALUE_AT_ZERO(mode, value) \
-+ (value = 32, (mode == SImode))
-+
-+#define CTZ_DEFINED_VALUE_AT_ZERO(mode, value) \
-+ (value = 32, (mode == SImode))
-+
-+#define UNITS_PER_SIMD_WORD UNITS_PER_WORD
-+
-+#define STORE_FLAG_VALUE 1
-+
-+enum avr32_builtins
-+{
-+ AVR32_BUILTIN_MTSR,
-+ AVR32_BUILTIN_MFSR,
-+ AVR32_BUILTIN_MTDR,
-+ AVR32_BUILTIN_MFDR,
-+ AVR32_BUILTIN_CACHE,
-+ AVR32_BUILTIN_SYNC,
-+ AVR32_BUILTIN_TLBR,
-+ AVR32_BUILTIN_TLBS,
-+ AVR32_BUILTIN_TLBW,
-+ AVR32_BUILTIN_BREAKPOINT,
-+ AVR32_BUILTIN_XCHG,
-+ AVR32_BUILTIN_LDXI,
-+ AVR32_BUILTIN_BSWAP16,
-+ AVR32_BUILTIN_BSWAP32,
-+ AVR32_BUILTIN_COP,
-+ AVR32_BUILTIN_MVCR_W,
-+ AVR32_BUILTIN_MVRC_W,
-+ AVR32_BUILTIN_MVCR_D,
-+ AVR32_BUILTIN_MVRC_D,
-+ AVR32_BUILTIN_MULSATHH_H,
-+ AVR32_BUILTIN_MULSATHH_W,
-+ AVR32_BUILTIN_MULSATRNDHH_H,
-+ AVR32_BUILTIN_MULSATRNDWH_W,
-+ AVR32_BUILTIN_MULSATWH_W,
-+ AVR32_BUILTIN_MACSATHH_W,
-+ AVR32_BUILTIN_SATADD_H,
-+ AVR32_BUILTIN_SATSUB_H,
-+ AVR32_BUILTIN_SATADD_W,
-+ AVR32_BUILTIN_SATSUB_W,
-+ AVR32_BUILTIN_MULWH_D,
-+ AVR32_BUILTIN_MULNWH_D,
-+ AVR32_BUILTIN_MACWH_D,
-+ AVR32_BUILTIN_MACHH_D,
-+ AVR32_BUILTIN_MUSFR,
-+ AVR32_BUILTIN_MUSTR,
-+ AVR32_BUILTIN_SATS,
-+ AVR32_BUILTIN_SATU,
-+ AVR32_BUILTIN_SATRNDS,
-+ AVR32_BUILTIN_SATRNDU
-+};
-+
-+
-+#define FLOAT_LIB_COMPARE_RETURNS_BOOL(MODE, COMPARISON) \
-+ ((MODE == SFmode) || (MODE == DFmode))
-+
-+#define RENAME_LIBRARY_SET ".set"
-+
-+/* Make ABI_NAME an alias for __GCC_NAME. */
-+#define RENAME_LIBRARY(GCC_NAME, ABI_NAME) \
-+ __asm__ (".globl\t__avr32_" #ABI_NAME "\n" \
-+ ".set\t__avr32_" #ABI_NAME \
-+ ", __" #GCC_NAME "\n");
-+
-+/* Give libgcc functions avr32 ABI name. */
-+#ifdef L_muldi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (muldi3, mul64)
-+#endif
-+#ifdef L_divdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (divdi3, sdiv64)
-+#endif
-+#ifdef L_udivdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (udivdi3, udiv64)
-+#endif
-+#ifdef L_moddi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (moddi3, smod64)
-+#endif
-+#ifdef L_umoddi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (umoddi3, umod64)
-+#endif
-+#ifdef L_ashldi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (ashldi3, lsl64)
-+#endif
-+#ifdef L_lshrdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (lshrdi3, lsr64)
-+#endif
-+#ifdef L_ashrdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (ashrdi3, asr64)
-+#endif
-+
-+#ifdef L_fixsfdi
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (fixsfdi, f32_to_s64)
-+#endif
-+#ifdef L_fixunssfdi
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (fixunssfdi, f32_to_u64)
-+#endif
-+#ifdef L_floatdidf
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (floatdidf, s64_to_f64)
-+#endif
-+#ifdef L_floatdisf
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (floatdisf, s64_to_f32)
-+#endif
-+
-+#endif
-Index: gcc-4.2.3/gcc/config/avr32/avr32.md
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32.md 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1,4606 @@
-+;; AVR32 machine description file.
-+;; Copyright 2003-2006 Atmel Corporation.
-+;;
-+;; Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;; This file is part of GCC.
-+;;
-+;; This program is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2 of the License, or
-+;; (at your option) any later version.
-+;;
-+;; This program is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with this program; if not, write to the Free Software
-+;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+(define_attr "type" "alu,alu2,alu_sat,mulhh,mulwh,mulww_w,mulww_d,div,machh_w,macww_w,macww_d,branch,call,load,load_rm,store,load2,load4,store2,store4,fmul,fcmps,fcmpd,fcast,fmv,fmvcpu,fldd,fstd,flds,fsts,fstm"
-+ (const_string "alu"))
-+
-+
-+(define_attr "cc" "none,set_vncz,set_ncz,set_cz,set_z,bld,compare,cmp_cond_insn,clobber,call_set,fpcompare,from_fpcc"
-+ (const_string "none"))
-+
-+
-+; NB! Keep this in sync with enum architecture_type in avr32.h
-+(define_attr "pipeline" "ap,uc"
-+ (const (symbol_ref "avr32_arch->arch_type")))
-+
-+(define_attr "length" ""
-+ (const_int 4))
-+
-+
-+;; Uses of UNSPEC in this file:
-+(define_constants
-+ [(UNSPEC_PUSHM 0)
-+ (UNSPEC_POPM 1)
-+ (UNSPEC_UDIVMODSI4_INTERNAL 2)
-+ (UNSPEC_DIVMODSI4_INTERNAL 3)
-+ (UNSPEC_STM 4)
-+ (UNSPEC_LDM 5)
-+ (UNSPEC_MOVSICC 6)
-+ (UNSPEC_ADDSICC 7)
-+ (UNSPEC_COND_MI 8)
-+ (UNSPEC_COND_PL 9)
-+ (UNSPEC_PIC_SYM 10)
-+ (UNSPEC_PIC_BASE 11)
-+ (UNSPEC_STORE_MULTIPLE 12)
-+ (UNSPEC_STMFP 13)
-+ (UNSPEC_FPCC_TO_REG 14)
-+ (UNSPEC_REG_TO_CC 15)
-+ (UNSPEC_FORCE_MINIPOOL 16)
-+ (UNSPEC_SATS 17)
-+ (UNSPEC_SATU 18)
-+ (UNSPEC_SATRNDS 19)
-+ (UNSPEC_SATRNDU 20)
-+ ])
-+
-+(define_constants
-+ [(VUNSPEC_EPILOGUE 0)
-+ (VUNSPEC_CACHE 1)
-+ (VUNSPEC_MTSR 2)
-+ (VUNSPEC_MFSR 3)
-+ (VUNSPEC_BLOCKAGE 4)
-+ (VUNSPEC_SYNC 5)
-+ (VUNSPEC_TLBR 6)
-+ (VUNSPEC_TLBW 7)
-+ (VUNSPEC_TLBS 8)
-+ (VUNSPEC_BREAKPOINT 9)
-+ (VUNSPEC_MTDR 10)
-+ (VUNSPEC_MFDR 11)
-+ (VUNSPEC_MVCR 12)
-+ (VUNSPEC_MVRC 13)
-+ (VUNSPEC_COP 14)
-+ (VUNSPEC_ALIGN 15)
-+ (VUNSPEC_POOL_START 16)
-+ (VUNSPEC_POOL_END 17)
-+ (VUNSPEC_POOL_4 18)
-+ (VUNSPEC_POOL_8 19)
-+ (VUNSPEC_POOL_16 20)
-+ (VUNSPEC_MUSFR 21)
-+ (VUNSPEC_MUSTR 22)
-+ (VUNSPEC_SYNC_CMPXCHG 23)
-+ (VUNSPEC_SYNC_SET_LOCK_AND_LOAD 24)
-+ (VUNSPEC_SYNC_STORE_IF_LOCK 25)
-+ (VUNSPEC_EH_RETURN 26)
-+ (VUNSPEC_FRS 27)
-+ ])
-+
-+(define_constants
-+ [
-+ ;; R7 = 15-7 = 8
-+ (FP_REGNUM 8)
-+ ;; Return Register = R12 = 15 - 12 = 3
-+ (RETVAL_REGNUM 3)
-+ ;; SP = R13 = 15 - 13 = 2
-+ (SP_REGNUM 2)
-+ ;; LR = R14 = 15 - 14 = 1
-+ (LR_REGNUM 1)
-+ ;; PC = R15 = 15 - 15 = 0
-+ (PC_REGNUM 0)
-+ ;; FPSR = GENERAL_REGS + 1 = 17
-+ (FPCC_REGNUM 17)
-+ ])
-+
-+
-+
-+
-+;;******************************************************************************
-+;; Macros
-+;;******************************************************************************
-+
-+;; Integer Modes for basic alu insns
-+(define_mode_macro INTM [SI HI QI])
-+(define_mode_attr alu_cc_attr [(SI "set_vncz") (HI "clobber") (QI "clobber")])
-+
-+;; Move word modes
-+(define_mode_macro MOVM [SI V2HI V4QI])
-+
-+;; For mov/addcc insns
-+(define_mode_macro ADDCC [SI HI QI])
-+(define_mode_macro MOVCC [SI HI QI])
-+(define_mode_macro CMP [DI SI HI QI])
-+(define_mode_attr cmp_constraint [(DI "rKu20") (SI "rKs21") (HI "r") (QI "r")])
-+(define_mode_attr cmp_predicate [(DI "register_immediate_operand")
-+ (SI "register_immediate_operand")
-+ (HI "register_operand")
-+ (QI "register_operand")])
-+
-+;; For all conditional insns
-+(define_code_macro any_cond [eq ne gt ge lt le gtu geu ltu leu])
-+(define_code_attr cond [(eq "eq") (ne "ne") (gt "gt") (ge "ge") (lt "lt") (le "le")
-+ (gtu "hi") (geu "hs") (ltu "lo") (leu "ls")])
-+(define_code_attr invcond [(eq "ne") (ne "eq") (gt "le") (ge "lt") (lt "ge") (le "gt")
-+ (gtu "ls") (geu "lo") (ltu "hs") (leu "hi")])
-+
-+;; For logical operations
-+(define_code_macro logical [and ior xor])
-+(define_code_attr logical_insn [(and "and") (ior "or") (xor "eor")])
-+
-+;; Load the predicates
-+(include "predicates.md")
-+
-+
-+;;******************************************************************************
-+;; Automaton pipeline description for avr32
-+;;******************************************************************************
-+
-+(define_automaton "avr32_ap")
-+
-+
-+(define_cpu_unit "is" "avr32_ap")
-+(define_cpu_unit "a1,m1,da" "avr32_ap")
-+(define_cpu_unit "a2,m2,d" "avr32_ap")
-+
-+;;Alu instructions
-+(define_insn_reservation "alu_op" 1
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "alu"))
-+ "is,a1,a2")
-+
-+(define_insn_reservation "alu2_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "alu2"))
-+ "is,is+a1,a1+a2,a2")
-+
-+(define_insn_reservation "alu_sat_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "alu_sat"))
-+ "is,a1,a2")
-+
-+
-+;;Mul instructions
-+(define_insn_reservation "mulhh_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "mulhh,mulwh"))
-+ "is,m1,m2")
-+
-+(define_insn_reservation "mulww_w_op" 3
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "mulww_w"))
-+ "is,m1,m1+m2,m2")
-+
-+(define_insn_reservation "mulww_d_op" 5
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "mulww_d"))
-+ "is,m1,m1+m2,m1+m2,m2,m2")
-+
-+(define_insn_reservation "div_op" 33
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "div"))
-+ "is,m1,m1*31 + m2*31,m2")
-+
-+(define_insn_reservation "machh_w_op" 3
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "machh_w"))
-+ "is*2,m1,m2")
-+
-+
-+(define_insn_reservation "macww_w_op" 4
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "macww_w"))
-+ "is*2,m1,m1,m2")
-+
-+
-+(define_insn_reservation "macww_d_op" 6
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "macww_d"))
-+ "is*2,m1,m1+m2,m1+m2,m2")
-+
-+;;Bypasses for Mac instructions, because of accumulator cache.
-+;;Set latency as low as possible in order to let the compiler let
-+;;mul -> mac and mac -> mac combinations which use the same
-+;;accumulator cache be placed close together to avoid any
-+;;instructions which can ruin the accumulator cache come inbetween.
-+(define_bypass 4 "machh_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 5 "macww_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 7 "macww_d_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+
-+(define_bypass 3 "mulhh_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 4 "mulww_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 6 "mulww_d_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+
-+
-+;;Bypasses for all mul/mac instructions followed by an instruction
-+;;which reads the output AND writes the result to the same register.
-+;;This will generate an Write After Write hazard which gives an
-+;;extra cycle before the result is ready.
-+(define_bypass 0 "machh_w_op" "machh_w_op" "avr32_valid_macmac_bypass")
-+(define_bypass 0 "macww_w_op" "macww_w_op" "avr32_valid_macmac_bypass")
-+(define_bypass 0 "macww_d_op" "macww_d_op" "avr32_valid_macmac_bypass")
-+
-+(define_bypass 0 "mulhh_op" "machh_w_op" "avr32_valid_mulmac_bypass")
-+(define_bypass 0 "mulww_w_op" "macww_w_op" "avr32_valid_mulmac_bypass")
-+(define_bypass 0 "mulww_d_op" "macww_d_op" "avr32_valid_mulmac_bypass")
-+
-+;;Branch and call instructions
-+;;We assume that all branches and rcalls are predicted correctly :-)
-+;;while calls use a lot of cycles.
-+(define_insn_reservation "branch_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "branch"))
-+ "nothing")
-+
-+(define_insn_reservation "call_op" 10
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "call"))
-+ "nothing")
-+
-+
-+;;Load store instructions
-+(define_insn_reservation "load_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "load"))
-+ "is,da,d")
-+
-+(define_insn_reservation "load_rm_op" 3
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "load_rm"))
-+ "is,da,d")
-+
-+
-+(define_insn_reservation "store_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "store"))
-+ "is,da,d")
-+
-+
-+(define_insn_reservation "load_double_op" 3
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "load2"))
-+ "is,da,da+d,d")
-+
-+(define_insn_reservation "load_quad_op" 4
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "load4"))
-+ "is,da,da+d,da+d,d")
-+
-+(define_insn_reservation "store_double_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "store2"))
-+ "is,da,da+d,d")
-+
-+
-+(define_insn_reservation "store_quad_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "store4"))
-+ "is,da,da+d,da+d,d")
-+
-+;;For store the operand to write to memory is read in d and
-+;;the real latency between any instruction and a store is therefore
-+;;one less than for the instructions which reads the operands in the first
-+;;excecution stage
-+(define_bypass 2 "load_double_op" "store_double_op" "avr32_store_bypass")
-+(define_bypass 3 "load_quad_op" "store_quad_op" "avr32_store_bypass")
-+(define_bypass 1 "load_op" "store_op" "avr32_store_bypass")
-+(define_bypass 2 "load_rm_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "alu_sat_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "alu2_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "mulhh_op" "store_op" "avr32_store_bypass")
-+(define_bypass 2 "mulww_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 4 "mulww_d_op" "store_op" "avr32_store_bypass" )
-+(define_bypass 2 "machh_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 3 "macww_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 5 "macww_d_op" "store_op" "avr32_store_bypass")
-+
-+
-+; Bypass for load double operation. If only the first loaded word is needed
-+; then the latency is 2
-+(define_bypass 2 "load_double_op"
-+ "load_op,load_rm_op,alu_sat_op, alu2_op, alu_op, mulhh_op, mulww_w_op,
-+ mulww_d_op, machh_w_op, macww_w_op, macww_d_op"
-+ "avr32_valid_load_double_bypass")
-+
-+; Bypass for load quad operation. If only the first or second loaded word is needed
-+; we set the latency to 2
-+(define_bypass 2 "load_quad_op"
-+ "load_op,load_rm_op,alu_sat_op, alu2_op, alu_op, mulhh_op, mulww_w_op,
-+ mulww_d_op, machh_w_op, macww_w_op, macww_d_op"
-+ "avr32_valid_load_quad_bypass")
-+
-+
-+;;******************************************************************************
-+;; End of Automaton pipeline description for avr32
-+;;******************************************************************************
-+
-+
-+
-+;;=============================================================================
-+;; move
-+;;-----------------------------------------------------------------------------
-+
-+;;== char - 8 bits ============================================================
-+(define_expand "movqi"
-+ [(set (match_operand:QI 0 "nonimmediate_operand" "")
-+ (match_operand:QI 1 "general_operand" ""))]
-+ ""
-+ {
-+ if ( !no_new_pseudos ){
-+ if (GET_CODE (operands[1]) == MEM && optimize){
-+ rtx reg = gen_reg_rtx (SImode);
-+
-+ emit_insn (gen_zero_extendqisi2 (reg, operands[1]));
-+ operands[1] = gen_lowpart (QImode, reg);
-+ }
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) == MEM)
-+ operands[1] = force_reg (QImode, operands[1]);
-+ }
-+
-+ })
-+
-+(define_insn "*movqi_internal"
-+ [(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,m,r")
-+ (match_operand:QI 1 "general_operand" "rKs08,m,r,i"))]
-+ ""
-+ "@
-+ mov\t%0, %1
-+ ld.ub\t%0, %1
-+ st.b\t%0, %1
-+ mov\t%0, %1"
-+ [(set_attr "length" "2,4,4,4")
-+ (set_attr "type" "alu,load_rm,store,alu")])
-+
-+
-+
-+;;== short - 16 bits ==========================================================
-+(define_expand "movhi"
-+ [(set (match_operand:HI 0 "nonimmediate_operand" "")
-+ (match_operand:HI 1 "general_operand" ""))]
-+ ""
-+ {
-+ if ( !no_new_pseudos ){
-+ if (GET_CODE (operands[1]) == MEM && optimize){
-+ rtx reg = gen_reg_rtx (SImode);
-+
-+ emit_insn (gen_extendhisi2 (reg, operands[1]));
-+ operands[1] = gen_lowpart (HImode, reg);
-+ }
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) == MEM)
-+ operands[1] = force_reg (HImode, operands[1]);
-+ }
-+
-+ })
-+
-+(define_insn "*movhi_internal"
-+ [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,m,r")
-+ (match_operand:HI 1 "general_operand" "rKs08,m,r,i"))]
-+ ""
-+ "@
-+ mov\t%0, %1
-+ ld.sh\t%0, %1
-+ st.h\t%0, %1
-+ mov\t%0, %1"
-+ [(set_attr "length" "2,4,4,4")
-+ (set_attr "type" "alu,load_rm,store,alu")])
-+
-+
-+;;== int - 32 bits ============================================================
-+
-+(define_expand "movmisalignsi"
-+ [(set (match_operand:SI 0 "nonimmediate_operand" "")
-+ (match_operand:SI 1 "nonimmediate_operand" ""))]
-+ "TARGET_UNALIGNED_WORD"
-+ {
-+ }
-+)
-+
-+(define_expand "mov<mode>"
-+ [(set (match_operand:MOVM 0 "register_operand" "")
-+ (match_operand:MOVM 1 "general_operand" ""))]
-+ ""
-+ {
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) == MEM)
-+ operands[1] = force_reg (<MODE>mode, operands[1]);
-+
-+
-+ /* Check for out of range immediate constants as these may
-+ occur during reloading, since it seems like reload does
-+ not check if the immediate is legitimate. Don't know if
-+ this is a bug? */
-+ if ( reload_in_progress
-+ && avr32_arch->arch_type != ARCH_TYPE_AVR32_UC
-+ && GET_CODE(operands[1]) == CONST_INT
-+ && !avr32_const_ok_for_constraint_p(INTVAL(operands[1]), 'K', "Ks21") ){
-+ operands[1] = force_const_mem(SImode, operands[1]);
-+ }
-+
-+ if ( (flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS)
-+ && !avr32_legitimate_pic_operand_p(operands[1]) )
-+ operands[1] = legitimize_pic_address (operands[1], <MODE>mode,
-+ (no_new_pseudos ? operands[0] : 0));
-+ else if ( flag_pic && avr32_address_operand(operands[1], GET_MODE(operands[1])) )
-+ /* If we have an address operand then this function uses the pic register. */
-+ current_function_uses_pic_offset_table = 1;
-+ })
-+
-+
-+(define_insn "mov<mode>_internal"
-+ [(set (match_operand:MOVM 0 "nonimmediate_operand" "=r, r, r,r,m,r")
-+ (match_operand:MOVM 1 "general_operand" "rKs08,Ks21,n,m,r,W"))]
-+ ""
-+ {
-+ switch (which_alternative) {
-+ case 0:
-+ case 1: return "mov\t%0, %1";
-+ case 2: return "mov\t%0, lo(%1)\;orh\t%0,hi(%1)";
-+ case 3:
-+ if ( (REG_P(XEXP(operands[1], 0))
-+ && REGNO(XEXP(operands[1], 0)) == SP_REGNUM)
-+ || (GET_CODE(XEXP(operands[1], 0)) == PLUS
-+ && REGNO(XEXP(XEXP(operands[1], 0), 0)) == SP_REGNUM
-+ && GET_CODE(XEXP(XEXP(operands[1], 0), 1)) == CONST_INT
-+ && INTVAL(XEXP(XEXP(operands[1], 0), 1)) % 4 == 0
-+ && INTVAL(XEXP(XEXP(operands[1], 0), 1)) <= 0x1FC) )
-+ return "lddsp\t%0, %1";
-+ else if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])) )
-+ return "lddpc\t%0, %1";
-+ else
-+ return "ld.w\t%0, %1";
-+ case 4:
-+ if ( (REG_P(XEXP(operands[0], 0))
-+ && REGNO(XEXP(operands[0], 0)) == SP_REGNUM)
-+ || (GET_CODE(XEXP(operands[0], 0)) == PLUS
-+ && REGNO(XEXP(XEXP(operands[0], 0), 0)) == SP_REGNUM
-+ && GET_CODE(XEXP(XEXP(operands[0], 0), 1)) == CONST_INT
-+ && INTVAL(XEXP(XEXP(operands[0], 0), 1)) % 4 == 0
-+ && INTVAL(XEXP(XEXP(operands[0], 0), 1)) <= 0x1FC) )
-+ return "stdsp\t%0, %1";
-+ else
-+ return "st.w\t%0, %1";
-+ case 5:
-+ if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+ return "lda.w\t%0, %1";
-+ else
-+ return "ld.w\t%0, r6[%1@got]";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ [(set_attr "length" "2,4,8,4,4,8")
-+ (set_attr "type" "alu,alu,alu2,load,store,load")
-+ (set_attr "cc" "none,none,set_z,none,none,clobber")])
-+
-+
-+;; These instructions are for loading constants which cannot be loaded
-+;; directly from the constant pool because the offset is too large
-+;; high and lo_sum are used even tough for our case it should be
-+;; low and high sum :-)
-+(define_insn "mov_symbol_lo"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (high:SI (match_operand:SI 1 "immediate_operand" "i" )))]
-+ ""
-+ "mov\t%0, lo(%1)"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")]
-+)
-+
-+(define_insn "add_symbol_hi"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (lo_sum:SI (match_dup 0)
-+ (match_operand:SI 1 "immediate_operand" "i" )))]
-+ ""
-+ "orh\t%0, hi(%1)"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")]
-+)
-+
-+
-+
-+;; When generating pic, we need to load the symbol offset into a register.
-+;; So that the optimizer does not confuse this with a normal symbol load
-+;; we use an unspec. The offset will be loaded from a constant pool entry,
-+;; since that is the only type of relocation we can use.
-+(define_insn "pic_load_addr"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec:SI [(match_operand:SI 1 "" "")] UNSPEC_PIC_SYM))]
-+ "flag_pic && CONSTANT_POOL_ADDRESS_P(XEXP(operands[1], 0))"
-+ "lddpc\t%0, %1"
-+ [(set_attr "type" "load")
-+ (set_attr "length" "4")]
-+)
-+
-+(define_insn "pic_compute_got_from_pc"
-+ [(set (match_operand:SI 0 "register_operand" "+r")
-+ (unspec:SI [(minus:SI (pc)
-+ (match_dup 0))] UNSPEC_PIC_BASE))
-+ (use (label_ref (match_operand 1 "" "")))]
-+ "flag_pic"
-+ {
-+ (*targetm.asm_out.internal_label) (asm_out_file, "L",
-+ CODE_LABEL_NUMBER (operands[1]));
-+ return \"rsub\t%0, pc\";
-+ }
-+ [(set_attr "cc" "clobber")
-+ (set_attr "length" "2")]
-+)
-+
-+;;== long long int - 64 bits ==================================================
-+
-+(define_expand "movdi"
-+ [(set (match_operand:DI 0 "nonimmediate_operand" "")
-+ (match_operand:DI 1 "general_operand" ""))]
-+ ""
-+ {
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) != REG)
-+ operands[1] = force_reg (DImode, operands[1]);
-+
-+ })
-+
-+
-+(define_insn_and_split "*movdi_internal"
-+ [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r, r, r,r,r,m")
-+ (match_operand:DI 1 "general_operand" "r, Ks08,Ks21,G,n,m,r"))]
-+ ""
-+ {
-+ switch (which_alternative ){
-+ case 0:
-+ case 1:
-+ case 2:
-+ case 3:
-+ case 4:
-+ return "#";
-+ case 5:
-+ if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])))
-+ return "ld.d\t%0, pc[%1 - .]";
-+ else
-+ return "ld.d\t%0, %1";
-+ case 6:
-+ return "st.d\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+;; Lets split all reg->reg or imm->reg transfers into two SImode transfers
-+ "reload_completed &&
-+ (REG_P (operands[0]) &&
-+ (REG_P (operands[1])
-+ || GET_CODE (operands[1]) == CONST_INT
-+ || GET_CODE (operands[1]) == CONST_DOUBLE))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 2) (match_dup 3))]
-+ {
-+ operands[2] = gen_highpart (SImode, operands[0]);
-+ operands[0] = gen_lowpart (SImode, operands[0]);
-+ if ( REG_P(operands[1]) ){
-+ operands[3] = gen_highpart(SImode, operands[1]);
-+ operands[1] = gen_lowpart(SImode, operands[1]);
-+ } else if ( GET_CODE(operands[1]) == CONST_DOUBLE
-+ || GET_CODE(operands[1]) == CONST_INT ){
-+ rtx split_const[2];
-+ avr32_split_const_expr (DImode, SImode, operands[1], split_const);
-+ operands[3] = split_const[1];
-+ operands[1] = split_const[0];
-+ } else {
-+ internal_error("Illegal operand[1] for movdi split!");
-+ }
-+ }
-+
-+ [(set_attr "length" "*,*,*,*,*,4,4")
-+ (set_attr "type" "*,*,*,*,*,load2,store2")
-+ (set_attr "cc" "*,*,*,*,*,none,none")])
-+
-+
-+;;== 128 bits ==================================================
-+(define_expand "movti"
-+ [(set (match_operand:TI 0 "nonimmediate_operand" "")
-+ (match_operand:TI 1 "nonimmediate_operand" ""))]
-+ ""
-+ {
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) != REG)
-+ operands[1] = force_reg (TImode, operands[1]);
-+
-+ /* We must fix any pre_dec for loads and post_inc stores */
-+ if ( GET_CODE (operands[0]) == MEM
-+ && GET_CODE (XEXP(operands[0],0)) == POST_INC ){
-+ emit_move_insn(gen_rtx_MEM(TImode, XEXP(XEXP(operands[0],0),0)), operands[1]);
-+ emit_insn(gen_addsi3(XEXP(XEXP(operands[0],0),0), XEXP(XEXP(operands[0],0),0), GEN_INT(GET_MODE_SIZE(TImode))));
-+ DONE;
-+ }
-+
-+ if ( GET_CODE (operands[1]) == MEM
-+ && GET_CODE (XEXP(operands[1],0)) == PRE_DEC ){
-+ emit_insn(gen_addsi3(XEXP(XEXP(operands[1],0),0), XEXP(XEXP(operands[1],0),0), GEN_INT(-GET_MODE_SIZE(TImode))));
-+ emit_move_insn(operands[0], gen_rtx_MEM(TImode, XEXP(XEXP(operands[1],0),0)));
-+ DONE;
-+ }
-+ })
-+
-+
-+(define_insn_and_split "*movti_internal"
-+ [(set (match_operand:TI 0 "avr32_movti_dst_operand" "=r,r,<RKu00,r,r")
-+ (match_operand:TI 1 "avr32_movti_src_operand" " r,RKu00>,r,n,m"))]
-+ ""
-+ {
-+ switch (which_alternative ){
-+ case 0:
-+ case 3:
-+ return "#";
-+ case 1:
-+ return "ldm\t%p1, %0";
-+ case 2:
-+ return "stm\t%p0, %1";
-+ case 4:
-+ return "ld.d\t%U0, pc[%1 - .]\;ld.d\t%B0, pc[%1 - . + 8]";
-+ }
-+ }
-+
-+ "reload_completed &&
-+ (REG_P (operands[0]) &&
-+ (REG_P (operands[1])
-+ || (GET_CODE (operands[1]) == MEM
-+ && GET_CODE (XEXP (operands[1], 0)) == SYMBOL_REF
-+ && CONSTANT_POOL_ADDRESS_P (XEXP (operands[1], 0)))
-+ || GET_CODE (operands[1]) == CONST_INT
-+ || GET_CODE (operands[1]) == CONST_DOUBLE))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 2) (match_dup 3))]
-+ {
-+ operands[2] = simplify_gen_subreg ( DImode, operands[0],
-+ TImode, 0 );
-+ operands[0] = simplify_gen_subreg ( DImode, operands[0],
-+ TImode, 8 );
-+ if ( REG_P(operands[1]) ){
-+ operands[3] = simplify_gen_subreg ( DImode, operands[1],
-+ TImode, 0 );
-+ operands[1] = simplify_gen_subreg ( DImode, operands[1],
-+ TImode, 8 );
-+ } else if ( GET_CODE(operands[1]) == CONST_DOUBLE
-+ || GET_CODE(operands[1]) == CONST_INT ){
-+ rtx split_const[2];
-+ avr32_split_const_expr (TImode, DImode, operands[1], split_const);
-+ operands[3] = split_const[1];
-+ operands[1] = split_const[0];
-+ } else if (avr32_const_pool_ref_operand (operands[1], GET_MODE(operands[1]))){
-+ rtx split_const[2];
-+ rtx cop = avoid_constant_pool_reference (operands[1]);
-+ if (operands[1] == cop)
-+ cop = get_pool_constant (XEXP (operands[1], 0));
-+ avr32_split_const_expr (TImode, DImode, cop, split_const);
-+ operands[3] = force_const_mem (DImode, split_const[1]);
-+ operands[1] = force_const_mem (DImode, split_const[0]);
-+ } else {
-+ internal_error("Illegal operand[1] for movdi split!");
-+ }
-+ }
-+ [(set_attr "length" "*,4,4,*,8")
-+ (set_attr "type" "*,load4,store4,*,load4")])
-+
-+
-+;;== float - 32 bits ==========================================================
-+(define_expand "movsf"
-+ [(set (match_operand:SF 0 "nonimmediate_operand" "")
-+ (match_operand:SF 1 "general_operand" ""))]
-+ ""
-+ {
-+
-+
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) != REG)
-+ operands[1] = force_reg (SFmode, operands[1]);
-+
-+ })
-+
-+(define_insn "*movsf_internal"
-+ [(set (match_operand:SF 0 "nonimmediate_operand" "=r,r,r,r,m")
-+ (match_operand:SF 1 "general_operand" "r, G,F,m,r"))]
-+ "TARGET_SOFT_FLOAT"
-+ {
-+ switch (which_alternative) {
-+ case 0:
-+ case 1: return "mov\t%0, %1";
-+ case 2: return "mov\t%0, lo(%1)\;orh\t%0, hi(%1)";
-+ case 3:
-+ if ( (REG_P(XEXP(operands[1], 0))
-+ && REGNO(XEXP(operands[1], 0)) == SP_REGNUM)
-+ || (GET_CODE(XEXP(operands[1], 0)) == PLUS
-+ && REGNO(XEXP(XEXP(operands[1], 0), 0)) == SP_REGNUM
-+ && GET_CODE(XEXP(XEXP(operands[1], 0), 1)) == CONST_INT
-+ && INTVAL(XEXP(XEXP(operands[1], 0), 1)) % 4 == 0
-+ && INTVAL(XEXP(XEXP(operands[1], 0), 1)) <= 0x1FC) )
-+ return "lddsp\t%0, %1";
-+ else if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])) )
-+ return "lddpc\t%0, %1";
-+ else
-+ return "ld.w\t%0, %1";
-+ case 4:
-+ if ( (REG_P(XEXP(operands[0], 0))
-+ && REGNO(XEXP(operands[0], 0)) == SP_REGNUM)
-+ || (GET_CODE(XEXP(operands[0], 0)) == PLUS
-+ && REGNO(XEXP(XEXP(operands[0], 0), 0)) == SP_REGNUM
-+ && GET_CODE(XEXP(XEXP(operands[0], 0), 1)) == CONST_INT
-+ && INTVAL(XEXP(XEXP(operands[0], 0), 1)) % 4 == 0
-+ && INTVAL(XEXP(XEXP(operands[0], 0), 1)) <= 0x1FC) )
-+ return "stdsp\t%0, %1";
-+ else
-+ return "st.w\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ [(set_attr "length" "2,4,8,4,4")
-+ (set_attr "type" "alu,alu,alu2,load,store")
-+ (set_attr "cc" "none,none,clobber,none,none")])
-+
-+
-+
-+;;== double - 64 bits =========================================================
-+(define_expand "movdf"
-+ [(set (match_operand:DF 0 "nonimmediate_operand" "")
-+ (match_operand:DF 1 "general_operand" ""))]
-+ ""
-+ {
-+ /* One of the ops has to be in a register. */
-+ if (GET_CODE (operands[0]) != REG){
-+ operands[1] = force_reg (DFmode, operands[1]);
-+ }
-+ })
-+
-+
-+(define_insn_and_split "*movdf_internal"
-+ [(set (match_operand:DF 0 "nonimmediate_operand" "=r,r,r,r,m")
-+ (match_operand:DF 1 "general_operand" " r,G,F,m,r"))]
-+ "TARGET_SOFT_FLOAT"
-+ {
-+ switch (which_alternative ){
-+ case 0:
-+ case 1:
-+ case 2:
-+ return "#";
-+ case 3:
-+ if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])))
-+ return "ld.d\t%0, pc[%1 - .]";
-+ else
-+ return "ld.d\t%0, %1";
-+ case 4:
-+ return "st.d\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ "TARGET_SOFT_FLOAT
-+ && reload_completed
-+ && (REG_P (operands[0])
-+ && (REG_P (operands[1])
-+ || GET_CODE (operands[1]) == CONST_DOUBLE))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 2) (match_dup 3))]
-+ "
-+ {
-+ operands[2] = gen_highpart (SImode, operands[0]);
-+ operands[0] = gen_lowpart (SImode, operands[0]);
-+ operands[3] = gen_highpart(SImode, operands[1]);
-+ operands[1] = gen_lowpart(SImode, operands[1]);
-+ }
-+ "
-+
-+ [(set_attr "length" "*,*,*,4,4")
-+ (set_attr "type" "*,*,*,load2,store2")
-+ (set_attr "cc" "*,*,*,none,none")])
-+
-+
-+
-+
-+;;=============================================================================
-+;; Move chunks of memory
-+;;=============================================================================
-+
-+(define_expand "movmemsi"
-+ [(match_operand:BLK 0 "general_operand" "")
-+ (match_operand:BLK 1 "general_operand" "")
-+ (match_operand:SI 2 "const_int_operand" "")
-+ (match_operand:SI 3 "const_int_operand" "")]
-+ ""
-+ "
-+ if (avr32_gen_movmemsi (operands))
-+ DONE;
-+ FAIL;
-+ "
-+
-+ )
-+
-+
-+
-+;;=============================================================================
-+;; Bit field instructions
-+;;-----------------------------------------------------------------------------
-+;; Instructions to insert or extract bit-fields
-+;;=============================================================================
-+
-+(define_insn "insv"
-+ [ (set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
-+ (match_operand:SI 1 "immediate_operand" "Ku05")
-+ (match_operand:SI 2 "immediate_operand" "Ku05"))
-+ (match_operand 3 "register_operand" "r"))]
-+ ""
-+ "bfins\t%0, %3, %2, %1"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "set_ncz")])
-+
-+
-+
-+(define_expand "extv"
-+ [ (set (match_operand:SI 0 "register_operand" "")
-+ (sign_extract:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")
-+ (match_operand:SI 3 "immediate_operand" "")))]
-+ ""
-+ {
-+ if ( INTVAL(operands[2]) >= 32 )
-+ FAIL;
-+ }
-+)
-+
-+(define_expand "extzv"
-+ [ (set (match_operand:SI 0 "register_operand" "")
-+ (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")
-+ (match_operand:SI 3 "immediate_operand" "")))]
-+ ""
-+ {
-+ if ( INTVAL(operands[2]) >= 32 )
-+ FAIL;
-+ }
-+)
-+
-+(define_insn "extv_internal"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (sign_extract:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku05")
-+ (match_operand:SI 3 "immediate_operand" "Ku05")))]
-+ "INTVAL(operands[2]) < 32"
-+ "bfexts\t%0, %1, %3, %2"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "set_ncz")])
-+
-+
-+(define_insn "extzv_internal"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (zero_extract:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku05")
-+ (match_operand:SI 3 "immediate_operand" "Ku05")))]
-+ "INTVAL(operands[2]) < 32"
-+ "bfextu\t%0, %1, %3, %2"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "set_ncz")])
-+
-+
-+
-+;;=============================================================================
-+;; Some peepholes for avoiding unnecessary cast instructions
-+;; followed by bfins.
-+;;-----------------------------------------------------------------------------
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (zero_extend:SI (match_operand:QI 1 "register_operand" "")))
-+ (set (zero_extract:SI (match_operand 2 "register_operand" "")
-+ (match_operand:SI 3 "immediate_operand" "")
-+ (match_operand:SI 4 "immediate_operand" ""))
-+ (match_dup 0))]
-+ "((peep2_reg_dead_p(2, operands[0]) &&
-+ (INTVAL(operands[3]) <= 8)))"
-+ [(set (zero_extract:SI (match_dup 2)
-+ (match_dup 3)
-+ (match_dup 4))
-+ (match_dup 1))]
-+ )
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (zero_extend:SI (match_operand:HI 1 "register_operand" "")))
-+ (set (zero_extract:SI (match_operand 2 "register_operand" "")
-+ (match_operand:SI 3 "immediate_operand" "")
-+ (match_operand:SI 4 "immediate_operand" ""))
-+ (match_dup 0))]
-+ "((peep2_reg_dead_p(2, operands[0]) &&
-+ (INTVAL(operands[3]) <= 16)))"
-+ [(set (zero_extract:SI (match_dup 2)
-+ (match_dup 3)
-+ (match_dup 4))
-+ (match_dup 1))]
-+ )
-+
-+;;=============================================================================
-+;; push bytes
-+;;-----------------------------------------------------------------------------
-+;; Implements the push instruction
-+;;=============================================================================
-+(define_insn "pushm"
-+ [(set (mem:BLK (pre_dec:BLK (reg:SI SP_REGNUM)))
-+ (unspec:BLK [(match_operand 0 "const_int_operand" "")]
-+ UNSPEC_PUSHM))]
-+ ""
-+ {
-+ if (INTVAL(operands[0])) {
-+ return "pushm\t%r0";
-+ } else {
-+ return "";
-+ }
-+ }
-+ [(set_attr "type" "store")
-+ (set_attr "length" "2")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "stm"
-+ [(unspec [(match_operand 0 "register_operand" "r")
-+ (match_operand 1 "const_int_operand" "")
-+ (match_operand 2 "const_int_operand" "")]
-+ UNSPEC_STM)]
-+ ""
-+ {
-+ if (INTVAL(operands[1])) {
-+ if (INTVAL(operands[2]) != 0)
-+ return "stm\t--%0, %s1";
-+ else
-+ return "stm\t%0, %s1";
-+ } else {
-+ return "";
-+ }
-+ }
-+ [(set_attr "type" "store")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+
-+
-+(define_insn "popm"
-+ [(unspec [(match_operand 0 "const_int_operand" "")]
-+ UNSPEC_POPM)]
-+ ""
-+ {
-+ if (INTVAL(operands[0])) {
-+ return "popm %r0";
-+ } else {
-+ return "";
-+ }
-+ }
-+ [(set_attr "type" "load")
-+ (set_attr "length" "2")])
-+
-+
-+
-+;;=============================================================================
-+;; add
-+;;-----------------------------------------------------------------------------
-+;; Adds reg1 with reg2 and puts the result in reg0.
-+;;=============================================================================
-+(define_insn "add<mode>3"
-+ [(set (match_operand:INTM 0 "register_operand" "=r,r,r,r,r")
-+ (plus:INTM (match_operand:INTM 1 "register_operand" "%0,r,0,r,0")
-+ (match_operand:INTM 2 "avr32_add_operand" "r,r,Is08,Is16,Is21")))]
-+ ""
-+ "@
-+ add %0, %2
-+ add %0, %1, %2
-+ sub %0, %n2
-+ sub %0, %1, %n2
-+ sub %0, %n2"
-+
-+ [(set_attr "length" "2,4,2,4,4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "add<mode>3_lsl"
-+ [(set (match_operand:INTM 0 "register_operand" "=r")
-+ (plus:INTM (ashift:INTM (match_operand:INTM 1 "register_operand" "r")
-+ (match_operand:INTM 3 "avr32_add_shift_immediate_operand" "Ku02"))
-+ (match_operand:INTM 2 "register_operand" "r")))]
-+ ""
-+ "add %0, %2, %1 << %3"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "add<mode>3_lsl2"
-+ [(set (match_operand:INTM 0 "register_operand" "=r")
-+ (plus:INTM (match_operand:INTM 1 "register_operand" "r")
-+ (ashift:INTM (match_operand:INTM 2 "register_operand" "r")
-+ (match_operand:INTM 3 "avr32_add_shift_immediate_operand" "Ku02"))))]
-+ ""
-+ "add %0, %1, %2 << %3"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+
-+
-+(define_insn "add<mode>3_mul"
-+ [(set (match_operand:INTM 0 "register_operand" "=r")
-+ (plus:INTM (mult:INTM (match_operand:INTM 1 "register_operand" "r")
-+ (match_operand:INTM 3 "immediate_operand" "Ku04" ))
-+ (match_operand:INTM 2 "register_operand" "r")))]
-+ "(INTVAL(operands[3]) == 0) || (INTVAL(operands[3]) == 2) ||
-+ (INTVAL(operands[3]) == 4) || (INTVAL(operands[3]) == 8)"
-+ "add %0, %2, %1 << %p3"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "add<mode>3_mul2"
-+ [(set (match_operand:INTM 0 "register_operand" "=r")
-+ (plus:INTM (match_operand:INTM 1 "register_operand" "r")
-+ (mult:INTM (match_operand:INTM 2 "register_operand" "r")
-+ (match_operand:INTM 3 "immediate_operand" "Ku04" ))))]
-+ "(INTVAL(operands[3]) == 0) || (INTVAL(operands[3]) == 2) ||
-+ (INTVAL(operands[3]) == 4) || (INTVAL(operands[3]) == 8)"
-+ "add %0, %1, %2 << %p3"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (ashift:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (plus:SI (match_dup 0)
-+ (match_operand:SI 4 "register_operand" "")))]
-+ "(peep2_reg_dead_p(2, operands[0]) &&
-+ (INTVAL(operands[2]) < 4 && INTVAL(operands[2]) > 0))"
-+ [(set (match_dup 3)
-+ (plus:SI (ashift:SI (match_dup 1)
-+ (match_dup 2))
-+ (match_dup 4)))]
-+ )
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (ashift:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (plus:SI (match_operand:SI 4 "register_operand" "")
-+ (match_dup 0)))]
-+ "(peep2_reg_dead_p(2, operands[0]) &&
-+ (INTVAL(operands[2]) < 4 && INTVAL(operands[2]) > 0))"
-+ [(set (match_dup 3)
-+ (plus:SI (ashift:SI (match_dup 1)
-+ (match_dup 2))
-+ (match_dup 4)))]
-+ )
-+
-+(define_insn "adddi3"
-+ [(set (match_operand:DI 0 "register_operand" "=r,r")
-+ (plus:DI (match_operand:DI 1 "register_operand" "%r,0")
-+ (match_operand:DI 2 "register_operand" "r,r")))]
-+ ""
-+ "@
-+ add %0, %1, %2\;adc %m0, %m1, %m2
-+ add %0, %2\;adc %m0, %m0, %m2"
-+ [(set_attr "length" "8,6")
-+ (set_attr "type" "alu2")
-+ (set_attr "cc" "set_vncz")])
-+
-+
-+
-+;;=============================================================================
-+;; subtract
-+;;-----------------------------------------------------------------------------
-+;; Subtract reg2 or immediate value from reg0 and puts the result in reg0.
-+;;=============================================================================
-+
-+(define_insn "sub<mode>3"
-+ [(set (match_operand:INTM 0 "general_operand" "=r,r,r,r,r,r,r")
-+ (minus:INTM (match_operand:INTM 1 "nonmemory_operand" "0,r,0,r,0,r,Ks08")
-+ (match_operand:INTM 2 "nonmemory_operand" "r,r,Ks08,Ks16,Ks21,0,r")))]
-+ ""
-+ "@
-+ sub %0, %2
-+ sub %0, %1, %2
-+ sub %0, %2
-+ sub %0, %1, %2
-+ sub %0, %2
-+ rsub %0, %1
-+ rsub %0, %2, %1"
-+ [(set_attr "length" "2,4,2,4,4,2,4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "*sub<mode>3_mul"
-+ [(set (match_operand:INTM 0 "register_operand" "=r,r,r")
-+ (minus:INTM (match_operand:INTM 1 "register_operand" "r,0,r")
-+ (mult:INTM (match_operand:INTM 2 "register_operand" "r,r,0")
-+ (match_operand:SI 3 "immediate_operand" "Ku04,Ku04,Ku04" ))))]
-+ "(INTVAL(operands[3]) == 0) || (INTVAL(operands[3]) == 2) ||
-+ (INTVAL(operands[3]) == 4) || (INTVAL(operands[3]) == 8)"
-+ "@
-+ sub %0, %1, %2 << %p3
-+ sub %0, %0, %2 << %p3
-+ sub %0, %1, %0 << %p3"
-+ [(set_attr "length" "4,4,4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "*sub<mode>3_lsl"
-+ [(set (match_operand:INTM 0 "register_operand" "=r")
-+ (minus:INTM (match_operand:INTM 1 "register_operand" "r")
-+ (ashift:INTM (match_operand:INTM 2 "register_operand" "r")
-+ (match_operand:SI 3 "avr32_add_shift_immediate_operand" "Ku02"))))]
-+ ""
-+ "sub %0, %1, %2 << %3"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+
-+(define_insn "subdi3"
-+ [(set (match_operand:DI 0 "register_operand" "=r,r")
-+ (minus:DI (match_operand:DI 1 "register_operand" "%r,0")
-+ (match_operand:DI 2 "register_operand" "r,r")))]
-+ ""
-+ "@
-+ sub %0, %1, %2\;sbc %m0, %m1, %m2
-+ sub %0, %2\;sbc %m0, %m0, %m2"
-+ [(set_attr "length" "8,6")
-+ (set_attr "type" "alu2")
-+ (set_attr "cc" "set_vncz")])
-+
-+
-+
-+;;=============================================================================
-+;; multiply
-+;;-----------------------------------------------------------------------------
-+;; Multiply op1 and op2 and put the value in op0.
