brcm47xx: rename target to bcm47xx
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 7 Feb 2020 14:42:54 +0000 (15:42 +0100)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 14 Feb 2020 13:10:51 +0000 (14:10 +0100)
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
195 files changed:
package/base-files/files/etc/init.d/boot
package/kernel/broadcom-wl/Makefile
package/kernel/linux/modules/netdevices.mk
package/kernel/linux/modules/other.mk
package/kernel/linux/modules/usb.mk
package/kernel/mac80211/broadcom.mk
package/kernel/rtc-rv5c386a/Makefile
package/system/mtd/src/Makefile
package/system/mtd/src/mtd.h
package/utils/nvram/Makefile
package/utils/otrx/Makefile
target/linux/bcm47xx/Makefile [new file with mode: 0644]
target/linux/bcm47xx/base-files/etc/board.d/01_network [new file with mode: 0755]
target/linux/bcm47xx/base-files/etc/diag.sh [new file with mode: 0644]
target/linux/bcm47xx/base-files/etc/init.d/wmacfixup [new file with mode: 0755]
target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration [new file with mode: 0644]
target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc [new file with mode: 0644]
target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo [new file with mode: 0644]
target/linux/bcm47xx/base-files/lib/upgrade/platform.sh [new file with mode: 0644]
target/linux/bcm47xx/config-4.14 [new file with mode: 0644]
target/linux/bcm47xx/config-4.19 [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/100-Broadcom-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/101-Broadcom-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/104-Broadcom-ath5k.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/105-Broadcom-none.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/200-Broadcom-b44-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/201-Broadcom-b44-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/204-Broadcom-b44-ath5k.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/205-Broadcom-b44-none.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/210-Broadcom-tg3-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/211-Broadcom-tg3-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/215-Broadcom-tg3-none.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/220-Broadcom-bgmac-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/221-Broadcom-bgmac-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/225-Broadcom-bgmac-none.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/226-Broadcom-bgmac-brcsmac.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/profiles/PS-1208MFG.mk [new file with mode: 0644]
target/linux/bcm47xx/generic/target.mk [new file with mode: 0644]
target/linux/bcm47xx/image/Makefile [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/Makefile [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.c [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.h [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/Makefile [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/README [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/decompress.c [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/decompress.lds.in [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/head.S [new file with mode: 0644]
target/linux/bcm47xx/image/lzma-loader/src/loader.lds.in [new file with mode: 0644]
target/linux/bcm47xx/legacy/config-default [new file with mode: 0644]
target/linux/bcm47xx/legacy/profiles/100-Broadcom-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/legacy/profiles/101-Broadcom-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/legacy/target.mk [new file with mode: 0644]
target/linux/bcm47xx/mips74k/config-default [new file with mode: 0644]
target/linux/bcm47xx/mips74k/profiles/100-Broadcom-b43.mk [new file with mode: 0644]
target/linux/bcm47xx/mips74k/profiles/101-Broadcom-brcsmac.mk [new file with mode: 0644]
target/linux/bcm47xx/mips74k/profiles/102-Broadcom-wl.mk [new file with mode: 0644]
target/linux/bcm47xx/mips74k/profiles/103-Broadcom-none.mk [new file with mode: 0644]
target/linux/bcm47xx/mips74k/target.mk [new file with mode: 0644]
target/linux/bcm47xx/modules.mk [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/310-no_highpage.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.14/999-wl_exports.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/159-cpu_fixes.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/160-kmap_coherent.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/209-b44-register-adm-switch.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/210-b44_phy_fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/300-fork_cacheflush.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/310-no_highpage.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/610-pci_ide_fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/830-huawei_e970_support.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/831-old_gpio_wdt.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/940-bcm47xx-yenta.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch [new file with mode: 0644]
target/linux/bcm47xx/patches-4.19/999-wl_exports.patch [new file with mode: 0644]
target/linux/brcm47xx/Makefile [deleted file]
target/linux/brcm47xx/base-files/etc/board.d/01_network [deleted file]
target/linux/brcm47xx/base-files/etc/diag.sh [deleted file]
target/linux/brcm47xx/base-files/etc/init.d/wmacfixup [deleted file]
target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration [deleted file]
target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc [deleted file]
target/linux/brcm47xx/base-files/lib/preinit/01_sysinfo [deleted file]
target/linux/brcm47xx/base-files/lib/upgrade/platform.sh [deleted file]
target/linux/brcm47xx/config-4.14 [deleted file]
target/linux/brcm47xx/config-4.19 [deleted file]
target/linux/brcm47xx/generic/profiles/100-Broadcom-b43.mk [deleted file]
target/linux/brcm47xx/generic/profiles/101-Broadcom-wl.mk [deleted file]
target/linux/brcm47xx/generic/profiles/104-Broadcom-ath5k.mk [deleted file]
target/linux/brcm47xx/generic/profiles/105-Broadcom-none.mk [deleted file]
target/linux/brcm47xx/generic/profiles/200-Broadcom-b44-b43.mk [deleted file]
target/linux/brcm47xx/generic/profiles/201-Broadcom-b44-wl.mk [deleted file]
target/linux/brcm47xx/generic/profiles/204-Broadcom-b44-ath5k.mk [deleted file]
target/linux/brcm47xx/generic/profiles/205-Broadcom-b44-none.mk [deleted file]
target/linux/brcm47xx/generic/profiles/210-Broadcom-tg3-b43.mk [deleted file]
target/linux/brcm47xx/generic/profiles/211-Broadcom-tg3-wl.mk [deleted file]
target/linux/brcm47xx/generic/profiles/215-Broadcom-tg3-none.mk [deleted file]
target/linux/brcm47xx/generic/profiles/220-Broadcom-bgmac-b43.mk [deleted file]
target/linux/brcm47xx/generic/profiles/221-Broadcom-bgmac-wl.mk [deleted file]
target/linux/brcm47xx/generic/profiles/225-Broadcom-bgmac-none.mk [deleted file]
target/linux/brcm47xx/generic/profiles/226-Broadcom-bgmac-brcsmac.mk [deleted file]
target/linux/brcm47xx/generic/profiles/PS-1208MFG.mk [deleted file]
target/linux/brcm47xx/generic/target.mk [deleted file]
target/linux/brcm47xx/image/Makefile [deleted file]
target/linux/brcm47xx/image/lzma-loader/Makefile [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/Makefile [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/README [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/decompress.c [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/head.S [deleted file]
target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in [deleted file]
target/linux/brcm47xx/legacy/config-default [deleted file]
target/linux/brcm47xx/legacy/profiles/100-Broadcom-b43.mk [deleted file]
target/linux/brcm47xx/legacy/profiles/101-Broadcom-wl.mk [deleted file]
target/linux/brcm47xx/legacy/target.mk [deleted file]
target/linux/brcm47xx/mips74k/config-default [deleted file]
target/linux/brcm47xx/mips74k/profiles/100-Broadcom-b43.mk [deleted file]
target/linux/brcm47xx/mips74k/profiles/101-Broadcom-brcsmac.mk [deleted file]
target/linux/brcm47xx/mips74k/profiles/102-Broadcom-wl.mk [deleted file]
target/linux/brcm47xx/mips74k/profiles/103-Broadcom-none.mk [deleted file]
target/linux/brcm47xx/mips74k/target.mk [deleted file]
target/linux/brcm47xx/modules.mk [deleted file]
target/linux/brcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch [deleted file]
target/linux/brcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch [deleted file]
target/linux/brcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch [deleted file]
target/linux/brcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch [deleted file]
target/linux/brcm47xx/patches-4.14/159-cpu_fixes.patch [deleted file]
target/linux/brcm47xx/patches-4.14/160-kmap_coherent.patch [deleted file]
target/linux/brcm47xx/patches-4.14/209-b44-register-adm-switch.patch [deleted file]
target/linux/brcm47xx/patches-4.14/210-b44_phy_fix.patch [deleted file]
target/linux/brcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch [deleted file]
target/linux/brcm47xx/patches-4.14/300-fork_cacheflush.patch [deleted file]
target/linux/brcm47xx/patches-4.14/310-no_highpage.patch [deleted file]
target/linux/brcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch [deleted file]
target/linux/brcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch [deleted file]
target/linux/brcm47xx/patches-4.14/610-pci_ide_fix.patch [deleted file]
target/linux/brcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch [deleted file]
target/linux/brcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch [deleted file]
target/linux/brcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch [deleted file]
target/linux/brcm47xx/patches-4.14/830-huawei_e970_support.patch [deleted file]
target/linux/brcm47xx/patches-4.14/831-old_gpio_wdt.patch [deleted file]
target/linux/brcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch [deleted file]
target/linux/brcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch [deleted file]
target/linux/brcm47xx/patches-4.14/940-bcm47xx-yenta.patch [deleted file]
target/linux/brcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch [deleted file]
target/linux/brcm47xx/patches-4.14/999-wl_exports.patch [deleted file]
target/linux/brcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch [deleted file]
target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch [deleted file]
target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch [deleted file]
target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch [deleted file]
target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch [deleted file]
target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch [deleted file]
target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch [deleted file]
target/linux/brcm47xx/patches-4.19/310-no_highpage.patch [deleted file]
target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch [deleted file]
target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch [deleted file]
target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch [deleted file]
target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch [deleted file]
target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch [deleted file]
target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch [deleted file]
target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch [deleted file]
target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch [deleted file]
target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch [deleted file]
target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch [deleted file]
target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch [deleted file]
target/linux/brcm47xx/patches-4.19/999-wl_exports.patch [deleted file]

index 44311c9..21aecde 100755 (executable)
@@ -40,7 +40,7 @@ boot() {
        /sbin/kmodloader
 
        [ ! -f /etc/config/wireless ] && {
-               # compat for brcm47xx and mvebu
+               # compat for bcm47xx and mvebu
                sleep 1
        }
 
index 140107d..714cbab 100644 (file)
@@ -34,13 +34,13 @@ define Package/broadcom-wl/Default
   CATEGORY:=Kernel modules
   DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
   SUBMENU:=Proprietary BCM43xx WiFi driver
-  SUBMENUDEP:=(TARGET_brcm47xx||TARGET_brcm63xx)
+  SUBMENUDEP:=(TARGET_bcm47xx||TARGET_brcm63xx)
 endef
 
 define KernelPackage/brcm-wl/Default
   $(call Package/broadcom-wl/Default)
   SECTION:=kernel
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_brcm63xx) +wireless-tools
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_brcm63xx) +wireless-tools
   TITLE:=Kernel driver for BCM43xx chipsets
   FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
   AUTOLOAD:=$(call AutoProbe,wl)
index 9fd051d..7aa97a8 100644 (file)
@@ -704,7 +704,7 @@ $(eval $(call KernelPackage,ixgbevf))
 define KernelPackage/b44
   TITLE:=Broadcom 44xx driver
   KCONFIG:=CONFIG_B44
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx_mips74k +!TARGET_brcm47xx:kmod-ssb +kmod-mii +kmod-libphy
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx_mips74k +!TARGET_bcm47xx:kmod-ssb +kmod-mii +kmod-libphy
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/b44.ko
   AUTOLOAD:=$(call AutoLoad,19,b44,1)
@@ -759,7 +759,7 @@ define KernelPackage/tg3
   TITLE:=Broadcom Tigon3 Gigabit Ethernet
   KCONFIG:=CONFIG_TIGON3 \
        CONFIG_TIGON3_HWMON=n
-  DEPENDS:=+!TARGET_brcm47xx:kmod-libphy +kmod-ptp
+  DEPENDS:=+!TARGET_bcm47xx:kmod-libphy +kmod-ptp
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/tg3.ko
   AUTOLOAD:=$(call AutoLoad,19,tg3,1)
index d3e0627..c79f1d9 100644 (file)
@@ -418,7 +418,7 @@ $(eval $(call KernelPackage,softdog))
 define KernelPackage/ssb
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Silicon Sonics Backplane glue code
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_brcm63xx
   KCONFIG:=\
        CONFIG_SSB \
        CONFIG_SSB_B43_PCI_BRIDGE=y \
@@ -444,7 +444,7 @@ $(eval $(call KernelPackage,ssb))
 define KernelPackage/bcma
   SUBMENU:=$(OTHER_MENU)
   TITLE:=BCMA support
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
   KCONFIG:=\
        CONFIG_BCMA \
        CONFIG_BCMA_POSSIBLE=y \
index 6ea1126..135d035 100644 (file)
@@ -274,8 +274,8 @@ define KernelPackage/usb-ohci
   TITLE:=Support for OHCI controllers
   DEPENDS:= \
        +TARGET_bcm53xx:kmod-usb-bcma \
-       +TARGET_brcm47xx:kmod-usb-bcma \
-       +TARGET_brcm47xx:kmod-usb-ssb
+       +TARGET_bcm47xx:kmod-usb-bcma \
+       +TARGET_bcm47xx:kmod-usb-ssb
   KCONFIG:= \
        CONFIG_USB_OHCI \
        CONFIG_USB_OHCI_HCD \
@@ -322,7 +322,7 @@ $(eval $(call KernelPackage,usb-ohci-pci))
 
 define KernelPackage/usb-bcma
   TITLE:=Support for BCMA USB controllers
-  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
+  DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx
   HIDDEN:=1
   KCONFIG:=CONFIG_USB_HCD_BCMA
   FILES:= \
@@ -345,7 +345,7 @@ $(eval $(call KernelPackage,usb-fotg210))
 
 define KernelPackage/usb-ssb
   TITLE:=Support for SSB USB controllers
-  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+  DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx
   HIDDEN:=1
   KCONFIG:=CONFIG_USB_HCD_SSB
   FILES:= \
@@ -370,8 +370,8 @@ $(eval $(call KernelPackage,usb-ehci))
 define KernelPackage/usb2
   TITLE:=Support for USB2 controllers
   DEPENDS:=\
-       +TARGET_brcm47xx:kmod-usb-bcma \
-       +TARGET_brcm47xx:kmod-usb-ssb \
+       +TARGET_bcm47xx:kmod-usb-bcma \
+       +TARGET_bcm47xx:kmod-usb-ssb \
        +TARGET_bcm53xx:kmod-usb-bcma \
        +TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
        +TARGET_ath79:kmod-phy-ath79-usb \
index a54f17a..74d6b8d 100644 (file)
@@ -118,14 +118,14 @@ define KernelPackage/b43/config
 config PACKAGE_B43_USE_SSB
        select PACKAGE_kmod-ssb
        tristate
-       depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+       depends on !TARGET_bcm47xx && !TARGET_brcm63xx
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 
 config PACKAGE_B43_USE_BCMA
        select PACKAGE_kmod-bcma
        tristate
-       depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+       depends on !TARGET_bcm47xx && !TARGET_bcm53xx
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
 
@@ -205,8 +205,8 @@ config PACKAGE_B43_USE_BCMA
        config B43_FW_SQUASH_COREREVS
                string "Core revisions to include"
                depends on B43_FW_SQUASH
-               default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
-               default "16,28,29,30" if TARGET_brcm47xx_mips74k
+               default "5,6,7,8,9,10,11,13,15" if TARGET_bcm47xx_legacy
+               default "16,28,29,30" if TARGET_bcm47xx_mips74k
                default "5,6,7,8,9,10,11,13,15,16,28,29,30"
                help
                  This is a comma seperated list of core revision numbers.
@@ -220,8 +220,8 @@ config PACKAGE_B43_USE_BCMA
        config B43_FW_SQUASH_PHYTYPES
                string "PHY types to include"
                depends on B43_FW_SQUASH
-               default "G,N,LP" if TARGET_brcm47xx_legacy
-               default "N,HT" if TARGET_brcm47xx_mips74k
+               default "G,N,LP" if TARGET_bcm47xx_legacy
+               default "N,HT" if TARGET_bcm47xx_mips74k
                default "G,N,LP,HT"
                help
                  This is a comma seperated list of PHY types:
@@ -248,15 +248,15 @@ config PACKAGE_B43_USE_BCMA
                  This allows choosing buses that b43 should support.
 
        config PACKAGE_B43_BUSES_BCMA_AND_SSB
-               depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+               depends on !TARGET_bcm47xx_legacy && !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
                bool "BCMA and SSB"
 
        config PACKAGE_B43_BUSES_BCMA
-               depends on !TARGET_brcm47xx_legacy
+               depends on !TARGET_bcm47xx_legacy
                bool "BCMA only"
 
        config PACKAGE_B43_BUSES_SSB
-               depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+               depends on !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
                bool "SSB only"
 
        endchoice
@@ -281,7 +281,7 @@ config PACKAGE_B43_USE_BCMA
 
        config PACKAGE_B43_PHY_G
                bool "Enable support for G-PHYs"
-               default n if TARGET_brcm47xx_mips74k
+               default n if TARGET_bcm47xx_mips74k
                default y
                help
                  Enable support for G-PHY. This includes support for the following devices:
@@ -304,7 +304,7 @@ config PACKAGE_B43_USE_BCMA
 
        config PACKAGE_B43_PHY_LP
                bool "Enable support for LP-PHYs"
-               default n if TARGET_brcm47xx_mips74k
+               default n if TARGET_bcm47xx_mips74k
                default y
                help
                  Enable support for LP-PHY. This includes support for the following devices:
@@ -315,7 +315,7 @@ config PACKAGE_B43_USE_BCMA
 
        config PACKAGE_B43_PHY_HT
                bool "Enable support for HT-PHYs"
-               default n if TARGET_brcm47xx_legacy
+               default n if TARGET_bcm47xx_legacy
                default y
                help
                  Enable support for HT-PHY. This includes support for the following devices:
@@ -347,7 +347,7 @@ define KernelPackage/b43legacy
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
   KCONFIG:= \
        CONFIG_HW_RANDOM=y
-  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_brcm47xx_mips74k +b43legacy-firmware
+  DEPENDS+= +kmod-mac80211 +!(TARGET_bcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_bcm47xx_mips74k +b43legacy-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
   AUTOLOAD:=$(call AutoProbe,b43legacy)
   MENU:=1
@@ -401,7 +401,7 @@ define KernelPackage/brcmsmac
   $(call KernelPackage/mac80211/Default)
   TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_bcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
   AUTOLOAD:=$(call AutoProbe,brcmsmac)
   MENU:=1
index a268ad5..791d596 100644 (file)
@@ -15,7 +15,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define KernelPackage/rtc-rv5c386a
   SUBMENU:=Other modules
-  DEPENDS:=@TARGET_brcm47xx @!IN_SDK
+  DEPENDS:=@TARGET_bcm47xx @!IN_SDK
   TITLE:=Driver for RTC RV5C386A (used in WL-700gE and WL-HDD)
   AUTOLOAD:=$(call AutoLoad,70,rtc)
   FILES:=$(PKG_BUILD_DIR)/rtc.ko
index ffde525..7299d4d 100644 (file)
@@ -11,7 +11,7 @@ obj.ar71xx = trx.o $(obj.seama) $(obj.wrgg)
 obj.ath79 = $(obj.seama)
 obj.gemini = $(obj.wrgg)
 obj.brcm = trx.o
-obj.brcm47xx = $(obj.brcm)
+obj.bcm47xx = $(obj.brcm)
 obj.bcm53xx = $(obj.brcm) $(obj.seama)
 obj.brcm63xx = imagetag.o
 obj.ramips = $(obj.seama) $(obj.tpl) $(obj.wrg)
index 3eda615..fe716b7 100644 (file)
@@ -3,7 +3,7 @@
 
 #include <stdbool.h>
 
-#if defined(target_brcm47xx) || defined(target_bcm53xx)
+#if defined(target_bcm47xx) || defined(target_bcm53xx)
 #define target_brcm 1
 #endif
 
index ab479e3..76c254a 100644 (file)
@@ -21,7 +21,7 @@ define Package/nvram
   CATEGORY:=Base system
   TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
   MAINTAINER:=Jo-Philipp Wich <xm@subsignal.org>
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
 endef
 
 define Package/nvram/description
@@ -42,7 +42,7 @@ endef
 define Package/nvram/install
        $(INSTALL_DIR) $(1)/usr/sbin
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/
-ifneq ($(CONFIG_TARGET_brcm47xx),)
+ifneq ($(CONFIG_TARGET_bcm47xx),)
        $(INSTALL_DIR) $(1)/etc/init.d
        $(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram
 endif
index fd10b0e..2a3ac73 100644 (file)
@@ -19,7 +19,7 @@ define Package/otrx
   CATEGORY:=Base system
   TITLE:=Utility for opening (analyzing) TRX firmware images
   MAINTAINER:=Rafał Miłecki <zajec5@gmail.com>
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx)
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx)
 endef
 
