switch driver cleanup, 1st phase
authorGabor Juhos <juhosg@openwrt.org>
Mon, 15 Oct 2007 06:22:34 +0000 (06:22 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 15 Oct 2007 06:22:34 +0000 (06:22 +0000)
SVN-Revision: 9324

target/linux/adm5120/files/drivers/net/adm5120sw.c
target/linux/adm5120/files/drivers/net/adm5120sw.h
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h

index 80c81abf7430e5f1172fa478c046717ebc384123..5acdf393bde9bba7a9ffdc05703d68db50ec6ad8 100644 (file)
  *     TODO: Add support of high prio queues (currently disabled)
  *
  */
-#include <linux/autoconf.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/spinlock.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
 #include <asm/mipsregs.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_irq.h>
+#include <adm5120_switch.h>
+
 #include "adm5120sw.h"
 
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
+#define DRV_NAME       "adm5120-switch"
+#define DRV_DESC       "ADM5120 built-in ethernet switch driver"
+#define DRV_VERSION    "0.1.0"
 
 MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
 MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
 MODULE_LICENSE("GPL");
 
+/* ------------------------------------------------------------------------ */
+
+#if 1 /*def ADM5120_SWITCH_DEBUG*/
+#define SW_DBG(f, a...)                printk(KERN_DEBUG "%s: " f, DRV_NAME , ## a)
+#else
+#define SW_DBG(f, a...)                do {} while (0)
+#endif
+#define SW_ERR(f, a...)                printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
+#define SW_INFO(f, a...)       printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
+
+#define SWITCH_NUM_PORTS       6
+#define ETH_CSUM_LEN           4
+
+#define RX_MAX_PKTLEN  1550
+#define RX_RING_SIZE   64
+
+#define TX_RING_SIZE   32
+#define TX_QUEUE_LEN   28      /* Limit ring entries actually used. */
+#define TX_TIMEOUT     HZ*400
+
+#define SKB_ALLOC_LEN          (RX_MAX_PKTLEN + 32)
+#define SKB_RESERVE_LEN                (NET_IP_ALIGN + NET_SKB_PAD)
+
+#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
+#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
+#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
+#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
+                       SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
+                       SWITCH_INT_CPQF | SWITCH_INT_GQF)
+
+#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
+                       SWITCH_INTS_ERR | SWITCH_INTS_Q | \
+                       SWITCH_INT_MD | SWITCH_INT_PSC)
+
+#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
+#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF)
+
+/* ------------------------------------------------------------------------ */
+
+struct dma_desc {
+       __u32                   buf1;
+#define DESC_OWN               (1UL << 31)     /* Owned by the switch */
+#define DESC_EOR               (1UL << 28)     /* End of Ring */
+#define DESC_ADDR_MASK         0x1FFFFFF
+#define DESC_ADDR(x)   ((__u32)(x) & DESC_ADDR_MASK)
+       __u32                   buf2;
+#define DESC_BUF2_EN           (1UL << 31)     /* Buffer 2 enable */
+       __u32                   buflen;
+       __u32                   misc;
+/* definitions for tx/rx descriptors */
+#define DESC_PKTLEN_SHIFT      16
+#define DESC_PKTLEN_MASK       0x7FF
+/* tx descriptor specific part */
+#define DESC_CSUM              (1UL << 31)     /* Append checksum */
+#define DESC_DSTPORT_SHIFT     8
+#define DESC_DSTPORT_MASK      0x3F
+#define DESC_VLAN_MASK         0x3F
+/* rx descriptor specific part */
+#define DESC_SRCPORT_SHIFT     12
+#define DESC_SRCPORT_MASK      0x7
+#define DESC_DA_MASK           0x3
+#define DESC_DA_SHIFT          4
+#define DESC_IPCSUM_FAIL       (1UL << 3)      /* IP checksum fail */
+#define DESC_VLAN_TAG          (1UL << 2)      /* VLAN tag present */
+#define DESC_TYPE_MASK         0x3             /* mask for Packet type */
+#define DESC_TYPE_IP           0x0             /* IP packet */
+#define DESC_TYPE_PPPoE                0x1             /* PPPoE packet */
+} __attribute__ ((aligned(16)));
+
+static inline u32 desc_get_srcport(struct dma_desc *desc)
+{
+       return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
+}
+
+static inline u32 desc_get_pktlen(struct dma_desc *desc)
+{
+       return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
+}
+
+static inline int desc_ipcsum_fail(struct dma_desc *desc)
+{
+       return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
+}
+
+/* ------------------------------------------------------------------------ */
+
 /* default settings - unlimited TX and RX on all ports, default shaper mode */
-static unsigned char bw_matrix[SW_DEVS] = {
+static unsigned char bw_matrix[SWITCH_NUM_PORTS] = {
        0, 0, 0, 0, 0, 0
 };
 
 static int adm5120_nrdevs;
 
-static struct net_device *adm5120_devs[SW_DEVS];
+static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
 /* Lookup table port -> device */
-static struct net_device *adm5120_port[SW_DEVS];
-
-static struct adm5120_dma
-    adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
-    adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
-    adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
-    adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
-    *adm5120_dma_txh,
-    *adm5120_dma_txl,
-    *adm5120_dma_rxh,
-    *adm5120_dma_rxl;
-static struct sk_buff
-    *adm5120_skb_rxh[ADM5120_DMA_RXH],
-    *adm5120_skb_rxl[ADM5120_DMA_RXL],
-    *adm5120_skb_txh[ADM5120_DMA_TXH],
-    *adm5120_skb_txl[ADM5120_DMA_TXL];
-static int adm5120_rxli = 0;
-static int adm5120_txli = 0;
-/*static int adm5120_txhi = 0;*/
-static int adm5120_if_open = 0;
-
-static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
+
+static struct dma_desc txh_descs_v[TX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc txl_descs_v[TX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc rxh_descs_v[RX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc rxl_descs_v[RX_RING_SIZE] __attribute__((aligned(16)));
+static struct dma_desc *txh_descs;
+static struct dma_desc *txl_descs;
+static struct dma_desc *rxh_descs;
+static struct dma_desc *rxl_descs;
+
+static struct sk_buff *rxl_skbuff[RX_RING_SIZE];
+static struct sk_buff *rxh_skbuff[RX_RING_SIZE];
+static struct sk_buff *txl_skbuff[TX_RING_SIZE];
+static struct sk_buff *txh_skbuff[TX_RING_SIZE];
+
+static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
+static unsigned int cur_txl, dirty_txl;
+
+static unsigned int sw_used;
+
+static spinlock_t sw_lock = SPIN_LOCK_UNLOCKED;
+
+static struct net_device sw_dev;
+
+/* ------------------------------------------------------------------------ */
+
+static inline u32 sw_read_reg(u32 reg)
 {
-       *(volatile unsigned long*)(SW_BASE+reg) = val;
+       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
 }
 