-+;;=============================================================================
-+
-+
-+(define_insn "mulqi3"
-+ [(set (match_operand:QI 0 "register_operand" "=r,r,r")
-+ (mult:QI (match_operand:QI 1 "register_operand" "%0,r,r")
-+ (match_operand:QI 2 "avr32_mul_operand" "r,r,Ks08")))]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "mul %0, %2";
-+ case 1:
-+ return "mul %0, %1, %2";
-+ case 2:
-+ return "mul %0, %1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "type" "mulww_w,mulww_w,mulwh")
-+ (set_attr "length" "2,4,4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "mulsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (mult:SI (match_operand:SI 1 "register_operand" "%0,r,r")
-+ (match_operand:SI 2 "avr32_mul_operand" "r,r,Ks08")))]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "mul %0, %2";
-+ case 1:
-+ return "mul %0, %1, %2";
-+ case 2:
-+ return "mul %0, %1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "type" "mulww_w,mulww_w,mulwh")
-+ (set_attr "length" "2,4,4")
-+ (set_attr "cc" "none")])
-+
-+
-+(define_insn "mulhisi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (mult:SI
-+ (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
-+ "TARGET_DSP"
-+ "mulhh.w %0, %1:b, %2:b"
-+ [(set_attr "type" "mulhh")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_peephole2
-+ [(match_scratch:DI 6 "r")
-+ (set (match_operand:SI 0 "register_operand" "")
-+ (mult:SI
-+ (sign_extend:SI (match_operand:HI 1 "register_operand" ""))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" ""))))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (ashiftrt:SI (match_dup 0)
-+ (const_int 16)))]
-+ "TARGET_DSP
-+ && (peep2_reg_dead_p(1, operands[0]) || (REGNO(operands[0]) == REGNO(operands[3])))"
-+ [(set (match_dup 4) (sign_extend:SI (match_dup 1)))
-+ (set (match_dup 6)
-+ (ashift:DI (mult:DI (sign_extend:DI (match_dup 4))
-+ (sign_extend:DI (match_dup 2)))
-+ (const_int 16)))
-+ (set (match_dup 3) (match_dup 5))]
-+
-+ "{
-+ operands[4] = gen_rtx_REG(SImode, REGNO(operands[1]));
-+ operands[5] = gen_highpart (SImode, operands[4]);
-+ }"
-+ )
-+
-+(define_insn "mulnhisi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (mult:SI
-+ (sign_extend:SI (neg:HI (match_operand:HI 1 "register_operand" "r")))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
-+ "TARGET_DSP"
-+ "mulnhh.w %0, %1:b, %2:b"
-+ [(set_attr "type" "mulhh")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "machisi3"
-+ [(set (match_operand:SI 0 "register_operand" "+r")
-+ (plus:SI (mult:SI
-+ (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+ (match_dup 0)))]
-+ "TARGET_DSP"
-+ "machh.w %0, %1:b, %2:b"
-+ [(set_attr "type" "machh_w")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+
-+
-+(define_insn "mulsidi3"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (mult:DI
-+ (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:SI 2 "register_operand" "r"))))]
-+ ""
-+ "muls.d %0, %1, %2"
-+ [(set_attr "type" "mulww_d")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "umulsidi3"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (mult:DI
-+ (zero_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+ (zero_extend:DI (match_operand:SI 2 "register_operand" "r"))))]
-+ ""
-+ "mulu.d %0, %1, %2"
-+ [(set_attr "type" "mulww_d")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "*mulaccsi3"
-+ [(set (match_operand:SI 0 "register_operand" "+r")
-+ (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "%r")
-+ (match_operand:SI 2 "register_operand" "r"))
-+ (match_dup 0)))]
-+ ""
-+ "mac %0, %1, %2"
-+ [(set_attr "type" "macww_w")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "mulaccsidi3"
-+ [(set (match_operand:DI 0 "register_operand" "+r")
-+ (plus:DI (mult:DI
-+ (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:SI 2 "register_operand" "r")))
-+ (match_dup 0)))]
-+ ""
-+ "macs.d %0, %1, %2"
-+ [(set_attr "type" "macww_d")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "umulaccsidi3"
-+ [(set (match_operand:DI 0 "register_operand" "+r")
-+ (plus:DI (mult:DI
-+ (zero_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+ (zero_extend:DI (match_operand:SI 2 "register_operand" "r")))
-+ (match_dup 0)))]
-+ ""
-+ "macu.d %0, %1, %2"
-+ [(set_attr "type" "macww_d")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+
-+
-+;; Try to avoid Write-After-Write hazards for mul operations
-+;; if it can be done
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (mult:SI
-+ (sign_extend:SI (match_operand 1 "general_operand" ""))
-+ (sign_extend:SI (match_operand 2 "general_operand" ""))))
-+ (set (match_dup 0)
-+ (match_operator:SI 3 "alu_operator" [(match_dup 0)
-+ (match_operand 4 "general_operand" "")]))]
-+ "peep2_reg_dead_p(1, operands[2])"
-+ [(set (match_dup 5)
-+ (mult:SI
-+ (sign_extend:SI (match_dup 1))
-+ (sign_extend:SI (match_dup 2))))
-+ (set (match_dup 0)
-+ (match_op_dup 3 [(match_dup 5)
-+ (match_dup 4)]))]
-+ "{operands[5] = gen_rtx_REG(SImode, REGNO(operands[2]));}"
-+ )
-+
-+
-+
-+;;=============================================================================
-+;; DSP instructions
-+;;=============================================================================
-+(define_insn "mulsathh_h"
-+ [(set (match_operand:HI 0 "register_operand" "=r")
-+ (ss_truncate:HI (ashiftrt:SI (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 15))))]
-+ "TARGET_DSP"
-+ "mulsathh.h\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsatrndhh_h"
-+ [(set (match_operand:HI 0 "register_operand" "=r")
-+ (ss_truncate:HI (ashiftrt:SI
-+ (plus:SI (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 1073741824))
-+ (const_int 15))))]
-+ "TARGET_DSP"
-+ "mulsatrndhh.h\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsathh_w"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ss_truncate:SI (ashift:DI (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 1))))]
-+ "TARGET_DSP"
-+ "mulsathh.w\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsatwh_w"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ss_truncate:SI (ashiftrt:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 15))))]
-+ "TARGET_DSP"
-+ "mulsatwh.w\t%0, %1, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+(define_insn "mulsatrndwh_w"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ss_truncate:SI (ashiftrt:DI (plus:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 1073741824))
-+ (const_int 15))))]
-+ "TARGET_DSP"
-+ "mulsatrndwh.w\t%0, %1, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+(define_insn "macsathh_w"
-+ [(set (match_operand:SI 0 "register_operand" "+r")
-+ (plus:SI (match_dup 0)
-+ (ss_truncate:SI (ashift:DI (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 1)))))]
-+ "TARGET_DSP"
-+ "macsathh.w\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulhh")])
-+
-+
-+(define_insn "mulwh_d"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (ashift:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 16)))]
-+ "TARGET_DSP"
-+ "mulwh.d\t%0, %1, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+
-+(define_insn "mulnwh_d"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (ashift:DI (mult:DI (not:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r")))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 16)))]
-+ "TARGET_DSP"
-+ "mulnwh.d\t%0, %1, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+(define_insn "macwh_d"
-+ [(set (match_operand:DI 0 "register_operand" "+r")
-+ (plus:DI (match_dup 0)
-+ (ashift:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+ (const_int 16))))]
-+ "TARGET_DSP"
-+ "macwh.d\t%0, %1, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+(define_insn "machh_d"
-+ [(set (match_operand:DI 0 "register_operand" "+r")
-+ (plus:DI (match_dup 0)
-+ (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+ (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))))]
-+ "TARGET_DSP"
-+ "machh.d\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "mulwh")])
-+
-+(define_insn "satadd_w"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ss_plus:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))]
-+ "TARGET_DSP"
-+ "satadd.w\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "alu_sat")])
-+
-+(define_insn "satsub_w"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ss_minus:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))]
-+ "TARGET_DSP"
-+ "satsub.w\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "alu_sat")])
-+
-+(define_insn "satadd_h"
-+ [(set (match_operand:HI 0 "register_operand" "=r")
-+ (ss_plus:HI (match_operand:HI 1 "register_operand" "r")
-+ (match_operand:HI 2 "register_operand" "r")))]
-+ "TARGET_DSP"
-+ "satadd.h\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "alu_sat")])
-+
-+(define_insn "satsub_h"
-+ [(set (match_operand:HI 0 "register_operand" "=r")
-+ (ss_minus:HI (match_operand:HI 1 "register_operand" "r")
-+ (match_operand:HI 2 "register_operand" "r")))]
-+ "TARGET_DSP"
-+ "satsub.h\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "alu_sat")])
-+
-+
-+;;=============================================================================
-+;; smin
-+;;-----------------------------------------------------------------------------
-+;; Set reg0 to the smallest value of reg1 and reg2. It is used for signed
-+;; values in the registers.
-+;;=============================================================================
-+(define_insn "sminsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (smin:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))]
-+ ""
-+ "min %0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; smax
-+;;-----------------------------------------------------------------------------
-+;; Set reg0 to the largest value of reg1 and reg2. It is used for signed
-+;; values in the registers.
-+;;=============================================================================
-+(define_insn "smaxsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (smax:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))]
-+ ""
-+ "max %0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; Logical operations
-+;;-----------------------------------------------------------------------------
-+
-+;; Split up simple DImode logical operations. Simply perform the logical
-+;; operation on the upper and lower halves of the registers.
-+(define_split
-+ [(set (match_operand:DI 0 "register_operand" "")
-+ (match_operator:DI 6 "logical_binary_operator"
-+ [(match_operand:DI 1 "register_operand" "")
-+ (match_operand:DI 2 "register_operand" "")]))]
-+ "reload_completed"
-+ [(set (match_dup 0) (match_op_dup:SI 6 [(match_dup 1) (match_dup 2)]))
-+ (set (match_dup 3) (match_op_dup:SI 6 [(match_dup 4) (match_dup 5)]))]
-+ "
-+ {
-+ operands[3] = gen_highpart (SImode, operands[0]);
-+ operands[0] = gen_lowpart (SImode, operands[0]);
-+ operands[4] = gen_highpart (SImode, operands[1]);
-+ operands[1] = gen_lowpart (SImode, operands[1]);
-+ operands[5] = gen_highpart (SImode, operands[2]);
-+ operands[2] = gen_lowpart (SImode, operands[2]);
-+ }"
-+)
-+
-+;;=============================================================================
-+;; Logical operations with shifted operand
-+;;=============================================================================
-+(define_insn "<code>si_lshift"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (logical:SI (match_operator:SI 4 "logical_shift_operator"
-+ [(match_operand:SI 2 "register_operand" "r")
-+ (match_operand:SI 3 "immediate_operand" "Ku05")])
-+ (match_operand:SI 1 "register_operand" "r")))]
-+ ""
-+ {
-+ if ( GET_CODE(operands[4]) == ASHIFT )
-+ return "<logical_insn>\t%0, %1, %2 << %3";
-+ else
-+ return "<logical_insn>\t%0, %1, %2 >> %3";
-+ }
-+
-+ [(set_attr "cc" "set_z")]
-+)
-+
-+
-+;;************************************************
-+;; Peepholes for detecting logical operantions
-+;; with shifted operands
-+;;************************************************
-+
-+(define_peephole
-+ [(set (match_operand:SI 3 "register_operand" "")
-+ (match_operator:SI 5 "logical_shift_operator"
-+ [(match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")]))
-+ (set (match_operand:SI 0 "register_operand" "")
-+ (logical:SI (match_operand:SI 4 "register_operand" "")
-+ (match_dup 3)))]
-+ "(dead_or_set_p(insn, operands[3])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+ {
-+ if ( GET_CODE(operands[5]) == ASHIFT )
-+ return "<logical_insn>\t%0, %4, %1 << %2";
-+ else
-+ return "<logical_insn>\t%0, %4, %1 >> %2";
-+ }
-+ [(set_attr "cc" "set_z")]
-+ )
-+
-+(define_peephole
-+ [(set (match_operand:SI 3 "register_operand" "")
-+ (match_operator:SI 5 "logical_shift_operator"
-+ [(match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")]))
-+ (set (match_operand:SI 0 "register_operand" "")
-+ (logical:SI (match_dup 3)
-+ (match_operand:SI 4 "register_operand" "")))]
-+ "(dead_or_set_p(insn, operands[3])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+ {
-+ if ( GET_CODE(operands[5]) == ASHIFT )
-+ return "<logical_insn>\t%0, %4, %1 << %2";
-+ else
-+ return "<logical_insn>\t%0, %4, %1 >> %2";
-+ }
-+ [(set_attr "cc" "set_z")]
-+ )
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (match_operator:SI 5 "logical_shift_operator"
-+ [(match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")]))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (logical:SI (match_operand:SI 4 "register_operand" "")
-+ (match_dup 0)))]
-+ "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+
-+ [(set (match_dup 3)
-+ (logical:SI (match_op_dup:SI 5 [(match_dup 1) (match_dup 2)])
-+ (match_dup 4)))]
-+
-+ ""
-+)
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (match_operator:SI 5 "logical_shift_operator"
-+ [(match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")]))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (logical:SI (match_dup 0)
-+ (match_operand:SI 4 "register_operand" "")))]
-+ "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+
-+ [(set (match_dup 3)
-+ (logical:SI (match_op_dup:SI 5 [(match_dup 1) (match_dup 2)])
-+ (match_dup 4)))]
-+
-+ ""
-+)
-+
-+
-+;;=============================================================================
-+;; and
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise logical-and between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "andnsi"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (and:SI (match_operand:SI 1 "register_operand" "0")
-+ (not:SI (match_operand:SI 2 "register_operand" "r"))))]
-+ ""
-+ "andn %0, %2"
-+ [(set_attr "cc" "set_z")
-+ (set_attr "length" "2")]
-+)
-+
-+
-+
-+
-+(define_insn "andsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r, r, r, r")
-+ (and:SI (match_operand:SI 1 "register_operand" "%0, r, 0, r")
-+ (match_operand:SI 2 "nonmemory_operand" "r, M, i, r")))]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "and\t%0, %2";
-+ case 1:
-+ {
-+ int i, first_set = -1;
-+ /* Search for first bit set in mask */
-+ for ( i = 31; i >= 0; --i )
-+ if ( INTVAL(operands[2]) & (1 << i) ){
-+ first_set = i;
-+ break;
-+ }
-+ operands[2] = gen_rtx_CONST_INT(SImode, first_set + 1);
-+ return "bfextu\t%0, %1, 0, %2";
-+ }
-+ case 2:
-+ if ( one_bit_cleared_operand(operands[2], VOIDmode) ){
-+ int bitpos;
-+ for ( bitpos = 0; bitpos < 32; bitpos++ )
-+ if ( !(INTVAL(operands[2]) & (1 << bitpos)) )
-+ break;
-+ operands[2] = gen_rtx_CONST_INT(SImode, bitpos);
-+ return "cbr\t%0, %2";
-+ } else if ( (INTVAL(operands[2]) >= 0) &&
-+ (INTVAL(operands[2]) <= 65535) )
-+ return "andl\t%0, %2, COH";
-+ else if ( (INTVAL(operands[2]) < 0) &&
-+ (INTVAL(operands[2]) >= -65536 ) )
-+ return "andl\t%0, lo(%2)";
-+ else if ( ((INTVAL(operands[2]) & 0xffff) == 0xffff) )
-+ return "andh\t%0, hi(%2)";
-+ else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+ return "andh\t%0, hi(%2), COH";
-+ else
-+ return "andh\t%0, hi(%2)\;andl\t%0, lo(%2)";
-+ case 3:
-+ return "and\t%0, %1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ [(set_attr "length" "2,4,8,4")
-+ (set_attr "cc" "set_z")])
-+
-+
-+(define_insn "anddi3"
-+ [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+ (and:DI (match_operand:DI 1 "register_operand" "%0,r")
-+ (match_operand:DI 2 "register_operand" "r,r")))]
-+ ""
-+ "#"
-+ [(set_attr "length" "8")
-+ (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; or
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise inclusive-or between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "iorsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (ior:SI (match_operand:SI 1 "register_operand" "%0,0,r" )
-+ (match_operand:SI 2 "nonmemory_operand" "r ,i,r")))]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "or\t%0, %2";
-+ case 1:
-+ if ( one_bit_set_operand(operands[2], VOIDmode) ){
-+ int bitpos;
-+ for (bitpos = 0; bitpos < 32; bitpos++)
-+ if (INTVAL(operands[2]) & (1 << bitpos))
-+ break;
-+ operands[2] = gen_rtx_CONST_INT( SImode, bitpos);
-+ return "sbr\t%0, %2";
-+ } else if ( (INTVAL(operands[2]) >= 0) &&
-+ (INTVAL(operands[2]) <= 65535) )
-+ return "orl\t%0, %2";
-+ else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+ return "orh\t%0, hi(%2)";
-+ else
-+ return "orh\t%0, hi(%2)\;orl\t%0, lo(%2)";
-+ case 2:
-+ return "or\t%0, %1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,8,4")
-+ (set_attr "cc" "set_z")])
-+
-+
-+;(define_insn "iorsi3"
-+; [(set (match_operand:SI 0 "register_operand" "=r, r, r")
-+; (ior:SI (match_operand:SI 1 "avr32_logical_insn_operand" "r, r, rA" )
-+; (match_operand:SI 2 "register_operand" "0, i, r")))]
-+; ""
-+; {
-+; switch (which_alternative){
-+; case 0:
-+; return "or %0, %2";
-+; case 1:
-+; if ( one_bit_set_operand(operands[2], VOIDmode) ){
-+; int i, bitpos;
-+; for ( i = 0; i < 32; i++ )
-+; if ( INTVAL(operands[2]) & (1 << i) ){
-+; bitpos = i;
-+; break;
-+; }
-+; operands[2] = gen_rtx_CONST_INT( SImode, bitpos);
-+; return "sbr %0, %2";
-+; } else if ( (INTVAL(operands[2]) >= 0) &&
-+; (INTVAL(operands[2]) <= 65535) )
-+; return "orl %0, %2";
-+; else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+; return "orh %0, hi(%2)";
-+; else
-+; return "orh %0, hi(%2)\;orl %0, lo(%2)";
-+; case 2:
-+; return "or %0, %2, %1";
-+; }
-+; }
-+; [(set_attr "length" "2,8,4")
-+; (set_attr "cc" "set_z")])
-+
-+(define_insn "iordi3"
-+ [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+ (ior:DI (match_operand:DI 1 "register_operand" "%0,r")
-+ (match_operand:DI 2 "register_operand" "r,r")))]
-+ ""
-+ "#"
-+ [(set_attr "length" "8")
-+ (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; xor bytes
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise exclusive-or between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "xorsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (xor:SI (match_operand:SI 1 "register_operand" "0,0,r")
-+ (match_operand:SI 2 "nonmemory_operand" "r,i,r")))]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "eor %0, %2";
-+ case 1:
-+ if ( (INTVAL(operands[2]) >= 0) &&
-+ (INTVAL(operands[2]) <= 65535) )
-+ return "eorl %0, %2";
-+ else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+ return "eorh %0, hi(%2)";
-+ else
-+ return "eorh %0, hi(%2)\;eorl %0, lo(%2)";
-+ case 2:
-+ return "eor %0, %1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ [(set_attr "length" "2,8,4")
-+ (set_attr "cc" "set_z")])
-+
-+(define_insn "xordi3"
-+ [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+ (xor:DI (match_operand:DI 1 "register_operand" "%0,r")
-+ (match_operand:DI 2 "register_operand" "r,r")))]
-+ ""
-+ "#"
-+ [(set_attr "length" "8")
-+ (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; divmod
-+;;-----------------------------------------------------------------------------
-+;; Signed division that produces both a quotient and a remainder.
-+;;=============================================================================
-+(define_expand "divmodsi4"
-+ [(parallel [
-+ (parallel [
-+ (set (match_operand:SI 0 "register_operand" "=r")
-+ (div:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))
-+ (set (match_operand:SI 3 "register_operand" "=r")
-+ (mod:SI (match_dup 1)
-+ (match_dup 2)))])
-+ (use (match_dup 4))])]
-+ ""
-+ {
-+ if (! no_new_pseudos) {
-+ operands[4] = gen_reg_rtx (DImode);
-+
-+ emit_insn(gen_divmodsi4_internal(operands[4],operands[1],operands[2]));
-+ emit_move_insn(operands[0], gen_rtx_SUBREG( SImode, operands[4], 4));
-+ emit_move_insn(operands[3], gen_rtx_SUBREG( SImode, operands[4], 0));
-+
-+ DONE;
-+ } else {
-+ FAIL;
-+ }
-+
-+ })
-+
-+
-+(define_insn "divmodsi4_internal"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (unspec:DI [(match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")]
-+ UNSPEC_DIVMODSI4_INTERNAL))]
-+ ""
-+ "divs %0, %1, %2"
-+ [(set_attr "type" "div")
-+ (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; udivmod
-+;;-----------------------------------------------------------------------------
-+;; Unsigned division that produces both a quotient and a remainder.
-+;;=============================================================================
-+(define_expand "udivmodsi4"
-+ [(parallel [
-+ (parallel [
-+ (set (match_operand:SI 0 "register_operand" "=r")
-+ (udiv:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")))
-+ (set (match_operand:SI 3 "register_operand" "=r")
-+ (umod:SI (match_dup 1)
-+ (match_dup 2)))])
-+ (use (match_dup 4))])]
-+ ""
-+ {
-+ if (! no_new_pseudos) {
-+ operands[4] = gen_reg_rtx (DImode);
-+
-+ emit_insn(gen_udivmodsi4_internal(operands[4],operands[1],operands[2]));
-+ emit_move_insn(operands[0], gen_rtx_SUBREG( SImode, operands[4], 4));
-+ emit_move_insn(operands[3], gen_rtx_SUBREG( SImode, operands[4], 0));
-+
-+ DONE;
-+ } else {
-+ FAIL;
-+ }
-+ })
-+
-+(define_insn "udivmodsi4_internal"
-+ [(set (match_operand:DI 0 "register_operand" "=r")
-+ (unspec:DI [(match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "register_operand" "r")]
-+ UNSPEC_UDIVMODSI4_INTERNAL))]
-+ ""
-+ "divu %0, %1, %2"
-+ [(set_attr "type" "div")
-+ (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; Arithmetic-shift left
-+;;-----------------------------------------------------------------------------
-+;; Arithmetic-shift reg0 left by reg2 or immediate value.
-+;;=============================================================================
-+
-+(define_insn "ashlsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (ashift:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+ (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+ ""
-+ "@
-+ lsl %0, %1, %2
-+ lsl %0, %2
-+ lsl %0, %1, %2"
-+ [(set_attr "length" "4,2,4")
-+ (set_attr "cc" "set_ncz")])
-+
-+;;=============================================================================
-+;; Arithmetic-shift right
-+;;-----------------------------------------------------------------------------
-+;; Arithmetic-shift reg0 right by an immediate value.
-+;;=============================================================================
-+
-+(define_insn "ashrsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (ashiftrt:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+ (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+ ""
-+ "@
-+ asr %0, %1, %2
-+ asr %0, %2
-+ asr %0, %1, %2"
-+ [(set_attr "length" "4,2,4")
-+ (set_attr "cc" "set_ncz")])
-+
-+;;=============================================================================
-+;; Logical shift right
-+;;-----------------------------------------------------------------------------
-+;; Logical shift reg0 right by an immediate value.
-+;;=============================================================================
-+
-+(define_insn "lshrsi3"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+ (lshiftrt:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+ (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+ ""
-+ "@
-+ lsr %0, %1, %2
-+ lsr %0, %2
-+ lsr %0, %1, %2"
-+ [(set_attr "length" "4,2,4")
-+ (set_attr "cc" "set_ncz")])
-+
-+
-+;;=============================================================================
-+;; neg
-+;;-----------------------------------------------------------------------------
-+;; Negate operand 1 and store the result in operand 0.
-+;;=============================================================================
-+(define_insn "negsi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (neg:SI (match_operand:SI 1 "register_operand" "0")))]
-+ ""
-+ "neg %0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "set_vncz")])
-+
-+;;=============================================================================
-+;; abs
-+;;-----------------------------------------------------------------------------
-+;; Store the absolute value of operand 1 into operand 0.
-+;;=============================================================================
-+(define_insn "abssi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (abs:SI (match_operand:SI 1 "register_operand" "0")))]
-+ ""
-+ "abs %0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "set_z")])
-+
-+
-+;;=============================================================================
-+;; one_cmpl
-+;;-----------------------------------------------------------------------------
-+;; Store the bitwise-complement of operand 1 into operand 0.
-+;;=============================================================================
-+
-+(define_insn "one_cmplsi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r")
-+ (not:SI (match_operand:SI 1 "register_operand" "r,0")))]
-+ ""
-+ "@
-+ rsub %0, %1, -1
-+ com %0"
-+ [(set_attr "length" "4,2")
-+ (set_attr "cc" "set_z")])
-+
-+
-+;;=============================================================================
-+;; Bit load
-+;;-----------------------------------------------------------------------------
-+;; Load a bit into Z and C flags
-+;;=============================================================================
-+(define_insn "bldsi"
-+ [(set (cc0)
-+ (and:SI (match_operand:SI 0 "register_operand" "r")
-+ (match_operand:SI 1 "one_bit_set_operand" "i")))]
-+ ""
-+ "bld\t%0, %p1"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "bld")]
-+ )
-+
-+
-+;;=============================================================================
-+;; Compare
-+;;-----------------------------------------------------------------------------
-+;; Compare reg0 with reg1 or an immediate value.
-+;;=============================================================================
-+
-+(define_expand "cmpqi"
-+ [(set (cc0)
-+ (compare:QI
-+ (match_operand:QI 0 "general_operand" "")
-+ (match_operand:QI 1 "general_operand" "")))]
-+ ""
-+ "{
-+
-+ if ( GET_CODE(operands[0]) != REG
-+ && GET_CODE(operands[0]) != SUBREG)
-+ operands[0] = force_reg(QImode, operands[0]);
-+
-+
-+ if ( GET_CODE(operands[1]) != REG
-+ && GET_CODE(operands[1]) != SUBREG )
-+ operands[1] = force_reg(QImode, operands[1]);
-+
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+ emit_insn(gen_cmpqi_internal(operands[0], operands[1]));
-+ DONE;
-+ }"
-+)
-+
-+
-+(define_insn "cmpqi_internal"
-+ [(set (cc0)
-+ (compare:QI
-+ (match_operand:QI 0 "register_operand" "r")
-+ (match_operand:QI 1 "register_operand" "r")))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), QImode, operands[0], operands[1]));
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "compare")])
-+
-+(define_expand "cmphi"
-+ [(set (cc0)
-+ (compare:HI
-+ (match_operand:HI 0 "register_operand" "")
-+ (match_operand:HI 1 "register_operand" "")))]
-+ ""
-+ "{
-+
-+ //if ( (GET_CODE(operands[0]) == REG
-+ // || GET_CODE(operands[0]) == SUBREG)
-+ // && (GET_CODE(operands[1]) == CONST_INT
-+ // && avr32_const_ok_for_constraint_p (INTVAL(operands[1]), 'K', \"Ks21\")) ){
-+ // operands[0] = convert_to_mode(SImode, operands[0], 0);
-+ // avr32_compare_op0 = operands[0];
-+ // avr32_compare_op1 = operands[1];
-+ // emit_insn(gen_cmpsi_internal(operands[0], operands[1]));
-+ // DONE;
-+ //}
-+
-+ if ( GET_CODE(operands[0]) != REG
-+ && GET_CODE(operands[0]) != SUBREG )
-+ operands[0] = force_reg(HImode, operands[0]);
-+
-+
-+ if ( GET_CODE(operands[1]) != REG
-+ && GET_CODE(operands[1]) != SUBREG)
-+ operands[1] = force_reg(HImode, operands[1]);
-+
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+ }"
-+)
-+
-+
-+(define_insn "cmphi_internal"
-+ [(set (cc0)
-+ (compare:HI
-+ (match_operand:HI 0 "register_operand" "r")
-+ (match_operand:HI 1 "register_operand" "r")))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), HImode, operands[0], operands[1]));
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "compare")])
-+
-+
-+(define_expand "cmpsi"
-+ [(set (cc0)
-+ (compare:SI
-+ (match_operand:SI 0 "register_operand" "")
-+ (match_operand:SI 1 "register_immediate_operand" "")))]
-+ ""
-+ "{
-+ if ( GET_CODE(operands[0]) != REG
-+ && GET_CODE(operands[0]) != SUBREG )
-+ operands[0] = force_reg(SImode, operands[0]);
-+
-+ if ( GET_CODE(operands[1]) != REG
-+ && GET_CODE(operands[1]) != SUBREG
-+ && GET_CODE(operands[1]) != CONST_INT )
-+ operands[1] = force_reg(SImode, operands[1]);
-+
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+
-+ }"
-+)
-+
-+
-+(define_insn "cmpsi_internal"
-+ [(set (cc0)
-+ (compare:SI
-+ (match_operand:SI 0 "register_operand" "r, r, r")
-+ (match_operand:SI 1 "register_immediate_operand" "r, Ks06, Ks21")))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), SImode, operands[0], operands[1]));
-+ return "";
-+ }
-+
-+ [(set_attr "length" "2,2,4")
-+ (set_attr "cc" "compare")])
-+
-+
-+(define_expand "cmpdi"
-+ [(set (cc0)
-+ (compare:DI
-+ (match_operand:DI 0 "register_operand" "")
-+ (match_operand:DI 1 "register_immediate_operand" "")))]
-+ ""
-+ {
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+ }
-+)
-+
-+(define_insn "cmpdi_internal"
-+ [(set (cc0)
-+ (compare:DI
-+ (match_operand:DI 0 "register_operand" "r")
-+ (match_operand:DI 1 "register_immediate_operand" "rKu20")))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), DImode, operands[0], operands[1]));
-+ return "";
-+ }
-+
-+ [(set_attr "length" "6")
-+ (set_attr "type" "alu2")
-+ (set_attr "cc" "compare")])
-+
-+
-+
-+;;=============================================================================
-+;; Test if zero
-+;;-----------------------------------------------------------------------------
-+;; Compare reg against zero and set the condition codes.
-+;;=============================================================================
-+
-+
-+(define_expand "tstsi"
-+ [(set (cc0)
-+ (match_operand:SI 0 "register_operand" ""))]
-+ ""
-+ {
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = const0_rtx;
-+ }
-+)
-+
-+(define_insn "tstsi_internal"
-+ [(set (cc0)
-+ (match_operand:SI 0 "register_operand" "r"))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), SImode, operands[0], const0_rtx));
-+
-+ return "";
-+ }
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "compare")])
-+
-+
-+(define_expand "tstdi"
-+ [(set (cc0)
-+ (match_operand:DI 0 "register_operand" ""))]
-+ ""
-+ {
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = const0_rtx;
-+ }
-+)
-+
-+(define_insn "tstdi_internal"
-+ [(set (cc0)
-+ (match_operand:DI 0 "register_operand" "r"))]
-+ ""
-+ {
-+ set_next_insn_cond(insn,
-+ avr32_output_cmp(get_next_insn_cond(insn), DImode, operands[0], const0_rtx));
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu2")
-+ (set_attr "cc" "compare")])
-+
-+
-+
-+;;=============================================================================
-+;; Convert operands
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+(define_insn "truncdisi2"
-+ [(set (match_operand:SI 0 "general_operand" "")
-+ (truncate:SI (match_operand:DI 1 "general_operand" "")))]
-+ ""
-+ "truncdisi2")
-+
-+;;=============================================================================
-+;; Extend
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+
-+
-+(define_insn "extendhisi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+ (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "casts.h\t%0";
-+ case 1:
-+ return "bfexts\t%0, %1, 0, 16";
-+ case 2:
-+ case 3:
-+ return "ld.sh\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz,set_ncz,none,none")
-+ (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "extendqisi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+ (sign_extend:SI (match_operand:QI 1 "extendqi_operand" "0,r,RKu00,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "casts.b\t%0";
-+ case 1:
-+ return "bfexts\t%0, %1, 0, 8";
-+ case 2:
-+ case 3:
-+ return "ld.sb\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz,set_ncz,none,none")
-+ (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "extendqihi2"
-+ [(set (match_operand:HI 0 "register_operand" "=r,r,r,r")
-+ (sign_extend:HI (match_operand:QI 1 "extendqi_operand" "0,r,RKu00,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "casts.b\t%0";
-+ case 1:
-+ return "bfexts\t%0, %1, 0, 8";
-+ case 2:
-+ case 3:
-+ return "ld.sb\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz,set_ncz,none,none")
-+ (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+
-+;;=============================================================================
-+;; Zero-extend
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+
-+(define_insn "zero_extendhisi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+ (zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "castu.h\t%0";
-+ case 1:
-+ return "bfextu\t%0, %1, 0, 16";
-+ case 2:
-+ case 3:
-+ return "ld.uh\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz,set_ncz,none,none")
-+ (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "zero_extendqisi2"
-+ [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+ (zero_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "castu.b\t%0";
-+ case 1:
-+ return "bfextu\t%0, %1, 0, 8";
-+ case 2:
-+ case 3:
-+ return "ld.ub\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz, set_ncz, none, none")
-+ (set_attr "type" "alu, alu, load_rm, load_rm")])
-+
-+(define_insn "zero_extendqihi2"
-+ [(set (match_operand:HI 0 "register_operand" "=r,r,r,r")
-+ (zero_extend:HI (match_operand:QI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ return "castu.b\t%0";
-+ case 1:
-+ return "bfextu\t%0, %1, 0, 8";
-+ case 2:
-+ case 3:
-+ return "ld.ub\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,2,4")
-+ (set_attr "cc" "set_ncz, set_ncz, none, none")
-+ (set_attr "type" "alu, alu, load_rm, load_rm")])
-+
-+
-+
-+;;=============================================================================
-+;; Conditional set register
-+;; sr{cond4} rd
-+;;-----------------------------------------------------------------------------
-+
-+;;Because of the same issue as with conditional moves and adds we must
-+;;not separate the compare instrcution from the scc instruction as
-+;;they might be sheduled "badly".
-+
-+(define_insn "s<code>"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (any_cond:SI (cc0)
-+ (const_int 0)))]
-+ ""
-+ "sr<cond>\t%0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "smi"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec:SI [(cc0)
-+ (const_int 0)] UNSPEC_COND_MI))]
-+ ""
-+ "srmi\t%0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "none")])
-+
-+(define_insn "spl"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec:SI [(cc0)
-+ (const_int 0)] UNSPEC_COND_PL))]
-+ ""
-+ "srpl\t%0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; Conditional branch
-+;;-----------------------------------------------------------------------------
-+;; Branch to label if the specified condition codes are set.
-+;;=============================================================================
-+; branch if negative
-+(define_insn "bmi"
-+ [(set (pc)
-+ (if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_MI)
-+ (label_ref (match_operand 0 "" ""))
-+ (pc)))]
-+ ""
-+ "brmi %0"
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+(define_insn "*bmi-reverse"
-+ [(set (pc)
-+ (if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_MI)
-+ (pc)
-+ (label_ref (match_operand 0 "" ""))))]
-+ ""
-+ "brpl %0"
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+; branch if positive
-+(define_insn "bpl"
-+ [(set (pc)
-+ (if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_PL)
-+ (label_ref (match_operand 0 "" ""))
-+ (pc)))]
-+ ""
-+ "brpl %0"
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+(define_insn "*bpl-reverse"
-+ [(set (pc)
-+ (if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_PL)
-+ (pc)
-+ (label_ref (match_operand 0 "" ""))))]
-+ ""
-+ "brmi %0"
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+; branch if equal
-+(define_insn "b<code>"
-+ [(set (pc)
-+ (if_then_else (any_cond:CC (cc0)
-+ (const_int 0))
-+ (label_ref (match_operand 0 "" ""))
-+ (pc)))]
-+ ""
-+ "br<cond> %0 "
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+
-+(define_insn "*b<code>-reverse"
-+ [(set (pc)
-+ (if_then_else (any_cond:CC (cc0)
-+ (const_int 0))
-+ (pc)
-+ (label_ref (match_operand 0 "" ""))))]
-+ ""
-+ "br<invcond> %0 "
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+ (le (minus (pc) (match_dup 0)) (const_int 256)))
-+ (const_int 2)] ; use compact branch
-+ (const_int 4))) ; use extended branch
-+ (set_attr "cc" "none")])
-+
-+
-+
-+;=============================================================================
-+; Conditional Add/Subtract
-+;-----------------------------------------------------------------------------
-+; sub{cond4} Rd, imm
-+;=============================================================================
-+
-+
-+(define_expand "add<mode>cc"
-+ [(set (match_operand:ADDCC 0 "register_operand" "")
-+ (if_then_else:ADDCC (match_operator 1 "avr32_comparison_operator"
-+ [(match_dup 4)
-+ (match_dup 5)])
-+ (match_operand:ADDCC 2 "register_operand" "")
-+ (plus:ADDCC
-+ (match_dup 2)
-+ (match_operand:ADDCC 3 "avr32_cond_immediate_operand" ""))))]
-+ ""
-+ {
-+ /* Delete compare instruction as it is merged into this instruction */
-+ remove_insn (get_last_insn_anywhere ());
-+
-+ operands[4] = avr32_compare_op0;
-+ operands[5] = avr32_compare_op1;
-+ }
-+ )
-+
-+
-+(define_insn "add<ADDCC:mode>cc_cmp<CMP:mode>"
-+ [(set (match_operand:ADDCC 0 "register_operand" "=r")
-+ (if_then_else:ADDCC (match_operator 1 "avr32_comparison_operator"
-+ [(match_operand:CMP 4 "register_operand" "r")
-+ (match_operand:CMP 5 "<CMP:cmp_predicate>" "<CMP:cmp_constraint>")])
-+ (match_operand:ADDCC 2 "register_operand" "0")
-+ (plus:ADDCC
-+ (match_dup 2)
-+ (match_operand:ADDCC 3 "avr32_cond_immediate_operand" "Is08"))))]
-+ ""
-+ {
-+ operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+ return "sub%i1\t%0, -%3";
-+ }
-+ [(set_attr "length" "8")
-+ (set_attr "cc" "cmp_cond_insn")])
-+
-+;=============================================================================
-+; Conditional Move
-+;-----------------------------------------------------------------------------
-+; mov{cond4} Rd, (Rs/imm)
-+;=============================================================================
-+(define_expand "mov<mode>cc"
-+ [(set (match_operand:MOVCC 0 "register_operand" "")
-+ (if_then_else:MOVCC (match_operator 1 "avr32_comparison_operator"
-+ [(match_dup 4)
-+ (match_dup 5)])
-+ (match_operand:MOVCC 2 "avr32_cond_register_immediate_operand" "")
-+ (match_operand:MOVCC 3 "avr32_cond_register_immediate_operand" "")))]
-+ ""
-+ {
-+ /* Delete compare instruction as it is merged into this instruction */
-+ remove_insn (get_last_insn_anywhere ());
-+
-+ operands[4] = avr32_compare_op0;
-+ operands[5] = avr32_compare_op1;
-+ }
-+ )
-+
-+
-+(define_insn "mov<MOVCC:mode>cc_cmp<CMP:mode>"
-+ [(set (match_operand:MOVCC 0 "register_operand" "=r,r,r")
-+ (if_then_else:MOVCC (match_operator 1 "avr32_comparison_operator"
-+ [(match_operand:CMP 4 "register_operand" "r,r,r")
-+ (match_operand:CMP 5 "<CMP:cmp_predicate>" "<CMP:cmp_constraint>,<CMP:cmp_constraint>,<CMP:cmp_constraint>")])
-+ (match_operand:MOVCC 2 "avr32_cond_register_immediate_operand" "0, rKs08,rKs08")
-+ (match_operand:MOVCC 3 "avr32_cond_register_immediate_operand" "rKs08,0,rKs08")))]
-+ ""
-+ {
-+ operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+ switch( which_alternative ){
-+ case 0:
-+ return "mov%i1 %0, %3";
-+ case 1:
-+ return "mov%1 %0, %2";
-+ case 2:
-+ return "mov%1 %0, %2\;mov%i1 %0, %3";
-+ default:
-+ abort();
-+ }
-+
-+
-+ }
-+ [(set_attr "length" "8,8,12")
-+ (set_attr "cc" "cmp_cond_insn")])
-+
-+
-+;;=============================================================================
-+;; jump
-+;;-----------------------------------------------------------------------------
-+;; Jump inside a function; an unconditional branch to a label.
-+;;=============================================================================
-+(define_insn "jump"
-+ [(set (pc)
-+ (label_ref (match_operand 0 "" "")))]
-+ ""
-+ {
-+ if (get_attr_length(insn) > 4)
-+ return "Can't jump this far";
-+ return (get_attr_length(insn) == 2 ?
-+ "rjmp %0" : "bral %0");
-+ }
-+ [(set_attr "type" "branch")
-+ (set (attr "length")
-+ (cond [(and (le (minus (match_dup 0) (pc)) (const_int 1022))
-+ (le (minus (pc) (match_dup 0)) (const_int 1024)))
-+ (const_int 2) ; use rjmp
-+ (le (match_dup 0) (const_int 1048575))
-+ (const_int 4)] ; use bral
-+ (const_int 8))) ; do something else
-+ (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; call
-+;;-----------------------------------------------------------------------------
-+;; Subroutine call instruction returning no value.
-+;;=============================================================================
-+(define_insn "call_internal"
-+ [(parallel [(call (mem:SI (match_operand:SI 0 "avr32_call_operand" "r,U,T,W"))
-+ (match_operand 1 "" ""))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "icall\t%0";
-+ case 1:
-+ return "rcall\t%0";
-+ case 2:
-+ return "mcall\t%0";
-+ case 3:
-+ if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+ return "call\t%0";
-+ else
-+ return "mcall\tr6[%0@got]";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "type" "call")
-+ (set_attr "length" "2,4,4,10")
-+ (set_attr "cc" "clobber")])
-+
-+
-+(define_expand "call"
-+ [(parallel [(call (match_operand:SI 0 "" "")
-+ (match_operand 1 "" ""))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ""
-+ {
-+ rtx call_address;
-+ if ( GET_CODE(operands[0]) != MEM )
-+ FAIL;
-+
-+ call_address = XEXP(operands[0], 0);
-+
-+ /* If assembler supports call pseudo insn and the call
-+ address is a symbol then nothing special needs to be done. */
-+ if ( TARGET_HAS_ASM_ADDR_PSEUDOS
-+ && (GET_CODE(call_address) == SYMBOL_REF) ){
-+ /* We must however mark the function as using the GOT if
-+ flag_pic is set, since the call insn might turn into
-+ a mcall using the GOT ptr register. */
-+ if ( flag_pic ){
-+ current_function_uses_pic_offset_table = 1;
-+ emit_call_insn(gen_call_internal(call_address, operands[1]));
-+ DONE;
-+ }
-+ } else {
-+ if ( flag_pic &&
-+ GET_CODE(call_address) == SYMBOL_REF ){
-+ current_function_uses_pic_offset_table = 1;
-+ emit_call_insn(gen_call_internal(call_address, operands[1]));
-+ DONE;
-+ }
-+
-+ if ( !SYMBOL_REF_RCALL_FUNCTION_P(operands[0]) ){
-+ if ( optimize_size &&
-+ GET_CODE(call_address) == SYMBOL_REF ){
-+ call_address = force_const_mem(SImode, call_address);
-+ } else {
-+ call_address = force_reg(SImode, call_address);
-+ }
-+ }
-+ }
-+ emit_call_insn(gen_call_internal(call_address, operands[1]));
-+ DONE;
-+ }
-+)
-+
-+;;=============================================================================
-+;; call_value
-+;;-----------------------------------------------------------------------------
-+;; Subrutine call instruction returning a value.
-+;;=============================================================================
-+(define_expand "call_value"
-+ [(parallel [(set (match_operand:SI 0 "" "")
-+ (call (match_operand:SI 1 "" "")
-+ (match_operand 2 "" "")))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ""
-+ {
-+ rtx call_address;
-+ if ( GET_CODE(operands[1]) != MEM )
-+ FAIL;
-+
-+ call_address = XEXP(operands[1], 0);
-+
-+ /* If assembler supports call pseudo insn and the call
-+ address is a symbol then nothing special needs to be done. */
-+ if ( TARGET_HAS_ASM_ADDR_PSEUDOS
-+ && (GET_CODE(call_address) == SYMBOL_REF) ){
-+ /* We must however mark the function as using the GOT if
-+ flag_pic is set, since the call insn might turn into
-+ a mcall using the GOT ptr register. */
-+ if ( flag_pic ) {
-+ current_function_uses_pic_offset_table = 1;
-+ emit_call_insn(gen_call_value_internal(operands[0], call_address, operands[2]));
-+ DONE;
-+ }
-+ } else {
-+ if ( flag_pic &&
-+ GET_CODE(call_address) == SYMBOL_REF ){
-+ current_function_uses_pic_offset_table = 1;
-+ emit_call_insn(gen_call_value_internal(operands[0], call_address, operands[2]));
-+ DONE;
-+ }
-+
-+ if ( !SYMBOL_REF_RCALL_FUNCTION_P(operands[1]) ){
-+ if ( optimize_size &&
-+ GET_CODE(call_address) == SYMBOL_REF){
-+ call_address = force_const_mem(SImode, call_address);
-+ } else {
-+ call_address = force_reg(SImode, call_address);
-+ }
-+ }
-+ }
-+ emit_call_insn(gen_call_value_internal(operands[0], call_address,
-+ operands[2]));
-+ DONE;
-+
-+ })
-+
-+(define_insn "call_value_internal"
-+ [(parallel [(set (match_operand 0 "register_operand" "=r,r,r,r")
-+ (call (mem:SI (match_operand:SI 1 "avr32_call_operand" "r,U,T,W"))
-+ (match_operand 2 "" "")))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ;; Operand 2 not used on the AVR32.
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "icall\t%1";
-+ case 1:
-+ return "rcall\t%1";
-+ case 2:
-+ return "mcall\t%1";
-+ case 3:
-+ if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+ return "call\t%1";
-+ else
-+ return "mcall\tr6[%1@got]";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "type" "call")
-+ (set_attr "length" "2,4,4,10")
-+ (set_attr "cc" "call_set")])
-+
-+
-+;;=============================================================================
-+;; untyped_call
-+;;-----------------------------------------------------------------------------
-+;; Subrutine call instruction returning a value of any type.
-+;; The code is copied from m68k.md (except gen_blockage is removed)
-+;; Fixme!
-+;;=============================================================================
-+(define_expand "untyped_call"
-+ [(parallel [(call (match_operand 0 "avr32_call_operand" "")
-+ (const_int 0))
-+ (match_operand 1 "" "")
-+ (match_operand 2 "" "")])]
-+ ""
-+ {
-+ int i;
-+
-+ emit_call_insn (GEN_CALL (operands[0], const0_rtx, NULL, const0_rtx));
-+
-+ for (i = 0; i < XVECLEN (operands[2], 0); i++) {
-+ rtx set = XVECEXP (operands[2], 0, i);
-+ emit_move_insn (SET_DEST (set), SET_SRC (set));
-+ }
-+
-+ /* The optimizer does not know that the call sets the function value
-+ registers we stored in the result block. We avoid problems by
-+ claiming that all hard registers are used and clobbered at this
-+ point. */
-+ emit_insn (gen_blockage ());
-+
-+ DONE;
-+ })
-+
-+
-+;;=============================================================================
-+;; return
-+;;=============================================================================
-+
-+(define_insn "return"
-+ [(return)]
-+ "USE_RETURN_INSN (FALSE)"
-+ {
-+ avr32_output_return_instruction(TRUE, FALSE, NULL, NULL);
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "type" "call")]
-+ )
-+
-+(define_insn "return_cond"
-+ [(set (pc)
-+ (if_then_else (match_operand 0 "avr32_comparison_operand" "")
-+ (return)
-+ (pc)))]
-+ "USE_RETURN_INSN (TRUE)"
-+ "ret%0\tr12";
-+ [(set_attr "type" "call")])
-+
-+
-+(define_insn "return_imm"
-+ [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+ (use (reg RETVAL_REGNUM))
-+ (return)])]
-+ "USE_RETURN_INSN (FALSE) &&
-+ ((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+ {
-+ avr32_output_return_instruction(TRUE, FALSE, NULL, operands[0]);
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "type" "call")]
-+ )
-+
-+(define_insn "return_imm_cond"
-+ [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+ (use (reg RETVAL_REGNUM))
-+ (set (pc)
-+ (if_then_else (match_operand 1 "avr32_comparison_operand" "")
-+ (return)
-+ (pc)))])]
-+ "USE_RETURN_INSN (TRUE) &&
-+ ((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+ "ret%1\t%0";
-+ [(set_attr "type" "call")]
-+ )
-+
-+(define_insn "return_<mode>reg"
-+ [(set (reg RETVAL_REGNUM) (match_operand:MOVM 0 "register_operand" "r"))
-+ (use (reg RETVAL_REGNUM))
-+ (return)]
-+ "USE_RETURN_INSN (TRUE)"
-+ "retal %0";
-+ [(set_attr "type" "call")]
-+ )
-+
-+(define_insn "return_<mode>reg_cond"
-+ [(set (reg RETVAL_REGNUM) (match_operand:MOVM 0 "register_operand" "r"))
-+ (use (reg RETVAL_REGNUM))
-+ (set (pc)
-+ (if_then_else (match_operator 1 "avr32_comparison_operator"
-+ [(cc0) (const_int 0)])
-+ (return)
-+ (pc)))]
-+ "USE_RETURN_INSN (TRUE)"
-+ "ret%1\t%0";
-+ [(set_attr "type" "call")])
-+
-+;;=============================================================================
-+;; nop
-+;;-----------------------------------------------------------------------------
-+;; No-op instruction.
-+;;=============================================================================
-+(define_insn "nop"
-+ [(const_int 0)]
-+ ""
-+ "nop"
-+ [(set_attr "length" "2")
-+ (set_attr "type" "alu")
-+ (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; nonlocal_goto_receiver
-+;;-----------------------------------------------------------------------------
-+;; For targets with a return stack we must make sure to flush the return stack
-+;; since it will be corrupt after a nonlocal goto.
-+;;=============================================================================
-+(define_expand "nonlocal_goto_receiver"
-+ [(const_int 0)]
-+ "TARGET_RETURN_STACK"
-+ "
-+ {
-+ emit_insn ( gen_frs() );
-+ DONE;
-+ }
-+ "
-+ )
-+
-+
-+;;=============================================================================
-+;; builtin_setjmp_receiver
-+;;-----------------------------------------------------------------------------
-+;; For pic code we need to reload the pic register.
-+;; For targets with a return stack we must make sure to flush the return stack
-+;; since it will probably be corrupted.
-+;;=============================================================================
-+(define_expand "builtin_setjmp_receiver"
-+ [(label_ref (match_operand 0 "" ""))]
-+ "flag_pic"
-+ "
-+ {
-+ if ( TARGET_RETURN_STACK )
-+ emit_insn ( gen_frs() );
-+ avr32_load_pic_register ();
-+ DONE;
-+ }
-+ "
-+)
-+
-+
-+;;=============================================================================
-+;; indirect_jump
-+;;-----------------------------------------------------------------------------
-+;; Jump to an address in reg or memory.
-+;;=============================================================================
-+(define_expand "indirect_jump"
-+ [(set (pc)
-+ (match_operand:SI 0 "general_operand" ""))]
-+ ""
-+ {
-+ /* One of the ops has to be in a register. */
-+ if ( (flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS )
-+ && !avr32_legitimate_pic_operand_p(operands[0]) )
-+ operands[0] = legitimize_pic_address (operands[0], SImode, 0);
-+ else if ( flag_pic && avr32_address_operand(operands[0], GET_MODE(operands[0])) )
-+ /* If we have an address operand then this function uses the pic register. */
-+ current_function_uses_pic_offset_table = 1;
-+ })
-+
-+
-+(define_insn "indirect_jump_internal"
-+ [(set (pc)
-+ (match_operand:SI 0 "general_operand" "r,m,W"))]
-+ ""
-+ {
-+ switch( which_alternative ){
-+ case 0:
-+ return "mov\tpc, %0";
-+ case 1:
-+ if ( avr32_const_pool_ref_operand(operands[0], GET_MODE(operands[0])) )
-+ return "lddpc\tpc, %0";
-+ else
-+ return "ld.w\tpc, %0";
-+ case 2:
-+ if ( flag_pic )
-+ return "ld.w\tpc, r6[%0@got]";
-+ else
-+ return "lda.w\tpc, %0";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "2,4,8")
-+ (set_attr "type" "call,call,call")
-+ (set_attr "cc" "none,none,clobber")])
-+
-+
-+;;=============================================================================
-+;; casesi and tablejump
-+;;=============================================================================
-+(define_insn "tablejump_add"
-+ [(set (pc)
-+ (plus:SI (match_operand:SI 0 "register_operand" "r")
-+ (mult:SI (match_operand:SI 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku04" ))))
-+ (use (label_ref (match_operand 3 "" "")))]
-+ "flag_pic &&
-+ ((INTVAL(operands[2]) == 0) || (INTVAL(operands[2]) == 2) ||
-+ (INTVAL(operands[2]) == 4) || (INTVAL(operands[2]) == 8))"
-+ "add\tpc, %0, %1 << %p2"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "clobber")])
-+
-+(define_insn "tablejump_insn"
-+ [(set (pc) (match_operand:SI 0 "memory_operand" "m"))
-+ (use (label_ref (match_operand 1 "" "")))]
-+ "!flag_pic"
-+ "ld.w\tpc, %0"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "call")
-+ (set_attr "cc" "none")])
-+
-+(define_expand "casesi"
-+ [(match_operand:SI 0 "register_operand" "") ; index to jump on
-+ (match_operand:SI 1 "const_int_operand" "") ; lower bound
-+ (match_operand:SI 2 "const_int_operand" "") ; total range
-+ (match_operand:SI 3 "" "") ; table label
-+ (match_operand:SI 4 "" "")] ; Out of range label
-+ ""
-+ "
-+ {
-+ rtx reg;
-+ rtx index = operands[0];
-+ rtx low_bound = operands[1];
-+ rtx range = operands[2];
-+ rtx table_label = operands[3];
-+ rtx oor_label = operands[4];
-+
-+ if (low_bound != const0_rtx)
-+ {
-+ if (!avr32_const_ok_for_constraint_p(INTVAL (low_bound), 'I', \"Is21\")){
-+ reg = force_reg(SImode, GEN_INT (INTVAL (low_bound)));
-+ emit_insn (gen_subsi3 (reg, index,
-+ reg));
-+ } else {
-+ reg = gen_reg_rtx (SImode);
-+ emit_insn (gen_addsi3 (reg, index,
-+ GEN_INT (-INTVAL (low_bound))));
-+ }
-+ index = reg;
-+ }
-+
-+ if (!avr32_const_ok_for_constraint_p (INTVAL (range), 'K', \"Ks21\"))
-+ range = force_reg (SImode, range);
-+
-+ emit_cmp_and_jump_insns ( index, range, GTU, NULL_RTX, SImode, 1, oor_label );
-+ reg = gen_reg_rtx (SImode);
-+ emit_move_insn ( reg, gen_rtx_LABEL_REF (VOIDmode, table_label));
-+
-+ if ( flag_pic )
-+ emit_jump_insn ( gen_tablejump_add ( reg, index, GEN_INT(4), table_label));
-+ else
-+ emit_jump_insn (
-+ gen_tablejump_insn ( gen_rtx_MEM ( SImode,
-+ gen_rtx_PLUS ( SImode,
-+ reg,
-+ gen_rtx_MULT ( SImode,
-+ index,
-+ GEN_INT(4)))),
-+ table_label));
-+ DONE;
-+ }"
-+)
-+
-+
-+
-+(define_insn "prefetch"
-+ [(prefetch (match_operand:SI 0 "register_operand" "r")
-+ (match_operand 1 "const_int_operand" "")
-+ (match_operand 2 "const_int_operand" ""))]
-+ ""
-+ {
-+ return "pref\t%0[0]";
-+ }
-+
-+ [(set_attr "length" "4")
-+ (set_attr "type" "load")
-+ (set_attr "cc" "none")])
-+
-+
-+
-+;;=============================================================================
-+;; prologue
-+;;-----------------------------------------------------------------------------
-+;; This pattern, if defined, emits RTL for entry to a function. The function
-+;; entry i responsible for setting up the stack frame, initializing the frame
-+;; pointer register, saving callee saved registers, etc.