 define Package/otrx/description
diff --git a/target/linux/bcm47xx/Makefile b/target/linux/bcm47xx/Makefile
new file mode 100644 (file)
index 0000000..0fb8202
--- /dev/null
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mipsel
+BOARD:=bcm47xx
+BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
+FEATURES:=squashfs usb
+SUBTARGETS:=generic mips74k legacy
+MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
+
+KERNEL_PATCHVER:=4.14
+KERNEL_TESTING_PATCHVER := 4.19
+
+define Target/Description
+       Build firmware images for Broadcom based BCM47xx/53xx routers with MIPS CPU, *not* ARM.
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += swconfig nvram otrx \
+       kmod-leds-gpio kmod-gpio-button-hotplug \
+       kmod-ledtrig-default-on kmod-ledtrig-timer kmod-ledtrig-netdev
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/bcm47xx/base-files/etc/board.d/01_network b/target/linux/bcm47xx/base-files/etc/board.d/01_network
new file mode 100755 (executable)
index 0000000..e6311d8
--- /dev/null
@@ -0,0 +1,206 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2015 OpenWrt.org
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+configure_by_vlanports() {
+       local vlan0ports="$(nvram get vlan0ports)"
+       local vlan1ports="$(nvram get vlan1ports)"
+       local vlan2ports="$(nvram get vlan2ports)"
+       local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
+
+       if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+          [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+          [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+
+       elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+            [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+            [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
+
+       elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+                [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+                [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+       elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+            [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+            [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+
+       else
+               logger -t "01_network" "Unable to determine network configuration"
+               ucidef_set_interface_lan "eth0"
+       fi
+}
+
+configure_by_boardnum() {
+       local boardnum="$1"
+
+       case "$boardnum" in
+       # WAP54G, Sitecom WL-105b
+       "2" | \
+       "1024")
+               ucidef_set_interface_lan "eth0"
+               ;;
+
+       # Generic detection fallback
+       *)
+               configure_by_vlanports
+               ;;
+       esac
+}
+
+configure_by_boardtype() {
+       local boardtype="$1"
+       local boardnum="$2"
+
+       case "$boardtype" in
+       "bcm94710r4")
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ;;
+
+       "0x0467")
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+               ;;
+
+       "0x042f" | \
+       "0x0472")
+               # WL-500gP
+               if [ "$boardnum" = "45" ]; then
+                       ucidef_add_switch "switch0" \
+                               "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+               # Generic BCM94704
+               else
+                       ucidef_set_interface_wan "eth1"
+                       ucidef_add_switch "switch0" \
+                               "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+                       # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+                       local mac="$(nvram get et0macaddr)"
+                       local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+                                 pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+                                 pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+
+                       case "$mac" in
+                       $pat)
+                               ucidef_set_interface_macaddr "lan" "$mac"
+                               ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
+                               ;;
+                       esac
+               fi
+               ;;
+
+       # Buffalo WBR-B11 and Buffalo WBR-G54
+       "bcm94710ap")
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+               ;;
+
+       *)
+               configure_by_boardnum "$boardnum"
+               ;;
+       esac
+}
+
+configure_by_model() {
+       local model="$1"
+       local boardtype="$2"
+       local boardnum="$3"
+
+       # Netgear WGT634U exception
+       if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+               return
+       fi
+
+       case "$model" in
+       "Asus WLHDD" | \
+       "Asus WL300G")
+               ucidef_set_interface_lan "eth1"
+               ;;
+
+       "Asus WL330GE")
+               ucidef_add_switch "switch0" "4:lan" "5t@eth0"
+               ;;
+
+       "Asus WL500G" | \
+       "Microsoft MN-700")
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ;;
+
+       "Asus WL500GP V2")
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0"
+               ;;
+
+       "Asus RT-N12"* | \
+       "Buffalo WHR-G125" | \
+       "D-Link DIR-330" | \
+       "Motorola WR850G" | \
+       "Siemens SE505 V2")
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+               ;;
+
+       "Asus WL700")
+               ucidef_add_switch "switch0" \
+                       "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+               ;;
+
+       "Asus WL500W" | \
+       "Dell TrueMobile 2300")
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+               ;;
+
+       "Asus RT-N16"* | \
+       "Linksys E3000 V1" | \
+       "Netgear WNR3500 V2" | \
+       "Netgear WNR3500L")
+               ucidef_add_switch "switch0" \
+                       "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
+               ;;
+
+       "Netgear WN2500RP V1")
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
+               ;;
+
+       *)
+               configure_by_boardtype "$boardtype" "$boardnum"
+               ;;
+       esac
+}
+
+
+model="$(cat /tmp/sysinfo/model)"
+boardtype="$(board_name)"
+
+case "$boardtype" in
+       *:*)
+               boardnum="${boardtype##*:}"
+               boardtype="${boardtype%:*}"
+       ;;
+esac
+
+board_config_update
+
+configure_by_model "$model" "$boardtype" "$boardnum"
+
+board_config_flush
diff --git a/target/linux/bcm47xx/base-files/etc/diag.sh b/target/linux/bcm47xx/base-files/etc/diag.sh
new file mode 100644 (file)
index 0000000..91cf4bd
--- /dev/null
@@ -0,0 +1,33 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+       for led in dmz power diag wps; do
+               status_led_file=$(find /sys/class/leds/ -name "*${led}*" | head -n1)
+               if [ ! -f $status_led_file ]; then
+                       status_led=$(basename $status_led_file)
+                       return
+               fi;
+       done
+}
+
+set_state() {
+       get_status_led
+
+       case "$1" in
+       preinit)
+               status_led_blink_preinit
+               ;;
+       failsafe)
+               status_led_blink_failsafe
+               ;;
+       preinit_regular)
+               status_led_blink_preinit_regular
+               ;;
+       done)
+               status_led_on
+               ;;
+       esac
+}
diff --git a/target/linux/bcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/bcm47xx/base-files/etc/init.d/wmacfixup
new file mode 100755 (executable)
index 0000000..ee1b752
--- /dev/null
@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010 OpenWrt.org
+
+START=41
+
+boot() {
+       [ -d /sys/class/ieee80211 ] || exit
+
+       commit=0
+
+       fixup_wmac() {
+               local cfg="$1"
+               local cfmac
+
+               config_get cfmac "$cfg" macaddr
+
+               [ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
+                       local nvmac="$(nvram get il0macaddr 2>/dev/null)"
+                       [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
+                               uci set wireless.$cfg.macaddr="$nvmac"
+                               commit=1
+                       }
+               }
+       }
+
+       config_load wireless
+       config_foreach fixup_wmac wifi-device
+
+       [ "$commit" = 1 ] && uci commit wireless
+}
+
+start() { :; }
+stop()  { :; }
diff --git a/target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration b/target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration
new file mode 100644 (file)
index 0000000..e430b41
--- /dev/null
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# Copyright (C) 2014-2015 OpenWrt.org
+#
+
+uci show network | grep "\.vlan=0"
+[ $? -ne 0 ] && exit 0
+
+logger -t network "network config is invalid, creating new one"
+
+lan_proto="$(uci -q get network.lan.proto)"
+lan_ipaddr="$(uci -q get network.lan.ipaddr)"
+lan_netmask="$(uci -q get network.lan.netmask)"
+wan_proto="$(uci -q get network.wan.proto)"
+wan_ipaddr="$(uci -q get network.wan.ipaddr)"
+wan_netmask="$(uci -q get network.wan.netmask)"
+
+echo "" > /etc/config/network
+config_generate
+
+uci set network.lan.proto=$lan_proto
+uci set network.lan.ipaddr=$lan_ipaddr
+uci set network.lan.netmask=$lan_netmask
+uci set network.wan.proto=$wan_proto
+uci set network.wan.ipaddr=$wan_ipaddr
+uci set network.wan.netmask=$wan_netmask
+uci commit network
+
+exit 0
diff --git a/target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc
new file mode 100644 (file)
index 0000000..346a532
--- /dev/null
@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+mtd fixtrx firmware
diff --git a/target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo b/target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo
new file mode 100644 (file)
index 0000000..8c7bd39
--- /dev/null
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+do_sysinfo_bcm47xx() {
+       local boardtype="$(nvram get boardtype)"
+       local boardnum="$(nvram get boardnum)"
+       local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+
+       [ -z "$model" ] && model="unknown"
+       [ -z "$boardtype" ] && boardtype="unknown"
+
+       [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+       echo "$boardtype${boardnum:+:$boardnum}" > /tmp/sysinfo/board_name
+       echo "$model" > /tmp/sysinfo/model
+}
+
+boot_hook_add preinit_main do_sysinfo_bcm47xx
diff --git a/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm47xx/base-files/lib/upgrade/platform.sh
new file mode 100644 (file)
index 0000000..45815d9
--- /dev/null
@@ -0,0 +1,247 @@
+PART_NAME=firmware
+
+LXL_FLAGS_VENDOR_LUXUL=0x00000001
+
+# $(1): file to read magic from
+# $(2): offset in bytes
+get_magic_long_at() {
+       dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
+}
+
+# $(1): file to read LE long number from
+# $(2): offset in bytes
+get_le_long_at() {
+       echo $((0x$(dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"')))
+}
+
+platform_expected_image() {
+       local model="$(cat /tmp/sysinfo/model)"
+
+       case "$model" in
+               "Netgear WGR614 V8")    echo "chk U12H072T00_NETGEAR"; return;;
+               "Netgear WGR614 V9")    echo "chk U12H094T00_NETGEAR"; return;;
+               "Netgear WGR614 V10")   echo "chk U12H139T01_NETGEAR"; return;;
+               "Netgear WN2500RP V1")  echo "chk U12H197T00_NETGEAR"; return;;
+               "Netgear WN2500RP V2")  echo "chk U12H294T00_NETGEAR"; return;;
+               "Netgear WNDR3300")     echo "chk U12H093T00_NETGEAR"; return;;
+               "Netgear WNDR3400 V1")  echo "chk U12H155T00_NETGEAR"; return;;
+               "Netgear WNDR3400 V2")  echo "chk U12H187T00_NETGEAR"; return;;
+               "Netgear WNDR3400 V3")  echo "chk U12H208T00_NETGEAR"; return;;
+               "Netgear WNDR3400 Vcna")        echo "chk U12H155T01_NETGEAR"; return;;
+               "Netgear WNDR3700 V3")  echo "chk U12H194T00_NETGEAR"; return;;
+               "Netgear WNDR4000")     echo "chk U12H181T00_NETGEAR"; return;;
+               "Netgear WNDR4500 V1")  echo "chk U12H189T00_NETGEAR"; return;;
+               "Netgear WNDR4500 V2")  echo "chk U12H224T00_NETGEAR"; return;;
+               "Netgear WNR2000 V2")   echo "chk U12H114T00_NETGEAR"; return;;
+               "Netgear WNR3500L")     echo "chk U12H136T99_NETGEAR"; return;;
+               "Netgear WNR3500U")     echo "chk U12H136T00_NETGEAR"; return;;
+               "Netgear WNR3500 V2")   echo "chk U12H127T00_NETGEAR"; return;;
+               "Netgear WNR3500 V2vc") echo "chk U12H127T70_NETGEAR"; return;;
+               "Netgear WNR834B V2")   echo "chk U12H081T00_NETGEAR"; return;;
+               "Linksys E900 V1")      echo "cybertan E900"; return;;
+               "Linksys E1000 V1")     echo "cybertan E100"; return;;
+               "Linksys E1000 V2")     echo "cybertan E100"; return;;
+               "Linksys E1000 V2.1")   echo "cybertan E100"; return;;
+               "Linksys E1200 V2")     echo "cybertan E122"; return;;
+               "Linksys E2000 V1")     echo "cybertan 32XN"; return;;
+               "Linksys E3000 V1")     echo "cybertan 61XN"; return;;
+               "Linksys E3200 V1")     echo "cybertan 3200"; return;;
+               "Linksys E4200 V1")     echo "cybertan 4200"; return;;
+               "Linksys WRT150N V1.1") echo "cybertan N150"; return;;
+               "Linksys WRT150N V1")   echo "cybertan N150"; return;;
+               "Linksys WRT160N V1")   echo "cybertan N150"; return;;
+               "Linksys WRT160N V3")   echo "cybertan N150"; return;;
+               "Linksys WRT300N V1")   echo "cybertan EWCB"; return;;
+               "Linksys WRT300N V1.1") echo "cybertan EWC2"; return;;
+               "Linksys WRT310N V1")   echo "cybertan 310N"; return;;
+               "Linksys WRT310N V2")   echo "cybertan 310N"; return;;
+               "Linksys WRT610N V1")   echo "cybertan 610N"; return;;
+               "Linksys WRT610N V2")   echo "cybertan 610N"; return;;
+               "Luxul XAP-310 V1")     echo "lxl XAP-310"; return;;
+               "Luxul XAP-1210 V1")    echo "lxl XAP-1210"; return;;
+               "Luxul XAP-1230 V1")    echo "lxl XAP-1230"; return;;
+               "Luxul XAP-1240 V1")    echo "lxl XAP-1240"; return;;
+               "Luxul XAP-1500 V1")    echo "lxl XAP-1500"; return;;
+               "Luxul ABR-4400 V1")    echo "lxl ABR-4400"; return;;
+               "Luxul XBR-4400 V1")    echo "lxl XBR-4400"; return;;
+               "Luxul XVW-P30 V1")     echo "lxl XVW-P30"; return;;
+               "Luxul XWR-600 V1")     echo "lxl XWR-600"; return;;
+               "Luxul XWR-1750 V1")    echo "lxl XWR-1750"; return;;
+       esac
+}
+
+bcm47xx_identify() {
+       local magic
+
+       magic=$(get_magic_long "$1")
+       case "$magic" in
+               "48445230")
+                       echo "trx"
+                       return
+                       ;;
+               "2a23245e")
+                       echo "chk"
+                       return
+                       ;;
+               "4c584c23")
+                       echo "lxl"
+                       return
+                       ;;
+       esac
+
+       magic=$(get_magic_long_at "$1" 14)
+       [ "$magic" = "55324e44" ] && {
+               echo "cybertan"
+               return
+       }
+
+       magic=$(get_magic_long_at "$1" 60)
+       [ "$magic" = "4c584c23" ] && {
+               echo "lxlold"
+               return
+       }
+
+       echo "unknown"
+}
+
+platform_check_image() {
+       [ "$#" -gt 1 ] && return 1
+
+       local file_type=$(bcm47xx_identify "$1")
+       local magic
+       local error=0
+
+       case "$file_type" in
+               "chk")
+                       local header_len=$((0x$(get_magic_long_at "$1" 4)))
+                       local board_id_len=$(($header_len - 40))
+                       local board_id=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
+                       local dev_board_id=$(platform_expected_image)
+                       echo "Found CHK image with device board_id $board_id"
+
+                       [ -n "$dev_board_id" -a "chk $board_id" != "$dev_board_id" ] && {
+                               echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
+                               error=1
+                       }
+
+                       if ! otrx check "$1" -o "$header_len"; then
+                               echo "No valid TRX firmware in the CHK image"
+                               notify_firmware_test_result "trx_valid" 0
+                               error=1
+                       else
+                               notify_firmware_test_result "trx_valid" 1
+                       fi
+               ;;
+               "cybertan")
+                       local pattern=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
+                       local dev_pattern=$(platform_expected_image)
+                       echo "Found CyberTAN image with device pattern: $pattern"
+
+                       [ -n "$dev_pattern" -a "cybertan $pattern" != "$dev_pattern" ] && {
+                               echo "Firmware pattern doesn't match device pattern ($dev_pattern)"
+                               error=1
+                       }
+
+                       if ! otrx check "$1" -o 32; then
+                               echo "No valid TRX firmware in the CyberTAN image"
+                               notify_firmware_test_result "trx_valid" 0
+                               error=1
+                       else
+                               notify_firmware_test_result "trx_valid" 1
+                       fi
+               ;;
+               "lxl")
+                       local hdr_len=$(get_le_long_at "$1" 8)
+                       local flags=$(get_le_long_at "$1" 12)
+                       local board=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
+                       local dev_board=$(platform_expected_image)
+                       echo "Found Luxul image for board $board"
+
+                       [ -n "$dev_board" -a "lxl $board" != "$dev_board" ] && {
+                               echo "Firmware ($board) doesn't match device ($dev_board)"
+                               error=1
+                       }
+
+                       [ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
+
+                       if ! otrx check "$1" -o "$hdr_len"; then
+                               echo "No valid TRX firmware in the Luxul image"
+                               notify_firmware_test_result "trx_valid" 0
+                               error=1
+                       else
+                               notify_firmware_test_result "trx_valid" 1
+                       fi
+               ;;
+               "lxlold")
+                       local board_id=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
+                       local dev_board_id=$(platform_expected_image)
+                       echo "Found Luxul image with device board_id $board_id"
+
+                       [ -n "$dev_board_id" -a "lxl $board_id" != "$dev_board_id" ] && {
+                               echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
+                               error=1
+                       }
+
+                       notify_firmware_no_backup
+
+                       if ! otrx check "$1" -o 64; then
+                               echo "No valid TRX firmware in the Luxul image"
+                               notify_firmware_test_result "trx_valid" 0
+                               error=1
+                       else
+                               notify_firmware_test_result "trx_valid" 1
+                       fi
+               ;;
+               "trx")
+                       if ! otrx check "$1"; then
+                               echo "Invalid (corrupted?) TRX firmware"
+                               notify_firmware_test_result "trx_valid" 0
+                               error=1
+                       else
+                               notify_firmware_test_result "trx_valid" 1
+                       fi
+               ;;
+               *)
+                       echo "Invalid image type. Please use firmware specific for this device."
+                       notify_firmware_broken
+                       error=1
+               ;;
+       esac
+
+       return $error
+}
+
+platform_trx_from_chk_cmd() {
+       local header_len=$((0x$(get_magic_long_at "$1" 4)))
+
+       echo -n dd bs=$header_len skip=1
+}
+
+platform_trx_from_cybertan_cmd() {
+       echo -n dd bs=32 skip=1
+}
+
+platform_trx_from_lxl_cmd() {
+       local hdr_len=$(get_le_long_at "$1" 8)
+
+       echo -n dd skip=$hdr_len iflag=skip_bytes
+}
+
+platform_trx_from_lxlold_cmd() {
+       echo -n dd bs=64 skip=1
+}
+
+platform_do_upgrade() {
+       local file_type=$(bcm47xx_identify "$1")
+       local trx="$1"
+       local cmd=""
+
+       case "$file_type" in
+               "chk")          cmd=$(platform_trx_from_chk_cmd "$trx");;
+               "cybertan")     cmd=$(platform_trx_from_cybertan_cmd "$trx");;
+               "lxl")          cmd=$(platform_trx_from_lxl_cmd "$trx");;
+               "lxlold")       cmd=$(platform_trx_from_lxlold_cmd "$trx");;
+       esac
+
+       default_do_upgrade "$trx" "$cmd"
+}
diff --git a/target/linux/bcm47xx/config-4.14 b/target/linux/bcm47xx/config-4.14
new file mode 100644 (file)
index 0000000..d26ef64
--- /dev/null
@@ -0,0 +1,215 @@
+CONFIG_ADM6996_PHY=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_BCM47XX_SSB=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_NFLASH=y
+CONFIG_BCMA_PFLASH=y
+CONFIG_BCMA_SFLASH=y
+# CONFIG_BGMAC_BCMA is not set
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_CPU_BMIPS is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WDT=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO_REGISTER=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_PARSER_TRX=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+# CONFIG_OF is not set
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_FSL is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DEBUG=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_HOST_SOC=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SFLASH=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_BMIPS=y
+CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
+CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/bcm47xx/config-4.19 b/target/linux/bcm47xx/config-4.19
new file mode 100644 (file)
index 0000000..8f679b3
--- /dev/null
@@ -0,0 +1,209 @@
+CONFIG_ADM6996_PHY=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_BCM47XX_SSB=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_NFLASH=y
+CONFIG_BCMA_PFLASH=y
+CONFIG_BCMA_SFLASH=y
+# CONFIG_BGMAC_BCMA is not set
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_CPU_BMIPS is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
+CONFIG_DMA_NONCOHERENT_MMAP=y
+CONFIG_DMA_NONCOHERENT_OPS=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WDT=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ARCH_COMPILER_H=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO_REGISTER=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_PARSER_TRX=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_OF is not set
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_HOST_SOC=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SFLASH=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_BMIPS=y
+CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
+CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/bcm47xx/generic/profiles/100-Broadcom-b43.mk b/target/linux/bcm47xx/generic/profiles/100-Broadcom-b43.mk
new file mode 100644 (file)
index 0000000..4c420fb
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b43
+  NAME:=Broadcom SoC, all Ethernet, BCM43xx WiFi (b43, default)
+  PACKAGES:=kmod-b44 kmod-tg3 kmod-bgmac kmod-b43 kmod-b43legacy
+endef
+
+define Profile/Broadcom-b43/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the mac80211, b43 and
+       b43legacy drivers and b44, tg3 or bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-b43))
+
diff --git a/target/linux/bcm47xx/generic/profiles/101-Broadcom-wl.mk b/target/linux/bcm47xx/generic/profiles/101-Broadcom-wl.mk
new file mode 100644 (file)
index 0000000..c3e9d20
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-wl
+  NAME:=Broadcom SoC, all Ethernet, BCM43xx WiFi (wl, proprietary)
+  PACKAGES:=-wpad-basic kmod-b44 kmod-tg3 kmod-bgmac kmod-brcm-wl wlc nas
+endef
+
+define Profile/Broadcom-wl/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the proprietary Broadcom
+       wireless "wl" driver and b44, tg3 or bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-wl))
+
diff --git a/target/linux/bcm47xx/generic/profiles/104-Broadcom-ath5k.mk b/target/linux/bcm47xx/generic/profiles/104-Broadcom-ath5k.mk
new file mode 100644 (file)
index 0000000..ca5295f
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-ath5k
+  NAME:=Broadcom SoC, all Ethernet, Atheros WiFi (ath5k)
+  PACKAGES:=kmod-b44 kmod-tg3 kmod-bgmac kmod-ath5k
+endef
+
+define Profile/Broadcom-ath5k/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC with Atheros Wifi cards using the mac80211 and ath5k drivers and
+       b44, tg3 or bgmac Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-ath5k))
+
diff --git a/target/linux/bcm47xx/generic/profiles/105-Broadcom-none.mk b/target/linux/bcm47xx/generic/profiles/105-Broadcom-none.mk
new file mode 100644 (file)
index 0000000..4497124
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-none
+  NAME:=Broadcom SoC, all Ethernet, No WiFi
+  PACKAGES:=-wpad-basic kmod-b44 kmod-tg3 kmod-bgmac
+endef
+
+define Profile/Broadcom-none/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC without any Wifi cards and b44, tg3 or bgmac Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-none))
+
diff --git a/target/linux/bcm47xx/generic/profiles/200-Broadcom-b44-b43.mk b/target/linux/bcm47xx/generic/profiles/200-Broadcom-b44-b43.mk
new file mode 100644 (file)
index 0000000..662a7c8
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b44-b43
+  NAME:=Broadcom SoC, b44 Ethernet, BCM43xx WiFi (b43, default)
+  PACKAGES:=kmod-b44 kmod-b43 kmod-b43legacy
+endef
+
+define Profile/Broadcom-b44-b43/Description
+       Package set compatible with hardware older Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the mac80211, b43 and
+       b43legacy drivers and b44 Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-b44-b43))
+
diff --git a/target/linux/bcm47xx/generic/profiles/201-Broadcom-b44-wl.mk b/target/linux/bcm47xx/generic/profiles/201-Broadcom-b44-wl.mk
new file mode 100644 (file)
index 0000000..79b7c5c
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b44-wl
+  NAME:=Broadcom SoC, b44 Ethernet, BCM43xx WiFi (wl, proprietary)
+  PACKAGES:=-wpad-basic kmod-b44 kmod-brcm-wl wlc nas
+endef
+
+define Profile/Broadcom-b44-wl/Description
+       Package set compatible with hardware older Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the proprietary Broadcom
+       wireless "wl" driver and b44 Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-b44-wl))
+
diff --git a/target/linux/bcm47xx/generic/profiles/204-Broadcom-b44-ath5k.mk b/target/linux/bcm47xx/generic/profiles/204-Broadcom-b44-ath5k.mk
new file mode 100644 (file)
index 0000000..e9dda49
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b44-ath5k
