--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 7 Jun 2015 13:53:35 +0200
+Subject: [PATCH] ath9k: force rx_clear when disabling rx
+
+This makes stopping Rx more reliable and should reduce the frequency of
+Rx related DMA stop warnings
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/mac.c
++++ b/drivers/net/wireless/ath/ath9k/mac.c
+@@ -677,13 +677,15 @@ void ath9k_hw_startpcureceive(struct ath
+
+ ath9k_ani_reset(ah, is_scanning);
+
+- REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
++ REG_CLR_BIT(ah, AR_DIAG_SW,
++ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+ }
+ EXPORT_SYMBOL(ath9k_hw_startpcureceive);
+
+ void ath9k_hw_abortpcurecv(struct ath_hw *ah)
+ {
+- REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
++ REG_SET_BIT(ah, AR_DIAG_SW,
++ AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT | AR_DIAG_FORCE_RX_CLEAR);
+
+ ath9k_hw_disable_mib_counters(ah);
+ }
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Thu, 2 Jul 2015 15:20:56 +0200
+Subject: [PATCH] ath9k: limit retries for powersave response frames
+
+In some cases, the channel might be busy enough that an ath9k AP's
+response to PS-Poll frames might be too slow and the station has already
+gone to sleep. To avoid wasting too much airtime on this, limit the
+number of retries on such frames and ensure that no sample rate gets
+used.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -136,10 +136,25 @@ static void ath_send_bar(struct ath_atx_
+ }
+
+ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+- struct ath_buf *bf)
++ struct ath_buf *bf, bool ps)
+ {
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
++
++ if (ps) {
++ /* Clear the first rate to avoid using a sample rate for PS frames */
++ info->control.rates[0].idx = -1;
++ info->control.rates[0].count = 0;
++ }
++
+ ieee80211_get_tx_rates(vif, sta, bf->bf_mpdu, bf->rates,
+ ARRAY_SIZE(bf->rates));
++ if (!ps)
++ return;
++
++ if (bf->rates[0].count > 2)
++ bf->rates[0].count = 2;
++
++ bf->rates[1].idx = -1;
+ }
+
+ static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+@@ -1419,7 +1434,7 @@ ath_tx_form_burst(struct ath_softc *sc,
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ break;
+
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ } while (1);
+ }
+
+@@ -1450,7 +1465,7 @@ static bool ath_tx_sched_aggr(struct ath
+ return false;
+ }
+
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false);
+ if (aggr)
+ last = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf,
+ tid_q, &aggr_len);
+@@ -1632,7 +1647,7 @@ void ath9k_release_buffered_frames(struc
+
+ __skb_unlink(bf->bf_mpdu, tid_q);
+ list_add_tail(&bf->list, &bf_q);
+- ath_set_rates(tid->an->vif, tid->an->sta, bf);
++ ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
+ if (bf_isampdu(bf)) {
+ ath_tx_addto_baw(sc, tid, bf);
+ bf->bf_state.bf_type &= ~BUF_AGGR;
+@@ -2278,7 +2293,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ struct ath_txq *txq = txctl->txq;
+ struct ath_atx_tid *tid = NULL;
+ struct ath_buf *bf;
+- bool queue, skip_uapsd = false, ps_resp;
++ bool queue, ps_resp;
+ int q, ret;
+
+ if (vif)
+@@ -2325,13 +2340,13 @@ int ath_tx_start(struct ieee80211_hw *hw
+ if (!txctl->an)
+ txctl->an = &avp->mcast_node;
+ queue = true;
+- skip_uapsd = true;
++ ps_resp = false;
+ }
+
+ if (txctl->an && queue)
+ tid = ath_get_skb_tid(sc, txctl->an, skb);
+
+- if (!skip_uapsd && ps_resp) {
++ if (ps_resp) {
+ ath_txq_unlock(sc, txq);
+ txq = sc->tx.uapsdq;
+ ath_txq_lock(sc, txq);
+@@ -2369,7 +2384,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+ if (txctl->paprd)
+ bf->bf_state.bfs_paprd_timestamp = jiffies;
+
+- ath_set_rates(vif, sta, bf);
++ ath_set_rates(vif, sta, bf, ps_resp);
+ ath_tx_send_normal(sc, txq, tid, skb);
+
+ out:
+@@ -2408,7 +2423,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
+ break;
+
+ bf->bf_lastbf = bf;
+- ath_set_rates(vif, NULL, bf);
++ ath_set_rates(vif, NULL, bf, false);
+ ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
+ duration += info.rates[0].PktDuration;
+ if (bf_tail)
+@@ -2911,7 +2926,7 @@ int ath9k_tx99_send(struct ath_softc *sc
+ return -EINVAL;
+ }
+
+- ath_set_rates(sc->tx99_vif, NULL, bf);
++ ath_set_rates(sc->tx99_vif, NULL, bf, false);
+
+ ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
+ ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
--- /dev/null
+From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+Date: Tue, 20 Oct 2015 14:19:26 +0200
+Subject: [PATCH] ath9k: fix phyerror codes
+
+Some of the ath9k_phyerr enums were wrong from the
+beginning (and even before). Most of the time the
+codes were used for counters to be displayed over
+debugfs, which made this a non-functional issue.
+
+Some (e.g. ATH9K_PHYERR_FALSE_RADAR_EXT) are used
+for radar detection and require the correct code
+to work as intended.
+
+This patch includes:
+a) fixes
+ ATH9K_PHYERR_FALSE_RADAR_EXT: 24 => 36
+ ATH9K_PHYERR_CCK_LENGTH_ILLEGAL: 32 => 28
+ ATH9K_PHYERR_CCK_POWER_DROP: 33 => 29
+ ATH9K_PHYERR_HT_CRC_ERROR: 34 => 32
+ ATH9K_PHYERR_HT_LENGTH_ILLEGAL: 35 => 33
+ ATH9K_PHYERR_HT_RATE_ILLEGAL: 36 => 34
+
+b) extensions
+ ATH9K_PHYERR_CCK_BLOCKER = 24
+ ATH9K_PHYERR_HT_ZLF = 35
+ ATH9K_PHYERR_GREEN_FIELD = 37
+
+Aside from the correction and completion made in
+the enum, the patch also extends the display of
+the related counters in the debugfs.
+
+Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/common-debug.c
++++ b/drivers/net/wireless/ath/ath9k/common-debug.c
+@@ -207,6 +207,7 @@ static ssize_t read_file_phy_err(struct
+ PHY_ERR("RADAR ERR", ATH9K_PHYERR_RADAR);
+ PHY_ERR("SERVICE ERR", ATH9K_PHYERR_SERVICE);
+ PHY_ERR("TOR ERR", ATH9K_PHYERR_TOR);
++
+ PHY_ERR("OFDM-TIMING ERR", ATH9K_PHYERR_OFDM_TIMING);
+ PHY_ERR("OFDM-SIGNAL-PARITY ERR", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
+ PHY_ERR("OFDM-RATE ERR", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
+@@ -214,17 +215,24 @@ static ssize_t read_file_phy_err(struct
+ PHY_ERR("OFDM-POWER-DROP ERR", ATH9K_PHYERR_OFDM_POWER_DROP);
+ PHY_ERR("OFDM-SERVICE ERR", ATH9K_PHYERR_OFDM_SERVICE);
+ PHY_ERR("OFDM-RESTART ERR", ATH9K_PHYERR_OFDM_RESTART);
+- PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
++
++ PHY_ERR("CCK-BLOCKER ERR", ATH9K_PHYERR_CCK_BLOCKER);
+ PHY_ERR("CCK-TIMING ERR", ATH9K_PHYERR_CCK_TIMING);
+ PHY_ERR("CCK-HEADER-CRC ERR", ATH9K_PHYERR_CCK_HEADER_CRC);
+ PHY_ERR("CCK-RATE ERR", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
+- PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
+- PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
+ PHY_ERR("CCK-LENGTH ERR", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
+ PHY_ERR("CCK-POWER-DROP ERR", ATH9K_PHYERR_CCK_POWER_DROP);
++ PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
++ PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
++
+ PHY_ERR("HT-CRC ERR", ATH9K_PHYERR_HT_CRC_ERROR);
+ PHY_ERR("HT-LENGTH ERR", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
+ PHY_ERR("HT-RATE ERR", ATH9K_PHYERR_HT_RATE_ILLEGAL);
++ PHY_ERR("HT-ZLF ERR", ATH9K_PHYERR_HT_ZLF);
++
++ PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
++ PHY_ERR("GREEN-FIELD ERR", ATH9K_PHYERR_GREEN_FIELD);
++ PHY_ERR("SPECTRAL ERR", ATH9K_PHYERR_SPECTRAL);
+
+ if (len > size)
+ len = size;
+--- a/drivers/net/wireless/ath/ath9k/mac.h
++++ b/drivers/net/wireless/ath/ath9k/mac.h
+@@ -209,21 +209,25 @@ enum ath9k_phyerr {
+ ATH9K_PHYERR_OFDM_POWER_DROP = 21,
+ ATH9K_PHYERR_OFDM_SERVICE = 22,
+ ATH9K_PHYERR_OFDM_RESTART = 23,
+- ATH9K_PHYERR_FALSE_RADAR_EXT = 24,
+
++ ATH9K_PHYERR_CCK_BLOCKER = 24,
+ ATH9K_PHYERR_CCK_TIMING = 25,
+ ATH9K_PHYERR_CCK_HEADER_CRC = 26,
+ ATH9K_PHYERR_CCK_RATE_ILLEGAL = 27,
++ ATH9K_PHYERR_CCK_LENGTH_ILLEGAL = 28,
++ ATH9K_PHYERR_CCK_POWER_DROP = 29,
+ ATH9K_PHYERR_CCK_SERVICE = 30,
+ ATH9K_PHYERR_CCK_RESTART = 31,
+- ATH9K_PHYERR_CCK_LENGTH_ILLEGAL = 32,
+- ATH9K_PHYERR_CCK_POWER_DROP = 33,
+
+- ATH9K_PHYERR_HT_CRC_ERROR = 34,
+- ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 35,
+- ATH9K_PHYERR_HT_RATE_ILLEGAL = 36,
++ ATH9K_PHYERR_HT_CRC_ERROR = 32,
++ ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 33,
++ ATH9K_PHYERR_HT_RATE_ILLEGAL = 34,
++ ATH9K_PHYERR_HT_ZLF = 35,
++
++ ATH9K_PHYERR_FALSE_RADAR_EXT = 36,
++ ATH9K_PHYERR_GREEN_FIELD = 37,
++ ATH9K_PHYERR_SPECTRAL = 38,
+
+- ATH9K_PHYERR_SPECTRAL = 38,
+ ATH9K_PHYERR_MAX = 39,
+ };
+
--- /dev/null
+From: Maharaja <c_mkenna@qti.qualcomm.com>
+Date: Wed, 21 Oct 2015 11:49:18 +0300
+Subject: [PATCH] ath10k: enable adaptive CCA
+
+European Union has made it mandatory that all devices working in 2.4 GHz
+has to adhere to the ETSI specification (ETSI EN 300 328 V1.9.1)
+beginnig this year. The standard basically speaks about interferences
+in 2.4Ghz band.
