From: Rafał Miłecki Date: Thu, 27 Dec 2018 20:54:28 +0000 (+0100) Subject: brcm47xx: add support for the kernel 4.19 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=commitdiff_plain;h=25d8aa7d02d2919d9cae14c2c8db3fcc09420edd brcm47xx: add support for the kernel 4.19 One patch that wasn't ported due to a lot of conflict is: 901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch Hopefully a correct/real fix will get developed before we switch brcm47xx to the 4.14. This IS NOT ready for switching/trying/using 4.19 yet due to some DMA regression affecting bgmac: [ 0.945472] bgmac_bcma bcma0:2: Found PHY addr: 25 [ 0.954565] libphy: bcma_mdio mii bus: probed [ 0.959486] ------------[ cut here ]------------ [ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4 [ 0.973751] Modules linked in: [ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0 [ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47 [ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f [ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000 [ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8 [ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000 [ 1.025804] ... [ 1.028325] Call Trace: [ 1.030875] [<8000aef8>] show_stack+0x58/0x100 [ 1.035513] [<8001f8b4>] __warn+0xe4/0x118 [ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64 [ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4 [ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590 [ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70 [ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8 [ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec [ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0 [ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218 [ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c [ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44 [ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0 [ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218 [ 1.099886] [<803a082c>] kernel_init+0x10/0x104 [ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c [ 1.110107] ---[ end trace f441c0d873d1fb5b ]--- [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/brcm47xx/config-4.19 b/target/linux/brcm47xx/config-4.19 new file mode 100644 index 0000000000..8f679b377f --- /dev/null +++ b/target/linux/brcm47xx/config-4.19 @@ -0,0 +1,209 @@ +CONFIG_ADM6996_PHY=y +CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MMAP_RND_BITS_MAX=15 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_BCM47XX=y +CONFIG_BCM47XX_BCMA=y +CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y +CONFIG_BCM47XX_SSB=y +CONFIG_BCM47XX_WDT=y +CONFIG_BCMA=y +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_DEBUG=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +CONFIG_BCMA_DRIVER_MIPS=y +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y +CONFIG_BCMA_HOST_PCI=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_NFLASH=y +CONFIG_BCMA_PFLASH=y +CONFIG_BCMA_SFLASH=y +# CONFIG_BGMAC_BCMA is not set +CONFIG_BLK_MQ_PCI=y +CONFIG_CEVT_R4K=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="noinitrd console=ttyS0,115200" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_CPU_BMIPS is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y +CONFIG_DMA_NONCOHERENT_MMAP=y +CONFIG_DMA_NONCOHERENT_OPS=y +# CONFIG_EARLY_PRINTK is not set +CONFIG_FIXED_PHY=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_LIB_ASHLDI3=y +CONFIG_GENERIC_LIB_ASHRDI3=y +CONFIG_GENERIC_LIB_CMPDI2=y +CONFIG_GENERIC_LIB_LSHRDI3=y +CONFIG_GENERIC_LIB_UCMPDI2=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_WDT=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_COMPILER_H=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO_REGISTER=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y +CONFIG_MIGRATION=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_BCM47XXSFLASH=y +CONFIG_MTD_BCM47XX_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCM47XXNFLASH=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_PARSER_TRX=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_EXCEPT_FILL=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_OF is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SRCU=y +CONFIG_SSB=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_DRIVER_EXTIF=y +CONFIG_SSB_DRIVER_GIGE=y +CONFIG_SSB_DRIVER_GPIO=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_HOST_SOC=y +CONFIG_SSB_PCICORE_HOSTMODE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_SERIAL=y +CONFIG_SSB_SFLASH=y +CONFIG_SSB_SPROM=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_B53=y +# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set +CONFIG_SWCONFIG_B53_PHY_DRIVER=y +CONFIG_SWCONFIG_B53_PHY_FIXUP=y +# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_BMIPS=y +CONFIG_SYS_HAS_CPU_BMIPS32_3300=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y +CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch new file mode 100644 index 0000000000..f3415b5c8e --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/159-cpu_fixes.patch @@ -0,0 +1,509 @@ +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -25,6 +25,38 @@ + extern void (*r4k_blast_dcache)(void); + extern void (*r4k_blast_icache)(void); + ++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2) ++#include ++#include ++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg() ++ ++static inline unsigned long bcm4710_dummy_rreg(void) ++{ ++ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)); ++} ++ ++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr)) ++ ++static inline unsigned long bcm4710_fill_tlb(void *addr) ++{ ++ return *(unsigned long *)addr; ++} ++ ++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr)) ++ ++static inline void bcm4710_protected_fill_tlb(void *addr) ++{ ++ unsigned long x; ++ get_dbe(x, (unsigned long *)addr);; ++} ++ ++#else ++#define BCM4710_DUMMY_RREG() ++ ++#define BCM4710_FILL_TLB(addr) ++#define BCM4710_PROTECTED_FILL_TLB(addr) ++#endif ++ + /* + * This macro return a properly sign-extended address suitable as base address + * for indexed cache operations. Two issues here: +@@ -98,6 +130,7 @@ static inline void flush_icache_line_ind + static inline void flush_dcache_line_indexed(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Index_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -125,6 +158,7 @@ static inline void flush_icache_line(uns + static inline void flush_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -132,6 +166,7 @@ static inline void flush_dcache_line(uns + static inline void invalidate_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Invalidate_D, addr); + __dflush_epilogue + } +@@ -205,6 +240,7 @@ static inline int protected_flush_icache + #ifdef CONFIG_EVA + return protected_cachee_op(Hit_Invalidate_I, addr); + #else ++ BCM4710_DUMMY_RREG(); + return protected_cache_op(Hit_Invalidate_I, addr); + #endif + } +@@ -218,6 +254,7 @@ static inline int protected_flush_icache + */ + static inline int protected_writeback_dcache_line(unsigned long addr) + { ++ BCM4710_DUMMY_RREG(); + #ifdef CONFIG_EVA + return protected_cachee_op(Hit_Writeback_Inv_D, addr); + #else +@@ -575,8 +612,51 @@ static inline void invalidate_tcache_pag + : "r" (base), \ + "i" (op)); + ++static inline void blast_dcache(void) ++{ ++ unsigned long start = KSEG0; ++ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; ++ unsigned long end = (start + dcache_size); ++ ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ ++ BCM4710_FILL_TLB(start); ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Hit_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page_indexed(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; ++ unsigned long ws_end = current_cpu_data.dcache.ways << ++ current_cpu_data.dcache.waybit; ++ unsigned long ws, addr; ++ for (ws = 0; ws < ws_end; ws += ws_inc) { ++ start = page + ws; ++ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, addr); ++ } ++ } ++} ++ + /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ +-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \ ++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \ + static inline void extra##blast_##pfx##cache##lsize(void) \ + { \ + unsigned long start = INDEX_BASE; \ +@@ -588,6 +668,7 @@ static inline void extra##blast_##pfx##c + \ + __##pfx##flush_prologue \ + \ ++ war \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ +@@ -602,6 +683,7 @@ static inline void extra##blast_##pfx##c + \ + __##pfx##flush_prologue \ + \ ++ war \ + do { \ + cache##lsize##_unroll32(start, hitop); \ + start += lsize * 32; \ +@@ -620,6 +702,8 @@ static inline void extra##blast_##pfx##c + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ ++ war \ ++ \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ +@@ -629,26 +713,26 @@ static inline void extra##blast_##pfx##c + __##pfx##flush_epilogue \ + } + +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, ) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, ) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, ) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, ) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, ) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, ) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) +- +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , ) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , ) ++ ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , ) ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , ) + + #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \ + static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \ +@@ -677,53 +761,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde + __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) + + /* build blast_xxx_range, protected_blast_xxx_range */ +-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \ ++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \ + static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \ + unsigned long end) \ + { \ + unsigned long lsize = cpu_##desc##_line_size(); \ +- unsigned long lsize_2 = lsize * 2; \ +- unsigned long lsize_3 = lsize * 3; \ +- unsigned long lsize_4 = lsize * 4; \ +- unsigned long lsize_5 = lsize * 5; \ +- unsigned long lsize_6 = lsize * 6; \ +- unsigned long lsize_7 = lsize * 7; \ +- unsigned long lsize_8 = lsize * 8; \ + unsigned long addr = start & ~(lsize - 1); \ +- unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \ +- int lines = (aend - addr) / lsize; \ ++ unsigned long aend = (end - 1) & ~(lsize - 1); \ ++ war \ + \ + __##pfx##flush_prologue \ + \ +- while (lines >= 8) { \ +- prot##cache_op(hitop, addr); \ +- prot##cache_op(hitop, addr + lsize); \ +- prot##cache_op(hitop, addr + lsize_2); \ +- prot##cache_op(hitop, addr + lsize_3); \ +- prot##cache_op(hitop, addr + lsize_4); \ +- prot##cache_op(hitop, addr + lsize_5); \ +- prot##cache_op(hitop, addr + lsize_6); \ +- prot##cache_op(hitop, addr + lsize_7); \ +- addr += lsize_8; \ +- lines -= 8; \ +- } \ +- \ +- if (lines & 0x4) { \ +- prot##cache_op(hitop, addr); \ +- prot##cache_op(hitop, addr + lsize); \ +- prot##cache_op(hitop, addr + lsize_2); \ +- prot##cache_op(hitop, addr + lsize_3); \ +- addr += lsize_4; \ +- } \ +- \ +- if (lines & 0x2) { \ +- prot##cache_op(hitop, addr); \ +- prot##cache_op(hitop, addr + lsize); \ +- addr += lsize_2; \ +- } \ +- \ +- if (lines & 0x1) { \ ++ while (1) { \ ++ war2 \ + prot##cache_op(hitop, addr); \ ++ if (addr == aend) \ ++ break; \ ++ addr += lsize; \ + } \ + \ + __##pfx##flush_epilogue \ +@@ -731,8 +785,8 @@ static inline void prot##extra##blast_## + + #ifndef CONFIG_EVA + +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, ) +-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , ) + + #else + +@@ -769,14 +823,14 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache + __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I) + + #endif +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, ) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , ) + __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \ +- protected_, loongson2_) +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , ) +-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , ) +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , ) ++ protected_, loongson2_, , ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , ) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , ) + /* blast_inv_dcache_range */ +-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , ) +-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , ) ++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , ) + + #endif /* _ASM_R4KCACHE_H */ +--- a/arch/mips/include/asm/stackframe.h ++++ b/arch/mips/include/asm/stackframe.h +@@ -428,6 +428,10 @@ + eretnc + #else + .set arch=r4000 ++#ifdef CONFIG_BCM47XX ++ nop ++ nop ++#endif + eret + .set mips0 + #endif +--- a/arch/mips/kernel/genex.S ++++ b/arch/mips/kernel/genex.S +@@ -21,6 +21,19 @@ + #include + #include + ++#ifdef CONFIG_BCM47XX ++# ifdef eret ++# undef eret ++# endif ++# define eret \ ++ .set push; \ ++ .set noreorder; \ ++ nop; \ ++ nop; \ ++ eret; \ ++ .set pop; ++#endif ++ + __INIT + + /* +@@ -32,6 +45,9 @@ + NESTED(except_vec3_generic, 0, sp) + .set push + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++#endif + #if R5432_CP0_INTERRUPT_WAR + mfc0 k0, CP0_INDEX + #endif +@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp) + .set push + .set arch=r4000 + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++#endif + mfc0 k1, CP0_CAUSE + li k0, 31<<2 + andi k1, k1, 0x7c +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -39,6 +39,9 @@ + #include + #include + ++/* For enabling BCM4710 cache workarounds */ ++static int bcm4710 = 0; ++ + /* + * Bits describing what cache ops an SMP callback function may perform. + * +@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page = blast_dcache_page; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_user_page = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_page_indexed = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void) + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache = blast_dcache; ++ else + if (dc_lsize == 0) + r4k_blast_dcache = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -957,6 +969,8 @@ static void local_r4k_flush_cache_sigtra + } + + R4600_HIT_CACHEOP_WAR_IMPL; ++ BCM4710_PROTECTED_FILL_TLB(addr); ++ BCM4710_PROTECTED_FILL_TLB(addr + 4); + if (!cpu_has_ic_fills_f_dc) { + if (dc_lsize) + vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1)) +@@ -1859,6 +1873,17 @@ static void coherency_setup(void) + * silly idea of putting something else there ... + */ + switch (current_cpu_type()) { ++ case CPU_BMIPS3300: ++ { ++ u32 cm; ++ cm = read_c0_diag(); ++ /* Enable icache */ ++ cm |= (1 << 31); ++ /* Enable dcache */ ++ cm |= (1 << 30); ++ write_c0_diag(cm); ++ } ++ break; + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: +@@ -1905,6 +1930,15 @@ void r4k_cache_init(void) + extern void build_copy_page(void); + struct cpuinfo_mips *c = ¤t_cpu_data; + ++ /* Check if special workarounds are required */ ++#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2) ++ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) { ++ printk("Enabling BCM4710A0 cache workarounds.\n"); ++ bcm4710 = 1; ++ } else ++#endif ++ bcm4710 = 0; ++ + probe_pcache(); + probe_vcache(); + setup_scache(); +@@ -1982,7 +2016,15 @@ void r4k_cache_init(void) + */ + local_r4k___flush_cache_all(NULL); + ++#ifdef CONFIG_BCM47XX ++ { ++ static void (*_coherency_setup)(void); ++ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); ++ _coherency_setup(); ++ } ++#else + coherency_setup(); ++#endif + board_cache_error_setup = r4k_cache_error_setup; + + /* +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -967,6 +967,9 @@ void build_get_pgde32(u32 **p, unsigned + uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT); + uasm_i_addu(p, ptr, tmp, ptr); + #else ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + UASM_i_LA_mostly(p, ptr, pgdc); + #endif + uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ +@@ -1327,6 +1330,9 @@ static void build_r4000_tlb_refill_handl + #ifdef CONFIG_64BIT + build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++# endif + build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ + #endif + +@@ -1338,6 +1344,9 @@ static void build_r4000_tlb_refill_handl + build_update_entries(&p, K0, K1); + build_tlb_write_entry(&p, &l, &r, tlb_random); + uasm_l_leave(&l, p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++#endif + uasm_i_eret(&p); /* return from trap */ + } + #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT +@@ -2028,6 +2037,9 @@ build_r4000_tlbchange_handler_head(u32 * + #ifdef CONFIG_64BIT + build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++# endif + build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */ + #endif + +@@ -2074,6 +2086,9 @@ build_r4000_tlbchange_handler_tail(u32 * + build_tlb_write_entry(p, l, r, tlb_indexed); + uasm_l_leave(l, *p); + build_restore_work_registers(p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + uasm_i_eret(p); /* return from trap */ + + #ifdef CONFIG_64BIT diff --git a/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch new file mode 100644 index 0000000000..f7f4d3eaa5 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/160-kmap_coherent.patch @@ -0,0 +1,78 @@ +From: Jeff Hansen +Subject: [PATCH] kmap_coherent + +On ASUS WL-500gP there are some "Data bus error"s when executing simple +commands liks "ps" or "cat /proc/1/cmdline". + +This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485 +--- +--- a/arch/mips/include/asm/cpu-features.h ++++ b/arch/mips/include/asm/cpu-features.h +@@ -226,6 +226,9 @@ + #ifndef cpu_has_local_ebase + #define cpu_has_local_ebase 1 + #endif ++#ifndef cpu_use_kmap_coherent ++#define cpu_use_kmap_coherent 1 ++#endif + + /* + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors +--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h ++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h +@@ -80,4 +80,6 @@ + #define cpu_scache_line_size() 0 + #define cpu_has_vz 0 + ++#define cpu_use_kmap_coherent 0 ++ + #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -672,7 +672,7 @@ static inline void local_r4k_flush_cache + map_coherent = (cpu_has_dc_aliases && + page_mapcount(page) && + !Page_dcache_dirty(page)); +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + vaddr = kmap_coherent(page, addr); + else + vaddr = kmap_atomic(page); +@@ -697,7 +697,7 @@ static inline void local_r4k_flush_cache + } + + if (vaddr) { +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + kunmap_coherent(); + else + kunmap_atomic(vaddr); +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -168,7 +168,7 @@ void copy_user_highpage(struct page *to, + void *vfrom, *vto; + + vto = kmap_atomic(to); +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapcount(from) && !Page_dcache_dirty(from)) { + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); +@@ -190,7 +190,7 @@ void copy_to_user_page(struct vm_area_st + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapcount(page) && !Page_dcache_dirty(page)) { + void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); +@@ -208,7 +208,7 @@ void copy_from_user_page(struct vm_area_ + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapcount(page) && !Page_dcache_dirty(page)) { + void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); diff --git a/target/linux/brcm47xx/patches-4.19/161-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch b/target/linux/brcm47xx/patches-4.19/161-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch new file mode 100644 index 0000000000..4a1a4d532a --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/161-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch @@ -0,0 +1,39 @@ +From 17cb62255ef8f6b6ac270024204a8fa65537b333 Mon Sep 17 00:00:00 2001 +From: Tuomas Tynkkynen +Date: Sun, 19 Aug 2018 21:23:14 +0300 +Subject: [PATCH] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3 + +Setting GPIO 21 high seems to be required to enable power to USB ports +on the WNDR3400v3. As there is already similar code for WNR3500L, +make the existing USB power GPIO code generic and use that. + +Signed-off-by: Tuomas Tynkkynen +--- + arch/mips/bcm47xx/workarounds.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/arch/mips/bcm47xx/workarounds.c ++++ b/arch/mips/bcm47xx/workarounds.c +@@ -5,9 +5,8 @@ + #include + #include + +-static void __init bcm47xx_workarounds_netgear_wnr3500l(void) ++static void __init bcm47xx_workarounds_enable_usb_power(int usb_power) + { +- const int usb_power = 12; + int err; + + err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power"); +@@ -23,7 +22,10 @@ void __init bcm47xx_workarounds(void) + + switch (board) { + case BCM47XX_BOARD_NETGEAR_WNR3500L: +- bcm47xx_workarounds_netgear_wnr3500l(); ++ bcm47xx_workarounds_enable_usb_power(12); ++ break; ++ case BCM47XX_BOARD_NETGEAR_WNDR3400_V3: ++ bcm47xx_workarounds_enable_usb_power(21); + break; + default: + /* No workaround(s) needed */ diff --git a/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch b/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch new file mode 100644 index 0000000000..3706591b00 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/209-b44-register-adm-switch.patch @@ -0,0 +1,121 @@ +From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sat, 9 Nov 2013 17:03:59 +0100 +Subject: [PATCH 210/210] b44: register adm switch + +--- + drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++ + drivers/net/ethernet/broadcom/b44.h | 3 ++ + 2 files changed, 60 insertions(+) + +--- a/drivers/net/ethernet/broadcom/b44.c ++++ b/drivers/net/ethernet/broadcom/b44.c +@@ -31,6 +31,8 @@ + #include + #include + #include ++#include ++#include + + #include + #include +@@ -2246,6 +2248,69 @@ static void b44_adjust_link(struct net_d + } + } + ++#ifdef CONFIG_BCM47XX ++static int b44_register_adm_switch(struct b44 *bp) ++{ ++ int gpio; ++ struct platform_device *pdev; ++ struct adm6996_gpio_platform_data adm_data = {0}; ++ struct platform_device_info info = {0}; ++ ++ adm_data.model = ADM6996L; ++ gpio = bcm47xx_nvram_gpio_pin("adm_eecs"); ++ if (gpio >= 0) ++ adm_data.eecs = gpio; ++ else ++ adm_data.eecs = 2; ++ ++ gpio = bcm47xx_nvram_gpio_pin("adm_eesk"); ++ if (gpio >= 0) ++ adm_data.eesk = gpio; ++ else ++ adm_data.eesk = 3; ++ ++ gpio = bcm47xx_nvram_gpio_pin("adm_eedi"); ++ if (gpio >= 0) ++ adm_data.eedi = gpio; ++ else ++ adm_data.eedi = 4; ++ ++ /* ++ * We