+  NAME:=Broadcom SoC, b44 Ethernet, Atheros WiFi (ath5k)
+  PACKAGES:=kmod-b44 kmod-ath5k
+endef
+
+define Profile/Broadcom-b44-ath5k/Description
+       Package set compatible with hardware older Broadcom BCM47xx or BCM535x
+       SoC with Atheros Wifi cards using the mac80211 and ath5k drivers and
+       b44 Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-b44-ath5k))
+
diff --git a/target/linux/bcm47xx/generic/profiles/205-Broadcom-b44-none.mk b/target/linux/bcm47xx/generic/profiles/205-Broadcom-b44-none.mk
new file mode 100644 (file)
index 0000000..0854b50
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b44-none
+  NAME:=Broadcom SoC, b44 Ethernet, No WiFi
+  PACKAGES:=-wpad-basic kmod-b44
+endef
+
+define Profile/Broadcom-b44-none/Description
+       Package set compatible with hardware older Broadcom BCM47xx or BCM535x
+       SoC without any Wifi cards and b44 Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-b44-none))
+
diff --git a/target/linux/bcm47xx/generic/profiles/210-Broadcom-tg3-b43.mk b/target/linux/bcm47xx/generic/profiles/210-Broadcom-tg3-b43.mk
new file mode 100644 (file)
index 0000000..a0bece9
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-tg3-b43
+  NAME:=Broadcom SoC, tg3 Ethernet, BCM43xx WiFi (b43)
+  PACKAGES:=kmod-b43 kmod-tg3
+endef
+
+define Profile/Broadcom-tg3-b43/Description
+       Package set compatible with hardware Broadcom BCM4705/BCM4785
+       SoCs with Broadcom BCM43xx Wifi cards using the mac80211 and b43
+       driver and tg3 Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-tg3-b43))
+
diff --git a/target/linux/bcm47xx/generic/profiles/211-Broadcom-tg3-wl.mk b/target/linux/bcm47xx/generic/profiles/211-Broadcom-tg3-wl.mk
new file mode 100644 (file)
index 0000000..6946668
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-tg3-wl
+  NAME:=Broadcom SoC, tg3 Ethernet, BCM43xx WiFi (wl, proprietary)
+  PACKAGES:=-wpad-basic kmod-brcm-wl wlc nas kmod-tg3
+endef
+
+define Profile/Broadcom-tg3-wl/Description
+       Package set compatible with hardware Broadcom BCM4705/BCM4785
+       SoC with Broadcom BCM43xx Wifi cards using the proprietary Broadcom
+       wireless "wl" driver and tg3 Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-tg3-wl))
+
diff --git a/target/linux/bcm47xx/generic/profiles/215-Broadcom-tg3-none.mk b/target/linux/bcm47xx/generic/profiles/215-Broadcom-tg3-none.mk
new file mode 100644 (file)
index 0000000..a5a3b4a
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-tg3-none
+  NAME:=Broadcom SoC, tg3 Ethernet, no WiFi
+  PACKAGES:=-wpad-basic kmod-tg3
+endef
+
+define Profile/Broadcom-tg3-none/Description
+       Package set compatible with hardware Broadcom BCM4705/BCM4785
+       SoC without any Wifi cards and tg3 Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-tg3-none))
+
diff --git a/target/linux/bcm47xx/generic/profiles/220-Broadcom-bgmac-b43.mk b/target/linux/bcm47xx/generic/profiles/220-Broadcom-bgmac-b43.mk
new file mode 100644 (file)
index 0000000..6ef0691
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-bgmac-b43
+  NAME:=Broadcom SoC, bgmac Ethernet, BCM43xx WiFi (b43)
+  PACKAGES:=kmod-bgmac kmod-b43
+endef
+
+define Profile/Broadcom-bgmac-b43/Description
+       Package set compatible with hardware newer Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the mac80211 and b43
+       drivers and bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-bgmac-b43))
+
diff --git a/target/linux/bcm47xx/generic/profiles/221-Broadcom-bgmac-wl.mk b/target/linux/bcm47xx/generic/profiles/221-Broadcom-bgmac-wl.mk
new file mode 100644 (file)
index 0000000..acdc20f
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-bgmac-wl
+  NAME:=Broadcom SoC, bgmac Ethernet, BCM43xx WiFi (wl, proprietary)
+  PACKAGES:=-wpad-basic kmod-bgmac kmod-brcm-wl wlc nas
+endef
+
+define Profile/Broadcom-bgmac-wl/Description
+       Package set compatible with hardware newer Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the proprietary Broadcom
+       wireless "wl" driver and bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-bgmac-wl))
+
diff --git a/target/linux/bcm47xx/generic/profiles/225-Broadcom-bgmac-none.mk b/target/linux/bcm47xx/generic/profiles/225-Broadcom-bgmac-none.mk
new file mode 100644 (file)
index 0000000..db2d1a2
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-bgmac-none
+  NAME:=Broadcom SoC, bgmac Ethernet, No WiFi
+  PACKAGES:=-wpad-basic kmod-bgmac
+endef
+
+define Profile/Broadcom-bgmac-none/Description
+       Package set compatible with hardware newer Broadcom BCM47xx or BCM535x
+       SoC without any Wifi cards and bgmac Ethernet driver.
+endef
+$(eval $(call Profile,Broadcom-bgmac-none))
+
diff --git a/target/linux/bcm47xx/generic/profiles/226-Broadcom-bgmac-brcsmac.mk b/target/linux/bcm47xx/generic/profiles/226-Broadcom-bgmac-brcsmac.mk
new file mode 100644 (file)
index 0000000..d9dc9e7
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-bgmac-brcmsmac
+  NAME:=Broadcom SoC, bgmac Ethernet, BCM43xx WiFi (brcmsmac)
+  PACKAGES:=kmod-bgmac kmod-brcmsmac
+endef
+
+define Profile/Broadcom-bgmac-brcmsmac/Description
+       Package set compatable with newer gigabit + N based bcm47xx SoCs with
+       Broadcom BCM43xx Wifi cards using the mac80211 brcmsmac driver and
+       bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-bgmac-brcmsmac))
+
diff --git a/target/linux/bcm47xx/generic/profiles/PS-1208MFG.mk b/target/linux/bcm47xx/generic/profiles/PS-1208MFG.mk
new file mode 100644 (file)
index 0000000..14ee46f
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2007-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Ps1208mfg
+  NAME:=Edimax PS-1208MFG
+  PACKAGES:=-firewall -dropbear -dnsmasq -mtd -ppp -wpad-basic kmod-b44 block-mount kmod-usb-storage kmod-usb2 kmod-usb-ohci -iptables -swconfig kmod-fs-ext4
+endef
+
+define Profile/Ps1208mfg/Description
+       Package set optimize for edimax PS-1208MFG printserver
+endef
+
+$(eval $(call Profile,Ps1208mfg))
+
diff --git a/target/linux/bcm47xx/generic/target.mk b/target/linux/bcm47xx/generic/target.mk
new file mode 100644 (file)
index 0000000..2f93778
--- /dev/null
@@ -0,0 +1,9 @@
+BOARDNAME:=Generic
+FEATURES+=pcmcia
+
+DEFAULT_PACKAGES += wpad-basic
+
+define Target/Description
+       Build generic firmware for all Broadcom BCM47xx and BCM53xx MIPS
+       devices. It runs on both architectures BMIPS3300 and MIPS 74K.
+endef
diff --git a/target/linux/bcm47xx/image/Makefile b/target/linux/bcm47xx/image/Makefile
new file mode 100644 (file)
index 0000000..432e787
--- /dev/null
@@ -0,0 +1,1070 @@
+#
+# Copyright (C) 2006-2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+USB1_PACKAGES := kmod-usb-ohci
+USB2_PACKAGES := $(USB1_PACKAGES) kmod-usb2
+
+define Build/Clean
+       $(MAKE) -C lzma-loader clean
+endef
+
+define Image/Prepare
+       # Optimized LZMA compression (with dictionary), handled by lzma-loader.
+       cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+
+       # Less optimal LZMA compression (no dictionary), handled by CFE.
+       $(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux > $(KDIR)/vmlinux-nodictionary.lzma
+
+       gzip -nc9 $(KDIR)/vmlinux > $(KDIR)/vmlinux.gz
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+       cat $(KDIR)/vmlinux-initramfs | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux-initramfs.lzma
+       $(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs-nodictionary.lzma
+endif
+       rm -f $(KDIR)/loader.gz
+       $(MAKE) -C lzma-loader \
+               BUILD_DIR="$(KDIR)" \
+               TARGET="$(KDIR)" \
+               clean install
+       echo -ne "\\x00" >> $(KDIR)/loader.gz
+       rm -f $(KDIR)/fs_mark
+       echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
+       $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+endef
+
+define trxalign/jffs2-128k
+-a 0x20000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/jffs2-64k
+-a 0x10000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/squashfs
+-a 1024 -f $(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
+endef
+
+#################################################
+# Images
+#################################################
+
+define Build/trx-with-loader
+       $(STAGING_DIR_HOST)/bin/trx \
+               -m 33554432 \
+               -o $@.new \
+               -f $(KDIR)/loader.gz \
+               -f $(IMAGE_KERNEL) \
+               $(call trxalign/$(FILESYSTEM),$@)
+       mv $@.new $@
+endef
+
+define Build/trx-v2-with-loader
+       $(STAGING_DIR_HOST)/bin/trx \
+               -2 \
+               -m 33554432 \
+               -o $@.new \
+               -f $(KDIR)/loader.gz \
+               -f $(KDIR)/vmlinux.lzma \
+               $(call trxalign/$(FILESYSTEM),$@,$@.pattern)
+       mv $@.new $@
+endef
+
+define Build/trx-without-loader
+       $(STAGING_DIR_HOST)/bin/trx \
+               -m 33554432 \
+               -o $@.new \
+               -f $(IMAGE_KERNEL) \
+               $(call trxalign/$(FILESYSTEM),$@)
+       mv $@.new $@
+endef
+
+define Build/asus-trx
+       $(STAGING_DIR_HOST)/bin/asustrx -p $(PRODUCTID) -i $@ -o $@.new
+       mv $@.new $@
+endef
+
+define Build/edimax-bin
+       $(STAGING_DIR_HOST)/bin/trx2edips $@ $@.new
+       mv $@.new $@
+endef
+
+define Build/huawei-bin
+       dd if=/dev/zero of=$@.new bs=92 count=1
+       echo -ne 'HDR0\x08\x00\x00\x00' >> $@.new
+       cat $@ >> $@.new
+       mv $@.new $@
+endef
+
+define Build/linksys-bin
+       $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(DEVICE_ID) -v v$(VERSION) $(if $(SERIAL),-s $(SERIAL)) -i $@ -o $@.new
+       mv $@.new $@
+endef
+
+define Build/linksys-pattern-partition
+       $(STAGING_DIR_HOST)/bin/addpattern -5 -p $(DEVICE_ID) -v v$(VERSION) $(if $(SERIAL),-s $(SERIAL)) -i /dev/null -o $@.pattern
+endef
+
+define Build/motorola-bin
+       $(STAGING_DIR_HOST)/bin/motorola-bin -$(MOTOROLA_DEVICE) $@ $@.new
+       mv $@.new $@
+endef
+
+define Build/prepend-with-elf
+       mv $@ $@.old
+       dd if=$(KDIR)/loader.elf of=$@ bs=131072 conv=sync
+       cat $@.old >> $@
+endef
+
+define Build/tailed-bin
+       echo $(BIN_TAIL) >> $@
+endef
+
+define Build/usrobotics-bin
+       $(STAGING_DIR_HOST)/bin/trx2usr $@ $@.new
+       mv $@.new $@
+endef
+
+#################################################
+# Devices
+#################################################
+
+DEVICE_VARS += PRODUCTID
+DEVICE_VARS += DEVICE_ID VERSION SERIAL
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
+DEVICE_VARS += MOTOROLA_DEVICE
+DEVICE_VARS += BIN_TAIL
+
+define Device/Default
+       KERNEL := kernel-bin
+       IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
+       KERNEL_NAME = vmlinux.lzma
+       KERNEL_INITRAMFS_NAME = vmlinux-initramfs.lzma
+       FILESYSTEMS := $(FS_64K)
+       IMAGES := trx
+       IMAGE/trx := append-rootfs | trx-with-loader
+endef
+
+define Device/standard
+  DEVICE_TITLE := Image with LZMA loader and LZMA compressed kernel
+endef
+
+define Device/standard-noloader-gz
+  DEVICE_TITLE := Image with gzipped kernel
+  KERNEL_NAME = vmlinux.gz
+  IMAGE/trx := append-rootfs | trx-without-loader
+endef
+
+define Device/standard-noloader-nodictionarylzma
+  DEVICE_TITLE := Image with LZMA compressed kernel matching CFE decompressor
+  KERNEL_NAME = vmlinux-nodictionary.lzma
+  IMAGE/trx := append-rootfs | trx-without-loader
+endef
+
+define Device/asus
+       DEVICE_VENDOR := ASUS
+       IMAGES := trx
+       IMAGE/trx := append-rootfs | trx-with-loader | asus-trx
+endef
+
+define Device/linksys
+       DEVICE_VENDOR := Linksys
+       IMAGES := bin
+       IMAGE/bin := append-rootfs | trx-with-loader | linksys-bin
+endef
+
+define Device/motorola
+       DEVICE_VENDOR := Motorola
+       IMAGES := bin
+       IMAGE/bin := append-rootfs | trx-with-loader | motorola-bin
+endef
+
+define Device/netgear
+       DEVICE_VENDOR := NETGEAR
+       IMAGES := chk
+       IMAGE/chk := append-rootfs | trx-with-loader | netgear-chk
+endef
+
+#################################################
+# Subtarget generic
+#################################################
+
+ifeq ($(SUBTARGET),generic)
+  # BCM4705 with tg3
+define Device/linksys-wrt300n-v1.1
+  DEVICE_MODEL := WRT300N
+  DEVICE_VARIANT := v1.1
+  DEVICE_PACKAGES := kmod-tg3 kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := EWC2
+  VERSION := 1.51.2
+endef
+TARGET_DEVICES += linksys-wrt300n-v1.1
+
+define Device/linksys-wrt310n-v1
+  DEVICE_MODEL := WRT310N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-tg3 kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 310N
+  VERSION := 1.0.10
+endef
+TARGET_DEVICES += linksys-wrt310n-v1
+
+define Device/linksys-wrt350n-v1
+  DEVICE_MODEL := WRT350N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-tg3 kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := EWCG
+  VERSION := 1.04.1
+endef
+TARGET_DEVICES += linksys-wrt350n-v1
+
+define Device/linksys-wrt610n-v1
+  DEVICE_MODEL := WRT610N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-tg3 kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := 610N
+  VERSION := 1.0.1
+endef
+TARGET_DEVICES += linksys-wrt610n-v1
+
+  # BCMA SoC with SSB WiFi
+define Device/linksys-wrt610n-v2
+  DEVICE_MODEL := WRT610N
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-bgmac kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := 610N
+  VERSION := 2.0.0
+endef
+TARGET_DEVICES += linksys-wrt610n-v2
+
+define Device/linksys-e3000-v1
+  DEVICE_MODEL := E3000
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-bgmac kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := 61XN
+  VERSION := 1.0.3
+endef
+TARGET_DEVICES += linksys-e3000-v1
+
+# generic has Ethernet drivers as modules so overwrite standard image
+define Device/standard
+  DEVICE_TITLE := Image with LZMA loader and LZMA compressed kernel
+  DEVICE_PACKAGES := kmod-b44 kmod-bgmac kmod-tg3
+endef
+TARGET_DEVICES += standard
+endif
+
+#################################################
+# Subtarget legacy
+#################################################
+
+ifeq ($(SUBTARGET),legacy)
+
+define Device/asus-wl-300g
+  DEVICE_MODEL := WL-300g
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy
+  $(Device/asus)
+  PRODUCTID := "WL300g      "
+endef
+TARGET_DEVICES += asus-wl-300g
+
+define Device/asus-wl-320gp
+  DEVICE_MODEL := WL-320gP
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := "WL320gP     "
+endef
+TARGET_DEVICES += asus-wl-320gp
+
+define Device/asus-wl-330ge
+  DEVICE_MODEL := WL-330gE
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := "WL-330gE    "
+endef
+TARGET_DEVICES += asus-wl-330ge
+
+define Device/asus-wl-500gd
+  DEVICE_MODEL := WL-500g Deluxe
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := "WL500gx     "
+endef
+TARGET_DEVICES += asus-wl-500gd
+
+define Device/asus-wl-500gp-v1
+  DEVICE_MODEL := WL-500gP
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := "WL500gp     "
+endef
+TARGET_DEVICES += asus-wl-500gp-v1
+
+define Device/asus-wl-500gp-v2
+  DEVICE_MODEL := WL-500gP
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := "WL500gpv2   "
+endef
+TARGET_DEVICES += asus-wl-500gp-v2
+
+define Device/asus-wl-500w
+  DEVICE_MODEL := WL-500W
+  DEVICE_PACKAGES := kmod-b43 kmod-usb-uhci kmod-usb2-pci
+  $(Device/asus)
+  PRODUCTID := "WL500W      "
+endef
+TARGET_DEVICES += asus-wl-500w
+
+define Device/asus-wl-520gu
+  DEVICE_MODEL := WL-520gU
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := "WL520gu     "
+endef
+TARGET_DEVICES += asus-wl-520gu
+
+define Device/asus-wl-550ge
+  DEVICE_MODEL := WL-550gE
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := "WL550gE     "
+endef
+TARGET_DEVICES += asus-wl-550ge
+
+define Device/asus-wl-hdd25
+  DEVICE_MODEL := WL-HDD25
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy $(USB1_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := "WLHDD       "
+endef
+TARGET_DEVICES += asus-wl-hdd25
+
+define Device/dlink-dwl-3150
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DWL-3150
+  IMAGES := bin
+  IMAGE/bin := append-rootfs | trx-with-loader | tailed-bin
+  BIN_TAIL := BCM-5352-2050-0000000-01
+endef
+TARGET_DEVICES += dlink-dwl-3150
+
+define Device/edimax-ps1208-mfg
+  DEVICE_VENDOR := Edimax
+  DEVICE_MODEL := PS-1208MFg
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  IMAGES := bin
+  IMAGE/bin := append-rootfs | trx-with-loader | edimax-bin
+endef
+TARGET_DEVICES += edimax-ps1208-mfg
+
+define Device/huawei-e970
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := E970
+  DEVICE_PACKAGES := kmod-b43
+  KERNEL_NAME = vmlinux.gz
+  IMAGES := bin
+  IMAGE/bin := append-rootfs | trx-without-loader | huawei-bin
+endef
+TARGET_DEVICES += huawei-e970
+
+define Device/linksys-wrt54g3g
+  DEVICE_MODEL := WRT54G3G
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := W54F
+  VERSION := 2.20.1
+endef
+TARGET_DEVICES += linksys-wrt54g3g
+
+define Device/linksys-wrt54g3g-em
+  DEVICE_MODEL := WRT54G3G-EM
+  $(Device/linksys)
+  DEVICE_ID := W3GN
+  VERSION := 2.20.1
+endef
+TARGET_DEVICES += linksys-wrt54g3g-em
+
+define Device/linksys-wrt54g3gv2-vf
+  DEVICE_VENDOR := Linksys
+  DEVICE_MODEL := WRT54G3GV2-VF
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  FILESYSTEMS := $(FS_128K)
+  IMAGES := noheader.bin bin
+  IMAGE/noheader.bin := linksys-pattern-partition | append-rootfs | trx-v2-with-loader
+  IMAGE/bin := linksys-pattern-partition | append-rootfs | trx-v2-with-loader | linksys-bin
+  DEVICE_ID := 3G2V
+  VERSION := 3.00.24
+  SERIAL := 6
+endef
+TARGET_DEVICES += linksys-wrt54g3gv2-vf
+
+define Device/linksys-wrt54g
+  DEVICE_MODEL := WRT54G
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy
+  $(Device/linksys)
+  DEVICE_ID := W54G
+  VERSION := 4.71.1
+endef
+TARGET_DEVICES += linksys-wrt54g
+
+define Device/linksys-wrt54gs
+  DEVICE_MODEL := WRT54GS
+  DEVICE_VARIANT := v1/v2/v3
+  DEVICE_ALT0_VENDOR := Linksys
+  DEVICE_ALT0_MODEL := WRT54G-TM
+  DEVICE_ALT0_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  FILESYSTEMS := $(FS_128K)
+  DEVICE_ID := W54S
+  VERSION := 4.80.1
+endef
+TARGET_DEVICES += linksys-wrt54gs
+
+define Device/linksys-wrt54gs-v4
+  DEVICE_MODEL := WRT54GS
+  DEVICE_VARIANT := v4
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := W54s
+  VERSION := 1.09.1
+endef
+TARGET_DEVICES += linksys-wrt54gs-v4
+
+define Device/linksys-wrtsl54gs
+  DEVICE_MODEL := WRTSL54GS
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  FILESYSTEMS := $(FS_128K)
+  DEVICE_ID := W54U
+  VERSION := 2.08.1
+endef
+TARGET_DEVICES += linksys-wrtsl54gs
+
+define Device/linksys-wrt150n
+  DEVICE_MODEL := WRT150N
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := N150
+  VERSION := 1.51.3
+endef
+TARGET_DEVICES += linksys-wrt150n
+
+define Device/linksys-wrt160n-v1
+  DEVICE_MODEL := WRT160N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := N150
+  VERSION := 1.50.1
+endef
+TARGET_DEVICES += linksys-wrt160n-v1
+
+define Device/linksys-wrt300n-v1
+  DEVICE_MODEL := WRT300N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  IMAGES := bin trx
+  DEVICE_ID := EWCB
+  VERSION := 1.03.6
+endef
+TARGET_DEVICES += linksys-wrt300n-v1
+
+define Device/motorola-wa840g
+  DEVICE_MODEL := WA840G
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy
+  $(Device/motorola)
+  MOTOROLA_DEVICE := 2
+endef
+TARGET_DEVICES += motorola-wa840g
+
+define Device/motorola-we800g
+  DEVICE_MODEL := WE800G
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy
+  $(Device/motorola)
+  MOTOROLA_DEVICE := 3
+endef
+TARGET_DEVICES += motorola-we800g
+
+define Device/motorola-wr850g
+  DEVICE_MODEL := WR850G
+  DEVICE_PACKAGES := kmod-b43 kmod-b43legacy
+  $(Device/motorola)
+  MOTOROLA_DEVICE := 1
+endef
+TARGET_DEVICES += motorola-wr850g
+
+define Device/netgear-wgr614-v8
+  DEVICE_MODEL := WGR614
+  DEVICE_VARIANT := v8
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H072T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wgr614-v8
+
+define Device/netgear-wgt634u
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := WGT634U
+  DEVICE_PACKAGES := kmod-ath5k $(USB2_PACKAGES)
+  FILESYSTEMS := $(FS_128K)
+  IMAGES := bin
+  IMAGE/bin := append-rootfs | trx-with-loader | prepend-with-elf
+endef
+TARGET_DEVICES += netgear-wgt634u
+
+define Device/netgear-wndr3300-v1
+  DEVICE_MODEL := WNDR3300
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H093T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wndr3300-v1
+
+define Device/netgear-wnr834b-v2
+  DEVICE_MODEL := WNR834B
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H081T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wnr834b-v2
+
+define Device/usrobotics-usr5461
+  DEVICE_VENDOR := US Robotics
+  DEVICE_MODEL := USR5461
+  DEVICE_PACKAGES := kmod-b43 $(USB1_PACKAGES)
+  IMAGES := bin
+  IMAGE/bin := append-rootfs | trx-with-loader | usrobotics-bin
+endef
+TARGET_DEVICES += usrobotics-usr5461
+
+TARGET_DEVICES += standard standard-noloader-gz
+endif
+
+#################################################
+# Subtarget mips74k
+#################################################
+
+ifeq ($(SUBTARGET),mips74k)
+define Device/asus-rt-ac53u
+  DEVICE_MODEL := RT-AC53U
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-AC53U
+endef
+TARGET_DEVICES += asus-rt-ac53u
+
+define Device/asus-rt-ac66u
+  DEVICE_MODEL := RT-AC66U
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-AC66U
+endef
+#  TARGET_DEVICES += asus-rt-ac66u
+
+define Device/asus-rt-n10
+  DEVICE_MODEL := RT-N10
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := "RT-N10      "
+endef
+TARGET_DEVICES += asus-rt-n10
+
+define Device/asus-rt-n10p
+  DEVICE_MODEL := RT-N10P
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := RT-N10P
+endef
+TARGET_DEVICES += asus-rt-n10p
+
+define Device/asus-rt-n10p-v2
+  DEVICE_MODEL := RT-N10P
+  DEVICE_VARIANT := v2
+  $(Device/asus)
+  PRODUCTID := RT-N10PV2
+endef
+TARGET_DEVICES += asus-rt-n10p-v2
+
+define Device/asus-rt-n10u
+  DEVICE_MODEL := RT-N10U
+  DEVICE_VARIANT := A
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N10U
+endef
+TARGET_DEVICES += asus-rt-n10u
+
+define Device/asus-rt-n10u-b
+  DEVICE_MODEL := RT-N10U
+  DEVICE_VARIANT := B
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N10U
+endef
+TARGET_DEVICES += asus-rt-n10u-b
+
+define Device/asus-rt-n12
+  DEVICE_MODEL := RT-N12
+  DEVICE_VARIANT := A1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := "RT-N12      "
+endef
+TARGET_DEVICES += asus-rt-n12
+
+define Device/asus-rt-n12-b1
+  DEVICE_MODEL := RT-N12
+  DEVICE_VARIANT := B1
+  $(Device/asus)
+  PRODUCTID := RT-N12B1
+endef
+TARGET_DEVICES += asus-rt-n12-b1
+
+define Device/asus-rt-n12-c1
+  DEVICE_MODEL := RT-N12
+  DEVICE_VARIANT := C1
+  $(Device/asus)
+  PRODUCTID := RT-N12C1
+endef
+TARGET_DEVICES += asus-rt-n12-c1
+
+define Device/asus-rt-n12-d1
+  DEVICE_MODEL := RT-N12
+  DEVICE_VARIANT := D1
+  $(Device/asus)
+  PRODUCTID := RT-N12D1
+endef
+TARGET_DEVICES += asus-rt-n12-d1
+
+define Device/asus-rt-n12hp
+  DEVICE_MODEL := RT-N12HP
+  $(Device/asus)
+  PRODUCTID := RT-N12HP
+endef
+TARGET_DEVICES += asus-rt-n12hp
+
+define Device/asus-rt-n14uhp
+  DEVICE_MODEL := RT-N14UHP
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N14UHP
+endef
+TARGET_DEVICES += asus-rt-n14uhp
+
+define Device/asus-rt-n15u
+  DEVICE_MODEL := RT-N15U
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N15U
+endef
+TARGET_DEVICES += asus-rt-n15u
+
+define Device/asus-rt-n16
+  DEVICE_MODEL := RT-N16
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N16
+endef
+TARGET_DEVICES += asus-rt-n16
+
+define Device/asus-rt-n53
+  DEVICE_MODEL := RT-N53
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/asus)
+  PRODUCTID := RT-N53
+endef
+TARGET_DEVICES += asus-rt-n53
+
+define Device/asus-rt-n66u
+  DEVICE_MODEL := RT-N66U
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N66U
+endef
+TARGET_DEVICES += asus-rt-n66u
+
+define Device/asus-rt-n66w
+  DEVICE_MODEL := RT-N66W
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/asus)
+  PRODUCTID := RT-N66U
+endef
+TARGET_DEVICES += asus-rt-n66w
+
+define Device/linksys-wrt160n-v3
+  DEVICE_MODEL := WRT160N
+  DEVICE_VARIANT := v3
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := N150
+  VERSION := 3.0.3
+endef
+TARGET_DEVICES += linksys-wrt160n-v3
+
+define Device/linksys-wrt310n-v2
+  DEVICE_MODEL := WRT310N
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 310N
+  VERSION := 2.0.1
+endef
+TARGET_DEVICES += linksys-wrt310n-v2
+
+define Device/linksys-wrt320n-v1
+  DEVICE_MODEL := WRT320N
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 320N
+  VERSION := 1.0.5
+endef
+TARGET_DEVICES += linksys-wrt320n-v1
+
+define Device/linksys-e900-v1
+  DEVICE_MODEL := E900
+  DEVICE_VARIANT := v1
+  $(Device/linksys)
+  DEVICE_ID := E900
+  VERSION := 1.0.4
+endef
+TARGET_DEVICES += linksys-e900-v1
+
+define Device/linksys-e1000
+  DEVICE_MODEL := E1000
+  DEVICE_VARIANT := v1/v2/v2.1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := E100
+  VERSION := 1.1.3
+endef
+TARGET_DEVICES += linksys-e1000
+
+define Device/linksys-e1200-v1
+  DEVICE_MODEL := E1200
+  DEVICE_VARIANT := v1
+  $(Device/linksys)
+  DEVICE_ID := E120
+  VERSION := 1.0.3
+endef
+TARGET_DEVICES += linksys-e1200-v1
+
+define Device/linksys-e1200-v2
+  DEVICE_MODEL := E1200
+  DEVICE_VARIANT := v2
+  $(Device/linksys)
+  DEVICE_ID := E122
+  VERSION := 1.0.4
+endef
+TARGET_DEVICES += linksys-e1200-v2
+
+define Device/linksys-e1500-v1
+  DEVICE_MODEL := E1500
+  DEVICE_VARIANT := v1
+  $(Device/linksys)
+  DEVICE_ID := E150
+  VERSION := 1.0.5
+endef
+TARGET_DEVICES += linksys-e1500-v1
+
+define Device/linksys-e1550-v1
+  DEVICE_MODEL := E1550
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := 1550
+  VERSION := 1.0.3
+endef
+TARGET_DEVICES += linksys-e1550-v1
+
+define Device/linksys-e2000-v1
+  DEVICE_MODEL := E2000
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 32XN
+  VERSION := 1.0.4
+endef
+TARGET_DEVICES += linksys-e2000-v1
+
+define Device/linksys-e2500-v1
+  DEVICE_MODEL := E2500
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := E25X
+  VERSION := 1.0.7
+endef
+TARGET_DEVICES += linksys-e2500-v1
+
+define Device/linksys-e2500-v2
+  DEVICE_MODEL := E2500
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := E25X
+  VERSION := 2.0.0
+endef
+TARGET_DEVICES += linksys-e2500-v2
+
+define Device/linksys-e2500-v2.1
+  DEVICE_MODEL := E2500
+  DEVICE_VARIANT := v2.1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 25RU
+  VERSION := 2.1.0
+endef
+TARGET_DEVICES += linksys-e2500-v2.1
+
+define Device/linksys-e2500-v3
+  DEVICE_MODEL := E2500
+  DEVICE_VARIANT := v3
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 25V3
+  VERSION := 3.0.0
+endef
+TARGET_DEVICES += linksys-e2500-v3
+
+define Device/linksys-e3200-v1
+  DEVICE_MODEL := E3200
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/linksys)
+  DEVICE_ID := 3200
+  VERSION := 1.0.1
+endef
+TARGET_DEVICES += linksys-e3200-v1
+
+define Device/linksys-e4200-v1
+  DEVICE_MODEL := E4200
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/linksys)
+  DEVICE_ID := 4200
+  VERSION := 1.0.5
+endef
+TARGET_DEVICES += linksys-e4200-v1
+
+define Device/netgear-wgr614-v10-na
+  DEVICE_MODEL := WGR614
+  DEVICE_VARIANT := v10 (NA)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H139T01_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wgr614-v10-na
+
+define Device/netgear-wgr614-v10
+  DEVICE_MODEL := WGR614
+  DEVICE_VARIANT := v10
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H139T01_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wgr614-v10