+For example, when 802.11 device detects interference, TX must be stopped
+as long as interference is present.
+
+Adaptive CCA is a feature, when enabled the device learns from the
+environment and configures CCA levels adaptively. This will improve
+detecting interferences and the device can stop trasmissions till the
+interference is present eventually leading to good performances in
+varying interference conditions.
+
+The patch includes code for enabling adaptive CCA for 10.2.4 firmware on
+QCA988X.
+
+Signed-off-by: Maharaja <c_mkenna@qti.qualcomm.com>
+Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/core.c
++++ b/drivers/net/wireless/ath/ath10k/core.c
+@@ -151,6 +151,7 @@ static const char *const ath10k_core_fw_
+ [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
+ [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
+ [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
++ [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca",
+ };
+
+ static unsigned int ath10k_core_get_fw_feature_str(char *buf,
+--- a/drivers/net/wireless/ath/ath10k/core.h
++++ b/drivers/net/wireless/ath/ath10k/core.h
+@@ -497,6 +497,9 @@ enum ath10k_fw_features {
+ */
+ ATH10K_FW_FEATURE_RAW_MODE_SUPPORT = 10,
+
++ /* Firmware Supports Adaptive CCA*/
++ ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA = 11,
++
+ /* keep last */
+ ATH10K_FW_FEATURE_COUNT,
+ };
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -3905,6 +3905,18 @@ static int ath10k_start(struct ieee80211
+ goto err_core_stop;
+ }
+
++ if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA,
++ ar->fw_features)) {
++ ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1,
++ WMI_CCA_DETECT_LEVEL_AUTO,
++ WMI_CCA_DETECT_MARGIN_AUTO);
++ if (ret) {
++ ath10k_warn(ar, "failed to enable adaptive cca: %d\n",
++ ret);
++ goto err_core_stop;
++ }
++ }
++
+ ret = ath10k_wmi_pdev_set_param(ar,
+ ar->wmi.pdev_param->ani_enable, 1);
+ if (ret) {
+--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
++++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
+@@ -182,6 +182,10 @@ struct wmi_ops {
+ void (*fw_stats_fill)(struct ath10k *ar,
+ struct ath10k_fw_stats *fw_stats,
+ char *buf);
++ struct sk_buff *(*gen_pdev_enable_adaptive_cca)(struct ath10k *ar,
++ u8 enable,
++ u32 detect_level,
++ u32 detect_margin);
+ };
+
+ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
+@@ -1302,4 +1306,25 @@ ath10k_wmi_fw_stats_fill(struct ath10k *
+ ar->wmi.ops->fw_stats_fill(ar, fw_stats, buf);
+ return 0;
+ }
++
++static inline int
++ath10k_wmi_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
++ u32 detect_level, u32 detect_margin)
++{
++ struct sk_buff *skb;
++
++ if (!ar->wmi.ops->gen_pdev_enable_adaptive_cca)
++ return -EOPNOTSUPP;
++
++ skb = ar->wmi.ops->gen_pdev_enable_adaptive_cca(ar, enable,
++ detect_level,
++ detect_margin);
++
++ if (IS_ERR(skb))
++ return PTR_ERR(skb);
++
++ return ath10k_wmi_cmd_send(ar, skb,
++ ar->wmi.cmd->pdev_enable_adaptive_cca_cmdid);
++}
++
+ #endif
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -148,6 +148,7 @@ static struct wmi_cmd_map wmi_cmd_map =
+ .gpio_config_cmdid = WMI_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
++ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
+@@ -313,6 +314,7 @@ static struct wmi_cmd_map wmi_10x_cmd_ma
+ .gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
++ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
+@@ -477,6 +479,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd
+ .gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
++ .pdev_enable_adaptive_cca_cmdid = WMI_10_2_SET_CCA_PARAMS,
+ .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
+@@ -1407,6 +1410,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_m
+ .gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
+ .gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
++ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
+ .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
+ .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
+@@ -6996,6 +7000,28 @@ unlock:
+ buf[len] = 0;
+ }
+
++static struct sk_buff *
++ath10k_wmi_op_gen_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
++ u32 detect_level, u32 detect_margin)
++{
++ struct wmi_pdev_set_adaptive_cca_params *cmd;
++ struct sk_buff *skb;
++
++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
++ if (!skb)
++ return ERR_PTR(-ENOMEM);
++
++ cmd = (struct wmi_pdev_set_adaptive_cca_params *)skb->data;
++ cmd->enable = __cpu_to_le32(enable);
++ cmd->cca_detect_level = __cpu_to_le32(detect_level);
++ cmd->cca_detect_margin = __cpu_to_le32(detect_margin);
++
++ ath10k_dbg(ar, ATH10K_DBG_WMI,
++ "wmi pdev set adaptive cca params enable:%d detection level:%d detection margin:%d\n",
++ enable, detect_level, detect_margin);
++ return skb;
++}
++
+ static const struct wmi_ops wmi_ops = {
+ .rx = ath10k_wmi_op_rx,
+ .map_svc = wmi_main_svc_map,
+@@ -7059,6 +7085,7 @@ static const struct wmi_ops wmi_ops = {
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+ /* .gen_adaptive_qcs not implemented */
++ /* .gen_pdev_enable_adaptive_cca not implemented */
+ };
+
+ static const struct wmi_ops wmi_10_1_ops = {
+@@ -7125,6 +7152,7 @@ static const struct wmi_ops wmi_10_1_ops
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+ /* .gen_adaptive_qcs not implemented */
++ /* .gen_pdev_enable_adaptive_cca not implemented */
+ };
+
+ static const struct wmi_ops wmi_10_2_ops = {
+@@ -7188,6 +7216,7 @@ static const struct wmi_ops wmi_10_2_ops
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
+ .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
++ /* .gen_pdev_enable_adaptive_cca not implemented */
+ };
+
+ static const struct wmi_ops wmi_10_2_4_ops = {
+@@ -7251,6 +7280,8 @@ static const struct wmi_ops wmi_10_2_4_o
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
+ .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
+ .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
++ .gen_pdev_enable_adaptive_cca =
++ ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
+ /* .gen_bcn_tmpl not implemented */
+ /* .gen_prb_tmpl not implemented */
+ /* .gen_p2p_go_bcn_ie not implemented */
+--- a/drivers/net/wireless/ath/ath10k/wmi.h
++++ b/drivers/net/wireless/ath/ath10k/wmi.h
+@@ -772,6 +772,7 @@ struct wmi_cmd_map {
+ u32 mu_cal_start_cmdid;
+ u32 set_cca_params_cmdid;
+ u32 pdev_bss_chan_info_request_cmdid;
++ u32 pdev_enable_adaptive_cca_cmdid;
+ };
+
+ /*
+@@ -1381,6 +1382,9 @@ enum wmi_10_2_cmd_id {
+ WMI_10_2_VDEV_ATF_REQUEST_CMDID,
+ WMI_10_2_PEER_ATF_REQUEST_CMDID,
+ WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
++ WMI_10_2_MU_CAL_START_CMDID,
++ WMI_10_2_SET_LTEU_CONFIG_CMDID,
++ WMI_10_2_SET_CCA_PARAMS,
+ WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
+ };
+
+@@ -6094,6 +6098,15 @@ enum wmi_txbf_conf {
+ WMI_TXBF_CONF_AFTER_ASSOC,
+ };
+
++#define WMI_CCA_DETECT_LEVEL_AUTO 0
++#define WMI_CCA_DETECT_MARGIN_AUTO 0
++
++struct wmi_pdev_set_adaptive_cca_params {
++ __le32 enable;
++ __le32 cca_detect_level;
++ __le32 cca_detect_margin;
++} __packed;
++
+ struct ath10k;
+ struct ath10k_vif;
+ struct ath10k_fw_stats_pdev;
--- /dev/null
+From: Alan Liu <alanliu@qca.qualcomm.com>
+Date: Wed, 28 Oct 2015 21:38:32 +0200
+Subject: [PATCH] ath10k: add FW API support to test mode
+
+Add WMI-TLV and FW API support in ath10k testmode.