-static inline unsigned long adm5120_get_reg(unsigned int reg)
+static inline void sw_write_reg(u32 reg, u32 val)
 {
-       return *(volatile unsigned long*)(SW_BASE+reg);
+       __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
 }
 
-static inline void adm5120_rx_dma_update(struct adm5120_dma *dma,
+static inline void sw_int_disable(u32 mask)
+{
+       u32     t;
+
+       t = sw_read_reg(SWITCH_REG_INT_MASK);
+       t |= mask;
+       sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_enable(u32 mask)
+{
+       u32     t;
+
+       t = sw_read_reg(SWITCH_REG_INT_MASK);
+       t &= ~mask;
+       sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_ack(u32 mask)
+{
+       sw_write_reg(SWITCH_REG_INT_STATUS, mask);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
+{
+       u32 t;
+
+       SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
+
+       t = desc->buf1;
+       SW_DBG("    buf1 %08X addr=%08X; len=%08X %s%s\n", t,
+               t & DESC_ADDR_MASK,
+               desc->buflen,
+               (t & DESC_OWN) ? "SWITCH" : "CPU",
+               (t & DESC_EOR) ? " RE" : "");
+
+       t = desc->buf2;
+       SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
+               t & DESC_ADDR_MASK,
+               (t & DESC_BUF2_EN) ? " EN" : "" );
+
+       t = desc->misc;
+       if (tx)
+               SW_DBG("    misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
+                       (t & DESC_CSUM) ? " CSUM" : "",
+                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+                       (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
+                       t & DESC_VLAN_MASK);
+       else
+               SW_DBG("    misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
+                       t,
+                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+                       (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
+                       (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
+                       (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
+                       (t & DESC_VLAN_TAG) ? " VLAN" : "",
+                       (t & DESC_TYPE_MASK));
+}
+
+static void sw_dump_intr_mask(char *label, u32 mask)
+{
+       SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+               label, mask,
+               (mask & SWITCH_INT_SHD) ? " SHD" : "",
+               (mask & SWITCH_INT_SLD) ? " SLD" : "",
+               (mask & SWITCH_INT_RHD) ? " RHD" : "",
+               (mask & SWITCH_INT_RLD) ? " RLD" : "",
+               (mask & SWITCH_INT_HDF) ? " HDF" : "",
+               (mask & SWITCH_INT_LDF) ? " LDF" : "",
+               (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
+               (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
+               (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
+               (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
+               (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
+               (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
+               (mask & SWITCH_INT_GQF) ? " GQF" : "",
+               (mask & SWITCH_INT_MD) ? " MD" : "",
+               (mask & SWITCH_INT_BCS) ? " BCS" : "",
+               (mask & SWITCH_INT_PSC) ? " PSC" : "",
+               (mask & SWITCH_INT_ID) ? " ID" : "",
+               (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
+               (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
+               (mask & SWITCH_INT_RDE) ? " RDE" : "",
+               (mask & SWITCH_INT_SDE) ? " SDE" : "",
+               (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
+}
+
+/* ------------------------------------------------------------------------ */
+
+static inline void adm5120_rx_dma_update(struct dma_desc *desc,
        struct sk_buff *skb, int end)
 {
-       dma->status = 0;
-       dma->cntl = 0;
-       dma->len = ADM5120_DMA_RXSIZE;
-       dma->data = ADM5120_DMA_ADDR(skb->data) |
-               ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0);
+       desc->misc = 0;
+       desc->buf2 = 0;
+       desc->buflen = RX_MAX_PKTLEN;
+       desc->buf1 = DESC_ADDR(skb->data) |
+               DESC_OWN | (end ? DESC_EOR : 0);
 }
 
-static int adm5120_rx(struct net_device *dev,int *budget)
+static int adm5120_switch_rx(struct net_device *dev, int *budget)
 {
        struct sk_buff *skb, *skbn;
        struct adm5120_sw *priv;
        struct net_device *cdev;
-       struct adm5120_dma *dma;
-       int port, len, quota;
+       struct dma_desc *desc;
+       int len, quota;
 
        quota = min(dev->quota, *budget);
-       dma = &adm5120_dma_rxl[adm5120_rxli];
-       while (!(dma->data & ADM5120_DMA_OWN) && quota) {
-               port = (dma->status & ADM5120_DMA_PORTID);
-               port >>= ADM5120_DMA_PORTSHIFT;
+       SW_DBG("%s polling, quota=%d\n", dev->name, quota);
+
+       sw_int_ack(SWITCH_INTS_POLL);
+
+       desc = &rxl_descs[cur_rxl];
+       while (!(desc->buf1 & DESC_OWN) && quota) {
+               u32 port = desc_get_srcport(desc);
                cdev = adm5120_port[port];
                if (cdev != dev) {      /* The current packet belongs to a different device */
                        if ((cdev==NULL) || !netif_running(cdev)) {
@@ -109,39 +305,38 @@ static int adm5120_rx(struct net_device *dev,int *budget)
                        }
 