-+;;=============================================================================
-+(define_expand "prologue"
-+ [(clobber (const_int 0))]
-+ ""
-+ "
-+ avr32_expand_prologue();
-+ DONE;
-+ "
-+ )
-+
-+;;=============================================================================
-+;; eh_return
-+;;-----------------------------------------------------------------------------
-+;; This pattern, if defined, affects the way __builtin_eh_return, and
-+;; thence the call frame exception handling library routines, are
-+;; built. It is intended to handle non-trivial actions needed along
-+;; the abnormal return path.
-+;;
-+;; The address of the exception handler to which the function should
-+;; return is passed as operand to this pattern. It will normally need
-+;; to copied by the pattern to some special register or memory
-+;; location. If the pattern needs to determine the location of the
-+;; target call frame in order to do so, it may use
-+;; EH_RETURN_STACKADJ_RTX, if defined; it will have already been
-+;; assigned.
-+;;
-+;; If this pattern is not defined, the default action will be to
-+;; simply copy the return address to EH_RETURN_HANDLER_RTX. Either
-+;; that macro or this pattern needs to be defined if call frame
-+;; exception handling is to be used.
-+
-+;; We can't expand this before we know where the link register is stored.
-+(define_insn_and_split "eh_return"
-+ [(unspec_volatile [(match_operand:SI 0 "register_operand" "r")]
-+ VUNSPEC_EH_RETURN)
-+ (clobber (match_scratch:SI 1 "=&r"))]
-+ ""
-+ "#"
-+ "reload_completed"
-+ [(const_int 0)]
-+ "
-+ {
-+ avr32_set_return_address (operands[0], operands[1]);
-+ DONE;
-+ }"
-+ )
-+
-+;;=============================================================================
-+;; ffssi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "ffssi2"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (ffs:SI (match_operand:SI 1 "register_operand" "r"))) ]
-+ ""
-+ "mov %0, %1
-+ brev %0
-+ clz %0, %0
-+ sub %0, -1
-+ cp %0, 33
-+ moveq %0, 0"
-+ [(set_attr "length" "18")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+
-+
-+;;=============================================================================
-+;; swap_h
-+;;-----------------------------------------------------------------------------
-+(define_insn "*swap_h"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (ior:SI (ashift:SI (match_dup 0) (const_int 16))
-+ (lshiftrt:SI (match_dup 0) (const_int 16))))]
-+ ""
-+ "swap.h %0"
-+ [(set_attr "length" "2")]
-+ )
-+
-+(define_insn_and_split "bswap_16"
-+ [ (set (match_operand:HI 0 "avr32_bswap_operand" "=r,RKs13,r")
-+ (ior:HI (and:HI (lshiftrt:HI (match_operand:HI 1 "avr32_bswap_operand" "r,r,RKs13")
-+ (const_int 8))
-+ (const_int 255))
-+ (ashift:HI (and:HI (match_dup 1)
-+ (const_int 255))
-+ (const_int 8))))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ if ( REGNO(operands[0]) == REGNO(operands[1]))
-+ return "swap.bh\t%0";
-+ else
-+ return "mov\t%0, %1\;swap.bh\t%0";
-+ case 1:
-+ return "stswp.h\t%0, %1";
-+ case 2:
-+ return "ldswp.sh\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+
-+ "(reload_completed &&
-+ REG_P(operands[0]) && REG_P(operands[1])
-+ && (REGNO(operands[0]) != REGNO(operands[1])))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 0)
-+ (ior:HI (and:HI (lshiftrt:HI (match_dup 0)
-+ (const_int 8))
-+ (const_int 255))
-+ (ashift:HI (and:HI (match_dup 0)
-+ (const_int 255))
-+ (const_int 8))))]
-+ ""
-+
-+ [(set_attr "length" "4,4,4")
-+ (set_attr "type" "alu,store,load_rm")]
-+ )
-+
-+(define_insn_and_split "bswap_32"
-+ [ (set (match_operand:SI 0 "avr32_bswap_operand" "=r,RKs14,r")
-+ (ior:SI (ior:SI (lshiftrt:SI (and:SI (match_operand:SI 1 "avr32_bswap_operand" "=r,r,RKs14")
-+ (const_int 4278190080))
-+ (const_int 24))
-+ (lshiftrt:SI (and:SI (match_dup 1)
-+ (const_int 16711680))
-+ (const_int 8)))
-+ (ior:SI (ashift:SI (and:SI (match_dup 1)
-+ (const_int 65280))
-+ (const_int 8))
-+ (ashift:SI (and:SI (match_dup 1)
-+ (const_int 255))
-+ (const_int 24)))))]
-+ ""
-+ {
-+ switch ( which_alternative ){
-+ case 0:
-+ if ( REGNO(operands[0]) == REGNO(operands[1]))
-+ return "swap.b\t%0";
-+ else
-+ return "mov\t%0, %1\;swap.b\t%0";
-+ case 1:
-+ return "stswp.w\t%0, %1";
-+ case 2:
-+ return "ldswp.w\t%0, %1";
-+ default:
-+ abort();
-+ }
-+ }
-+ "(reload_completed &&
-+ REG_P(operands[0]) && REG_P(operands[1])
-+ && (REGNO(operands[0]) != REGNO(operands[1])))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 0)
-+ (ior:SI (ior:SI (lshiftrt:SI (and:SI (match_dup 0)
-+ (const_int 4278190080))
-+ (const_int 24))
-+ (lshiftrt:SI (and:SI (match_dup 0)
-+ (const_int 16711680))
-+ (const_int 8)))
-+ (ior:SI (ashift:SI (and:SI (match_dup 0)
-+ (const_int 65280))
-+ (const_int 8))
-+ (ashift:SI (and:SI (match_dup 0)
-+ (const_int 255))
-+ (const_int 24)))))]
-+ ""
-+
-+ [(set_attr "length" "4,4,4")
-+ (set_attr "type" "alu,store,load_rm")]
-+ )
-+
-+
-+;;=============================================================================
-+;; blockage
-+;;-----------------------------------------------------------------------------
-+;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
-+;; all of memory. This blocks insns from being moved across this point.
-+
-+(define_insn "blockage"
-+ [(unspec_volatile [(const_int 0)] VUNSPEC_BLOCKAGE)]
-+ ""
-+ ""
-+ [(set_attr "length" "0")]
-+)
-+
-+;;=============================================================================
-+;; clzsi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "clzsi2"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (clz:SI (match_operand:SI 1 "register_operand" "r"))) ]
-+ ""
-+ "clz %0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "set_z")]
-+ )
-+
-+;;=============================================================================
-+;; ctzsi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "ctzsi2"
-+ [ (set (match_operand:SI 0 "register_operand" "=r,r")
-+ (ctz:SI (match_operand:SI 1 "register_operand" "0,r"))) ]
-+ ""
-+ "@
-+ brev\t%0\;clz\t%0, %0
-+ mov\t%0, %1\;brev\t%0\;clz\t%0, %0"
-+ [(set_attr "length" "8")
-+ (set_attr "cc" "set_z")]
-+ )
-+
-+;;=============================================================================
-+;; cache instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "cache"
-+ [ (unspec_volatile [(match_operand:SI 0 "register_operand" "r")
-+ (match_operand:SI 1 "immediate_operand" "Ku05")] VUNSPEC_CACHE)]
-+ ""
-+ "cache %0[0], %1"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "sync"
-+ [ (unspec_volatile [(match_operand:SI 0 "immediate_operand" "Ku08")] VUNSPEC_SYNC)]
-+ ""
-+ "sync %0"
-+ [(set_attr "length" "4")]
-+ )
-+
-+;;=============================================================================
-+;; TLB instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "tlbr"
-+ [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBR)]
-+ ""
-+ "tlbr"
-+ [(set_attr "length" "2")]
-+ )
-+
-+(define_insn "tlbw"
-+ [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBW)]
-+ ""
-+ "tlbw"
-+ [(set_attr "length" "2")]
-+ )
-+
-+(define_insn "tlbs"
-+ [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBS)]
-+ ""
-+ "tlbs"
-+ [(set_attr "length" "2")]
-+ )
-+
-+;;=============================================================================
-+;; Breakpoint instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "breakpoint"
-+ [ (unspec_volatile [(const_int 0)] VUNSPEC_BREAKPOINT)]
-+ ""
-+ "breakpoint"
-+ [(set_attr "length" "2")]
-+ )
-+
-+
-+;;=============================================================================
-+;; mtsr/mfsr instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "mtsr"
-+ [ (unspec_volatile [(match_operand 0 "immediate_operand" "i")
-+ (match_operand:SI 1 "register_operand" "r")] VUNSPEC_MTSR)]
-+ ""
-+ "mtsr\t%0, %1"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mfsr"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec_volatile:SI [(match_operand 1 "immediate_operand" "i")] VUNSPEC_MFSR)) ]
-+ ""
-+ "mfsr\t%0, %1"
-+ [(set_attr "length" "4")]
-+ )
-+
-+;;=============================================================================
-+;; mtdr/mfdr instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "mtdr"
-+ [ (unspec_volatile [(match_operand 0 "immediate_operand" "i")
-+ (match_operand:SI 1 "register_operand" "r")] VUNSPEC_MTDR)]
-+ ""
-+ "mtdr\t%0, %1"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mfdr"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec_volatile:SI [(match_operand 1 "immediate_operand" "i")] VUNSPEC_MFDR)) ]
-+ ""
-+ "mfdr\t%0, %1"
-+ [(set_attr "length" "4")]
-+ )
-+
-+;;=============================================================================
-+;; musfr
-+;;-----------------------------------------------------------------------------
-+(define_insn "musfr"
-+ [ (unspec_volatile [(match_operand:SI 0 "register_operand" "r")] VUNSPEC_MUSFR)]
-+ ""
-+ "musfr\t%0"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+(define_insn "mustr"
-+ [ (set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec_volatile:SI [(const_int 0)] VUNSPEC_MUSTR)) ]
-+ ""
-+ "mustr\t%0"
-+ [(set_attr "length" "2")]
-+ )
-+
-+;;=============================================================================
-+;; Flush Return Stack instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "frs"
-+ [ (unspec_volatile [(const_int 0)] VUNSPEC_FRS)]
-+ ""
-+ "frs"
-+ [(set_attr "length" "2")
-+ (set_attr "cc" "none")]
-+ )
-+
-+
-+;;=============================================================================
-+;; Saturation Round Scale instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "sats"
-+ [ (set (match_operand:SI 0 "register_operand" "+r")
-+ (unspec:SI [(match_dup 0)
-+ (match_operand 1 "immediate_operand" "Ku05")
-+ (match_operand 2 "immediate_operand" "Ku05")]
-+ UNSPEC_SATS)) ]
-+ "TARGET_DSP"
-+ "sats\t%0 >> %1, %2"
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")]
-+ )
-+
-+(define_insn "satu"
-+ [ (set (match_operand:SI 0 "register_operand" "+r")
-+ (unspec:SI [(match_dup 0)
-+ (match_operand 1 "immediate_operand" "Ku05")
-+ (match_operand 2 "immediate_operand" "Ku05")]
-+ UNSPEC_SATU)) ]
-+ "TARGET_DSP"
-+ "satu\t%0 >> %1, %2"
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")]
-+ )
-+
-+(define_insn "satrnds"
-+ [ (set (match_operand:SI 0 "register_operand" "+r")
-+ (unspec:SI [(match_dup 0)
-+ (match_operand 1 "immediate_operand" "Ku05")
-+ (match_operand 2 "immediate_operand" "Ku05")]
-+ UNSPEC_SATRNDS)) ]
-+ "TARGET_DSP"
-+ "satrnds\t%0 >> %1, %2"
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")]
-+ )
-+
-+(define_insn "satrndu"
-+ [ (set (match_operand:SI 0 "register_operand" "+r")
-+ (unspec:SI [(match_dup 0)
-+ (match_operand 1 "immediate_operand" "Ku05")
-+ (match_operand 2 "immediate_operand" "Ku05")]
-+ UNSPEC_SATRNDU)) ]
-+ "TARGET_DSP"
-+ "sats\t%0 >> %1, %2"
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")]
-+ )
-+
-+;; Special patterns for dealing with the constant pool
-+
-+(define_insn "align_4"
-+ [(unspec_volatile [(const_int 0)] VUNSPEC_ALIGN)]
-+ ""
-+ {
-+ assemble_align (32);
-+ return "";
-+ }
-+ [(set_attr "length" "2")]
-+)
-+
-+(define_insn "consttable_start"
-+ [(unspec_volatile [(const_int 0)] VUNSPEC_POOL_START)]
-+ ""
-+ {
-+ return ".cpool";
-+ }
-+ [(set_attr "length" "0")]
-+ )
-+
-+(define_insn "consttable_end"
-+ [(unspec_volatile [(const_int 0)] VUNSPEC_POOL_END)]
-+ ""
-+ {
-+ making_const_table = FALSE;
-+ return "";
-+ }
-+ [(set_attr "length" "0")]
-+)
-+
-+
-+(define_insn "consttable_4"
-+ [(unspec_volatile [(match_operand 0 "" "")] VUNSPEC_POOL_4)]
-+ ""
-+ {
-+ making_const_table = TRUE;
-+ switch (GET_MODE_CLASS (GET_MODE (operands[0])))
-+ {
-+ case MODE_FLOAT:
-+ {
-+ REAL_VALUE_TYPE r;
-+ char real_string[1024];
-+ REAL_VALUE_FROM_CONST_DOUBLE (r, operands[0]);
-+ real_to_decimal(real_string, &r, 1024, 0, 1);
-+ asm_fprintf (asm_out_file, "\t.float\t%s\n", real_string);
-+ break;
-+ }
-+ default:
-+ assemble_integer (operands[0], 4, 0, 1);
-+ break;
-+ }
-+ return "";
-+ }
-+ [(set_attr "length" "4")]
-+)
-+
-+(define_insn "consttable_8"
-+ [(unspec_volatile [(match_operand 0 "" "")] VUNSPEC_POOL_8)]
-+ ""
-+ {
-+ making_const_table = TRUE;
-+ switch (GET_MODE_CLASS (GET_MODE (operands[0])))
-+ {
-+ case MODE_FLOAT:
-+ {
-+ REAL_VALUE_TYPE r;
-+ char real_string[1024];
-+ REAL_VALUE_FROM_CONST_DOUBLE (r, operands[0]);
-+ real_to_decimal(real_string, &r, 1024, 0, 1);
-+ asm_fprintf (asm_out_file, "\t.double\t%s\n", real_string);
-+ break;
-+ }
-+ default:
-+ assemble_integer(operands[0], 8, 0, 1);
-+ break;
-+ }
-+ return "";
-+ }
-+ [(set_attr "length" "8")]
-+)
-+
-+(define_insn "consttable_16"
-+ [(unspec_volatile [(match_operand 0 "" "")] VUNSPEC_POOL_16)]
-+ ""
-+ {
-+ making_const_table = TRUE;
-+ assemble_integer(operands[0], 16, 0, 1);
-+ return "";
-+ }
-+ [(set_attr "length" "16")]
-+)
-+
-+;;=============================================================================
-+;; coprocessor instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "cop"
-+ [ (unspec_volatile [(match_operand 0 "immediate_operand" "Ku03")
-+ (match_operand 1 "immediate_operand" "Ku04")
-+ (match_operand 2 "immediate_operand" "Ku04")
-+ (match_operand 3 "immediate_operand" "Ku04")
-+ (match_operand 4 "immediate_operand" "Ku07")] VUNSPEC_COP)]
-+ ""
-+ "cop\tcp%0, cr%1, cr%2, cr%3, %4"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mvcrsi"
-+ [ (set (match_operand:SI 0 "avr32_cop_move_operand" "=r,<,Z")
-+ (unspec_volatile:SI [(match_operand 1 "immediate_operand" "Ku03,Ku03,Ku03")
-+ (match_operand 2 "immediate_operand" "Ku04,Ku04,Ku04")]
-+ VUNSPEC_MVCR)) ]
-+ ""
-+ "@
-+ mvcr.w\tcp%1, %0, cr%2
-+ stcm.w\tcp%1, %0, cr%2
-+ stc.w\tcp%1, %0, cr%2"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mvcrdi"
-+ [ (set (match_operand:DI 0 "avr32_cop_move_operand" "=r,<,Z")
-+ (unspec_volatile:DI [(match_operand 1 "immediate_operand" "Ku03,Ku03,Ku03")
-+ (match_operand 2 "immediate_operand" "Ku04,Ku04,Ku04")]
-+ VUNSPEC_MVCR)) ]
-+ ""
-+ "@
-+ mvcr.d\tcp%1, %0, cr%2
-+ stcm.d\tcp%1, %0, cr%2-cr%i2
-+ stc.d\tcp%1, %0, cr%2"
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mvrcsi"
-+ [ (unspec_volatile:SI [(match_operand 0 "immediate_operand" "Ku03,Ku03,Ku03")
-+ (match_operand 1 "immediate_operand" "Ku04,Ku04,Ku04")
-+ (match_operand:SI 2 "avr32_cop_move_operand" "r,>,Z")]
-+ VUNSPEC_MVRC)]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "mvrc.w\tcp%0, cr%1, %2";
-+ case 1:
-+ return "ldcm.w\tcp%0, %2, cr%1";
-+ case 2:
-+ return "ldc.w\tcp%0, cr%1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "4")]
-+ )
-+
-+(define_insn "mvrcdi"
-+ [ (unspec_volatile:DI [(match_operand 0 "immediate_operand" "Ku03,Ku03,Ku03")
-+ (match_operand 1 "immediate_operand" "Ku04,Ku04,Ku04")
-+ (match_operand:DI 2 "avr32_cop_move_operand" "r,>,Z")]
-+ VUNSPEC_MVRC)]
-+ ""
-+ {
-+ switch (which_alternative){
-+ case 0:
-+ return "mvrc.d\tcp%0, cr%1, %2";
-+ case 1:
-+ return "ldcm.d\tcp%0, %2, cr%1-cr%i1";
-+ case 2:
-+ return "ldc.d\tcp%0, cr%1, %2";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "length" "4")]
-+ )
-+
-+;;=============================================================================
-+;; epilogue
-+;;-----------------------------------------------------------------------------
-+;; This pattern emits RTL for exit from a function. The function exit is
-+;; responsible for deallocating the stack frame, restoring callee saved
-+;; registers and emitting the return instruction.
-+;; ToDo: using TARGET_ASM_FUNCTION_PROLOGUE instead.
-+;;=============================================================================
-+(define_expand "epilogue"
-+ [(unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+ ""
-+ "
-+ if (USE_RETURN_INSN (FALSE)){
-+ emit_jump_insn (gen_return ());
-+ DONE;
-+ }
-+ emit_jump_insn (gen_rtx_UNSPEC_VOLATILE (VOIDmode,
-+ gen_rtvec (1,
-+ gen_rtx_RETURN (VOIDmode)),
-+ VUNSPEC_EPILOGUE));
-+ DONE;
-+ "
-+ )
-+
-+(define_insn "*epilogue_insns"
-+ [(unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+ ""
-+ {
-+ avr32_output_return_instruction (FALSE, FALSE, NULL, NULL);
-+ return "";
-+ }
-+ ; Length is absolute worst case
-+ [(set_attr "type" "branch")
-+ (set_attr "length" "12")]
-+ )
-+
-+(define_insn "*epilogue_insns_ret_imm"
-+ [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+ (use (reg RETVAL_REGNUM))
-+ (unspec_volatile [(return)] VUNSPEC_EPILOGUE)])]
-+ "((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+ {
-+ avr32_output_return_instruction (FALSE, FALSE, NULL, operands[0]);
-+ return "";
-+ }
-+ ; Length is absolute worst case
-+ [(set_attr "type" "branch")
-+ (set_attr "length" "12")]
-+ )
-+
-+(define_insn "sibcall_epilogue"
-+ [(unspec_volatile [(const_int 0)] VUNSPEC_EPILOGUE)]
-+ ""
-+ {
-+ avr32_output_return_instruction (FALSE, FALSE, NULL, NULL);
-+ return "";
-+ }
-+;; Length is absolute worst case
-+ [(set_attr "type" "branch")
-+ (set_attr "length" "12")]
-+ )
-+
-+(define_insn "*sibcall_epilogue_insns_ret_imm"
-+ [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+ (use (reg RETVAL_REGNUM))
-+ (unspec_volatile [(const_int 0)] VUNSPEC_EPILOGUE)])]
-+ "((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+ {
-+ avr32_output_return_instruction (FALSE, FALSE, NULL, operands[0]);
-+ return "";
-+ }
-+ ; Length is absolute worst case
-+ [(set_attr "type" "branch")
-+ (set_attr "length" "12")]
-+ )
-+
-+(define_insn "ldxi"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (mem:SI (plus:SI
-+ (match_operand:SI 1 "register_operand" "r")
-+ (mult:SI (zero_extract:SI (match_operand:SI 2 "register_operand" "r")
-+ (const_int 8)
-+ (match_operand:SI 3 "immediate_operand" "Ku05"))
-+ (const_int 4)))))]
-+ "(INTVAL(operands[3]) == 24 || INTVAL(operands[3]) == 16 || INTVAL(operands[3]) == 8
-+ || INTVAL(operands[3]) == 0)"
-+ {
-+ switch ( INTVAL(operands[3]) ){
-+ case 0:
-+ return "ld.w %0, %1[%2:b << 2]";
-+ case 8:
-+ return "ld.w %0, %1[%2:l << 2]";
-+ case 16:
-+ return "ld.w %0, %1[%2:u << 2]";
-+ case 24:
-+ return "ld.w %0, %1[%2:t << 2]";
-+ default:
-+ internal_error("illegal operand for ldxi");
-+ }
-+ }
-+ [(set_attr "type" "load")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-+
-+
-+
-+
-+
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; sub r8, r7, 8
-+;; st.w r8[0x0], r12
-+;; to
-+;; sub r8, r7, 8
-+;; st.w r7[-0x8], r12
-+;;=============================================================================
-+; (set (reg:SI 9 r8)
-+; (plus:SI (reg/f:SI 6 r7)
-+; (const_int ...)))
-+; (set (mem:SI (reg:SI 9 r8))
-+; (reg:SI 12 r12))
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (plus:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")))
-+ (set (mem:SI (match_dup 0))
-+ (match_operand:SI 3 "register_operand" ""))]
-+ "REGNO(operands[0]) != REGNO(operands[1]) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'K', \"Ks16\")"
-+ [(set (match_dup 0)
-+ (plus:SI (match_dup 1)
-+ (match_dup 2)))
-+ (set (mem:SI (plus:SI (match_dup 1)
-+ (match_dup 2)))
-+ (match_dup 3))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; sub r6, r7, 4
-+;; ld.w r6, r6[0x0]
-+;; to
-+;; sub r6, r7, 4
-+;; ld.w r6, r7[-0x4]
-+;;=============================================================================
-+; (set (reg:SI 7 r6)
-+; (plus:SI (reg/f:SI 6 r7)
-+; (const_int -4 [0xfffffffc])))
-+; (set (reg:SI 7 r6)
-+; (mem:SI (reg:SI 7 r6)))
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (plus:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "immediate_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (mem:SI (match_dup 0)))]
-+ "REGNO(operands[0]) != REGNO(operands[1]) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'K', \"Ks16\")"
-+ [(set (match_dup 0)
-+ (plus:SI (match_dup 1)
-+ (match_dup 2)))
-+ (set (match_dup 3)
-+ (mem:SI (plus:SI (match_dup 1)
-+ (match_dup 2))))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; ld.sb r0, r7[-0x6]
-+;; cashs.b r0
-+;; to
-+;; ld.sb r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+ [(set (match_operand:QI 0 "register_operand" "")
-+ (match_operand:QI 1 "load_sb_memory_operand" ""))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (sign_extend:SI (match_dup 0)))]
-+ "(REGNO(operands[0]) == REGNO(operands[2]) || peep2_reg_dead_p(2, operands[0]))"
-+ [(set (match_dup 2)
-+ (sign_extend:SI (match_dup 1)))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; ld.ub r0, r7[-0x6]
-+;; cashu.b r0
-+;; to
-+;; ld.ub r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+ [(set (match_operand:QI 0 "register_operand" "")
-+ (match_operand:QI 1 "memory_operand" ""))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (zero_extend:SI (match_dup 0)))]
-+ "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 2)
-+ (zero_extend:SI (match_dup 1)))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; ld.sh r0, r7[-0x6]
-+;; casts.h r0
-+;; to
-+;; ld.sh r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+ [(set (match_operand:HI 0 "register_operand" "")
-+ (match_operand:HI 1 "memory_operand" ""))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (sign_extend:SI (match_dup 0)))]
-+ "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 2)
-+ (sign_extend:SI (match_dup 1)))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; ld.uh r0, r7[-0x6]
-+;; castu.h r0
-+;; to
-+;; ld.uh r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+ [(set (match_operand:HI 0 "register_operand" "")
-+ (match_operand:HI 1 "memory_operand" ""))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (zero_extend:SI (match_dup 0)))]
-+ "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 2)
-+ (zero_extend:SI (match_dup 1)))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; mul rd, rx, ry
-+;; add rd2, rd
-+;; to
-+;; mac rd2, rx, ry
-+;;=============================================================================
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (mult:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "register_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (plus:SI (match_dup 3)
-+ (match_dup 0)))]
-+ "peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 3)
-+ (plus:SI (mult:SI (match_dup 1)
-+ (match_dup 2))
-+ (match_dup 3)))]
-+ "")
-+
-+
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;; bfextu rd, rs, k5, 1 or and(h/l) rd, one_bit_set_mask
-+;; to
-+;; bld rs, k5
-+;;
-+;; If rd is dead after the operation.
-+;;=============================================================================
-+(define_peephole2
-+ [ (set (match_operand:SI 0 "register_operand" "")
-+ (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+ (const_int 1)
-+ (match_operand:SI 2 "immediate_operand" "")))
-+ (set (cc0)
-+ (match_dup 0))]
-+ "peep2_reg_dead_p(2, operands[0])"
-+ [(set (cc0)
-+ (and:SI (match_dup 1)
-+ (match_dup 2)))]
-+ "operands[2] = GEN_INT(1 << INTVAL(operands[2]));")
-+
-+(define_peephole2
-+ [ (set (match_operand:SI 0 "register_operand" "")
-+ (and:SI (match_operand:SI 1 "register_operand" "")
-+ (match_operand:SI 2 "one_bit_set_operand" "")))
-+ (set (cc0)
-+ (match_dup 0))]
-+ "peep2_reg_dead_p(2, operands[0])"
-+ [(set (cc0)
-+ (and:SI (match_dup 1)
-+ (match_dup 2)))]
-+ "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Load with extracted index: ld.w Rd, Rb[Ri:{t/u/b/l} << 2]
-+;;
-+;;=============================================================================
-+
-+
-+(define_peephole
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+ (const_int 8)
-+ (match_operand:SI 2 "avr32_extract_shift_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 4 "register_operand" ""))))]
-+
-+ "(dead_or_set_p(insn, operands[0]))"
-+ {
-+ switch ( INTVAL(operands[2]) ){
-+ case 0:
-+ return "ld.w %3, %4[%1:b << 2]";
-+ case 8:
-+ return "ld.w %3, %4[%1:l << 2]";
-+ case 16:
-+ return "ld.w %3, %4[%1:u << 2]";
-+ case 24:
-+ return "ld.w %3, %4[%1:t << 2]";
-+ default:
-+ internal_error("illegal operand for ldxi");
-+ }
-+ }
-+ [(set_attr "type" "load")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+
-+
-+(define_peephole
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (and:SI (match_operand:SI 1 "register_operand" "") (const_int 255)))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 3 "register_operand" ""))))]
-+
-+ "(dead_or_set_p(insn, operands[0]))"
-+
-+ "ld.w %2, %3[%1:b << 2]"
-+ [(set_attr "type" "load")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+ (const_int 8)
-+ (match_operand:SI 2 "avr32_extract_shift_operand" "")))
-+ (set (match_operand:SI 3 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 4 "register_operand" ""))))]
-+
-+ "(peep2_reg_dead_p(2, operands[0]))
-+ || (REGNO(operands[0]) == REGNO(operands[3]))"
-+ [(set (match_dup 3)
-+ (mem:SI (plus:SI
-+ (match_dup 4)
-+ (mult:SI (zero_extract:SI (match_dup 1)
-+ (const_int 8)
-+ (match_dup 2))
-+ (const_int 4)))))]
-+ )
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (zero_extend:SI (match_operand:QI 1 "register_operand" "")))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 3 "register_operand" ""))))]
-+
-+ "(peep2_reg_dead_p(2, operands[0]))
-+ || (REGNO(operands[0]) == REGNO(operands[2]))"
-+ [(set (match_dup 2)
-+ (mem:SI (plus:SI
-+ (match_dup 3)
-+ (mult:SI (zero_extract:SI (match_dup 1)
-+ (const_int 8)
-+ (const_int 0))
-+ (const_int 4)))))]
-+ "operands[1] = gen_rtx_REG(SImode, REGNO(operands[1]));"
-+ )
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (and:SI (match_operand:SI 1 "register_operand" "")
-+ (const_int 255)))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 3 "register_operand" ""))))]
-+
-+ "(peep2_reg_dead_p(2, operands[0]))
-+ || (REGNO(operands[0]) == REGNO(operands[2]))"
-+ [(set (match_dup 2)
-+ (mem:SI (plus:SI
-+ (match_dup 3)
-+ (mult:SI (zero_extract:SI (match_dup 1)
-+ (const_int 8)
-+ (const_int 0))
-+ (const_int 4)))))]
-+ ""
-+ )
-+
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (lshiftrt:SI (match_operand:SI 1 "register_operand" "")
-+ (const_int 24)))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+ (match_operand:SI 3 "register_operand" ""))))]
-+
-+ "(peep2_reg_dead_p(2, operands[0]))
-+ || (REGNO(operands[0]) == REGNO(operands[2]))"
-+ [(set (match_dup 2)
-+ (mem:SI (plus:SI
-+ (match_dup 3)
-+ (mult:SI (zero_extract:SI (match_dup 1)
-+ (const_int 8)
-+ (const_int 24))
-+ (const_int 4)))))]
-+ ""
-+ )
-+
-+
-+;;************************************************
-+;; ANDN
-+;;
-+;;************************************************
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (not:SI (match_operand:SI 1 "register_operand" "")))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (and:SI (match_dup 2)
-+ (match_dup 0)))]
-+ "peep2_reg_dead_p(2, operands[0])"
-+
-+ [(set (match_dup 2)
-+ (and:SI (match_dup 2)
-+ (not:SI (match_dup 1))
-+ ))]
-+ ""
-+)
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (not:SI (match_operand:SI 1 "register_operand" "")))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (and:SI (match_dup 0)
-+ (match_dup 2)
-+ ))]
-+ "peep2_reg_dead_p(2, operands[0])"
-+
-+ [(set (match_dup 2)
-+ (and:SI (match_dup 2)
-+ (not:SI (match_dup 1))
-+ ))]
-+
-+ ""
-+)
-+
-+
-+;;=================================================================
-+;; Addabs peephole
-+;;=================================================================
-+
-+(define_peephole
-+ [(set (match_operand:SI 2 "register_operand" "=r")
-+ (abs:SI (match_operand:SI 1 "register_operand" "r")))
-+ (set (match_operand:SI 0 "register_operand" "=r")
-+ (plus:SI (match_operand:SI 3 "register_operand" "r")
-+ (match_dup 2)))]
-+ "dead_or_set_p(insn, operands[2])"
-+ "addabs %0, %3, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "set_z")])
-+
-+(define_peephole
-+ [(set (match_operand:SI 2 "register_operand" "=r")
-+ (abs:SI (match_operand:SI 1 "register_operand" "r")))
-+ (set (match_operand:SI 0 "register_operand" "=r")
-+ (plus:SI (match_dup 2)
-+ (match_operand:SI 3 "register_operand" "r")))]
-+ "dead_or_set_p(insn, operands[2])"
-+ "addabs %0, %3, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "cc" "set_z")])
-+
-+
-+;;=================================================================
-+;; Detect roundings
-+;;=================================================================
-+
-+(define_insn "*round"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (ashiftrt:SI (plus:SI (match_operand:SI 1 "register_operand" "0")
-+ (match_operand:SI 2 "immediate_operand" "i"))
-+ (match_operand:SI 3 "immediate_operand" "i")))]
-+ "avr32_rnd_operands(operands[2], operands[3])"
-+
-+ "satrnds %0 >> %3, 31"
-+
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")]
-+
-+ )
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (plus:SI (match_dup 0)
-+ (match_operand:SI 1 "immediate_operand" "")))
-+ (set (match_dup 0)
-+ (ashiftrt:SI (match_dup 0)
-+ (match_operand:SI 2 "immediate_operand" "")))]
-+ "avr32_rnd_operands(operands[1], operands[2])"
-+
-+ [(set (match_dup 0)
-+ (ashiftrt:SI (plus:SI (match_dup 0)
-+ (match_dup 1))
-+ (match_dup 2)))]
-+ )
-+
-+(define_peephole
-+ [(set (match_operand:SI 0 "register_operand" "r")
-+ (plus:SI (match_dup 0)
-+ (match_operand:SI 1 "immediate_operand" "i")))
-+ (set (match_dup 0)
-+ (ashiftrt:SI (match_dup 0)
-+ (match_operand:SI 2 "immediate_operand" "i")))]
-+ "avr32_rnd_operands(operands[1], operands[2])"
-+
-+ "satrnds %0 >> %2, 31"
-+
-+ [(set_attr "type" "alu_sat")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")]
-+
-+ )
-+
-+
-+;;=================================================================
-+;; mcall
-+;;=================================================================
-+(define_peephole
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (match_operand 1 "avr32_const_pool_ref_operand" ""))
-+ (parallel [(call (mem:SI (match_dup 0))
-+ (match_operand 2 "" ""))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ "dead_or_set_p(insn, operands[0])"
-+ "mcall %1"
-+ [(set_attr "type" "call")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")]
-+)
-+
-+(define_peephole
-+ [(set (match_operand:SI 2 "register_operand" "")
-+ (match_operand 1 "avr32_const_pool_ref_operand" ""))
-+ (parallel [(set (match_operand 0 "register_operand" "")
-+ (call (mem:SI (match_dup 2))
-+ (match_operand 3 "" "")))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ "dead_or_set_p(insn, operands[2])"
-+ "mcall %1"
-+ [(set_attr "type" "call")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "call_set")]
-+)
-+
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (match_operand 1 "avr32_const_pool_ref_operand" ""))
-+ (parallel [(call (mem:SI (match_dup 0))
-+ (match_operand 2 "" ""))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ "peep2_reg_dead_p(2, operands[0])"
-+ [(parallel [(call (mem:SI (match_dup 1))
-+ (match_dup 2))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ""
-+)
-+
-+(define_peephole2
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (match_operand 1 "avr32_const_pool_ref_operand" ""))
-+ (parallel [(set (match_operand 2 "register_operand" "")
-+ (call (mem:SI (match_dup 0))
-+ (match_operand 3 "" "")))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ "(peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[2]) == REGNO(operands[0])))"
-+ [(parallel [(set (match_dup 2)
-+ (call (mem:SI (match_dup 1))
-+ (match_dup 3)))
-+ (clobber (reg:SI LR_REGNUM))])]
-+ ""
-+)
-+
-+;;=================================================================
-+;; Returning a value
-+;;=================================================================
-+
-+
-+(define_peephole
-+ [(set (match_operand 0 "register_operand" "")
-+ (match_operand 1 "register_operand" ""))
-+ (return)]
-+ "USE_RETURN_INSN (TRUE) && (REGNO(operands[0]) == RETVAL_REGNUM)
-+ && (REGNO(operands[1]) != LR_REGNUM)
-+ && (REGNO_REG_CLASS(REGNO(operands[1])) == GENERAL_REGS)"
-+ "retal %1"
-+ [(set_attr "type" "call")
-+ (set_attr "length" "2")]
-+ )
-+
-+
-+(define_peephole
-+ [(set (match_operand 0 "register_operand" "r")
-+ (match_operand 1 "immediate_operand" "i"))
-+ (return)]
-+ "(USE_RETURN_INSN (FALSE) && (REGNO(operands[0]) == RETVAL_REGNUM) &&
-+ ((INTVAL(operands[1]) == -1) || (INTVAL(operands[1]) == 0) || (INTVAL(operands[1]) == 1)))"
-+ {
-+ avr32_output_return_instruction (TRUE, FALSE, NULL, operands[1]);
-+ return "";
-+ }
-+ [(set_attr "type" "call")
-+ (set_attr "length" "4")]
-+ )
-+
-+(define_peephole
-+ [(set (match_operand 0 "register_operand" "r")
-+ (match_operand 1 "immediate_operand" "i"))
-+ (unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+ "(REGNO(operands[0]) == RETVAL_REGNUM) &&
-+ ((INTVAL(operands[1]) == -1) || (INTVAL(operands[1]) == 0) || (INTVAL(operands[1]) == 1))"
-+ {
-+ avr32_output_return_instruction (FALSE, FALSE, NULL, operands[1]);
-+ return "";
-+ }
-+ ; Length is absolute worst case
-+ [(set_attr "type" "branch")
-+ (set_attr "length" "12")]
-+ )
-+
-+(define_peephole
-+ [(set (match_operand 0 "register_operand" "=r")
-+ (if_then_else (match_operator 1 "avr32_comparison_operator"
-+ [(match_operand 4 "register_operand" "r")
-+ (match_operand 5 "register_immediate_operand" "rKs21")])
-+ (match_operand 2 "avr32_cond_register_immediate_operand" "rKs08")
-+ (match_operand 3 "avr32_cond_register_immediate_operand" "rKs08")))
-+ (return)]
-+ "USE_RETURN_INSN (TRUE) && (REGNO(operands[0]) == RETVAL_REGNUM)"
-+ {
-+ operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+ if ( GET_CODE(operands[2]) == REG
-+ && GET_CODE(operands[3]) == REG
-+ && REGNO(operands[2]) != LR_REGNUM
-+ && REGNO(operands[3]) != LR_REGNUM ){
-+ return "ret%1 %2\;ret%i1 %3";
-+ } else if ( GET_CODE(operands[2]) == REG
-+ && GET_CODE(operands[3]) == CONST_INT ){
-+ if ( INTVAL(operands[3]) == -1
-+ || INTVAL(operands[3]) == 0
-+ || INTVAL(operands[3]) == 1 ){
-+ return "ret%1 %2\;ret%i1 %d3";
-+ } else {
-+ return "mov%1 r12, %2\;mov%i1 r12, %3\;retal r12";
-+ }
-+ } else if ( GET_CODE(operands[2]) == CONST_INT
-+ && GET_CODE(operands[3]) == REG ){
-+ if ( INTVAL(operands[2]) == -1
-+ || INTVAL(operands[2]) == 0
-+ || INTVAL(operands[2]) == 1 ){
-+ return "ret%1 %d2\;ret%i1 %3";
-+ } else {
-+ return "mov%1 r12, %2\;mov%i1 r12, %3\;retal r12";
-+ }
-+ } else {
-+ if ( (INTVAL(operands[2]) == -1
-+ || INTVAL(operands[2]) == 0
-+ || INTVAL(operands[2]) == 1 )
-+ && (INTVAL(operands[3]) == -1
-+ || INTVAL(operands[3]) == 0
-+ || INTVAL(operands[3]) == 1 )){
-+ return "ret%1 %d2\;ret%i1 %d3";
-+ } else {
-+ return "mov%1 r12, %2\;mov%i1 r12, %3\;retal r12";
-+ }
-+ }
-+ }
-+
-+ [(set_attr "length" "10")
-+ (set_attr "cc" "none")
-+ (set_attr "type" "call")])
-+
-+
-+;;=================================================================
-+;; mulnhh.w
-+;;=================================================================
-+
-+(define_peephole2
-+ [(set (match_operand:HI 0 "register_operand" "")
-+ (neg:HI (match_operand:HI 1 "register_operand" "")))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mult:SI
-+ (sign_extend:SI (match_dup 0))
-+ (sign_extend:SI (match_operand:HI 3 "register_operand" ""))))]
-+ "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[2]) == REGNO(operands[0]))"
-+ [ (set (match_dup 2)
-+ (mult:SI
-+ (sign_extend:SI (neg:HI (match_dup 1)))
-+ (sign_extend:SI (match_dup 3))))]
-+ ""
-+ )
-+
-+(define_peephole2
-+ [(set (match_operand:HI 0 "register_operand" "")
-+ (neg:HI (match_operand:HI 1 "register_operand" "")))
-+ (set (match_operand:SI 2 "register_operand" "")
-+ (mult:SI
-+ (sign_extend:SI (match_operand:HI 3 "register_operand" ""))
-+ (sign_extend:SI (match_dup 0))))]
-+ "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[2]) == REGNO(operands[0]))"
-+ [ (set (match_dup 2)
-+ (mult:SI
-+ (sign_extend:SI (neg:HI (match_dup 1)))
-+ (sign_extend:SI (match_dup 3))))]
-+ ""
-+ )
-+
-+
-+
-+;;=================================================================
-+;; Vector set and extract operations
-+;;=================================================================
-+(define_insn "vec_setv2hi_hi"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r")
-+ (vec_merge:V2HI
-+ (match_dup 0)
-+ (vec_duplicate:V2HI
-+ (match_operand:HI 1 "register_operand" "r"))
-+ (const_int 1)))]
-+ ""
-+ "bfins\t%0, %1, 16, 16"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")])
-+
-+(define_insn "vec_setv2hi_lo"
-+ [(set (match_operand:V2HI 0 "register_operand" "+r")
-+ (vec_merge:V2HI
-+ (match_dup 0)
-+ (vec_duplicate:V2HI
-+ (match_operand:HI 1 "register_operand" "r"))
-+ (const_int 2)))]
-+ ""
-+ "bfins\t%0, %1, 0, 16"
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")])
-+
-+(define_expand "vec_setv2hi"
-+ [(set (match_operand:V2HI 0 "register_operand" "")
-+ (vec_merge:V2HI
-+ (match_dup 0)
-+ (vec_duplicate:V2HI
-+ (match_operand:HI 1 "register_operand" ""))
-+ (match_operand 2 "immediate_operand" "")))]
-+ ""
-+ { operands[2] = GEN_INT(INTVAL(operands[2]) + 1); }
-+ )
-+
-+(define_insn "vec_extractv2hi"
-+ [(set (match_operand:HI 0 "register_operand" "=r")
-+ (vec_select:HI
-+ (match_operand:V2HI 1 "register_operand" "r")
-+ (parallel [(match_operand:SI 2 "immediate_operand" "i")])))]
-+ ""
-+ {
-+ if ( INTVAL(operands[2]) == 0 )
-+ return "bfextu\t%0, %1, 16, 16";
-+ else
-+ return "bfextu\t%0, %1, 0, 16";
-+ }
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")])
-+
-+(define_insn "vec_extractv4qi"
-+ [(set (match_operand:QI 0 "register_operand" "=r")
-+ (vec_select:QI
-+ (match_operand:V4QI 1 "register_operand" "r")
-+ (parallel [(match_operand:SI 2 "immediate_operand" "i")])))]
-+ ""
-+ {
-+ switch ( INTVAL(operands[2]) ){
-+ case 0:
-+ return "bfextu\t%0, %1, 24, 8";
-+ case 1:
-+ return "bfextu\t%0, %1, 16, 8";
-+ case 2:
-+ return "bfextu\t%0, %1, 8, 8";
-+ case 3:
-+ return "bfextu\t%0, %1, 0, 8";
-+ default:
-+ abort();
-+ }
-+ }
-+ [(set_attr "type" "alu")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "clobber")])
-+
-+
-+(define_insn "concatv2hi"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r, r, r")
-+ (vec_concat:V2HI
-+ (match_operand:HI 1 "register_operand" "r, r, 0")
-+ (match_operand:HI 2 "register_operand" "r, 0, r")))]
-+ ""
-+ "@
-+ mov\t%0, %1\;bfins\t%0, %2, 0, 16
-+ bfins\t%0, %2, 0, 16
-+ bfins\t%0, %1, 16, 16"
-+ [(set_attr "length" "6, 4, 4")
-+ (set_attr "type" "alu")])
-+
-+
-+;; Load the atomic operation description
-+(include "sync.md")
-+
-+;; Load the SIMD description
-+(include "simd.md")
-+
-+;; Load the FP coprocessor patterns
-+(include "fpcp.md")
-Index: gcc-4.2.3/gcc/config/avr32/avr32-modes.def
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32-modes.def 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1 @@
-+VECTOR_MODES (INT, 4); /* V4QI V2HI */
-Index: gcc-4.2.3/gcc/config/avr32/avr32.opt
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32.opt 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1,73 @@
-+; Options for the ATMEL AVR32 port of the compiler.
-+
-+; Copyright 2007 Atmel Corporation.
-+;
-+; This file is part of GCC.
-+;
-+; GCC is free software; you can redistribute it and/or modify it under
-+; the terms of the GNU General Public License as published by the Free
-+; Software Foundation; either version 2, or (at your option) any later
-+; version.
-+;
-+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-+; WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+; for more details.
-+;
-+; You should have received a copy of the GNU General Public License
-+; along with GCC; see the file COPYING. If not, write to the Free
-+; Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-+; 02110-1301, USA.
-+
-+muse-rodata-section
-+Target Report Mask(USE_RODATA_SECTION)
-+Do not put readonly-data in .text section, but in .rodata.
-+
-+mhard-float
-+Target Report Undocumented Mask(HARD_FLOAT)
-+Use floating point coprocessor instructions.
-+
-+msoft-float
-+Target Report Undocumented InverseMask(HARD_FLOAT, SOFT_FLOAT)
-+Use software floating-point library for floating-point operations.
-+
-+force-double-align
-+Target Report RejectNegative Mask(FORCE_DOUBLE_ALIGN)
-+Force double-word alignment for double-word memory accesses.
-+
-+mno-init-got
-+Target Report RejectNegative Mask(NO_INIT_GOT)
-+Do not initialize GOT register before using it when compiling PIC code.
-+
-+mrelax
-+Target Report Mask(RELAX)
-+Let invoked assembler and linker do relaxing (Enabled by default when optimization level is >1).
-+
-+mmd-reorg-opt
-+Target Report Undocumented Mask(MD_REORG_OPTIMIZATION)
-+Perform machine dependent optimizations in reorg stage.
-+
-+masm-addr-pseudos
-+Target Report Mask(HAS_ASM_ADDR_PSEUDOS)
-+Use assembler pseudo-instructions lda.w and call for handling direct addresses. (Enabled by default)
-+
-+mpart=
-+Target Report RejectNegative Joined Var(avr32_part_name)
-+Specify the AVR32 part name
-+
-+mcpu=
-+Target Report RejectNegative Joined Undocumented Var(avr32_part_name)
-+Specify the AVR32 part name (deprecated)
-+
-+march=
-+Target Report RejectNegative Joined Var(avr32_arch_name)
-+Specify the AVR32 architecture name
-+
-+mfast-float
-+Target Report Mask(FAST_FLOAT)
-+Enable fast floating-point library. Enabled by default if the -funsafe-math-optimizations switch is specified.
-+
-+mimm-in-const-pool
-+Target Report Var(avr32_imm_in_const_pool) Init(-1)
-+Put large immediates in constant pool. This is enabled by default for archs with insn-cache.
-+
-Index: gcc-4.2.3/gcc/config/avr32/avr32-protos.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/avr32-protos.h 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1,185 @@
-+/*
-+ Prototypes for exported functions defined in avr32.c
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+ Initial porting by Anders �dland.