+Ath10k can get right wmi command format from UTF image
+to communicate UTF firmware.
+
+Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/core.c
++++ b/drivers/net/wireless/ath/ath10k/core.c
+@@ -569,8 +569,8 @@ static int ath10k_download_fw(struct ath
+ }
+ break;
+ case ATH10K_FIRMWARE_MODE_UTF:
+- data = ar->testmode.utf->data;
+- data_len = ar->testmode.utf->size;
++ data = ar->testmode.utf_firmware_data;
++ data_len = ar->testmode.utf_firmware_len;
+ mode_name = "utf";
+ break;
+ default:
+--- a/drivers/net/wireless/ath/ath10k/core.h
++++ b/drivers/net/wireless/ath/ath10k/core.h
+@@ -817,9 +817,12 @@ struct ath10k {
+ struct {
+ /* protected by conf_mutex */
+ const struct firmware *utf;
++ char utf_version[32];
++ const void *utf_firmware_data;
++ size_t utf_firmware_len;
+ DECLARE_BITMAP(orig_fw_features, ATH10K_FW_FEATURE_COUNT);
+ enum ath10k_fw_wmi_op_version orig_wmi_op_version;
+-
++ enum ath10k_fw_wmi_op_version op_version;
+ /* protected by data_lock */
+ bool utf_monitor;
+ } testmode;
+--- a/drivers/net/wireless/ath/ath10k/hw.h
++++ b/drivers/net/wireless/ath/ath10k/hw.h
+@@ -94,6 +94,7 @@ enum qca6174_chip_id_rev {
+ #define ATH10K_FW_API5_FILE "firmware-5.bin"
+
+ #define ATH10K_FW_UTF_FILE "utf.bin"
++#define ATH10K_FW_UTF_API2_FILE "utf-2.bin"
+
+ /* includes also the null byte */
+ #define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
+--- a/drivers/net/wireless/ath/ath10k/testmode.c
++++ b/drivers/net/wireless/ath/ath10k/testmode.c
+@@ -139,11 +139,181 @@ static int ath10k_tm_cmd_get_version(str
+ return cfg80211_testmode_reply(skb);
+ }
+
+-static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
++static int ath10k_tm_fetch_utf_firmware_api_2(struct ath10k *ar)
++{
++ size_t len, magic_len, ie_len;
++ struct ath10k_fw_ie *hdr;
++ char filename[100];
++ __le32 *version;
++ const u8 *data;
++ int ie_id, ret;
++
++ snprintf(filename, sizeof(filename), "%s/%s",
++ ar->hw_params.fw.dir, ATH10K_FW_UTF_API2_FILE);
++
++ /* load utf firmware image */
++ ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
++ if (ret) {
++ ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
++ filename, ret);
++ return ret;
++ }
++
++ data = ar->testmode.utf->data;
++ len = ar->testmode.utf->size;
++
++ /* FIXME: call release_firmware() in error cases */
++
++ /* magic also includes the null byte, check that as well */
++ magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;
++
++ if (len < magic_len) {
++ ath10k_err(ar, "utf firmware file is too small to contain magic\n");
++ ret = -EINVAL;
++ goto err;
++ }
++
++ if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) {
++ ath10k_err(ar, "invalid firmware magic\n");
++ ret = -EINVAL;
++ goto err;
++ }
++
++ /* jump over the padding */
++ magic_len = ALIGN(magic_len, 4);
++
++ len -= magic_len;
++ data += magic_len;
++
++ /* loop elements */
++ while (len > sizeof(struct ath10k_fw_ie)) {
++ hdr = (struct ath10k_fw_ie *)data;
++
++ ie_id = le32_to_cpu(hdr->id);
++ ie_len = le32_to_cpu(hdr->len);
++
++ len -= sizeof(*hdr);
++ data += sizeof(*hdr);
++
++ if (len < ie_len) {
++ ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n",
++ ie_id, len, ie_len);
++ ret = -EINVAL;
++ goto err;
++ }
++
++ switch (ie_id) {
++ case ATH10K_FW_IE_FW_VERSION:
++ if (ie_len > sizeof(ar->testmode.utf_version) - 1)
++ break;
++
++ memcpy(ar->testmode.utf_version, data, ie_len);
++ ar->testmode.utf_version[ie_len] = '\0';
++
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
++ "testmode found fw utf version %s\n",
++ ar->testmode.utf_version);
++ break;
++ case ATH10K_FW_IE_TIMESTAMP:
++ /* ignore timestamp, but don't warn about it either */
++ break;
++ case ATH10K_FW_IE_FW_IMAGE:
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
++ "testmode found fw image ie (%zd B)\n",
++ ie_len);
++
++ ar->testmode.utf_firmware_data = data;
++ ar->testmode.utf_firmware_len = ie_len;
++ break;
++ case ATH10K_FW_IE_WMI_OP_VERSION:
++ if (ie_len != sizeof(u32))
++ break;
++ version = (__le32 *)data;
++ ar->testmode.op_version = le32_to_cpup(version);
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode found fw ie wmi op version %d\n",
++ ar->testmode.op_version);
++ break;
++ default:
++ ath10k_warn(ar, "Unknown testmode FW IE: %u\n",
++ le32_to_cpu(hdr->id));
++ break;
++ }
++ /* jump over the padding */
++ ie_len = ALIGN(ie_len, 4);
++
++ len -= ie_len;
++ data += ie_len;
++ }
++
++ if (!ar->testmode.utf_firmware_data || !ar->testmode.utf_firmware_len) {
++ ath10k_err(ar, "No ATH10K_FW_IE_FW_IMAGE found\n");
++ ret = -EINVAL;
++ goto err;
++ }
++
++ return 0;
++
++err:
++ release_firmware(ar->testmode.utf);
++
++ return ret;
++}
++
++static int ath10k_tm_fetch_utf_firmware_api_1(struct ath10k *ar)
+ {
+ char filename[100];
+ int ret;
+
++ snprintf(filename, sizeof(filename), "%s/%s",
++ ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
++
++ /* load utf firmware image */
++ ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
++ if (ret) {
++ ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
++ filename, ret);
++ return ret;
++ }
++
++ /* We didn't find FW UTF API 1 ("utf.bin") does not advertise
++ * firmware features. Do an ugly hack where we force the firmware
++ * features to match with 10.1 branch so that wmi.c will use the
++ * correct WMI interface.