                }
-               skb = adm5120_skb_rxl[adm5120_rxli];
-               len = (dma->status & ADM5120_DMA_LEN);
-               len >>= ADM5120_DMA_LENSHIFT;
-               len -= ETH_FCS;
+               skb = rxl_skbuff[cur_rxl];
+               len = desc_get_pktlen(desc);
+               len -= ETH_CSUM_LEN;
 
                priv = netdev_priv(dev);
-               if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
-                       dma->status & ADM5120_DMA_FCSERR) {
-                       priv->stats.rx_errors++;
+               if (len <= 0 || len > RX_MAX_PKTLEN ||
+                       desc_ipcsum_fail(desc)) {
+                       dev->stats.rx_errors++;
                        skbn = NULL;
                } else {
-                       skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+                       skbn = dev_alloc_skb(SKB_ALLOC_LEN);
                        if (skbn) {
                                skb_put(skb, len);
                                skb->dev = dev;
                                skb->protocol = eth_type_trans(skb, dev);
                                skb->ip_summed = CHECKSUM_UNNECESSARY;
                                dev->last_rx = jiffies;
-                               priv->stats.rx_packets++;
-                               priv->stats.rx_bytes += len;
-                               skb_reserve(skbn, NET_IP_ALIGN);
-                               adm5120_skb_rxl[adm5120_rxli] = skbn;
+                               dev->stats.rx_packets++;
+                               dev->stats.rx_bytes += len;
+                               skb_reserve(skbn, SKB_RESERVE_LEN);
+                               rxl_skbuff[cur_rxl] = skbn;
                        } else {
-                               printk(KERN_INFO "%s recycling!\n", dev->name);
+                               SW_INFO("%s recycling!\n", dev->name);
                        }
                }
 rx_skip:
-               adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
-                       adm5120_skb_rxl[adm5120_rxli],
-                       (ADM5120_DMA_RXL-1==adm5120_rxli));
-               if (ADM5120_DMA_RXL == ++adm5120_rxli)
-                       adm5120_rxli = 0;
-               dma = &adm5120_dma_rxl[adm5120_rxli];
+               adm5120_rx_dma_update(&rxl_descs[cur_rxl],
+                       rxl_skbuff[cur_rxl],
+                       (RX_RING_SIZE-1==cur_rxl));
+               if (RX_RING_SIZE == ++cur_rxl)
+                       cur_rxl = 0;
+               desc = &rxl_descs[cur_rxl];
                if (skbn){
                        netif_receive_skb(skb);
                        dev->quota--;
@@ -149,59 +344,92 @@ rx_skip:
                        quota--;
                }
        } /* while */
-       /* If there are still packets to process, return 1 */
-       if (quota){
-               /* No more packets to process, so disable the polling and reenable the interrupts */
+
+       if (quota) {
                netif_rx_complete(dev);
-               adm5120_set_reg(ADM5120_INT_MASK,
-                       adm5120_get_reg(ADM5120_INT_MASK) &
-                       ~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+               sw_int_enable(SWITCH_INTS_POLL);
                return 0;
-
-
        }
+
+       /* If there are still packets to process, return 1 */
        return 1;
 }
 
-static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+static void adm5120_switch_tx(void)
 {
-       unsigned long intreg, intmask;
-       int port;
-       struct net_device *dev;
+       unsigned int entry;
+
+       /* find and cleanup dirty tx descriptors */
+       entry = dirty_txl % TX_RING_SIZE;
+       while (dirty_txl != cur_txl) {
+               struct dma_desc *desc = &txl_descs[entry];
+               struct sk_buff *skb = txl_skbuff[entry];
+
+               if (desc->buf1 & DESC_OWN)
+                       break;
 
-       intmask = adm5120_get_reg(ADM5120_INT_MASK);   /* Remember interrupt mask */
-       adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */
-
-       intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */
-       adm5120_set_reg(ADM5120_INT_ST, intreg);  /* Clear interrupt status */
-
-       /* In NAPI operation the interrupts are disabled and the polling mechanism
-        * is activated. The interrupts are finally enabled again in the polling routine.
-        */
-       if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) {
-               /* check rx buffer for port number */
-               port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID;
-               port >>= ADM5120_DMA_PORTSHIFT;
-               dev = adm5120_port[port];
-               if ((dev==NULL) || !netif_running(dev)) {
-               /* discard (update with old skb) */
-                       adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
-                               adm5120_skb_rxl[adm5120_rxli],
-                               (ADM5120_DMA_RXL-1==adm5120_rxli));
-                       if (ADM5120_DMA_RXL == ++adm5120_rxli)
-                               adm5120_rxli = 0;
+               sw_dump_desc("tx done", desc, 1);
+               if (netif_running(skb->dev)) {
+                       skb->dev->stats.tx_bytes += skb->len;
+                       skb->dev->stats.tx_packets++;
                }
-               else {
-                       netif_rx_schedule(dev);
-                       intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */
+
+               dev_kfree_skb_irq(skb);
+               txl_skbuff[entry] = NULL;
+               entry = (++dirty_txl) % TX_RING_SIZE;
+       }
+
+       if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
+               /* wake up queue of all devices */
+               int i;
+               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+                       if (!adm5120_devs[i])
+                               continue;
+                       netif_wake_queue(adm5120_devs[i]);
                }
        }
-#ifdef CONFIG_DEBUG
-       if (intreg & ~(intmask))
-               printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask)));
-#endif
+}
+
+static irqreturn_t adm5120_poll_irq(int irq, void *dev_id)
+{
+       struct net_device *dev = dev_id;
+       u32 status;
+
+       status = sw_read_reg(SWITCH_REG_INT_STATUS);
+       status &= ~(sw_read_reg(SWITCH_REG_INT_MASK));
+
+       status &= SWITCH_INTS_POLL;
+       if (!status)
+               return IRQ_NONE;
+
+       sw_int_disable(SWITCH_INTS_POLL);
+       netif_rx_schedule(dev);
+
+       SW_DBG("%s handling IRQ%d\n", dev->name, irq);
+       return IRQ_HANDLED;
+}
 