+
+define Device/netgear-wn2500rp-v1
+  DEVICE_MODEL := WN2500RP
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H197T00_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wn2500rp-v1
+
+define Device/netgear-wn3000rp
+  DEVICE_MODEL := WN3000RP
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H163T01_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wn3000rp
+
+define Device/netgear-wndr3400-v1
+  DEVICE_MODEL := WNDR3400
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H155T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wndr3400-v1
+
+define Device/netgear-wndr3400-v2
+  DEVICE_MODEL := WNDR3400
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H187T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wndr3400-v2
+
+define Device/netgear-wndr3400-v3
+  DEVICE_MODEL := WNDR3400
+  DEVICE_VARIANT := v3
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H208T00_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wndr3400-v3
+
+define Device/netgear-wndr3700-v3
+  DEVICE_MODEL := WNDR3700
+  DEVICE_VARIANT := v3
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H194T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wndr3700-v3
+
+define Device/netgear-wndr3400-vcna
+  DEVICE_MODEL := WNDR3400
+  DEVICE_VARIANT := vcna
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H155T01_NETGEAR
+  NETGEAR_REGION := 2
+endef
+#  TARGET_DEVICES += netgear-wndr3400-vcna
+
+define Device/netgear-wndr4000
+  DEVICE_MODEL := WNDR4000
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H181T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wndr4000
+
+define Device/netgear-wnr1000-v3
+  DEVICE_MODEL := WNR1000
+  DEVICE_VARIANT := v3
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H139T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wnr1000-v3
+
+define Device/netgear-wnr2000v2
+  DEVICE_MODEL := WNR2000
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H114T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wnr2000v2
+
+define Device/netgear-wnr3500l-v1-na
+  DEVICE_MODEL := WNR3500L
+  DEVICE_VARIANT := v1 (NA)
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H136T99_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wnr3500l-v1-na
+
+define Device/netgear-wnr3500l-v1
+  DEVICE_MODEL := WNR3500L
+  DEVICE_VARIANT := v1 (ROW)
+  DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H136T99_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wnr3500l-v1
+
+define Device/netgear-wnr3500l-v2
+  DEVICE_MODEL := WNR3500L
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H172T00_NETGEAR
+  NETGEAR_REGION := 1
+endef
+TARGET_DEVICES += netgear-wnr3500l-v2
+
+define Device/netgear-wnr3500u
+  DEVICE_MODEL := WNR3500U
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H136T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+#  TARGET_DEVICES += netgear-wnr3500u
+
+define Device/netgear-wnr3500-v2
+  DEVICE_MODEL := WNR3500
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H127T00_NETGEAR
+  NETGEAR_REGION := 2
+endef
+TARGET_DEVICES += netgear-wnr3500-v2
+
+define Device/netgear-wnr3500-v2-vc
+  DEVICE_MODEL := WNR3500
+  DEVICE_VARIANT := v2 (VC)
+  DEVICE_PACKAGES := kmod-b43
+  $(Device/netgear)
+  NETGEAR_BOARD_ID := U12H127T70_NETGEAR
+  NETGEAR_REGION := 2
+endef
+#  TARGET_DEVICES += netgear-wnr3500-v2-vc
+
+TARGET_DEVICES += standard standard-noloader-nodictionarylzma
+endif
+
+#################################################
+# Shared BuildImage defines
+#################################################
+
+define Image/Build/Initramfs
+       $(STAGING_DIR_HOST)/bin/trx \
+               -m 33554432 \
+               -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx \
+               -f $(KDIR)/loader.gz \
+               -f $(KDIR)/vmlinux-initramfs.lzma
+       $(STAGING_DIR_HOST)/bin/trx \
+               -m 33554432 \
+               -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs-noloader-nodictionary.trx \
+               -f $(KDIR)/vmlinux-initramfs-nodictionary.lzma
+endef
+
+# $(1): filesystem type.
+define Image/Build
+       # TODO: Move it to Device/*
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+       $(call Image/Build/Initramfs)
+endif
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/bcm47xx/image/lzma-loader/Makefile b/target/linux/bcm47xx/image/lzma-loader/Makefile
new file mode 100644 (file)
index 0000000..5dd6f50
--- /dev/null
@@ -0,0 +1,33 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+       mkdir $(PKG_BUILD_DIR)
+       $(CP) ./src/* $(PKG_BUILD_DIR)/
+       touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+       $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+               LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download: 
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+       $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+       rm -rf $(PKG_BUILD_DIR)
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.c
new file mode 100644 (file)
index 0000000..951700b
--- /dev/null
@@ -0,0 +1,663 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder
+  
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  int Result;
+  #endif
+  int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+  if (rd->Buffer == rd->BufferLim)
+  {
+    #ifdef _LZMA_IN_CB
+    UInt32 size;
+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+    rd->BufferLim = rd->Buffer + size;
+    if (size == 0)
+    #endif
+    {
+      rd->ExtraBytes = 1;
+      return 0xFF;
+    }
+  }
+  return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    Byte *stream, UInt32 bufferSize
+  #endif
+    )
+{
+  int i;
+  #ifdef _LZMA_IN_CB
+  rd->InCallback = inCallback;
+  rd->Buffer = rd->BufferLim = 0;
+  #else
+  rd->Buffer = stream;
+  rd->BufferLim = stream + bufferSize;
+  #endif
+  rd->ExtraBytes = 0;
+  rd->Code = 0;
+  rd->Range = (0xFFFFFFFF);
+  for(i = 0; i < 5; i++)
+    rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+  RC_INIT_VAR
+  UInt32 result = 0;
+  int i;
+  for (i = numTotalBits; i > 0; i--)
+  {
+    /* UInt32 t; */
+    range >>= 1;
+
+    result <<= 1;
+    if (code >= range)
+    {
+      code -= range;
+      result |= 1;
+    }
+    /*
+    t = (code - range) >> 31;
+    t &= 1;
+    code -= range & (t - 1);
+    result = (result + result) | (1 - t);
+    */
+    RC_NORMALIZE
+  }
+  RC_FLUSH_VAR
+  return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+  if (rd->Code < bound)
+  {
+    rd->Range = bound;
+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 0;
+  }
+  else
+  {
+    rd->Range -= bound;
+    rd->Code -= bound;
+    *prob -= (*prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 1;
+  }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+  if (code < bound) \
+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+  else \
+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+  RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = numLevels; i > 0; i--)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT(prob, mi)
+    #else
+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  int symbol = 0;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = 0; i < numLevels; i++)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+    #else
+    int bit = RangeDecoderBitDecode(probs + mi, rd);
+    mi = mi + mi + bit;
+    symbol |= (bit << i);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + symbol;
+    RC_GET_BIT(prob, symbol)
+    #else
+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+    #endif
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    int bit;
+    int matchBit = (matchByte >> 7) & 1;
+    matchByte <<= 1;
+    #ifdef _LZMA_LOC_OPT
+    {
+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+    }
+    #else
+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+    symbol = (symbol << 1) | bit;
+    #endif
+    if (matchBit != bit)
+    {
+      while (symbol < 0x100)
+      {
+        #ifdef _LZMA_LOC_OPT
+        CProb *prob = probs + symbol;
+        RC_GET_BIT(prob, symbol)
+        #else
+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+        #endif
+      }
+      break;
+    }
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+    return RangeDecoderBitTreeDecode(p + LenLow +
+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
+  return kLenNumLowSymbols + kLenNumMidSymbols + 
+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  CRangeDecoder RangeDecoder;
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int PreviousIsMatch;
+  int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->PreviousIsMatch = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&vs->RangeDecoder, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+  );
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  CRangeDecoder rd = vs->RangeDecoder;
+  int state = vs->State;
+  int previousIsMatch = vs->PreviousIsMatch;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len > 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+  CRangeDecoder rd;
+  UInt32 i;
+  int state = 0;
+  int previousIsMatch = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&rd, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+      );
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+    #ifdef _LZMA_IN_CB
+    if (rd.Result != LZMA_RESULT_OK)
+      return rd.Result;
+    #endif
+    if (rd.ExtraBytes != 0)
+      return LZMA_RESULT_DATA_ERROR;
+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+    {
+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+      if (previousIsMatch)
+      {
+        Byte matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+        previousIsMatch = 0;
+      }
+      else
+        previousByte = LzmaLiteralDecode(probs, &rd);
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+    }
+    else             
+    {
+      previousIsMatch = 1;
+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+      {
+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+        {
+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            if (
+               (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+               )
+               == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < 7 ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+            distance = rep1;
+          else 
+          {
+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+              distance = rep2;
+            else
+            {
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+        state = state < 7 ? 8 : 11;
+      }
+      else
+      {
+        int posSlot;
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < 7 ? 7 : 10;
+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits), kNumPosSlotBits, &rd);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 += RangeDecoderReverseBitTreeDecode(
+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+          }
+          else
+          {
+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
+                numDirectBits - kNumAlignBits) << kNumAlignBits;
+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+          }
+        }
+        else
+          rep0 = posSlot;
+        rep0++;
+      }
+      if (rep0 == (UInt32)(0))
+      {
+        /* it's for stream version */
+        len = -1;
+        break;
+      }
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+      {
+        return LZMA_RESULT_DATA_ERROR;
+      }
+      len += kMatchMinLen;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        outStream[nowPos++] = previousByte;
+        len--;
+      }
+      while(len > 0 && nowPos < outSize);
+    }
+  }
+
+  #ifdef _LZMA_OUT_READ
+  vs->RangeDecoder = rd;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->PreviousIsMatch = previousIsMatch;
+  vs->RemainLen = len;
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/bcm47xx/image/lzma-loader/src/LzmaDecode.h
new file mode 100644 (file)
index 0000000..f58944e
--- /dev/null
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/Makefile b/target/linux/bcm47xx/image/lzma-loader/src/Makefile
new file mode 100644 (file)
index 0000000..a08fc05
--- /dev/null
@@ -0,0 +1,78 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START     := 0x80001000
+BZ_TEXT_START  := 0x80600000
+BZ_STACK_START := 0x80700000
+
+OBJCOPY                := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS         = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+                 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+                 -ffunction-sections -pipe -mlong-calls -fno-common \
+                 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS         += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS                = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) -DBZ_STACK_START=$(BZ_STACK_START)
+
+SEDFLAGS       := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/BZ_STACK_START/$(BZ_STACK_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS                := head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+       gzip -nc9 $< > $@
+
+loader.elf: loader.o
+       cp $< $@
+
+loader: loader.o
+       $(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+       $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+       @sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+       $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+       @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+       $(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+       $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+       @sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+       rm -f loader.gz loader decompress *.lds *.o *.image
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/README b/target/linux/bcm47xx/image/lzma-loader/src/README
new file mode 100644 (file)
index 0000000..16649e9
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+       0.02    Initial release
+       0.03    Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+               output size to decoder (stream mode compressed input is not 
+               a requirement anymore)
+       0.04    Reordered functions using lds script
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/decompress.c b/target/linux/bcm47xx/image/lzma-loader/src/decompress.c
new file mode 100644 (file)
index 0000000..05681b1
--- /dev/null
@@ -0,0 +1,186 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH          0x1fc00000      /* Flash */
+
+#define KSEG0                  0x80000000
+#define KSEG1                  0xa0000000
+
+#define KSEG1ADDR(a)           ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I     0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)  \
+       __asm__ __volatile__(           \
+               ".set noreorder;\n"             \
+               ".set mips3;\n"                 \
+               "cache %1, (%0);\n"             \
+               ".set mips0;\n"                 \
+               ".set reorder\n"                \
+               :                                               \
+               : "r" (base),                   \
+                 "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+       unsigned long start = KSEG0;
+       unsigned long end = (start + size);
+
+       while(start < end) {
+               cache_unroll(start,Index_Invalidate_I);
+               start += lsize;
+       }
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+       unsigned long start = KSEG0;
+       unsigned long end = (start + size);
+
+       while(start < end) {
+               cache_unroll(start,Index_Writeback_Inv_D);
+               start += lsize;
+       }
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+
+struct trx_header {
+       unsigned int magic;             /* "HDR0" */
+       unsigned int len;               /* Length of file including header */
+       unsigned int crc32;             /* 32-bit CRC from flag_version to end of file */
+       unsigned int flag_version;      /* 0:15 flags, 16:31 version */
+       unsigned int offsets[3];        /* Offsets of partitions from start of header */
+};
+
+#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /*  "PS16"  */
+#define EDIMAX_PS_HEADER_LEN   0xc /* 12 bytes long for edimax header */
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+       static unsigned int val;
+
+       if (((unsigned int)offset % 4) == 0) {
+               val = *(unsigned int *)data;
+               data += 4;
+       }
+       
+       *bufferSize = 1;
+       *buffer = ((unsigned char *)&val) + (offset++ & 3);
+       
+       return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+       unsigned char *buffer;
+       UInt32 fake;
+       
+       return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize, 
+       unsigned long dcache_size, unsigned long dcache_lsize,
+       unsigned long fw_arg0, unsigned long fw_arg1,
+       unsigned long fw_arg2, unsigned long fw_arg3)
+{
+       unsigned int i;  /* temp value */
+       unsigned int lc; /* literal context bits */
+       unsigned int lp; /* literal pos state bits */
+       unsigned int pb; /* pos state bits */
+       unsigned int osize; /* uncompressed size */
+
+       ILzmaInCallback callback;
+       callback.Read = read_byte;
+
+       /* look for trx header, 32-bit data access */
+       for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+               ((struct trx_header *)data)->magic != TRX_MAGIC &&
+               ((struct trx_header *)data)->magic != EDIMAX_PS_HEADER_MAGIC;
+                data += 65536);
+
+       if (((struct trx_header *)data)->magic == EDIMAX_PS_HEADER_MAGIC)
+               data += EDIMAX_PS_HEADER_LEN;
+       /* compressed kernel is in the partition 0 or 1 */
+       if (((struct trx_header *)data)->offsets[1] > 65536) 
+               data += ((struct trx_header *)data)->offsets[0];
+       else
+               data += ((struct trx_header *)data)->offsets[1];
+
+       offset = 0;
+
+       /* lzma args */
+       i = get_byte();
+       lc = i % 9, i = i / 9;
+       lp = i % 5, pb = i / 5;
+
+       /* skip rest of the LZMA coder property */
+       for (i = 0; i < 4; i++)
+               get_byte();
+
+       /* read the lower half of uncompressed size in the header */
+       osize = ((unsigned int)get_byte()) +
+               ((unsigned int)get_byte() << 8) +
+               ((unsigned int)get_byte() << 16) +
+               ((unsigned int)get_byte() << 24);
+
+       /* skip rest of the header (upper half of uncompressed size) */
+       for (i = 0; i < 4; i++) 
+               get_byte();
+
+       /* decompress kernel */
+       if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+               (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+       {
+               blast_dcache(dcache_size, dcache_lsize);
+               blast_icache(icache_size, icache_lsize);
+
+               /* Jump to load address */
+               ((void (*)(unsigned long, unsigned long, unsigned long,
+                       unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2,
+                               fw_arg3);
+       }
+}
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/decompress.lds.in b/target/linux/bcm47xx/image/lzma-loader/src/decompress.lds.in
new file mode 100644 (file)
index 0000000..33f56f8
--- /dev/null
@@ -0,0 +1,20 @@
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+       . = BZ_TEXT_START;
+       .text : {
+               *(.text.entry)
+               *(.text)
+               *(.rodata)
+       }
+
+       .data : {
+               *(.data)
+       }
+
+       .bss : {
+               *(.bss)
+       }
+
+       workspace = .;
+}
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/head.S b/target/linux/bcm47xx/image/lzma-loader/src/head.S
new file mode 100644 (file)
index 0000000..50c159c
--- /dev/null
@@ -0,0 +1,161 @@
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)    */
+/* cache manipulation adapted from Broadcom code       */
+/* idea taken from original bunzip2 decompressor code  */
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0          0x80000000
+
+#define C0_CONFIG      $16
+#define C0_TAGLO       $28
+#define C0_TAGHI       $29
+
+#define        CONF1_DA_SHIFT  7                       /* D$ associativity */
+#define CONF1_DA_MASK  0x00000380
+#define CONF1_DA_BASE  1
+#define CONF1_DL_SHIFT 10                      /* D$ line size */
+#define CONF1_DL_MASK  0x00001c00
+#define CONF1_DL_BASE  2
+#define CONF1_DS_SHIFT 13                      /* D$ sets/way */
+#define CONF1_DS_MASK  0x0000e000
+#define CONF1_DS_BASE  64
+#define CONF1_IA_SHIFT 16                      /* I$ associativity */
+#define CONF1_IA_MASK  0x00070000
+#define CONF1_IA_BASE  1
+#define CONF1_IL_SHIFT 19                      /* I$ line size */
+#define CONF1_IL_MASK  0x00380000
+#define CONF1_IL_BASE  2
+#define CONF1_IS_SHIFT 22                      /* Instruction cache sets/way */
+#define CONF1_IS_MASK  0x01c00000
+#define CONF1_IS_BASE  64
+
+#define Index_Invalidate_I     0x00
+#define Index_Writeback_Inv_D   0x01
+
+       .text
+       LEAF(startup)
+       .set noreorder
+       li      sp, BZ_STACK_START
+       addi    sp, -48
+       sw      a0, 16(sp)
+       sw      a1, 20(sp)
+       sw      a2, 24(sp)
+       sw      a3, 28(sp)
+
+       /* Copy decompressor code to the right place */
+       li      t2, BZ_TEXT_START
+       add     a0, t2, 0
+       la      a1, code_start
+       la      a2, code_stop
+$L1:
+       lw      t0, 0(a1)
+       sw      t0, 0(a0)
+       add     a1, 4
+       add     a0, 4
+       blt     a1, a2, $L1
+       nop
+
+       /* At this point we need to invalidate dcache and */
+       /* icache before jumping to new code */
+
+1:     /* Get cache sizes */
+       .set    mips32
+       mfc0    s0,C0_CONFIG,1
+       .set    mips0
+
+       li      s1,CONF1_DL_MASK
+       and     s1,s0
+       beq     s1,zero,nodc
+       nop
+
+       srl     s1,CONF1_DL_SHIFT
+       li      t0,CONF1_DL_BASE
+       sll     s1,t0,s1                /* s1 has D$ cache line size */
+
+       li      s2,CONF1_DA_MASK
+       and     s2,s0
+       srl     s2,CONF1_DA_SHIFT
+       addiu   s2,CONF1_DA_BASE        /* s2 now has D$ associativity */
+
+       li      t0,CONF1_DS_MASK
+       and     t0,s0
+       srl     t0,CONF1_DS_SHIFT
+       li      s3,CONF1_DS_BASE
+       sll     s3,s3,t0                /* s3 has D$ sets per way */
+
+       multu   s2,s3                   /* sets/way * associativity */
+       mflo    t0                      /* total cache lines */
+
+       multu   s1,t0                   /* D$ linesize * lines */
+       mflo    s2                      /* s2 is now D$ size in bytes */
+
+       /* Initilize the D$: */
+       mtc0    zero,C0_TAGLO
+       mtc0    zero,C0_TAGHI
+
+       li      t0,KSEG0                /* Just an address for the first $ line */
+       addu    t1,t0,s2                /*  + size of cache == end */
+
+       .set    mips3
+1:     cache   Index_Writeback_Inv_D,0(t0)
+       .set    mips0
+       bne     t0,t1,1b
+       addu    t0,s1
+
+nodc:
+       /* Now we get to do it all again for the I$ */
+
+       move    s3,zero                 /* just in case there is no icache */
+       move    s4,zero
+
+       li      t0,CONF1_IL_MASK
+       and     t0,s0
+       beq     t0,zero,noic
+       nop
+
+       srl     t0,CONF1_IL_SHIFT
+       li      s3,CONF1_IL_BASE
+       sll     s3,t0                   /* s3 has I$ cache line size */
+
+       li      t0,CONF1_IA_MASK
+       and     t0,s0
+       srl     t0,CONF1_IA_SHIFT
+       addiu   s4,t0,CONF1_IA_BASE     /* s4 now has I$ associativity */
+
+       li      t0,CONF1_IS_MASK
+       and     t0,s0
+       srl     t0,CONF1_IS_SHIFT
+       li      s5,CONF1_IS_BASE
+       sll     s5,t0                   /* s5 has I$ sets per way */
+
+       multu   s4,s5                   /* sets/way * associativity */
+       mflo    t0                      /* s4 is now total cache lines */
+
+       multu   s3,t0                   /* I$ linesize * lines */
+       mflo    s4                      /* s4 is cache size in bytes */
+
+       /* Initilize the I$: */
+       mtc0    zero,C0_TAGLO
+       mtc0    zero,C0_TAGHI
+
+       li      t0,KSEG0                /* Just an address for the first $ line */
+       addu    t1,t0,s4                /*  + size of cache == end */
+
+       .set    mips3
+1:     cache   Index_Invalidate_I,0(t0)
+       .set    mips0
+       bne     t0,t1,1b
+       addu    t0,s3
+
+noic:
+       move    a0,s4                   /* icache size */
+       move    a1,s3                   /* icache line size */
+       move    a2,s2                   /* dcache size */
+       jal     t2
+       move    a3,s1                   /* dcache line size */
+
+       .set reorder
+       END(startup)
diff --git a/target/linux/bcm47xx/image/lzma-loader/src/loader.lds.in b/target/linux/bcm47xx/image/lzma-loader/src/loader.lds.in
new file mode 100644 (file)
index 0000000..20f2ea9
--- /dev/null
@@ -0,0 +1,17 @@
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+       . = TEXT_START;
+       .text : {
+               *(.text)
+               *(.rodata)
+       }
+
+       .data : {
+               *(.data)
+       }
+
+       .bss : {
+               *(.bss)
+       }
+}
diff --git a/target/linux/bcm47xx/legacy/config-default b/target/linux/bcm47xx/legacy/config-default
new file mode 100644 (file)
index 0000000..8a52e47
--- /dev/null
@@ -0,0 +1,8 @@
+CONFIG_B44=y
+CONFIG_B44_PCI=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI_AUTOSELECT=y
+# CONFIG_BCM47XX_BCMA is not set
+# CONFIG_BCMA is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_SSB_DRIVER_GIGE is not set
diff --git a/target/linux/bcm47xx/legacy/profiles/100-Broadcom-b43.mk b/target/linux/bcm47xx/legacy/profiles/100-Broadcom-b43.mk
new file mode 100644 (file)
index 0000000..50d7770
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2007-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-b43
+  NAME:=Broadcom SoC, all Ethernet, BCM43xx WiFi (b43, default)
+  PACKAGES:=kmod-b43 kmod-b43legacy
+endef
+
+define Profile/Broadcom-b43/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the mac80211, b43 and
+       b43legacy drivers and b44, tg3 or bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-b43))
+
diff --git a/target/linux/bcm47xx/legacy/profiles/101-Broadcom-wl.mk b/target/linux/bcm47xx/legacy/profiles/101-Broadcom-wl.mk
new file mode 100644 (file)
index 0000000..6a4c5b0
--- /dev/null
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-wl
+  NAME:=Broadcom SoC, all Ethernet, BCM43xx WiFi (wl, proprietary)
+  PACKAGES:=-wpad-mini kmod-brcm-wl-mini wlc nas
+endef
+
+define Profile/Broadcom-wl/Description
+       Package set compatible with hardware any Broadcom BCM47xx or BCM535x
+       SoC with Broadcom BCM43xx Wifi cards using the proprietary Broadcom
+       wireless "wl" driver and b44, tg3 or bgmac Ethernet driver.
+endef
+
+$(eval $(call Profile,Broadcom-wl))
+
diff --git a/target/linux/bcm47xx/legacy/target.mk b/target/linux/bcm47xx/legacy/target.mk
new file mode 100644 (file)
index 0000000..fca6128
--- /dev/null
@@ -0,0 +1,10 @@
+FEATURES += low_mem pcmcia small_flash
+BOARDNAME:=Legacy (BMIPS3300)
+
+DEFAULT_PACKAGES += wpad-mini
+
+define Target/Description
+       Build firmware for Broadcom BCM47xx and BCM53xx devices with
+       BMIPS3300 CPU except for BCM4705 SoC.
+       Supported SoCs: BCM5352E, BCM5354, BCM5365?, BCM4712, BCM4704.
+endef