++ */
++
++ ar->testmode.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
++ ar->testmode.utf_firmware_data = ar->testmode.utf->data;
++ ar->testmode.utf_firmware_len = ar->testmode.utf->size;
++
++ return 0;
++}
++
++static int ath10k_tm_fetch_firmware(struct ath10k *ar)
++{
++ int ret;
++
++ ret = ath10k_tm_fetch_utf_firmware_api_2(ar);
++ if (ret == 0) {
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using fw utf api 2");
++ return 0;
++ }
++
++ ret = ath10k_tm_fetch_utf_firmware_api_1(ar);
++ if (ret) {
++ ath10k_err(ar, "failed to fetch utf firmware binary: %d", ret);
++ return ret;
++ }
++
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using utf api 1");
++
++ return 0;
++}
++
++static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
++{
++ const char *ver;
++ int ret;
++
+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode cmd utf start\n");
+
+ mutex_lock(&ar->conf_mutex);
+@@ -165,36 +335,27 @@ static int ath10k_tm_cmd_utf_start(struc
+ goto err;
+ }
+
+- snprintf(filename, sizeof(filename), "%s/%s",
+- ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
+-
+- /* load utf firmware image */
+- ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
++ ret = ath10k_tm_fetch_firmware(ar);
+ if (ret) {
+- ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
+- filename, ret);
++ ath10k_err(ar, "failed to fetch UTF firmware: %d", ret);
+ goto err;
+ }
+
+ spin_lock_bh(&ar->data_lock);
+-
+ ar->testmode.utf_monitor = true;
+-
+ spin_unlock_bh(&ar->data_lock);
+-
+ BUILD_BUG_ON(sizeof(ar->fw_features) !=
+ sizeof(ar->testmode.orig_fw_features));
+
+ memcpy(ar->testmode.orig_fw_features, ar->fw_features,
+ sizeof(ar->fw_features));
+ ar->testmode.orig_wmi_op_version = ar->wmi.op_version;
+-
+- /* utf.bin firmware image does not advertise firmware features. Do
+- * an ugly hack where we force the firmware features so that wmi.c
+- * will use the correct WMI interface.
+- */
+ memset(ar->fw_features, 0, sizeof(ar->fw_features));
+- ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
++
++ ar->wmi.op_version = ar->testmode.op_version;
++
++ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode wmi version %d\n",
++ ar->wmi.op_version);
+
+ ret = ath10k_hif_power_up(ar);
+ if (ret) {
+@@ -212,7 +373,12 @@ static int ath10k_tm_cmd_utf_start(struc
+
+ ar->state = ATH10K_STATE_UTF;
+
+- ath10k_info(ar, "UTF firmware started\n");
++ if (strlen(ar->testmode.utf_version) > 0)
++ ver = ar->testmode.utf_version;
++ else
++ ver = "API 1";
++
++ ath10k_info(ar, "UTF firmware %s started\n", ver);
+
+ mutex_unlock(&ar->conf_mutex);
+
+--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
++++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+@@ -23,6 +23,7 @@
+ #include "wmi-ops.h"
+ #include "wmi-tlv.h"
+ #include "p2p.h"
++#include "testmode.h"
+
+ /***************/
+ /* TLV helpers */
+@@ -419,6 +420,7 @@ static void ath10k_wmi_tlv_op_rx(struct
+ {
+ struct wmi_cmd_hdr *cmd_hdr;
+ enum wmi_tlv_event_id id;
++ bool consumed;
+
+ cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
+ id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
+@@ -428,6 +430,18 @@ static void ath10k_wmi_tlv_op_rx(struct
+
+ trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
+
++ consumed = ath10k_tm_event_wmi(ar, id, skb);
++
++ /* Ready event must be handled normally also in UTF mode so that we
++ * know the UTF firmware has booted, others we are just bypass WMI
++ * events to testmode.
++ */
++ if (consumed && id != WMI_TLV_READY_EVENTID) {
++ ath10k_dbg(ar, ATH10K_DBG_WMI,
++ "wmi tlv testmode consumed 0x%x\n", id);
++ goto out;
++ }
++
+ switch (id) {
+ case WMI_TLV_MGMT_RX_EVENTID:
+ ath10k_wmi_event_mgmt_rx(ar, skb);
--- /dev/null
+From: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
+Date: Wed, 28 Oct 2015 21:38:33 +0200
+Subject: [PATCH] ath10k: add fw_stats support to 10.4 firmware
+
+This patch adds support for getting firmware debug stats in 10.4 fw.
+
+Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
+Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/core.h
++++ b/drivers/net/wireless/ath/ath10k/core.h
+@@ -214,6 +214,7 @@ struct ath10k_fw_stats_pdev {
+ s32 hw_queued;
+ s32 hw_reaped;
+ s32 underrun;
++ u32 hw_paused;
+ s32 tx_abort;
+ s32 mpdus_requed;
+ u32 tx_ko;
+@@ -226,6 +227,16 @@ struct ath10k_fw_stats_pdev {
+ u32 pdev_resets;
+ u32 phy_underrun;
+ u32 txop_ovf;
++ u32 seq_posted;
++ u32 seq_failed_queueing;
++ u32 seq_completed;
++ u32 seq_restarted;
++ u32 mu_seq_posted;
++ u32 mpdus_sw_flush;
++ u32 mpdus_hw_filter;
++ u32 mpdus_truncated;
++ u32 mpdus_ack_failed;
++ u32 mpdus_expired;
+
+ /* PDEV RX stats */
+ s32 mid_ppdu_route_change;
+@@ -242,6 +253,7 @@ struct ath10k_fw_stats_pdev {
+ s32 phy_errs;
+ s32 phy_err_drop;
+ s32 mpdu_errs;
++ s32 rx_ovfl_errs;
+ };
+
+ struct ath10k_fw_stats {
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -2479,6 +2479,47 @@ void ath10k_wmi_pull_pdev_stats_tx(const
+ dst->txop_ovf = __le32_to_cpu(src->txop_ovf);
+ }
+
++static void
++ath10k_wmi_10_4_pull_pdev_stats_tx(const struct wmi_10_4_pdev_stats_tx *src,
++ struct ath10k_fw_stats_pdev *dst)
++{
++ dst->comp_queued = __le32_to_cpu(src->comp_queued);
++ dst->comp_delivered = __le32_to_cpu(src->comp_delivered);
++ dst->msdu_enqued = __le32_to_cpu(src->msdu_enqued);
++ dst->mpdu_enqued = __le32_to_cpu(src->mpdu_enqued);
++ dst->wmm_drop = __le32_to_cpu(src->wmm_drop);
++ dst->local_enqued = __le32_to_cpu(src->local_enqued);
++ dst->local_freed = __le32_to_cpu(src->local_freed);
++ dst->hw_queued = __le32_to_cpu(src->hw_queued);
++ dst->hw_reaped = __le32_to_cpu(src->hw_reaped);
++ dst->underrun = __le32_to_cpu(src->underrun);
++ dst->tx_abort = __le32_to_cpu(src->tx_abort);
++ dst->mpdus_requed = __le32_to_cpu(src->mpdus_requed);
++ dst->tx_ko = __le32_to_cpu(src->tx_ko);
++ dst->data_rc = __le32_to_cpu(src->data_rc);
++ dst->self_triggers = __le32_to_cpu(src->self_triggers);
++ dst->sw_retry_failure = __le32_to_cpu(src->sw_retry_failure);
++ dst->illgl_rate_phy_err = __le32_to_cpu(src->illgl_rate_phy_err);
++ dst->pdev_cont_xretry = __le32_to_cpu(src->pdev_cont_xretry);
++ dst->pdev_tx_timeout = __le32_to_cpu(src->pdev_tx_timeout);
++ dst->pdev_resets = __le32_to_cpu(src->pdev_resets);
++ dst->phy_underrun = __le32_to_cpu(src->phy_underrun);
++ dst->txop_ovf = __le32_to_cpu(src->txop_ovf);
++ dst->hw_paused = __le32_to_cpu(src->hw_paused);
++ dst->seq_posted = __le32_to_cpu(src->seq_posted);
++ dst->seq_failed_queueing =
++ __le32_to_cpu(src->seq_failed_queueing);
++ dst->seq_completed = __le32_to_cpu(src->seq_completed);
++ dst->seq_restarted = __le32_to_cpu(src->seq_restarted);
++ dst->mu_seq_posted = __le32_to_cpu(src->mu_seq_posted);
++ dst->mpdus_sw_flush = __le32_to_cpu(src->mpdus_sw_flush);
++ dst->mpdus_hw_filter = __le32_to_cpu(src->mpdus_hw_filter);
++ dst->mpdus_truncated = __le32_to_cpu(src->mpdus_truncated);
++ dst->mpdus_ack_failed = __le32_to_cpu(src->mpdus_ack_failed);
++ dst->mpdus_hw_filter = __le32_to_cpu(src->mpdus_hw_filter);
++ dst->mpdus_expired = __le32_to_cpu(src->mpdus_expired);
++}
++
+ void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
+ struct ath10k_fw_stats_pdev *dst)
+ {
+@@ -2789,6 +2830,86 @@ static int ath10k_wmi_10_2_4_op_pull_fw_
+ return 0;
+ }
+
++static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
++ struct sk_buff *skb,
++ struct ath10k_fw_stats *stats)
++{
++ const struct wmi_10_2_stats_event *ev = (void *)skb->data;
++ u32 num_pdev_stats;
++ u32 num_pdev_ext_stats;
++ u32 num_vdev_stats;
++ u32 num_peer_stats;
++ int i;
++
++ if (!skb_pull(skb, sizeof(*ev)))
++ return -EPROTO;
++
++ num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats);
++ num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
++ num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
++ num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
++
++ for (i = 0; i < num_pdev_stats; i++) {
++ const struct wmi_10_4_pdev_stats *src;
++ struct ath10k_fw_stats_pdev *dst;
++
++ src = (void *)skb->data;
++ if (!skb_pull(skb, sizeof(*src)))
++ return -EPROTO;
++
++ dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
++ if (!dst)
++ continue;
++
++ ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
++ ath10k_wmi_10_4_pull_pdev_stats_tx(&src->tx, dst);
++ ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
++ dst->rx_ovfl_errs = __le32_to_cpu(src->rx_ovfl_errs);
++ ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
++
++ list_add_tail(&dst->list, &stats->pdevs);
++ }
++
++ for (i = 0; i < num_pdev_ext_stats; i++) {
++ const struct wmi_10_2_pdev_ext_stats *src;
++
++ src = (void *)skb->data;
++ if (!skb_pull(skb, sizeof(*src)))
++ return -EPROTO;
++
++ /* FIXME: expose values to userspace
++ *
++ * Note: Even though this loop seems to do nothing it is
++ * required to parse following sub-structures properly.