-       adm5120_set_reg(ADM5120_INT_MASK, intmask);
+static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
+{
+       irqreturn_t ret;
+       u32 status;
+
+       status = sw_read_reg(SWITCH_REG_INT_STATUS);
+       status &= ~(sw_read_reg(SWITCH_REG_INT_MASK));
+
+       sw_dump_intr_mask("sw irq", status);
+
+       status &= SWITCH_INTS_ALL & ~SWITCH_INTS_POLL;
+       if (!status)
+               return IRQ_NONE;
+
+       sw_int_ack(status);
+
+       if (status & SWITCH_INT_SLD) {
+               spin_lock(&sw_lock);
+               adm5120_switch_tx();
+               spin_unlock(&sw_lock);
+       }
 
        return IRQ_HANDLED;
 }
@@ -212,13 +440,14 @@ static void adm5120_set_vlan(char *matrix)
        int vlan_port, port;
 
        val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       adm5120_set_reg(ADM5120_VLAN_GI, val);
+       sw_write_reg(SWITCH_REG_VLAN_G1, val);
        val = matrix[4] + (matrix[5]<<8);
-       adm5120_set_reg(ADM5120_VLAN_GII, val);
+       sw_write_reg(SWITCH_REG_VLAN_G2, val);
+
        /* Now set/update the port vs. device lookup table */
-       for (port=0; port<SW_DEVS; port++) {
-               for (vlan_port=0; vlan_port<SW_DEVS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
-               if (vlan_port <SW_DEVS)
+       for (port=0; port<SWITCH_NUM_PORTS; port++) {
+               for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+               if (vlan_port <SWITCH_NUM_PORTS)
                        adm5120_port[port] = adm5120_devs[vlan_port];
                else
                        adm5120_port[port] = NULL;
@@ -231,193 +460,181 @@ static void adm5120_set_bw(char *matrix)
 
        /* Port 0 to 3 are set using the bandwidth control 0 register */
        val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       adm5120_set_reg(ADM5120_BW_CTL0, val);
+       sw_write_reg(SWITCH_REG_BW_CNTL0, val);
 
        /* Port 4 and 5 are set using the bandwidth control 1 register */
        val = matrix[4];
        if (matrix[5] == 1)
-               adm5120_set_reg(ADM5120_BW_CTL1, val | 0x80000000);
+               sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
        else
-               adm5120_set_reg(ADM5120_BW_CTL1, val & ~0x8000000);
+               sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
 
-       printk(KERN_DEBUG "D: ctl0 0x%lx, ctl1 0x%lx\n",
-               adm5120_get_reg(ADM5120_BW_CTL0),
-               adm5120_get_reg(ADM5120_BW_CTL1));
+       SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
+               sw_read_reg(SWITCH_REG_BW_CNTL1));
 }
 
-static int adm5120_sw_open(struct net_device *dev)
+static int adm5120_switch_open(struct net_device *dev)
 {
-       unsigned long val;
+       u32 t;
        int i;
 
        netif_start_queue(dev);
-       if (!adm5120_if_open++) {
+       if (!sw_used++)
                /* enable interrupts on first open */
-               adm5120_set_reg(ADM5120_INT_MASK,
-                       adm5120_get_reg(ADM5120_INT_MASK) &
-                       ~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
-       }
+               sw_int_enable(SWITCH_INTS_USED);
+
        /* enable (additional) port */
-       val = adm5120_get_reg(ADM5120_PORT_CONF0);
-       for (i=0; i<SW_DEVS; i++) {
+       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
                if (dev == adm5120_devs[i])
-                       val &= ~adm5120_eth_vlans[i];
+                       t &= ~adm5120_eth_vlans[i];
        }
-       adm5120_set_reg(ADM5120_PORT_CONF0, val);
+       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
        return 0;
 }
 
-static int adm5120_sw_stop(struct net_device *dev)
+static int adm5120_switch_stop(struct net_device *dev)
 {
-       unsigned long val;
+       u32 t;
        int i;
 
-       if (!--adm5120_if_open) {
-               adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
-       }
+       if (!--sw_used)
+               sw_int_disable(SWITCH_INTS_USED);
+
        /* disable port if not assigned to other devices */
-       val = adm5120_get_reg(ADM5120_PORT_CONF0) | ADM5120_PORTDISALL;
-       for (i=0; i<SW_DEVS; i++) {
+       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+       t |= SWITCH_PORTS_NOCPU;
+       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
                if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
-                       val &= ~adm5120_eth_vlans[i];
+                       t &= ~adm5120_eth_vlans[i];
        }
-       adm5120_set_reg(ADM5120_PORT_CONF0, val);
+       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
        netif_stop_queue(dev);
        return 0;
 }
 
-static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+static int adm5120_sw_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-       struct adm5120_dma *dma;
-       struct sk_buff **skbl = adm5120_skb_txl;
+       struct dma_desc *desc;
        struct adm5120_sw *priv = netdev_priv(dev);
+       unsigned int entry;
        unsigned long data;
 
-       dev->trans_start = jiffies;
-       dma = &adm5120_dma_txl[adm5120_txli];
-       if (dma->data & ADM5120_DMA_OWN) {
+       /* calculate the next TX descriptor entry. */
+       entry = cur_txl % TX_RING_SIZE;
+
+       desc = &txl_descs[entry];
+       if (desc->buf1 & DESC_OWN) {
                /* We want to write a packet but the TX queue is still
                 * occupied by the DMA. We are faster than the DMA... */
                dev_kfree_skb(skb);
-               priv->stats.tx_dropped++;
+               dev->stats.tx_dropped++;
                return 0;
        }
-       data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
-       if (adm5120_txli == ADM5120_DMA_TXL-1)
-               data |= ADM5120_DMA_RINGEND;
-       dma->status =
-           ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+
+       txl_skbuff[entry] = skb;
+       data = (desc->buf1 & DESC_EOR);
+       data |= DESC_ADDR(skb->data);
+
+       desc->misc =
+           ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
            (0x1 << priv->port);
 
-       dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-       priv->stats.tx_packets++;
-       priv->stats.tx_bytes += skb->len;
+       desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+       /* lock switch irq */
+       spin_lock_irq(&sw_lock);
+
+       desc->buf1 = data | DESC_OWN;
+       sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
 
-       /* free old skbs here instead of tx completion interrupt:
-        * will hold some more memory allocated but reduces interrupts */
-       if (skbl[adm5120_txli]){
-               dev_kfree_skb(skbl[adm5120_txli]);
+       cur_txl++;
+       if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
+               /* FIXME: stop queue for all devices */
+               netif_stop_queue(dev);
        }
-       skbl[adm5120_txli] = skb;
 
