lantiq: enable FXS ports on VR200v
authorKevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Fri, 2 Nov 2018 22:50:25 +0000 (23:50 +0100)
committerJohn Crispin <john@phrozen.org>
Mon, 26 Nov 2018 11:30:33 +0000 (12:30 +0100)
Disables SMP support.
Add VR200 target to keep SMP on FXS-less device variant.

Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
target/linux/lantiq/base-files/etc/board.d/02_network
target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts [new file with mode: 0644]
target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi [new file with mode: 0644]
target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
target/linux/lantiq/image/tp-link.mk

index 7817bdd..8689440 100755 (executable)
@@ -195,7 +195,7 @@ arcadyan,vg3503j)
                "2:lan:2" "4:lan:1" "6t@eth0"
        ;;
 
-tplink,vr200v)
+tplink,vr200|tplink,vr200v)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
        ucidef_add_switch "switch0" \
                "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts
new file mode 100644 (file)
index 0000000..74f666d
--- /dev/null
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+#include "VR200.dtsi"
+
+/ {
+       compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9";
+       model = "TP-LINK Archer VR200";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-wifi = &wlan5g;
+
+               led-usb = &led_usb;
+               led-usb2 = &led_usb;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               led {
+                       label = "led";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_LIGHTS_TOGGLE>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power: power {
+                       label = "vr200:blue:power";
+                       gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               dsl: dsl {
+                       label = "vr200:blue:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+               internet: internet {
+                       label = "vr200:blue:internet";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+               led_usb: usb {
+                       label = "vr200:blue:usb";
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+               };
+               eth {
+                       label = "vr200:blue:lan";
+                       gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+               };
+               wlan {
+                       label = "vr200:blue:wlan";
+                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+               };
+               wlan5g: wifi {
+                       label = "vr200:blue:wlan5g";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+               };
+               led_wps {
+                       label = "vr200:blue:wps";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+               };
+       };      
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi
new file mode 100644 (file)
index 0000000..dcfa861
--- /dev/null
@@ -0,0 +1,219 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+       memory@0 {
+               reg = <0x0 0x7f00000>;
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&romfile 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               reg = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};
+
+&gphy0 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+       lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               mdio {
+                       lantiq,groups = "mdio";
+                       lantiq,function = "mdio";
+               };
+               gphy-leds {
+                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                       lantiq,function = "gphy";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               phy-rst {
+                       lantiq,pins = "io42";
+                       lantiq,pull = <0>;
+                       lantiq,open-drain = <0>;
+                       lantiq,output = <1>;
+               };
+               pcie-rst {
+                       lantiq,pins = "io38";
+                       lantiq,pull = <0>;
+                       lantiq,output = <1>;
+               };
+       };
+       pins_spi_default: pins_spi_default {
+               spi_in {
+                       lantiq,groups = "spi_di";
+                       lantiq,function = "spi";
+               };
+               spi_out {
+                       lantiq,groups = "spi_do", "spi_clk",
+                               "spi_cs4";
+                       lantiq,function = "spi";
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <33250000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0xf90000>;
+                               label = "firmware";
+                       };
+
+                       partition@fb0000 {
+                               reg = <0xfb0000 0x10000>;
+                               label = "radioDECT";
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               reg = <0xfc0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
+
+                       romfile: partition@fd0000 {
+                               reg = <0xfd0000 0x10000>;
+                               label = "romfile";
+                               read-only;
+                       };
+
+                       partition@fe0000 {
+                               reg = <0xfe0000 0x10000>;
+                               label = "rom";
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               reg = <0xff0000 0x10000>;
+                               label = "radio";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+       status = "okay";
+       vbus-supply = <&usb_vbus>;
+};
index 331f08e..dc65dbf 100644 (file)
@@ -1,32 +1,29 @@
 /dts-v1/;
 
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+#include "VR200.dtsi"
 
 / {
        compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
        model = "TP-LINK Archer VR200v";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200";
+               bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
        };
 
        aliases {
                led-boot = &power;
                led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
 
                led-dsl = &dsl;
                led-internet = &internet;
+               led-wifi = &wlan5g;
+
                led-usb = &led_usb;
                led-usb2 = &led_usb;
        };
 