++ */
++ }
++
++ /* fw doesn't implement vdev stats */
++
++ for (i = 0; i < num_peer_stats; i++) {
++ const struct wmi_10_4_peer_stats *src;
++ struct ath10k_fw_stats_peer *dst;
++
++ src = (void *)skb->data;
++ if (!skb_pull(skb, sizeof(*src)))
++ return -EPROTO;
++
++ dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
++ if (!dst)
++ continue;
++
++ ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
++ dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
++ dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
++ dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
++ /* FIXME: expose 10.4 specific values */
++
++ list_add_tail(&dst->list, &stats->peers);
++ }
++
++ return 0;
++}
++
+ void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb)
+ {
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_UPDATE_STATS_EVENTID\n");
+@@ -4935,6 +5056,9 @@ static void ath10k_wmi_10_4_op_rx(struct
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "received event id %d not implemented\n", id);
+ break;
++ case WMI_10_4_UPDATE_STATS_EVENTID:
++ ath10k_wmi_event_update_stats(ar, skb);
++ break;
+ default:
+ ath10k_warn(ar, "Unknown eventid: %d\n", id);
+ break;
+@@ -7022,6 +7146,90 @@ ath10k_wmi_op_gen_pdev_enable_adaptive_c
+ return skb;
+ }
+
++void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
++ struct ath10k_fw_stats *fw_stats,
++ char *buf)
++{
++ u32 len = 0;
++ u32 buf_len = ATH10K_FW_STATS_BUF_SIZE;
++ const struct ath10k_fw_stats_pdev *pdev;
++ const struct ath10k_fw_stats_vdev *vdev;
++ const struct ath10k_fw_stats_peer *peer;
++ size_t num_peers;
++ size_t num_vdevs;
++
++ spin_lock_bh(&ar->data_lock);
++
++ pdev = list_first_entry_or_null(&fw_stats->pdevs,
++ struct ath10k_fw_stats_pdev, list);
++ if (!pdev) {
++ ath10k_warn(ar, "failed to get pdev stats\n");
++ goto unlock;
++ }
++
++ num_peers = ath10k_wmi_fw_stats_num_peers(&fw_stats->peers);
++ num_vdevs = ath10k_wmi_fw_stats_num_vdevs(&fw_stats->vdevs);
++
++ ath10k_wmi_fw_pdev_base_stats_fill(pdev, buf, &len);
++ ath10k_wmi_fw_pdev_extra_stats_fill(pdev, buf, &len);
++ ath10k_wmi_fw_pdev_tx_stats_fill(pdev, buf, &len);
++
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "HW paused", pdev->hw_paused);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "Seqs posted", pdev->seq_posted);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "Seqs failed queueing", pdev->seq_failed_queueing);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "Seqs completed", pdev->seq_completed);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "Seqs restarted", pdev->seq_restarted);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MU Seqs posted", pdev->mu_seq_posted);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MPDUs SW flushed", pdev->mpdus_sw_flush);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MPDUs HW filtered", pdev->mpdus_hw_filter);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MPDUs truncated", pdev->mpdus_truncated);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MPDUs receive no ACK", pdev->mpdus_ack_failed);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "MPDUs expired", pdev->mpdus_expired);
++
++ ath10k_wmi_fw_pdev_rx_stats_fill(pdev, buf, &len);
++ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
++ "Num Rx Overflow errors", pdev->rx_ovfl_errs);
++
++ len += scnprintf(buf + len, buf_len - len, "\n");
++ len += scnprintf(buf + len, buf_len - len, "%30s (%zu)\n",
++ "ath10k VDEV stats", num_vdevs);
++ len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
++ "=================");
++
++ list_for_each_entry(vdev, &fw_stats->vdevs, list) {
++ ath10k_wmi_fw_vdev_stats_fill(vdev, buf, &len);
++ }
++
++ len += scnprintf(buf + len, buf_len - len, "\n");
++ len += scnprintf(buf + len, buf_len - len, "%30s (%zu)\n",
++ "ath10k PEER stats", num_peers);
++ len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
++ "=================");
++
++ list_for_each_entry(peer, &fw_stats->peers, list) {
++ ath10k_wmi_fw_peer_stats_fill(peer, buf, &len);
++ }
++
++unlock:
++ spin_unlock_bh(&ar->data_lock);
++
++ if (len >= buf_len)
++ buf[len - 1] = 0;
++ else
++ buf[len] = 0;
++}
++
+ static const struct wmi_ops wmi_ops = {
+ .rx = ath10k_wmi_op_rx,
+ .map_svc = wmi_main_svc_map,
+@@ -7292,6 +7500,7 @@ static const struct wmi_ops wmi_10_4_ops
+ .rx = ath10k_wmi_10_4_op_rx,
+ .map_svc = wmi_10_4_svc_map,
+
++ .pull_fw_stats = ath10k_wmi_10_4_op_pull_fw_stats,
+ .pull_scan = ath10k_wmi_op_pull_scan_ev,
+ .pull_mgmt_rx = ath10k_wmi_10_4_op_pull_mgmt_rx_ev,
+ .pull_ch_info = ath10k_wmi_10_4_op_pull_ch_info_ev,
+@@ -7341,9 +7550,11 @@ static const struct wmi_ops wmi_10_4_ops
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
+ .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+ .gen_delba_send = ath10k_wmi_op_gen_delba_send,
++ .fw_stats_fill = ath10k_wmi_10_4_op_fw_stats_fill,
+
+ /* shared with 10.2 */
+ .gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
++ .gen_request_stats = ath10k_wmi_op_gen_request_stats,
+ };
+
+ int ath10k_wmi_attach(struct ath10k *ar)
+--- a/drivers/net/wireless/ath/ath10k/wmi.h
++++ b/drivers/net/wireless/ath/ath10k/wmi.h
+@@ -3866,6 +3866,111 @@ struct wmi_pdev_stats_tx {
+ __le32 txop_ovf;
+ } __packed;
+
++struct wmi_10_4_pdev_stats_tx {
++ /* Num HTT cookies queued to dispatch list */
++ __le32 comp_queued;
++
++ /* Num HTT cookies dispatched */
++ __le32 comp_delivered;
++
++ /* Num MSDU queued to WAL */
++ __le32 msdu_enqued;
++
++ /* Num MPDU queue to WAL */
++ __le32 mpdu_enqued;
++
++ /* Num MSDUs dropped by WMM limit */
++ __le32 wmm_drop;
++
++ /* Num Local frames queued */
++ __le32 local_enqued;
++
++ /* Num Local frames done */
++ __le32 local_freed;
++
++ /* Num queued to HW */
++ __le32 hw_queued;
++
++ /* Num PPDU reaped from HW */
++ __le32 hw_reaped;
++
++ /* Num underruns */
++ __le32 underrun;
++
++ /* HW Paused. */
++ __le32 hw_paused;
++
++ /* Num PPDUs cleaned up in TX abort */
++ __le32 tx_abort;
++
++ /* Num MPDUs requed by SW */
++ __le32 mpdus_requed;
++
++ /* excessive retries */
++ __le32 tx_ko;
++
++ /* data hw rate code */
++ __le32 data_rc;
++
++ /* Scheduler self triggers */
++ __le32 self_triggers;
++
++ /* frames dropped due to excessive sw retries */
++ __le32 sw_retry_failure;
++
++ /* illegal rate phy errors */
++ __le32 illgl_rate_phy_err;
++
++ /* wal pdev continuous xretry */
++ __le32 pdev_cont_xretry;
++
++ /* wal pdev tx timeouts */
++ __le32 pdev_tx_timeout;
++
++ /* wal pdev resets */
++ __le32 pdev_resets;
++
++ /* frames dropped due to non-availability of stateless TIDs */
++ __le32 stateless_tid_alloc_failure;
++
++ __le32 phy_underrun;
++
++ /* MPDU is more than txop limit */
++ __le32 txop_ovf;
++
++ /* Number of Sequences posted */
++ __le32 seq_posted;
++
++ /* Number of Sequences failed queueing */
++ __le32 seq_failed_queueing;
++
++ /* Number of Sequences completed */
++ __le32 seq_completed;
++
++ /* Number of Sequences restarted */
++ __le32 seq_restarted;
++
++ /* Number of MU Sequences posted */
++ __le32 mu_seq_posted;
++
++ /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
++ __le32 mpdus_sw_flush;
++
++ /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
++ __le32 mpdus_hw_filter;
++
++ /* Num MPDUs truncated by PDG
++ * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
++ */
++ __le32 mpdus_truncated;
++
++ /* Num MPDUs that was tried but didn't receive ACK or BA */