-       dma->data = data; /* Here we enable the buffer for the TX DMA machine */
-       adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L);
-       if (++adm5120_txli == ADM5120_DMA_TXL)
-               adm5120_txli = 0;
+       dev->trans_start = jiffies;
+
+       spin_unlock_irq(&sw_lock);
+
        return 0;
 }
 
 static void adm5120_tx_timeout(struct net_device *dev)
 {
-       printk(KERN_INFO "%s: TX timeout\n",dev->name);
+       SW_INFO("TX timeout on %s\n",dev->name);
 }
 
-static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+static void adm5120_set_multicast_list(struct net_device *dev)
 {
        struct adm5120_sw *priv = netdev_priv(dev);
-       int portmask;
-       unsigned long adm5120_cpup_conf_reg;
+       u32 ports;
+       u32 t;
 
-       portmask = adm5120_eth_vlans[priv->port] & 0x3f;
-
-       adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF);
+       ports = adm5120_eth_vlans[priv->port] & SWITCH_PORTS_NOCPU;
 
+       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
        if (dev->flags & IFF_PROMISC)
-               adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL);
+               /* enable unknown packets */
+               t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
        else
-               adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT);
+               /* disable unknown packets */
+               t |= (ports << CPUP_CONF_DUNP_SHIFT);
 
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count)
-               adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL);
+       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+                                       dev->mc_count)
+               /* enable multicast packets */
+               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
        else
-               adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT);
-
-               /* If there is any port configured to be in promiscuous mode, then the */
-               /* Bridge Test Mode has to be activated. This will result in           */
-               /* transporting also packets learned in another VLAN to be forwarded   */
-               /* to the CPU.                                                         */
-               /* The difficult scenario is when we want to build a bridge on the CPU.*/
-               /* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
-               /* CPU port in VLAN1. Now we build a bridge on the CPU between         */
-               /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
-               /* Now assume a packet with ethernet source address 99 enters port 0   */
-               /* It will be forwarded to the CPU because it is unknown. Then the     */
-               /* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
-               /* When now a packet with ethernet destination address 99 comes in at  */
-               /* port 1 in VLAN1, then the switch has learned that this address is   */
-               /* located at port 0 in VLAN0. Therefore the switch will drop          */
-               /* this packet. In order to avoid this and to send the packet still    */
-               /* to the CPU, the Bridge Test Mode has to be activated.               */
-
-               /* Check if there is any vlan in promisc mode. */
-       if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL)
-               adm5120_cpup_conf_reg |= ADM5120_BTM;  /* Set the BTM     */
+               /* disable multicast packets */
+               t |= (ports << CPUP_CONF_DMCP_SHIFT);
+
+       /* If there is any port configured to be in promiscuous mode, then the */
+       /* Bridge Test Mode has to be activated. This will result in           */
+       /* transporting also packets learned in another VLAN to be forwarded   */
+       /* to the CPU.                                                         */
+       /* The difficult scenario is when we want to build a bridge on the CPU.*/
+       /* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
+       /* CPU port in VLAN1. Now we build a bridge on the CPU between         */
+       /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
+       /* Now assume a packet with ethernet source address 99 enters port 0   */
+       /* It will be forwarded to the CPU because it is unknown. Then the     */
+       /* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
+       /* When now a packet with ethernet destination address 99 comes in at  */
+       /* port 1 in VLAN1, then the switch has learned that this address is   */
+       /* located at port 0 in VLAN0. Therefore the switch will drop          */
+       /* this packet. In order to avoid this and to send the packet still    */
+       /* to the CPU, the Bridge Test Mode has to be activated.               */
+
+       /* Check if there is any vlan in promisc mode. */
+       if (t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
+               t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
        else
-               adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */
+               t |= CPUP_CONF_BTM;  /* Enable Bridge Testing Mode */
 
-       adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg);
+       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
 
-       return &((struct adm5120_sw *)netdev_priv(dev))->stats;
-}
-
-static void adm5120_set_multicast_list(struct net_device *dev)
-{
-       struct adm5120_sw *priv = netdev_priv(dev);
-       int portmask;
-
-       portmask = adm5120_eth_vlans[priv->port] & 0x3f;
-
-       if (dev->flags & IFF_PROMISC)
-               adm5120_set_reg(ADM5120_CPUP_CONF,
-                   adm5120_get_reg(ADM5120_CPUP_CONF) &
-                   ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
-       else
-               adm5120_set_reg(ADM5120_CPUP_CONF,
-                   adm5120_get_reg(ADM5120_CPUP_CONF) |
-                   (portmask << ADM5120_DISUNSHIFT));
-
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-           dev->mc_count)
-               adm5120_set_reg(ADM5120_CPUP_CONF,
-                   adm5120_get_reg(ADM5120_CPUP_CONF) &
-                   ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
-       else
-               adm5120_set_reg(ADM5120_CPUP_CONF,
-                   adm5120_get_reg(ADM5120_CPUP_CONF) |
-                   (portmask << ADM5120_DISMCSHIFT));
 }
 
 static void adm5120_write_mac(struct net_device *dev)
 {
        struct adm5120_sw *priv = netdev_priv(dev);
        unsigned char *mac = dev->dev_addr;
+       u32 t;
+
+       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
+               (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC4_SHIFT);
+       sw_write_reg(SWITCH_REG_MAC_WT1, t);
 
-       adm5120_set_reg(ADM5120_MAC_WT1,
-           mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
-       adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
-           (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
+               MAC_WT0_MAWC | MAC_WT0_WVE | (priv->port<<3);
 