diff --git a/target/linux/bcm47xx/mips74k/config-default b/target/linux/bcm47xx/mips74k/config-default
new file mode 100644 (file)
index 0000000..2c3c403
--- /dev/null
@@ -0,0 +1,20 @@
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_BCM47XX_SSB is not set
+CONFIG_BGMAC=y
+CONFIG_BGMAC_BCMA=y
+CONFIG_BOUNCE=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPSR1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_GPIO_WDT is not set
+CONFIG_HIGHMEM=y
+# CONFIG_SSB is not set
+# CONFIG_SSB_DRIVER_EXTIF is not set
+# CONFIG_SSB_DRIVER_GIGE is not set
+# CONFIG_SSB_DRIVER_MIPS is not set
+# CONFIG_SSB_EMBEDDED is not set
+# CONFIG_SSB_PCICORE_HOSTMODE is not set
+# CONFIG_SSB_SERIAL is not set
+# CONFIG_SSB_SFLASH is not set
diff --git a/target/linux/bcm47xx/mips74k/profiles/100-Broadcom-b43.mk b/target/linux/bcm47xx/mips74k/profiles/100-Broadcom-b43.mk
new file mode 100644 (file)
index 0000000..bd3b010
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-mips74k-b43
+  NAME:=Broadcom SoC, BCM43xx WiFi (b43)
+  PACKAGES:=kmod-b43
+endef
+
+define Profile/Broadcom-mips74k-b43/Description
+       Package set for devices with BCM43xx WiFi including mac80211 and b43
+       driver.
+endef
+
+$(eval $(call Profile,Broadcom-mips74k-b43))
+
diff --git a/target/linux/bcm47xx/mips74k/profiles/101-Broadcom-brcsmac.mk b/target/linux/bcm47xx/mips74k/profiles/101-Broadcom-brcsmac.mk
new file mode 100644 (file)
index 0000000..a138ef9
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-mips74k-brcmsmac
+  NAME:=Broadcom SoC, BCM43xx WiFi (brcmsmac)
+  PACKAGES:=kmod-brcmsmac
+endef
+
+define Profile/Broadcom-mips74k-brcmsmac/Description
+       Package set for devices with BCM43xx WiFi including mac80211 and
+       brcmsmac driver.
+endef
+
+$(eval $(call Profile,Broadcom-mips74k-brcmsmac))
+
diff --git a/target/linux/bcm47xx/mips74k/profiles/102-Broadcom-wl.mk b/target/linux/bcm47xx/mips74k/profiles/102-Broadcom-wl.mk
new file mode 100644 (file)
index 0000000..66b13bf
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-mips74k-wl
+  NAME:=Broadcom SoC, BCM43xx WiFi (proprietary wl)
+  PACKAGES:=-wpad-basic kmod-brcm-wl wlc nas
+endef
+
+define Profile/Broadcom-mips74k-wl/Description
+       Package set for devices with BCM43xx WiFi including proprietary (and
+       closed source) driver "wl".
+endef
+
+$(eval $(call Profile,Broadcom-mips74k-wl))
+
diff --git a/target/linux/bcm47xx/mips74k/profiles/103-Broadcom-none.mk b/target/linux/bcm47xx/mips74k/profiles/103-Broadcom-none.mk
new file mode 100644 (file)
index 0000000..cc4668d
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Broadcom-mips74k-none
+  NAME:=Broadcom SoC, No WiFi
+  PACKAGES:=-wpad-basic
+endef
+
+define Profile/Broadcom-mips74k-none/Description
+       Package set for devices without a WiFi.
+endef
+
+$(eval $(call Profile,Broadcom-mips74k-none))
+
diff --git a/target/linux/bcm47xx/mips74k/target.mk b/target/linux/bcm47xx/mips74k/target.mk
new file mode 100644 (file)
index 0000000..1e2e843
--- /dev/null
@@ -0,0 +1,9 @@
+BOARDNAME:=MIPS 74K
+CPU_TYPE:=74kc
+
+DEFAULT_PACKAGES += wpad-basic
+
+define Target/Description
+       Build firmware for Broadcom BCM47xx and BCM53xx devices with
+       MIPS 74K CPU.
+endef
diff --git a/target/linux/bcm47xx/modules.mk b/target/linux/bcm47xx/modules.mk
new file mode 100644 (file)
index 0000000..cd46901
--- /dev/null
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/bgmac
+  TITLE:=Broadcom bgmac driver
+  KCONFIG:=CONFIG_BGMAC CONFIG_BGMAC_BCMA
+  DEPENDS:=@TARGET_bcm47xx @!TARGET_bcm47xx_legacy
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  FILES:= \
+       $(LINUX_DIR)/drivers/net/ethernet/broadcom/bgmac-bcma.ko \
+       $(LINUX_DIR)/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.ko \
+       $(LINUX_DIR)/drivers/net/ethernet/broadcom/bgmac.ko
+  AUTOLOAD:=$(call AutoProbe,bgmac-bcma)
+endef
+
+define KernelPackage/bgmac/description
+ Kernel modules for Broadcom bgmac Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,bgmac))
diff --git a/target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch b/target/linux/bcm47xx/patches-4.14/031-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch
new file mode 100644 (file)
index 0000000..e8b426f
--- /dev/null
@@ -0,0 +1,86 @@
+From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dan.haab@luxul.com>
+Date: Tue, 27 Mar 2018 11:24:34 -0600
+Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
+
+Some Luxul devices use PCIe connected GPIO LEDs that are not available
+until the PCI subsytem and its drivers load. Using the same array for
+these LEDs would block registering any LEDs until all GPIOs become
+available. This may be undesired behavior as some LEDs should be
+available as early as possible (e.g. system status LED). This patch will
+allow registering available LEDs while deferring these PCIe GPIO
+connected 'extra' LEDs until they become available.
+
+Signed-off-by: Dan Haab <dan.haab@luxul.com>
+Cc: Ralf Baechle <ralf@linux-mips.org>
+Cc: Hauke Mehrtens <hauke@hauke-m.de>
+Cc: linux-mips@linux-mips.org
+Patchwork: https://patchwork.linux-mips.org/patch/18952/
+Signed-off-by: James Hogan <jhogan@kernel.org>
+---
+ arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/arch/mips/bcm47xx/leds.c
++++ b/arch/mips/bcm47xx/leds.c
+@@ -409,6 +409,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc
+ };
+ static const struct gpio_led
++bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
++      BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
++      BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
++};
++
++static const struct gpio_led
+ bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
+       BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+       BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
+@@ -435,6 +441,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc
+       BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+ };
++static const struct gpio_led
++bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
++      BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
++};
++
+ /* Microsoft */
+ static const struct gpio_led
+@@ -528,6 +539,12 @@ static struct gpio_led_platform_data bcm
+       bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);             \
+ } while (0)
++static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
++#define bcm47xx_set_pdata_extra(dev_leds) do {                                \
++      bcm47xx_leds_pdata_extra.leds = dev_leds;                       \
++      bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds);       \
++} while (0)
++
+ void __init bcm47xx_leds_register(void)
+ {
+       enum bcm47xx_board board = bcm47xx_board_get();
+@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
+               break;
+       case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
+               bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
++              bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
+               break;
+       case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
+               bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
+@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
+               break;
+       case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
+               bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
++              bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
+               break;
+       case BCM47XX_BOARD_MICROSOFT_MN700:
+@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
+       }
+       gpio_led_register_device(-1, &bcm47xx_leds_pdata);
++      if (bcm47xx_leds_pdata_extra.num_leds)
++              gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
+ }
diff --git a/target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch b/target/linux/bcm47xx/patches-4.14/032-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch
new file mode 100644 (file)
index 0000000..2f85e86
--- /dev/null
@@ -0,0 +1,96 @@
+From 88b882ba0b0b7439d16d2c9df7f111cdf793443b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 8 Apr 2018 22:39:15 +0200
+Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR1000 V3
+
+This adds support for detecting this model board and registers some LEDs
+and buttons.
+
+There are two uncommon things regarding this device:
+1) It can use two different "board_id" ID values.
+   Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
+   in firmware file header. There are two reports (one from an OpenWrt
+   user) of a different "U12H139T50_NETGEAR" magic though.
+2) Power LEDs share GPIOs with buttons.
+   Amber one seems to share GPIO 2 with WPS button and green one seems
+   to share GPIO 3 with reset button. It remains unknown how to support
+   them and handle buttons at the same time. For that reason they aren't
+   added to the list of supported LEDs.
+---
+ arch/mips/bcm47xx/board.c                          | 2 ++
+ arch/mips/bcm47xx/buttons.c                        | 9 +++++++++
+ arch/mips/bcm47xx/leds.c                           | 9 +++++++++
+ arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
+ 4 files changed, 21 insertions(+)
+
+--- a/arch/mips/bcm47xx/board.c
++++ b/arch/mips/bcm47xx/board.c
+@@ -172,6 +172,8 @@ struct bcm47xx_board_type_list1 bcm47xx_
+       {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
++      {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
++      {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
+--- a/arch/mips/bcm47xx/buttons.c
++++ b/arch/mips/bcm47xx/buttons.c
+@@ -412,6 +412,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
+ };
+ static const struct gpio_keys_button
++bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = {
++      BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON),
++      BCM47XX_GPIO_KEY(3, KEY_RESTART),
++};
++
++static const struct gpio_keys_button
+ bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
+       BCM47XX_GPIO_KEY(4, KEY_RESTART),
+       BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+@@ -670,6 +676,9 @@ int __init bcm47xx_buttons_register(void
+       case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
+               break;
++      case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3);
++              break;
+       case BCM47XX_BOARD_NETGEAR_WNR3500L:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
+               break;
+--- a/arch/mips/bcm47xx/leds.c
++++ b/arch/mips/bcm47xx/leds.c
+@@ -498,6 +498,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
+ };
+ static const struct gpio_led
++bcm47xx_leds_netgear_wnr1000_v3[] __initconst = {
++      BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
++      BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
++};
++
++static const struct gpio_led
+ bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
+       BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+       BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+@@ -758,6 +764,9 @@ void __init bcm47xx_leds_register(void)
+       case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+               bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
+               break;
++      case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
++              bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3);
++              break;
+       case BCM47XX_BOARD_NETGEAR_WNR3500L:
+               bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
+               break;
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+@@ -110,6 +110,7 @@ enum bcm47xx_board {
+       BCM47XX_BOARD_NETGEAR_WNDR4000,
+       BCM47XX_BOARD_NETGEAR_WNDR4500V1,
+       BCM47XX_BOARD_NETGEAR_WNDR4500V2,
++      BCM47XX_BOARD_NETGEAR_WNR1000_V3,
+       BCM47XX_BOARD_NETGEAR_WNR2000,
+       BCM47XX_BOARD_NETGEAR_WNR3500L,
+       BCM47XX_BOARD_NETGEAR_WNR3500U,
diff --git a/target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch b/target/linux/bcm47xx/patches-4.14/033-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch
new file mode 100644 (file)
index 0000000..7c860bb
--- /dev/null
@@ -0,0 +1,24 @@
+From 663beaeacf2552ed07405e69e96a18775e069eab Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 8 Apr 2018 22:51:08 +0200
+Subject: [PATCH] firmware: bcm47xx_nvram: support small (0x6000 B) NVRAM
+ partitions
+
+Some old devices with 4 MiB flashes were using 0x1000 block size and
+could use smaller (0x6000 bytes) flash partition for storing NVRAM
+content. This adds support for reading NVRAM on Netgear WNR1000 V3.
+---
+ drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
+@@ -36,7 +36,7 @@ struct nvram_header {
+ static char nvram_buf[NVRAM_SPACE];
+ static size_t nvram_len;
+-static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
++static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+ static u32 find_nvram_size(void __iomem *end)
+ {
diff --git a/target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch b/target/linux/bcm47xx/patches-4.14/035-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
new file mode 100644 (file)
index 0000000..34a79f9
--- /dev/null
@@ -0,0 +1,34 @@
+From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
+Date: Mon, 11 Mar 2019 22:08:22 +0100
+Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Eric has reported on OpenWrt's bug tracking system[1], that he's not
+able to use USB devices on his WNDR3400v2 device after the boot, until
+he turns on GPIO #21 manually through sysfs.
+
+1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
+
+Cc: Rafał Miłecki <zajec5@gmail.com>
+Cc: Hauke Mehrtens <hauke@hauke-m.de>
+Reported-by: Eric Bohlman <ericbohlman@gmail.com>
+Tested-by: Eric Bohlman <ericbohlman@gmail.com>
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+Signed-off-by: Paul Burton <paul.burton@mips.com>
+---
+ arch/mips/bcm47xx/workarounds.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm47xx/workarounds.c
++++ b/arch/mips/bcm47xx/workarounds.c
+@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
+       case BCM47XX_BOARD_NETGEAR_WNR3500L:
+               bcm47xx_workarounds_enable_usb_power(12);
+               break;
++      case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
+       case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+               bcm47xx_workarounds_enable_usb_power(21);
+               break;
diff --git a/target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch b/target/linux/bcm47xx/patches-4.14/159-cpu_fixes.patch
new file mode 100644 (file)
index 0000000..e015610
--- /dev/null
@@ -0,0 +1,510 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -26,6 +26,38 @@
+ extern void (*r4k_blast_dcache)(void);
+ extern void (*r4k_blast_icache)(void);
++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++      return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++      unsigned long x;
++      get_dbe(x, (unsigned long *)addr);;
++}
++
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+  * This macro return a properly sign-extended address suitable as base address
+  * for indexed cache operations.  Two issues here:
+@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Index_Writeback_Inv_D, addr);
+       __dflush_epilogue
+ }
+@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Hit_Writeback_Inv_D, addr);
+       __dflush_epilogue
+ }
+@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Hit_Invalidate_D, addr);
+       __dflush_epilogue
+ }
+@@ -206,6 +241,7 @@ static inline int protected_flush_icache
+ #ifdef CONFIG_EVA
+               return protected_cachee_op(Hit_Invalidate_I, addr);
+ #else
++              BCM4710_DUMMY_RREG();
+               return protected_cache_op(Hit_Invalidate_I, addr);
+ #endif
+       }
+@@ -219,6 +255,7 @@ static inline int protected_flush_icache
+  */
+ static inline int protected_writeback_dcache_line(unsigned long addr)
+ {
++      BCM4710_DUMMY_RREG();
+ #ifdef CONFIG_EVA
+       return protected_cachee_op(Hit_Writeback_Inv_D, addr);
+ #else
+@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
+               : "r" (base),                                           \
+                 "i" (op));
++static inline void blast_dcache(void)
++{
++      unsigned long start = KSEG0;
++      unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++      unsigned long end = (start + dcache_size);
++
++      do {
++              BCM4710_DUMMY_RREG();
++              cache_op(Index_Writeback_Inv_D, start);
++              start += current_cpu_data.dcache.linesz;
++      } while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++      unsigned long start = page;
++      unsigned long end = start + PAGE_SIZE;
++
++      BCM4710_FILL_TLB(start);
++      do {
++              BCM4710_DUMMY_RREG();
++              cache_op(Hit_Writeback_Inv_D, start);
++              start += current_cpu_data.dcache.linesz;
++      } while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++      unsigned long start = page;
++      unsigned long end = start + PAGE_SIZE;
++      unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++      unsigned long ws_end = current_cpu_data.dcache.ways <<
++                             current_cpu_data.dcache.waybit;
++      unsigned long ws, addr;
++      for (ws = 0; ws < ws_end; ws += ws_inc) {
++              start = page + ws;
++              for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++                      BCM4710_DUMMY_RREG();
++                      cache_op(Index_Writeback_Inv_D, addr);
++              }
++      }
++}
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)  \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
+ static inline void extra##blast_##pfx##cache##lsize(void)             \
+ {                                                                     \
+       unsigned long start = INDEX_BASE;                               \
+@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
++      war                                                             \
+       for (ws = 0; ws < ws_end; ws += ws_inc)                         \
+               for (addr = start; addr < end; addr += lsize * 32)      \
+                       cache##lsize##_unroll32(addr|ws, indexop);      \
+@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
++      war                                                             \
+       do {                                                            \
+               cache##lsize##_unroll32(start, hitop);                  \
+               start += lsize * 32;                                    \
+@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
+                              current_cpu_data.desc.waybit;            \
+       unsigned long ws, addr;                                         \
+                                                                       \
++      war                                                             \
++                                                                      \
+       __##pfx##flush_prologue                                         \
+                                                                       \
+       for (ws = 0; ws < ws_end; ws += ws_inc)                         \
+@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
+       __##pfx##flush_epilogue                                         \
+ }
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
+ #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
+ static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
+@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
+ __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)      \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)   \
+ static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
+                                                   unsigned long end)  \
+ {                                                                     \
+       unsigned long lsize = cpu_##desc##_line_size();                 \
+-      unsigned long lsize_2 = lsize * 2;                              \
+-      unsigned long lsize_3 = lsize * 3;                              \
+-      unsigned long lsize_4 = lsize * 4;                              \
+-      unsigned long lsize_5 = lsize * 5;                              \
+-      unsigned long lsize_6 = lsize * 6;                              \
+-      unsigned long lsize_7 = lsize * 7;                              \
+-      unsigned long lsize_8 = lsize * 8;                              \
+       unsigned long addr = start & ~(lsize - 1);                      \
+-      unsigned long aend = (end + lsize - 1) & ~(lsize - 1);          \
+-      int lines = (aend - addr) / lsize;                              \
++      unsigned long aend = (end - 1) & ~(lsize - 1);                  \
++      war                                                             \
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
+-      while (lines >= 8) {                                            \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              prot##cache_op(hitop, addr + lsize_2);                  \
+-              prot##cache_op(hitop, addr + lsize_3);                  \
+-              prot##cache_op(hitop, addr + lsize_4);                  \
+-              prot##cache_op(hitop, addr + lsize_5);                  \
+-              prot##cache_op(hitop, addr + lsize_6);                  \
+-              prot##cache_op(hitop, addr + lsize_7);                  \
+-              addr += lsize_8;                                        \
+-              lines -= 8;                                             \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x4) {                                              \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              prot##cache_op(hitop, addr + lsize_2);                  \
+-              prot##cache_op(hitop, addr + lsize_3);                  \
+-              addr += lsize_4;                                        \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x2) {                                              \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              addr += lsize_2;                                        \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x1) {                                              \
++      while (1) {                                                     \
++              war2                                                    \
+               prot##cache_op(hitop, addr);                            \
++              if (addr == aend)                                       \
++                      break;                                          \
++              addr += lsize;                                          \
+       }                                                               \
+                                                                       \
+       __##pfx##flush_epilogue                                         \
+@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
+ #ifndef CONFIG_EVA
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
+ #else
+@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
+ __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
+ #endif
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
+ __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
+-      protected_, loongson2_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
++      protected_, loongson2_, , )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
+ /* Currently, this is very specific to Loongson-3 */
+ #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)    \
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -428,6 +428,10 @@
+               eretnc
+ #else
+               .set    arch=r4000
++#ifdef CONFIG_BCM47XX
++              nop
++              nop
++#endif
+               eret
+               .set    mips0
+ #endif
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -21,6 +21,19 @@
+ #include <asm/war.h>
+ #include <asm/thread_info.h>
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++#  undef eret
++# endif
++# define eret                                         \
++      .set push;                              \
++      .set noreorder;                         \
++       nop;                                   \
++       nop;                                   \
++       eret;                                  \
++      .set pop;
++#endif
++
+       __INIT
+ /*
+@@ -32,6 +45,9 @@
+ NESTED(except_vec3_generic, 0, sp)
+       .set    push
+       .set    noat
++#ifdef CONFIG_BCM47XX
++      nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+       mfc0    k0, CP0_INDEX
+ #endif
+@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
+       .set    push
+       .set    arch=r4000
+       .set    noat
++#ifdef CONFIG_BCM47XX
++      nop
++#endif
+       mfc0    k1, CP0_CAUSE
+       li      k0, 31<<2
+       andi    k1, k1, 0x7c
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -39,6 +39,9 @@
+ #include <asm/dma-coherence.h>
+ #include <asm/mips-cps.h>
++/* For enabling BCM4710 cache workarounds */
++static int bcm4710 = 0;
++
+ /*
+  * Bits describing what cache ops an SMP callback function may perform.
+  *
+@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
+ {
+       unsigned long  dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache_page = blast_dcache_page;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache_user_page = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
+ {
+       unsigned long dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache_page_indexed = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
+ {
+       unsigned long dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache = blast_dcache;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
+       }
+       R4600_HIT_CACHEOP_WAR_IMPL;
++      BCM4710_PROTECTED_FILL_TLB(addr);
++      BCM4710_PROTECTED_FILL_TLB(addr + 4);
+       if (!cpu_has_ic_fills_f_dc) {
+               if (dc_lsize)
+                       vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
+@@ -1880,6 +1894,17 @@ static void coherency_setup(void)
+        * silly idea of putting something else there ...
+        */
+       switch (current_cpu_type()) {
++      case CPU_BMIPS3300:
++              {
++                      u32 cm;
++                      cm = read_c0_diag();
++                      /* Enable icache */
++                      cm |= (1 << 31);
++                      /* Enable dcache */
++                      cm |= (1 << 30);
++                      write_c0_diag(cm);
++              }
++              break;
+       case CPU_R4000PC:
+       case CPU_R4000SC:
+       case CPU_R4000MC:
+@@ -1926,6 +1951,15 @@ void r4k_cache_init(void)
+       extern void build_copy_page(void);
+       struct cpuinfo_mips *c = &current_cpu_data;
++      /* Check if special workarounds are required */
++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
++      if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++              printk("Enabling BCM4710A0 cache workarounds.\n");
++              bcm4710 = 1;
++      } else
++#endif
++              bcm4710 = 0;
++
+       probe_pcache();
+       probe_vcache();
+       setup_scache();
+@@ -2004,7 +2038,15 @@ void r4k_cache_init(void)
+        */
+       local_r4k___flush_cache_all(NULL);
++#ifdef CONFIG_BCM47XX
++      {
++              static void (*_coherency_setup)(void);
++              _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++              _coherency_setup();