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+#ifndef AVR32_PROTOS_H
-+#define AVR32_PROTOS_H
-+
-+extern const int swap_reg[];
-+
-+extern int avr32_valid_macmac_bypass (rtx, rtx);
-+extern int avr32_valid_mulmac_bypass (rtx, rtx);
-+
-+extern int avr32_decode_lcomm_symbol_offset (rtx, int *);
-+extern void avr32_encode_lcomm_symbol_offset (tree, char *, int);
-+
-+extern const char *avr32_strip_name_encoding (const char *);
-+
-+extern rtx avr32_get_note_reg_equiv (rtx insn);
-+
-+extern int avr32_use_return_insn (int iscond);
-+
-+extern void avr32_make_reglist16 (int reglist16_vect, char *reglist16_string);
-+
-+extern void avr32_make_reglist8 (int reglist8_vect, char *reglist8_string);
-+extern void avr32_make_fp_reglist_w (int reglist_mask, char *reglist_string);
-+extern void avr32_make_fp_reglist_d (int reglist_mask, char *reglist_string);
-+
-+extern void avr32_output_return_instruction (int single_ret_inst,
-+ int iscond, rtx cond,
-+ rtx r12_imm);
-+extern void avr32_expand_prologue (void);
-+extern void avr32_set_return_address (rtx source, rtx scratch);
-+
-+extern int avr32_hard_regno_mode_ok (int regno, enum machine_mode mode);
-+extern int avr32_extra_constraint_s (rtx value, const int strict);
-+extern int avr32_eh_return_data_regno (const int n);
-+extern int avr32_initial_elimination_offset (const int from, const int to);
-+extern rtx avr32_function_arg (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+ tree type, int named);
-+extern void avr32_init_cumulative_args (CUMULATIVE_ARGS * cum, tree fntype,
-+ rtx libname, tree fndecl);
-+extern void avr32_function_arg_advance (CUMULATIVE_ARGS * cum,
-+ enum machine_mode mode,
-+ tree type, int named);
-+#ifdef ARGS_SIZE_RTX
-+/* expr.h defines ARGS_SIZE_RTX and `enum direction'. */
-+extern enum direction avr32_function_arg_padding (enum machine_mode mode,
-+ tree type);
-+#endif /* ARGS_SIZE_RTX */
-+extern rtx avr32_function_value (tree valtype, tree func, bool outgoing);
-+extern rtx avr32_libcall_value (enum machine_mode mode);
-+extern int avr32_sched_use_dfa_pipeline_interface (void);
-+extern bool avr32_return_in_memory (tree type, tree fntype);
-+extern void avr32_regs_to_save (char *operand);
-+extern void avr32_target_asm_function_prologue (FILE * file,
-+ HOST_WIDE_INT size);
-+extern void avr32_target_asm_function_epilogue (FILE * file,
-+ HOST_WIDE_INT size);
-+extern void avr32_trampoline_template (FILE * file);
-+extern void avr32_initialize_trampoline (rtx addr, rtx fnaddr,
-+ rtx static_chain);
-+extern int avr32_legitimate_address (enum machine_mode mode, rtx x,
-+ int strict);
-+extern int avr32_legitimate_constant_p (rtx x);
-+
-+extern int avr32_legitimate_pic_operand_p (rtx x);
-+
-+extern rtx avr32_find_symbol (rtx x);
-+extern void avr32_select_section (rtx exp, int reloc, int align);
-+extern void avr32_encode_section_info (tree decl, rtx rtl, int first);
-+extern void avr32_asm_file_end (FILE * stream);
-+extern void avr32_asm_output_ascii (FILE * stream, char *ptr, int len);
-+extern void avr32_asm_output_common (FILE * stream, const char *name,
-+ int size, int rounded);
-+extern void avr32_asm_output_label (FILE * stream, const char *name);
-+extern void avr32_asm_declare_object_name (FILE * stream, char *name,
-+ tree decl);
-+extern void avr32_asm_globalize_label (FILE * stream, const char *name);
-+extern void avr32_asm_weaken_label (FILE * stream, const char *name);
-+extern void avr32_asm_output_external (FILE * stream, tree decl,
-+ const char *name);
-+extern void avr32_asm_output_external_libcall (FILE * stream, rtx symref);
-+extern void avr32_asm_output_labelref (FILE * stream, const char *name);
-+extern void avr32_notice_update_cc (rtx exp, rtx insn);
-+extern void avr32_print_operand (FILE * stream, rtx x, int code);
-+extern void avr32_print_operand_address (FILE * stream, rtx x);
-+
-+extern int avr32_symbol (rtx x);
-+
-+extern void avr32_select_rtx_section (enum machine_mode mode, rtx x,
-+ unsigned HOST_WIDE_INT align);
-+
-+extern int avr32_load_multiple_operation (rtx op, enum machine_mode mode);
-+extern int avr32_store_multiple_operation (rtx op, enum machine_mode mode);
-+
-+extern int avr32_const_ok_for_constraint_p (HOST_WIDE_INT value, char c,
-+ const char *str);
-+
-+extern bool avr32_cannot_force_const_mem (rtx x);
-+
-+extern void avr32_init_builtins (void);
-+
-+extern rtx avr32_expand_builtin (tree exp, rtx target, rtx subtarget,
-+ enum machine_mode mode, int ignore);
-+
-+extern bool avr32_must_pass_in_stack (enum machine_mode mode, tree type);
-+
-+extern bool avr32_strict_argument_naming (CUMULATIVE_ARGS * ca);
-+
-+extern bool avr32_pass_by_reference (CUMULATIVE_ARGS * cum,
-+ enum machine_mode mode,
-+ tree type, bool named);
-+
-+extern rtx avr32_gen_load_multiple (rtx * regs, int count, rtx from,
-+ int write_back, int in_struct_p,
-+ int scalar_p);
-+extern rtx avr32_gen_store_multiple (rtx * regs, int count, rtx to,
-+ int in_struct_p, int scalar_p);
-+extern int avr32_gen_movmemsi (rtx * operands);
-+
-+extern int avr32_rnd_operands (rtx add, rtx shift);
-+extern int avr32_adjust_insn_length (rtx insn, int length);
-+
-+extern int symbol_mentioned_p (rtx x);
-+extern int label_mentioned_p (rtx x);
-+extern rtx legitimize_pic_address (rtx orig, enum machine_mode mode, rtx reg);
-+extern int avr32_address_register_rtx_p (rtx x, int strict_p);
-+extern int avr32_legitimate_index_p (enum machine_mode mode, rtx index,
-+ int strict_p);
-+
-+extern int avr32_const_double_immediate (rtx value);
-+extern void avr32_init_expanders (void);
-+extern rtx avr32_return_addr (int count, rtx frame);
-+extern bool avr32_got_mentioned_p (rtx addr);
-+
-+extern void avr32_final_prescan_insn (rtx insn, rtx * opvec, int noperands);
-+
-+extern int avr32_expand_movcc (enum machine_mode mode, rtx operands[]);
-+extern int avr32_expand_addcc (enum machine_mode mode, rtx operands[]);
-+#ifdef RTX_CODE
-+extern int avr32_expand_scc (RTX_CODE cond, rtx * operands);
-+#endif
-+
-+extern int avr32_store_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_mul_waw_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_valid_load_double_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_valid_load_quad_bypass (rtx insn_out, rtx insn_in);
-+extern rtx avr32_output_cmp (rtx cond, enum machine_mode mode,
-+ rtx op0, rtx op1);
-+
-+rtx get_next_insn_cond (rtx cur_insn);
-+int set_next_insn_cond (rtx cur_insn, rtx cond);
-+void avr32_override_options (void);
-+void avr32_load_pic_register (void);
-+void avr32_optimization_options (int level, int size);
-+void avr32_split_const_expr (enum machine_mode mode,
-+ enum machine_mode new_mode,
-+ rtx expr,
-+ rtx *split_expr);
-+void avr32_get_intval (enum machine_mode mode,
-+ rtx const_expr,
-+ HOST_WIDE_INT *val);
-+
-+
-+#endif /* AVR32_PROTOS_H */
-Index: gcc-4.2.3/gcc/config/avr32/crti.asm
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/crti.asm 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1,64 @@
-+/*
-+ Init/fini stuff for AVR32.
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+/* The code in sections .init and .fini is supposed to be a single
-+ regular function. The function in .init is called directly from
-+ start in crt1.asm. The function in .fini is atexit()ed in crt1.asm
-+ too.
-+
-+ crti.asm contributes the prologue of a function to these sections,
-+ and crtn.asm comes up the epilogue. STARTFILE_SPEC should list
-+ crti.o before any other object files that might add code to .init
-+ or .fini sections, and ENDFILE_SPEC should list crtn.o after any
-+ such object files. */
-+
-+ .file "crti.asm"
-+
-+ .section ".init"
-+/* Just load the GOT */
-+ .align 2
-+ .global _init
-+_init:
-+ stm --sp, r6, lr
-+ lddpc r6, 1f
-+0:
-+ rsub r6, pc
-+ rjmp 2f
-+ .align 2
-+1: .long 0b - _GLOBAL_OFFSET_TABLE_
-+2:
-+
-+ .section ".fini"
-+/* Just load the GOT */
-+ .align 2
-+ .global _fini
-+_fini:
-+ stm --sp, r6, lr
-+ lddpc r6, 1f
-+0:
-+ rsub r6, pc
-+ rjmp 2f
-+ .align 2
-+1: .long 0b - _GLOBAL_OFFSET_TABLE_
-+2:
-+
-Index: gcc-4.2.3/gcc/config/avr32/crtn.asm
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/crtn.asm 2008-05-21 13:45:54.165287871 +0200
-@@ -0,0 +1,44 @@
-+/* Copyright (C) 2001 Free Software Foundation, Inc.
-+ Written By Nick Clifton
-+
-+ This file is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU General Public License as published by the
-+ Free Software Foundation; either version 2, or (at your option) any
-+ later version.
-+
-+ In addition to the permissions in the GNU General Public License, the
-+ Free Software Foundation gives you unlimited permission to link the
-+ compiled version of this file with other programs, and to distribute
-+ those programs without any restriction coming from the use of this
-+ file. (The General Public License restrictions do apply in other
-+ respects; for example, they cover modification of the file, and
-+ distribution when not linked into another program.)
-+
-+ This file is distributed in the hope that it will be useful, but
-+ WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; see the file COPYING. If not, write to
-+ the Free Software Foundation, 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA.
-+
-+ As a special exception, if you link this library with files
-+ compiled with GCC to produce an executable, this does not cause
-+ the resulting executable to be covered by the GNU General Public License.
-+ This exception does not however invalidate any other reasons why
-+ the executable file might be covered by the GNU General Public License.
-+*/
-+
-+
-+
-+
-+ .file "crtn.asm"
-+
-+ .section ".init"
-+ ldm sp++, r6, pc
-+
-+ .section ".fini"
-+ ldm sp++, r6, pc
-+
-Index: gcc-4.2.3/gcc/config/avr32/fpcp.md
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/fpcp.md 2008-05-21 13:45:54.169287542 +0200
-@@ -0,0 +1,551 @@
-+;; AVR32 machine description file for Floating-Point instructions.
-+;; Copyright 2003-2006 Atmel Corporation.
-+;;
-+;; Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;; This file is part of GCC.
-+;;
-+;; This program is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2 of the License, or
-+;; (at your option) any later version.
-+;;
-+;; This program is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with this program; if not, write to the Free Software
-+;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+;;******************************************************************************
-+;; Automaton pipeline description for floating-point coprocessor insns
-+;;******************************************************************************
-+(define_cpu_unit "fid,fm1,fm2,fm3,fm4,fwb,fcmp,fcast" "avr32_ap")
-+
-+(define_insn_reservation "fmv_op" 1
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fmv"))
-+ "is,da,d,fid,fwb")
-+
-+(define_insn_reservation "fmul_op" 5
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fmul"))
-+ "is,da,d,fid,fm1,fm2,fm3,fm4,fwb")
-+
-+(define_insn_reservation "fcmps_op" 1
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fcmps"))
-+ "is,da,d,fid,fcmp")
-+
-+(define_insn_reservation "fcmpd_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fcmpd"))
-+ "is,da,d,fid*2,fcmp")
-+
-+(define_insn_reservation "fcast_op" 3
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fcast"))
-+ "is,da,d,fid,fcmp,fcast,fwb")
-+
-+(define_insn_reservation "fmvcpu_op" 2
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fmvcpu"))
-+ "is,da,d")
-+
-+(define_insn_reservation "fldd_op" 1
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fldd"))
-+ "is,da,d,fwb")
-+
-+(define_insn_reservation "flds_op" 1
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "flds"))
-+ "is,da,d,fwb")
-+
-+(define_insn_reservation "fsts_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fsts"))
-+ "is,da*2,d")
-+
-+(define_insn_reservation "fstd_op" 0
-+ (and (eq_attr "pipeline" "ap")
-+ (eq_attr "type" "fstd"))
-+ "is,da*2,d")
-+
-+
-+(define_insn "*movsf_fpcp"
-+ [(set (match_operand:SF 0 "nonimmediate_operand" "=f,f,r,f,m,r,r,r,m")
-+ (match_operand:SF 1 "general_operand" " f,r,f,m,f,r,G,m,r"))]
-+ "TARGET_HARD_FLOAT"
-+ "@
-+ fmov.s\t%0, %1
-+ fmov.s\t%0, %1
-+ fmov.s\t%0, %1
-+ fld.s\t%0, %1
-+ fst.s\t%0, %1
-+ mov\t%0, %1
-+ mov\t%0, %1
-+ ld.w\t%0, %1
-+ st.w\t%0, %1"
-+ [(set_attr "length" "4,4,4,4,4,2,4,4,4")
-+ (set_attr "type" "fmv,flds,fmvcpu,flds,fsts,alu,alu,load,store")])
-+
-+(define_insn_and_split "*movdf_fpcp"
-+ [(set (match_operand:DF 0 "nonimmediate_operand" "=f,f,r,f,m,r,r,m")
-+ (match_operand:DF 1 "general_operand" " f,r,f,m,f,r,m,r"))]
-+ "TARGET_HARD_FLOAT"
-+ "@
-+ fmov.d\t%0, %1
-+ fmov.d\t%0, %1
-+ fmov.d\t%0, %1
-+ fld.d\t%0, %1
-+ fst.d\t%0, %1
-+ mov\t%0, %1\;mov\t%m0, %m1
-+ ld.d\t%0, %1
-+ st.d\t%0, %1"
-+
-+ "TARGET_HARD_FLOAT
-+ && reload_completed
-+ && (REG_P(operands[0]) && (REGNO_REG_CLASS(REGNO(operands[0])) == GENERAL_REGS))
-+ && (REG_P(operands[1]) && (REGNO_REG_CLASS(REGNO(operands[1])) == GENERAL_REGS))"
-+ [(set (match_dup 0) (match_dup 1))
-+ (set (match_dup 2) (match_dup 3))]
-+ "
-+ {
-+ operands[2] = gen_highpart (SImode, operands[0]);
-+ operands[0] = gen_lowpart (SImode, operands[0]);
-+ operands[3] = gen_highpart(SImode, operands[1]);
-+ operands[1] = gen_lowpart(SImode, operands[1]);
-+ }
-+ "
-+
-+ [(set_attr "length" "4,4,4,4,4,4,4,4")
-+ (set_attr "type" "fmv,fldd,fmvcpu,fldd,fstd,alu2,load2,store2")])
-+
-+
-+(define_insn "mulsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmul.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "nmulsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f"))))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmul.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "")
-+ (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:SF 3 "avr32_fp_register_operand" "")
-+ (neg:SF (match_dup 0)))]
-+ "TARGET_HARD_FLOAT &&
-+ (peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[3]) == REGNO(operands[0])))"
-+ [(set (match_dup 3)
-+ (neg:SF (mult:SF (match_dup 1)
-+ (match_dup 2))))]
-+)
-+
-+
-+(define_insn "macsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (plus:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f"))
-+ (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmac.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "nmacsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (plus:SF (neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f")))
-+ (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmac.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "")
-+ (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:SF 3 "avr32_fp_register_operand" "")
-+ (minus:SF
-+ (match_dup 3)
-+ (match_dup 0)))]
-+ "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 3)
-+ (plus:SF (neg:SF (mult:SF (match_dup 1)
-+ (match_dup 2)))
-+ (match_dup 3)))]
-+)
-+
-+
-+(define_insn "msubacsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (minus:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f"))
-+ (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmsc.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "")
-+ (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:SF 3 "avr32_fp_register_operand" "")
-+ (minus:SF
-+ (match_dup 0)
-+ (match_dup 3)))]
-+ "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 3)
-+ (minus:SF (mult:SF (match_dup 1)
-+ (match_dup 2))
-+ (match_dup 3)))]
-+)
-+
-+(define_insn "nmsubacsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (minus:SF (neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f")))
-+ (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmsc.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+
-+
-+(define_insn "addsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (plus:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fadd.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "subsf3"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (minus:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fsub.s\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+
-+(define_insn "negsf2"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (neg:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fneg.s\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmv")])
-+
-+(define_insn "abssf2"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (abs:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fabs.s\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmv")])
-+
-+(define_insn "truncdfsf2"
-+ [(set (match_operand:SF 0 "avr32_fp_register_operand" "=f")
-+ (float_truncate:SF
-+ (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fcastd.s\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fcast")])
-+
-+(define_insn "extendsfdf2"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (float_extend:DF
-+ (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fcasts.d\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fcast")])
-+
-+(define_insn "muldf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmul.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "nmuldf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f"))))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmul.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "")
-+ (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:DF 3 "avr32_fp_register_operand" "")
-+ (neg:DF (match_dup 0)))]
-+ "TARGET_HARD_FLOAT &&
-+ (peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[3]) == REGNO(operands[0])))"
-+ [(set (match_dup 3)
-+ (neg:DF (mult:DF (match_dup 1)
-+ (match_dup 2))))]
-+)
-+
-+(define_insn "macdf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (plus:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f"))
-+ (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmac.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "msubacdf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (minus:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f"))
-+ (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fmsc.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "")
-+ (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:DF 3 "avr32_fp_register_operand" "")
-+ (minus:DF
-+ (match_dup 0)
-+ (match_dup 3)))]
-+ "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 3)
-+ (minus:DF (mult:DF (match_dup 1)
-+ (match_dup 2))
-+ (match_dup 3)))]
-+ )
-+
-+(define_insn "nmsubacdf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (minus:DF (neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f")))
-+ (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmsc.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "nmacdf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (plus:DF (neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f")))
-+ (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+ "TARGET_HARD_FLOAT"
-+ "fnmac.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "")
-+ (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+ (set (match_operand:DF 3 "avr32_fp_register_operand" "")
-+ (minus:DF
-+ (match_dup 3)
-+ (match_dup 0)))]
-+ "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+ [(set (match_dup 3)
-+ (plus:DF (neg:DF (mult:DF (match_dup 1)
-+ (match_dup 2)))
-+ (match_dup 3)))]
-+)
-+
-+(define_insn "adddf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (plus:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fadd.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "subdf3"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (minus:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fsub.d\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmul")])
-+
-+(define_insn "negdf2"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (neg:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fneg.d\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmv")])
-+
-+(define_insn "absdf2"
-+ [(set (match_operand:DF 0 "avr32_fp_register_operand" "=f")
-+ (abs:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ "fabs.d\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmv")])
-+
-+
-+(define_expand "cmpdf"
-+ [(set (cc0)
-+ (compare:DF
-+ (match_operand:DF 0 "general_operand" "")
-+ (match_operand:DF 1 "general_operand" "")))]
-+ "TARGET_HARD_FLOAT"
-+ "{
-+ rtx tmpreg;
-+ if ( !REG_P(operands[0]) )
-+ operands[0] = force_reg(DFmode, operands[0]);
-+
-+ if ( !REG_P(operands[1]) )
-+ operands[1] = force_reg(DFmode, operands[1]);
-+
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+
-+ emit_insn(gen_cmpdf_internal(operands[0], operands[1]));
-+
-+ tmpreg = gen_reg_rtx(SImode);
-+ emit_insn(gen_fpcc_to_reg(tmpreg));
-+ emit_insn(gen_reg_to_cc(tmpreg));
-+
-+ DONE;
-+ }"
-+)
-+
-+(define_insn "cmpdf_internal"
-+ [(set (reg:CC FPCC_REGNUM)
-+ (compare:CC
-+ (match_operand:DF 0 "avr32_fp_register_operand" "f")
-+ (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ {
-+ if (!rtx_equal_p(cc_prev_status.mdep.fpvalue, SET_SRC(PATTERN (insn))) )
-+ return "fcmp.d\t%0, %1";
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fcmpd")
-+ (set_attr "cc" "fpcompare")])
-+
-+(define_expand "cmpsf"
-+ [(set (cc0)
-+ (compare:SF
-+ (match_operand:SF 0 "general_operand" "")
-+ (match_operand:SF 1 "general_operand" "")))]
-+ "TARGET_HARD_FLOAT"
-+ "{
-+ rtx tmpreg;
-+ if ( !REG_P(operands[0]) )
-+ operands[0] = force_reg(SFmode, operands[0]);
-+
-+ if ( !REG_P(operands[1]) )
-+ operands[1] = force_reg(SFmode, operands[1]);
-+
-+ avr32_compare_op0 = operands[0];
-+ avr32_compare_op1 = operands[1];
-+
-+ emit_insn(gen_cmpsf_internal(operands[0], operands[1]));
-+
-+ tmpreg = gen_reg_rtx(SImode);
-+ emit_insn(gen_fpcc_to_reg(tmpreg));
-+ emit_insn(gen_reg_to_cc(tmpreg));
-+
-+ DONE;
-+ }"
-+)
-+
-+(define_insn "cmpsf_internal"
-+ [(set (reg:CC FPCC_REGNUM)
-+ (compare:CC
-+ (match_operand:SF 0 "avr32_fp_register_operand" "f")
-+ (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+ "TARGET_HARD_FLOAT"
-+ {
-+ if (!rtx_equal_p(cc_prev_status.mdep.fpvalue, SET_SRC(PATTERN (insn))) )
-+ return "fcmp.s\t%0, %1";
-+ return "";
-+ }
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fcmps")
-+ (set_attr "cc" "fpcompare")])
-+
-+(define_insn "fpcc_to_reg"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec:SI [(reg:CC FPCC_REGNUM)]
-+ UNSPEC_FPCC_TO_REG))]
-+ "TARGET_HARD_FLOAT"
-+ "fmov.s\t%0, fsr"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "fmvcpu")])
-+
-+(define_insn "reg_to_cc"
-+ [(set (cc0)
-+ (unspec:SI [(match_operand:SI 0 "register_operand" "r")]
-+ UNSPEC_REG_TO_CC))]
-+ "TARGET_HARD_FLOAT"
-+ "musfr\t%0"
-+ [(set_attr "length" "2")
-+ (set_attr "type" "alu")
-+ (set_attr "cc" "from_fpcc")])
-+
-+(define_insn "stm_fp"
-+ [(unspec [(match_operand 0 "register_operand" "r")
-+ (match_operand 1 "const_int_operand" "")
-+ (match_operand 2 "const_int_operand" "")]
-+ UNSPEC_STMFP)]
-+ "TARGET_HARD_FLOAT"
-+ {
-+ int cop_reglist = INTVAL(operands[1]);
-+
-+ if (INTVAL(operands[2]) != 0)
-+ return "stcm.w\tcp0, --%0, %C1";
-+ else
-+ return "stcm.w\tcp0, %0, %C1";
-+
-+ if ( cop_reglist & ~0xff ){
-+ operands[1] = GEN_INT(cop_reglist & ~0xff);
-+ if (INTVAL(operands[2]) != 0)
-+ return "stcm.d\tcp0, --%0, %D1";
-+ else
-+ return "stcm.d\tcp0, %0, %D1";
-+ }
-+ }
-+ [(set_attr "type" "fstm")
-+ (set_attr "length" "4")
-+ (set_attr "cc" "none")])
-Index: gcc-4.2.3/gcc/config/avr32/lib1funcs.S
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/lib1funcs.S 2008-05-21 13:45:54.173288052 +0200
-@@ -0,0 +1,2589 @@
-+
-+/* Adjust the unpacked double number if it is a subnormal number.
-+ The exponent and mantissa pair are stored
-+ in [mant_hi,mant_lo] and [exp]. A register with the correct sign bit in
-+ the MSB is passed in [sign]. Needs two scratch
-+ registers [scratch1] and [scratch2]. An adjusted and packed double float
-+ is present in [mant_hi,mant_lo] after macro has executed */
-+.macro adjust_subnormal_df exp, mant_lo, mant_hi, sign, scratch1, scratch2
-+ /* We have an exponent which is <=0 indicating a subnormal number
-+ As it should be stored as if the exponent was 1 (although the
-+ exponent field is all zeros to indicate a subnormal number)
-+ we have to shift down the mantissa to its correct position. */
-+ neg \exp
-+ sub \exp,-1 /* amount to shift down */
-+ cp.w \exp,54
-+ brlo 50f /* if more than 53 shift steps, the
-+ entire mantissa will disappear
-+ without any rounding to occur */
-+ mov \mant_hi, 0
-+ mov \mant_lo, 0
-+ rjmp 52f
-+50:
-+ sub \exp,-10 /* do the shift to position the
-+ mantissa at the same time
-+ note! this does not include the
-+ final 1 step shift to add the sign */
-+
-+ /* when shifting, save all shifted out bits in [scratch2]. we may need to
-+ look at them to make correct rounding. */
-+
-+ rsub \scratch1,\exp,32 /* get inverted shift count */
-+ cp.w \exp,32 /* handle shifts >= 32 separately */
-+ brhs 51f
-+
-+ /* small (<32) shift amount, both words are part of the shift */
-+ lsl \scratch2,\mant_lo,\scratch1 /* save bits to shift out from lsw*/
-+ lsl \scratch1,\mant_hi,\scratch1 /* get bits from msw destined for lsw*/
-+ lsr \mant_lo,\mant_lo,\exp /* shift down lsw */
-+ lsr \mant_hi,\mant_hi,\exp /* shift down msw */
-+ or \mant_hi,\scratch1 /* add bits from msw with prepared lsw */
-+ rjmp 50f
-+
-+ /* large (>=32) shift amount, only lsw will have bits left after shift.
-+ note that shift operations will use ((shift count) mod 32) so
-+ we do not need to subtract 32 from shift count. */
-+51:
-+ lsl \scratch2,\mant_hi,\scratch1 /* save bits to shift out from msw */
-+ or \scratch2,\mant_lo /* also save all bits from lsw */
-+ mov \mant_lo,\mant_hi /* msw -> lsw (i.e. "shift 32 first") */
-+ mov \mant_hi,0 /* clear msw */
-+ lsr \mant_lo,\mant_lo,\exp /* make rest of shift inside lsw */
-+
-+50:
-+ /* result is almost ready to return, except that least significant bit
-+ and the part we already shifted out may cause the result to be
-+ rounded */
-+ bld \mant_lo,0 /* get bit to be shifted out */
-+ brcc 51f /* if bit was 0, no rounding */
-+
-+ /* msb of part to remove is 1, so rounding depends on rest of bits */
-+ tst \scratch2,\scratch2 /* get shifted out tail */
-+ brne 50f /* if rest > 0, do round */
-+ bld \mant_lo,1 /* we have to look at lsb in result */
-+ brcc 51f /* if lsb is 0, don't round */
-+
-+50:
-+ /* subnormal result requires rounding
-+ rounding may cause subnormal to become smallest normal number
-+ luckily, smallest normal number has exactly the representation
-+ we got by rippling a one bit up from mantissa into exponent field. */
-+ sub \mant_lo,-1
-+ subcc \mant_hi,-1
-+
-+51:
-+ /* shift and return packed double with correct sign */
-+ rol \sign
-+ ror \mant_hi
-+ ror \mant_lo
-+52:
-+.endm
-+
-+
-+/* Adjust subnormal single float number with exponent [exp]
-+ and mantissa [mant] and round. */
-+.macro adjust_subnormal_sf sf, exp, mant, sign, scratch
-+ /* subnormal number */
-+ rsub \exp,\exp, 1 /* shift amount */
-+ cp.w \exp, 25
-+ movhs \mant, 0
-+ brhs 90f /* Return zero */
-+ rsub \scratch, \exp, 32
-+ lsl \scratch, \mant,\scratch/* Check if there are any bits set
-+ in the bits discarded in the mantissa */
-+ srne \scratch /* If so set the lsb of the shifted mantissa */
-+ lsr \mant,\mant,\exp /* Shift the mantissa */
-+ or \mant, \scratch /* Round lsb if any bits were shifted out */
-+ /* Rounding : For explaination, see round_sf. */
-+ mov \scratch, 0x7f /* Set rounding constant */
-+ bld \mant, 8
-+ subeq \scratch, -1 /* For odd numbers use rounding constant 0x80 */
-+ add \mant, \scratch /* Add rounding constant to mantissa */
-+ /* We can't overflow because mantissa is at least shifted one position
-+ to the right so the implicit bit is zero. We can however get the implicit
-+ bit set after rounding which means that we have the lowest normal number
-+ but this is ok since this bit has the same position as the LSB of the
-+ exponent */
-+ lsr \sf, \mant, 7
-+ /* Rotate in sign */
-+ lsl \sign, 1
-+ ror \sf
-+90:
-+.endm
-+
-+
-+/* Round the unpacked df number with exponent [exp] and
-+ mantissa [mant_hi, mant_lo]. Uses scratch register
-+ [scratch] */
-+.macro round_df exp, mant_lo, mant_hi, scratch
-+ mov \scratch, 0x3ff /* Rounding constant */
-+ bld \mant_lo,11 /* Check if lsb in the final result is
-+ set */
-+ subeq \scratch, -1 /* Adjust rounding constant to 0x400
-+ if rounding 0.5 upwards */
-+ add \mant_lo, \scratch /* Round */
-+ acr \mant_hi /* If overflowing we know that
-+ we have all zeros in the bits not
-+ scaled out so we can leave them
-+ but we must increase the exponent with
-+ two since we had an implicit bit
-+ which is lost + the extra overflow bit */
-+ subcs \exp, -2 /* Update exponent */
-+.endm
-+
-+/* Round single float number stored in [mant] and [exp] */
-+.macro round_sf exp, mant, scratch
-+ /* Round:
-+ For 0.5 we round to nearest even integer
-+ for all other cases we round to nearest integer.
-+ This means that if the digit left of the "point" (.)
-+ is 1 we can add 0x80 to the mantissa since the
-+ corner case 0x180 will round up to 0x200. If the
-+ digit left of the "point" is 0 we will have to
-+ add 0x7f since this will give 0xff and hence a
-+ truncation/rounding downwards for the corner
-+ case when the 9 lowest bits are 0x080 */
-+ mov \scratch, 0x7f /* Set rounding constant */
-+ /* Check if the mantissa is even or odd */
-+ bld \mant, 8
-+ subeq \scratch, -1 /* Rounding constant should be 0x80 */
-+ add \mant, \scratch
-+ subcs \exp, -2 /* Adjust exponent if we overflowed */
-+.endm
-+
-+/* Scale mantissa [mant_hi, mant_lo] with amount [shift_count].
-+ Uses scratch registers [scratch1] and [scratch2] */
-+.macro scale_df shift_count, mant_lo, mant_hi, scratch1, scratch2
-+ /* Scale [mant_hi, mant_lo] with shift_amount.
-+ Must not forget the sticky bits we intend to shift out. */
-+
-+ rsub \scratch1,\shift_count,32/* get (32 - shift count)
-+ (if shift count > 32 we get a
-+ negative value, but that will
-+ work as well in the code below.) */
-+
-+ cp.w \shift_count,32 /* handle shifts >= 32 separately */
-+ brhs 70f
-+
-+ /* small (<32) shift amount, both words are part of the shift
-+ first remember whether part that is lost contains any 1 bits ... */
-+ lsl \scratch2,\mant_lo,\scratch1 /*shift away bits that are part of
-+ final mantissa. only part that goes
-+ to scratch2 are bits that will be lost */
-+
-+ /* ... and now to the actual shift */
-+ lsl \scratch1,\mant_hi,\scratch1 /* get bits from msw destined for lsw*/
-+ lsr \mant_lo,\mant_lo,\shift_count /* shift down lsw of mantissa */
-+ lsr \mant_hi,\mant_hi,\shift_count /* shift down msw of mantissa */
-+ or \mant_lo,\scratch1 /* combine these bits with prepared lsw*/
-+ rjmp 71f
-+
-+ /* large (>=32) shift amount, only lsw will have bits left after shift.
-+ note that shift operations will use ((shift count) mod 32) so
-+ we do not need to subtract 32 from shift count. */
-+70:
-+ /* first remember whether part that is lost contains any 1 bits ... */
-+ lsl \scratch2,\mant_hi,\scratch1 /* save all lost bits from msw */
-+ or \scratch2,\mant_lo /* also save lost bits (all) from lsw
-+ now scratch2<>0 if we lose any bits */
-+
-+ /* ... and now to the actual shift */
-+ mov \mant_lo,\mant_hi /* msw -> lsw (i.e. "shift 32 first")*/
-+ mov \mant_hi,0 /* clear msw */
-+ lsr \mant_lo,\mant_lo,\shift_count /* make rest of shift inside lsw*/
-+
-+71:
-+ cp.w \scratch2,0 /* if any '1' bit in part we lost ...*/
-+ breq 70f
-+
-+ sbr \mant_lo,0 /* ... we need to set sticky bit*/
-+70:
-+.endm
-+
-+/* Unpack exponent and mantissa from the double number
-+ stored in [df_hi,df_lo]. The exponent is stored in [exp]
-+ while the mantissa is stored in [df_hi,df_lo]. */
-+
-+.macro unpack_df exp, df_lo, df_hi
-+ lsr \exp, \df_hi,21 /* Extract exponent */
-+ lsl \df_hi,10 /* Get mantissa */
-+ or \df_hi,\df_hi,\df_lo>>21
-+ lsl \df_lo,11
-+
-+ neg \exp /* Fix implicit bit */
-+ bst \df_hi,31
-+ subeq \exp,1
-+ neg \exp /* negate back exponent */
-+ .endm
-+
-+/* Unpack exponent and mantissa from the single float number
-+ stored in [sf]. The exponent is stored in [exp]
-+ while the mantissa is stored in [sf]. */
-+.macro unpack_sf exp, sf
-+ lsr \exp, \sf, 24
-+ brne 80f
-+ /* Fix subnormal number */
-+ lsl \sf,7
-+ clz \exp,\sf
-+ lsl \sf,\sf,\exp
-+ rsub \exp,\exp,1
-+ rjmp 81f
-+80:
-+ lsl \sf,7
-+ sbr \sf, 31 /*Implicit bit*/
-+81:
-+.endm
-+
-+
-+
-+/* Pack a single float number stored in [mant] and [exp]
-+ into a single float number in [sf] */
-+.macro pack_sf sf, exp, mant
-+ bld \mant,31 /* implicit bit to z */
-+ subne \exp,1 /* if subnormal (implicit bit 0)
-+ adjust exponent to storage format */
-+
-+ lsr \sf, \mant, 7
-+ bfins \sf, \exp, 24, 8
-+.endm
-+
-+/* Pack exponent [exp] and mantissa [mant_hi, mant_lo]
-+ into [df_hi, df_lo]. [df_hi] is shifted
-+ one bit up so the sign bit can be shifted into it */
-+
-+.macro pack_df exp, mant_lo, mant_hi, df_lo, df_hi
-+ bld \mant_hi,31 /* implicit bit to z */
-+ subne \exp,1 /* if subnormal (implicit bit 0)
-+ adjust exponent to storage format */
-+
-+ lsr \mant_lo,11 /* shift back lsw */
-+ or \df_lo,\mant_lo,\mant_hi<<21 /* combine with low bits from msw */
-+ lsl \mant_hi,1 /* get rid of implicit bit */
-+ lsr \mant_hi,11 /* shift back msw except for one step*/
-+ or \df_hi,\mant_hi,\exp<<21 /* combine msw with exponent */
-+.endm
-+
-+/* Normalize single float number stored in [mant] and [exp]
-+ using scratch register [scratch] */
-+.macro normalize_sf exp, mant, scratch
-+ /* Adjust exponent and mantissa */
-+ clz \scratch, \mant
-+ sub \exp, \scratch
-+ lsl \mant, \mant, \scratch
-+.endm
-+
-+/* Normalize the exponent and mantissa pair stored
-+ in [mant_hi,mant_lo] and [exp]. Needs two scratch
-+ registers [scratch1] and [scratch2]. */
-+.macro normalize_df exp, mant_lo, mant_hi, scratch1, scratch2
-+ clz \scratch1,\mant_hi /* Check if we have zeros in high bits */
-+ breq 80f /* No need for scaling if no zeros in high bits */
-+ brcs 81f /* Check for all zeros */
-+
-+ /* shift amount is smaller than 32, and involves both msw and lsw*/
-+ rsub \scratch2,\scratch1,32 /* shift mantissa */
-+ lsl \mant_hi,\mant_hi,\scratch1
-+ lsr \scratch2,\mant_lo,\scratch2
-+ or \mant_hi,\scratch2
-+ lsl \mant_lo,\mant_lo,\scratch1
-+ sub \exp,\scratch1 /* adjust exponent */
-+ rjmp 80f /* Finished */
-+81:
-+ /* shift amount is greater than 32 */
-+ clz \scratch1,\mant_lo /* shift mantissa */
-+ movcs \scratch1, 0
-+ subcc \scratch1,-32
-+ mov \mant_hi,\mant_lo
-+ lsl \mant_hi,\mant_hi,\scratch1
-+ mov \mant_lo,0
-+ sub \exp,\scratch1 /* adjust exponent */
-+80:
-+.endm
-+
-+
-+/* Fast but approximate multiply of two 64-bit numbers to give a 64 bit result.
-+ The multiplication of [al]x[bl] is discarded.
-+ Operands in [ah], [al], [bh], [bl].
-+ Scratch registers in [sh], [sl].
-+ Returns results in registers [rh], [rl].*/
-+.macro mul_approx_df ah, al, bh, bl, rh, rl, sh, sl
-+ mulu.d \sl, \ah, \bl
-+ macu.d \sl, \al, \bh
-+ mulu.d \rl, \ah, \bh
-+ add \rl, \sh
-+ acr \rh
-+.endm
-+
-+
-+
-+
-+#ifdef L_avr32_f64_mul
-+ .align 2
-+ .global __avr32_f64_mul
-+ .type __avr32_f64_mul,@function
-+
-+
-+__avr32_f64_mul:
-+ or r12, r10, r11 << 1
-+ breq __avr32_f64_mul_op1_zero
-+
-+ stm --sp, r5,r6,r7,lr
-+ /* op1 in {r11,r10}*/
-+ /* op2 in {r9,r8}*/
-+ eor lr, r11, r9 /* MSB(lr) = Sign(op1) ^ Sign(op2) */
-+
-+ /* Unpack op1 */
-+ /* exp: r7 */
-+ /* sf: r11, r10 */
-+ lsr r7, r11, 20 /* Extract exponent */
-+
-+ lsl r11, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r11, r11, r10>>21
-+ lsl r10, 11
-+ sbr r11, 31 /* Insert implicit bit */
-+
-+ cbr r7, 11 /* Clear sign bit */
-+ /* Check if normalization is needed */
-+ breq __avr32_f64_mul_op1_subnormal /*If number is subnormal, normalize it */
-+
-+22:
-+ /* Unpack op2 */
-+ /* exp: r6 */
-+ /* sf: r9, r8 */
-+ lsr r6, r9, 20 /* Extract exponent */
-+
-+ lsl r9, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>21
-+ lsl r8, 11
-+ sbr r9, 31 /* Insert implicit bit */
-+
-+ cbr r6, 11 /* Clear sign bit */
-+ /* Check if normalization is needed */
-+ breq __avr32_f64_mul_op2_subnormal /*If number is subnormal, normalize it */
-+23:
-+
-+ /* Check if any operands are NaN or INF */
-+ cp r7, 0x7ff
-+ breq __avr32_f64_mul_op_nan_or_inf /* Check op1 for NaN or Inf */
-+ cp r6, 0x7ff
-+ breq __avr32_f64_mul_op_nan_or_inf /* Check op2 for NaN or Inf */
-+
-+
-+ /* Calculate new exponent in r12*/
-+ add r12, r7, r6
-+ sub r12, (1023-1)
-+
-+ /* Do the multiplication using approximate calculation.
-+ Place result in r11, r10. Use r7, r6 as scratch registers */
-+ mul_approx_df r11 /*ah*/, r10 /*al*/, r9 /*bh*/, r8 /*bl*/, r11 /*rh*/, r10 /*rl*/, r7 /*sh*/, r6 /*sl*/
-+
-+ /* Check if result is zero */
-+ breq __avr32_f64_mul_res_subnormal
-+
-+ /* Adjust exponent and mantissa */
-+ /* [r12]:exp, [r11, r10]:mant, [r9,r8,r7]:scratch*/
-+ /* Mantissa may be of the format 0.xxxx or 1.xxxx. */
-+ /* In the first case, shift one pos to left.*/
-+ sub r9, r12, 1
-+ mov r8, r11
-+ lsl r7, r10, 1
-+ rol r8
-+ bld r11, 31
-+ movne r12, r9
-+ movne r11, r8
-+ movne r10, r7
-+ cp r12, 0
-+ breq __avr32_f64_mul_res_subnormal /*Result was subnormal. Flush-to-zero and return zero*/
-+
-+ /* Check for Inf. */
-+ cp.w r12, 0x7ff
-+ brge __avr32_f64_mul_res_inf
-+
-+ /* Result was not subnormal. Perform rounding. */
-+ /* Because of performance optimization, we have no sticky bit, */
-+ /* so round-to-even won't work as specified in the IEEE standard.*/
-+ /* [r12]:exp, [r11, r10]:mant */
-+ /* Mantissa is in 0.64 format. Round by adding 1<<(64-(52+2))=1<<10*/
-+ /* That is, 1 in the MSB of the part that will be discarded in final packing.*/
-+ mov r9, (1<<10)
-+ add r10, r9
-+ acr r11
-+ /* Adjust exponent if we overflowed.*/
-+ subcs r12, -1
-+
-+
-+ /* Pack final result*/
-+ /* Input: [r12]:exp, [r11, r10]:mant */
-+ /* Result in [r11,r10] */
-+ /* Insert mantissa */
-+ cbr r11, 31 /*Clear implicit bit*/
-+ lsr r10, 11
-+ or r10, r10, r11<<21
-+ lsr r11, 11
-+ /* Insert exponent and sign bit*/
-+ or r11, r11, r12<<20
-+ bld lr, 31
-+ bst r11, 31
-+
-+ /* Return result in [r11,r10] */
-+ ldm sp++, r5, r6, r7,pc
-+
-+
-+__avr32_f64_mul_op1_subnormal:
-+ cbr r11, 31 /* Clear implicit bit. */
-+ normalize_df r7 /*exp*/, r10, r11 /*Mantissa*/, r5, r12 /*scratch*/
-+ rjmp 22b
-+
-+__avr32_f64_mul_op2_subnormal:
-+ cbr r9, 31 /* Clear implicit bit. */
-+ normalize_df r6 /*exp*/, r8, r9 /*Mantissa*/, r5, r12 /*scratch*/
-+ rjmp 23b
-+
-+
-+__avr32_f64_mul_op_nan_or_inf:
-+ /* Same code for OP1 and OP2*/
-+ /* Since we are here, at least one of the OPs were NaN or INF*/
-+ /* Shift out implicit bit of both operands' mantissa */
-+ lsl r11, 1
-+ lsl r9, 1
-+ /* Merge the regs in each operand to check for zero*/
-+ or r11, r10 /* op1 */
-+ or r9, r8 /* op2 */
-+ /* Check if op1 is NaN or INF */
-+ cp r7, 0x7ff
-+ brne __avr32_f64_mul_op1_not_naninf
-+ /* op1 was NaN or INF.*/
-+ cp r11, 0
-+ brne __avr32_f64_mul_res_nan /* op1 was NaN. Result will be NaN*/
-+ /*op1 was INF. check if op2 is NaN or INF*/
-+ cp r6, 0x7ff
-+ brne __avr32_f64_mul_res_inf /*op1 was INF, op2 was neither NaN nor INF*/
-+ /* op1 is INF, op2 is either NaN or INF*/
-+ cp r9, 0
-+ breq __avr32_f64_mul_res_inf /*op2 was also INF*/
-+ rjmp __avr32_f64_mul_res_nan /*op2 was NaN*/
-+
-+__avr32_f64_mul_op1_not_naninf:
-+ /* op1 was not NaN nor INF. Then op2 must be NaN or INF*/
-+ cp r9, 0
-+ breq __avr32_f64_mul_res_inf /*op2 was INF, return INF*/
-+ rjmp __avr32_f64_mul_res_nan /*else return NaN*/
-+
-+__avr32_f64_mul_res_subnormal:/* Multiply result was subnormal. Return zero. */
-+ mov r11, lr /*Get correct sign*/
-+ andh r11, 0x8000, COH
-+ mov r10, 0
-+ ldm sp++, r5, r6, r7,pc
-+
-+__avr32_f64_mul_res_nan: /* Return NaN. */
-+ mov r11, -1
-+ mov r10, -1
-+ ldm sp++, r5, r6, r7,pc
-+
-+__avr32_f64_mul_res_inf: /* Return INF. */
-+ mov r11, 0
-+ orh r11, 0x7ff0
-+ bld lr, 31
-+ bst r11, 31
-+ mov r10, 0
-+ ldm sp++, r5, r6, r7,pc
-+
-+__avr32_f64_mul_op1_zero:
-+ /* Get sign */
-+ eor r11, r11, r9
-+ andh r11, 0x8000, COH
-+ /* Check if op2 is Inf or NaN. */
-+ bfextu r12, r9, 20, 11
-+ cp.w r12, 0x7ff
-+ retne r12 /* Return 0.0 */
-+ /* Return NaN */
-+ mov r10, -1
-+ mov r11, -1
-+ ret r12
-+
-+
-+
-+#endif
-+
-+
-+#if defined(L_avr32_f64_addsub) || defined(L_avr32_f64_addsub_fast)
-+ .align 2
-+
-+__avr32_f64_sub_from_add:
-+ /* Switch sign on op2 */
-+ eorh r9, 0x8000
-+
-+#if defined(L_avr32_f64_addsub_fast)
-+ .global __avr32_f64_sub_fast
-+ .type __avr32_f64_sub_fast,@function
-+__avr32_f64_sub_fast:
-+#else
-+ .global __avr32_f64_sub
-+ .type __avr32_f64_sub,@function
-+__avr32_f64_sub:
-+#endif
-+
-+ /* op1 in {r11,r10}*/
-+ /* op2 in {r9,r8}*/
-+
-+#if defined(L_avr32_f64_addsub_fast)
-+ /* If op2 is zero just return op1 */
-+ or r12, r8, r9 << 1
-+ reteq r12
-+#endif
-+
-+ /* Check signs */
-+ eor r12, r11, r9
-+ /* Different signs, use addition. */
-+ brmi __avr32_f64_add_from_sub
-+
-+ stm --sp, r5, r6, r7, lr
-+
-+ /* Get sign of op1 into r12 */
-+ mov r12, r11
-+ andh r12, 0x8000, COH
-+
-+ /* Remove sign from operands */
-+ cbr r11, 31
-+ cbr r9, 31
-+
-+ /* Put the number with the largest exponent in [r11, r10]
-+ and the number with the smallest exponent in [r9, r8] */
-+ cp r11, r9
-+ brhs 1f /* Skip swap if operands already correctly ordered*/
-+ /* Operands were not correctly ordered, swap them*/
-+ mov r7, r11
-+ mov r11, r9
-+ mov r9, r7
-+ mov r7, r10
-+ mov r10, r8
-+ mov r8, r7
-+ eorh r12, 0x8000 /* Invert sign in r12*/
-+1:
-+ /* Unpack largest operand - opH */
-+ /* exp: r7 */
-+ /* sf: r11, r10 */
-+ lsr r7, r11, 20 /* Extract exponent */
-+ cbr r7, 11 /* Clear sign bit */
-+ lsl r11, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r11, r11, r10>>21
-+ lsl r10, 11
-+ sbr r11, 31 /* Insert implicit bit */
-+
-+
-+ /* Unpack smallest operand - opL */
-+ /* exp: r6 */
-+ /* sf: r9, r8 */
-+ lsr r6, r9, 20 /* Extract exponent */
-+ cbr r6, 11 /* Clear sign bit */
-+ breq __avr32_f64_sub_opL_subnormal /* If either zero or subnormal */
-+ lsl r9, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>21
-+ lsl r8, 11
-+ sbr r9, 31 /* Insert implicit bit */
-+
-+
-+__avr32_f64_sub_opL_subnormal_done:
-+ /* opH is NaN or Inf. */
-+ cp.w r7, 0x7ff
-+ breq __avr32_f64_sub_opH_nan_or_inf
-+
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r6, r7
-+ breq __avr32_f64_sub_shift_done /* No need to shift, exponents are equal*/
-+
-+ /* Scale mantissa [r9, r8] with amount [r6].
-+ Uses scratch registers [r5] and [lr].
-+ In IEEE mode:Must not forget the sticky bits we intend to shift out. */
-+
-+ rsub r5,r6,32 /* get (32 - shift count)
-+ (if shift count > 32 we get a
-+ negative value, but that will
-+ work as well in the code below.) */
-+
-+ cp.w r6,32 /* handle shifts >= 32 separately */
-+ brhs __avr32_f64_sub_longshift
-+
-+ /* small (<32) shift amount, both words are part of the shift
-+ first remember whether part that is lost contains any 1 bits ... */
-+ lsl lr,r8,r5 /* shift away bits that are part of
-+ final mantissa. only part that goes
-+ to lr are bits that will be lost */
-+
-+ /* ... and now to the actual shift */
-+ lsl r5,r9,r5 /* get bits from msw destined for lsw*/
-+ lsr r8,r8,r6 /* shift down lsw of mantissa */
-+ lsr r9,r9,r6 /* shift down msw of mantissa */
-+ or r8,r5 /* combine these bits with prepared lsw*/
-+#if defined(L_avr32_f64_addsub)
-+ cp.w lr,0 /* if any '1' bit in part we lost ...*/
-+ srne lr
-+ or r8, lr /* ... we need to set sticky bit*/
-+#endif
-+
-+__avr32_f64_sub_shift_done:
-+ /* Now subtract the mantissas. */
-+ sub r10, r8
-+ sbc r11, r11, r9
-+
-+ /* Normalize the exponent and mantissa pair stored in
-+ [r11,r10] and exponent in [r7]. Needs two scratch registers [r6] and [lr]. */
-+ clz r6,r11 /* Check if we have zeros in high bits */
-+ breq __avr32_f64_sub_longnormalize_done /* No need for scaling if no zeros in high bits */
-+ brcs __avr32_f64_sub_longnormalize
-+
-+ /* shift amount is smaller than 32, and involves both msw and lsw*/
-+ rsub lr,r6,32 /* shift mantissa */
-+ lsl r11,r11,r6
-+ lsr lr,r10,lr
-+ or r11,lr
-+ lsl r10,r10,r6
-+ sub r7,r6 /* adjust exponent */
-+ brle __avr32_f64_sub_subnormal_result
-+
-+__avr32_f64_sub_longnormalize_done:
-+
-+#if defined(L_avr32_f64_addsub)
-+ /* Insert the bits we will remove from the mantissa r9[31:21] */
-+ lsl r9, r10, (32 - 11)
-+#else
-+ /* Keep the last bit shifted out. */
-+ bfextu r9, r10, 10, 1
-+#endif
-+
-+ /* Pack final result*/
-+ /* Input: [r7]:exp, [r11, r10]:mant, [r12]:sign in MSB */
-+ /* Result in [r11,r10] */
-+ /* Insert mantissa */
-+ cbr r11, 31 /*Clear implicit bit*/
-+ lsr r10, 11
-+ or r10, r10, r11<<21
-+ lsr r11, 11
-+ /* Insert exponent and sign bit*/
-+ or r11, r11, r7<<20
-+ bld r12, 31
-+ bst r11, 31
-+
-+ /* Round */
-+__avr32_f64_sub_round:
-+#if defined(L_avr32_f64_addsub)
-+ mov r7, 0
-+ sbr r7, 31
-+ bld r10, 0
-+ subne r7, -1
-+
-+ cp.w r9, r7
-+ srhs r9
-+#endif
-+ add r10, r9
-+ acr r11
-+
-+ /* Return result in [r11,r10] */
-+ ldm sp++, r5, r6, r7,pc
-+
-+
-+
-+__avr32_f64_sub_opL_subnormal:
-+ /* Extract the of mantissa */
-+ lsl r9, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>21
-+ lsl r8, 11
-+
-+ /* Set exponent to 1 if we do not have a zero. */
-+ or lr, r9, r8
-+ movne r6,1
-+
-+ /* Check if opH is also subnormal. If so, clear implicit bit in r11*/
-+ rsub lr, r7, 0
-+ moveq r7,1
-+ bst r11, 31
-+
-+ /* Check if op1 is zero, if so set exponent to 0. */
-+ or lr, r11, r10
-+ moveq r7,0
-+
-+ rjmp __avr32_f64_sub_opL_subnormal_done
-+
-+__avr32_f64_sub_opH_nan_or_inf:
-+ /* Check if opH is NaN, if so return NaN */
-+ cbr r11, 31
-+ or lr, r11, r10
-+ brne __avr32_f64_sub_return_nan
-+
-+ /* opH is Inf. */
-+ /* Check if opL is Inf. or NaN */
-+ cp.w r6, 0x7ff
-+ breq __avr32_f64_sub_opL_nan_or_inf
-+ ldm sp++, r5, r6, r7, pc/* opL not Inf or NaN, return opH */
-+__avr32_f64_sub_opL_nan_or_inf:
-+ cbr r9, 31
-+ or lr, r9, r8
-+ brne __avr32_f64_sub_return_nan
-+ mov r10, 0 /* Generate Inf in r11, r10 */
-+ mov r11, 0
-+ orh r11, 0x7ff0
-+ ldm sp++, r5, r6, r7, pc/* opL Inf, return Inf */
-+__avr32_f64_sub_return_nan:
-+ mov r10, -1 /* Generate NaN in r11, r10 */
-+ mov r11, -1
-+ ldm sp++, r5, r6, r7, pc/* opL Inf or NaN, return NaN */
-+
-+
-+__avr32_f64_sub_subnormal_result:
-+ /* Just flush subnormals to zero. */
-+ mov r10, 0
-+ mov r11, 0
-+ ldm sp++, r5, r6, r7, pc
-+
-+
-+__avr32_f64_sub_longshift:
-+ /* large (>=32) shift amount, only lsw will have bits left after shift.