-       while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+       sw_write_reg(SWITCH_REG_MAC_WT0, t);
+
+       while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
 }
 
 static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
@@ -436,115 +653,133 @@ static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
        struct adm5120_sw *priv = netdev_priv(dev);
 
        switch(cmd) {
-               case SIOCGADMINFO:
-                       info.magic = 0x5120;
-                       info.ports = adm5120_nrdevs;
-                       info.vlan = priv->port;
-                       err = copy_to_user(rq->ifr_data, &info, sizeof(info));
-                       if (err)
-                               return -EFAULT;
-                       break;
-               case SIOCSMATRIX:
-                       if (!capable(CAP_NET_ADMIN))
-                               return -EPERM;
-                       err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
-                           sizeof(adm5120_eth_vlans));
-                       if (err)
-                               return -EFAULT;
-                       adm5120_set_vlan(adm5120_eth_vlans);
-                       break;
-               case SIOCGMATRIX:
-                       err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
-                           sizeof(adm5120_eth_vlans));
-                       if (err)
-                               return -EFAULT;
-                       break;
-               case SIOCGETBW:
-                       err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
-                       if (err)
-                               return -EFAULT;
-                       break;
-               case SIOCSETBW:
-                       if (!capable(CAP_NET_ADMIN))
-                               return -EPERM;
-                       err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
-                       if (err)
-                               return -EFAULT;
-                       adm5120_set_bw(bw_matrix);
-                       break;
-               default:
-                       return -EOPNOTSUPP;
+       case SIOCGADMINFO:
+               info.magic = 0x5120;
+               info.ports = adm5120_nrdevs;
+               info.vlan = priv->port;
+               err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+               if (err)
+                       return -EFAULT;
+               break;
+       case SIOCSMATRIX:
+               if (!capable(CAP_NET_ADMIN))
+                       return -EPERM;
+               err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
+                                       sizeof(adm5120_eth_vlans));
+               if (err)
+                       return -EFAULT;
+               adm5120_set_vlan(adm5120_eth_vlans);
+               break;
+       case SIOCGMATRIX:
+               err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
+                                       sizeof(adm5120_eth_vlans));
+               if (err)
+                       return -EFAULT;
+               break;
+       case SIOCGETBW:
+               err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
+               if (err)
+                       return -EFAULT;
+               break;
+       case SIOCSETBW:
+               if (!capable(CAP_NET_ADMIN))
+                       return -EPERM;
+               err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
+               if (err)
+                       return -EFAULT;
+               adm5120_set_bw(bw_matrix);
+               break;
+       default:
+               return -EOPNOTSUPP;
        }
        return 0;
 }
 
-static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int num)
+static void adm5120_dma_tx_init(struct dma_desc *desc, struct sk_buff **skbl,
+               int num)
 {
-       memset(dma, 0, sizeof(struct adm5120_dma)*num);
-       dma[num-1].data |= ADM5120_DMA_RINGEND;
+       memset(desc, 0, num * sizeof(*desc));
+       desc[num-1].buf1 |= DESC_EOR;
        memset(skbl, 0, sizeof(struct skb*)*num);
 }
 
-static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int num)
+static void adm5120_dma_rx_init(struct dma_desc *desc, struct sk_buff **skbl,
+               int num)
 {
        int i;
 
-       memset(dma, 0, sizeof(struct adm5120_dma)*num);
+       memset(desc, 0, num * sizeof(*desc));
        for (i=0; i<num; i++) {
-               skbl[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+               skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
                if (!skbl[i]) {
                        i=num;
                        break;
                }
-               skb_reserve(skbl[i], NET_IP_ALIGN);
-               adm5120_rx_dma_update(&dma[i], skbl[i], (num-1==i));
+               skb_reserve(skbl[i], SKB_RESERVE_LEN);
+               adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
        }
 }
 
 static int __init adm5120_sw_init(void)
 {
-       int i, err;
        struct net_device *dev;
+       u32 t;
+       int i, err;
 
-       err = request_irq(ADM5120_IRQ_SWITCH, adm5120_sw_irq, 0, "ethernet switch", NULL);
+       err = request_irq(ADM5120_IRQ_SWITCH, adm5120_switch_irq,
+               (IRQF_SHARED | IRQF_DISABLED), "switch", &sw_dev);
        if (err)
                goto out;
 
        adm5120_nrdevs = adm5120_eth_num_ports;
 
-       adm5120_set_reg(ADM5120_CPUP_CONF,
-           ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
-           ADM5120_DISUNALL | ADM5120_DISMCALL);
-       adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP | ADM5120_PORTDISALL);
-
-       adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
-           ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
-       adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
-           ADM5120_PHY_NTH);
+       t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
+               SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
+               SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
+       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
+
+       t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
+               (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
+               (SWITCH_PORTS_NOCPU);
+       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
+       /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
+       t =  SWITCH_PORTS_PHY |
+               (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
+               (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
+               (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
+               (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
+               PHY_CNTL2_RMAE;
+       SW_WRITE_REG(PHY_CNTL2, t);
+
+       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
+       t |= PHY_CNTL3_RNT;
+       sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
 
        /* Force all the packets from all ports are low priority */
-       adm5120_set_reg(ADM5120_PRI_CNTL, 0);
-
-       adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
-       adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
-
-       adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
-       adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
-       adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
-       adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
-
-       adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
-       adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
-       adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
-       adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
-       adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
-       adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
-       adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
-       adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
-
-       for (i = 0; i < SW_DEVS; i++) {
+       sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
+
+       sw_int_disable(SWITCH_INTS_ALL);
+       sw_int_ack(SWITCH_INTS_ALL);
+
+       cur_txl = dirty_txl = 0;
+       cur_rxl = dirty_rxl = 0;
+
+       txh_descs = (void *)KSEG1ADDR((u32)txh_descs_v);
+       txl_descs = (void *)KSEG1ADDR((u32)txl_descs_v);
+       rxh_descs = (void *)KSEG1ADDR((u32)rxh_descs_v);
+       rxl_descs = (void *)KSEG1ADDR((u32)rxl_descs_v);
+
+       adm5120_dma_tx_init(txh_descs, txh_skbuff, TX_RING_SIZE);
+       adm5120_dma_tx_init(txl_descs, txl_skbuff, TX_RING_SIZE);
+       adm5120_dma_rx_init(rxh_descs, rxh_skbuff, RX_RING_SIZE);
+       adm5120_dma_rx_init(rxl_descs, rxl_skbuff, RX_RING_SIZE);
+       sw_write_reg(SWITCH_REG_SHDA, KSEG1ADDR(txh_descs));
+       sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
+       sw_write_reg(SWITCH_REG_RHDA, KSEG1ADDR(rxh_descs));
+       sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
+
+       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
                adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
                if (!adm5120_devs[i]) {
                        err = -ENOMEM;
@@ -552,37 +787,46 @@ static int __init adm5120_sw_init(void)
                }
 
