ipq40xx: fix FRITZBox 7530 NAND controller node
authorDavid Bauer <mail@david-bauer.net>
Fri, 8 Mar 2019 23:50:49 +0000 (00:50 +0100)
committerChristian Lamparter <chunkeey@gmail.com>
Wed, 13 Mar 2019 15:25:34 +0000 (16:25 +0100)
This removes the 'cs-gpios' property from the AVM FRITZ!Box 7530 NAND
controller node. As pointed out by Christian Lamparter, the property is
not needed by the Qualcomm NAND controller driver.

Signed-off-by: David Bauer <mail@david-bauer.net>
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts

index 45c4864..ce117b4 100644 (file)
        pinctrl-0 = <&nand_pins>;
        pinctrl-names = "default";
        status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
        nand@0 {
                partitions {
index 53f83f4..b04a61d 100644 (file)
        pinctrl-0 = <&nand_pins>;
        pinctrl-names = "default";
        status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
        nand@0 {
                partitions {