-+ note that shift operations will use ((shift count=r6) mod 32) so
-+ we do not need to subtract 32 from shift count. */
-+ /* Saturate the shift amount to 63. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r6 >> 0, 6
-+#if defined(L_avr32_f64_addsub)
-+ /* first remember whether part that is lost contains any 1 bits ... */
-+ lsl lr,r9,r5 /* save all lost bits from msw */
-+ or lr,r8 /* also save lost bits (all) from lsw
-+ now lr != 0 if we lose any bits */
-+#endif
-+ /* ... and now to the actual shift */
-+ mov r8,r9 /* msw -> lsw (i.e. "shift 32 first")*/
-+ mov r9,0 /* clear msw */
-+ lsr r8,r8,r6 /* make rest of shift inside lsw*/
-+#if defined(L_avr32_f64_addsub)
-+ cp.w lr,0 /* if any '1' bit in part we lost ...*/
-+ sreq lr
-+ or r8, lr /* ... we need to set sticky bit*/
-+#endif
-+ rjmp __avr32_f64_sub_shift_done
-+
-+__avr32_f64_sub_longnormalize:
-+ /* shift amount is greater than 32 */
-+ clz r6,r10 /* shift mantissa */
-+ /* If the resulting mantissa is zero the result is
-+ zero so force exponent to zero. */
-+ movcs r7, 0
-+ movcs r6, 0
-+ subcc r6,-32
-+ mov r11,r10
-+ lsl r11,r11,r6
-+ mov r10,0
-+ sub r7,r6 /* adjust exponent */
-+ brle __avr32_f64_sub_subnormal_result
-+ rjmp __avr32_f64_sub_longnormalize_done
-+
-+
-+
-+ .align 2
-+__avr32_f64_add_from_sub:
-+ /* Switch sign on op2 */
-+ eorh r9, 0x8000
-+
-+#if defined(L_avr32_f64_addsub_fast)
-+ .global __avr32_f64_add_fast
-+ .type __avr32_f64_add_fast,@function
-+__avr32_f64_add_fast:
-+#else
-+ .global __avr32_f64_add
-+ .type __avr32_f64_add,@function
-+__avr32_f64_add:
-+#endif
-+
-+ /* op1 in {r11,r10}*/
-+ /* op2 in {r9,r8}*/
-+
-+#if defined(L_avr32_f64_addsub_fast)
-+ /* If op2 is zero just return op1 */
-+ or r12, r8, r9 << 1
-+ reteq r12
-+#endif
-+
-+ /* Check signs */
-+ eor r12, r11, r9
-+ /* Different signs, use subtraction. */
-+ brmi __avr32_f64_sub_from_add
-+
-+ stm --sp, r5, r6, r7, lr
-+
-+ /* Get sign of op1 into r12 */
-+ mov r12, r11
-+ andh r12, 0x8000, COH
-+
-+ /* Remove sign from operands */
-+ cbr r11, 31
-+ cbr r9, 31
-+
-+ /* Put the number with the largest exponent in [r11, r10]
-+ and the number with the smallest exponent in [r9, r8] */
-+ cp r11, r9
-+ brhs 1f /* Skip swap if operands already correctly ordered*/
-+ /* Operands were not correctly ordered, swap them*/
-+ mov r7, r11
-+ mov r11, r9
-+ mov r9, r7
-+ mov r7, r10
-+ mov r10, r8
-+ mov r8, r7
-+1:
-+ /* Unpack largest operand - opH */
-+ /* exp: r7 */
-+ /* sf: r11, r10 */
-+ lsr r7, r11, 20 /* Extract exponent */
-+ cbr r7, 11 /* Clear sign bit */
-+ lsl r11, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r11, r11, r10>>21
-+ lsl r10, 11
-+ sbr r11, 31 /* Insert implicit bit */
-+
-+
-+ /* Unpack smallest operand - opL */
-+ /* exp: r6 */
-+ /* sf: r9, r8 */
-+ lsr r6, r9, 20 /* Extract exponent */
-+ cbr r6, 11 /* Clear sign bit */
-+ breq __avr32_f64_add_opL_subnormal /* If either zero or subnormal */
-+ lsl r9, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>21
-+ lsl r8, 11
-+ sbr r9, 31 /* Insert implicit bit */
-+
-+
-+__avr32_f64_add_opL_subnormal_done:
-+ /* opH is NaN or Inf. */
-+ cp.w r7, 0x7ff
-+ breq __avr32_f64_add_opH_nan_or_inf
-+
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r6, r7
-+ breq __avr32_f64_add_shift_done /* No need to shift, exponents are equal*/
-+
-+ /* Scale mantissa [r9, r8] with amount [r6].
-+ Uses scratch registers [r5] and [lr].
-+ In IEEE mode:Must not forget the sticky bits we intend to shift out. */
-+ rsub r5,r6,32 /* get (32 - shift count)
-+ (if shift count > 32 we get a
-+ negative value, but that will
-+ work as well in the code below.) */
-+
-+ cp.w r6,32 /* handle shifts >= 32 separately */
-+ brhs __avr32_f64_add_longshift
-+
-+ /* small (<32) shift amount, both words are part of the shift
-+ first remember whether part that is lost contains any 1 bits ... */
-+ lsl lr,r8,r5 /* shift away bits that are part of
-+ final mantissa. only part that goes
-+ to lr are bits that will be lost */
-+
-+ /* ... and now to the actual shift */
-+ lsl r5,r9,r5 /* get bits from msw destined for lsw*/
-+ lsr r8,r8,r6 /* shift down lsw of mantissa */
-+ lsr r9,r9,r6 /* shift down msw of mantissa */
-+ or r8,r5 /* combine these bits with prepared lsw*/
-+#if defined(L_avr32_f64_addsub)
-+ cp.w lr,0 /* if any '1' bit in part we lost ...*/
-+ srne lr
-+ or r8, lr /* ... we need to set sticky bit*/
-+#endif
-+
-+__avr32_f64_add_shift_done:
-+ /* Now add the mantissas. */
-+ add r10, r8
-+ adc r11, r11, r9
-+
-+ /* Check if we overflowed. */
-+ brcs __avr32_f64_add_res_of
-+
-+__avr32_f64_add_res_of_done:
-+
-+#if defined(L_avr32_f64_addsub)
-+ /* Insert the bits we will remove from the mantissa r9[31:21] */
-+ lsl r9, r10, (32 - 11)
-+#else
-+ /* Keep the last bit shifted out. */
-+ bfextu r9, r10, 10, 1
-+#endif
-+
-+ /* Pack final result*/
-+ /* Input: [r7]:exp, [r11, r10]:mant, [r12]:sign in MSB */
-+ /* Result in [r11,r10] */
-+ /* Insert mantissa */
-+ cbr r11, 31 /*Clear implicit bit*/
-+ lsr r10, 11
-+ or r10, r10, r11<<21
-+ lsr r11, 11
-+ /* Insert exponent and sign bit*/
-+ or r11, r11, r7<<20
-+ bld r12, 31
-+ bst r11, 31
-+
-+ /* Round */
-+__avr32_f64_add_round:
-+#if defined(L_avr32_f64_addsub)
-+ mov r7, 0
-+ sbr r7, 31
-+ bld r10, 0
-+ subne r7, -1
-+
-+ cp.w r9, r7
-+ srhs r9
-+#endif
-+ add r10, r9
-+ acr r11
-+
-+ /* Return result in [r11,r10] */
-+ ldm sp++, r5, r6, r7,pc
-+
-+
-+
-+__avr32_f64_add_opL_subnormal:
-+ /* Extract the of mantissa */
-+ lsl r9, 11 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>21
-+ lsl r8, 11
-+
-+ /* Set exponent to 1 if we do not have a zero. */
-+ or lr, r9, r8
-+ movne r6,1
-+
-+ /* Check if opH is also subnormal. If so, clear implicit bit in r11*/
-+ rsub lr, r7, 0
-+ moveq r7,1
-+ bst r11, 31
-+
-+ /* Check if op1 is zero, if so set exponent to 0. */
-+ or lr, r11, r10
-+ moveq r7,0
-+
-+ rjmp __avr32_f64_add_opL_subnormal_done
-+
-+__avr32_f64_add_opH_nan_or_inf:
-+ /* Check if opH is NaN, if so return NaN */
-+ cbr r11, 31
-+ or lr, r11, r10
-+ brne __avr32_f64_add_return_nan
-+
-+ /* opH is Inf. */
-+ /* Check if opL is Inf. or NaN */
-+ cp.w r6, 0x7ff
-+ breq __avr32_f64_add_opL_nan_or_inf
-+ ldm sp++, r5, r6, r7, pc/* opL not Inf or NaN, return opH */
-+__avr32_f64_add_opL_nan_or_inf:
-+ cbr r9, 31
-+ or lr, r9, r8
-+ brne __avr32_f64_add_return_nan
-+ mov r10, 0 /* Generate Inf in r11, r10 */
-+ mov r11, 0
-+ orh r11, 0x7ff0
-+ ldm sp++, r5, r6, r7, pc/* opL Inf, return Inf */
-+__avr32_f64_add_return_nan:
-+ mov r10, -1 /* Generate NaN in r11, r10 */
-+ mov r11, -1
-+ ldm sp++, r5, r6, r7, pc/* opL Inf or NaN, return NaN */
-+
-+
-+__avr32_f64_add_longshift:
-+ /* large (>=32) shift amount, only lsw will have bits left after shift.
-+ note that shift operations will use ((shift count=r6) mod 32) so
-+ we do not need to subtract 32 from shift count. */
-+ /* Saturate the shift amount to 63. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r6 >> 0, 6
-+#if defined(L_avr32_f64_addsub)
-+ /* first remember whether part that is lost contains any 1 bits ... */
-+ lsl lr,r9,r5 /* save all lost bits from msw */
-+ or lr,r8 /* also save lost bits (all) from lsw
-+ now lr != 0 if we lose any bits */
-+#endif
-+ /* ... and now to the actual shift */
-+ mov r8,r9 /* msw -> lsw (i.e. "shift 32 first")*/
-+ mov r9,0 /* clear msw */
-+ lsr r8,r8,r6 /* make rest of shift inside lsw*/
-+#if defined(L_avr32_f64_addsub)
-+ cp.w lr,0 /* if any '1' bit in part we lost ...*/
-+ sreq lr
-+ or r8, lr /* ... we need to set sticky bit*/
-+#endif
-+ rjmp __avr32_f64_add_shift_done
-+
-+__avr32_f64_add_res_of:
-+ /* We overflowed. Increase exponent and shift mantissa.*/
-+ /* [r7]:exp, [r11, r10]:mant */
-+ ror r11
-+ lsr r10, 1
-+ sub r7, -1
-+
-+ /* Clear mantissa to set result to Inf if the exponent is 255. */
-+ cp.w r7, 0x7ff
-+ moveq r10, 0
-+ moveq r11, 0
-+ rjmp __avr32_f64_add_res_of_done
-+
-+
-+#endif
-+
-+#ifdef L_avr32_f64_to_u32
-+ /* This goes into L_fixdfsi */
-+#endif
-+
-+
-+#ifdef L_avr32_f64_to_s32
-+ .global __avr32_f64_to_u32
-+ .type __avr32_f64_to_u32,@function
-+__avr32_f64_to_u32:
-+ cp.w r11, 0
-+ retmi 0 /* Negative returns 0 */
-+
-+ /* Fallthrough to df to signed si conversion */
-+ .global __avr32_f64_to_s32
-+ .type __avr32_f64_to_s32,@function
-+__avr32_f64_to_s32:
-+ lsl r12,r11,1
-+ lsr r12,21 /* extract exponent*/
-+ sub r12,1023 /* convert to unbiased exponent.*/
-+ retlo 0 /* too small exponent implies zero. */
-+
-+1:
-+ rsub r12,r12,31 /* shift count = 31 - exponent */
-+ mov r9,r11 /* save sign for later...*/
-+ lsl r11,11 /* remove exponent and sign*/
-+ sbr r11,31 /* add implicit bit*/
-+ or r11,r11,r10>>21 /* get rest of bits from lsw of double */
-+ lsr r11,r11,r12 /* shift down mantissa to final place */
-+ lsl r9,1 /* sign -> carry */
-+ retcc r11 /* if positive, we are done */
-+ neg r11 /* if negative float, negate result */
-+ ret r11
-+
-+#endif /* L_fixdfsi*/
-+
-+#ifdef L_avr32_f64_to_u64
-+ /* Actual function is in L_fixdfdi */
-+#endif
-+
-+#ifdef L_avr32_f64_to_s64
-+ .global __avr32_f64_to_u64
-+ .type __avr32_f64_to_u64,@function
-+__avr32_f64_to_u64:
-+ cp.w r11,0
-+ /* Negative numbers return zero */
-+ movmi r10, 0
-+ movmi r11, 0
-+ retmi r11
-+
-+
-+
-+ /* Fallthrough */
-+ .global __avr32_f64_to_s64
-+ .type __avr32_f64_to_s64,@function
-+__avr32_f64_to_s64:
-+ lsl r9,r11,1
-+ lsr r9,21 /* get exponent*/
-+ sub r9,1023 /* convert to correct range*/
-+ /* Return zero if exponent to small */
-+ movlo r10, 0
-+ movlo r11, 0
-+ retlo r11
-+
-+ mov r8,r11 /* save sign for later...*/
-+1:
-+ lsl r11,11 /* remove exponent */
-+ sbr r11,31 /* add implicit bit*/
-+ or r11,r11,r10>>21 /* get rest of bits from lsw of double*/
-+ lsl r10,11 /* align lsw correctly as well */
-+ rsub r9,r9,63 /* shift count = 63 - exponent */
-+ breq 1f
-+
-+ cp.w r9,32 /* is shift count more than one reg? */
-+ brhs 0f
-+
-+ mov r12,r11 /* save msw */
-+ lsr r10,r10,r9 /* small shift count, shift down lsw */
-+ lsr r11,r11,r9 /* small shift count, shift down msw */
-+ rsub r9,r9,32 /* get 32-size of shifted out tail */
-+ lsl r12,r12,r9 /* align part to move from msw to lsw */
-+ or r10,r12 /* combine to get new lsw */
-+ rjmp 1f
-+
-+0:
-+ lsr r10,r11,r9 /* large shift count,only lsw get bits
-+ note that shift count is modulo 32*/
-+ mov r11,0 /* msw will be 0 */
-+
-+1:
-+ lsl r8,1 /* sign -> carry */
-+ retcc r11 /* if positive, we are done */
-+
-+ neg r11 /* if negative float, negate result */
-+ neg r10
-+ scr r11
-+ ret r11
-+
-+#endif
-+
-+#ifdef L_avr32_u32_to_f64
-+ /* Code located in L_floatsidf */
-+#endif
-+
-+#ifdef L_avr32_s32_to_f64
-+ .global __avr32_u32_to_f64
-+ .type __avr32_u32_to_f64,@function
-+__avr32_u32_to_f64:
-+ sub r11, r12, 0 /* Move to r11 and force Z flag to be updated */
-+ mov r12, 0 /* always positive */
-+ rjmp 0f /* Jump to common code for floatsidf */
-+
-+ .global __avr32_s32_to_f64
-+ .type __avr32_s32_to_f64,@function
-+__avr32_s32_to_f64:
-+ mov r11, r12 /* Keep original value in r12 for sign */
-+ abs r11 /* Absolute value if r12 */
-+0:
-+ mov r10,0 /* let remaining bits be zero */
-+ reteq r11 /* zero long will return zero float */
-+
-+ pushm lr
-+ mov r9,31+1023 /* set exponent */
-+
-+ normalize_df r9 /*exp*/, r10, r11 /* mantissa */, r8, lr /* scratch */
-+
-+ /* Check if a subnormal result was created */
-+ cp.w r9, 0
-+ brgt 0f
-+
-+ adjust_subnormal_df r9 /* exp */, r10, r11 /* Mantissa */, r12 /*sign*/, r8, lr /* scratch */
-+ popm pc
-+0:
-+
-+ /* Round result */
-+ round_df r9 /*exp*/, r10, r11 /* Mantissa */, r8 /*scratch*/
-+ cp.w r9,0x7ff
-+ brlt 0f
-+ /*Return infinity */
-+ mov r10, 0
-+ mov r11, 0
-+ orh r11, 0xffe0
-+ rjmp __floatsidf_return_op1
-+
-+0:
-+
-+ /* Pack */
-+ pack_df r9 /*exp*/, r10, r11 /* mantissa */, r10, r11 /* Output df number*/
-+__floatsidf_return_op1:
-+ lsl r12,1 /* shift in sign bit */
-+ ror r11
-+
-+ popm pc
-+#endif
-+
-+
-+#ifdef L_avr32_f32_cmp_eq
-+ .global __avr32_f32_cmp_eq
-+ .type __avr32_f32_cmp_eq,@function
-+__avr32_f32_cmp_eq:
-+ cp.w r12, r11
-+ breq 0f
-+ /* If not equal check for +/-0 */
-+ /* Or together the two values and shift out the sign bit.
-+ If the result is zero, then the two values are both zero. */
-+ or r12, r11
-+ lsl r12, 1
-+ sreq r12
-+ ret r12
-+0:
-+ /* Numbers were equal. Check for NaN or Inf */
-+ mov r11, 0
-+ orh r11, 0xff00
-+ lsl r12, 1
-+ cp.w r12, r11
-+ srls r12 /* 0 if NaN, 1 otherwise */
-+ ret r12
-+#endif
-+
-+#if defined(L_avr32_f32_cmp_ge) || defined(L_avr32_f32_cmp_lt)
-+#ifdef L_avr32_f32_cmp_ge
-+ .global __avr32_f32_cmp_ge
-+ .type __avr32_f32_cmp_ge,@function
-+__avr32_f32_cmp_ge:
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+ .global __avr32_f32_cmp_lt
-+ .type __avr32_f32_cmp_lt,@function
-+__avr32_f32_cmp_lt:
-+#endif
-+ lsl r10, r12, 1 /* Remove sign bits */
-+ lsl r9, r11, 1
-+ mov r8, 0
-+ orh r8, 0xff00
-+ cp.w r10, r8
-+ rethi 0 /* Op0 is NaN */
-+ cp.w r9, r8
-+ rethi 0 /* Op1 is Nan */
-+
-+ eor r8, r11, r12
-+ bld r12, 31
-+#ifdef L_avr32_f32_cmp_ge
-+ srcc r8 /* Set result to true if op0 is positive*/
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+ srcs r8 /* Set result to true if op0 is negative*/
-+#endif
-+ retmi r8 /* Return if signs are different */
-+ brcs 0f /* Both signs negative? */
-+
-+ /* Both signs positive */
-+ cp.w r12, r11
-+#ifdef L_avr32_f32_cmp_ge
-+ srhs r12
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+ srlo r12
-+#endif
-+ retal r12
-+0:
-+ /* Both signs negative */
-+ cp.w r11, r12
-+#ifdef L_avr32_f32_cmp_ge
-+ srhs r12
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+ srlo r12
-+#endif
-+ retal r12
-+#endif
-+
-+
-+#ifdef L_avr32_f64_cmp_eq
-+ .global __avr32_f64_cmp_eq
-+ .type __avr32_f64_cmp_eq,@function
-+__avr32_f64_cmp_eq:
-+ cp.w r10,r8
-+ cpc r11,r9
-+ breq 0f
-+
-+ /* Args were not equal*/
-+ /* Both args could be zero with different sign bits */
-+ lsl r11,1 /* get rid of sign bits */
-+ lsl r9,1
-+ or r11,r10 /* Check if all bits are zero */
-+ or r11,r9
-+ or r11,r8
-+ sreq r12 /* If all zeros the arguments are equal
-+ so return 1 else return 0 */
-+ ret r12
-+0:
-+ /* check for NaN */
-+ lsl r11,1
-+ mov r12, 0
-+ orh r12, 0xffe0
-+ cp.w r10,0
-+ cpc r11,r12 /* check if nan or inf */
-+ srls r12 /* If Arg is NaN return 0 else 1*/
-+ ret r12 /* Return */
-+
-+#endif
-+
-+
-+#if defined(L_avr32_f64_cmp_ge) || defined(L_avr32_f64_cmp_lt)
-+
-+#ifdef L_avr32_f64_cmp_ge
-+ .global __avr32_f64_cmp_ge
-+ .type __avr32_f64_cmp_ge,@function
-+__avr32_f64_cmp_ge:
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+ .global __avr32_f64_cmp_lt
-+ .type __avr32_f64_cmp_lt,@function
-+__avr32_f64_cmp_lt:
-+#endif
-+
-+ /* compare magnitude of op1 and op2 */
-+ pushm lr
-+
-+ lsl r11,1 /* Remove sign bit of op1 */
-+ srcs lr /* Sign op1 to lsb of lr*/
-+ lsl r9,1 /* Remove sign bit of op2 */
-+ rol lr /* Sign op2 to lsb of lr, sign bit op1 bit 1 of lr*/
-+
-+ /* Check for Nan */
-+ mov r12, 0
-+ orh r12, 0xffe0
-+ cp.w r10,0
-+ cpc r11,r12
-+ movhi r12, 0 /* Return false for NaN */
-+ brhi 0f /* We have NaN */
-+ cp.w r8,0
-+ cpc r9,r12
-+ movhi r12, 0 /* Return false for NaN */
-+ brhi 0f /* We have NaN */
-+
-+ cp.w lr,3 /* both operands negative ?*/
-+ breq 1f
-+
-+ cp.w lr,1 /* both operands positive? */
-+ brlo 2f
-+
-+ /* Different signs. If sign of op1 is negative the difference
-+ between op1 and op2 will always be negative, and if op1 is
-+ positive the difference will always be positive */
-+#ifdef L_avr32_f64_cmp_ge
-+ sreq r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+ srne r12
-+#endif
-+ popm pc
-+
-+
-+2:
-+ /* Both operands positive. Just compute the difference */
-+ cp.w r10,r8
-+ cpc r11,r9
-+#ifdef L_avr32_f64_cmp_ge
-+ srhs r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+ srlo r12
-+#endif
-+ popm pc
-+
-+1:
-+ /* Both operands negative. Compute the difference with operands switched */
-+ cp r8,r10
-+ cpc r9,r11
-+#ifdef L_avr32_f64_cmp_ge
-+ srhs r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+ srlo r12
-+#endif
-+0:
-+ popm pc
-+#endif
-+
-+
-+
-+#ifdef L_avr32_f64_div
-+ .align 2
-+ .global __avr32_f64_div
-+ .type __avr32_f64_div,@function
-+
-+__avr32_f64_div:
-+ stm --sp, r0, r1, r2, r3, r4, r5, r6, r7,lr
-+ /* op1 in {r11,r10}*/
-+ /* op2 in {r9,r8}*/
-+ eor lr, r11, r9 /* MSB(lr) = Sign(op1) ^ Sign(op2) */
-+
-+
-+ /* Unpack op1 to 2.62 format*/
-+ /* exp: r7 */
-+ /* sf: r11, r10 */
-+ lsr r7, r11, 20 /* Extract exponent */
-+
-+ lsl r11, 9 /* Extract mantissa, leave room for implicit bit */
-+ or r11, r11, r10>>23
-+ lsl r10, 9
-+ sbr r11, 29 /* Insert implicit bit */
-+ andh r11, 0x3fff /*Mask last part of exponent since we use 2.62 format*/
-+
-+ cbr r7, 11 /* Clear sign bit */
-+ /* Check if normalization is needed */
-+ breq 11f /*If number is subnormal, normalize it */
-+22:
-+ cp r7, 0x7ff
-+ brhs 2f /* Check op1 for NaN or Inf */
-+
-+ /* Unpack op2 to 2.62 format*/
-+ /* exp: r6 */
-+ /* sf: r9, r8 */
-+ lsr r6, r9, 20 /* Extract exponent */
-+
-+ lsl r9, 9 /* Extract mantissa, leave room for implicit bit */
-+ or r9, r9, r8>>23
-+ lsl r8, 9
-+ sbr r9, 29 /* Insert implicit bit */
-+ andh r9, 0x3fff /*Mask last part of exponent since we use 2.62 format*/
-+
-+ cbr r6, 11 /* Clear sign bit */
-+ /* Check if normalization is needed */
-+ breq 13f /*If number is subnormal, normalize it */
-+23:
-+ cp r6, 0x7ff
-+ brhs 3f /* Check op2 for NaN or Inf */
-+
-+ /* Calculate new exponent */
-+ sub r7, r6
-+ sub r7,-1023
-+
-+ /* Divide */
-+ /* Approximating 1/d with the following recurrence: */
-+ /* R[j+1] = R[j]*(2-R[j]*d) */
-+ /* Using 2.62 format */
-+ /* TWO: r12 */
-+ /* d = op2 = divisor (2.62 format): r9,r8 */
-+ /* Multiply result : r5, r4 */
-+ /* Initial guess : r3, r2 */
-+ /* New approximations : r3, r2 */
-+ /* op1 = Dividend (2.62 format) : r11, r10 */
-+
-+ mov r12, 1 /* Load TWO */
-+ brev r12
-+
-+ /* Load initial guess, using look-up table */
-+ /* Initial guess is of format 01.XY, where XY is constructed as follows: */
-+ /* Let d be of following format: 00.1xy....., then XY=~xy */
-+ /* For d=00.100 = 0,5 -> initial guess=01.11 = 1,75 */
-+ /* For d=00.101 = 0,625 -> initial guess=01.11 = 1,5 */
-+ /* For d=00.110 = 0,75 -> initial guess=01.11 = 1,25 */
-+ /* For d=00.111 = 0,875 -> initial guess=01.11 = 1,0 */
-+ /* r2 is also part of the reg pair forming initial guess, but it*/
-+ /* is kept uninitialized to save one cycle since it has so low significance*/
-+
-+ lsr r3, r12, 1
-+ bfextu r4, r9, 27, 2
-+ com r4
-+ bfins r3, r4, 28, 2
-+
-+ /* First approximation */
-+ /* Approximating to 32 bits */
-+ /* r5 = R[j]*d */
-+ mulu.d r4, r3, r9
-+ /* r5 = 2-R[j]*d */
-+ sub r5, r12, r5<<2
-+ /* r3 = R[j]*(2-R[j]*d) */
-+ mulu.d r4, r3, r5
-+ lsl r3, r5, 2
-+
-+ /* Second approximation */
-+ /* Approximating to 32 bits */
-+ /* r5 = R[j]*d */
-+ mulu.d r4, r3, r9
-+ /* r5 = 2-R[j]*d */
-+ sub r5, r12, r5<<2
-+ /* r3 = R[j]*(2-R[j]*d) */
-+ mulu.d r4, r3, r5
-+ lsl r3, r5, 2
-+
-+ /* Third approximation */
-+ /* Approximating to 32 bits */
-+ /* r5 = R[j]*d */
-+ mulu.d r4, r3, r9
-+ /* r5 = 2-R[j]*d */
-+ sub r5, r12, r5<<2
-+ /* r3 = R[j]*(2-R[j]*d) */
-+ mulu.d r4, r3, r5
-+ lsl r3, r5, 2
-+
-+ /* Fourth approximation */
-+ /* Approximating to 64 bits */
-+ /* r5,r4 = R[j]*d */
-+ mul_approx_df r3 /*ah*/, r2 /*al*/, r9 /*bh*/, r8 /*bl*/, r5 /*rh*/, r4 /*rl*/, r1 /*sh*/, r0 /*sl*/
-+ lsl r5, 2
-+ or r5, r5, r4>>30
-+ lsl r4, 2
-+ /* r5,r4 = 2-R[j]*d */
-+ neg r4
-+ sbc r5, r12, r5
-+ /* r3,r2 = R[j]*(2-R[j]*d) */
-+ mul_approx_df r3 /*ah*/, r2 /*al*/, r5 /*bh*/, r4 /*bl*/, r5 /*rh*/, r4 /*rl*/, r1 /*sh*/, r0 /*sl*/
-+ lsl r3, r5, 2
-+ or r3, r3, r4>>30
-+ lsl r2, r4, 2
-+
-+
-+ /* Fifth approximation */
-+ /* Approximating to 64 bits */
-+ /* r5,r4 = R[j]*d */
-+ mul_approx_df r3 /*ah*/, r2 /*al*/, r9 /*bh*/, r8 /*bl*/, r5 /*rh*/, r4 /*rl*/, r1 /*sh*/, r0 /*sl*/
-+ lsl r5, 2
-+ or r5, r5, r4>>30
-+ lsl r4, 2
-+ /* r5,r4 = 2-R[j]*d */
-+ neg r4
-+ sbc r5, r12, r5
-+ /* r3,r2 = R[j]*(2-R[j]*d) */
-+ mul_approx_df r3 /*ah*/, r2 /*al*/, r5 /*bh*/, r4 /*bl*/, r5 /*rh*/, r4 /*rl*/, r1 /*sh*/, r0 /*sl*/
-+ lsl r3, r5, 2
-+ or r3, r3, r4>>30
-+ lsl r2, r4, 2
-+
-+
-+ /* Multiply with dividend to get quotient */
-+ mul_approx_df r3 /*ah*/, r2 /*al*/, r11 /*bh*/, r10 /*bl*/, r3 /*rh*/, r2 /*rl*/, r1 /*sh*/, r0 /*sl*/
-+
-+ /* Shift by 3 to get result in 1.63 format, as required by the exponent. */
-+ /* Note that 1.63 format is already used by the exponent in r7, since */
-+ /* a bias of 1023 was added to the result exponent, even though the implicit */
-+ /* bit was inserted. This gives the exponent an additional bias of 1, which */
-+ /* supports 1.63 format. */
-+ lsl r3, r3, 3
-+ or r3, r3, r2>>29
-+ lsl r2, r2, 3
-+
-+ /* To increase speed, this result is not corrected before final rounding.*/
-+ /* This may give a difference to IEEE compliant code of 1 ULP.*/
-+
-+ /* Adjust exponent and mantissa */
-+ /* r7:exp, [r3, r2]:mant, [r12,r11,r10]:scratch*/
-+ /* Mantissa may be of the format 0.xxxx or 1.xxxx. */
-+ /* In the first case, shift one pos to left.*/
-+ sub r10, r7, 1
-+ mov r12, r3
-+ lsl r11, r2, 1
-+ rol r12
-+ bld r3, 31
-+ movne r7, r10
-+ movne r3, r12
-+ movne r2, r11
-+ cp r7, 0
-+ breq 15f /*Result was subnormal. Flush-to-zero and return zero*/
-+
-+ /* Result was not subnormal. Perform rounding. */
-+ /* Note that the tie case (for round-to-even) can not occur in division. */
-+ /* [r7]:exp, [r3, r2]:mant */
-+ /* Mantissa is in 0.64 format. Round by adding 1<<(64-(52+2))=1<<10*/
-+ mov r12, (1<<10)
-+ add r2, r12
-+ acr r3
-+ /* Adjust exponent if we overflowed.*/
-+ subcs r7, -1
-+
-+
-+
-+ /* Pack final result*/
-+ /* Input: [r7]:exp, [r3, r2]:mant */
-+ /* Result in [r11,r10] */
-+ /* Insert exponent and sign bit*/
-+ lsl r11, r7, 20
-+ bld lr, 31
-+ bst r11, 31
-+ /* Insert mantissa */
-+ cbr r3, 31 /*Clear implicit bit*/
-+ or r11, r11, r3>>11
-+ lsr r10, r2, 11
-+ or r10, r10, r3<<21
-+ /* Return result in [r11,r10] */
-+ ldm sp++, r0, r1, r2, r3, r4, r5, r6, r7,pc
-+
-+
-+2:
-+ /* Op1 is NaN or inf */
-+ andh r11, 0x000f /* Extract mantissa */
-+ or r11, r10
-+ brne 16f /* Return NaN if op1 is NaN */
-+ /* Op1 is inf check op2 */
-+ lsr r6, r9, 20 /* Extract exponent */
-+ cbr r6, 8 /* Clear sign bit */
-+ cp r6, 0x7ff
-+ brne 17f /* Inf/number gives inf, return inf */
-+ rjmp 16f /* The rest gives NaN*/
-+
-+3:
-+ /* Op1 is a valid number. Op 2 is NaN or inf */
-+ andh r9, 0x000f /* Extract mantissa */
-+ or r9, r8
-+ brne 16f /* Return NaN if op2 is NaN */
-+ rjmp 15f /* Op2 was inf, return zero*/
-+
-+11: /* Op1 was denormal. Fix it. */
-+ lsl r11, 2
-+ or r11, r11, r10 >> 30
-+ lsl r10, 2
-+ cbr r11, 31
-+ /* Check if op1 is zero. */
-+ or r4, r10, r11
-+ breq __avr32_f64_div_op1_zero
-+ normalize_df r7 /*exp*/, r10, r11 /*Mantissa*/, r4, r5 /*scratch*/
-+ lsr r10, 2
-+ or r10, r10, r11 << 30
-+ lsr r11, 2
-+ rjmp 22b
-+
-+
-+13: /* Op2 was denormal. Fix it */
-+ lsl r9, 2
-+ or r9, r9, r8 >> 30
-+ lsl r8, 2
-+ cbr r9, 31
-+ /* Check if op2 is zero. */
-+ or r4, r9, r8
-+ breq 17f /* Divisor is zero -> return Inf */
-+ normalize_df r6 /*exp*/, r8, r9 /*Mantissa*/, r4, r5 /*scratch*/
-+ lsr r8, 2
-+ or r8, r8, r9 << 30
-+ lsr r9, 2
-+ rjmp 23b
-+
-+
-+15: /* Divide result was subnormal. Return zero. */
-+ mov r11, lr /*Get correct sign*/
-+ andh r11, 0x8000, COH
-+ mov r10, 0
-+ ldm sp++, r0, r1, r2, r3, r4, r5, r6, r7,pc
-+
-+16: /* Return NaN. */
-+ mov r11, -1
-+ mov r10, -1
-+ ldm sp++, r0, r1, r2, r3, r4, r5, r6, r7,pc
-+
-+17: /* Return INF. */
-+ mov r11, lr /*Get correct sign*/
-+ andh r11, 0x8000, COH
-+ orh r11, 0x7ff0
-+ mov r10, 0
-+ ldm sp++, r0, r1, r2, r3, r4, r5, r6, r7,pc
-+
-+__avr32_f64_div_op1_zero:
-+ or r5, r8, r9 << 1
-+ breq 16b /* 0.0/0.0 -> NaN */
-+ bfextu r4, r9, 20, 11
-+ cp r4, 0x7ff
-+ brne 15b /* Return zero */
-+ /* Check if divisor is Inf or NaN */
-+ or r5, r8, r9 << 12
-+ breq 15b /* Divisor is inf -> return zero */
-+ rjmp 16b /* Return NaN */
-+
-+
-+
-+
-+#endif
-+
-+#if defined(L_avr32_f32_addsub) || defined(L_avr32_f32_addsub_fast)
-+
-+ .align 2
-+__avr32_f32_sub_from_add:
-+ /* Switch sign on op2 */
-+ eorh r11, 0x8000
-+
-+#if defined(L_avr32_f32_addsub_fast)
-+ .global __avr32_f32_sub_fast
-+ .type __avr32_f32_sub_fast,@function
-+__avr32_f32_sub_fast:
-+#else
-+ .global __avr32_f32_sub
-+ .type __avr32_f32_sub,@function
-+__avr32_f32_sub:
-+#endif
-+
-+ /* Check signs */
-+ eor r8, r11, r12
-+ /* Different signs, use subtraction. */
-+ brmi __avr32_f32_add_from_sub
-+
-+ /* Get sign of op1 */
-+ mov r8, r12
-+ andh r12, 0x8000, COH
-+
-+ /* Remove sign from operands */
-+ cbr r11, 31
-+#if defined(L_avr32_f32_addsub_fast)
-+ reteq r8 /* If op2 is zero return op1 */
-+#endif
-+ cbr r8, 31
-+
-+ /* Put the number with the largest exponent in r10
-+ and the number with the smallest exponent in r9 */
-+ max r10, r8, r11
-+ min r9, r8, r11
-+ cp r10, r8 /*If largest operand (in R10) is not equal to op1*/
-+ subne r12, 1 /* Subtract 1 from sign, which will invert MSB of r12*/
-+ andh r12, 0x8000, COH /*Mask all but MSB*/
-+
-+ /* Unpack exponent and mantissa of op1 */
-+ lsl r8, r10, 8
-+ sbr r8, 31 /* Set implicit bit. */
-+ lsr r10, 23
-+
-+ /* op1 is NaN or Inf. */
-+ cp.w r10, 0xff
-+ breq __avr32_f32_sub_op1_nan_or_inf
-+
-+ /* Unpack exponent and mantissa of op2 */
-+ lsl r11, r9, 8
-+ sbr r11, 31 /* Set implicit bit. */
-+ lsr r9, 23
-+
-+#if defined(L_avr32_f32_addsub)
-+ /* Keep sticky bit for correct IEEE rounding */
-+ st.w --sp, r12
-+
-+ /* op2 is either zero or subnormal. */
-+ breq __avr32_f32_sub_op2_subnormal
-+0:
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r9, r10
-+
-+ /* Saturate the shift amount to 31. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r9 >> 0, 5
-+
-+ /* Shift mantissa of op2 to same decimal point as the mantissa
-+ of op1. */
-+ lsr r12, r11, r9
-+
-+ /* Put the remainding bits into r11[23:..].*/
-+ rsub r9, r9, (32-8)
-+ lsl r11, r11, r9
-+
-+ /* Now subtract the mantissas. */
-+ sub r8, r12
-+
-+ ld.w r12, sp++
-+
-+ /* Normalize resulting mantissa. */
-+ clz r9, r8
-+ lsl r8, r8, r9
-+ sub r10, r9
-+ brle __avr32_f32_sub_subnormal_result
-+
-+ /* Insert the bits we will remove from the mantissa into r11[31:24] */
-+ bfins r11, r8, 24, 8
-+#else
-+ /* Ignore sticky bit to simplify and speed up rounding */
-+ /* op2 is either zero or subnormal. */
-+ breq __avr32_f32_sub_op2_subnormal
-+0:
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r9, r10
-+
-+ /* Saturate the shift amount to 31. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r9 >> 0, 5
-+
-+ /* Shift mantissa of op2 to same decimal point as the mantissa
-+ of op1. */
-+ lsr r11, r11, r9
-+
-+ /* Now subtract the mantissas. */
-+ sub r8, r11
-+
-+ /* Normalize resulting mantissa. */
-+ clz r9, r8
-+ lsl r8, r8, r9
-+ sub r10, r9
-+ brle __avr32_f32_sub_subnormal_result
-+#endif
-+
-+ /* Pack result. */
-+ or r12, r12, r8 >> 8
-+ bfins r12, r10, 23, 8
-+
-+ /* Round */
-+__avr32_f32_sub_round:
-+#if defined(L_avr32_f32_addsub)
-+ mov r10, 0
-+ sbr r10, 31
-+ bld r12, 0
-+ subne r10, -1
-+ cp.w r11, r10
-+ subhs r12, -1
-+#else
-+ bld r8, 7
-+ acr r12
-+#endif
-+
-+ ret r12
-+
-+
-+__avr32_f32_sub_op2_subnormal:
-+ /* Fix implicit bit and adjust exponent of subnormals. */
-+ cbr r11, 31
-+ /* Set exponent to 1 if we do not have a zero. */
-+ movne r9,1
-+
-+ /* Check if op1 is also subnormal. */
-+ cp.w r10, 0
-+ brne 0b
-+
-+ cbr r8, 31
-+ /* If op1 is not zero set exponent to 1. */
-+ movne r10,1
-+
-+ rjmp 0b
-+
-+__avr32_f32_sub_op1_nan_or_inf:
-+ /* Check if op1 is NaN, if so return NaN */
-+ lsl r11, r8, 1
-+ retne -1
-+
-+ /* op1 is Inf. */
-+ bfins r12, r10, 23, 8 /* Generate Inf in r12 */
-+
-+ /* Check if op2 is Inf. or NaN */
-+ lsr r11, r9, 23
-+ cp.w r11, 0xff
-+ retne r12 /* op2 not Inf or NaN, return op1 */
-+
-+ ret -1 /* op2 Inf or NaN, return NaN */
-+
-+__avr32_f32_sub_subnormal_result:
-+ /* Check if the number is so small that
-+ it will be represented with zero. */
-+ rsub r10, r10, 9
-+ rsub r9, r10, 32
-+ retcs 0
-+
-+ /* Shift the mantissa into the correct position.*/
-+ lsr r10, r8, r10
-+ /* Add sign bit. */
-+ or r10, r12
-+
-+ /* Put the shifted out bits in the most significant part
-+ of r8. */
-+ lsl r8, r8, r9
-+
-+#if defined(L_avr32_f32_addsub)
-+ /* Add all the remainder bits used for rounding into r11 */
-+ andh r11, 0x00FF
-+ or r11, r8
-+#else
-+ lsr r8, 24
-+#endif
-+ rjmp __avr32_f32_sub_round
-+
-+
-+ .align 2
-+
-+__avr32_f32_add_from_sub:
-+ /* Switch sign on op2 */
-+ eorh r11, 0x8000
-+
-+#if defined(L_avr32_f32_addsub_fast)
-+ .global __avr32_f32_add_fast
-+ .type __avr32_f32_add_fast,@function
-+__avr32_f32_add_fast:
-+#else
-+ .global __avr32_f32_add
-+ .type __avr32_f32_add,@function
-+__avr32_f32_add:
-+#endif
-+
-+ /* Check signs */
-+ eor r8, r11, r12
-+ /* Different signs, use subtraction. */
-+ brmi __avr32_f32_sub_from_add
-+
-+ /* Get sign of op1 */
-+ mov r8, r12
-+ andh r12, 0x8000, COH
-+
-+ /* Remove sign from operands */
-+ cbr r11, 31
-+#if defined(L_avr32_f32_addsub_fast)
-+ reteq r8 /* If op2 is zero return op1 */
-+#endif
-+ cbr r8, 31
-+
-+ /* Put the number with the largest exponent in r10
-+ and the number with the smallest exponent in r9 */
-+ max r10, r8, r11
-+ min r9, r8, r11
-+
-+ /* Unpack exponent and mantissa of op1 */
-+ lsl r8, r10, 8
-+ sbr r8, 31 /* Set implicit bit. */
-+ lsr r10, 23
-+
-+ /* op1 is NaN or Inf. */
-+ cp.w r10, 0xff
-+ breq __avr32_f32_add_op1_nan_or_inf
-+
-+ /* Unpack exponent and mantissa of op2 */
-+ lsl r11, r9, 8
-+ sbr r11, 31 /* Set implicit bit. */
-+ lsr r9, 23
-+
-+#if defined(L_avr32_f32_addsub)
-+ /* Keep sticky bit for correct IEEE rounding */
-+ st.w --sp, r12
-+
-+ /* op2 is either zero or subnormal. */
-+ breq __avr32_f32_add_op2_subnormal
-+0:
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r9, r10
-+
-+ /* Saturate the shift amount to 31. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r9 >> 0, 5
-+
-+ /* Shift mantissa of op2 to same decimal point as the mantissa
-+ of op1. */
-+ lsr r12, r11, r9
-+
-+ /* Put the remainding bits into r11[23:..].*/
-+ rsub r9, r9, (32-8)
-+ lsl r11, r11, r9
-+ /* Insert the bits we will remove from the mantissa into r11[31:24] */
-+ bfins r11, r12, 24, 8
-+
-+ /* Now add the mantissas. */
-+ add r8, r12
-+
-+ ld.w r12, sp++
-+#else
-+ /* Ignore sticky bit to simplify and speed up rounding */
-+ /* op2 is either zero or subnormal. */
-+ breq __avr32_f32_add_op2_subnormal
-+0:
-+ /* Get shift amount to scale mantissa of op2. */
-+ rsub r9, r10
-+
-+ /* Saturate the shift amount to 31. If the amount
-+ is any larger op2 is insignificant. */
-+ satu r9 >> 0, 5
-+
-+ /* Shift mantissa of op2 to same decimal point as the mantissa
-+ of op1. */
-+ lsr r11, r11, r9
-+
-+ /* Now add the mantissas. */
-+ add r8, r11
-+
-+#endif
-+ /* Check if we overflowed. */
-+ brcs __avr32_f32_add_res_of
-+1:
-+ /* Pack result. */
-+ or r12, r12, r8 >> 8
-+ bfins r12, r10, 23, 8
-+
-+ /* Round */
-+#if defined(L_avr32_f32_addsub)
-+ mov r10, 0
-+ sbr r10, 31
-+ bld r12, 0
-+ subne r10, -1
-+ cp.w r11, r10
-+ subhs r12, -1
-+#else
-+ bld r8, 7
-+ acr r12
-+#endif
-+
-+ ret r12
-+
-+__avr32_f32_add_op2_subnormal:
-+ /* Fix implicit bit and adjust exponent of subnormals. */
-+ cbr r11, 31
-+ /* Set exponent to 1 if we do not have a zero. */
-+ movne r9,1
-+
-+ /* Check if op1 is also subnormal. */
-+ cp.w r10, 0
-+ brne 0b
-+
-+ cbr r8, 31
-+ /* If op1 is not zero set exponent to 1. */
-+ movne r10,1
-+
-+ rjmp 0b
-+
-+__avr32_f32_add_op1_nan_or_inf:
-+ /* Check if op1 is NaN, if so return NaN */
-+ lsl r11, r8, 1
-+ retne -1
-+
-+ /* op1 is Inf. */
-+ bfins r12, r10, 23, 8 /* Generate Inf in r12 */
-+
-+ /* Check if op2 is Inf. or NaN */
-+ lsr r11, r9, 23
-+ cp.w r11, 0xff
-+ retne r12 /* op2 not Inf or NaN, return op1 */
-+
-+ lsl r9, 9
-+ reteq r12 /* op2 Inf return op1 */
-+ ret -1 /* op2 is NaN, return NaN */
-+
-+__avr32_f32_add_res_of:
-+ /* We overflowed. Increase exponent and shift mantissa.*/
-+ lsr r8, 1
-+ sub r10, -1
-+
-+ /* Clear mantissa to set result to Inf if the exponent is 255. */
-+ cp.w r10, 255
-+ moveq r8, 0
-+ moveq r11, 0
-+ rjmp 1b
-+
-+
-+#endif
-+
-+
-+#if defined(L_avr32_f32_div) || defined(L_avr32_f32_div_fast)
-+ .align 2
-+
-+#if defined(L_avr32_f32_div_fast)
-+ .global __avr32_f32_div_fast
-+ .type __avr32_f32_div_fast,@function
-+__avr32_f32_div_fast:
-+#else
-+ .global __avr32_f32_div
-+ .type __avr32_f32_div,@function
-+__avr32_f32_div:
-+#endif
-+
-+ eor r8, r11, r12 /* MSB(r8) = Sign(op1) ^ Sign(op2) */
-+
-+ /* Unpack */
-+ lsl r12,1
-+ reteq 0 /* Return zero if op1 is zero */
-+ lsl r11,1
-+ breq 4f /* Check op2 for zero */
-+
-+ /* Unpack op1*/
-+ /* exp: r9 */
-+ /* sf: r12 */
-+ lsr r9, r12, 24
-+ breq 11f /*If number is subnormal*/
-+ cp r9, 0xff
-+ brhs 2f /* Check op1 for NaN or Inf */
-+ lsl r12, 7
-+ sbr r12, 31 /*Implicit bit*/
-+12:
-+
-+ /* Unpack op2*/
-+ /* exp: r10 */
-+ /* sf: r11 */
-+ lsr r10, r11, 24
-+ breq 13f /*If number is subnormal*/
-+ cp r10, 0xff
-+ brhs 3f /* Check op2 for NaN or Inf */
-+
-+ lsl r11,7
-+ sbr r11, 31 /*Implicit bit*/
-+14:
-+
-+ /* For UC3, store with predecrement is faster than stm */
-+ st.w --sp, r5
-+ st.d --sp, r6
-+
-+ /* Calculate new exponent */
-+ sub r9, r10
-+ sub r9,-127
-+
-+ /* Divide */
-+ /* Approximating 1/d with the following recurrence: */
-+ /* R[j+1] = R[j]*(2-R[j]*d) */
-+ /* Using 2.30 format */
-+ /* TWO: r10 */
-+ /* d: r5 */
-+ /* Multiply result : r6, r7 */
-+ /* Initial guess : r11 */
-+ /* New approximations : r11 */
-+ /* Dividend : r12 */
-+
-+ mov r10, 1 /* Load TWO */
-+ brev r10
-+
-+ lsr r12, 2 /* Get significand of Op1 in 2.30 format */
-+ lsr r5, r11, 2 /* Get significand of Op2 (=d) in 2.30 format */
-+
-+ /* Load initial guess, using look-up table */
-+ /* Initial guess is of format 01.XY, where XY is constructed as follows: */
-+ /* Let d be of following format: 00.1xy....., then XY=~xy */
-+ /* For d=00.100 = 0,5 -> initial guess=01.11 = 1,75 */
-+ /* For d=00.101 = 0,625 -> initial guess=01.11 = 1,5 */
-+ /* For d=00.110 = 0,75 -> initial guess=01.11 = 1,25 */
-+ /* For d=00.111 = 0,875 -> initial guess=01.11 = 1,0 */
-+
-+ lsr r11, r10, 1
-+ bfextu r6, r5, 27, 2
-+ com r6
-+ bfins r11, r6, 28, 2
-+
-+ /* First approximation */
-+ /* r7 = R[j]*d */
-+ mulu.d r6, r11, r5
-+ /* r7 = 2-R[j]*d */
-+ sub r7, r10, r7<<2
-+ /* r11 = R[j]*(2-R[j]*d) */
-+ mulu.d r6, r11, r7
-+ lsl r11, r7, 2
-+
-+ /* Second approximation */
-+ /* r7 = R[j]*d */
-+ mulu.d r6, r11, r5
-+ /* r7 = 2-R[j]*d */
-+ sub r7, r10, r7<<2
-+ /* r11 = R[j]*(2-R[j]*d) */
-+ mulu.d r6, r11, r7
-+ lsl r11, r7, 2
-+
-+ /* Third approximation */
-+ /* r7 = R[j]*d */
-+ mulu.d r6, r11, r5
-+ /* r7 = 2-R[j]*d */
-+ sub r7, r10, r7<<2
-+ /* r11 = R[j]*(2-R[j]*d) */
-+ mulu.d r6, r11, r7
-+ lsl r11, r7, 2
-+
-+ /* Fourth approximation */
-+ /* r7 = R[j]*d */
-+ mulu.d r6, r11, r5
-+ /* r7 = 2-R[j]*d */
-+ sub r7, r10, r7<<2
-+ /* r11 = R[j]*(2-R[j]*d) */
-+ mulu.d r6, r11, r7
-+ lsl r11, r7, 2
-+
-+
-+ /* Multiply with dividend to get quotient, r7 = sf(op1)/sf(op2) */
-+ mulu.d r6, r11, r12
-+
-+ /* Shift by 3 to get result in 1.31 format, as required by the exponent. */
-+ /* Note that 1.31 format is already used by the exponent in r9, since */
-+ /* a bias of 127 was added to the result exponent, even though the implicit */
-+ /* bit was inserted. This gives the exponent an additional bias of 1, which */
-+ /* supports 1.31 format. */
-+ lsl r10, r7, 3
-+
-+#if defined(L_avr32_f32_div)
-+ /* To perform correct rounding, check for nonzero remainder, */
-+ /* and set LSB in quot if remainder != 0 */
-+ /* Remainder = dividend(r12) - divisor(r5)*quotient(r10) */
-+
-+ lsl r5, 1 /* Transform divisor from 2.30 to 1.31 format */
-+ /* Mask all bits lower than guard in quotient. */
-+ /* These bits are inexact due to approximative algorithm */
-+ andl r10, 0xffc0
-+ /* Add 1 in least significant bit pos to make sure approximation is from above */
-+ sub r10, -64
-+ mulu.d r6, r5, r10
-+ /* If remainder < 0, truncated quotient is too large, so the */
-+ /* delta added must be subtracted to get the correct truncated quotient. */
-+ sub r12, r7 /* Calculate remainder and implicitly set flags */
-+ sublt r10, 64
-+#endif
-+
-+ /* For UC3, load with postincrement is faster than ldm */
-+ ld.d r6, sp++
-+ ld.w r5, sp++
-+
-+ /* Adjust exponent and mantissa */
-+ /* r9:exp, r10:mant, r11:scratch*/
-+ clz r11, r10
-+ sub r9, r11
-+ breq 16f /*Result was subnormal*/
-+ lsl r10, r10, r11
-+
-+ /* Result was not subnormal. Perform rounding. */
-+ /* Note that the tie case (for round-to-even) can not occur in division. */
-+ /* r9:exp, r10:mant*/
-+ sub r10, -1*(0x80)
-+ /* Adjust exponent if we overflowed. Note that we must use {cc}
-+ since we perform the add using a sub insn. */
-+ subcc r9, -1
-+
-+ /* Pack final result*/
-+ lsr r12, r10, 7
-+ bfins r12, r9, 24, 8
-+__divsf_return_op1:
-+ lsl r8, 1
-+ ror r12
-+ ret r12
-+
-+
-+2:
-+ /* Op1 is NaN or inf */
-+ retne -1 /* Return NaN if op1 is NaN */
-+ /* Op1 is inf check op2 */
-+ mov r9, 0xff
-+ brev r9
-+ cp r11, r9
-+ brlo __divsf_return_op1 /* inf/number gives inf */
-+ ret -1 /* The rest gives NaN*/
-+3:
-+ /* Op1 is NaN or inf */
-+ reteq 0 /* Return zero if number/inf*/
-+ ret -1 /* Return NaN*/
-+4:
-+ /* Op2 is zero ? */
-+ tst r12,r12
-+ reteq -1 /* 0.0/0.0 is NaN */
-+ /* Nonzero/0.0 is Inf. Sign bit will be shifted in before returning*/