                dev = adm5120_devs[i];
+               err = request_irq(ADM5120_IRQ_SWITCH, adm5120_poll_irq,
+                       (IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
+               if (err) {
+                       SW_ERR("unable to get irq for %s\n", dev->name);
+                       goto out_int;
+               }
+
                SET_MODULE_OWNER(dev);
                memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
                ((struct adm5120_sw*)netdev_priv(dev))->port = i;
-               dev->base_addr = SW_BASE;
+               dev->base_addr = ADM5120_SWITCH_BASE;
                dev->irq = ADM5120_IRQ_SWITCH;
-               dev->open = adm5120_sw_open;
-               dev->hard_start_xmit = adm5120_sw_tx;
-               dev->stop = adm5120_sw_stop;
-               dev->get_stats = adm5120_sw_stats;
+               dev->open = adm5120_switch_open;
+               dev->hard_start_xmit = adm5120_sw_start_xmit;
+               dev->stop = adm5120_switch_stop;
                dev->set_multicast_list = adm5120_set_multicast_list;
                dev->do_ioctl = adm5120_do_ioctl;
                dev->tx_timeout = adm5120_tx_timeout;
-               dev->watchdog_timeo = ETH_TX_TIMEOUT;
+               dev->watchdog_timeo = TX_TIMEOUT;
                dev->set_mac_address = adm5120_sw_set_mac_address;
-               dev->poll = adm5120_rx;
+               dev->poll = adm5120_switch_rx;
                dev->weight = 64;
 
                memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
                adm5120_write_mac(dev);
 
                if ((err = register_netdev(dev))) {
+                       free_irq(ADM5120_IRQ_SWITCH, dev);
                        free_netdev(dev);
                        goto out_int;
                }
-               printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+               SW_INFO("%s created for switch port%d\n", dev->name, i);
        }
        /* setup vlan/port mapping after devs are filled up */
        adm5120_set_vlan(adm5120_eth_vlans);
 
-       adm5120_set_reg(ADM5120_CPUP_CONF,
-           ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+       /* enable CPU port */
+       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
+       t &= ~CPUP_CONF_DCPUP;
+       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
 
        return 0;
 
@@ -594,7 +838,7 @@ out_int:
        }
        free_irq(ADM5120_IRQ_SWITCH, NULL);
 out:
-       printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+       SW_ERR("init failed\n");
        return err;
 }
 
@@ -602,22 +846,25 @@ static void __exit adm5120_sw_exit(void)
 {
        int i;
 
-       for (i = 0; i < SW_DEVS; i++) {
-               unregister_netdev(adm5120_devs[i]);
-               free_netdev(adm5120_devs[i]);
+       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+               struct net_device *dev = adm5120_devs[i];
+               unregister_netdev(dev);
+               free_irq(ADM5120_IRQ_SWITCH, dev);
+               free_netdev(dev);
        }
 
-       free_irq(ADM5120_IRQ_SWITCH, NULL);
+       free_irq(ADM5120_IRQ_SWITCH, &sw_dev);
 
-       for (i = 0; i < ADM5120_DMA_RXH; i++) {
-               if (!adm5120_skb_rxh[i])
+       for (i = 0; i < RX_RING_SIZE; i++) {
+               if (!rxh_skbuff[i])
                        break;
-               kfree_skb(adm5120_skb_rxh[i]);
+               kfree_skb(rxh_skbuff[i]);
        }
-       for (i = 0; i < ADM5120_DMA_RXL; i++) {
-               if (!adm5120_skb_rxl[i])
+
+       for (i = 0; i < RX_RING_SIZE; i++) {
+               if (!rxl_skbuff[i])
                        break;
-               kfree_skb(adm5120_skb_rxl[i]);
+               kfree_skb(rxl_skbuff[i]);
        }
 }
 
index a3b4ec0179c7d987612a53a90853f7676a894afc..34f12137497418e57ab09220853a9e1f6657e677 100644 (file)
 #ifndef _INCLUDE_ADM5120SW_H_
 #define _INCLUDE_ADM5120SW_H_
 