++      }
++#else
+       coherency_setup();
++#endif
+       board_cache_error_setup = r4k_cache_error_setup;
+       /*
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -983,6 +983,9 @@ void build_get_pgde32(u32 **p, unsigned
+               uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+               uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++              uasm_i_nop(p);
++#endif
+               UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+               uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1344,6 +1347,9 @@ static void build_r4000_tlb_refill_handl
+ #ifdef CONFIG_64BIT
+               build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++              uasm_i_nop(&p);
++# endif
+               build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+@@ -1355,6 +1361,9 @@ static void build_r4000_tlb_refill_handl
+               build_update_entries(&p, K0, K1);
+               build_tlb_write_entry(&p, &l, &r, tlb_random);
+               uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++              uasm_i_nop(&p);
++#endif
+               uasm_i_eret(&p); /* return from trap */
+       }
+ #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+@@ -2064,6 +2073,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ #ifdef CONFIG_64BIT
+       build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++      uasm_i_nop(p);
++# endif
+       build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
+ #endif
+@@ -2110,6 +2122,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+       build_tlb_write_entry(p, l, r, tlb_indexed);
+       uasm_l_leave(l, *p);
+       build_restore_work_registers(p);
++#ifdef CONFIG_BCM47XX
++      uasm_i_nop(p);
++#endif
+       uasm_i_eret(p); /* return from trap */
+ #ifdef CONFIG_64BIT
diff --git a/target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch b/target/linux/bcm47xx/patches-4.14/160-kmap_coherent.patch
new file mode 100644 (file)
index 0000000..5cdb545
--- /dev/null
@@ -0,0 +1,78 @@
+From: Jeff Hansen <jhansen@cardaccess-inc.com>
+Subject: [PATCH] kmap_coherent
+
+On ASUS WL-500gP there are some "Data bus error"s when executing simple
+commands liks "ps" or "cat /proc/1/cmdline".
+
+This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
+---
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -187,6 +187,9 @@
+ #ifndef cpu_has_local_ebase
+ #define cpu_has_local_ebase   1
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+ /*
+  * I-Cache snoops remote store.        This only matters on SMP.  Some multiprocessors
+--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -80,4 +80,6 @@
+ #define cpu_scache_line_size()                0
+ #define cpu_has_vz                    0
++#define cpu_use_kmap_coherent         0
++
+ #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
+               map_coherent = (cpu_has_dc_aliases &&
+                               page_mapcount(page) &&
+                               !Page_dcache_dirty(page));
+-              if (map_coherent)
++              if (map_coherent && cpu_use_kmap_coherent)
+                       vaddr = kmap_coherent(page, addr);
+               else
+                       vaddr = kmap_atomic(page);
+@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
+       }
+       if (vaddr) {
+-              if (map_coherent)
++              if (map_coherent && cpu_use_kmap_coherent)
+                       kunmap_coherent();
+               else
+                       kunmap_atomic(vaddr);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -170,7 +170,7 @@ void copy_user_highpage(struct page *to,
+       void *vfrom, *vto;
+       vto = kmap_atomic(to);
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(from) && !Page_dcache_dirty(from)) {
+               vfrom = kmap_coherent(from, vaddr);
+               copy_page(vto, vfrom);
+@@ -192,7 +192,7 @@ void copy_to_user_page(struct vm_area_st
+       struct page *page, unsigned long vaddr, void *dst, const void *src,
+       unsigned long len)
+ {
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(page) && !Page_dcache_dirty(page)) {
+               void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+               memcpy(vto, src, len);
+@@ -210,7 +210,7 @@ void copy_from_user_page(struct vm_area_
+       struct page *page, unsigned long vaddr, void *dst, const void *src,
+       unsigned long len)
+ {
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(page) && !Page_dcache_dirty(page)) {
+               void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+               memcpy(dst, vfrom, len);
diff --git a/target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch b/target/linux/bcm47xx/patches-4.14/209-b44-register-adm-switch.patch
new file mode 100644 (file)
index 0000000..6e655ac
--- /dev/null
@@ -0,0 +1,121 @@
+From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 9 Nov 2013 17:03:59 +0100
+Subject: [PATCH 210/210] b44: register adm switch
+
+---
+ drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
+ drivers/net/ethernet/broadcom/b44.h |    3 ++
+ 2 files changed, 60 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -31,6 +31,8 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/slab.h>
+ #include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/platform_data/adm6996-gpio.h>
+ #include <linux/uaccess.h>
+ #include <asm/io.h>
+@@ -2248,6 +2250,69 @@ static void b44_adjust_link(struct net_d
+       }
+ }
++#ifdef CONFIG_BCM47XX
++static int b44_register_adm_switch(struct b44 *bp)
++{
++      int gpio;
++      struct platform_device *pdev;
++      struct adm6996_gpio_platform_data adm_data = {0};
++      struct platform_device_info info = {0};
++
++      adm_data.model = ADM6996L;
++      gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
++      if (gpio >= 0)
++              adm_data.eecs = gpio;
++      else
++              adm_data.eecs = 2;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
++      if (gpio >= 0)
++              adm_data.eesk = gpio;
++      else
++              adm_data.eesk = 3;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
++      if (gpio >= 0)
++              adm_data.eedi = gpio;
++      else
++              adm_data.eedi = 4;
++
++      /*
++       * We ignore the "adm_rc" GPIO here. The driver does not use it,
++       * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
++       */
++
++      info.parent = bp->sdev->dev;
++      info.name = "adm6996_gpio";
++      info.id = -1;
++      info.data = &adm_data;
++      info.size_data = sizeof(adm_data);
++
++      if (!bp->adm_switch) {
++              pdev = platform_device_register_full(&info);
++              if (IS_ERR(pdev))
++                      return PTR_ERR(pdev);
++
++              bp->adm_switch = pdev;
++      }
++      return 0;
++}
++static void b44_unregister_adm_switch(struct b44 *bp)
++{
++      if (bp->adm_switch)
++              platform_device_unregister(bp->adm_switch);
++}
++#else
++static int b44_register_adm_switch(struct b44 *bp)
++{
++      return 0;
++}
++static void b44_unregister_adm_switch(struct b44 *bp)
++{
++
++}
++#endif /* CONFIG_BCM47XX */
++
+ static int b44_register_phy_one(struct b44 *bp)
+ {
+       struct mii_bus *mii_bus;
+@@ -2283,6 +2348,9 @@ static int b44_register_phy_one(struct b
+       if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
+           (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
++              if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
++                      b44_register_adm_switch(bp);
++
+               dev_info(sdev->dev,
+                        "could not find PHY at %i, use fixed one\n",
+                        bp->phy_addr);
+@@ -2477,6 +2545,7 @@ static void b44_remove_one(struct ssb_de
+       unregister_netdev(dev);
+       if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+               b44_unregister_phy_one(bp);
++      b44_unregister_adm_switch(bp);
+       ssb_device_disable(sdev, 0);
+       ssb_bus_may_powerdown(sdev->bus);
+       netif_napi_del(&bp->napi);
+--- a/drivers/net/ethernet/broadcom/b44.h
++++ b/drivers/net/ethernet/broadcom/b44.h
+@@ -408,6 +408,9 @@ struct b44 {
+       struct mii_bus          *mii_bus;
+       int                     old_link;
+       struct mii_if_info      mii_if;
++
++      /* platform device for associated switch */
++      struct platform_device *adm_switch;
+ };
+ #endif /* _B44_H */
diff --git a/target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch b/target/linux/bcm47xx/patches-4.14/210-b44_phy_fix.patch
new file mode 100644 (file)
index 0000000..5620d5c
--- /dev/null
@@ -0,0 +1,54 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
+ error:
+       pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++      char buf[20];
++      struct ssb_device *sdev = bp->sdev;
++
++      /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++      if (sdev->bus->sprom.board_num == 100) {
++              bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
++      } else {
++              /* WL-HDD */
++              if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
++                  !strncmp(buf, "WL300-", strlen("WL300-"))) {
++                      if (sdev->bus->sprom.et0phyaddr == 0 &&
++                          sdev->bus->sprom.et1phyaddr == 1)
++                              bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
++              }
++      }
++      return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+ static int b44_setup_phy(struct b44 *bp)
+@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
+       int err;
+       b44_wap54g10_workaround(bp);
++      b44_bcm47xx_workarounds(bp);
+       if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+               return 0;
+@@ -2178,6 +2203,8 @@ static int b44_get_invariants(struct b44
+        * valid PHY address. */
+       bp->phy_addr &= 0x1F;
++      b44_bcm47xx_workarounds(bp);
++
+       memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
+       if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch b/target/linux/bcm47xx/patches-4.14/280-activate_ssb_support_in_usb.patch
new file mode 100644 (file)
index 0000000..0df8ec1
--- /dev/null
@@ -0,0 +1,25 @@
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig |    2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -31,6 +31,7 @@ config BCMA_HOST_PCI
+ config BCMA_HOST_SOC
+       bool "Support for BCMA in a SoC"
+       depends on BCMA
++      select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+       help
+         Host interface for a Broadcom AIX bus directly mapped into
+         the memory. This only works with the Broadcom SoCs from the
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -157,6 +157,7 @@ config SSB_SFLASH
+ config SSB_EMBEDDED
+       bool
+       depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
++      select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
+       default y
+ config SSB_DRIVER_EXTIF
diff --git a/target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch b/target/linux/bcm47xx/patches-4.14/300-fork_cacheflush.patch
new file mode 100644 (file)
index 0000000..b5efaaf
--- /dev/null
@@ -0,0 +1,21 @@
+From: Wolfram Joost <dbox2@frokaschwei.de>
+Subject: [PATCH] fork_cacheflush
+
+On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
+seem to be caused by a kernel. They can be avoided by:
+1) Disabling highpage
+2) Using flush_cache_mm in flush_cache_dup_mm
+
+For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
+---
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -47,7 +47,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm)        do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+       unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/bcm47xx/patches-4.14/310-no_highpage.patch b/target/linux/bcm47xx/patches-4.14/310-no_highpage.patch
new file mode 100644 (file)
index 0000000..646f352
--- /dev/null
@@ -0,0 +1,74 @@
+From: Jeff Hansen <jhansen@cardaccess-inc.com>
+Subject: [PATCH] no highpage
+
+On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
+seem to be caused by a kernel. They can be avoided by:
+1) Disabling highpage
+2) Using flush_cache_mm in flush_cache_dup_mm
+
+For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
+---
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
+ #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ extern void build_clear_page(void);
+ extern void build_copy_page(void);
+@@ -105,11 +106,16 @@ static inline void clear_user_page(void
+               flush_data_cache_page((unsigned long)addr);
+ }
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+-      unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++      struct page *to)
++{
++      extern void (*flush_data_cache_page)(unsigned long addr);
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++      copy_page(vto, vfrom);
++      if (!cpu_has_ic_fills_f_dc ||
++          pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++              flush_data_cache_page((unsigned long)vto);
++}
+ /*
+  * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -164,30 +164,6 @@ void kunmap_coherent(void)
+       preempt_enable();
+ }
+-void copy_user_highpage(struct page *to, struct page *from,
+-      unsigned long vaddr, struct vm_area_struct *vma)
+-{
+-      void *vfrom, *vto;
+-
+-      vto = kmap_atomic(to);
+-      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+-          page_mapcount(from) && !Page_dcache_dirty(from)) {
+-              vfrom = kmap_coherent(from, vaddr);
+-              copy_page(vto, vfrom);
+-              kunmap_coherent();
+-      } else {
+-              vfrom = kmap_atomic(from);
+-              copy_page(vto, vfrom);
+-              kunmap_atomic(vfrom);
+-      }
+-      if ((!cpu_has_ic_fills_f_dc) ||
+-          pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+-              flush_data_cache_page((unsigned long)vto);
+-      kunmap_atomic(vto);
+-      /* Make sure this page is cleared on other CPU's too before using it */
+-      smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+       struct page *page, unsigned long vaddr, void *dst, const void *src,
+       unsigned long len)
diff --git a/target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch b/target/linux/bcm47xx/patches-4.14/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch
new file mode 100644 (file)
index 0000000..74060e2
--- /dev/null
@@ -0,0 +1,185 @@
+--- a/arch/mips/bcm47xx/board.c
++++ b/arch/mips/bcm47xx/board.c
+@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
+       {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
+       {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
+       {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
++      {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
+       {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
+       {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
+       {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
+@@ -160,9 +161,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
+       {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
+       {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
+       {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
++      {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
++      {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
++      {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
+       {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
+--- a/arch/mips/bcm47xx/buttons.c
++++ b/arch/mips/bcm47xx/buttons.c
+@@ -27,6 +27,12 @@
+ /* Asus */
+ static const struct gpio_keys_button
++bcm47xx_buttons_asus_rtn10u[] __initconst = {
++      BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
++      BCM47XX_GPIO_KEY(21, KEY_RESTART),
++};
++
++static const struct gpio_keys_button
+ bcm47xx_buttons_asus_rtn12[] __initconst = {
+       BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+       BCM47XX_GPIO_KEY(1, KEY_RESTART),
+@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
+ };
+ static const struct gpio_keys_button
++bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
++      BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
++      BCM47XX_GPIO_KEY(6, KEY_RESTART),
++};
++
++static const struct gpio_keys_button
++bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
++      BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
++      BCM47XX_GPIO_KEY(8, KEY_RESTART),
++};
++
++static const struct gpio_keys_button
+ bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
+       BCM47XX_GPIO_KEY(5, KEY_WIMAX),
+       BCM47XX_GPIO_KEY(6, KEY_RESTART),
+@@ -385,6 +403,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
+ /* Netgear */
+ static const struct gpio_keys_button
++bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
++      BCM47XX_GPIO_KEY(6, KEY_RESTART),
++};
++
++static const struct gpio_keys_button
++bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
++      BCM47XX_GPIO_KEY(12, KEY_RESTART),
++      BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
++};
++
++static const struct gpio_keys_button
+ bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
+       BCM47XX_GPIO_KEY(4, KEY_RESTART),
+       BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+@@ -471,6 +500,9 @@ int __init bcm47xx_buttons_register(void
+       int err;
+       switch (board) {
++      case BCM47XX_BOARD_ASUS_RTN10U:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
++              break;
+       case BCM47XX_BOARD_ASUS_RTN12:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
+               break;
+@@ -601,6 +633,12 @@ int __init bcm47xx_buttons_register(void
+       case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
+               break;
++      case BCM47XX_BOARD_LINKSYS_WRT310NV2:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
++              break;
++      case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
++              break;
+       case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
+               break;
+@@ -664,6 +702,12 @@ int __init bcm47xx_buttons_register(void
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
+               break;
++      case BCM47XX_BOARD_NETGEAR_R6300_V1:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
++              break;
++      case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
++              err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
++              break;
+       case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+               err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
+               break;
+--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+@@ -72,6 +72,7 @@ enum bcm47xx_board {
+       BCM47XX_BOARD_LINKSYS_WRT300NV11,
+       BCM47XX_BOARD_LINKSYS_WRT310NV1,
+       BCM47XX_BOARD_LINKSYS_WRT310NV2,
++      BCM47XX_BOARD_LINKSYS_WRT320N_V1,
+       BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+       BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
+       BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
+@@ -98,9 +99,12 @@ enum bcm47xx_board {
+       BCM47XX_BOARD_MOTOROLA_WR850GP,
+       BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
++      BCM47XX_BOARD_NETGEAR_R6300_V1,
+       BCM47XX_BOARD_NETGEAR_WGR614V8,
+       BCM47XX_BOARD_NETGEAR_WGR614V9,
+       BCM47XX_BOARD_NETGEAR_WGR614_V10,
++      BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
++      BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
+       BCM47XX_BOARD_NETGEAR_WNDR3300,
+       BCM47XX_BOARD_NETGEAR_WNDR3400V1,
+       BCM47XX_BOARD_NETGEAR_WNDR3400V2,
+--- a/arch/mips/bcm47xx/leds.c
++++ b/arch/mips/bcm47xx/leds.c
+@@ -30,6 +30,14 @@
+ /* Asus */
+ static const struct gpio_led
++bcm47xx_leds_asus_rtn10u[] __initconst = {
++      BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
++      BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
++      BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
++      BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
++};
++
++static const struct gpio_led
+ bcm47xx_leds_asus_rtn12[] __initconst = {
+       BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+       BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
+ };
+ static const struct gpio_led
++bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
++      BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
++      BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
++      BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
++};
++
++static const struct gpio_led
+ bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
+       BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+       BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
+       enum bcm47xx_board board = bcm47xx_board_get();
+       switch (board) {
++      case BCM47XX_BOARD_ASUS_RTN10U:
++              bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
++              break;
+       case BCM47XX_BOARD_ASUS_RTN12:
+               bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
+               break;
+@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
+       case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+               bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
+               break;
++      case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
++              bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
++              break;
+       case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+               bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
+               break;
diff --git a/target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/bcm47xx/patches-4.14/400-mtd-bcm47xxpart-get-nvram.patch
new file mode 100644 (file)
index 0000000..df9d434
--- /dev/null
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_
+       int trx_num = 0; /* Number of found TRX partitions */
+       int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
+       int err;
++      bool found_nvram = false;
+       /*
+        * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
+@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_
+               if (buf[0] == NVRAM_HEADER) {
+                       bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+                                            master->size - blocksize, 0);
++                      found_nvram = true;
+                       break;
+               }
+       }
+       kfree(buf);
++      if (!found_nvram) {
++              pr_err("can not find a nvram partition reserve last block\n");
++              bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
++                                   master->size - blocksize * 2, MTD_WRITEABLE);
++              for (i = 0; i < curr_part; i++) {
++                      if (parts[i].size + parts[i].offset == master->size)
++                              parts[i].offset -= blocksize * 2;
++              }
++      }
++
+       /*
+        * Assume that partitions end at the beginning of the one they are
+        * followed by.
diff --git a/target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch b/target/linux/bcm47xx/patches-4.14/610-pci_ide_fix.patch
new file mode 100644 (file)
index 0000000..ccae6a5
--- /dev/null
@@ -0,0 +1,41 @@
+From: b.sander
+Subject: [PATCH] pci: IDE fix
+
+These are standard probing messages when using pdc202xx_old:
+pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
+PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
+PCI: Fixing up device 0000:00:01.0
+0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
+0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
+pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
+
+With the default MAX_HWIFS value after above we get:
+    ide2: BM-DMA at 0x0400-0x0407
+    ide3: BM-DMA at 0x0408-0x040f
+Probing IDE interface ide2...
+hde: CF500, CFA DISK drive
+
+As you can see it's ide2 + ide3 and hde.
+
+With this patch applied we get:
+    ide0: BM-DMA at 0x0400-0x0407
+    ide1: BM-DMA at 0x0408-0x040f
+Probing IDE interface ide0...
+hda: CF500, CFA DISK drive
+
+This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
+---
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -241,7 +241,11 @@ static inline void ide_std_init_ports(st
+       hw->io_ports.ctl_addr = ctl_addr;
+ }
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS    2
++#else
+ #define MAX_HWIFS     10
++#endif
+ /*
+  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch b/target/linux/bcm47xx/patches-4.14/791-tg3-no-pci-sleep.patch
new file mode 100644 (file)
index 0000000..85bac98
--- /dev/null
@@ -0,0 +1,17 @@
+When the Ethernet controller is powered down and someone wants to 
+access the mdio bus like the witch driver (b53) the system crashed if 
+PCI_D3hot was set before. This patch deactivates this power sawing mode 
+when a switch driver is in use.
+
+--- a/drivers/net/ethernet/broadcom/tg3.c
++++ b/drivers/net/ethernet/broadcom/tg3.c
+@@ -4264,7 +4264,8 @@ static int tg3_power_down_prepare(struct
+ static void tg3_power_down(struct tg3 *tp)
+ {
+       pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
+-      pci_set_power_state(tp->pdev, PCI_D3hot);
++      if (!tg3_flag(tp, ROBOSWITCH))
++              pci_set_power_state(tp->pdev, PCI_D3hot);
+ }
+ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
diff --git a/target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/bcm47xx/patches-4.14/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch
new file mode 100644 (file)
index 0000000..318dc55
--- /dev/null
@@ -0,0 +1,73 @@
+From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Thu, 20 Nov 2014 21:32:42 +0100
+Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -9,6 +9,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
++#include <bcm47xx_board.h>
+ static struct resource bcma_sflash_resource = {
+       .name   = "bcma_sflash",
+@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
+       { NULL },
+ };
++/* Some devices use smaller blocks (and have more of them) */
++static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
++      { "M25P16", 0x14, 0x1000, 512, },
++      { "M25P32", 0x15, 0x1000, 1024, },
++      { NULL },
++};
++
+ static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+       { "SST25WF512", 1, 0x1000, 16, },
+       { "SST25VF512", 0x48, 0x1000, 16, },
+@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
+       bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+ }
++const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
++{
++      enum bcm47xx_board board = bcm47xx_board_get();
++      const struct bcma_sflash_tbl_e *e;
++
++      switch (board) {
++      case BCM47XX_BOARD_NETGEAR_WGR614_V10:
++      case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
++              for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
++                      if (e->id == id)
++                              return e;
++              }
++              return NULL;
++      default:
++              return NULL;
++      }
++}
++
+ /* Initialize serial flash access */
+ int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
+               case 0x13:
+                       return -ENOTSUPP;
+               default:
++                      e = bcma_sflash_shrink_flash(id);
++                      if (e)
++                              break;
++
+                       for (e = bcma_sflash_st_tbl; e->name; e++) {