-+ mov r12, 0x7ff
-+ brev r12
-+ rjmp __divsf_return_op1
-+
-+11: /* Op1 was denormal. Fix it. */
-+ lsl r12,7
-+ clz r9,r12
-+ lsl r12,r12,r9
-+ rsub r9,r9,1
-+ rjmp 12b
-+
-+13: /* Op2 was denormal. Fix it. */
-+ lsl r11,7
-+ clz r10,r11
-+ lsl r11,r11,r10
-+ rsub r10,r10,1
-+ rjmp 14b
-+
-+
-+16: /* Divide result was subnormal. Fix it and return. */
-+#if defined(L_avr32_f32_div)
-+ lsl r10, r10, r11 /*Perform shift required by adjustment of exponent and mantissa*/
-+ adjust_subnormal_sf r12 /*sf*/, r9 /*exp*/, r10 /*mant*/, r8 /*sign*/,r11 /*scratch*/
-+#else
-+ /*Flush to zero*/
-+ mov r12, 0
-+#endif
-+ ret r12
-+
-+#endif
-+
-+#ifdef L_avr32_f32_mul
-+ .global __avr32_f32_mul
-+ .type __avr32_f32_mul,@function
-+
-+
-+__avr32_f32_mul:
-+ mov r8, r12
-+ eor r12, r11 /* MSB(r8) = Sign(op1) ^ Sign(op2) */
-+ andh r12, 0x8000, COH
-+
-+ /* arrange operands so that that op1 >= op2 */
-+ cbr r8, 31
-+ breq __avr32_f32_mul_op1_zero
-+ cbr r11, 31
-+
-+ /* Put the number with the largest exponent in r10
-+ and the number with the smallest exponent in r9 */
-+ max r10, r8, r11
-+ min r9, r8, r11
-+
-+ /* Unpack exponent and mantissa of op1 */
-+ lsl r8, r10, 8
-+ sbr r8, 31 /* Set implicit bit. */
-+ lsr r10, 23
-+
-+ /* op1 is NaN or Inf. */
-+ cp.w r10, 0xff
-+ breq __avr32_f32_mul_op1_nan_or_inf
-+
-+ /* Unpack exponent and mantissa of op2 */
-+ lsl r11, r9, 8
-+ sbr r11, 31 /* Set implicit bit. */
-+ lsr r9, 23
-+
-+ /* op2 is either zero or subnormal. */
-+ breq __avr32_f32_mul_op2_subnormal
-+0:
-+ /* Calculate new exponent */
-+ add r9,r10
-+
-+ /* Do the multiplication */
-+ mulu.d r10,r8,r11
-+
-+ /* We might need to scale up by two if the MSB of the result is
-+ zero. */
-+ lsl r8, r11, 1
-+ movcc r11, r8
-+ subcc r9, 1
-+
-+ /* Put the shifted out bits of the mantissa into r10 */
-+ lsr r10, 8
-+ bfins r10, r11, 24, 8
-+
-+ sub r9,(127-1) /* remove extra exponent bias */
-+ brle __avr32_f32_mul_res_subnormal
-+
-+ /* Check for Inf. */
-+ cp.w r9, 0xff
-+ brge 1f
-+
-+ /* Pack result. */
-+ or r12, r12, r11 >> 8
-+ bfins r12, r9, 23, 8
-+
-+ /* Round */
-+__avr32_f32_mul_round:
-+ mov r8, 0
-+ sbr r8, 31
-+ bld r12, 0
-+ subne r8, -1
-+
-+ cp.w r10, r8
-+ subhs r12, -1
-+
-+ ret r12
-+
-+1:
-+ /* Return Inf */
-+ orh r12, 0x7f80
-+ ret r12
-+
-+__avr32_f32_mul_op2_subnormal:
-+ cbr r11, 31
-+ clz r9, r11
-+ retcs 0 /* op2 is zero. Return 0 */
-+ lsl r11, r11, r9
-+ rsub r9, r9, 1
-+
-+ /* Check if op2 is subnormal. */
-+ tst r10, r10
-+ brne 0b
-+
-+ /* op2 is subnormal */
-+ cbr r8, 31
-+ clz r10, r11
-+ retcs 0 /* op1 is zero. Return 0 */
-+ lsl r8, r8, r10
-+ rsub r10, r10, 1
-+
-+ rjmp 0b
-+
-+
-+__avr32_f32_mul_op1_nan_or_inf:
-+ /* Check if op1 is NaN, if so return NaN */
-+ lsl r11, r8, 1
-+ retne -1
-+
-+ /* op1 is Inf. */
-+ tst r9, r9
-+ reteq -1 /* Inf * 0 -> NaN */
-+
-+ bfins r12, r10, 23, 8 /* Generate Inf in r12 */
-+
-+ /* Check if op2 is Inf. or NaN */
-+ lsr r11, r9, 23
-+ cp.w r11, 0xff
-+ retne r12 /* op2 not Inf or NaN, return Info */
-+
-+ lsl r9, 9
-+ reteq r12 /* op2 Inf return Inf */
-+ ret -1 /* op2 is NaN, return NaN */
-+
-+__avr32_f32_mul_res_subnormal:
-+ /* Check if the number is so small that
-+ it will be represented with zero. */
-+ rsub r9, r9, 9
-+ rsub r8, r9, 32
-+ retcs 0
-+
-+ /* Shift the mantissa into the correct position.*/
-+ lsr r9, r11, r9
-+ /* Add sign bit. */
-+ or r12, r9
-+ /* Put the shifted out bits in the most significant part
-+ of r8. */
-+ lsl r11, r11, r8
-+
-+ /* Add all the remainder bits used for rounding into r11 */
-+ andh r10, 0x00FF
-+ or r10, r11
-+ rjmp __avr32_f32_mul_round
-+
-+__avr32_f32_mul_op1_zero:
-+ bfextu r10, r11, 23, 8
-+ cp.w r10, 0xff
-+ retne r12
-+ reteq -1
-+
-+#endif
-+
-+
-+#ifdef L_avr32_s32_to_f32
-+ .global __avr32_s32_to_f32
-+ .type __avr32_s32_to_f32,@function
-+__avr32_s32_to_f32:
-+ cp r12, 0
-+ reteq r12 /* If zero then return zero float */
-+ mov r11, r12 /* Keep the sign */
-+ abs r12 /* Compute the absolute value */
-+ mov r10, 31 + 127 /* Set the correct exponent */
-+
-+ /* Normalize */
-+ normalize_sf r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/
-+
-+ /* Check for subnormal result */
-+ cp.w r10, 0
-+ brle __avr32_s32_to_f32_subnormal
-+
-+ round_sf r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/
-+ pack_sf r12 /*sf*/, r10 /*exp*/, r12 /*mant*/
-+ lsl r11, 1
-+ ror r12
-+ ret r12
-+
-+__avr32_s32_to_f32_subnormal:
-+ /* Adjust a subnormal result */
-+ adjust_subnormal_sf r12/*sf*/, r10 /*exp*/, r12 /*mant*/, r11/*sign*/, r9 /*scratch*/
-+ ret r12
-+
-+#endif
-+
-+#ifdef L_avr32_u32_to_f32
-+ .global __avr32_u32_to_f32
-+ .type __avr32_u32_to_f32,@function
-+__avr32_u32_to_f32:
-+ cp r12, 0
-+ reteq r12 /* If zero then return zero float */
-+ mov r10, 31 + 127 /* Set the correct exponent */
-+
-+ /* Normalize */
-+ normalize_sf r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/
-+
-+ /* Check for subnormal result */
-+ cp.w r10, 0
-+ brle __avr32_u32_to_f32_subnormal
-+
-+ round_sf r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/
-+ pack_sf r12 /*sf*/, r10 /*exp*/, r12 /*mant*/
-+ lsr r12,1 /* Sign bit is 0 for unsigned int */
-+ ret r12
-+
-+__avr32_u32_to_f32_subnormal:
-+ /* Adjust a subnormal result */
-+ mov r8, 0
-+ adjust_subnormal_sf r12/*sf*/,r10 /*exp*/, r12 /*mant*/,r8/*sign*/, r9 /*scratch*/
-+ ret r12
-+
-+
-+#endif
-+
-+
-+#ifdef L_avr32_f32_to_s32
-+ .global __avr32_f32_to_s32
-+ .type __avr32_f32_to_s32,@function
-+__avr32_f32_to_s32:
-+ bfextu r11, r12, 23, 8
-+ sub r11,127 /* Fix bias */
-+ retlo 0 /* Negative exponent yields zero integer */
-+
-+ /* Shift mantissa into correct position */
-+ rsub r11,r11,31 /* Shift amount */
-+ lsl r10,r12,8 /* Get mantissa */
-+ sbr r10,31 /* Add implicit bit */
-+ lsr r10,r10,r11 /* Perform shift */
-+ lsl r12,1 /* Check sign */
-+ retcc r10 /* if positive, we are done */
-+ neg r10 /* if negative float, negate result */
-+ ret r10
-+
-+#endif
-+
-+#ifdef L_avr32_f32_to_u32
-+ .global __avr32_f32_to_u32
-+ .type __avr32_f32_to_u32,@function
-+__avr32_f32_to_u32:
-+ cp r12,0
-+ retmi 0 /* Negative numbers gives 0 */
-+ bfextu r11, r12, 23, 8 /* Extract exponent */
-+ sub r11,127 /* Fix bias */
-+ retlo 0 /* Negative exponent yields zero integer */
-+
-+ /* Shift mantissa into correct position */
-+ rsub r11,r11,31 /* Shift amount */
-+ lsl r12,8 /* Get mantissa */
-+ sbr r12,31 /* Add implicit bit */
-+ lsr r12,r12,r11 /* Perform shift */
-+ ret r12
-+
-+#endif
-+
-+#ifdef L_avr32_f32_to_f64
-+ .global __avr32_f32_to_f64
-+ .type __avr32_f32_to_f64,@function
-+
-+__avr32_f32_to_f64:
-+ lsl r11,r12,1 /* Remove sign bit, keep original value in r12*/
-+ moveq r10, 0
-+ reteq r11 /* Return zero if input is zero */
-+
-+ bfextu r9,r11,24,8 /* Get exponent */
-+ cp.w r9,0xff /* check for NaN or inf */
-+ breq 0f
-+
-+ lsl r11,7 /* Convert sf mantissa to df format */
-+ mov r10,0
-+
-+ /* Check if implicit bit should be set */
-+ cp.w r9, 0
-+ subeq r9,-1 /* Adjust exponent if it was 0 */
-+ srne r8
-+ or r11, r11, r8 << 31 /* Set implicit bit if needed */
-+ sub r9,(127-0x3ff) /* Convert exponent to df format exponent */
-+
-+ /*We know that low register of mantissa is 0, and will be unaffected by normalization.*/
-+ /*We can therefore use the faster normalize_sf function instead of normalize_df.*/
-+ normalize_sf r9 /*exp*/, r11 /*mantissa*/, r8 /*scratch*/
-+ pack_df r9 /*exp*/, r10, r11 /*mantissa*/, r10, r11 /*df*/
-+
-+__extendsfdf_return_op1:
-+ /* Rotate in sign bit */
-+ lsl r12, 1
-+ ror r11
-+ ret r11
-+
-+0:
-+ /* Inf or NaN*/
-+ mov r10, 0
-+ orh r10, 0xffe0
-+ lsl r11,8 /* check mantissa */
-+ movne r11, -1 /* Return NaN */
-+ moveq r11, r10 /* Return inf */
-+ rjmp __extendsfdf_return_op1
-+#endif
-+
-+
-+#ifdef L_avr32_f64_to_f32
-+ .global __avr32_f64_to_f32
-+ .type __avr32_f64_to_f32,@function
-+
-+__avr32_f64_to_f32:
-+ /* Unpack */
-+ lsl r9,r11,1 /* Unpack exponent */
-+ lsr r9,21
-+
-+ reteq 0 /* If exponent is 0 the number is so small
-+ that the conversion to single float gives
-+ zero */
-+
-+ lsl r8,r11,10 /* Adjust mantissa */
-+ or r12,r8,r10>>22
-+
-+ lsl r10,10 /* Check if there are any remaining bits
-+ in the low part of the mantissa.*/
-+ neg r10
-+ rol r12 /* If there were remaining bits then set lsb
-+ of mantissa to 1 */
-+
-+ cp r9,0x7ff
-+ breq 2f /* Check for NaN or inf */
-+
-+ sub r9,(0x3ff-127) /* Adjust bias of exponent */
-+ sbr r12,31 /* set the implicit bit.*/
-+
-+ cp.w r9, 0 /* Check for subnormal number */
-+ brle 3f
-+
-+ round_sf r9 /*exp*/, r12 /*mant*/, r10 /*scratch*/
-+ pack_sf r12 /*sf*/, r9 /*exp*/, r12 /*mant*/
-+__truncdfsf_return_op1:
-+ /* Rotate in sign bit */
-+ lsl r11, 1
-+ ror r12
-+ ret r12
-+
-+2:
-+ /* NaN or inf */
-+ cbr r12,31 /* clear implicit bit */
-+ retne -1 /* Return NaN if mantissa not zero */
-+ mov r12, 0
-+ orh r12, 0xff00
-+ ret r12 /* Return inf */
-+
-+3: /* Result is subnormal. Adjust it.*/
-+ adjust_subnormal_sf r12/*sf*/,r9 /*exp*/, r12 /*mant*/, r11/*sign*/, r10 /*scratch*/
-+ ret r12
-+
-+
-+#endif
-+
-\ No newline at end of file
-Index: gcc-4.2.3/gcc/config/avr32/lib2funcs.S
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/lib2funcs.S 2008-05-21 13:45:54.173288052 +0200
-@@ -0,0 +1,21 @@
-+ .align 4
-+ .global __nonlocal_goto
-+ .type __nonlocal_goto,@function
-+
-+/* __nonlocal_goto: This function handles nonlocal_goto's in gcc.
-+
-+ parameter 0 (r12) = New Frame Pointer
-+ parameter 1 (r11) = Address to goto
-+ parameter 2 (r10) = New Stack Pointer
-+
-+ This function invalidates the return stack, since it returns from a
-+ function without using a return instruction.
-+*/
-+__nonlocal_goto:
-+ mov r7, r12
-+ mov sp, r10
-+ frs # Flush return stack
-+ mov pc, r11
-+
-+
-+
-Index: gcc-4.2.3/gcc/config/avr32/linux-elf.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/linux-elf.h 2008-05-21 13:45:54.173288052 +0200
-@@ -0,0 +1,156 @@
-+/*
-+ Linux/Elf specific definitions.
-+ Copyright 2003-2006 Atmel Corporation.
-+
-+ Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+ and H�vard Skinnemoen, Atmel Norway, <hskinnemoen@atmel.com>
-+
-+ This file is part of GCC.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+
-+/* elfos.h should have already been included. Now just override
-+ any conflicting definitions and add any extras. */
-+
-+/* Run-time Target Specification. */
-+#undef TARGET_VERSION
-+#define TARGET_VERSION fputs (" (AVR32 GNU/Linux with ELF)", stderr);
-+
-+/* Do not assume anything about header files. */
-+#define NO_IMPLICIT_EXTERN_C
-+
-+/* The GNU C++ standard library requires that these macros be defined. */
-+#undef CPLUSPLUS_CPP_SPEC
-+#define CPLUSPLUS_CPP_SPEC "-D_GNU_SOURCE %(cpp)"
-+
-+/* Now we define the strings used to build the spec file. */
-+#undef LIB_SPEC
-+#define LIB_SPEC \
-+ "%{pthread:-lpthread} \
-+ %{shared:-lc} \
-+ %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
-+
-+/* Provide a STARTFILE_SPEC appropriate for GNU/Linux. Here we add
-+ the GNU/Linux magical crtbegin.o file (see crtstuff.c) which
-+ provides part of the support for getting C++ file-scope static
-+ object constructed before entering `main'. */
-+
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC \
-+ "%{!shared: \
-+ %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} \
-+ %{!p:%{profile:gcrt1.o%s} \
-+ %{!profile:crt1.o%s}}}} \
-+ crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
-+
-+/* Provide a ENDFILE_SPEC appropriate for GNU/Linux. Here we tack on
-+ the GNU/Linux magical crtend.o file (see crtstuff.c) which
-+ provides part of the support for getting C++ file-scope static
-+ object constructed before entering `main', followed by a normal
-+ GNU/Linux "finalizer" file, `crtn.o'. */
-+
-+#undef ENDFILE_SPEC
-+#define ENDFILE_SPEC \
-+ "%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s"
-+
-+#undef ASM_SPEC
-+#define ASM_SPEC "%{!mno-pic:--pic} %{mrelax|O*:%{mno-relax|O0|O1: ;:--linkrelax}} %{mcpu=*:-mcpu=%*}"
-+
-+#undef LINK_SPEC
-+#define LINK_SPEC "%{version:-v} \
-+ %{static:-Bstatic} \
-+ %{shared:-shared} \
-+ %{symbolic:-Bsymbolic} \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0} \
-+ %{mrelax|O*:%{mno-relax|O0|O1: ;:--relax}}"
-+
-+#define TARGET_OS_CPP_BUILTINS() LINUX_TARGET_OS_CPP_BUILTINS()
-+
-+/* This is how we tell the assembler that two symbols have the same value. */
-+#define ASM_OUTPUT_DEF(FILE, NAME1, NAME2) \
-+ do \
-+ { \
-+ assemble_name (FILE, NAME1); \
-+ fputs (" = ", FILE); \
-+ assemble_name (FILE, NAME2); \
-+ fputc ('\n', FILE); \
-+ } \
-+ while (0)
-+
-+
-+
-+#undef CC1_SPEC
-+#define CC1_SPEC "%{profile:-p}"
-+
-+/* Target CPU builtins. */
-+#define TARGET_CPU_CPP_BUILTINS() \
-+ do \
-+ { \
-+ builtin_define ("__avr32__"); \
-+ builtin_define ("__AVR32__"); \
-+ builtin_define ("__AVR32_LINUX__"); \
-+ builtin_define (avr32_part->macro); \
-+ builtin_define (avr32_arch->macro); \
-+ if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A) \
-+ builtin_define ("__AVR32_AVR32A__"); \
-+ else \
-+ builtin_define ("__AVR32_AVR32B__"); \
-+ if (TARGET_UNALIGNED_WORD) \
-+ builtin_define ("__AVR32_HAS_UNALIGNED_WORD__"); \
-+ if (TARGET_SIMD) \
-+ builtin_define ("__AVR32_HAS_SIMD__"); \
-+ if (TARGET_DSP) \
-+ builtin_define ("__AVR32_HAS_DSP__"); \
-+ if (TARGET_RMW) \
-+ builtin_define ("__AVR32_HAS_RMW__"); \
-+ if (TARGET_BRANCH_PRED) \
-+ builtin_define ("__AVR32_HAS_BRANCH_PRED__"); \
-+ if (TARGET_FAST_FLOAT) \
-+ builtin_define ("__AVR32_FAST_FLOAT__"); \
-+ if (flag_pic) \
-+ { \
-+ builtin_define ("__PIC__"); \
-+ builtin_define ("__pic__"); \
-+ } \
-+ } \
-+ while (0)
-+
-+
-+
-+/* Call the function profiler with a given profile label. */
-+#undef FUNCTION_PROFILER
-+#define FUNCTION_PROFILER(STREAM, LABELNO) \
-+ do \
-+ { \
-+ fprintf (STREAM, "\tmov\tlr, lo(mcount)\n\torh\tlr, hi(mcount)\n"); \
-+ fprintf (STREAM, "\ticall lr\n"); \
-+ } \
-+ while (0)
-+
-+#define NO_PROFILE_COUNTERS 1
-+
-+/* For dynamic libraries to work */
-+/* #define PLT_REG_CALL_CLOBBERED 1 */
-+#define AVR32_ALWAYS_PIC 1
-+
-+/* uclibc does not implement sinf, cosf etc. */
-+#undef TARGET_C99_FUNCTIONS
-+#define TARGET_C99_FUNCTIONS 0
-+
-+#define LINK_GCC_C_SEQUENCE_SPEC \
-+ "%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}"
-Index: gcc-4.2.3/gcc/config/avr32/predicates.md
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/predicates.md 2008-05-21 13:45:54.173288052 +0200
-@@ -0,0 +1,331 @@
-+;; AVR32 predicates file.
-+;; Copyright 2003-2006 Atmel Corporation.
-+;;
-+;; Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;; This file is part of GCC.
-+;;
-+;; This program is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2 of the License, or
-+;; (at your option) any later version.
-+;;
-+;; This program is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with this program; if not, write to the Free Software
-+;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+
-+;; True if the operand is a memory reference which contains an
-+;; Address consisting of a single pointer register
-+(define_predicate "avr32_indirect_register_operand"
-+ (and (match_code "mem")
-+ (match_test "register_operand(XEXP(op, 0), SImode)")))
-+
-+
-+
-+;; Address expression with a base pointer offset with
-+;; a register displacement
-+(define_predicate "avr32_indexed_memory_operand"
-+ (and (match_code "mem")
-+ (match_test "GET_CODE(XEXP(op, 0)) == PLUS"))
-+ {
-+
-+ rtx op0 = XEXP(XEXP(op, 0), 0);
-+ rtx op1 = XEXP(XEXP(op, 0), 1);
-+
-+ return ((avr32_address_register_rtx_p (op0, 0)
-+ && avr32_legitimate_index_p (GET_MODE(op), op1, 0))
-+ || (avr32_address_register_rtx_p (op1, 0)
-+ && avr32_legitimate_index_p (GET_MODE(op), op0, 0)));
-+
-+ })
-+
-+;; Operand suitable for the ld.sb instruction
-+(define_predicate "load_sb_memory_operand"
-+ (ior (match_operand 0 "avr32_indirect_register_operand")
-+ (match_operand 0 "avr32_indexed_memory_operand")))
-+
-+
-+;; Operand suitable as operand to insns sign extending QI values
-+(define_predicate "extendqi_operand"
-+ (ior (match_operand 0 "load_sb_memory_operand")
-+ (match_operand 0 "register_operand")))
-+
-+(define_predicate "post_inc_memory_operand"
-+ (and (match_code "mem")
-+ (match_test "(GET_CODE(XEXP(op, 0)) == POST_INC)
-+ && REG_P(XEXP(XEXP(op, 0), 0))")))
-+
-+(define_predicate "pre_dec_memory_operand"
-+ (and (match_code "mem")
-+ (match_test "(GET_CODE(XEXP(op, 0)) == PRE_DEC)
-+ && REG_P(XEXP(XEXP(op, 0), 0))")))
-+
-+;; Operand suitable for add instructions
-+(define_predicate "avr32_add_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (and (match_operand 0 "immediate_operand")
-+ (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'I', \"Is21\")"))))
-+
-+;; Operand is a power of two immediate
-+(define_predicate "power_of_two_operand"
-+ (match_code "const_int")
-+{
-+ HOST_WIDE_INT value = INTVAL (op);
-+
-+ return value != 0 && (value & (value - 1)) == 0;
-+})
-+
-+;; Operand is a multiple of 8 immediate
-+(define_predicate "multiple_of_8_operand"
-+ (match_code "const_int")
-+{
-+ HOST_WIDE_INT value = INTVAL (op);
-+
-+ return (value & 0x7) == 0 ;
-+})
-+
-+;; Operand is a multiple of 16 immediate
-+(define_predicate "multiple_of_16_operand"
-+ (match_code "const_int")
-+{
-+ HOST_WIDE_INT value = INTVAL (op);
-+
-+ return (value & 0xf) == 0 ;
-+})
-+
-+;; Operand is a mask used for masking away upper bits of a reg
-+(define_predicate "avr32_mask_upper_bits_operand"
-+ (match_code "const_int")
-+{
-+ HOST_WIDE_INT value = INTVAL (op) + 1;
-+
-+ return value != 1 && value != 0 && (value & (value - 1)) == 0;
-+})
-+
-+
-+;; Operand suitable for mul instructions
-+(define_predicate "avr32_mul_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (and (match_operand 0 "immediate_operand")
-+ (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'K', \"Ks08\")"))))
-+
-+;; True for logical binary operators.
-+(define_predicate "logical_binary_operator"
-+ (match_code "ior,xor,and"))
-+
-+;; True for logical shift operators
-+(define_predicate "logical_shift_operator"
-+ (match_code "ashift,lshiftrt"))
-+
-+;; True for shift operand for logical and, or and eor insns
-+(define_predicate "avr32_logical_shift_operand"
-+ (and (match_code "ashift,lshiftrt")
-+ (ior (and (match_test "GET_CODE(XEXP(op, 1)) == CONST_INT")
-+ (match_test "register_operand(XEXP(op, 0), GET_MODE(XEXP(op, 0)))"))
-+ (and (match_test "GET_CODE(XEXP(op, 0)) == CONST_INT")
-+ (match_test "register_operand(XEXP(op, 1), GET_MODE(XEXP(op, 1)))"))))
-+ {
-+ return 1;
-+ }
-+ )
-+
-+
-+;; Predicate for second operand to and, ior and xor insn patterns
-+(define_predicate "avr32_logical_insn_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (match_operand 0 "avr32_logical_shift_operand"))
-+ {
-+ return 1;
-+ }
-+)
-+
-+
-+;; True for avr32 comparison operators
-+(define_predicate "avr32_comparison_operator"
-+ (ior (match_code "eq, ne, gt, ge, lt, le, gtu, geu, ltu, leu")
-+ (and (match_code "unspec")
-+ (match_test "(XINT(op, 1) == UNSPEC_COND_MI)
-+ || (XINT(op, 1) == UNSPEC_COND_PL)"))))
-+
-+;; True for avr32 comparison operand
-+(define_predicate "avr32_comparison_operand"
-+ (ior (and (match_code "eq, ne, gt, ge, lt, le, gtu, geu, ltu, leu")
-+ (match_test "(rtx_equal_p (XEXP(op,0), cc0_rtx) && rtx_equal_p (XEXP(op,1), const0_rtx))"))
-+ (and (match_code "unspec")
-+ (match_test "(XINT(op, 1) == UNSPEC_COND_MI)
-+ || (XINT(op, 1) == UNSPEC_COND_PL)"))))
-+
-+;; True if this is a const_int with one bit set
-+(define_predicate "one_bit_set_operand"
-+ (match_code "const_int")
-+ {
-+ int i;
-+ int value;
-+ int ones = 0;
-+
-+ value = INTVAL(op);
-+ for ( i = 0 ; i < 32; i++ ){
-+ if ( value & ( 1 << i ) ){
-+ ones++;
-+ }
-+ }
-+
-+ return ( ones == 1 );
-+ })
-+
-+
-+;; True if this is a const_int with one bit cleared
-+(define_predicate "one_bit_cleared_operand"
-+ (match_code "const_int")
-+ {
-+ int i;
-+ int value;
-+ int zeroes = 0;
-+
-+ value = INTVAL(op);
-+ for ( i = 0 ; i < 32; i++ ){
-+ if ( !(value & ( 1 << i )) ){
-+ zeroes++;
-+ }
-+ }
-+
-+ return ( zeroes == 1 );
-+ })
-+
-+
-+;; True if this is a register or immediate operand
-+(define_predicate "register_immediate_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (match_operand 0 "immediate_operand")))
-+
-+
-+;; True is this is an operand containing a label_ref
-+(define_predicate "avr32_label_ref_operand"
-+ (and (match_code "mem")
-+ (match_test "avr32_find_symbol(op)
-+ && (GET_CODE(avr32_find_symbol(op)) == LABEL_REF)")))
-+
-+;; True is this is a valid symbol pointing to the constant pool
-+(define_predicate "avr32_const_pool_operand"
-+ (and (match_code "symbol_ref")
-+ (match_test "CONSTANT_POOL_ADDRESS_P(op)"))
-+ {
-+ return (flag_pic ? (!(symbol_mentioned_p (get_pool_constant (op))
-+ || label_mentioned_p (get_pool_constant (op)))
-+ || avr32_got_mentioned_p(get_pool_constant (op)))
-+ : true);
-+ }
-+)
-+
-+;; True is this is a memory reference to the constant or mini pool
-+(define_predicate "avr32_const_pool_ref_operand"
-+ (ior (match_operand 0 "avr32_label_ref_operand")
-+ (and (match_code "mem")
-+ (match_test "avr32_const_pool_operand(XEXP(op,0), GET_MODE(XEXP(op,0)))"))))
-+
-+
-+;; Legal source operand for movti insns
-+(define_predicate "avr32_movti_src_operand"
-+ (ior (match_operand 0 "avr32_const_pool_ref_operand")
-+ (ior (ior (match_operand 0 "register_immediate_operand")
-+ (match_operand 0 "avr32_indirect_register_operand"))
-+ (match_operand 0 "post_inc_memory_operand"))))
-+
-+;; Legal destination operand for movti insns
-+(define_predicate "avr32_movti_dst_operand"
-+ (ior (ior (match_operand 0 "register_operand")
-+ (match_operand 0 "avr32_indirect_register_operand"))
-+ (match_operand 0 "pre_dec_memory_operand")))
-+
-+
-+;; True is this is a k12 offseted memory operand
-+(define_predicate "avr32_k12_memory_operand"
-+ (and (match_code "mem")
-+ (ior (match_test "REG_P(XEXP(op, 0))")
-+ (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+ && REG_P(XEXP(XEXP(op, 0), 0))
-+ && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)
-+ && (CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(XEXP(op, 0), 0)),
-+ 'K', (mode == SImode) ? \"Ks14\" : ((mode == HImode) ? \"Ks13\" : \"Ks12\")))"))))
-+
-+;; True is this is a memory operand with an immediate displacement
-+(define_predicate "avr32_imm_disp_memory_operand"
-+ (and (match_code "mem")
-+ (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+ && REG_P(XEXP(XEXP(op, 0), 0))
-+ && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)")))
-+
-+;; True is this is a bswap operand
-+(define_predicate "avr32_bswap_operand"
-+ (ior (match_operand 0 "avr32_k12_memory_operand")
-+ (match_operand 0 "register_operand")))
-+
-+;; True is this is a valid coprocessor insn memory operand
-+(define_predicate "avr32_cop_memory_operand"
-+ (and (match_operand 0 "memory_operand")
-+ (not (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+ && REG_P(XEXP(XEXP(op, 0), 0))
-+ && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)
-+ && !(CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(XEXP(op, 0), 0)), 'K', \"Ku10\"))"))))
-+
-+;; True is this is a valid source/destination operand
-+;; for moving values to/from a coprocessor
-+(define_predicate "avr32_cop_move_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (match_operand 0 "avr32_cop_memory_operand")))
-+
-+
-+;; True is this is a valid extract byte offset for use in
-+;; load extracted index insns
-+(define_predicate "avr32_extract_shift_operand"
-+ (and (match_operand 0 "const_int_operand")
-+ (match_test "(INTVAL(op) == 0) || (INTVAL(op) == 8)
-+ || (INTVAL(op) == 16) || (INTVAL(op) == 24)")))
-+
-+;; True is this is a floating-point register
-+(define_predicate "avr32_fp_register_operand"
-+ (and (match_operand 0 "register_operand")
-+ (match_test "REGNO_REG_CLASS(REGNO(op)) == FP_REGS")))
-+
-+;; True is this is valid avr32 symbol operand
-+(define_predicate "avr32_symbol_operand"
-+ (ior (match_code "label_ref, symbol_ref")
-+ (and (match_code "const")
-+ (match_test "avr32_find_symbol(op)"))))
-+
-+;; True is this is valid operand for the lda.w and call pseudo insns
-+(define_predicate "avr32_address_operand"
-+ (and (match_code "label_ref, symbol_ref")
-+ (ior (match_test "TARGET_HAS_ASM_ADDR_PSEUDOS")
-+ (match_test "flag_pic")) ))
-+
-+;; True if this is a avr32 call operand
-+(define_predicate "avr32_call_operand"
-+ (ior (ior (match_operand 0 "register_operand")
-+ (ior (match_operand 0 "avr32_const_pool_ref_operand")
-+ (match_operand 0 "avr32_address_operand")))
-+ (match_test "SYMBOL_REF_RCALL_FUNCTION_P(op)")))
-+
-+;; Return true for operators performing ALU operations
-+
-+(define_predicate "alu_operator"
-+ (match_code "ior, xor, and, plus, minus, ashift, lshiftrt, ashiftrt"))
-+
-+(define_predicate "avr32_add_shift_immediate_operand"
-+ (and (match_operand 0 "immediate_operand")
-+ (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'K', \"Ku02\")")))
-+
-+(define_predicate "avr32_cond_register_immediate_operand"
-+ (ior (match_operand 0 "register_operand")
-+ (and (match_operand 0 "immediate_operand")
-+ (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'K', \"Ks08\")"))))
-+
-+(define_predicate "avr32_cond_immediate_operand"
-+ (and (match_operand 0 "immediate_operand")
-+ (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'I', \"Is08\")")))
-Index: gcc-4.2.3/gcc/config/avr32/simd.md
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/simd.md 2008-05-21 13:45:54.173288052 +0200
-@@ -0,0 +1,145 @@
-+;; AVR32 machine description file for SIMD instructions.
-+;; Copyright 2003-2006 Atmel Corporation.
-+;;
-+;; Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;; This file is part of GCC.
-+;;
-+;; This program is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2 of the License, or
-+;; (at your option) any later version.
-+;;
-+;; This program is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with this program; if not, write to the Free Software
-+;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+
-+;; Vector modes
-+(define_mode_macro VECM [V2HI V4QI])
-+(define_mode_attr size [(V2HI "h") (V4QI "b")])
-+
-+(define_insn "add<mode>3"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (plus:VECM (match_operand:VECM 1 "register_operand" "r")
-+ (match_operand:VECM 2 "register_operand" "r")))]
-+ "TARGET_SIMD"
-+ "padd.<size>\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+
-+(define_insn "sub<mode>3"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (minus:VECM (match_operand:VECM 1 "register_operand" "r")
-+ (match_operand:VECM 2 "register_operand" "r")))]
-+ "TARGET_SIMD"
-+ "psub.<size>\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+
-+(define_insn "abs<mode>2"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (abs:VECM (match_operand:VECM 1 "register_operand" "r")))]
-+ "TARGET_SIMD"
-+ "pabs.s<size>\t%0, %1"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "ashl<mode>3"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (ashift:VECM (match_operand:VECM 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+ "TARGET_SIMD"
-+ "plsl.<size>\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "ashr<mode>3"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (ashiftrt:VECM (match_operand:VECM 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+ "TARGET_SIMD"
-+ "pasr.<size>\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "lshr<mode>3"
-+ [(set (match_operand:VECM 0 "register_operand" "=r")
-+ (lshiftrt:VECM (match_operand:VECM 1 "register_operand" "r")
-+ (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+ "TARGET_SIMD"
-+ "plsr.<size>\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "smaxv2hi3"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r")
-+ (smax:V2HI (match_operand:V2HI 1 "register_operand" "r")
-+ (match_operand:V2HI 2 "register_operand" "r")))]
-+
-+ "TARGET_SIMD"
-+ "pmax.sh\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "sminv2hi3"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r")
-+ (smin:V2HI (match_operand:V2HI 1 "register_operand" "r")
-+ (match_operand:V2HI 2 "register_operand" "r")))]
-+
-+ "TARGET_SIMD"
-+ "pmin.sh\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "umaxv4qi3"
-+ [(set (match_operand:V4QI 0 "register_operand" "=r")
-+ (umax:V4QI (match_operand:V4QI 1 "register_operand" "r")
-+ (match_operand:V4QI 2 "register_operand" "r")))]
-+
-+ "TARGET_SIMD"
-+ "pmax.ub\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "uminv4qi3"
-+ [(set (match_operand:V4QI 0 "register_operand" "=r")
-+ (umin:V4QI (match_operand:V4QI 1 "register_operand" "r")
-+ (match_operand:V4QI 2 "register_operand" "r")))]
-+
-+ "TARGET_SIMD"
-+ "pmin.ub\t%0, %1, %2"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+
-+(define_insn "addsubv2hi"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r")
-+ (vec_concat:V2HI
-+ (plus:HI (match_operand:HI 1 "register_operand" "r")
-+ (match_operand:HI 2 "register_operand" "r"))
-+ (minus:HI (match_dup 1) (match_dup 2))))]
-+ "TARGET_SIMD"
-+ "paddsub.h\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-+
-+(define_insn "subaddv2hi"
-+ [(set (match_operand:V2HI 0 "register_operand" "=r")
-+ (vec_concat:V2HI
-+ (minus:HI (match_operand:HI 1 "register_operand" "r")
-+ (match_operand:HI 2 "register_operand" "r"))
-+ (plus:HI (match_dup 1) (match_dup 2))))]
-+ "TARGET_SIMD"
-+ "psubadd.h\t%0, %1:b, %2:b"
-+ [(set_attr "length" "4")
-+ (set_attr "type" "alu")])
-Index: gcc-4.2.3/gcc/config/avr32/sync.md
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/sync.md 2008-05-21 13:45:54.177287723 +0200
-@@ -0,0 +1,175 @@
-+;;=================================================================
-+;; Atomic operations
-+;;=================================================================
-+
-+
-+(define_insn "sync_compare_and_swapsi"
-+ [(set (match_operand:SI 0 "register_operand" "=&r,&r")
-+ (match_operand:SI 1 "memory_operand" "+RKs16,+RKs16"))
-+ (set (match_dup 1)
-+ (unspec_volatile:SI
-+ [(match_dup 1)
-+ (match_operand:SI 2 "register_immediate_operand" "r,Ks21")
-+ (match_operand:SI 3 "register_operand" "r,r")]
-+ VUNSPEC_SYNC_CMPXCHG)) ]
-+ ""
-+ "0:
-+ ssrf\t5
-+ ld.w\t%0,%1
-+ cp.w\t%0,%2
-+ brne\t0f
-+ stcond\t%1, %3
-+ brne\t0b
-+ 0:
-+ "
-+ [(set_attr "length" "16,18")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+
-+(define_code_macro atomic_op [plus minus and ior xor])
-+(define_code_attr atomic_asm_insn [(plus "add") (minus "sub") (and "and") (ior "or") (xor "eor")])
-+(define_code_attr atomic_insn [(plus "add") (minus "sub") (and "and") (ior "ior") (xor "xor")])
-+
-+(define_insn "sync_loadsi"
-+ [(set (match_operand:SI 0 "register_operand" "=r")
-+ (unspec_volatile:SI
-+ [(match_operand:SI 1 "memory_operand" "RKs16")
-+ (label_ref (match_operand 2 "" ""))]
-+ VUNSPEC_SYNC_SET_LOCK_AND_LOAD) )]
-+ ""
-+ "%2:
-+ ssrf\t5
-+ ld.w\t%0,%1"
-+ [(set_attr "length" "6")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+(define_insn "sync_store_if_lock"
-+ [(set (match_operand:SI 0 "memory_operand" "=RKs16")
-+ (unspec_volatile:SI
-+ [(match_operand:SI 1 "register_operand" "r")
-+ (label_ref (match_operand 2 "" ""))]
-+ VUNSPEC_SYNC_STORE_IF_LOCK) )]
-+ ""
-+ "stcond\t%0, %1
-+ brne\t%2"
-+ [(set_attr "length" "6")
-+ (set_attr "cc" "clobber")]
-+ )
-+
-+
-+(define_expand "sync_<atomic_insn>si"
-+ [(set (match_dup 2)
-+ (unspec_volatile:SI
-+ [(match_operand:SI 0 "memory_operand" "")
-+ (match_dup 3)]
-+ VUNSPEC_SYNC_SET_LOCK_AND_LOAD))
-+ (set (match_dup 2)
-+ (atomic_op:SI (match_dup 2)
-+ (match_operand:SI 1 "register_immediate_operand" "")))
-+ (set (match_dup 0)
-+ (unspec_volatile:SI
-+ [(match_dup 2)
-+ (match_dup 3)]
-+ VUNSPEC_SYNC_STORE_IF_LOCK) )]
-+ ""
-+ {
-+ operands[2] = gen_reg_rtx (SImode);
-+ operands[3] = gen_rtx_LABEL_REF(Pmode, gen_label_rtx ());
-+ }
-+ )
-+
-+
-+
-+(define_expand "sync_old_<atomic_insn>si"
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (unspec_volatile:SI
-+ [(match_operand:SI 1 "memory_operand" "")
-+ (match_dup 4)]
-+ VUNSPEC_SYNC_SET_LOCK_AND_LOAD))
-+ (set (match_dup 3)
-+ (atomic_op:SI (match_dup 0)
-+ (match_operand:SI 2 "register_immediate_operand" "")))
-+ (set (match_dup 1)
-+ (unspec_volatile:SI
-+ [(match_dup 3)
-+ (match_dup 4)]
-+ VUNSPEC_SYNC_STORE_IF_LOCK) )]
-+ ""
-+ {
-+ operands[3] = gen_reg_rtx (SImode);
-+ operands[4] = gen_rtx_LABEL_REF(Pmode, gen_label_rtx ());
-+ }
-+ )
-+
-+(define_expand "sync_new_<atomic_insn>si"
-+ [(set (match_operand:SI 0 "register_operand" "")
-+ (unspec_volatile:SI
-+ [(match_operand:SI 1 "memory_operand" "")
-+ (match_dup 3)]
-+ VUNSPEC_SYNC_SET_LOCK_AND_LOAD))
-+ (set (match_dup 0)
-+ (atomic_op:SI (match_dup 0)
-+ (match_operand:SI 2 "register_immediate_operand" "")))
-+ (set (match_dup 1)
-+ (unspec_volatile:SI
-+ [(match_dup 0)
-+ (match_dup 3)]
-+ VUNSPEC_SYNC_STORE_IF_LOCK) )]
-+ ""
-+ {
-+ operands[3] = gen_rtx_LABEL_REF(Pmode, gen_label_rtx ());
-+ }
-+ )
-+
-+
-+;(define_insn "sync_<atomic_insn>si"
-+; [(set (match_operand:SI 0 "memory_operand" "+RKs16")
-+; (unspec_volatile:SI
-+; [(atomic_op:SI (match_dup 0)
-+; (match_operand:SI 1 "register_operand" "r"))]
-+; VUNSPEC_SYNC_CMPXCHG))
-+; (clobber (match_scratch:SI 2 "=&r"))]
-+; ""
-+; "0:
-+; ssrf\t5
-+; ld.w\t%2,%0
-+; <atomic_asm_insn>\t%2,%1
-+; stcond\t%0, %2
-+; brne\t0b
-+; "
-+; [(set_attr "length" "14")
-+; (set_attr "cc" "clobber")]
-+; )
-+;
-+;(define_insn "sync_new_<atomic_insn>si"
-+; [(set (match_operand:SI 1 "memory_operand" "+RKs16")
-+; (unspec_volatile:SI
-+; [(atomic_op:SI (match_dup 1)
-+; (match_operand:SI 2 "register_operand" "r"))]
-+; VUNSPEC_SYNC_CMPXCHG))
-+; (set (match_operand:SI 0 "register_operand" "=&r")
-+; (atomic_op:SI (match_dup 1)
-+; (match_dup 2)))]
-+; ""
-+; "0:
-+; ssrf\t5
-+; ld.w\t%0,%1
-+; <atomic_asm_insn>\t%0,%2
-+; stcond\t%1, %0
-+; brne\t0b
-+; "
-+; [(set_attr "length" "14")
-+; (set_attr "cc" "clobber")]
-+; )
-+
-+(define_insn "sync_lock_test_and_setsi"
-+ [ (set (match_operand:SI 0 "register_operand" "=&r")
-+ (match_operand:SI 1 "memory_operand" "+RKu00"))
-+ (set (match_dup 1)
-+ (match_operand:SI 2 "register_operand" "r")) ]
-+ ""
-+ "xchg\t%0, %p1, %2"
-+ [(set_attr "length" "4")]
-+ )
-Index: gcc-4.2.3/gcc/config/avr32/t-avr32
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/t-avr32 2008-05-21 13:45:54.177287723 +0200
-@@ -0,0 +1,76 @@
-+
-+MD_INCLUDES= $(srcdir)/config/avr32/avr32.md \
-+ $(srcdir)/config/avr32/sync.md \
-+ $(srcdir)/config/avr32/fpcp.md \
-+ $(srcdir)/config/avr32/simd.md \
-+ $(srcdir)/config/avr32/predicates.md
-+
-+s-config s-conditions s-flags s-codes s-constants s-emit s-recog s-preds \
-+ s-opinit s-extract s-peep s-attr s-attrtab s-output: $(MD_INCLUDES)
-+
-+# We want fine grained libraries, so use the new code
-+# to build the floating point emulation libraries.
-+FPBIT = fp-bit.c
-+DPBIT = dp-bit.c
-+
-+LIB1ASMSRC = avr32/lib1funcs.S
-+LIB1ASMFUNCS = _avr32_f64_mul _avr32_f64_addsub _avr32_f64_addsub_fast _avr32_f64_to_u32 \
-+ _avr32_f64_to_s32 _avr32_f64_to_u64 _avr32_f64_to_s64 _avr32_u32_to_f64 \
-+ _avr32_s32_to_f64 _avr32_f64_cmp_eq _avr32_f64_cmp_ge _avr32_f64_cmp_lt \
-+ _avr32_f32_cmp_eq _avr32_f32_cmp_ge _avr32_f32_cmp_lt _avr32_f64_div \
-+ _avr32_f32_div _avr32_f32_div_fast _avr32_f32_addsub _avr32_f32_addsub_fast \
-+ _avr32_f32_mul _avr32_s32_to_f32 _avr32_u32_to_f32 _avr32_f32_to_s32 \
-+ _avr32_f32_to_u32 _avr32_f32_to_f64 _avr32_f64_to_f32
-+
-+#LIB2FUNCS_EXTRA += $(srcdir)/config/avr32/lib2funcs.S
-+
-+MULTILIB_OPTIONS = march=ap/march=uc
-+MULTILIB_DIRNAMES = ap uc
-+MULTILIB_EXCEPTIONS =
-+MULTILIB_MATCHES = march?ap=mcpu?ap7000
-+MULTILIB_MATCHES += march?ap=mcpu?ap7010
-+MULTILIB_MATCHES += march?ap=mcpu?ap7020
-+MULTILIB_MATCHES += march?uc=mcpu?uc3a0256
-+MULTILIB_MATCHES += march?uc=mcpu?uc3a0512
-+MULTILIB_MATCHES += march?uc=mcpu?uc3a1128
-+MULTILIB_MATCHES += march?uc=mcpu?uc3a1256
-+MULTILIB_MATCHES += march?uc=mcpu?uc3a1512
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b064
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b0128
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b0256
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b164
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b1128
-+MULTILIB_MATCHES += march?uc=mcpu?uc3b1256
-+MULTILIB_MATCHES += march?ap=mpart?ap7000
-+MULTILIB_MATCHES += march?ap=mpart?ap7010
-+MULTILIB_MATCHES += march?ap=mpart?ap7020
-+MULTILIB_MATCHES += march?uc=mpart?uc3a0256
-+MULTILIB_MATCHES += march?uc=mpart?uc3a0512
-+MULTILIB_MATCHES += march?uc=mpart?uc3a1128
-+MULTILIB_MATCHES += march?uc=mpart?uc3a1256
-+MULTILIB_MATCHES += march?uc=mpart?uc3a1512
-+MULTILIB_MATCHES += march?uc=mpart?uc3b064
-+MULTILIB_MATCHES += march?uc=mpart?uc3b0128
-+MULTILIB_MATCHES += march?uc=mpart?uc3b0256
-+MULTILIB_MATCHES += march?uc=mpart?uc3b164
-+MULTILIB_MATCHES += march?uc=mpart?uc3b1128
-+MULTILIB_MATCHES += march?uc=mpart?uc3b1256
-+
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtbeginS.o crtend.o crtendS.o crti.o crtn.o
-+
-+CRTSTUFF_T_CFLAGS = -mrelax
-+CRTSTUFF_T_CFLAGS_S = -mrelax -fPIC
-+TARGET_LIBGCC2_CFLAGS += -mrelax
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
-+
-+fp-bit.c: $(srcdir)/config/fp-bit.c
-+ echo '#define FLOAT' > fp-bit.c
-+ cat $(srcdir)/config/fp-bit.c >> fp-bit.c
-+
-+dp-bit.c: $(srcdir)/config/fp-bit.c
-+ cat $(srcdir)/config/fp-bit.c > dp-bit.c
-+
-+
-+
-Index: gcc-4.2.3/gcc/config/avr32/t-elf
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/t-elf 2008-05-21 13:45:54.177287723 +0200
-@@ -0,0 +1,16 @@
-+
-+# Assemble startup files.