++ __le32 mpdus_ack_failed;
++
++ /* Num MPDUs that was dropped due to expiry. */
++ __le32 mpdus_expired;
++} __packed;
++
+ struct wmi_pdev_stats_rx {
+ /* Cnts any change in ring routing mid-ppdu */
+ __le32 mid_ppdu_route_change;
+@@ -4039,6 +4144,16 @@ struct wmi_10_2_pdev_stats {
+ struct wmi_pdev_stats_extra extra;
+ } __packed;
+
++struct wmi_10_4_pdev_stats {
++ struct wmi_pdev_stats_base base;
++ struct wmi_10_4_pdev_stats_tx tx;
++ struct wmi_pdev_stats_rx rx;
++ __le32 rx_ovfl_errs;
++ struct wmi_pdev_stats_mem mem;
++ __le32 sram_free_size;
++ struct wmi_pdev_stats_extra extra;
++} __packed;
++
+ /*
+ * VDEV statistics
+ * TODO: add all VDEV stats here
+@@ -4080,6 +4195,23 @@ struct wmi_10_2_4_peer_stats {
+ __le32 unknown_value; /* FIXME: what is this word? */
+ } __packed;
+
++struct wmi_10_4_peer_stats {
++ struct wmi_mac_addr peer_macaddr;
++ __le32 peer_rssi;
++ __le32 peer_rssi_seq_num;
++ __le32 peer_tx_rate;
++ __le32 peer_rx_rate;
++ __le32 current_per;
++ __le32 retries;
++ __le32 tx_rate_count;
++ __le32 max_4ms_frame_len;
++ __le32 total_sub_frames;
++ __le32 tx_bytes;
++ __le32 num_pkt_loss_overflow[4];
++ __le32 num_pkt_loss_excess_retry[4];
++ __le32 peer_rssi_changed;
++} __packed;
++
+ struct wmi_10_2_pdev_ext_stats {
+ __le32 rx_rssi_comb;
+ __le32 rx_rssi[4];
+@@ -6201,5 +6333,8 @@ void ath10k_wmi_10x_op_fw_stats_fill(str
+ char *buf);
+ size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
+ size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
++void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
++ struct ath10k_fw_stats *fw_stats,
++ char *buf);
+
+ #endif /* _WMI_H_ */
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Fri, 23 Oct 2015 18:01:03 +0530
+Subject: [PATCH] ath10k: use local memory instead of shadow descriptor
+ in ce_send
+
+Currently to avoid uncached memory access while filling up copy engine
+descriptors, shadow descriptors are used. This can be optimized further
+by removing shadow descriptors. To achieve that first shadow ring
+dependency in ce_send is removed by creating local copy of the
+descriptor on stack and make a one-shot copy into the "uncached"
+descriptor.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/ce.c
++++ b/drivers/net/wireless/ath/ath10k/ce.c
+@@ -274,7 +274,7 @@ int ath10k_ce_send_nolock(struct ath10k_
+ {
+ struct ath10k *ar = ce_state->ar;
+ struct ath10k_ce_ring *src_ring = ce_state->src_ring;
+- struct ce_desc *desc, *sdesc;
++ struct ce_desc *desc, sdesc;
+ unsigned int nentries_mask = src_ring->nentries_mask;
+ unsigned int sw_index = src_ring->sw_index;
+ unsigned int write_index = src_ring->write_index;
+@@ -294,7 +294,6 @@ int ath10k_ce_send_nolock(struct ath10k_
+
+ desc = CE_SRC_RING_TO_DESC(src_ring->base_addr_owner_space,
+ write_index);
+- sdesc = CE_SRC_RING_TO_DESC(src_ring->shadow_base, write_index);
+
+ desc_flags |= SM(transfer_id, CE_DESC_FLAGS_META_DATA);
+
+@@ -303,11 +302,11 @@ int ath10k_ce_send_nolock(struct ath10k_
+ if (flags & CE_SEND_FLAG_BYTE_SWAP)
+ desc_flags |= CE_DESC_FLAGS_BYTE_SWAP;
+
+- sdesc->addr = __cpu_to_le32(buffer);
+- sdesc->nbytes = __cpu_to_le16(nbytes);
+- sdesc->flags = __cpu_to_le16(desc_flags);
++ sdesc.addr = __cpu_to_le32(buffer);
++ sdesc.nbytes = __cpu_to_le16(nbytes);
++ sdesc.flags = __cpu_to_le16(desc_flags);
+
+- *desc = *sdesc;
++ *desc = sdesc;
+
+ src_ring->per_transfer_context[write_index] = per_transfer_context;
+
+@@ -614,7 +613,7 @@ int ath10k_ce_completed_send_next_nolock
+ if (read_index == sw_index)
+ return -EIO;
+
+- sbase = src_ring->shadow_base;
++ sbase = src_ring->base_addr_owner_space;
+ sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
+
+ /* Return data from completed source descriptor */
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Fri, 23 Oct 2015 18:01:04 +0530
+Subject: [PATCH] ath10k: remove send completion validation in diag
+ read/write
+
+CE diag window access is serialized (it has to be by design) so
+there's no way to get a different send completion. so there's no
+need for post completion validation.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -920,16 +920,6 @@ static int ath10k_pci_diag_read_mem(stru
+ }
+ }
+
+- if (nbytes != completed_nbytes) {
+- ret = -EIO;
+- goto done;
+- }
+-
+- if (buf != (u32)address) {
+- ret = -EIO;
+- goto done;
+- }
+-
+ i = 0;
+ while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
+ &completed_nbytes,
+@@ -1094,16 +1084,6 @@ static int ath10k_pci_diag_write_mem(str
+ }
+ }
+
+- if (nbytes != completed_nbytes) {
+- ret = -EIO;
+- goto done;
+- }
+-
+- if (buf != ce_data) {
+- ret = -EIO;
+- goto done;
+- }
+-
+ i = 0;
+ while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
+ &completed_nbytes,
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Fri, 23 Oct 2015 18:01:05 +0530
+Subject: [PATCH] ath10k: cleanup copy engine send completion
+
+The physical address necessary to unmap DMA ('bufferp') is stored
+in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id
+when handling send completion (htc ep id is stored in sk_buff control
+buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp}
+are removed from CE send completion. This change is needed before removing
+the shadow copy of copy engine (CE) descriptors in follow up patch.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/ce.c
++++ b/drivers/net/wireless/ath/ath10k/ce.c
+@@ -578,17 +578,13 @@ int ath10k_ce_revoke_recv_next(struct at
+ * The caller takes responsibility for any necessary locking.
+ */
+ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
+- void **per_transfer_contextp,
+- u32 *bufferp,
+- unsigned int *nbytesp,
+- unsigned int *transfer_idp)
++ void **per_transfer_contextp)
+ {
+ struct ath10k_ce_ring *src_ring = ce_state->src_ring;
+ u32 ctrl_addr = ce_state->ctrl_addr;
+ struct ath10k *ar = ce_state->ar;
+ unsigned int nentries_mask = src_ring->nentries_mask;
+ unsigned int sw_index = src_ring->sw_index;
+- struct ce_desc *sdesc, *sbase;
+ unsigned int read_index;
+
+ if (src_ring->hw_index == sw_index) {
+@@ -613,15 +609,6 @@ int ath10k_ce_completed_send_next_nolock
+ if (read_index == sw_index)
+ return -EIO;
+
+- sbase = src_ring->base_addr_owner_space;
+- sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
+-
+- /* Return data from completed source descriptor */
+- *bufferp = __le32_to_cpu(sdesc->addr);
+- *nbytesp = __le16_to_cpu(sdesc->nbytes);
+- *transfer_idp = MS(__le16_to_cpu(sdesc->flags),
+- CE_DESC_FLAGS_META_DATA);
+-
+ if (per_transfer_contextp)
+ *per_transfer_contextp =
+ src_ring->per_transfer_context[sw_index];
+@@ -696,10 +683,7 @@ int ath10k_ce_cancel_send_next(struct at
+ }
+
+ int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
+- void **per_transfer_contextp,
+- u32 *bufferp,
+- unsigned int *nbytesp,
+- unsigned int *transfer_idp)
++ void **per_transfer_contextp)
+ {
+ struct ath10k *ar = ce_state->ar;
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+@@ -707,9 +691,7 @@ int ath10k_ce_completed_send_next(struct
+
+ spin_lock_bh(&ar_pci->ce_lock);
+ ret = ath10k_ce_completed_send_next_nolock(ce_state,
+- per_transfer_contextp,
+- bufferp, nbytesp,
+- transfer_idp);
++ per_transfer_contextp);
+ spin_unlock_bh(&ar_pci->ce_lock);
+
+ return ret;
+--- a/drivers/net/wireless/ath/ath10k/ce.h
++++ b/drivers/net/wireless/ath/ath10k/ce.h
+@@ -192,16 +192,10 @@ int ath10k_ce_completed_recv_next(struct
+ * Pops 1 completed send buffer from Source ring.