-#define SW_BASE        KSEG1ADDR(0x12000000)
-#define SW_DEVS        6
-
-#define ETH_TX_TIMEOUT         HZ*400
-#define ETH_FCS 4;
-
-#define ADM5120_CODE           0x00            /* CPU description */
-#define ADM5120_CODE_PQFP      0x20000000      /* package type */
-#define ADM5120_SW_CONF                0x20            /* Switch configuration register */
-#define ADM5120_SW_CONF_BPM    0x00300000      /* Mask for backpressure mode */
-#define ADM5120_CPUP_CONF      0x24            /* CPU port config */
-#define ADM5120_DISCCPUPORT    0x00000001      /* disable cpu port */
-#define ADM5120_CRC_PADDING    0x00000002      /* software crc */
-#define ADM5120_BTM            0x00000004      /* bridge test mode */
-#define ADM5120_DISUNSHIFT     9
-#define ADM5120_DISUNALL       0x00007e00      /* disable unknown from all */
-#define ADM5120_DISMCSHIFT     16
-#define ADM5120_DISMCALL       0x003f0000      /* disable multicast from all */
-#define ADM5120_PORT_CONF0     0x28
-#define ADM5120_ENMC           0x00003f00      /* Enable MC routing (ex cpu) */
-#define ADM5120_ENBP           0x003f0000      /* Enable Back Pressure */
-#define ADM5120_PORTDISALL             0x0000003F
-#define ADM5120_VLAN_GI                0x40            /* VLAN settings */
-#define ADM5120_VLAN_GII       0x44
-#define ADM5120_SEND_TRIG      0x48
-#define ADM5120_SEND_TRIG_L    0x00000001
-#define ADM5120_SEND_TRIG_H    0x00000002
-#define ADM5120_MAC_WT0                0x58
-#define ADM5120_MAC_WRITE      0x00000001
-#define ADM5120_MAC_WRITE_DONE 0x00000002
-#define ADM5120_VLAN_EN                0x00000040
-#define ADM5120_MAC_WT1                0x5c
-#define ADM5120_BW_CTL0                0x60            /* Bandwidth control 0 */
-#define ADM5120_BW_CTL1                0x64            /* Bandwidth control 1 */
-#define ADM5120_PHY_CNTL2      0x7c
-#define ADM5120_AUTONEG                0x0000001f      /* Auto negotiate */
-#define ADM5120_NORMAL         0x01f00000      /* PHY normal mode */
-#define ADM5120_AUTOMDIX       0x3e000000      /* Auto MDIX */
-#define ADM5120_PHY_CNTL3      0x80
-#define ADM5120_PHY_NTH                0x00000400
-#define ADM5120_PRI_CNTL       0x84
-#define ADM5120_INT_ST         0xb0
-#define ADM5120_INT_RXH                0x0000004
-#define ADM5120_INT_RXL                0x0000008
-#define ADM5120_INT_HFULL      0x0000010
-#define ADM5120_INT_LFULL      0x0000020
-#define ADM5120_INT_TXH                0x0000001
-#define ADM5120_INT_TXL                0x0000002
-#define ADM5120_INT_MASK       0xb4
-#define ADM5120_INTMASKALL     0x1FDEFFF       /* All interrupts */
-#define ADM5120_INTHANDLE      (ADM5120_INT_RXH | ADM5120_INT_RXL | \
-                                ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
-                                ADM5120_INT_TXH | ADM5120_INT_TXL)
-#define ADM5120_SEND_HBADDR    0xd0
-#define ADM5120_SEND_LBADDR    0xd4
-#define ADM5120_RECEIVE_HBADDR 0xd8
-#define ADM5120_RECEIVE_LBADDR 0xdc
-
-struct adm5120_dma {
-       u32 data;
-       u32 cntl;
-       u32 len;
-       u32 status;
-} __attribute__ ((packed));
-
-#define        ADM5120_DMA_MASK        0x01ffffff
-#define ADM5120_DMA_OWN                0x80000000      /* buffer owner */
-#define ADM5120_DMA_RINGEND    0x10000000      /* Last in DMA ring */
-
-#define ADM5120_DMA_ADDR(ptr)  ((u32)(ptr) & ADM5120_DMA_MASK)
-#define ADM5120_DMA_PORTID     0x00007000
-#define ADM5120_DMA_PORTSHIFT  12
-#define ADM5120_DMA_LEN                0x07ff0000
-#define ADM5120_DMA_LENSHIFT   16
-#define ADM5120_DMA_FCSERR     0x00000008
-
-#define ADM5120_DMA_TXH                2
-#define ADM5120_DMA_TXL                64
-#define ADM5120_DMA_RXH                2
-#define ADM5120_DMA_RXL                64
-
-#define ADM5120_DMA_RXSIZE     1550
-#define ADM5120_DMA_EXTRA      20
-
 struct adm5120_sw {
-       int                     port;
-       struct net_device_stats stats;
+       int     port;
 };
 
 #define SIOCSMATRIX    SIOCDEVPRIVATE
index c3af94ba747772148f7d2172a4d07336d0ad5a8c..d185ce531614b9b794c998e06198eeb45bce2b1a 100644 (file)
 #define CPUP_CONF_DCPUP                BIT(0)  /* Disable CPU port */
 #define CPUP_CONF_CRCP         BIT(1)  /* CRC padding from CPU */
 #define CPUP_CONF_BTM          BIT(2)  /* Bridge Testing Mode */
+#define CPUP_CONF_DUNP_SHIFT   9       /* Disable Unknown Packets for portX */
+#define CPUP_CONF_DMCP_SHIFT   16      /* Disable Mcast Packets form portX */
+#define CPUP_CONF_DBCP_SHIFT   24      /* Disable Bcast Packets form portX */
 
 /* PORT_CONF0 register bits */
 #define PORT_CONF0_DP_SHIFT    0       /* Disable Port */
 #define SEND_TRIG_STL          BIT(0)  /* Send Trigger Low */
 #define SEND_TRIG_STH          BIT(1)  /* Send Trigger High */
 
+/* MAC_WT0 register bits */
+#define MAC_WT0_MAWC           BIT(0)  /* MAC address write command */
+#define MAC_WT0_MWD_SHIFT      1
+#define MAC_WT0_MWD            BIT(1)  /* MAC write done */
+#define MAC_WT0_WFB            BIT(2)  /* Write Filter Bit */
+#define MAC_WT0_WVN_SHIFT      3
+#define MAC_WT0_WVE            BIT(6)  /* Write VLAN enable */
+#define MAC_WT0_WPMN_SHIFT     7
+#define MAC_WT0_WAF_SHIFT      13      /* Write Age Field shift */
+#define MAC_WT0_WAF_EMPTY      0
+#define MAC_WT0_WAF_STATIC     7
+#define MAC_WT0_MAC0_SHIFT     16
+#define MAC_WT0_MAC1_SHIFT     24
+
+/* MAC_WT1 register bits */
+#define MAC_WT1_MAC2_SHIFT     0
+#define MAC_WT1_MAC3_SHIFT     8
+#define MAC_WT1_MAC4_SHIFT     16
+#define MAC_WT1_MAC5_SHIFT     24
+
 /* BW_CNTL0/BW_CNTL1 register bits */
 #define BW_CNTL_DISABLE                0x00
 #define BW_CNTL_64K            0x01
 /* PHY_CNTL2_RMAE is bad in datasheet */
 #define PHY_CNTL2_RMAE         BIT(31) /* Recommended MCC Average enable */
 
+/* PHY_CNTL3 register bits */
+#define PHY_CNTL3_RNT          BIT(10) /* Recommend Normal Threshold */
+
 /* PORT_TH register bits */
 #define PORT_TH_PPT_MASK       BITMASK(8)      /* Per Port Threshold */
 #define PORT_TH_CPUT_SHIFT     8               /* CPU Port Buffer Threshold */