-+$(T)crti.o: $(srcdir)/config/avr32/crti.asm $(GCC_PASSES)
-+ $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) $(INCLUDES) \
-+ -c -o $(T)crti.o -x assembler-with-cpp $(srcdir)/config/avr32/crti.asm
-+
-+$(T)crtn.o: $(srcdir)/config/avr32/crtn.asm $(GCC_PASSES)
-+ $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) $(INCLUDES) \
-+ -c -o $(T)crtn.o -x assembler-with-cpp $(srcdir)/config/avr32/crtn.asm
-+
-+
-+# Build the libraries for both hard and soft floating point
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtbeginS.o crtend.o crtendS.o crti.o crtn.o
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
-Index: gcc-4.2.3/gcc/config/avr32/uclinux-elf.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ gcc-4.2.3/gcc/config/avr32/uclinux-elf.h 2008-05-21 13:45:54.177287723 +0200
-@@ -0,0 +1,20 @@
-+
-+/* Run-time Target Specification. */
-+#undef TARGET_VERSION
-+#define TARGET_VERSION fputs (" (AVR32 uClinux with ELF)", stderr)
-+
-+/* We don't want a .jcr section on uClinux. As if this makes a difference... */
-+#define TARGET_USE_JCR_SECTION 0
-+
-+/* Here we go. Drop the crtbegin/crtend stuff completely. */
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC \
-+ "%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s}" \
-+ " %{!p:%{profile:gcrt1.o%s}" \
-+ " %{!profile:crt1.o%s}}}} crti.o%s"
-+
-+#undef ENDFILE_SPEC
-+#define ENDFILE_SPEC "crtn.o%s"
-+
-+#undef TARGET_DEFAULT
-+#define TARGET_DEFAULT (AVR32_FLAG_NO_INIT_GOT)
-Index: gcc-4.2.3/gcc/config/host-linux.c
-===================================================================
---- gcc-4.2.3.orig/gcc/config/host-linux.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/config/host-linux.c 2008-05-21 13:45:54.177287723 +0200
-@@ -25,6 +25,9 @@
- #include "hosthooks.h"
- #include "hosthooks-def.h"
-
-+#ifndef SSIZE_MAX
-+#define SSIZE_MAX LONG_MAX
-+#endif
-
- /* Linux has a feature called exec-shield-randomize that perturbs the
- address of non-fixed mapped segments by a (relatively) small amount.
-Index: gcc-4.2.3/gcc/config.gcc
-===================================================================
---- gcc-4.2.3.orig/gcc/config.gcc 2008-05-21 13:45:53.353287795 +0200
-+++ gcc-4.2.3/gcc/config.gcc 2008-05-21 13:45:54.181287953 +0200
-@@ -790,6 +790,24 @@
- tm_file="avr/avr.h dbxelf.h"
- use_fixproto=yes
- ;;
-+avr32*-*-linux*)
-+ tm_file="dbxelf.h elfos.h linux.h avr32/linux-elf.h avr32/avr32.h "
-+ tmake_file="t-linux avr32/t-avr32 avr32/t-elf"
-+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+ extra_modes=avr32/avr32-modes.def
-+ gnu_ld=yes
-+ ;;
-+avr32*-*-uclinux*)
-+ tm_file="dbxelf.h elfos.h linux.h avr32/linux-elf.h avr32/uclinux-elf.h avr32/avr32.h"
-+ tmake_file="t-linux avr32/t-avr32 avr32/t-elf"
-+ extra_modes=avr32/avr32-modes.def
-+ gnu_ld=yes
-+ ;;
-+avr32-*-*)
-+ tm_file="dbxelf.h elfos.h avr32/avr32.h avr32/avr32-elf.h"
-+ tmake_file="avr32/t-avr32 avr32/t-elf"
-+ extra_modes=avr32/avr32-modes.def
-+ ;;
- bfin*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
- tmake_file=bfin/t-bfin-elf
-@@ -1690,6 +1708,9 @@
- pdp11-*-*)
- use_fixproto=yes
- ;;
-+avr-*-*)
-+ use_fixproto=yes
-+ ;;
- # port not yet contributed
- #powerpc-*-openbsd*)
- # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
-@@ -2726,6 +2747,32 @@
- fi
- ;;
-
-+ avr32*-*-*)
-+ supported_defaults="part arch"
-+
-+ case "$with_part" in
-+ "" \
-+ | "ap7000" | "ap7010" | "ap7020" | "uc3a0256" | "uc3a0512" | "uc3a1128" | "uc3a1256" | "uc3a1512" )
-+ # OK
-+ ;;
-+ *)
-+ echo "Unknown part used in --with-part=$with_part" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+
-+ case "$with_arch" in
-+ "" \
-+ | "ap" | "uc")
-+ # OK
-+ ;;
-+ *)
-+ echo "Unknown arch used in --with-arch=$with_arch" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ ;;
-+
- fr*-*-*linux*)
- supported_defaults=cpu
- case "$with_cpu" in
-Index: gcc-4.2.3/gcc/doc/extend.texi
-===================================================================
---- gcc-4.2.3.orig/gcc/doc/extend.texi 2008-02-01 02:40:49.000000000 +0100
-+++ gcc-4.2.3/gcc/doc/extend.texi 2008-05-21 13:45:54.222289824 +0200
-@@ -1981,7 +1981,7 @@
-
- @item interrupt
- @cindex interrupt handler functions
--Use this attribute on the ARM, AVR, C4x, CRX, M32C, M32R/D, MS1, and Xstormy16
-+Use this attribute on the ARM, AVR, AVR32, C4x, CRX, M32C, M32R/D, MS1, and Xstormy16
- ports to indicate that the specified function is an interrupt handler.
- The compiler will generate function entry and exit sequences suitable
- for use in an interrupt handler when this attribute is present.
-@@ -2000,6 +2000,15 @@
-
- Permissible values for this parameter are: IRQ, FIQ, SWI, ABORT and UNDEF@.
-
-+Note, for the AVR32, you can specify which banking scheme is used for
-+the interrupt mode this interrupt handler is used in like this:
-+
-+@smallexample
-+void f () __attribute__ ((interrupt ("FULL")));
-+@end smallexample
-+
-+Permissible values for this parameter are: FULL, HALF, NONE and UNDEF.
-+
- @item interrupt_handler
- @cindex interrupt handler functions on the Blackfin, m68k, H8/300 and SH processors
- Use this attribute on the Blackfin, m68k, H8/300, H8/300H, H8S, and SH to
-@@ -6175,6 +6184,7 @@
- @menu
- * Alpha Built-in Functions::
- * ARM Built-in Functions::
-+* AVR32 Built-in Functions::
- * Blackfin Built-in Functions::
- * FR-V Built-in Functions::
- * X86 Built-in Functions::
-@@ -6413,6 +6423,54 @@
- long long __builtin_arm_wzero ()
- @end smallexample
-
-+@node AVR32 Built-in Functions
-+@subsection AVR32 Built-in Functions
-+
-+
-+@smallexample
-+
-+int __builtin_sats (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satu (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satrnds (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satrndu (int /*Rd*/,int /*sa*/, int /*bn*/)
-+short __builtin_mulsathh_h (short, short)
-+int __builtin_mulsathh_w (short, short)
-+short __builtin_mulsatrndhh_h (short, short)
-+int __builtin_mulsatrndwh_w (int, short)
-+int __builtin_mulsatwh_w (int, short)
-+int __builtin_macsathh_w (int, short, short)
-+short __builtin_satadd_h (short, short)
-+short __builtin_satsub_h (short, short)
-+int __builtin_satadd_w (int, int)
-+int __builtin_satsub_w (int, int)
-+long long __builtin_mulwh_d(int, short)
-+long long __builtin_mulnwh_d(int, short)
-+long long __builtin_macwh_d(long long, int, short)
-+long long __builtin_machh_d(long long, short, short)
-+
-+void __builtin_musfr(int);
-+int __builtin_mustr(void);
-+int __builtin_mfsr(int /*Status Register Address*/)
-+void __builtin_mtsr(int /*Status Register Address*/, int /*Value*/)
-+int __builtin_mfdr(int /*Debug Register Address*/)
-+void __builtin_mtdr(int /*Debug Register Address*/, int /*Value*/)
-+void __builtin_cache(void * /*Address*/, int /*Cache Operation*/)
-+void __builtin_sync(int /*Sync Operation*/)
-+void __builtin_tlbr(void)
-+void __builtin_tlbs(void)
-+void __builtin_tlbw(void)
-+void __builtin_breakpoint(void)
-+int __builtin_xchg(void * /*Address*/, int /*Value*/ )
-+short __builtin_bswap_16(short)
-+int __builtin_bswap_32(int)
-+void __builtin_cop(int/*cpnr*/, int/*crd*/, int/*crx*/, int/*cry*/, int/*op*/)
-+int __builtin_mvcr_w(int/*cpnr*/, int/*crs*/)
-+void __builtin_mvrc_w(int/*cpnr*/, int/*crd*/, int/*value*/)
-+long long __builtin_mvcr_d(int/*cpnr*/, int/*crs*/)
-+void __builtin_mvrc_d(int/*cpnr*/, int/*crd*/, long long/*value*/)
-+
-+@end smallexample
-+
- @node Blackfin Built-in Functions
- @subsection Blackfin Built-in Functions
-
-Index: gcc-4.2.3/gcc/doc/invoke.texi
-===================================================================
---- gcc-4.2.3.orig/gcc/doc/invoke.texi 2008-01-31 19:40:58.000000000 +0100
-+++ gcc-4.2.3/gcc/doc/invoke.texi 2008-05-21 13:45:54.274288067 +0200
-@@ -190,7 +190,7 @@
- -fno-default-inline -fvisibility-inlines-hidden @gol
- -Wabi -Wctor-dtor-privacy @gol
- -Wnon-virtual-dtor -Wreorder @gol
---Weffc++ -Wno-deprecated -Wstrict-null-sentinel @gol
-+-Weffc++ -Wno-deprecated @gol
- -Wno-non-template-friend -Wold-style-cast @gol
- -Woverloaded-virtual -Wno-pmf-conversions @gol
- -Wsign-promo}
-@@ -590,6 +590,12 @@
- -mauto-incdec -minmax -mlong-calls -mshort @gol
- -msoft-reg-count=@var{count}}
-
-+@emph{AVR32 Options}
-+@gccoptlist{-muse-rodata-section -mhard-float -msoft-float -mrelax @gol
-+-mforce-double-align -mno-init-got -mpart=@var{part} -mcpu=@var{cpu} @gol
-+-march=@var{arch} -mfast-float -masm-addr-pseudos -mno-asm-addr-pseudos -mno-pic
-+}
-+
- @emph{MCore Options}
- @gccoptlist{-mhardlit -mno-hardlit -mdiv -mno-div -mrelax-immediates @gol
- -mno-relax-immediates -mwide-bitfields -mno-wide-bitfields @gol
-@@ -1869,14 +1875,6 @@
- @opindex Wno-deprecated
- Do not warn about usage of deprecated features. @xref{Deprecated Features}.
-
--@item -Wstrict-null-sentinel @r{(C++ only)}
--@opindex Wstrict-null-sentinel
--Warn also about the use of an uncasted @code{NULL} as sentinel. When
--compiling only with GCC this is a valid sentinel, as @code{NULL} is defined
--to @code{__null}. Although it is a null pointer constant not a null pointer,
--it is guaranteed to of the same size as a pointer. But this use is
--not portable across different compilers.
--
- @item -Wno-non-template-friend @r{(C++ only)}
- @opindex Wno-non-template-friend
- Disable warnings when non-templatized friend functions are declared
-@@ -2733,13 +2731,11 @@
- If you want to warn about code which uses the uninitialized value of the
- variable in its own initializer, use the @option{-Winit-self} option.
-
--These warnings occur for individual uninitialized or clobbered
--elements of structure, union or array variables as well as for
--variables which are uninitialized or clobbered as a whole. They do
--not occur for variables or elements declared @code{volatile}. Because
--these warnings depend on optimization, the exact variables or elements
--for which there are warnings will depend on the precise optimization
--options and version of GCC used.
-+These warnings occur only for variables that are candidates for
-+register allocation. Therefore, they do not occur for a variable that
-+is declared @code{volatile}, or whose address is taken, or whose size
-+is other than 1, 2, 4 or 8 bytes. Also, they do not occur for
-+structures, unions or arrays, even when they are in registers.
-
- Note that there may be no warning about a variable that is used only
- to compute a value that itself is never used, because such
-@@ -6228,10 +6224,6 @@
- we always try to remove unnecessary ivs from the set during its
- optimization when a new iv is added to the set.
-
--@item scev-max-expr-size
--Bound on size of expressions used in the scalar evolutions analyzer.
--Large expressions slow the analyzer.
--
- @item vect-max-version-checks
- The maximum number of runtime checks that can be performed when doing
- loop versioning in the vectorizer. See option ftree-vect-loop-version
-@@ -7429,7 +7421,7 @@
- * ARC Options::
- * ARM Options::
- * AVR Options::
--* Blackfin Options::
-+* AVR32 Options::
- * CRIS Options::
- * CRX Options::
- * Darwin Options::
-@@ -7894,81 +7886,68 @@
- size.
- @end table
-
--@node Blackfin Options
--@subsection Blackfin Options
--@cindex Blackfin Options
-+@node AVR32 Options
-+@subsection AVR32 Options
-+@cindex AVR32 Options
-+
-+These options are defined for AVR32 implementations:
-
- @table @gcctabopt
--@item -momit-leaf-frame-pointer
--@opindex momit-leaf-frame-pointer
--Don't keep the frame pointer in a register for leaf functions. This
--avoids the instructions to save, set up and restore frame pointers and
--makes an extra register available in leaf functions. The option
--@option{-fomit-frame-pointer} removes the frame pointer for all functions
--which might make debugging harder.
-+@item -muse-rodata-section
-+@opindex muse-rodata-section
-+Use section @samp{.rodata} for read-only data instead of @samp{.text}.
-
--@item -mspecld-anomaly
--@opindex mspecld-anomaly
--When enabled, the compiler will ensure that the generated code does not
--contain speculative loads after jump instructions. This option is enabled
--by default.
--
--@item -mno-specld-anomaly
--@opindex mno-specld-anomaly
--Don't generate extra code to prevent speculative loads from occurring.
--
--@item -mcsync-anomaly
--@opindex mcsync-anomaly
--When enabled, the compiler will ensure that the generated code does not
--contain CSYNC or SSYNC instructions too soon after conditional branches.
--This option is enabled by default.
--
--@item -mno-csync-anomaly
--@opindex mno-csync-anomaly
--Don't generate extra code to prevent CSYNC or SSYNC instructions from
--occurring too soon after a conditional branch.
--
--@item -mlow-64k
--@opindex mlow-64k
--When enabled, the compiler is free to take advantage of the knowledge that
--the entire program fits into the low 64k of memory.
--
--@item -mno-low-64k
--@opindex mno-low-64k
--Assume that the program is arbitrarily large. This is the default.
-+@item -mrelax
-+@opindex mrelax
-+Enable relaxing in linker. This means that when the address of symbols
-+are known at link time, the linker can optimize @samp{icall} and @samp{mcall}
-+instructions into a @samp{rcall} instruction if possible. Loading the address
-+of a symbol can also be optimized.
-+
-+@item -mforce-double-align
-+@opindex mforce-double-align
-+Force double-word alignment for double-word memory accesses.
-+
-+@item -mno-init-got
-+@opindex mno-init-got
-+Do not initialize the GOT register before using it when compiling PIC
-+code.
-
--@item -mid-shared-library
--@opindex mid-shared-library
--Generate code that supports shared libraries via the library ID method.
--This allows for execute in place and shared libraries in an environment
--without virtual memory management. This option implies @option{-fPIC}.
-+@item -mno-pic
-+@opindex mno-pic
-+Do not emit position-independent code (will break dynamic linking.)
-
--@item -mno-id-shared-library
--@opindex mno-id-shared-library
--Generate code that doesn't assume ID based shared libraries are being used.
--This is the default.
-+@item -masm-addr-pseudos
-+@opindex masm-addr-pseudos
-+Use assembler pseudo-instructions lda.w and call for handling direct
-+addresses. (Enabled by default)
-+
-+@item -mno-asm-addr-pseudos
-+@opindex mno-asm-addr-pseudos
-+Do not use assembler pseudo-instructions lda.w and call for handling direct addresses.
-+
-+@item -mpart=@var{part}
-+@opindex mpart
-+Generate code for the specified part. Permissible parts are: @samp{ap7000},
-+@samp{ap7010},@samp{ap7020},@samp{uc3a0256}, @samp{uc3a0512},
-+@samp{uc3a1128}, @samp{uc3a1256}, @samp{uc3a1512}.
-
--@item -mshared-library-id=n
--@opindex mshared-library-id
--Specified the identification number of the ID based shared library being
--compiled. Specifying a value of 0 will generate more compact code, specifying
--other values will force the allocation of that number to the current
--library but is no more space or time efficient than omitting this option.
-+@item -mcpu=@var{cpu-type}
-+@opindex mcpu
-+Same as -mpart. Obsolete.
-+
-+@item -march=@var{arch}
-+@opindex march
-+Generate code for the specified architecture. Permissible architectures are:
-+@samp{ap} and @samp{uc}.
-+
-+@item -mfast-float
-+@opindex mfast-float
-+Enable fast floating-point library that does not conform to ieee but is still good enough
-+for most applications. The fast floating-point library does not round to the nearest even
-+but away from zero. Enabled by default if the -funsafe-math-optimizations switch is specified.
-
--@item -mlong-calls
--@itemx -mno-long-calls
--@opindex mlong-calls
--@opindex mno-long-calls
--Tells the compiler to perform function calls by first loading the
--address of the function into a register and then performing a subroutine
--call on this register. This switch is needed if the target function
--will lie outside of the 24 bit addressing range of the offset based
--version of subroutine call instruction.
-
--This feature is not enabled by default. Specifying
--@option{-mno-long-calls} will restore the default behavior. Note these
--switches have no effect on how the compiler generates code to handle
--function calls via function pointers.
- @end table
-
- @node CRIS Options
-@@ -11879,6 +11858,7 @@
- Application Binary Interface, PowerPC processor supplement. This is the
- default unless you configured GCC using @samp{powerpc-*-eabiaix}.
-
-+
- @item -mcall-sysv-eabi
- @opindex mcall-sysv-eabi
- Specify both @option{-mcall-sysv} and @option{-meabi} options.
-@@ -14181,4 +14161,4 @@
- exist, because otherwise they won't get converted.
-
- @xref{Protoize Caveats}, for more information on how to use
--@code{protoize} successfully.
-+@code{protoize} successfully.
-\ No newline at end of file
-Index: gcc-4.2.3/gcc/doc/md.texi
-===================================================================
---- gcc-4.2.3.orig/gcc/doc/md.texi 2007-04-04 03:24:10.000000000 +0200
-+++ gcc-4.2.3/gcc/doc/md.texi 2008-05-21 13:45:54.302287723 +0200
-@@ -3,6 +3,7 @@
- @c This is part of the GCC manual.
- @c For copying conditions, see the file gcc.texi.
-
-+
- @ifset INTERNALS
- @node Machine Desc
- @chapter Machine Descriptions
-@@ -1681,6 +1682,58 @@
- A memory reference suitable for the ARMv4 ldrsb instruction.
- @end table
-
-+@item AVR32 family---@file{avr32.h}
-+@table @code
-+@item f
-+Floating-point registers (f0 to f15)
-+
-+@item Ku@var{bits}
-+Unsigned constant representable with @var{bits} number of bits (Must be
-+two digits). I.e: An unsigned 8-bit constant is written as @samp{Ku08}
-+
-+@item Ks@var{bits}
-+Signed constant representable with @var{bits} number of bits (Must be
-+two digits). I.e: A signed 12-bit constant is written as @samp{Ks12}
-+
-+@item Is@var{bits}
-+The negated range of a signed constant representable with @var{bits}
-+number of bits. The same as @samp{Ks@var{bits}} with a negated range.
-+This means that the constant must be in the range @math{-2^{bits-1}-1} to @math{2^{bits-1}}
-+
-+@item G
-+A single/double precision floating-point immediate or 64-bit integer
-+immediate where the least and most significant words both can be
-+loaded with a move instruction. That is the the integer form of the
-+values in the least and most significant words both are in the range
-+@math{-2^{20}} to @math{2^{20}-1}.
-+
-+@item RKs@var{bits}
-+A memory reference where the address consists of a base register
-+plus a signed immediate displacement with range given by @samp{Ks@var{bits}}
-+which has the same format as for the signed immediate integer constraint
-+given above.
-+
-+@item RKu@var{bits}
-+A memory reference where the address consists of a base register
-+plus an unsigned immediate displacement with range given by @samp{Ku@var{bits}}
-+which has the same format as for the unsigned immediate integer constraint
-+given above.
-+
-+@item S
-+A memory reference with an immediate or register offset
-+
-+@item T
-+A memory reference to a constant pool entry
-+
-+@item W
-+A valid operand for use in the @samp{lda.w} instruction macro when
-+relaxing is enabled
-+
-+@item Z
-+A memory reference valid for coprocessor memory instructions
-+
-+@end table
-+
- @item AVR family---@file{config/avr/constraints.md}
- @table @code
- @item l
-Index: gcc-4.2.3/gcc/expmed.c
-===================================================================
---- gcc-4.2.3.orig/gcc/expmed.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/expmed.c 2008-05-21 13:45:54.306288512 +0200
-@@ -36,6 +36,7 @@
- #include "real.h"
- #include "recog.h"
- #include "langhooks.h"
-+#include "target.h"
-
- static void store_fixed_bit_field (rtx, unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT,
-@@ -454,9 +455,18 @@
- ? ((GET_MODE_SIZE (fieldmode) >= UNITS_PER_WORD
- || GET_MODE_SIZE (GET_MODE (op0)) == GET_MODE_SIZE (fieldmode))
- && byte_offset % GET_MODE_SIZE (fieldmode) == 0)
-- : (! SLOW_UNALIGNED_ACCESS (fieldmode, MEM_ALIGN (op0))
-- || (offset * BITS_PER_UNIT % bitsize == 0
-- && MEM_ALIGN (op0) % GET_MODE_BITSIZE (fieldmode) == 0))))
-+ : (
-+
-+ /* NB! Added for AVR32, and I think this should be true for
-+ all targets not using narrow volatile bitfields. If the
-+ bitfield is volatile then we need to perform an access
-+ consistent with the container type. */
-+ !(MEM_VOLATILE_P (op0)
-+ && GET_MODE_BITSIZE (GET_MODE (op0)) != bitsize
-+ && !targetm.narrow_volatile_bitfield ())
-+ && (! SLOW_UNALIGNED_ACCESS (fieldmode, MEM_ALIGN (op0))
-+ || (offset * BITS_PER_UNIT % bitsize == 0
-+ && MEM_ALIGN (op0) % GET_MODE_BITSIZE (fieldmode) == 0)))))
- {
- if (MEM_P (op0))
- op0 = adjust_address (op0, fieldmode, offset);
-@@ -1256,6 +1266,13 @@
- && GET_MODE_SIZE (mode1) != 0
- && byte_offset % GET_MODE_SIZE (mode1) == 0)
- || (MEM_P (op0)
-+ /* NB! Added for AVR32, and I think this should be true for
-+ all targets not using narrow volatile bitfields. If the
-+ bitfield is volatile then we need to perform an access
-+ consistent with the container type. */
-+ && !(MEM_VOLATILE_P (op0)
-+ && GET_MODE_BITSIZE (GET_MODE (op0)) != bitsize
-+ && !targetm.narrow_volatile_bitfield ())
- && (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (op0))
- || (offset * BITS_PER_UNIT % bitsize == 0
- && MEM_ALIGN (op0) % bitsize == 0)))))
-Index: gcc-4.2.3/gcc/expr.c
-===================================================================
---- gcc-4.2.3.orig/gcc/expr.c 2008-01-22 20:39:39.000000000 +0100
-+++ gcc-4.2.3/gcc/expr.c 2008-05-21 13:45:54.330288217 +0200
-@@ -3549,18 +3549,19 @@
- }
- else
- {
-+ emit_move_insn (stack_pointer_rtx,
-+ expand_binop (Pmode,
- #ifdef STACK_GROWS_DOWNWARD
-- /* ??? This seems wrong if STACK_PUSH_CODE == POST_DEC. */
-- dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
-- GEN_INT (-(HOST_WIDE_INT) rounded_size));
-+ sub_optab,
- #else
-- /* ??? This seems wrong if STACK_PUSH_CODE == POST_INC. */
-- dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
-- GEN_INT (rounded_size));
-+ add_optab,
- #endif
-- dest_addr = gen_rtx_PRE_MODIFY (Pmode, stack_pointer_rtx, dest_addr);
-+ stack_pointer_rtx,
-+ GEN_INT (rounded_size),
-+ NULL_RTX, 0, OPTAB_LIB_WIDEN));
-+ dest_addr = stack_pointer_rtx;
- }
--
-+
- dest = gen_rtx_MEM (mode, dest_addr);
-
- if (type != 0)
-@@ -5539,7 +5540,16 @@
- is a bit field, we cannot use addressing to access it.
- Use bit-field techniques or SUBREG to store in it. */
-
-- if (mode == VOIDmode
-+ if (
-+ /* NB! Added for AVR32, and I think this should be true for
-+ all targets not using narrow volatile bitfields. If the
-+ bitfield is volatile then we need to perform an access
-+ consistent with the container type. */
-+ (MEM_P (target)
-+ && MEM_VOLATILE_P (target)
-+ && GET_MODE_BITSIZE (GET_MODE (target)) > bitsize
-+ && !targetm.narrow_volatile_bitfield ())
-+ || mode == VOIDmode
- || (mode != BLKmode && ! direct_store[(int) mode]
- && GET_MODE_CLASS (mode) != MODE_COMPLEX_INT
- && GET_MODE_CLASS (mode) != MODE_COMPLEX_FLOAT)
-@@ -7590,7 +7600,16 @@
- by doing the extract into an object as wide as the field
- (which we know to be the width of a basic mode), then
- storing into memory, and changing the mode to BLKmode. */
-- if (mode1 == VOIDmode
-+ if (
-+ /* NB! Added for AVR32, and I think this should be true for
-+ all targets not using narrow volatile bitfields. If the
-+ bitfield is volatile then we need to perform an access
-+ consistent with the container type. */
-+ (MEM_P (op0)
-+ && MEM_VOLATILE_P (op0)
-+ && GET_MODE_BITSIZE (GET_MODE (op0)) > bitsize
-+ && !targetm.narrow_volatile_bitfield ())
-+ || mode1 == VOIDmode
- || REG_P (op0) || GET_CODE (op0) == SUBREG
- || (mode1 != BLKmode && ! direct_load[(int) mode1]
- && GET_MODE_CLASS (mode) != MODE_COMPLEX_INT
-Index: gcc-4.2.3/gcc/function.c
-===================================================================
---- gcc-4.2.3.orig/gcc/function.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/function.c 2008-05-21 13:45:54.334287888 +0200
-@@ -2676,8 +2676,12 @@
- SET_DECL_RTL (parm, parmreg);
-
- /* Copy the value into the register. */
-- if (data->nominal_mode != data->passed_mode
-- || promoted_nominal_mode != data->promoted_mode)
-+ if ( (data->nominal_mode != data->passed_mode
-+ /* Added for AVR32: If passed_mode is equal
-+ to promoted nominal mode why should be convert?
-+ The conversion should make no difference. */
-+ && data->passed_mode != promoted_nominal_mode)
-+ || promoted_nominal_mode != data->promoted_mode)
- {
- int save_tree_used;
-
-Index: gcc-4.2.3/gcc/genemit.c
-===================================================================
---- gcc-4.2.3.orig/gcc/genemit.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/genemit.c 2008-05-21 13:45:54.342288908 +0200
-@@ -121,6 +121,24 @@
- }
- \f
- static void
-+gen_vararg_prologue(int operands)
-+{
-+ int i;
-+
-+ if (operands > 1)
-+ {
-+ for (i = 1; i < operands; i++)
-+ printf(" rtx operand%d ATTRIBUTE_UNUSED;\n", i);
-+
-+ printf(" va_list args;\n\n");
-+ printf(" va_start(args, operand0);\n");
-+ for (i = 1; i < operands; i++)
-+ printf(" operand%d = va_arg(args, rtx);\n", i);
-+ printf(" va_end(args);\n\n");
-+ }
-+}
-+
-+static void
- print_code (RTX_CODE code)
- {
- const char *p1;
-@@ -405,18 +423,16 @@
- fatal ("match_dup operand number has no match_operand");
-
- /* Output the function name and argument declarations. */
-- printf ("rtx\ngen_%s (", XSTR (insn, 0));
-+ printf ("rtx\ngen_%s ", XSTR (insn, 0));
-+
- if (operands)
-- for (i = 0; i < operands; i++)
-- if (i)
-- printf (",\n\trtx operand%d ATTRIBUTE_UNUSED", i);
-- else
-- printf ("rtx operand%d ATTRIBUTE_UNUSED", i);
-+ printf("(rtx operand0 ATTRIBUTE_UNUSED, ...)\n");
- else
-- printf ("void");
-- printf (")\n");
-+ printf("(void)\n");
- printf ("{\n");
-
-+ gen_vararg_prologue(operands);
-+
- /* Output code to construct and return the rtl for the instruction body. */
-
- if (XVECLEN (insn, 1) == 1)
-@@ -456,16 +472,12 @@
- operands = max_operand_vec (expand, 1);
-
- /* Output the function name and argument declarations. */
-- printf ("rtx\ngen_%s (", XSTR (expand, 0));
-+ printf ("rtx\ngen_%s ", XSTR (expand, 0));
- if (operands)
-- for (i = 0; i < operands; i++)
-- if (i)
-- printf (",\n\trtx operand%d", i);
-- else
-- printf ("rtx operand%d", i);
-+ printf("(rtx operand0 ATTRIBUTE_UNUSED, ...)\n");
- else
-- printf ("void");
-- printf (")\n");
-+ printf("(void)\n");
-+
- printf ("{\n");
-
- /* If we don't have any C code to write, only one insn is being written,
-@@ -475,6 +487,8 @@
- && operands > max_dup_opno
- && XVECLEN (expand, 1) == 1)
- {
-+ gen_vararg_prologue(operands);
-+
- printf (" return ");
- gen_exp (XVECEXP (expand, 1, 0), DEFINE_EXPAND, NULL);
- printf (";\n}\n\n");
-@@ -488,6 +502,7 @@
- for (; i <= max_scratch_opno; i++)
- printf (" rtx operand%d ATTRIBUTE_UNUSED;\n", i);
- printf (" rtx _val = 0;\n");
-+ gen_vararg_prologue(operands);
- printf (" start_sequence ();\n");
-
- /* The fourth operand of DEFINE_EXPAND is some code to be executed
-Index: gcc-4.2.3/gcc/genflags.c
-===================================================================
---- gcc-4.2.3.orig/gcc/genflags.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/genflags.c 2008-05-21 13:45:54.346288020 +0200
-@@ -127,7 +127,6 @@
- gen_proto (rtx insn)
- {
- int num = num_operands (insn);
-- int i;
- const char *name = XSTR (insn, 0);
- int truth = maybe_eval_c_test (XSTR (insn, 2));
-
-@@ -158,12 +157,7 @@
- if (num == 0)
- fputs ("void", stdout);
- else
-- {
-- for (i = 1; i < num; i++)
-- fputs ("rtx, ", stdout);
--
-- fputs ("rtx", stdout);
-- }
-+ fputs("rtx, ...", stdout);
-
- puts (");");
-
-@@ -173,12 +167,7 @@
- {
- printf ("static inline rtx\ngen_%s", name);
- if (num > 0)
-- {
-- putchar ('(');
-- for (i = 0; i < num-1; i++)
-- printf ("rtx ARG_UNUSED (%c), ", 'a' + i);
-- printf ("rtx ARG_UNUSED (%c))\n", 'a' + i);
-- }
-+ puts("(rtx ARG_UNUSED(a), ...)");
- else
- puts ("(void)");
- puts ("{\n return 0;\n}");
-Index: gcc-4.2.3/gcc/genoutput.c
-===================================================================
---- gcc-4.2.3.orig/gcc/genoutput.c 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/genoutput.c 2008-05-21 13:45:54.354290436 +0200
-@@ -386,7 +386,7 @@
- }
-
- if (d->name && d->name[0] != '*')
-- printf (" (insn_gen_fn) gen_%s,\n", d->name);
-+ printf (" gen_%s,\n", d->name);
- else
- printf (" 0,\n");
-
-Index: gcc-4.2.3/gcc/ifcvt.c
-===================================================================
---- gcc-4.2.3.orig/gcc/ifcvt.c 2007-10-30 05:32:06.000000000 +0100
-+++ gcc-4.2.3/gcc/ifcvt.c 2008-05-21 13:45:54.358287873 +0200
-@@ -1050,7 +1050,11 @@
- != UNKNOWN))
- {
- rtx cond = if_info->cond;
-- enum rtx_code code = reversed_comparison_code (cond, if_info->jump);
-+ /* This generates wrong code for AVR32. The cond code need not be reversed
-+ since the addmodecc patterns add if the condition is NOT met. */
-+ /* enum rtx_code code = reversed_comparison_code (cond, if_info->jump);*/
-+ enum rtx_code code = GET_CODE(cond);
-+
-
- /* First try to use addcc pattern. */
- if (general_operand (XEXP (cond, 0), VOIDmode)
-Index: gcc-4.2.3/gcc/longlong.h
-===================================================================
---- gcc-4.2.3.orig/gcc/longlong.h 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/longlong.h 2008-05-21 13:45:54.358287873 +0200
-@@ -226,6 +226,39 @@
- #define UDIV_TIME 100
- #endif /* __arm__ */
-
-+#if defined (__avr32__) && W_TYPE_SIZE == 32
-+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-+ __asm__ ("add\t%1, %4, %5\n\tadc\t%0, %2, %3" \
-+ : "=r" ((USItype) (sh)), \
-+ "=&r" ((USItype) (sl)) \
-+ : "r" ((USItype) (ah)), \
-+ "r" ((USItype) (bh)), \
-+ "r" ((USItype) (al)), \
-+ "r" ((USItype) (bl)) __CLOBBER_CC)
-+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-+ __asm__ ("sub\t%1, %4, %5\n\tsbc\t%0, %2, %3" \
-+ : "=r" ((USItype) (sh)), \
-+ "=&r" ((USItype) (sl)) \
-+ : "r" ((USItype) (ah)), \
-+ "r" ((USItype) (bh)), \
-+ "r" ((USItype) (al)), \
-+ "r" ((USItype) (bl)) __CLOBBER_CC)
-+
-+#define __umulsidi3(a,b) ((UDItype)(a) * (UDItype)(b))
-+
-+#define umul_ppmm(w1, w0, u, v) \
-+{ \
-+ DWunion __w; \
-+ __w.ll = __umulsidi3 (u, v); \
-+ w1 = __w.s.high; \
-+ w0 = __w.s.low; \
-+}
-+
-+#define count_leading_zeros(COUNT,X) ((COUNT) = __builtin_clz (X))
-+#define count_trailing_zeros(COUNT,X) ((COUNT) = __builtin_ctz (X))
-+#define COUNT_LEADING_ZEROS_0 32
-+#endif
-+
- #if defined (__hppa) && W_TYPE_SIZE == 32
- #define add_ssaaaa(sh, sl, ah, al, bh, bl) \
- __asm__ ("add %4,%5,%1\n\taddc %2,%3,%0" \
-Index: gcc-4.2.3/gcc/optabs.h
-===================================================================
---- gcc-4.2.3.orig/gcc/optabs.h 2007-09-01 17:28:30.000000000 +0200
-+++ gcc-4.2.3/gcc/optabs.h 2008-05-21 13:45:54.358287873 +0200
-@@ -431,7 +431,7 @@
- extern GTY(()) optab code_to_optab[NUM_RTX_CODE + 1];
-
- \f
--typedef rtx (*rtxfun) (rtx);
-+typedef rtx (*rtxfun) (rtx, ...);
-
- /* Indexed by the rtx-code for a conditional (e.g. EQ, LT,...)
- gives the gen_function to make a branch to test that condition. */
-Index: gcc-4.2.3/gcc/testsuite/gcc.dg/cpp/mac-eol-at-eof.c
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/gcc.dg/cpp/mac-eol-at-eof.c 2005-02-19 20:48:02.000000000 +0100
-+++ gcc-4.2.3/gcc/testsuite/gcc.dg/cpp/mac-eol-at-eof.c 2008-05-21 13:45:54.358287873 +0200
-@@ -1 +1,3 @@
--/* Test no newline at eof warning when Mac line ending is used*/\r/* { dg-do compile } */\rint main() { return 0; }
-\ No newline at end of file
-+/* Test no newline at eof warning when Mac line ending is used*/
-+/* { dg-do compile } */
-+int main() { return 0; }
-Index: gcc-4.2.3/gcc/testsuite/gcc.dg/sibcall-3.c
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/gcc.dg/sibcall-3.c 2005-07-20 08:39:38.000000000 +0200
-+++ gcc-4.2.3/gcc/testsuite/gcc.dg/sibcall-3.c 2008-05-21 13:45:54.358287873 +0200
-@@ -5,7 +5,7 @@
- Copyright (C) 2002 Free Software Foundation Inc.
- Contributed by Hans-Peter Nilsson <hp@bitrange.com> */
-
--/* { dg-do run { xfail arc-*-* avr-*-* c4x-*-* cris-*-* h8300-*-* hppa*64*-*-* m32r-*-* m68hc1?-*-* m681?-*-* m680*-*-* m68k-*-* mcore-*-* mn10300-*-* xstormy16-*-* v850*-*-* vax-*-* xtensa-*-* } } */
-+/* { dg-do run { xfail arc-*-* avr-*-* avr32-*-* c4x-*-* cris-*-* h8300-*-* hppa*64*-*-* m32r-*-* m68hc1?-*-* m681?-*-* m680*-*-* m68k-*-* mcore-*-* mn10300-*-* xstormy16-*-* v850*-*-* vax-*-* xtensa-*-* } } */
- /* { dg-options "-O2 -foptimize-sibling-calls" } */
-
- /* The option -foptimize-sibling-calls is the default, but serves as
-Index: gcc-4.2.3/gcc/testsuite/gcc.dg/sibcall-4.c
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/gcc.dg/sibcall-4.c 2005-07-20 08:39:38.000000000 +0200
-+++ gcc-4.2.3/gcc/testsuite/gcc.dg/sibcall-4.c 2008-05-21 13:45:54.362288662 +0200
-@@ -5,7 +5,7 @@
- Copyright (C) 2002 Free Software Foundation Inc.
- Contributed by Hans-Peter Nilsson <hp@bitrange.com> */
-
--/* { dg-do run { xfail arc-*-* avr-*-* c4x-*-* cris-*-* h8300-*-* hppa*64*-*-* m32r-*-* m68hc1?-*-* m681?-*-* m680*-*-* m68k-*-* mcore-*-* mn10300-*-* xstormy16-*-* v850*-*-* vax-*-* xtensa-*-* } } */
-+/* { dg-do run { xfail arc-*-* avr-*-* avr32-*-* c4x-*-* cris-*-* h8300-*-* hppa*64*-*-* m32r-*-* m68hc1?-*-* m681?-*-* m680*-*-* m68k-*-* mcore-*-* mn10300-*-* xstormy16-*-* v850*-*-* vax-*-* xtensa-*-* } } */
- /* { dg-options "-O2 -foptimize-sibling-calls" } */
-
- /* The option -foptimize-sibling-calls is the default, but serves as
-Index: gcc-4.2.3/gcc/testsuite/gcc.dg/trampoline-1.c
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/gcc.dg/trampoline-1.c 2004-08-03 10:22:26.000000000 +0200
-+++ gcc-4.2.3/gcc/testsuite/gcc.dg/trampoline-1.c 2008-05-21 13:45:54.362288662 +0200
-@@ -46,6 +46,8 @@
-
- int main (void)
- {
-+#ifndef NO_TRAMPOLINES
- foo ();
-+#endif
- return 0;
- }
-Index: gcc-4.2.3/gcc/testsuite/gfortran.dg/char_pointer_assign.f90
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/gfortran.dg/char_pointer_assign.f90 2005-05-29 18:03:43.000000000 +0200
-+++ gcc-4.2.3/gcc/testsuite/gfortran.dg/char_pointer_assign.f90 2008-05-21 13:45:54.362288662 +0200
-@@ -1,4 +1,4 @@
--! { dg-do run }
-+! { dg-do run }
- program char_pointer_assign
- ! Test character pointer assignments, required
- ! to fix PR18890 and PR21297
-@@ -8,7 +8,7 @@
- character*4, target :: t2(4) =(/"lmno","lmno","lmno","lmno"/)
- character*4 :: const
- character*4, pointer :: c1, c3
-- character*4, pointer :: c2(:), c4(:)
-+ character*4, pointer :: c2(:), c4(:)
- allocate (c3, c4(4))
- ! Scalars first.
- c3 = "lmno" ! pointer = constant
-@@ -24,13 +24,13 @@
-
- ! Now arrays.
- c4 = "lmno" ! pointer = constant
-- t2 = c4 ! target = pointer
-- c2 => t2 ! pointer =>target
-- const = c2(1)
-+ t2 = c4 ! target = pointer
-+ c2 => t2 ! pointer =>target
-+ const = c2(1)
- const(2:3) ="nm" ! c2(:)(2:3) = "nm" is still broken
- c2 = const
- c4 = c2 ! pointer = pointer
-- const = c4(1)
-+ const = c4(1)
- const(1:1) ="o" ! c4(:)(1:1) = "o" is still broken
- const(4:4) ="l" ! c4(:)(4:4) = "l" is still broken
- c4 = const
-Index: gcc-4.2.3/gcc/testsuite/g++.old-deja/g++.pt/static11.C
-===================================================================
---- gcc-4.2.3.orig/gcc/testsuite/g++.old-deja/g++.pt/static11.C 2006-02-22 10:05:07.000000000 +0100
-+++ gcc-4.2.3/gcc/testsuite/g++.old-deja/g++.pt/static11.C 2008-05-21 13:45:54.362288662 +0200
-@@ -2,7 +2,7 @@
- // in their dejagnu baseboard description) require that the status is
- // final when exit is entered (or main returns), and not "overruled" by a
- // destructor calling _exit. It's not really worth it to handle that.
--// { dg-do run { xfail mmix-knuth-mmixware xtensa-*-elf* arm*-*-elf arm*-*-eabi m68k-*-elf } }
-+// { dg-do run { xfail mmix-knuth-mmixware xtensa-*-elf* avr32-*-elf arm*-*-elf arm*-*-eabi m68k-*-elf } }
-
- // Bug: g++ was failing to destroy C<int>::a because it was using two
- // different sentry variables for construction and destruction.
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/copying.txt
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/copying.txt 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/copying.txt 2008-05-21 13:45:54.362288662 +0200
-@@ -1,30 +1,30 @@
--Copyright (c) 2001, Thai Open Source Software Center Ltd, Sun Microsystems.
--All rights reserved.
--
--Redistribution and use in source and binary forms, with or without
--modification, are permitted provided that the following conditions are
--met:
--
-- Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
--
-- Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in
-- the documentation and/or other materials provided with the
-- distribution.
--
-- Neither the names of the copyright holders nor the names of its
-- contributors may be used to endorse or promote products derived
-- from this software without specific prior written permission.
--
--THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
--"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
--LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
--A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
--CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
--EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
--PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
--PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
--LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
--NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
--SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+Copyright (c) 2001, Thai Open Source Software Center Ltd, Sun Microsystems.
-+All rights reserved.
-+
-+Redistribution and use in source and binary forms, with or without
-+modification, are permitted provided that the following conditions are
-+met:
-+
-+ Redistributions of source code must retain the above copyright
-+ notice, this list of conditions and the following disclaimer.
-+
-+ Redistributions in binary form must reproduce the above copyright
-+ notice, this list of conditions and the following disclaimer in
-+ the documentation and/or other materials provided with the
-+ distribution.
-+
-+ Neither the names of the copyright holders nor the names of its
-+ contributors may be used to endorse or promote products derived
-+ from this software without specific prior written permission.
-+
-+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
-+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeBuilder.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeBuilder.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeBuilder.java 2008-05-21 13:45:54.362288662 +0200
-@@ -1,45 +1,45 @@
--package org.relaxng.datatype;
--
--/**
-- * Creates a user-defined type by adding parameters to
-- * the pre-defined type.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface DatatypeBuilder {
--
-- /**
-- * Adds a new parameter.
-- *
-- * @param name
-- * The name of the parameter to be added.
-- * @param strValue
-- * The raw value of the parameter. Caller may not normalize
-- * this value because any white space is potentially significant.
-- * @param context
-- * The context information which can be used by the callee to
-- * acquire additional information. This context object is
-- * valid only during this method call. The callee may not
-- * keep a reference to this object.
-- * @exception DatatypeException
-- * When the given parameter is inappropriate for some reason.
-- * The callee is responsible to recover from this error.
-- * That is, the object should behave as if no such error
-- * was occured.
-- */
-- void addParameter( String name, String strValue, ValidationContext context )
-- throws DatatypeException;
--
-- /**
-- * Derives a new Datatype from a Datatype by parameters that
-- * were already set through the addParameter method.
-- *
-- * @exception DatatypeException
-- * DatatypeException must be thrown if the derivation is
-- * somehow invalid. For example, a required parameter is missing,
-- * etc. The exception should contain a diagnosis message
-- * if possible.
-- */
-- Datatype createDatatype() throws DatatypeException;
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * Creates a user-defined type by adding parameters to
-+ * the pre-defined type.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface DatatypeBuilder {
-+
-+ /**
-+ * Adds a new parameter.
-+ *
-+ * @param name
-+ * The name of the parameter to be added.
-+ * @param strValue
-+ * The raw value of the parameter. Caller may not normalize
-+ * this value because any white space is potentially significant.
-+ * @param context
-+ * The context information which can be used by the callee to
-+ * acquire additional information. This context object is
-+ * valid only during this method call. The callee may not
-+ * keep a reference to this object.
-+ * @exception DatatypeException
-+ * When the given parameter is inappropriate for some reason.
-+ * The callee is responsible to recover from this error.
-+ * That is, the object should behave as if no such error
-+ * was occured.
-+ */
-+ void addParameter( String name, String strValue, ValidationContext context )
-+ throws DatatypeException;
-+
-+ /**
-+ * Derives a new Datatype from a Datatype by parameters that
-+ * were already set through the addParameter method.
-+ *
-+ * @exception DatatypeException
-+ * DatatypeException must be thrown if the derivation is
-+ * somehow invalid. For example, a required parameter is missing,
-+ * etc. The exception should contain a diagnosis message
-+ * if possible.
-+ */
-+ Datatype createDatatype() throws DatatypeException;
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeException.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeException.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeException.java 2008-05-21 13:45:54.366287774 +0200
-@@ -1,39 +1,39 @@
--package org.relaxng.datatype;
--
--/**
-- * Signals Datatype related exceptions.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public class DatatypeException extends Exception {
--
-- public DatatypeException( int index, String msg ) {
-- super(msg);
-- this.index = index;
-- }
-- public DatatypeException( String msg ) {
-- this(UNKNOWN,msg);
-- }
-- /**
-- * A constructor for those datatype libraries which don't support any
-- * diagnostic information at all.
-- */
-- public DatatypeException() {
-- this(UNKNOWN,null);
-- }
--
--
-- private final int index;
--
-- public static final int UNKNOWN = -1;
--
-- /**
-- * Gets the index of the content where the error occured.
-- * UNKNOWN can be returned to indicate that no index information
-- * is available.
-- */
-- public int getIndex() {
-- return index;
-- }
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * Signals Datatype related exceptions.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public class DatatypeException extends Exception {
-+
-+ public DatatypeException( int index, String msg ) {
-+ super(msg);
-+ this.index = index;
-+ }
-+ public DatatypeException( String msg ) {
-+ this(UNKNOWN,msg);
-+ }
-+ /**
-+ * A constructor for those datatype libraries which don't support any
-+ * diagnostic information at all.
-+ */
-+ public DatatypeException() {
-+ this(UNKNOWN,null);
-+ }
-+
-+
-+ private final int index;
-+
-+ public static final int UNKNOWN = -1;
-+
-+ /**
-+ * Gets the index of the content where the error occured.
-+ * UNKNOWN can be returned to indicate that no index information
-+ * is available.
-+ */
-+ public int getIndex() {
-+ return index;
-+ }
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/Datatype.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/Datatype.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/Datatype.java 2008-05-21 13:45:54.366287774 +0200
-@@ -1,237 +1,237 @@
--package org.relaxng.datatype;
--
--/**
-- * Datatype object.
-- *
-- * This object has the following functionality:
-- *
-- * <ol>
-- * <li> functionality to identify a class of character sequences. This is
-- * done through the isValid method.
-- *
-- * <li> functionality to produce a "value object" from a character sequence and
-- * context information.
-- *
-- * <li> functionality to test the equality of two value objects.
-- * </ol>
-- *
-- * This interface also defines the createStreamingValidator method,
-- * which is intended to efficiently support the validation of
-- * large character sequences.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface Datatype {
--
-- /**
-- * Checks if the specified 'literal' matches this Datatype
-- * with respect to the current context.
-- *
-- * @param literal
-- * the lexical representation to be checked.
-- * @param context
-- * If this datatype is context-dependent
-- * (i.e. the {@link #isContextDependent} method returns true),
-- * then the caller must provide a non-null valid context object.
-- * Otherwise, the caller can pass null.
-- *
-- * @return
-- * true if the 'literal' is a member of this Datatype;
-- * false if it's not a member of this Datatype.
-- */
-- boolean isValid( String literal, ValidationContext context );
--
-- /**
-- * Similar to the isValid method but throws an exception with diagnosis
-- * in case of errors.