+                               if (e->id == id)
+                                       break;
diff --git a/target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch b/target/linux/bcm47xx/patches-4.14/820-wgt634u-nvram-fix.patch
new file mode 100644 (file)
index 0000000..aaab39a
--- /dev/null
@@ -0,0 +1,304 @@
+The Netgear wgt634u uses a different format for storing the 
+configuration. This patch is needed to read out the correct 
+configuration. The cfe_env.c file uses a different method way to read 
+out the configuration than the in kernel cfe config reader.
+
+--- a/drivers/firmware/broadcom/Makefile
++++ b/drivers/firmware/broadcom/Makefile
+@@ -1,2 +1,2 @@
+-obj-$(CONFIG_BCM47XX_NVRAM)           += bcm47xx_nvram.o
++obj-$(CONFIG_BCM47XX_NVRAM)           += bcm47xx_nvram.o cfe_env.o
+ obj-$(CONFIG_BCM47XX_SPROM)           += bcm47xx_sprom.o
+--- /dev/null
++++ b/drivers/firmware/broadcom/cfe_env.c
+@@ -0,0 +1,228 @@
++/*
++ * CFE environment variable access
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
++ * 
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <linux/uaccess.h>
++
++#define NVRAM_SIZE       (0x1ff0)
++static char _nvdata[NVRAM_SIZE];
++static char _valuestr[256];
++
++/*
++ * TLV types.  These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ * 
++ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
++ * indicates the size of the length field.  
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS     0x00    /* for low bit */
++#define ENV_LENGTH_8BITS      0x01
++
++#define ENV_TYPE_USER         0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END      0x00    
++#define ENV_TLV_TYPE_ENV      ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags 
++ */
++
++#define ENV_FLG_NORMAL                0x00    /* normal read/write */
++#define ENV_FLG_BUILTIN               0x01    /* builtin - not stored in flash */
++#define ENV_FLG_READONLY      0x02    /* read-only - cannot be changed */
++
++#define ENV_FLG_MASK          0xFF    /* mask of attributes we keep */
++#define ENV_FLG_ADMIN         0x100   /* lets us internally override permissions */
++
++
++/*  *********************************************************************
++    *  _nvram_read(buffer,offset,length)
++    *  
++    *  Read data from the NVRAM device
++    *  
++    *  Input parameters: 
++    *            buffer - destination buffer
++    *            offset - offset of data to read
++    *            length - number of bytes to read
++    *            
++    *  Return value:
++    *            number of bytes read, or <0 if error occured
++    ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++    int i;
++    if (offset > NVRAM_SIZE)
++      return -1; 
++
++    for ( i = 0; i < length; i++) {
++      buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++    }
++    return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++      while (*dest && (cnt > 0)) {
++      if (*dest == c) return (char *) dest;
++      dest++;
++      cnt--;
++      }
++      return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param     name    name of variable to get
++ * @return    value of variable or NULL if undefined
++ */
++
++char *cfe_env_get(unsigned char *nv_buf, const char *name)
++{
++    int size;
++    unsigned char *buffer;
++    unsigned char *ptr;
++    unsigned char *envval;
++    unsigned int reclen;
++    unsigned int rectype;
++    int offset;
++    int flg;
++    
++      if (!strcmp(name, "nvram_type"))
++              return "cfe";
++      
++    size = NVRAM_SIZE;
++    buffer = &_nvdata[0];
++
++    ptr = buffer;
++    offset = 0;
++
++    /* Read the record type and length */
++    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++      goto error;
++    }
++    
++    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
++
++      /* Adjust pointer for TLV type */
++      rectype = *(ptr);
++      offset++;
++      size--;
++
++      /* 
++       * Read the length.  It can be either 1 or 2 bytes
++       * depending on the code 
++       */
++      if (rectype & ENV_LENGTH_8BITS) {
++          /* Read the record type and length - 8 bits */
++          if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++              goto error;
++          }
++          reclen = *(ptr);
++          size--;
++          offset++;
++      }
++      else {
++          /* Read the record type and length - 16 bits, MSB first */
++          if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++              goto error;
++          }
++          reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++          size -= 2;
++          offset += 2;
++      }
++
++      if (reclen > size)
++          break;      /* should not happen, bad NVRAM */
++
++      switch (rectype) {
++          case ENV_TLV_TYPE_ENV:
++              /* Read the TLV data */
++              if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++                  goto error;
++              flg = *ptr++;
++              envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++              if (envval) {
++                  *envval++ = '\0';
++                  memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++                  _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0                 
++                  printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++                  if(!strcmp(ptr, name)){
++                      return _valuestr;
++                  }
++                  if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++                      return _valuestr;
++              }
++              break;
++              
++          default: 
++              /* Unknown TLV type, skip it. */
++              break;
++          }
++
++      /*
++       * Advance to next TLV 
++       */
++              
++      size -= (int)reclen;
++      offset += reclen;
++
++      /* Read the next record type */
++      ptr = buffer;
++      if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++          goto error;
++      }
++
++error:
++    return NULL;
++
++}
++
+--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
+@@ -37,6 +37,8 @@ struct nvram_header {
+ static char nvram_buf[NVRAM_SPACE];
+ static size_t nvram_len;
+ static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
+ static u32 find_nvram_size(void __iomem *end)
+ {
+@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem
+ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
+ {
+       struct nvram_header __iomem *header;
++      int i;
+       u32 off;
++      u32 *src, *dst;
+       u32 size;
+       if (nvram_len) {
+@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io
+               return -EEXIST;
+       }
++      cfe_env = 0;
++
++      /* XXX: hack for supporting the CFE environment stuff on WGT634U */
++      if (lim >= 8 * 1024 * 1024) {
++              src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
++              dst = (u32 *)nvram_buf;
++
++              if ((*src & 0xff00ff) == 0x000001) {
++                      printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++                      for (i = 0; i < 0x1ff0; i++) {
++                              if (*src == 0xFFFFFFFF)
++                                      break;
++                              *dst++ = *src++;
++                      }
++                      cfe_env = 1;
++                      return 0;
++              }
++      }
++
+       /* TODO: when nvram is on nand flash check for bad blocks first. */
+       off = FLASH_MIN;
+       while (off <= lim) {
+@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam
+       if (!name)
+               return -EINVAL;
++      if (cfe_env) {
++              value = cfe_env_get(nvram_buf, name);
++              if (!value)
++                      return -ENOENT;
++              return snprintf(val, val_len, "%s", value);
++      }
++
+       if (!nvram_len) {
+               err = nvram_init();
+               if (err)
diff --git a/target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch b/target/linux/bcm47xx/patches-4.14/830-huawei_e970_support.patch
new file mode 100644 (file)
index 0000000..b6150ed
--- /dev/null
@@ -0,0 +1,101 @@
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -37,6 +37,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
++#include <linux/old_gpio_wdt.h>
+ #include <asm/bootinfo.h>
+ #include <asm/idle.h>
+ #include <asm/prom.h>
+@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f
+       .duplex = DUPLEX_FULL,
+ };
++static struct gpio_wdt_platform_data gpio_wdt_data;
++
++static struct platform_device gpio_wdt_device = {
++      .name                   = "gpio-wdt",
++      .id                     = 0,
++      .dev                    = {
++              .platform_data  = &gpio_wdt_data,
++      },
++};
++
++static int __init bcm47xx_register_gpio_watchdog(void)
++{
++      enum bcm47xx_board board = bcm47xx_board_get();
++
++      switch (board) {
++      case BCM47XX_BOARD_HUAWEI_E970:
++              pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
++              gpio_wdt_data.gpio = 7;
++              gpio_wdt_data.interval = HZ;
++              gpio_wdt_data.first_interval = HZ / 5;
++              return platform_device_register(&gpio_wdt_device);
++      default:
++              /* Nothing to do */
++              return 0;
++      }
++}
++
+ static int __init bcm47xx_register_bus_complete(void)
+ {
+       switch (bcm47xx_bus_type) {
+@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c
+       bcm47xx_workarounds();
+       fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
++      bcm47xx_register_gpio_watchdog();
+       return 0;
+ }
+ device_initcall(bcm47xx_register_bus_complete);
+--- a/arch/mips/configs/bcm47xx_defconfig
++++ b/arch/mips/configs/bcm47xx_defconfig
+@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y
+ CONFIG_GPIO_SYSFS=y
+ CONFIG_WATCHDOG=y
+ CONFIG_BCM47XX_WDT=y
++CONFIG_GPIO_WDT=y
+ CONFIG_SSB_DEBUG=y
+ CONFIG_SSB_DRIVER_GIGE=y
+ CONFIG_BCMA_DRIVER_GMAC_CMN=y
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
+ }
+ EXPORT_SYMBOL(ssb_watchdog_timer_set);
++#ifdef CONFIG_BCM47XX
++#include <bcm47xx_board.h>
++
++static bool ssb_watchdog_supported(void)
++{
++      enum bcm47xx_board board = bcm47xx_board_get();
++
++      /* The Huawei E970 has a hardware watchdog using a GPIO */
++      switch (board) {
++      case BCM47XX_BOARD_HUAWEI_E970:
++              return false;
++      default:
++              return true;
++      }
++}
++#else
++static bool ssb_watchdog_supported(void)
++{
++      return true;
++}
++#endif
++
+ int ssb_watchdog_register(struct ssb_bus *bus)
+ {
+       struct bcm47xx_wdt wdt = {};
+       struct platform_device *pdev;
++      if (!ssb_watchdog_supported())
++              return 0;
++
+       if (ssb_chipco_available(&bus->chipco)) {
+               wdt.driver_data = &bus->chipco;
+               wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
diff --git a/target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch b/target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch
new file mode 100644 (file)
index 0000000..c2becac
--- /dev/null
@@ -0,0 +1,360 @@
+This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
+
+Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1472,6 +1472,15 @@ config WDT_MTX1
+         Hardware driver for the MTX-1 boards. This is a watchdog timer that
+         will reboot the machine after a 100 seconds timer expired.
++config GPIO_WDT
++      tristate "GPIO Hardware Watchdog"
++      help
++        Hardware driver for GPIO-controlled watchdogs. GPIO pin and
++        toggle interval settings are platform-specific. The driver
++        will stop toggling the GPIO (i.e. machine reboots) after a
++        100 second timer expired and no process has written to
++        /dev/watchdog during that time.
++
+ config PNX833X_WDT
+       tristate "PNX833x Hardware Watchdog"
+       depends on SOC_PNX8335
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -163,6 +163,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
+ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
+ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
++obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+--- /dev/null
++++ b/drivers/watchdog/old_gpio_wdt.c
+@@ -0,0 +1,301 @@
++/*
++ *      Driver for GPIO-controlled Hardware Watchdogs.
++ *
++ *      Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
++ *
++ *      Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
++ *
++ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
++ *                              All Rights Reserved.
++ *                              http://www.4g-systems.biz
++ *
++ *      (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ *      Neither Michael Stickel nor 4G Systems admit liability nor provide
++ *      warranty for any of this software. This material is provided
++ *      "AS-IS" and at no charge.
++ *
++ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
++ *
++ *      Release 0.01.
++ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
++ *
++ *      Release 0.02.
++ *      Author: Florian Fainelli florian@openwrt.org
++ *              use the Linux watchdog/timer APIs
++ *
++ *      Release 0.03.
++ *      Author: Mathias Adam <m.adam--linux@adamis.de>
++ *              make it a generic gpio watchdog driver
++ *
++ *      The Watchdog is configured to reset the MTX-1
++ *      if it is not triggered for 100 seconds.
++ *      It should not be triggered more often than 1.6 seconds.
++ *
++ *      A timer triggers the watchdog every 5 seconds, until
++ *      it is opened for the first time. After the first open
++ *      it MUST be triggered every 2..95 seconds.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/timer.h>
++#include <linux/completion.h>
++#include <linux/jiffies.h>
++#include <linux/watchdog.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++#include <linux/gpio.h>
++#include <linux/old_gpio_wdt.h>
++
++static int ticks = 100 * HZ;
++
++static struct {
++      struct completion stop;
++      spinlock_t lock;
++      int running;
++      struct timer_list timer;
++      int queue;
++      int default_ticks;
++      unsigned long inuse;
++      unsigned gpio;
++      unsigned int gstate;
++      int interval;
++      int first_interval;
++} gpio_wdt_device;
++
++static void gpio_wdt_trigger(unsigned long unused)
++{
++      spin_lock(&gpio_wdt_device.lock);
++      if (gpio_wdt_device.running && ticks > 0)
++              ticks -= gpio_wdt_device.interval;
++
++      /* toggle wdt gpio */
++      gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
++      gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
++
++      if (gpio_wdt_device.queue && ticks > 0)
++              mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
++      else
++              complete(&gpio_wdt_device.stop);
++      spin_unlock(&gpio_wdt_device.lock);
++}
++
++static void gpio_wdt_reset(void)
++{
++      ticks = gpio_wdt_device.default_ticks;
++}
++
++
++static void gpio_wdt_start(void)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&gpio_wdt_device.lock, flags);
++      if (!gpio_wdt_device.queue) {
++              gpio_wdt_device.queue = 1;
++              gpio_wdt_device.gstate = 1;
++              gpio_set_value(gpio_wdt_device.gpio, 1);
++              mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
++      }
++      gpio_wdt_device.running++;
++      spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
++}
++
++static int gpio_wdt_stop(void)
++{
++      unsigned long flags;
++
++      spin_lock_irqsave(&gpio_wdt_device.lock, flags);
++      if (gpio_wdt_device.queue) {
++              gpio_wdt_device.queue = 0;
++              gpio_wdt_device.gstate = 0;
++              gpio_set_value(gpio_wdt_device.gpio, 0);
++      }
++      ticks = gpio_wdt_device.default_ticks;
++      spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
++      return 0;
++}
++
++/* Filesystem functions */
++
++static int gpio_wdt_open(struct inode *inode, struct file *file)
++{
++      if (test_and_set_bit(0, &gpio_wdt_device.inuse))
++              return -EBUSY;
++      return nonseekable_open(inode, file);
++}
++
++
++static int gpio_wdt_release(struct inode *inode, struct file *file)
++{
++      clear_bit(0, &gpio_wdt_device.inuse);
++      return 0;
++}
++
++static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
++                                                      unsigned long arg)
++{
++      void __user *argp = (void __user *)arg;
++      int __user *p = (int __user *)argp;
++      unsigned int value;
++      static const struct watchdog_info ident = {
++              .options = WDIOF_CARDRESET,
++              .identity = "GPIO WDT",
++      };
++
++      switch (cmd) {
++      case WDIOC_GETSUPPORT:
++              if (copy_to_user(argp, &ident, sizeof(ident)))
++                      return -EFAULT;
++              break;
++      case WDIOC_GETSTATUS:
++      case WDIOC_GETBOOTSTATUS:
++              put_user(0, p);
++              break;
++      case WDIOC_SETOPTIONS:
++              if (get_user(value, p))
++                      return -EFAULT;
++              if (value & WDIOS_ENABLECARD)
++                      gpio_wdt_start();
++              else if (value & WDIOS_DISABLECARD)
++                      gpio_wdt_stop();
++              else
++                      return -EINVAL;
++              return 0;
++      case WDIOC_KEEPALIVE:
++              gpio_wdt_reset();
++              break;
++      default:
++              return -ENOTTY;
++      }
++      return 0;
++}
++
++
++static ssize_t gpio_wdt_write(struct file *file, const char *buf,
++                                              size_t count, loff_t *ppos)
++{
++      if (!count)
++              return -EIO;
++      gpio_wdt_reset();
++      return count;
++}
++
++static const struct file_operations gpio_wdt_fops = {
++      .owner          = THIS_MODULE,
++      .llseek         = no_llseek,
++      .unlocked_ioctl = gpio_wdt_ioctl,
++      .open           = gpio_wdt_open,
++      .write          = gpio_wdt_write,
++      .release        = gpio_wdt_release,
++};
++
++
++static struct miscdevice gpio_wdt_misc = {
++      .minor  = WATCHDOG_MINOR,
++      .name   = "watchdog",
++      .fops   = &gpio_wdt_fops,
++};
++
++
++static int gpio_wdt_probe(struct platform_device *pdev)
++{
++      int ret;
++      struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
++
++      gpio_wdt_device.gpio = gpio_wdt_data->gpio;
++      gpio_wdt_device.interval = gpio_wdt_data->interval;
++      gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
++      if (gpio_wdt_device.first_interval <= 0) {
++              gpio_wdt_device.first_interval = gpio_wdt_device.interval;
++      }
++
++      ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
++      if (ret < 0) {
++              dev_err(&pdev->dev, "failed to request gpio");
++              return ret;
++      }
++
++      spin_lock_init(&gpio_wdt_device.lock);
++      init_completion(&gpio_wdt_device.stop);
++      gpio_wdt_device.queue = 0;
++      clear_bit(0, &gpio_wdt_device.inuse);
++      setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
++      gpio_wdt_device.default_ticks = ticks;
++
++      gpio_wdt_start();
++      dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
++              gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
++      return 0;
++}
++
++static int gpio_wdt_remove(struct platform_device *pdev)
++{
++      /* FIXME: do we need to lock this test ? */
++      if (gpio_wdt_device.queue) {
++              gpio_wdt_device.queue = 0;
++              wait_for_completion(&gpio_wdt_device.stop);
++      }
++
++      gpio_free(gpio_wdt_device.gpio);
++      misc_deregister(&gpio_wdt_misc);
++      return 0;
++}
++
++static struct platform_driver gpio_wdt_driver = {
++      .probe = gpio_wdt_probe,
++      .remove = gpio_wdt_remove,
++      .driver.name = "gpio-wdt",
++      .driver.owner = THIS_MODULE,
++};
++
++static int __init gpio_wdt_init(void)
++{
++      return platform_driver_register(&gpio_wdt_driver);
++}
++arch_initcall(gpio_wdt_init);
++
++/*
++ * We do wdt initialization in two steps: arch_initcall probes the wdt
++ * very early to start pinging the watchdog (misc devices are not yet
++ * available), and later module_init() just registers the misc device.
++ */
++static int gpio_wdt_init_late(void)
++{
++      int ret;
++
++      ret = misc_register(&gpio_wdt_misc);
++      if (ret < 0) {
++              pr_err("GPIO_WDT: failed to register misc device\n");
++              return ret;
++      }
++      return 0;
++}
++#ifndef MODULE
++module_init(gpio_wdt_init_late);
++#endif
++
++static void __exit gpio_wdt_exit(void)
++{
++      platform_driver_unregister(&gpio_wdt_driver);
++}
++module_exit(gpio_wdt_exit);
++
++MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
++MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
++MODULE_ALIAS("platform:gpio-wdt");
+--- /dev/null
++++ b/include/linux/old_gpio_wdt.h
+@@ -0,0 +1,21 @@
++/*
++ *  Definitions for the GPIO watchdog driver
++ *
++ *  Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#ifndef _GPIO_WDT_H_
++#define _GPIO_WDT_H_
++
++struct gpio_wdt_platform_data {
++      int     gpio;           /* GPIO line number */
++      int     interval;       /* watchdog reset interval in system ticks */
++      int     first_interval; /* first wd reset interval in system ticks */
++};
++
++#endif /* _GPIO_WDT_H_ */
diff --git a/target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/bcm47xx/patches-4.14/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch
new file mode 100644 (file)
index 0000000..d7d2d7e
--- /dev/null
@@ -0,0 +1,30 @@
+From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 8 Apr 2015 06:58:11 +0200
+Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+If SoC has a CardBus we can set resources of device at slot 1 only. It's
+impossigle to set bridge resources as it simply overwrites device 1
+configuration and usually results in Data bus error-s.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/ssb/driver_pcicore.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
+       SSB_WARN_ON(!pc->hostmode);
+       if (unlikely(len != 1 && len != 2 && len != 4))
+               goto out;
++      /* CardBus SoCs allow configuring dev 1 resources only */
++      if (extpci_core->cardbusmode && dev != 1 &&
++          off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
++              goto out;
+       addr = get_cfgspace_addr(pc, bus, dev, func, off);
+       if (unlikely(!addr))
+               goto out;
diff --git a/target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch b/target/linux/bcm47xx/patches-4.14/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch
new file mode 100644 (file)
index 0000000..3ec8539
--- /dev/null
@@ -0,0 +1,233 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 18 Dec 2015 07:51:08 +0100
+Subject: [PATCH] Revert "bcma: switch GPIO portions to use GPIOLIB_IRQCHIP"
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This reverts commit 74f4e0cc61080f63f28e8d519bdf437957e64217.
+
+On BCM47XX (MIPS) bcma_bus_get_host_dev returns NULL which results in:
+[    0.157054] missing gpiochip .dev parent pointer
+[    0.157287] bcma: bus0: Error registering GPIO driver: -22
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/bcma/Kconfig                        |  2 +-
+ drivers/bcma/driver_gpio.c                  | 92 +++++++++++++++++++----------
+ include/linux/bcma/bcma_driver_chipcommon.h |  1 +
+ 3 files changed, 64 insertions(+), 31 deletions(-)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -104,7 +104,7 @@ config BCMA_DRIVER_GMAC_CMN
+ config BCMA_DRIVER_GPIO
+       bool "BCMA GPIO driver"
+       depends on BCMA && GPIOLIB
+-      select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
++      select IRQ_DOMAIN if BCMA_HOST_SOC
+       help
+         Driver to provide access to the GPIO pins of the bcma bus.
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -8,8 +8,10 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+-#include <linux/gpio/driver.h>
++#include <linux/gpio.h>
++#include <linux/irq.h>
+ #include <linux/interrupt.h>
++#include <linux/irqdomain.h>
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+@@ -72,11 +74,19 @@ static void bcma_gpio_free(struct gpio_c
+ }
+ #if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++      struct bcma_drv_cc *cc = gpiochip_get_data(chip);
++
++      if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++              return irq_find_mapping(cc->irq_domain, gpio);
++      else
++              return -EINVAL;
++}
+ static void bcma_gpio_irq_unmask(struct irq_data *d)
+ {
+-      struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+-      struct bcma_drv_cc *cc = gpiochip_get_data(gc);
++      struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+       int gpio = irqd_to_hwirq(d);
+       u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
+@@ -86,8 +96,7 @@ static void bcma_gpio_irq_unmask(struct
+ static void bcma_gpio_irq_mask(struct irq_data *d)
+ {
+-      struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+-      struct bcma_drv_cc *cc = gpiochip_get_data(gc);
++      struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+       int gpio = irqd_to_hwirq(d);
+       bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
+@@ -102,7 +111,6 @@ static struct irq_chip bcma_gpio_irq_chi
+ static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
+ {
+       struct bcma_drv_cc *cc = dev_id;
+-      struct gpio_chip *gc = &cc->gpio;
+       u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
+       u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
+       u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
+@@ -112,58 +120,81 @@ static irqreturn_t bcma_gpio_irq_handler
+       if (!irqs)
+               return IRQ_NONE;
+-      for_each_set_bit(gpio, &irqs, gc->ngpio)
+-              generic_handle_irq(irq_find_mapping(gc->irqdomain, gpio));
++      for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
++              generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
+       bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
+       return IRQ_HANDLED;
+ }
+-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
++static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+ {
+       struct gpio_chip *chip = &cc->gpio;
+-      int hwirq, err;
++      int gpio, hwirq, err;
+       if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+               return 0;
++      cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
++                                             &irq_domain_simple_ops, cc);
++      if (!cc->irq_domain) {
++              err = -ENODEV;
++              goto err_irq_domain;
++      }
++      for (gpio = 0; gpio < chip->ngpio; gpio++) {
++              int irq = irq_create_mapping(cc->irq_domain, gpio);
++
++              irq_set_chip_data(irq, cc);
++              irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
++                                       handle_simple_irq);
++      }
++
+       hwirq = bcma_core_irq(cc->core, 0);
+       err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+                         cc);
+       if (err)
+-              return err;
++              goto err_req_irq;
+       bcma_chipco_gpio_intmask(cc, ~0, 0);
+       bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