-       memory@0 {
-               reg = <0x0 0x7f00000>;
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -63,6 +60,7 @@
                power: power {
                        label = "vr200v:blue:power";
                        gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
                };
                dsl: dsl {
                        label = "vr200v:blue:dsl";
@@ -84,7 +82,7 @@
                        label = "vr200v:blue:wlan";
                        gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                };
-               wlan5g {
+               wlan5g: wifi {
                        label = "vr200v:blue:wlan5g";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
                        label = "vr200v:blue:phone";
                        gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
-       };
-
-       usb_vbus: regulator-usb-vbus {
-               compatible = "regulator-fixed";
-
-               regulator-name = "USB_VBUS";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&eth0 {
-       lan: interface@0 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0>;
-               mtd-mac-address = <&romfile 0xf100>;
-               lantiq,switch;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy0>;
-                       // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-               };
-               ethernet@5 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <5>;
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy5>;
-               };
-               ethernet@2 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <2>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy11>;
-               };
-               ethernet@3 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <4>;
-                       phy-mode = "gmii";
-                       phy-handle = <&phy13>;
-               };
-       };
-
-       mdio@0 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "lantiq,xrx200-mdio";
-               reg = <0>;
-
-               phy0: ethernet-phy@0 {
-                       reg = <0x0>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy5: ethernet-phy@5 {
-                       reg = <0x5>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy11: ethernet-phy@11 {
-                       reg = <0x11>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-               phy13: ethernet-phy@13 {
-                       reg = <0x13>;
-                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-               };
-       };
-};
-
-&gphy0 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
-       lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&state_default>;
-
-       state_default: pinmux {
-               mdio {
-                       lantiq,groups = "mdio";
-                       lantiq,function = "mdio";
-               };
-               gphy-leds {
-                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                       lantiq,function = "gphy";
-                       lantiq,pull = <2>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               phy-rst {
-                       lantiq,pins = "io42";
-                       lantiq,pull = <0>;
-                       lantiq,open-drain = <0>;
-                       lantiq,output = <1>;
-               };
-               pcie-rst {
-                       lantiq,pins = "io38";
-                       lantiq,pull = <0>;
-                       lantiq,output = <1>;
-               };
-       };
-       pins_spi_default: pins_spi_default {
-               spi_in {
-                       lantiq,groups = "spi_di";
-                       lantiq,function = "spi";
-               };
-               spi_out {
-                       lantiq,groups = "spi_do", "spi_clk",
-                               "spi_cs4";
-                       lantiq,function = "spi";
-                       lantiq,output = <1>;
-               };
-       };
-};
-
-&pci0 {
-       status = "okay";
-       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pins_spi_default>;
-
-       m25p80@4 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <4 0>;
-               spi-max-frequency = <33250000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0xf90000>;
-                               label = "firmware";
-                       };
-
-                       partition@fb0000 {
-                               reg = <0xfb0000 0x10000>;
-                               label = "radioDECT";
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               reg = <0xfc0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       romfile: partition@fd0000 {
-                               reg = <0xfd0000 0x10000>;
-                               label = "romfile";
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               reg = <0xfe0000 0x10000>;
-                               label = "rom";
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               reg = <0xff0000 0x10000>;
-                               label = "radio";
-                               read-only;
-                       };
-               };
-       };
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb_phy1 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-       vbus-supply = <&usb_vbus>;
+       };      
 };
 
-&usb1 {
+&vmmc {
        status = "okay";
-       vbus-supply = <&usb_vbus>;
+       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
 };
index e2dfc08..bec9eaf 100644 (file)
@@ -37,16 +37,28 @@ define Device/tplink_tdw8980
 endef
 TARGET_DEVICES += tplink_tdw8980
 
+define Device/tplink_vr200
+  $(Device/lantiqTpLink)
+  DEVICE_DTS := VR200
+  TPLINK_FLASHLAYOUT := 16Mltq
+  TPLINK_HWID := 0x63e64801
+  TPLINK_HWREV := 0x53
+  IMAGE_SIZE := 15808k
+  DEVICE_TITLE := TP-LINK Archer VR200
+  DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  SUPPORTED_DEVICES += VR200
+endef
+TARGET_DEVICES += tplink_vr200
+
 define Device/tplink_vr200v
   $(Device/lantiqTpLink)
   DEVICE_DTS := VR200v
-  TPLINK_BOARD_ID := ArcherVR200V
   TPLINK_FLASHLAYOUT := 16Mltq
   TPLINK_HWID := 0x73b70801
   TPLINK_HWREV := 0x2f
   IMAGE_SIZE := 15808k
   DEVICE_TITLE := TP-LINK Archer VR200v
-  DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc
   SUPPORTED_DEVICES += VR200v
 endef
 TARGET_DEVICES += tplink_vr200v