-- *
-- * <p>
-- * If the specified 'literal' is a valid lexical representation for this
-- * datatype, then this method must return without throwing any exception.
-- * If not, the callee must throw an exception (with diagnosis message,
-- * if possible.)
-- *
-- * <p>
-- * The application can use this method to provide detailed error message
-- * to users. This method is kept separate from the isValid method to
-- * achieve higher performance during normal validation.
-- *
-- * @exception DatatypeException
-- * If the given literal is invalid, then this exception is thrown.
-- * If the callee supports error diagnosis, then the exception should
-- * contain a diagnosis message.
-- */
-- void checkValid( String literal, ValidationContext context )
-- throws DatatypeException;
--
-- /**
-- * Creates an instance of a streaming validator for this type.
-- *
-- * <p>
-- * By using streaming validators instead of the isValid method,
-- * the caller can avoid keeping the entire string, which is
-- * sometimes quite big, in memory.
-- *
-- * @param context
-- * If this datatype is context-dependent
-- * (i.e. the {@link #isContextDependent} method returns true),
-- * then the caller must provide a non-null valid context object.
-- * Otherwise, the caller can pass null.
-- * The callee may keep a reference to this context object
-- * only while the returned streaming validator is being used.
-- */
-- DatatypeStreamingValidator createStreamingValidator( ValidationContext context );
--
-- /**
-- * Converts lexcial value and the current context to the corresponding
-- * value object.
-- *
-- * <p>
-- * The caller cannot generally assume that the value object is
-- * a meaningful Java object. For example, the caller cannot expect
-- * this method to return <code>java.lang.Number</code> type for
-- * the "integer" type of XML Schema Part 2.
-- *
-- * <p>
-- * Also, the caller cannot assume that the equals method and
-- * the hashCode method of the value object are consistent with
-- * the semantics of the datatype. For that purpose, the sameValue
-- * method and the valueHashCode method have to be used. Note that
-- * this means you cannot use classes like
-- * <code>java.util.Hashtable</code> to store the value objects.
-- *
-- * <p>
-- * The returned value object should be used solely for the sameValue
-- * and valueHashCode methods.
-- *
-- * @param context
-- * If this datatype is context-dependent
-- * (when the {@link #isContextDependent} method returns true),
-- * then the caller must provide a non-null valid context object.
-- * Otherwise, the caller can pass null.
-- *
-- * @return null
-- * when the given lexical value is not a valid lexical
-- * value for this type.
-- */
-- Object createValue( String literal, ValidationContext context );
--
-- /**
-- * Tests the equality of two value objects which were originally
-- * created by the createValue method of this object.
-- *
-- * The behavior is undefined if objects not created by this type
-- * are passed. It is the caller's responsibility to ensure that
-- * value objects belong to this type.
-- *
-- * @return
-- * true if two value objects are considered equal according to
-- * the definition of this datatype; false if otherwise.
-- */
-- boolean sameValue( Object value1, Object value2 );
--
--
-- /**
-- * Computes the hash code for a value object,
-- * which is consistent with the sameValue method.
-- *
-- * @return
-- * hash code for the specified value object.
-- */
-- int valueHashCode( Object value );
--
--
--
--
-- /**
-- * Indicates that the datatype doesn't have ID/IDREF semantics.
-- *
-- * This value is one of the possible return values of the
-- * {@link #getIdType} method.
-- */
-- public static final int ID_TYPE_NULL = 0;
--
-- /**
-- * Indicates that RELAX NG compatibility processors should
-- * treat this datatype as having ID semantics.
-- *
-- * This value is one of the possible return values of the
-- * {@link #getIdType} method.
-- */
-- public static final int ID_TYPE_ID = 1;
--
-- /**
-- * Indicates that RELAX NG compatibility processors should
-- * treat this datatype as having IDREF semantics.
-- *
-- * This value is one of the possible return values of the
-- * {@link #getIdType} method.
-- */
-- public static final int ID_TYPE_IDREF = 2;
--
-- /**
-- * Indicates that RELAX NG compatibility processors should
-- * treat this datatype as having IDREFS semantics.
-- *
-- * This value is one of the possible return values of the
-- * {@link #getIdType} method.
-- */
-- public static final int ID_TYPE_IDREFS = 3;
--
-- /**
-- * Checks if the ID/IDREF semantics is associated with this
-- * datatype.
-- *
-- * <p>
-- * This method is introduced to support the RELAX NG DTD
-- * compatibility spec. (Of course it's always free to use
-- * this method for other purposes.)
-- *
-- * <p>
-- * If you are implementing a datatype library and have no idea about
-- * the "RELAX NG DTD compatibility" thing, just return
-- * <code>ID_TYPE_NULL</code> is fine.
-- *
-- * @return
-- * If this datatype doesn't have any ID/IDREF semantics,
-- * it returns {@link #ID_TYPE_NULL}. If it has such a semantics
-- * (for example, XSD:ID, XSD:IDREF and comp:ID type), then
-- * it returns {@link #ID_TYPE_ID}, {@link #ID_TYPE_IDREF} or
-- * {@link #ID_TYPE_IDREFS}.
-- */
-- public int getIdType();
--
--
-- /**
-- * Checks if this datatype may need a context object for
-- * the validation.
-- *
-- * <p>
-- * The callee must return true even when the context
-- * is not always necessary. (For example, the "QName" type
-- * doesn't need a context object when validating unprefixed
-- * string. But nonetheless QName must return true.)
-- *
-- * <p>
-- * XSD's <code>string</code> and <code>short</code> types
-- * are examples of context-independent datatypes.
-- * Its <code>QName</code> and <code>ENTITY</code> types
-- * are examples of context-dependent datatypes.
-- *
-- * <p>
-- * When a datatype is context-independent, then
-- * the {@link #isValid} method, the {@link #checkValid} method,
-- * the {@link #createStreamingValidator} method and
-- * the {@link #createValue} method can be called without
-- * providing a context object.
-- *
-- * @return
-- * <b>true</b> if this datatype is context-dependent
-- * (it needs a context object sometimes);
-- *
-- * <b>false</b> if this datatype is context-<b>in</b>dependent
-- * (it never needs a context object).
-- */
-- public boolean isContextDependent();
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * Datatype object.
-+ *
-+ * This object has the following functionality:
-+ *
-+ * <ol>
-+ * <li> functionality to identify a class of character sequences. This is
-+ * done through the isValid method.
-+ *
-+ * <li> functionality to produce a "value object" from a character sequence and
-+ * context information.
-+ *
-+ * <li> functionality to test the equality of two value objects.
-+ * </ol>
-+ *
-+ * This interface also defines the createStreamingValidator method,
-+ * which is intended to efficiently support the validation of
-+ * large character sequences.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface Datatype {
-+
-+ /**
-+ * Checks if the specified 'literal' matches this Datatype
-+ * with respect to the current context.
-+ *
-+ * @param literal
-+ * the lexical representation to be checked.
-+ * @param context
-+ * If this datatype is context-dependent
-+ * (i.e. the {@link #isContextDependent} method returns true),
-+ * then the caller must provide a non-null valid context object.
-+ * Otherwise, the caller can pass null.
-+ *
-+ * @return
-+ * true if the 'literal' is a member of this Datatype;
-+ * false if it's not a member of this Datatype.
-+ */
-+ boolean isValid( String literal, ValidationContext context );
-+
-+ /**
-+ * Similar to the isValid method but throws an exception with diagnosis
-+ * in case of errors.
-+ *
-+ * <p>
-+ * If the specified 'literal' is a valid lexical representation for this
-+ * datatype, then this method must return without throwing any exception.
-+ * If not, the callee must throw an exception (with diagnosis message,
-+ * if possible.)
-+ *
-+ * <p>
-+ * The application can use this method to provide detailed error message
-+ * to users. This method is kept separate from the isValid method to
-+ * achieve higher performance during normal validation.
-+ *
-+ * @exception DatatypeException
-+ * If the given literal is invalid, then this exception is thrown.
-+ * If the callee supports error diagnosis, then the exception should
-+ * contain a diagnosis message.
-+ */
-+ void checkValid( String literal, ValidationContext context )
-+ throws DatatypeException;
-+
-+ /**
-+ * Creates an instance of a streaming validator for this type.
-+ *
-+ * <p>
-+ * By using streaming validators instead of the isValid method,
-+ * the caller can avoid keeping the entire string, which is
-+ * sometimes quite big, in memory.
-+ *
-+ * @param context
-+ * If this datatype is context-dependent
-+ * (i.e. the {@link #isContextDependent} method returns true),
-+ * then the caller must provide a non-null valid context object.
-+ * Otherwise, the caller can pass null.
-+ * The callee may keep a reference to this context object
-+ * only while the returned streaming validator is being used.
-+ */
-+ DatatypeStreamingValidator createStreamingValidator( ValidationContext context );
-+
-+ /**
-+ * Converts lexcial value and the current context to the corresponding
-+ * value object.
-+ *
-+ * <p>
-+ * The caller cannot generally assume that the value object is
-+ * a meaningful Java object. For example, the caller cannot expect
-+ * this method to return <code>java.lang.Number</code> type for
-+ * the "integer" type of XML Schema Part 2.
-+ *
-+ * <p>
-+ * Also, the caller cannot assume that the equals method and
-+ * the hashCode method of the value object are consistent with
-+ * the semantics of the datatype. For that purpose, the sameValue
-+ * method and the valueHashCode method have to be used. Note that
-+ * this means you cannot use classes like
-+ * <code>java.util.Hashtable</code> to store the value objects.
-+ *
-+ * <p>
-+ * The returned value object should be used solely for the sameValue
-+ * and valueHashCode methods.
-+ *
-+ * @param context
-+ * If this datatype is context-dependent
-+ * (when the {@link #isContextDependent} method returns true),
-+ * then the caller must provide a non-null valid context object.
-+ * Otherwise, the caller can pass null.
-+ *
-+ * @return null
-+ * when the given lexical value is not a valid lexical
-+ * value for this type.
-+ */
-+ Object createValue( String literal, ValidationContext context );
-+
-+ /**
-+ * Tests the equality of two value objects which were originally
-+ * created by the createValue method of this object.
-+ *
-+ * The behavior is undefined if objects not created by this type
-+ * are passed. It is the caller's responsibility to ensure that
-+ * value objects belong to this type.
-+ *
-+ * @return
-+ * true if two value objects are considered equal according to
-+ * the definition of this datatype; false if otherwise.
-+ */
-+ boolean sameValue( Object value1, Object value2 );
-+
-+
-+ /**
-+ * Computes the hash code for a value object,
-+ * which is consistent with the sameValue method.
-+ *
-+ * @return
-+ * hash code for the specified value object.
-+ */
-+ int valueHashCode( Object value );
-+
-+
-+
-+
-+ /**
-+ * Indicates that the datatype doesn't have ID/IDREF semantics.
-+ *
-+ * This value is one of the possible return values of the
-+ * {@link #getIdType} method.
-+ */
-+ public static final int ID_TYPE_NULL = 0;
-+
-+ /**
-+ * Indicates that RELAX NG compatibility processors should
-+ * treat this datatype as having ID semantics.
-+ *
-+ * This value is one of the possible return values of the
-+ * {@link #getIdType} method.
-+ */
-+ public static final int ID_TYPE_ID = 1;
-+
-+ /**
-+ * Indicates that RELAX NG compatibility processors should
-+ * treat this datatype as having IDREF semantics.
-+ *
-+ * This value is one of the possible return values of the
-+ * {@link #getIdType} method.
-+ */
-+ public static final int ID_TYPE_IDREF = 2;
-+
-+ /**
-+ * Indicates that RELAX NG compatibility processors should
-+ * treat this datatype as having IDREFS semantics.
-+ *
-+ * This value is one of the possible return values of the
-+ * {@link #getIdType} method.
-+ */
-+ public static final int ID_TYPE_IDREFS = 3;
-+
-+ /**
-+ * Checks if the ID/IDREF semantics is associated with this
-+ * datatype.
-+ *
-+ * <p>
-+ * This method is introduced to support the RELAX NG DTD
-+ * compatibility spec. (Of course it's always free to use
-+ * this method for other purposes.)
-+ *
-+ * <p>
-+ * If you are implementing a datatype library and have no idea about
-+ * the "RELAX NG DTD compatibility" thing, just return
-+ * <code>ID_TYPE_NULL</code> is fine.
-+ *
-+ * @return
-+ * If this datatype doesn't have any ID/IDREF semantics,
-+ * it returns {@link #ID_TYPE_NULL}. If it has such a semantics
-+ * (for example, XSD:ID, XSD:IDREF and comp:ID type), then
-+ * it returns {@link #ID_TYPE_ID}, {@link #ID_TYPE_IDREF} or
-+ * {@link #ID_TYPE_IDREFS}.
-+ */
-+ public int getIdType();
-+
-+
-+ /**
-+ * Checks if this datatype may need a context object for
-+ * the validation.
-+ *
-+ * <p>
-+ * The callee must return true even when the context
-+ * is not always necessary. (For example, the "QName" type
-+ * doesn't need a context object when validating unprefixed
-+ * string. But nonetheless QName must return true.)
-+ *
-+ * <p>
-+ * XSD's <code>string</code> and <code>short</code> types
-+ * are examples of context-independent datatypes.
-+ * Its <code>QName</code> and <code>ENTITY</code> types
-+ * are examples of context-dependent datatypes.
-+ *
-+ * <p>
-+ * When a datatype is context-independent, then
-+ * the {@link #isValid} method, the {@link #checkValid} method,
-+ * the {@link #createStreamingValidator} method and
-+ * the {@link #createValue} method can be called without
-+ * providing a context object.
-+ *
-+ * @return
-+ * <b>true</b> if this datatype is context-dependent
-+ * (it needs a context object sometimes);
-+ *
-+ * <b>false</b> if this datatype is context-<b>in</b>dependent
-+ * (it never needs a context object).
-+ */
-+ public boolean isContextDependent();
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibraryFactory.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibraryFactory.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibraryFactory.java 2008-05-21 13:45:54.366287774 +0200
-@@ -1,26 +1,26 @@
--package org.relaxng.datatype;
--
--/**
-- * Factory class for the DatatypeLibrary class.
-- *
-- * <p>
-- * The datatype library should provide the implementation of
-- * this interface if it wants to be found by the schema processors.
-- * The implementor also have to place a file in your jar file.
-- * See the reference datatype library implementation for detail.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface DatatypeLibraryFactory
--{
-- /**
-- * Creates a new instance of a DatatypeLibrary that supports
-- * the specified namespace URI.
-- *
-- * @return
-- * <code>null</code> if the specified namespace URI is not
-- * supported.
-- */
-- DatatypeLibrary createDatatypeLibrary( String namespaceURI );
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * Factory class for the DatatypeLibrary class.
-+ *
-+ * <p>
-+ * The datatype library should provide the implementation of
-+ * this interface if it wants to be found by the schema processors.
-+ * The implementor also have to place a file in your jar file.
-+ * See the reference datatype library implementation for detail.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface DatatypeLibraryFactory
-+{
-+ /**
-+ * Creates a new instance of a DatatypeLibrary that supports
-+ * the specified namespace URI.
-+ *
-+ * @return
-+ * <code>null</code> if the specified namespace URI is not
-+ * supported.
-+ */
-+ DatatypeLibrary createDatatypeLibrary( String namespaceURI );
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibrary.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibrary.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeLibrary.java 2008-05-21 13:45:54.366287774 +0200
-@@ -1,37 +1,37 @@
--package org.relaxng.datatype;
--
--/**
-- * A Datatype library
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface DatatypeLibrary {
--
-- /**
-- * Creates a new instance of DatatypeBuilder.
-- *
-- * The callee should throw a DatatypeException in case of an error.
-- *
-- * @param baseTypeLocalName
-- * The local name of the base type.
-- *
-- * @return
-- * A non-null valid datatype object.
-- */
-- DatatypeBuilder createDatatypeBuilder( String baseTypeLocalName )
-- throws DatatypeException;
--
-- /**
-- * Gets or creates a pre-defined type.
-- *
-- * This is just a short-cut of
-- * <code>createDatatypeBuilder(typeLocalName).createDatatype();</code>
-- *
-- * The callee should throw a DatatypeException in case of an error.
-- *
-- * @return
-- * A non-null valid datatype object.
-- */
-- Datatype createDatatype( String typeLocalName ) throws DatatypeException;
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * A Datatype library
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface DatatypeLibrary {
-+
-+ /**
-+ * Creates a new instance of DatatypeBuilder.
-+ *
-+ * The callee should throw a DatatypeException in case of an error.
-+ *
-+ * @param baseTypeLocalName
-+ * The local name of the base type.
-+ *
-+ * @return
-+ * A non-null valid datatype object.
-+ */
-+ DatatypeBuilder createDatatypeBuilder( String baseTypeLocalName )
-+ throws DatatypeException;
-+
-+ /**
-+ * Gets or creates a pre-defined type.
-+ *
-+ * This is just a short-cut of
-+ * <code>createDatatypeBuilder(typeLocalName).createDatatype();</code>
-+ *
-+ * The callee should throw a DatatypeException in case of an error.
-+ *
-+ * @return
-+ * A non-null valid datatype object.
-+ */
-+ Datatype createDatatype( String typeLocalName ) throws DatatypeException;
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeStreamingValidator.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeStreamingValidator.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/DatatypeStreamingValidator.java 2008-05-21 13:45:54.366287774 +0200
-@@ -1,46 +1,46 @@
--package org.relaxng.datatype;
--
--/**
-- * Datatype streaming validator.
-- *
-- * <p>
-- * The streaming validator is an optional feature that is useful for
-- * certain Datatypes. It allows the caller to incrementally provide
-- * the literal.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface DatatypeStreamingValidator {
--
-- /**
-- * Passes an additional fragment of the literal.
-- *
-- * <p>
-- * The application can call this method several times, then call
-- * the isValid method (or the checkValid method) to check the validity
-- * of the accumulated characters.
-- */
-- void addCharacters( char[] buf, int start, int len );
--
-- /**
-- * Tells if the accumulated literal is valid with respect to
-- * the underlying Datatype.
-- *
-- * @return
-- * True if it is valid. False if otherwise.
-- */
-- boolean isValid();
--
-- /**
-- * Similar to the isValid method, but this method throws
-- * Exception (with possibly diagnostic information), instead of
-- * returning false.
-- *
-- * @exception DatatypeException
-- * If the callee supports the diagnosis and the accumulated
-- * literal is invalid, then this exception that possibly
-- * contains diagnosis information is thrown.
-- */
-- void checkValid() throws DatatypeException;
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * Datatype streaming validator.
-+ *
-+ * <p>
-+ * The streaming validator is an optional feature that is useful for
-+ * certain Datatypes. It allows the caller to incrementally provide
-+ * the literal.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface DatatypeStreamingValidator {
-+
-+ /**
-+ * Passes an additional fragment of the literal.
-+ *
-+ * <p>
-+ * The application can call this method several times, then call
-+ * the isValid method (or the checkValid method) to check the validity
-+ * of the accumulated characters.
-+ */
-+ void addCharacters( char[] buf, int start, int len );
-+
-+ /**
-+ * Tells if the accumulated literal is valid with respect to
-+ * the underlying Datatype.
-+ *
-+ * @return
-+ * True if it is valid. False if otherwise.
-+ */
-+ boolean isValid();
-+
-+ /**
-+ * Similar to the isValid method, but this method throws
-+ * Exception (with possibly diagnostic information), instead of
-+ * returning false.
-+ *
-+ * @exception DatatypeException
-+ * If the callee supports the diagnosis and the accumulated
-+ * literal is invalid, then this exception that possibly
-+ * contains diagnosis information is thrown.
-+ */
-+ void checkValid() throws DatatypeException;
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/DatatypeLibraryLoader.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/DatatypeLibraryLoader.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/DatatypeLibraryLoader.java 2008-05-21 13:45:54.370287167 +0200
-@@ -1,262 +1,262 @@
--/**
-- * Copyright (c) 2001, Thai Open Source Software Center Ltd
-- * All rights reserved.
-- *
-- * Redistribution and use in source and binary forms, with or without
-- * modification, are permitted provided that the following conditions are
-- * met:
-- *
-- * Redistributions of source code must retain the above copyright
-- * notice, this list of conditions and the following disclaimer.
-- *
-- * Redistributions in binary form must reproduce the above copyright
-- * notice, this list of conditions and the following disclaimer in
-- * the documentation and/or other materials provided with the
-- * distribution.
-- *
-- * Neither the name of the Thai Open Source Software Center Ltd nor
-- * the names of its contributors may be used to endorse or promote
-- * products derived from this software without specific prior written
-- * permission.
-- *
-- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
-- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- */
--package org.relaxng.datatype.helpers;
--
--import org.relaxng.datatype.DatatypeLibraryFactory;
--import org.relaxng.datatype.DatatypeLibrary;
--import java.util.Enumeration;
--import java.util.NoSuchElementException;
--import java.util.Vector;
--import java.io.Reader;
--import java.io.InputStream;
--import java.io.InputStreamReader;
--import java.io.BufferedReader;
--import java.io.IOException;
--import java.io.UnsupportedEncodingException;
--import java.net.URL;
--
--/**
-- * Discovers the datatype library implementation from the classpath.
-- *
-- * <p>
-- * The call of the createDatatypeLibrary method finds an implementation
-- * from a given datatype library URI at run-time.
-- */
--public class DatatypeLibraryLoader implements DatatypeLibraryFactory {
-- private final Service service = new Service(DatatypeLibraryFactory.class);
--
-- public DatatypeLibrary createDatatypeLibrary(String uri) {
-- for (Enumeration e = service.getProviders();
-- e.hasMoreElements();) {
-- DatatypeLibraryFactory factory
-- = (DatatypeLibraryFactory)e.nextElement();
-- DatatypeLibrary library = factory.createDatatypeLibrary(uri);
-- if (library != null)
-- return library;
-- }
-- return null;
-- }
--
-- private static class Service {
-- private final Class serviceClass;
-- private final Enumeration configFiles;
-- private Enumeration classNames = null;
-- private final Vector providers = new Vector();
-- private Loader loader;
--
-- private class ProviderEnumeration implements Enumeration {
-- private int nextIndex = 0;
--
-- public boolean hasMoreElements() {
-- return nextIndex < providers.size() || moreProviders();
-- }
--
-- public Object nextElement() {
-- try {
-- return providers.elementAt(nextIndex++);
-- }
-- catch (ArrayIndexOutOfBoundsException e) {
-- throw new NoSuchElementException();
-- }
-- }
-- }
--
-- private static class Singleton implements Enumeration {
-- private Object obj;
-- private Singleton(Object obj) {
-- this.obj = obj;
-- }
--
-- public boolean hasMoreElements() {
-- return obj != null;
-- }
--
-- public Object nextElement() {
-- if (obj == null)
-- throw new NoSuchElementException();
-- Object tem = obj;
-- obj = null;
-- return tem;
-- }
-- }
--
-- // JDK 1.1
-- private static class Loader {
-- Enumeration getResources(String resName) {
-- ClassLoader cl = Loader.class.getClassLoader();
-- URL url;
-- if (cl == null)
-- url = ClassLoader.getSystemResource(resName);
-- else
-- url = cl.getResource(resName);
-- return new Singleton(url);
-- }
--
-- Class loadClass(String name) throws ClassNotFoundException {
-- return Class.forName(name);
-- }
-- }
--
-- // JDK 1.2+
-- private static class Loader2 extends Loader {
-- private ClassLoader cl;
--
-- Loader2() {
-- cl = Loader2.class.getClassLoader();
-- // If the thread context class loader has the class loader
-- // of this class as an ancestor, use the thread context class
-- // loader. Otherwise, the thread context class loader
-- // probably hasn't been set up properly, so don't use it.
-- ClassLoader clt = Thread.currentThread().getContextClassLoader();
-- for (ClassLoader tem = clt; tem != null; tem = tem.getParent())
-- if (tem == cl) {
-- cl = clt;
-- break;
-- }
-- }
--
-- Enumeration getResources(String resName) {
-- try {
-- return cl.getResources(resName);
-- }
-- catch (IOException e) {
-- return new Singleton(null);
-- }
-- }
--
-- Class loadClass(String name) throws ClassNotFoundException {
-- return Class.forName(name, true, cl);
-- }
-- }
--
-- public Service(Class cls) {
-- try {
-- loader = new Loader2();
-- }
-- catch (NoSuchMethodError e) {
-- loader = new Loader();
-- }
-- serviceClass = cls;
-- String resName = "META-INF/services/" + serviceClass.getName();
-- configFiles = loader.getResources(resName);
-- }
--
-- public Enumeration getProviders() {
-- return new ProviderEnumeration();
-- }
--
-- synchronized private boolean moreProviders() {
-- for (;;) {
-- while (classNames == null) {
-- if (!configFiles.hasMoreElements())
-- return false;
-- classNames = parseConfigFile((URL)configFiles.nextElement());
-- }
-- while (classNames.hasMoreElements()) {
-- String className = (String)classNames.nextElement();
-- try {
-- Class cls = loader.loadClass(className);
-- Object obj = cls.newInstance();
-- if (serviceClass.isInstance(obj)) {
-- providers.addElement(obj);
-- return true;
-- }
-- }
-- catch (ClassNotFoundException e) { }
-- catch (InstantiationException e) { }
-- catch (IllegalAccessException e) { }
-- catch (LinkageError e) { }
-- }
-- classNames = null;
-- }
-- }
--
-- private static final int START = 0;
-- private static final int IN_NAME = 1;
-- private static final int IN_COMMENT = 2;
--
-- private static Enumeration parseConfigFile(URL url) {
-- try {
-- InputStream in = url.openStream();
-- Reader r;
-- try {
-- r = new InputStreamReader(in, "UTF-8");
-- }
-- catch (UnsupportedEncodingException e) {
-- r = new InputStreamReader(in, "UTF8");
-- }
-- r = new BufferedReader(r);
-- Vector tokens = new Vector();
-- StringBuffer tokenBuf = new StringBuffer();
-- int state = START;
-- for (;;) {
-- int n = r.read();
-- if (n < 0)
-- break;
-- char c = (char)n;
-- switch (c) {
-- case '\r':
-- case '\n':
-- state = START;
-- break;
-- case ' ':
-- case '\t':
-- break;
-- case '#':
-- state = IN_COMMENT;
-- break;
-- default:
-- if (state != IN_COMMENT) {
-- state = IN_NAME;
-- tokenBuf.append(c);
-- }
-- break;
-- }
-- if (tokenBuf.length() != 0 && state != IN_NAME) {
-- tokens.addElement(tokenBuf.toString());
-- tokenBuf.setLength(0);
-- }
-- }
-- if (tokenBuf.length() != 0)
-- tokens.addElement(tokenBuf.toString());
-- return tokens.elements();
-- }
-- catch (IOException e) {
-- return null;
-- }
-- }
-- }
--
--}
--
-+/**
-+ * Copyright (c) 2001, Thai Open Source Software Center Ltd
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are
-+ * met:
-+ *
-+ * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ *
-+ * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ *
-+ * Neither the name of the Thai Open Source Software Center Ltd nor
-+ * the names of its contributors may be used to endorse or promote
-+ * products derived from this software without specific prior written
-+ * permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+package org.relaxng.datatype.helpers;
-+
-+import org.relaxng.datatype.DatatypeLibraryFactory;
-+import org.relaxng.datatype.DatatypeLibrary;
-+import java.util.Enumeration;
-+import java.util.NoSuchElementException;
-+import java.util.Vector;
-+import java.io.Reader;
-+import java.io.InputStream;
-+import java.io.InputStreamReader;
-+import java.io.BufferedReader;
-+import java.io.IOException;
-+import java.io.UnsupportedEncodingException;
-+import java.net.URL;
-+
-+/**
-+ * Discovers the datatype library implementation from the classpath.
-+ *
-+ * <p>
-+ * The call of the createDatatypeLibrary method finds an implementation
-+ * from a given datatype library URI at run-time.
-+ */
-+public class DatatypeLibraryLoader implements DatatypeLibraryFactory {
-+ private final Service service = new Service(DatatypeLibraryFactory.class);
-+
-+ public DatatypeLibrary createDatatypeLibrary(String uri) {
-+ for (Enumeration e = service.getProviders();
-+ e.hasMoreElements();) {
-+ DatatypeLibraryFactory factory
-+ = (DatatypeLibraryFactory)e.nextElement();
-+ DatatypeLibrary library = factory.createDatatypeLibrary(uri);
-+ if (library != null)
-+ return library;
-+ }
-+ return null;
-+ }
-+
-+ private static class Service {
-+ private final Class serviceClass;
-+ private final Enumeration configFiles;
-+ private Enumeration classNames = null;
-+ private final Vector providers = new Vector();
-+ private Loader loader;
-+
-+ private class ProviderEnumeration implements Enumeration {
-+ private int nextIndex = 0;
-+
-+ public boolean hasMoreElements() {
-+ return nextIndex < providers.size() || moreProviders();
-+ }
-+
-+ public Object nextElement() {
-+ try {
-+ return providers.elementAt(nextIndex++);
-+ }
-+ catch (ArrayIndexOutOfBoundsException e) {
-+ throw new NoSuchElementException();
-+ }
-+ }
-+ }
-+
-+ private static class Singleton implements Enumeration {
-+ private Object obj;
-+ private Singleton(Object obj) {
-+ this.obj = obj;
-+ }
-+
-+ public boolean hasMoreElements() {
-+ return obj != null;
-+ }
-+
-+ public Object nextElement() {
-+ if (obj == null)
-+ throw new NoSuchElementException();
-+ Object tem = obj;
-+ obj = null;
-+ return tem;
-+ }
-+ }
-+
-+ // JDK 1.1
-+ private static class Loader {
-+ Enumeration getResources(String resName) {
-+ ClassLoader cl = Loader.class.getClassLoader();
-+ URL url;
-+ if (cl == null)
-+ url = ClassLoader.getSystemResource(resName);
-+ else
-+ url = cl.getResource(resName);
-+ return new Singleton(url);
-+ }
-+
-+ Class loadClass(String name) throws ClassNotFoundException {
-+ return Class.forName(name);
-+ }
-+ }
-+
-+ // JDK 1.2+
-+ private static class Loader2 extends Loader {
-+ private ClassLoader cl;
-+
-+ Loader2() {
-+ cl = Loader2.class.getClassLoader();
-+ // If the thread context class loader has the class loader
-+ // of this class as an ancestor, use the thread context class
-+ // loader. Otherwise, the thread context class loader
-+ // probably hasn't been set up properly, so don't use it.
-+ ClassLoader clt = Thread.currentThread().getContextClassLoader();
-+ for (ClassLoader tem = clt; tem != null; tem = tem.getParent())
-+ if (tem == cl) {
-+ cl = clt;
-+ break;
-+ }
-+ }
-+
-+ Enumeration getResources(String resName) {
-+ try {
-+ return cl.getResources(resName);
-+ }
-+ catch (IOException e) {
-+ return new Singleton(null);
-+ }
-+ }
-+
-+ Class loadClass(String name) throws ClassNotFoundException {
-+ return Class.forName(name, true, cl);
-+ }
-+ }
-+
-+ public Service(Class cls) {
-+ try {
-+ loader = new Loader2();
-+ }
-+ catch (NoSuchMethodError e) {
-+ loader = new Loader();
-+ }
-+ serviceClass = cls;
-+ String resName = "META-INF/services/" + serviceClass.getName();
-+ configFiles = loader.getResources(resName);
-+ }
-+
-+ public Enumeration getProviders() {
-+ return new ProviderEnumeration();
-+ }
-+
-+ synchronized private boolean moreProviders() {
-+ for (;;) {
-+ while (classNames == null) {
-+ if (!configFiles.hasMoreElements())
-+ return false;
-+ classNames = parseConfigFile((URL)configFiles.nextElement());
-+ }
-+ while (classNames.hasMoreElements()) {
-+ String className = (String)classNames.nextElement();
-+ try {
-+ Class cls = loader.loadClass(className);
-+ Object obj = cls.newInstance();
-+ if (serviceClass.isInstance(obj)) {
-+ providers.addElement(obj);
-+ return true;
-+ }
-+ }
-+ catch (ClassNotFoundException e) { }
-+ catch (InstantiationException e) { }
-+ catch (IllegalAccessException e) { }
-+ catch (LinkageError e) { }
-+ }
-+ classNames = null;
-+ }
-+ }
-+
-+ private static final int START = 0;
-+ private static final int IN_NAME = 1;
-+ private static final int IN_COMMENT = 2;
-+
-+ private static Enumeration parseConfigFile(URL url) {
-+ try {
-+ InputStream in = url.openStream();
-+ Reader r;
-+ try {
-+ r = new InputStreamReader(in, "UTF-8");
-+ }
-+ catch (UnsupportedEncodingException e) {
-+ r = new InputStreamReader(in, "UTF8");
-+ }
-+ r = new BufferedReader(r);
-+ Vector tokens = new Vector();
-+ StringBuffer tokenBuf = new StringBuffer();
-+ int state = START;
-+ for (;;) {
-+ int n = r.read();
-+ if (n < 0)
-+ break;
-+ char c = (char)n;
-+ switch (c) {
-+ case '\r':
-+ case '\n':
-+ state = START;
-+ break;
-+ case ' ':
-+ case '\t':
-+ break;
-+ case '#':
-+ state = IN_COMMENT;
-+ break;
-+ default:
-+ if (state != IN_COMMENT) {
-+ state = IN_NAME;
-+ tokenBuf.append(c);
-+ }
-+ break;
-+ }
-+ if (tokenBuf.length() != 0 && state != IN_NAME) {
-+ tokens.addElement(tokenBuf.toString());
-+ tokenBuf.setLength(0);
-+ }
-+ }
-+ if (tokenBuf.length() != 0)
-+ tokens.addElement(tokenBuf.toString());
-+ return tokens.elements();
-+ }
-+ catch (IOException e) {
-+ return null;
-+ }
-+ }
-+ }
-+
-+}
-+
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/ParameterlessDatatypeBuilder.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/ParameterlessDatatypeBuilder.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/ParameterlessDatatypeBuilder.java 2008-05-21 13:45:54.370287167 +0200
-@@ -1,42 +1,42 @@
--package org.relaxng.datatype.helpers;
--
--import org.relaxng.datatype.*;
--
--/**
-- * Dummy implementation of {@link DatatypeBuilder}.
-- *
-- * This implementation can be used for Datatypes which have no parameters.
-- * Any attempt to add parameters will be rejected.
-- *
-- * <p>
-- * Typical usage would be:
-- * <PRE><XMP>
-- * class MyDatatypeLibrary implements DatatypeLibrary {
-- * ....
-- * DatatypeBuilder createDatatypeBuilder( String typeName ) {
-- * return new ParameterleessDatatypeBuilder(createDatatype(typeName));
-- * }
-- * ....
-- * }
-- * </XMP></PRE>
-- *
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public final class ParameterlessDatatypeBuilder implements DatatypeBuilder {
--
-- /** This type object is returned for the derive method. */
-- private final Datatype baseType;
--
-- public ParameterlessDatatypeBuilder( Datatype baseType ) {
-- this.baseType = baseType;
-- }
--
-- public void addParameter( String name, String strValue, ValidationContext context )
-- throws DatatypeException {
-- throw new DatatypeException();
-- }
--
-- public Datatype createDatatype() throws DatatypeException {
-- return baseType;
-- }
--}
-+package org.relaxng.datatype.helpers;
-+
-+import org.relaxng.datatype.*;
-+
-+/**
-+ * Dummy implementation of {@link DatatypeBuilder}.
-+ *
-+ * This implementation can be used for Datatypes which have no parameters.
-+ * Any attempt to add parameters will be rejected.
-+ *
-+ * <p>
-+ * Typical usage would be:
-+ * <PRE><XMP>
-+ * class MyDatatypeLibrary implements DatatypeLibrary {
-+ * ....
-+ * DatatypeBuilder createDatatypeBuilder( String typeName ) {
-+ * return new ParameterleessDatatypeBuilder(createDatatype(typeName));
-+ * }
-+ * ....
-+ * }
-+ * </XMP></PRE>
-+ *
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public final class ParameterlessDatatypeBuilder implements DatatypeBuilder {
-+
-+ /** This type object is returned for the derive method. */
-+ private final Datatype baseType;
-+
-+ public ParameterlessDatatypeBuilder( Datatype baseType ) {
-+ this.baseType = baseType;
-+ }
-+
-+ public void addParameter( String name, String strValue, ValidationContext context )
-+ throws DatatypeException {
-+ throw new DatatypeException();
-+ }
-+
-+ public Datatype createDatatype() throws DatatypeException {
-+ return baseType;
-+ }
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/StreamingValidatorImpl.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/StreamingValidatorImpl.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/helpers/StreamingValidatorImpl.java 2008-05-21 13:45:54.370287167 +0200
-@@ -1,55 +1,55 @@
--package org.relaxng.datatype.helpers;
--
--import org.relaxng.datatype.*;
--
--/**
-- * Dummy implementation of {@link DatatypeStreamingValidator}.
-- *
-- * <p>
-- * This implementation can be used as a quick hack when the performance
-- * of streaming validation is not important. And this implementation
-- * also shows you how to implement the DatatypeStreamingValidator interface.
-- *
-- * <p>
-- * Typical usage would be:
-- * <PRE><XMP>
-- * class MyDatatype implements Datatype {
-- * ....
-- * public DatatypeStreamingValidator createStreamingValidator( ValidationContext context ) {
-- * return new StreamingValidatorImpl(this,context);
-- * }
-- * ....
-- * }
-- * </XMP></PRE>
-- *
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public final class StreamingValidatorImpl implements DatatypeStreamingValidator {
--
-- /** This buffer accumulates characters. */
-- private final StringBuffer buffer = new StringBuffer();
--
-- /** Datatype obejct that creates this streaming validator. */
-- private final Datatype baseType;
--
-- /** The current context. */
-- private final ValidationContext context;
--
-- public void addCharacters( char[] buf, int start, int len ) {
-- // append characters to the current buffer.
-- buffer.append(buf,start,len);
-- }
--
-- public boolean isValid() {
-- return baseType.isValid(buffer.toString(),context);
-- }
--
-- public void checkValid() throws DatatypeException {
-- baseType.checkValid(buffer.toString(),context);
-- }
--
-- public StreamingValidatorImpl( Datatype baseType, ValidationContext context ) {
-- this.baseType = baseType;
-- this.context = context;
-- }
--}
-+package org.relaxng.datatype.helpers;
-+
-+import org.relaxng.datatype.*;
-+
-+/**
-+ * Dummy implementation of {@link DatatypeStreamingValidator}.
-+ *
-+ * <p>
-+ * This implementation can be used as a quick hack when the performance
-+ * of streaming validation is not important. And this implementation
-+ * also shows you how to implement the DatatypeStreamingValidator interface.
-+ *
-+ * <p>
-+ * Typical usage would be:
-+ * <PRE><XMP>
-+ * class MyDatatype implements Datatype {
-+ * ....
-+ * public DatatypeStreamingValidator createStreamingValidator( ValidationContext context ) {
-+ * return new StreamingValidatorImpl(this,context);
-+ * }
-+ * ....
-+ * }
-+ * </XMP></PRE>
-+ *
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public final class StreamingValidatorImpl implements DatatypeStreamingValidator {
-+
-+ /** This buffer accumulates characters. */
-+ private final StringBuffer buffer = new StringBuffer();
-+
-+ /** Datatype obejct that creates this streaming validator. */
-+ private final Datatype baseType;
-+
-+ /** The current context. */
-+ private final ValidationContext context;
-+
-+ public void addCharacters( char[] buf, int start, int len ) {
-+ // append characters to the current buffer.
-+ buffer.append(buf,start,len);
-+ }
-+
-+ public boolean isValid() {
-+ return baseType.isValid(buffer.toString(),context);
-+ }
-+
-+ public void checkValid() throws DatatypeException {
-+ baseType.checkValid(buffer.toString(),context);
-+ }
-+
-+ public StreamingValidatorImpl( Datatype baseType, ValidationContext context ) {
-+ this.baseType = baseType;
-+ this.context = context;
-+ }
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/ValidationContext.java
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/ValidationContext.java 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/org/relaxng/datatype/ValidationContext.java 2008-05-21 13:45:54.370287167 +0200
-@@ -1,66 +1,66 @@
--package org.relaxng.datatype;
--
--/**
-- * An interface that must be implemented by caller to
-- * provide context information that is necessary to
-- * perform validation of some Datatypes.
-- *
-- * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-- * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-- */
--public interface ValidationContext {
--
-- /**
-- * Resolves a namespace prefix to the corresponding namespace URI.
-- *
-- * This method is used for validating the QName type, for example.
-- *
-- * <p>
-- * If the prefix is "" (empty string), it indicates
-- * an unprefixed value. The callee
-- * should resolve it as for an unprefixed
-- * element, rather than for an unprefixed attribute.
-- *
-- * <p>
-- * If the prefix is "xml", then the callee must resolve
-- * this prefix into "http://www.w3.org/XML/1998/namespace",
-- * as defined in the XML Namespaces Recommendation.
-- *
-- * @return
-- * namespace URI of this prefix.
-- * If the specified prefix is not declared,
-- * the implementation must return null.
-- */
-- String resolveNamespacePrefix( String prefix );
--
-- /**
-- * Returns the base URI of the context. The null string may be returned
-- * if no base URI is known.
-- */
-- String getBaseUri();
--
-- /**
-- * Checks if an unparsed entity is declared with the
-- * specified name.
-- *
-- * @return
-- * true
-- * if the DTD has an unparsed entity declaration for
-- * the specified name.
-- * false
-- * otherwise.
-- */
-- boolean isUnparsedEntity( String entityName );
--
-- /**
-- * Checks if a notation is declared with the
-- * specified name.
-- *
-- * @return
-- * true
-- * if the DTD has a notation declaration for the specified name.
-- * false
-- * otherwise.
-- */
-- boolean isNotation( String notationName );
--}
-+package org.relaxng.datatype;
-+
-+/**
-+ * An interface that must be implemented by caller to
-+ * provide context information that is necessary to
-+ * perform validation of some Datatypes.
-+ *
-+ * @author <a href="mailto:jjc@jclark.com">James Clark</a>
-+ * @author <a href="mailto:kohsuke.kawaguchi@sun.com">Kohsuke KAWAGUCHI</a>
-+ */
-+public interface ValidationContext {
-+
-+ /**
-+ * Resolves a namespace prefix to the corresponding namespace URI.
-+ *
-+ * This method is used for validating the QName type, for example.
-+ *
-+ * <p>
-+ * If the prefix is "" (empty string), it indicates
-+ * an unprefixed value. The callee
-+ * should resolve it as for an unprefixed
-+ * element, rather than for an unprefixed attribute.
-+ *
-+ * <p>
-+ * If the prefix is "xml", then the callee must resolve
-+ * this prefix into "http://www.w3.org/XML/1998/namespace",
-+ * as defined in the XML Namespaces Recommendation.
-+ *
-+ * @return
-+ * namespace URI of this prefix.
-+ * If the specified prefix is not declared,
-+ * the implementation must return null.
-+ */
-+ String resolveNamespacePrefix( String prefix );
-+
-+ /**
-+ * Returns the base URI of the context. The null string may be returned
-+ * if no base URI is known.
-+ */
-+ String getBaseUri();
-+
-+ /**
-+ * Checks if an unparsed entity is declared with the
-+ * specified name.
-+ *
-+ * @return
-+ * true
-+ * if the DTD has an unparsed entity declaration for
-+ * the specified name.
-+ * false
-+ * otherwise.
-+ */
-+ boolean isUnparsedEntity( String entityName );
-+
-+ /**
-+ * Checks if a notation is declared with the
-+ * specified name.
-+ *
-+ * @return
-+ * true
-+ * if the DTD has a notation declaration for the specified name.
-+ * false
-+ * otherwise.
-+ */
-+ boolean isNotation( String notationName );
-+}
-Index: gcc-4.2.3/libjava/classpath/external/relaxngDatatype/README.txt
-===================================================================
---- gcc-4.2.3.orig/libjava/classpath/external/relaxngDatatype/README.txt 2006-03-10 14:25:35.000000000 +0100
-+++ gcc-4.2.3/libjava/classpath/external/relaxngDatatype/README.txt 2008-05-21 13:45:54.370287167 +0200
-@@ -1,54 +1,54 @@
--======================================================================
-- README FILE FOR DATATYPE INTERFACES FOR RELAX NG
--======================================================================
--
--
--
--RELAX NG supports multiple datatype vocabularies. To achive this, an
--interface between datatype vocabularies and schema processors is
--necessary. This interface is intended to be a standard Java interface
--for this purpose.
--
--
------------------------------------------------------------------------
--LICENSE
------------------------------------------------------------------------
--
--See copying.txt.
--
--Note: this license is the BSD license.
--
--
--
------------------------------------------------------------------------
--FOR DEVELOPER
------------------------------------------------------------------------
--
--If you are planning to implement a datatype library, A sample datatype
--library implementation by James Clark is available at [1], which
--comes with documentation and source code.
--
--If you are planning to implement a schema processor, then don't forget
--to check out org.relaxng.datatype.helpers.DatatypeLibraryLoader, as
--this allows you to dynamically locate datatype implementations.
--
--
------------------------------------------------------------------------
--LINKS
------------------------------------------------------------------------
--
--* OASIS RELAX NG TC
-- http://www.oasis-open.org/committees/relax-ng/
--* RELAX home page
-- http://www.xml.gr.jp/relax/
--
--
------------------------------------------------------------------------
--REFERENCES
------------------------------------------------------------------------
--[1] Sample datatype library implementation by James Clark
-- http://www.thaiopensource.com/relaxng/datatype-sample.zip
--
--Document written by Kohsuke Kawaguchi (kohsuke.kawaguchi@sun.com)
--======================================================================
--END OF README
-+======================================================================
-+ README FILE FOR DATATYPE INTERFACES FOR RELAX NG
-+======================================================================
-+
-+
-+
-+RELAX NG supports multiple datatype vocabularies. To achive this, an
-+interface between datatype vocabularies and schema processors is
-+necessary. This interface is intended to be a standard Java interface
-+for this purpose.
-+
-+
-+----------------------------------------------------------------------
-+LICENSE
-+----------------------------------------------------------------------
-+
-+See copying.txt.
-+
-+Note: this license is the BSD license.
-+
-+
-+
-+----------------------------------------------------------------------
-+FOR DEVELOPER
-+----------------------------------------------------------------------
-+
-+If you are planning to implement a datatype library, A sample datatype
-+library implementation by James Clark is available at [1], which
-+comes with documentation and source code.
-+
-+If you are planning to implement a schema processor, then don't forget
-+to check out org.relaxng.datatype.helpers.DatatypeLibraryLoader, as
-+this allows you to dynamically locate datatype implementations.
-+
-+
-+----------------------------------------------------------------------
-+LINKS
-+----------------------------------------------------------------------
-+
-+* OASIS RELAX NG TC
-+ http://www.oasis-open.org/committees/relax-ng/
-+* RELAX home page
-+ http://www.xml.gr.jp/relax/
-+
-+
-+----------------------------------------------------------------------
-+REFERENCES
-+----------------------------------------------------------------------
-+[1] Sample datatype library implementation by James Clark
-+ http://www.thaiopensource.com/relaxng/datatype-sample.zip
-+
-+Document written by Kohsuke Kawaguchi (kohsuke.kawaguchi@sun.com)
-+======================================================================
-+END OF README
-Index: gcc-4.2.3/libstdc++-v3/config/os/gnu-linux/ctype_base.h
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/config/os/gnu-linux/ctype_base.h 2006-12-01 13:56:23.000000000 +0100
-+++ gcc-4.2.3/libstdc++-v3/config/os/gnu-linux/ctype_base.h 2008-05-21 13:45:54.370287167 +0200
-@@ -31,6 +31,8 @@
- //
- // ISO C++ 14882: 22.1 Locales
- //
-+#include <features.h>
-+#include <ctype.h>
-
- /** @file ctype_base.h
- * This is an internal header file, included by other library headers.
-@@ -45,8 +47,12 @@
- struct ctype_base
- {
- // Non-standard typedefs.
-- typedef const int* __to_type;
--
-+#ifdef __UCLIBC__
-+ typedef const __ctype_touplow_t* __to_type;
-+#else
-+ typedef const int* __to_type;
-+#endif
-+
- // NB: Offsets into ctype<char>::_M_table force a particular size
- // on the mask type. Because of this, we don't use an enum.
- typedef unsigned short mask;
-Index: gcc-4.2.3/libstdc++-v3/include/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/include/Makefile.in 2007-07-05 13:46:00.000000000 +0200
-+++ gcc-4.2.3/libstdc++-v3/include/Makefile.in 2008-05-21 13:45:54.374287956 +0200
-@@ -36,6 +36,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/fragment.am
- subdir = include
-Index: gcc-4.2.3/libstdc++-v3/libmath/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/libmath/Makefile.in 2006-10-16 21:08:22.000000000 +0200
-+++ gcc-4.2.3/libstdc++-v3/libmath/Makefile.in 2008-05-21 13:45:54.374287956 +0200
-@@ -37,6 +37,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- subdir = libmath
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-Index: gcc-4.2.3/libstdc++-v3/libsupc++/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/libsupc++/Makefile.in 2006-10-16 21:08:22.000000000 +0200
-+++ gcc-4.2.3/libstdc++-v3/libsupc++/Makefile.in 2008-05-21 13:45:54.374287956 +0200
-@@ -38,6 +38,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(glibcxxinstall_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/fragment.am
- subdir = libsupc++
-Index: gcc-4.2.3/libstdc++-v3/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/Makefile.in 2006-10-16 21:08:22.000000000 +0200
-+++ gcc-4.2.3/libstdc++-v3/Makefile.in 2008-05-21 13:45:54.374287956 +0200
-@@ -36,6 +36,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
- $(srcdir)/../config.sub $(srcdir)/../install-sh \
- $(srcdir)/../ltmain.sh $(srcdir)/../missing \
-Index: gcc-4.2.3/libstdc++-v3/po/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/po/Makefile.in 2006-10-16 21:08:22.000000000 +0200
-+++ gcc-4.2.3/libstdc++-v3/po/Makefile.in 2008-05-21 13:45:54.378287906 +0200
-@@ -36,6 +36,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/fragment.am
- subdir = po
-Index: gcc-4.2.3/libstdc++-v3/src/Makefile.in
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/src/Makefile.in 2008-05-21 13:45:47.465287535 +0200
-+++ gcc-4.2.3/libstdc++-v3/src/Makefile.in 2008-05-21 13:45:54.378287906 +0200
-@@ -36,6 +36,7 @@
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/fragment.am
- subdir = src
-Index: gcc-4.2.3/libstdc++-v3/acinclude.m4
-===================================================================
---- gcc-4.2.3.orig/libstdc++-v3/acinclude.m4 2008-05-21 13:45:43.925289703 +0200
-+++ gcc-4.2.3/libstdc++-v3/acinclude.m4 2008-05-21 13:45:54.378287906 +0200
-@@ -1392,8 +1392,8 @@
- #endif
- int main()
- {
-- const char __one[] = "Äuglein Augmen";
-- const char __two[] = "Äuglein";
-+ const char __one[] = "Äuglein Augmen";
-+ const char __two[] = "Äuglein";
- int i;
- int j;
- __locale_t loc;
projects / openwrt / staging / wigyori.git / commitdiff