+-      err =  gpiochip_irqchip_add(chip,
+-                                  &bcma_gpio_irq_chip,
+-                                  0,
+-                                  handle_simple_irq,
+-                                  IRQ_TYPE_NONE);
+-      if (err) {
+-              free_irq(hwirq, cc);
+-              return err;
+-      }
+-
+       return 0;
++
++err_req_irq:
++      for (gpio = 0; gpio < chip->ngpio; gpio++) {
++              int irq = irq_find_mapping(cc->irq_domain, gpio);
++
++              irq_dispose_mapping(irq);
++      }
++      irq_domain_remove(cc->irq_domain);
++err_irq_domain:
++      return err;
+ }
+-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
++static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+ {
++      struct gpio_chip *chip = &cc->gpio;
++      int gpio;
++
+       if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+               return;
+       bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+       free_irq(bcma_core_irq(cc->core, 0), cc);
++      for (gpio = 0; gpio < chip->ngpio; gpio++) {
++              int irq = irq_find_mapping(cc->irq_domain, gpio);
++
++              irq_dispose_mapping(irq);
++      }
++      irq_domain_remove(cc->irq_domain);
+ }
+ #else
+-static int bcma_gpio_irq_init(struct bcma_drv_cc *cc)
++static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+ {
+       return 0;
+ }
+-static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc)
++static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+ {
+ }
+ #endif
+@@ -182,8 +213,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+       chip->set               = bcma_gpio_set_value;
+       chip->direction_input   = bcma_gpio_direction_input;
+       chip->direction_output  = bcma_gpio_direction_output;
+-      chip->owner             = THIS_MODULE;
+-      chip->parent            = bus->dev;
++#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
++      chip->to_irq            = bcma_gpio_to_irq;
++#endif
+ #if IS_BUILTIN(CONFIG_OF)
+       chip->of_node           = cc->core->dev.of_node;
+ #endif
+@@ -212,13 +244,13 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+       else
+               chip->base              = -1;
+-      err = gpiochip_add_data(chip, cc);
++      err = bcma_gpio_irq_domain_init(cc);
+       if (err)
+               return err;
+-      err = bcma_gpio_irq_init(cc);
++      err = gpiochip_add_data(chip, cc);
+       if (err) {
+-              gpiochip_remove(chip);
++              bcma_gpio_irq_domain_exit(cc);
+               return err;
+       }
+@@ -227,7 +259,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+ {
+-      bcma_gpio_irq_exit(cc);
++      bcma_gpio_irq_domain_exit(cc);
+       gpiochip_remove(&cc->gpio);
+       return 0;
+ }
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -645,6 +645,7 @@ struct bcma_drv_cc {
+       spinlock_t gpio_lock;
+ #ifdef CONFIG_BCMA_DRIVER_GPIO
+       struct gpio_chip gpio;
++      struct irq_domain *irq_domain;
+ #endif
+ };
diff --git a/target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch b/target/linux/bcm47xx/patches-4.14/940-bcm47xx-yenta.patch
new file mode 100644 (file)
index 0000000..bda27d1
--- /dev/null
@@ -0,0 +1,46 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
+        * Probe for usable interrupts using the force
+        * register to generate bogus card status events.
+        */
++#ifndef CONFIG_BCM47XX
++      /* WRT54G3G does not like this */
+       cb_writel(socket, CB_SOCKET_EVENT, -1);
+       cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+       reg = exca_readb(socket, I365_CSCINT);
+@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
+       }
+       cb_writel(socket, CB_SOCKET_MASK, 0);
+       exca_writeb(socket, I365_CSCINT, reg);
++#endif
+       mask = probe_irq_mask(val) & 0xffff;
+@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
+       else
+               socket->socket.irq_mask = 0;
++      /* irq mask probing is broken for the WRT54G3G */
++      if (socket->socket.irq_mask == 0)
++              socket->socket.irq_mask = 0x6f8;
++
+       dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
+                socket->socket.irq_mask, socket->cb_irq);
+ }
+@@ -1251,6 +1258,15 @@ static int yenta_probe(struct pci_dev *d
+       dev_info(&dev->dev, "Socket status: %08x\n",
+                cb_readl(socket, CB_SOCKET_STATE));
++      /* Generate an interrupt on card insert/remove */
++      config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++      /* Set up Multifunction Routing Status Register */
++      config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++      /* Switch interrupts to parallelized */
++      config_writeb(socket, 0x92, 0x64);
++
+       yenta_fixup_parent_bridge(dev->subordinate);
+       /* Register it with the pcmcia layer.. */
diff --git a/target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch b/target/linux/bcm47xx/patches-4.14/976-ssb_increase_pci_delay.patch
new file mode 100644 (file)
index 0000000..90bda51
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -389,7 +389,7 @@ static void ssb_pcicore_init_hostmode(st
+       set_io_port_base(ssb_pcicore_controller.io_map_base);
+       /* Give some time to the PCI controller to configure itself with the new
+        * values. Not waiting at this point causes crashes of the machine. */
+-      mdelay(10);
++      mdelay(300);
+       register_pci_controller(&ssb_pcicore_controller);
+ }
diff --git a/target/linux/bcm47xx/patches-4.14/999-wl_exports.patch b/target/linux/bcm47xx/patches-4.14/999-wl_exports.patch
new file mode 100644 (file)
index 0000000..2ecf651
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
+@@ -34,7 +34,8 @@ struct nvram_header {
+       u32 config_ncdl;        /* ncdl values for memc */
+ };
+-static char nvram_buf[NVRAM_SPACE];
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
+ static size_t nvram_len;
+ static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+ static int cfe_env;
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
diff --git a/target/linux/bcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch b/target/linux/bcm47xx/patches-4.19/031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch
new file mode 100644 (file)
index 0000000..34a79f9
--- /dev/null
@@ -0,0 +1,34 @@
+From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
+Date: Mon, 11 Mar 2019 22:08:22 +0100
+Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Eric has reported on OpenWrt's bug tracking system[1], that he's not
+able to use USB devices on his WNDR3400v2 device after the boot, until
+he turns on GPIO #21 manually through sysfs.
+
+1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
+
+Cc: Rafał Miłecki <zajec5@gmail.com>
+Cc: Hauke Mehrtens <hauke@hauke-m.de>
+Reported-by: Eric Bohlman <ericbohlman@gmail.com>
+Tested-by: Eric Bohlman <ericbohlman@gmail.com>
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+Signed-off-by: Paul Burton <paul.burton@mips.com>
+---
+ arch/mips/bcm47xx/workarounds.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm47xx/workarounds.c
++++ b/arch/mips/bcm47xx/workarounds.c
+@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
+       case BCM47XX_BOARD_NETGEAR_WNR3500L:
+               bcm47xx_workarounds_enable_usb_power(12);
+               break;
++      case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
+       case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+               bcm47xx_workarounds_enable_usb_power(21);
+               break;
diff --git a/target/linux/bcm47xx/patches-4.19/159-cpu_fixes.patch b/target/linux/bcm47xx/patches-4.19/159-cpu_fixes.patch
new file mode 100644 (file)
index 0000000..75e493b
--- /dev/null
@@ -0,0 +1,510 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -26,6 +26,38 @@
+ extern void (*r4k_blast_dcache)(void);
+ extern void (*r4k_blast_icache)(void);
++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++      return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++      unsigned long x;
++      get_dbe(x, (unsigned long *)addr);;
++}
++
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+  * This macro return a properly sign-extended address suitable as base address
+  * for indexed cache operations.  Two issues here:
+@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Index_Writeback_Inv_D, addr);
+       __dflush_epilogue
+ }
+@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Hit_Writeback_Inv_D, addr);
+       __dflush_epilogue
+ }
+@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+       __dflush_prologue
++      BCM4710_DUMMY_RREG();
+       cache_op(Hit_Invalidate_D, addr);
+       __dflush_epilogue
+ }
+@@ -206,6 +241,7 @@ static inline int protected_flush_icache
+ #ifdef CONFIG_EVA
+               return protected_cachee_op(Hit_Invalidate_I, addr);
+ #else
++              BCM4710_DUMMY_RREG();
+               return protected_cache_op(Hit_Invalidate_I, addr);
+ #endif
+       }
+@@ -219,6 +255,7 @@ static inline int protected_flush_icache
+  */
+ static inline int protected_writeback_dcache_line(unsigned long addr)
+ {
++      BCM4710_DUMMY_RREG();
+ #ifdef CONFIG_EVA
+       return protected_cachee_op(Hit_Writeback_Inv_D, addr);
+ #else
+@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
+               : "r" (base),                                           \
+                 "i" (op));
++static inline void blast_dcache(void)
++{
++      unsigned long start = KSEG0;
++      unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++      unsigned long end = (start + dcache_size);
++
++      do {
++              BCM4710_DUMMY_RREG();
++              cache_op(Index_Writeback_Inv_D, start);
++              start += current_cpu_data.dcache.linesz;
++      } while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++      unsigned long start = page;
++      unsigned long end = start + PAGE_SIZE;
++
++      BCM4710_FILL_TLB(start);
++      do {
++              BCM4710_DUMMY_RREG();
++              cache_op(Hit_Writeback_Inv_D, start);
++              start += current_cpu_data.dcache.linesz;
++      } while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++      unsigned long start = page;
++      unsigned long end = start + PAGE_SIZE;
++      unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++      unsigned long ws_end = current_cpu_data.dcache.ways <<
++                             current_cpu_data.dcache.waybit;
++      unsigned long ws, addr;
++      for (ws = 0; ws < ws_end; ws += ws_inc) {
++              start = page + ws;
++              for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++                      BCM4710_DUMMY_RREG();
++                      cache_op(Index_Writeback_Inv_D, addr);
++              }
++      }
++}
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)  \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
+ static inline void extra##blast_##pfx##cache##lsize(void)             \
+ {                                                                     \
+       unsigned long start = INDEX_BASE;                               \
+@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
++      war                                                             \
+       for (ws = 0; ws < ws_end; ws += ws_inc)                         \
+               for (addr = start; addr < end; addr += lsize * 32)      \
+                       cache##lsize##_unroll32(addr|ws, indexop);      \
+@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
++      war                                                             \
+       do {                                                            \
+               cache##lsize##_unroll32(start, hitop);                  \
+               start += lsize * 32;                                    \
+@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
+                              current_cpu_data.desc.waybit;            \
+       unsigned long ws, addr;                                         \
+                                                                       \
++      war                                                             \
++                                                                      \
+       __##pfx##flush_prologue                                         \
+                                                                       \
+       for (ws = 0; ws < ws_end; ws += ws_inc)                         \
+@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
+       __##pfx##flush_epilogue                                         \
+ }
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
+ #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
+ static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
+@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
+ __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)      \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2)   \
+ static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
+                                                   unsigned long end)  \
+ {                                                                     \
+       unsigned long lsize = cpu_##desc##_line_size();                 \
+-      unsigned long lsize_2 = lsize * 2;                              \
+-      unsigned long lsize_3 = lsize * 3;                              \
+-      unsigned long lsize_4 = lsize * 4;                              \
+-      unsigned long lsize_5 = lsize * 5;                              \
+-      unsigned long lsize_6 = lsize * 6;                              \
+-      unsigned long lsize_7 = lsize * 7;                              \
+-      unsigned long lsize_8 = lsize * 8;                              \
+       unsigned long addr = start & ~(lsize - 1);                      \
+-      unsigned long aend = (end + lsize - 1) & ~(lsize - 1);          \
+-      int lines = (aend - addr) / lsize;                              \
++      unsigned long aend = (end - 1) & ~(lsize - 1);                  \
++      war                                                             \
+                                                                       \
+       __##pfx##flush_prologue                                         \
+                                                                       \
+-      while (lines >= 8) {                                            \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              prot##cache_op(hitop, addr + lsize_2);                  \
+-              prot##cache_op(hitop, addr + lsize_3);                  \
+-              prot##cache_op(hitop, addr + lsize_4);                  \
+-              prot##cache_op(hitop, addr + lsize_5);                  \
+-              prot##cache_op(hitop, addr + lsize_6);                  \
+-              prot##cache_op(hitop, addr + lsize_7);                  \
+-              addr += lsize_8;                                        \
+-              lines -= 8;                                             \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x4) {                                              \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              prot##cache_op(hitop, addr + lsize_2);                  \
+-              prot##cache_op(hitop, addr + lsize_3);                  \
+-              addr += lsize_4;                                        \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x2) {                                              \
+-              prot##cache_op(hitop, addr);                            \
+-              prot##cache_op(hitop, addr + lsize);                    \
+-              addr += lsize_2;                                        \
+-      }                                                               \
+-                                                                      \
+-      if (lines & 0x1) {                                              \
++      while (1) {                                                     \
++              war2                                                    \
+               prot##cache_op(hitop, addr);                            \
++              if (addr == aend)                                       \
++                      break;                                          \
++              addr += lsize;                                          \
+       }                                                               \
+                                                                       \
+       __##pfx##flush_epilogue                                         \
+@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
+ #ifndef CONFIG_EVA
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
+ #else
+@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
+ __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
+ #endif
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
+ __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
+-      protected_, loongson2_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
++      protected_, loongson2_, , )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
+ /* Currently, this is very specific to Loongson-3 */
+ #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize)    \
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -428,6 +428,10 @@
+               eretnc
+ #else
+               .set    arch=r4000
++#ifdef CONFIG_BCM47XX
++              nop
++              nop
++#endif
+               eret
+               .set    mips0
+ #endif
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -21,6 +21,19 @@
+ #include <asm/war.h>
+ #include <asm/thread_info.h>
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++#  undef eret
++# endif
++# define eret                                         \
++      .set push;                              \
++      .set noreorder;                         \
++       nop;                                   \
++       nop;                                   \
++       eret;                                  \
++      .set pop;
++#endif
++
+       __INIT
+ /*
+@@ -32,6 +45,9 @@
+ NESTED(except_vec3_generic, 0, sp)
+       .set    push
+       .set    noat
++#ifdef CONFIG_BCM47XX
++      nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+       mfc0    k0, CP0_INDEX
+ #endif
+@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
+       .set    push
+       .set    arch=r4000
+       .set    noat
++#ifdef CONFIG_BCM47XX
++      nop
++#endif
+       mfc0    k1, CP0_CAUSE
+       li      k0, 31<<2
+       andi    k1, k1, 0x7c
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -39,6 +39,9 @@
+ #include <asm/dma-coherence.h>
+ #include <asm/mips-cps.h>
++/* For enabling BCM4710 cache workarounds */
++static int bcm4710 = 0;
++
+ /*
+  * Bits describing what cache ops an SMP callback function may perform.
+  *
+@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
+ {
+       unsigned long  dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache_page = blast_dcache_page;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache_user_page = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
+ {
+       unsigned long dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache_page_indexed = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
+ {
+       unsigned long dc_lsize = cpu_dcache_line_size();
++      if (bcm4710)
++              r4k_blast_dcache = blast_dcache;
++      else
+       if (dc_lsize == 0)
+               r4k_blast_dcache = (void *)cache_noop;
+       else if (dc_lsize == 16)
+@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
+       }
+       R4600_HIT_CACHEOP_WAR_IMPL;
++      BCM4710_PROTECTED_FILL_TLB(addr);
++      BCM4710_PROTECTED_FILL_TLB(addr + 4);
+       if (!cpu_has_ic_fills_f_dc) {
+               if (dc_lsize)
+                       vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
+@@ -1888,6 +1902,17 @@ static void coherency_setup(void)
+        * silly idea of putting something else there ...
+        */
+       switch (current_cpu_type()) {
++      case CPU_BMIPS3300:
++              {
++                      u32 cm;
++                      cm = read_c0_diag();
++                      /* Enable icache */
++                      cm |= (1 << 31);
++                      /* Enable dcache */
++                      cm |= (1 << 30);
++                      write_c0_diag(cm);
++              }
++              break;
+       case CPU_R4000PC:
+       case CPU_R4000SC:
+       case CPU_R4000MC:
+@@ -1934,6 +1959,15 @@ void r4k_cache_init(void)
+       extern void build_copy_page(void);
+       struct cpuinfo_mips *c = &current_cpu_data;
++      /* Check if special workarounds are required */
++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
++      if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++              printk("Enabling BCM4710A0 cache workarounds.\n");
++              bcm4710 = 1;
++      } else
++#endif
++              bcm4710 = 0;
++
+       probe_pcache();
+       probe_vcache();
+       setup_scache();
+@@ -2012,7 +2046,15 @@ void r4k_cache_init(void)
+        */
+       local_r4k___flush_cache_all(NULL);
++#ifdef CONFIG_BCM47XX
++      {
++              static void (*_coherency_setup)(void);
++              _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++              _coherency_setup();
++      }
++#else
+       coherency_setup();
++#endif
+       board_cache_error_setup = r4k_cache_error_setup;
+       /*
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -979,6 +979,9 @@ void build_get_pgde32(u32 **p, unsigned
+               uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+               uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++              uasm_i_nop(p);
++#endif
+               UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+               uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1340,6 +1343,9 @@ static void build_r4000_tlb_refill_handl
+ #ifdef CONFIG_64BIT
+               build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++              uasm_i_nop(&p);
++# endif
+               build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+@@ -1351,6 +1357,9 @@ static void build_r4000_tlb_refill_handl
+               build_update_entries(&p, K0, K1);
+               build_tlb_write_entry(&p, &l, &r, tlb_random);
+               uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++              uasm_i_nop(&p);
++#endif
+               uasm_i_eret(&p); /* return from trap */
+       }
+ #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+@@ -2046,6 +2055,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ #ifdef CONFIG_64BIT
+       build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++      uasm_i_nop(p);
++# endif
+       build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
+ #endif
+@@ -2092,6 +2104,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+       build_tlb_write_entry(p, l, r, tlb_indexed);
+       uasm_l_leave(l, *p);
+       build_restore_work_registers(p);
++#ifdef CONFIG_BCM47XX
++      uasm_i_nop(p);
++#endif
+       uasm_i_eret(p); /* return from trap */
+ #ifdef CONFIG_64BIT
diff --git a/target/linux/bcm47xx/patches-4.19/160-kmap_coherent.patch b/target/linux/bcm47xx/patches-4.19/160-kmap_coherent.patch
new file mode 100644 (file)
index 0000000..db5660b
--- /dev/null
@@ -0,0 +1,78 @@
+From: Jeff Hansen <jhansen@cardaccess-inc.com>
+Subject: [PATCH] kmap_coherent
+
+On ASUS WL-500gP there are some "Data bus error"s when executing simple
+commands liks "ps" or "cat /proc/1/cmdline".
+
+This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
+---
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -226,6 +226,9 @@
+ #ifndef cpu_has_local_ebase
+ #define cpu_has_local_ebase   1
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+ /*
+  * I-Cache snoops remote store.        This only matters on SMP.  Some multiprocessors
+--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -80,4 +80,6 @@
+ #define cpu_scache_line_size()                0
+ #define cpu_has_vz                    0
++#define cpu_use_kmap_coherent         0
++
+ #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
+               map_coherent = (cpu_has_dc_aliases &&
+                               page_mapcount(page) &&
+                               !Page_dcache_dirty(page));
+-              if (map_coherent)
++              if (map_coherent && cpu_use_kmap_coherent)
+                       vaddr = kmap_coherent(page, addr);
+               else
+                       vaddr = kmap_atomic(page);
+@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
+       }
+       if (vaddr) {
+-              if (map_coherent)
++              if (map_coherent && cpu_use_kmap_coherent)
+                       kunmap_coherent();
+               else
+                       kunmap_atomic(vaddr);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -168,7 +168,7 @@ void copy_user_highpage(struct page *to,
+       void *vfrom, *vto;
+       vto = kmap_atomic(to);
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(from) && !Page_dcache_dirty(from)) {
+               vfrom = kmap_coherent(from, vaddr);
+               copy_page(vto, vfrom);
+@@ -190,7 +190,7 @@ void copy_to_user_page(struct vm_area_st
+       struct page *page, unsigned long vaddr, void *dst, const void *src,
+       unsigned long len)
+ {
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(page) && !Page_dcache_dirty(page)) {
+               void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+               memcpy(vto, src, len);
+@@ -208,7 +208,7 @@ void copy_from_user_page(struct vm_area_
+       struct page *page, unsigned long vaddr, void *dst, const void *src,
+       unsigned long len)
+ {
+-      if (cpu_has_dc_aliases &&
++      if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+           page_mapcount(page) && !Page_dcache_dirty(page)) {
+               void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+               memcpy(dst, vfrom, len);
diff --git a/target/linux/bcm47xx/patches-4.19/209-b44-register-adm-switch.patch b/target/linux/bcm47xx/patches-4.19/209-b44-register-adm-switch.patch
new file mode 100644 (file)
index 0000000..bc2d2ab
--- /dev/null
@@ -0,0 +1,121 @@
+From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 9 Nov 2013 17:03:59 +0100
+Subject: [PATCH 210/210] b44: register adm switch
+
+---
+ drivers/net/ethernet/broadcom/b44.c |   57 +++++++++++++++++++++++++++++++++++
+ drivers/net/ethernet/broadcom/b44.h |    3 ++
+ 2 files changed, 60 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -31,6 +31,8 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/slab.h>
+ #include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/platform_data/adm6996-gpio.h>
+ #include <linux/uaccess.h>
+ #include <asm/io.h>
+@@ -2249,6 +2251,69 @@ static void b44_adjust_link(struct net_d
+       }
+ }
++#ifdef CONFIG_BCM47XX
++static int b44_register_adm_switch(struct b44 *bp)
++{
++      int gpio;
++      struct platform_device *pdev;
++      struct adm6996_gpio_platform_data adm_data = {0};
++      struct platform_device_info info = {0};
++
++      adm_data.model = ADM6996L;
++      gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
++      if (gpio >= 0)
++              adm_data.eecs = gpio;
++      else
++              adm_data.eecs = 2;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
++      if (gpio >= 0)
++              adm_data.eesk = gpio;
++      else
++              adm_data.eesk = 3;
++
++      gpio = bcm47xx_nvram_gpio_pin("adm_eedi");