-From 8ab0ea8e9275c03f253f84dc83ee86cdbeb1fcf4 Mon Sep 17 00:00:00 2001
-From: Hao Dong <halbertdong@gmail.com>
-Date: Sat, 19 Jan 2019 17:25:29 +0000
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
-
-This router has BCM4709C0, 128MB NAND flash (MX30LF1G18AC-TI),
-and 512MB memory, with 3 x LAN and 1 x WAN. WL chips are
-BCM4366C0 x 2. The router has a small LCD and 3 capactive keys
-driven by a PIC microcontroller, which is in turn wired to
-UART1 of main board.
-
-Everything except the LCD works. Hamster has activated LCD through
-UART1, but further programming, i.e., a independent package, is
-required to make sure its working properly.
-
-Since the firmware of Broadcom 4366c0 has been provided by
-openwrt.org, now its wireless is functional but limited. The
-"official" firmware cannot work properly in some 5G Hz channel.
-
-Signed-off-by: Hao Dong <halbertdong@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 75 +++++++++++++++++++++++
- 2 files changed, 76 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-luxul-xwr-3150-v1.dtb \
- bcm47094-netgear-r8500.dtb \
-+ bcm47094-phicomm-k3.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -0,0 +1,75 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+* Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
-+* Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
-+*/
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Phicomm K3";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart1 {
-+ status = "okay";
-+};
-+
-+&usb3_phy {
-+ status = "okay";
-+};
-+
-+&nandcs {
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x0000000 0x0080000>;
-+ read-only;
-+ };
-+
-+ partition@80000 {
-+ label = "nvram";
-+ reg = <0x0080000 0x0100000>;
-+ };
-+
-+ partition@180000{
-+ label = "phicomm";
-+ reg = <0x0180000 0x0280000>;
-+ read-only;
-+ };
-+
-+ partition@400000 {
-+ label = "firmware";
-+ reg = <0x0400000 0x7C00000>;
-+ compatible = "brcm,trx";
-+ };
-+ };
-+};
projects / openwrt / staging / wigyori.git / commitdiff