+ */
+ int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
+- void **per_transfer_contextp,
+- u32 *bufferp,
+- unsigned int *nbytesp,
+- unsigned int *transfer_idp);
++ void **per_transfer_contextp);
+
+ int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
+- void **per_transfer_contextp,
+- u32 *bufferp,
+- unsigned int *nbytesp,
+- unsigned int *transfer_idp);
++ void **per_transfer_contextp);
+
+ /*==================CE Engine Initialization=======================*/
+
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -910,9 +910,8 @@ static int ath10k_pci_diag_read_mem(stru
+ goto done;
+
+ i = 0;
+- while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
+- &completed_nbytes,
+- &id) != 0) {
++ while (ath10k_ce_completed_send_next_nolock(ce_diag,
++ NULL) != 0) {
+ mdelay(1);
+ if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+ ret = -EBUSY;
+@@ -1073,9 +1072,8 @@ static int ath10k_pci_diag_write_mem(str
+ goto done;
+
+ i = 0;
+- while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
+- &completed_nbytes,
+- &id) != 0) {
++ while (ath10k_ce_completed_send_next_nolock(ce_diag,
++ NULL) != 0) {
+ mdelay(1);
+
+ if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
+@@ -1139,13 +1137,9 @@ static void ath10k_pci_htc_tx_cb(struct
+ struct ath10k *ar = ce_state->ar;
+ struct sk_buff_head list;
+ struct sk_buff *skb;
+- u32 ce_data;
+- unsigned int nbytes;
+- unsigned int transfer_id;
+
+ __skb_queue_head_init(&list);
+- while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
+- &nbytes, &transfer_id) == 0) {
++ while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
+ /* no need to call tx completion for NULL pointers */
+ if (skb == NULL)
+ continue;
+@@ -1215,12 +1209,8 @@ static void ath10k_pci_htt_tx_cb(struct
+ {
+ struct ath10k *ar = ce_state->ar;
+ struct sk_buff *skb;
+- u32 ce_data;
+- unsigned int nbytes;
+- unsigned int transfer_id;
+
+- while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
+- &nbytes, &transfer_id) == 0) {
++ while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
+ /* no need to call tx completion for NULL pointers */
+ if (!skb)
+ continue;
+@@ -1796,12 +1786,8 @@ err_dma:
+ static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
+ {
+ struct bmi_xfer *xfer;
+- u32 ce_data;
+- unsigned int nbytes;
+- unsigned int transfer_id;
+
+- if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data,
+- &nbytes, &transfer_id))
++ if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer))
+ return;
+
+ xfer->tx_done = true;
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Fri, 23 Oct 2015 18:01:06 +0530
+Subject: [PATCH] ath10k: remove shadow copy of CE descriptors for source
+ ring
+
+For the messages from host to target, shadow copy of CE descriptors
+are maintained in source ring. Before writing actual CE descriptor,
+first shadow copy is filled and then it is copied to CE address space.
+To optimize in download path and to reduce d-cache pressure, removing
+shadow copy of CE descriptors. This will also reduce driver memory
+consumption by 33KB during on device probing.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/ce.c
++++ b/drivers/net/wireless/ath/ath10k/ce.c
+@@ -921,27 +921,6 @@ ath10k_ce_alloc_src_ring(struct ath10k *
+ src_ring->base_addr_ce_space_unaligned,
+ CE_DESC_RING_ALIGN);
+
+- /*
+- * Also allocate a shadow src ring in regular
+- * mem to use for faster access.
+- */
+- src_ring->shadow_base_unaligned =
+- kmalloc((nentries * sizeof(struct ce_desc) +
+- CE_DESC_RING_ALIGN), GFP_KERNEL);
+- if (!src_ring->shadow_base_unaligned) {
+- dma_free_coherent(ar->dev,
+- (nentries * sizeof(struct ce_desc) +
+- CE_DESC_RING_ALIGN),
+- src_ring->base_addr_owner_space,
+- src_ring->base_addr_ce_space);
+- kfree(src_ring);
+- return ERR_PTR(-ENOMEM);
+- }
+-
+- src_ring->shadow_base = PTR_ALIGN(
+- src_ring->shadow_base_unaligned,
+- CE_DESC_RING_ALIGN);
+-
+ return src_ring;
+ }
+
+@@ -1120,7 +1099,6 @@ void ath10k_ce_free_pipe(struct ath10k *
+ struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
+
+ if (ce_state->src_ring) {
+- kfree(ce_state->src_ring->shadow_base_unaligned);
+ dma_free_coherent(ar->dev,
+ (ce_state->src_ring->nentries *
+ sizeof(struct ce_desc) +
+--- a/drivers/net/wireless/ath/ath10k/ce.h
++++ b/drivers/net/wireless/ath/ath10k/ce.h
+@@ -100,12 +100,6 @@ struct ath10k_ce_ring {
+
+ /* CE address space */
+ u32 base_addr_ce_space;
+- /*
+- * Start of shadow copy of descriptors, within regular memory.
+- * Aligned to descriptor-size boundary.
+- */
+- void *shadow_base_unaligned;
+- struct ce_desc *shadow_base;
+
+ /* keep last */
+ void *per_transfer_context[0];
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -1594,7 +1594,6 @@ static void ath10k_pci_tx_pipe_cleanup(s
+ struct ath10k_pci *ar_pci;
+ struct ath10k_ce_pipe *ce_pipe;
+ struct ath10k_ce_ring *ce_ring;
+- struct ce_desc *ce_desc;
+ struct sk_buff *skb;
+ int i;
+
+@@ -1609,10 +1608,6 @@ static void ath10k_pci_tx_pipe_cleanup(s
+ if (!pci_pipe->buf_sz)
+ return;
+
+- ce_desc = ce_ring->shadow_base;
+- if (WARN_ON(!ce_desc))
+- return;
+-
+ for (i = 0; i < ce_ring->nentries; i++) {
+ skb = ce_ring->per_transfer_context[i];
+ if (!skb)
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Tue, 27 Oct 2015 17:51:11 +0530
+Subject: [PATCH] ath10k: remove supported chain mask
+
+Removing supported chainmask fields as it can be always derived
+from num_rf_chains.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/core.h
++++ b/drivers/net/wireless/ath/ath10k/core.h
+@@ -745,8 +745,6 @@ struct ath10k {
+ int num_started_vdevs;
+
+ /* Protected by conf-mutex */
+- u8 supp_tx_chainmask;
+- u8 supp_rx_chainmask;
+ u8 cfg_tx_chainmask;
+ u8 cfg_rx_chainmask;
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -3736,13 +3736,8 @@ static int ath10k_get_antenna(struct iee
+
+ mutex_lock(&ar->conf_mutex);
+
+- if (ar->cfg_tx_chainmask) {
+- *tx_ant = ar->cfg_tx_chainmask;
+- *rx_ant = ar->cfg_rx_chainmask;
+- } else {
+- *tx_ant = ar->supp_tx_chainmask;
+- *rx_ant = ar->supp_rx_chainmask;
+- }
++ *tx_ant = ar->cfg_tx_chainmask;
++ *rx_ant = ar->cfg_rx_chainmask;
+
+ mutex_unlock(&ar->conf_mutex);
+
+@@ -3884,9 +3879,7 @@ static int ath10k_start(struct ieee80211
+ }
+ }
+
+- if (ar->cfg_tx_chainmask)
+- __ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
+- ar->cfg_rx_chainmask);
++ __ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask);
+
+ /*
+ * By default FW set ARP frames ac to voice (6). In that case ARP
+@@ -7169,8 +7162,8 @@ int ath10k_mac_register(struct ath10k *a
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+- ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
+- ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
++ ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask;
++ ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask;
+
+ if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
+ ar->hw->wiphy->interface_modes |=
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -4460,8 +4460,10 @@ static void ath10k_wmi_event_service_rea
+ ar->num_rf_chains = ar->max_spatial_stream;
+ }
+
+- ar->supp_tx_chainmask = (1 << ar->num_rf_chains) - 1;
+- ar->supp_rx_chainmask = (1 << ar->num_rf_chains) - 1;
++ if (!ar->cfg_tx_chainmask) {
++ ar->cfg_tx_chainmask = (1 << ar->num_rf_chains) - 1;
++ ar->cfg_rx_chainmask = (1 << ar->num_rf_chains) - 1;
++ }
+
+ if (strlen(ar->hw->wiphy->fw_version) == 0) {
+ snprintf(ar->hw->wiphy->fw_version,
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Tue, 27 Oct 2015 17:51:12 +0530
+Subject: [PATCH] ath10k: fill HT/VHT MCS rateset only for configured
+ chainmask
+
+HT/VHT MCS rateset should be filled only for configured chainmask
+rather that max supported chainmask. Fix that by checking configured
+chainmask while filling HT/VHT MCS rate map.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -6984,7 +6984,7 @@ static struct ieee80211_sta_vht_cap ath1
+
+ mcs_map = 0;
+ for (i = 0; i < 8; i++) {
+- if (i < ar->num_rf_chains)
++ if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
+ mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
+ else
+ mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
+@@ -7051,8 +7051,10 @@ static struct ieee80211_sta_ht_cap ath10
+ if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+ ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+- for (i = 0; i < ar->num_rf_chains; i++)
+- ht_cap.mcs.rx_mask[i] = 0xFF;
++ for (i = 0; i < ar->num_rf_chains; i++) {
++ if (ar->cfg_rx_chainmask & BIT(i))
++ ht_cap.mcs.rx_mask[i] = 0xFF;
++ }
+
+ ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
--- /dev/null
+From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Date: Tue, 27 Oct 2015 17:51:13 +0530
+Subject: [PATCH] ath10k: move static HT/VHT capability setup functions
+
+Move HT and VHT capabiltity setup static functions to avoid
+forward declaration.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -3757,6 +3757,146 @@ static void ath10k_check_chain_mask(stru
+ dbg, cm);
+ }
+
++static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
++{
++ int nsts = ar->vht_cap_info;
++
++ nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
++ nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
++
++ /* If firmware does not deliver to host number of space-time
++ * streams supported, assume it support up to 4 BF STS and return
++ * the value for VHT CAP: nsts-1)
++ */
++ if (nsts == 0)
++ return 3;
++
++ return nsts;
++}
++
++static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
++{
++ int sound_dim = ar->vht_cap_info;
++
++ sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
++ sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
++
++ /* If the sounding dimension is not advertised by the firmware,
++ * let's use a default value of 1
++ */
++ if (sound_dim == 0)
++ return 1;
++
++ return sound_dim;
++}
++
++static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
++{
++ struct ieee80211_sta_vht_cap vht_cap = {0};
++ u16 mcs_map;
++ u32 val;
++ int i;
++
++ vht_cap.vht_supported = 1;
++ vht_cap.cap = ar->vht_cap_info;
++
++ if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
++ IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
++ val = ath10k_mac_get_vht_cap_bf_sts(ar);
++ val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
++ val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
++
++ vht_cap.cap |= val;
++ }
++
++ if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
++ IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
++ val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
++ val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
++ val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
++
++ vht_cap.cap |= val;
++ }
++
++ mcs_map = 0;
++ for (i = 0; i < 8; i++) {
++ if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
++ mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2);
++ else
++ mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
++ }
++
++ vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
++ vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
++
++ return vht_cap;
++}
++
++static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
++{
++ int i;
++ struct ieee80211_sta_ht_cap ht_cap = {0};
++
++ if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
++ return ht_cap;
++
++ ht_cap.ht_supported = 1;
++ ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
++ ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
++ ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
++ ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
++ ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
++
++ if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
++ ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
++
++ if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
++ ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
++
++ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
++ u32 smps;
++
++ smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
++ smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
++
++ ht_cap.cap |= smps;
++ }
++
++ if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
++ ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
++
++ if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
++ u32 stbc;
++
++ stbc = ar->ht_cap_info;
++ stbc &= WMI_HT_CAP_RX_STBC;
++ stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
++ stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
++ stbc &= IEEE80211_HT_CAP_RX_STBC;
++
++ ht_cap.cap |= stbc;
++ }
++
++ if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
++ ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
++
++ if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
++ ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
++
++ /* max AMSDU is implicitly taken from vht_cap_info */
++ if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
++ ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
++
++ for (i = 0; i < ar->num_rf_chains; i++) {
++ if (ar->cfg_rx_chainmask & BIT(i))
++ ht_cap.mcs.rx_mask[i] = 0xFF;
++ }
++
++ ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
++
++ return ht_cap;
++}
++
+ static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
+ {
+ int ret;
+@@ -4068,39 +4208,6 @@ static u32 get_nss_from_chainmask(u16 ch
+ return 1;
+ }
+
+-static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
+-{
+- int nsts = ar->vht_cap_info;
+-
+- nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
+- nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
+-
+- /* If firmware does not deliver to host number of space-time
+- * streams supported, assume it support up to 4 BF STS and return
+- * the value for VHT CAP: nsts-1)
+- * */
+- if (nsts == 0)
+- return 3;
+-
+- return nsts;
+-}
+-
+-static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
+-{
+- int sound_dim = ar->vht_cap_info;
+-
+- sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
+- sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
+-
+- /* If the sounding dimension is not advertised by the firmware,
+- * let's use a default value of 1
+- */
+- if (sound_dim == 0)
+- return 1;
+-
+- return sound_dim;
+-}
+-
+ static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
+ {
+ u32 value = 0;
+@@ -6954,113 +7061,6 @@ static const struct ieee80211_iface_comb
+ },
+ };
+
+-static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+-{
+- struct ieee80211_sta_vht_cap vht_cap = {0};
+- u16 mcs_map;
+- u32 val;
+- int i;
+-
+- vht_cap.vht_supported = 1;
+- vht_cap.cap = ar->vht_cap_info;
+-
+- if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+- IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
+- val = ath10k_mac_get_vht_cap_bf_sts(ar);
+- val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
+- val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
+-
+- vht_cap.cap |= val;
+- }
+-
+- if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+- IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
+- val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
+- val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
+- val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
+-
+- vht_cap.cap |= val;
+- }
+-
+- mcs_map = 0;
+- for (i = 0; i < 8; i++) {
+- if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
+- mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
+- else
+- mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
+- }
+-
+- vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+- vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+-
+- return vht_cap;
+-}
+-
+-static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+-{
+- int i;
+- struct ieee80211_sta_ht_cap ht_cap = {0};
+-
+- if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+- return ht_cap;
+-
+- ht_cap.ht_supported = 1;
+- ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+- ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+- ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+- ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+- ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+- ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+- ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+- u32 smps;
+-
+- smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
+- smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+-
+- ht_cap.cap |= smps;
+- }
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+- ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+- u32 stbc;
+-
+- stbc = ar->ht_cap_info;
+- stbc &= WMI_HT_CAP_RX_STBC;
+- stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+- stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+- stbc &= IEEE80211_HT_CAP_RX_STBC;
+-
+- ht_cap.cap |= stbc;
+- }
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+- ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+-
+- if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+- ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+-
+- /* max AMSDU is implicitly taken from vht_cap_info */
+- if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+- ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+-
+- for (i = 0; i < ar->num_rf_chains; i++) {
+- if (ar->cfg_rx_chainmask & BIT(i))
+- ht_cap.mcs.rx_mask[i] = 0xFF;
+- }
+-
+- ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+-
+- return ht_cap;
+-}
+-
+ static void ath10k_get_arvif_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+ {
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -693,7 +693,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw
+@@ -695,7 +695,7 @@ bool ath9k_hw_stopdmarecv(struct ath_hw
{
#define AH_RX_STOP_DMA_TIMEOUT 10000 /* usec */
struct ath_common *common = ath9k_hw_common(ah);
int i;
/* Enable access to the DMA observation bus */
-@@ -723,6 +723,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw
+@@ -725,6 +725,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw
}
if (i == 0) {
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1843,6 +1843,16 @@ int ath10k_core_register(struct ath10k *
+@@ -1844,6 +1844,16 @@ int ath10k_core_register(struct ath10k *
ar->chip_id = chip_id;
queue_work(ar->workqueue, &ar->register_work);
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -7085,6 +7085,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
+@@ -7092,6 +7092,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
return arvif_iter.arvif;
}
int ath10k_mac_register(struct ath10k *ar)
{
static const u32 cipher_suites[] = {
-@@ -7310,6 +7325,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -7317,6 +7332,12 @@ int ath10k_mac_register(struct ath10k *a
ar->hw->wiphy->cipher_suites = cipher_suites;
ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
projects / openwrt / staging / wigyori.git / commitdiff