ignore the "adm_rc" GPIO here. The driver does not use it, ++ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1. ++ */ ++ ++ info.parent = bp->sdev->dev; ++ info.name = "adm6996_gpio"; ++ info.id = -1; ++ info.data = &adm_data; ++ info.size_data = sizeof(adm_data); ++ ++ if (!bp->adm_switch) { ++ pdev = platform_device_register_full(&info); ++ if (IS_ERR(pdev)) ++ return PTR_ERR(pdev); ++ ++ bp->adm_switch = pdev; ++ } ++ return 0; ++} ++static void b44_unregister_adm_switch(struct b44 *bp) ++{ ++ if (bp->adm_switch) ++ platform_device_unregister(bp->adm_switch); ++} ++#else ++static int b44_register_adm_switch(struct b44 *bp) ++{ ++ return 0; ++} ++static void b44_unregister_adm_switch(struct b44 *bp) ++{ ++ ++} ++#endif /* CONFIG_BCM47XX */ ++ + static int b44_register_phy_one(struct b44 *bp) + { + struct mii_bus *mii_bus; +@@ -2281,6 +2346,9 @@ static int b44_register_phy_one(struct b + if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) && + (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) { + ++ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM) ++ b44_register_adm_switch(bp); ++ + dev_info(sdev->dev, + "could not find PHY at %i, use fixed one\n", + bp->phy_addr); +@@ -2475,6 +2543,7 @@ static void b44_remove_one(struct ssb_de + unregister_netdev(dev); + if (bp->flags & B44_FLAG_EXTERNAL_PHY) + b44_unregister_phy_one(bp); ++ b44_unregister_adm_switch(bp); + ssb_device_disable(sdev, 0); + ssb_bus_may_powerdown(sdev->bus); + netif_napi_del(&bp->napi); +--- a/drivers/net/ethernet/broadcom/b44.h ++++ b/drivers/net/ethernet/broadcom/b44.h +@@ -408,6 +408,9 @@ struct b44 { + struct mii_bus *mii_bus; + int old_link; + struct mii_if_info mii_if; ++ ++ /* platform device for associated switch */ ++ struct platform_device *adm_switch; + }; + + #endif /* _B44_H */ diff --git a/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch new file mode 100644 index 0000000000..51e4b8c5ae --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/210-b44_phy_fix.patch @@ -0,0 +1,54 @@ +--- a/drivers/net/ethernet/broadcom/b44.c ++++ b/drivers/net/ethernet/broadcom/b44.c +@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru + error: + pr_warn("PHY: cannot reset MII transceiver isolate bit\n"); + } ++ ++static void b44_bcm47xx_workarounds(struct b44 *bp) ++{ ++ char buf[20]; ++ struct ssb_device *sdev = bp->sdev; ++ ++ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */ ++ if (sdev->bus->sprom.board_num == 100) { ++ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY; ++ } else { ++ /* WL-HDD */ ++ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 && ++ !strncmp(buf, "WL300-", strlen("WL300-"))) { ++ if (sdev->bus->sprom.et0phyaddr == 0 && ++ sdev->bus->sprom.et1phyaddr == 1) ++ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY; ++ } ++ } ++ return; ++} + #else + static inline void b44_wap54g10_workaround(struct b44 *bp) + { + } ++ ++static inline void b44_bcm47xx_workarounds(struct b44 *bp) ++{ ++} + #endif + + static int b44_setup_phy(struct b44 *bp) +@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp) + int err; + + b44_wap54g10_workaround(bp); ++ b44_bcm47xx_workarounds(bp); + + if (bp->flags & B44_FLAG_EXTERNAL_PHY) + return 0; +@@ -2176,6 +2201,8 @@ static int b44_get_invariants(struct b44 + * valid PHY address. */ + bp->phy_addr &= 0x1F; + ++ b44_bcm47xx_workarounds(bp); ++ + memcpy(bp->dev->dev_addr, addr, ETH_ALEN); + + if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ diff --git a/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch new file mode 100644 index 0000000000..a1c988bb59 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/280-activate_ssb_support_in_usb.patch @@ -0,0 +1,25 @@ +This prevents the options from being delete with make kernel_oldconfig. +--- + drivers/ssb/Kconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -32,6 +32,7 @@ config BCMA_HOST_PCI + config BCMA_HOST_SOC + bool "Support for BCMA in a SoC" + depends on HAS_IOMEM ++ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD + help + Host interface for a Broadcom AIX bus directly mapped into + the memory. This only works with the Broadcom SoCs from the +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -135,6 +135,7 @@ config SSB_SFLASH + config SSB_EMBEDDED + bool + depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE ++ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD + default y + + config SSB_DRIVER_EXTIF diff --git a/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch new file mode 100644 index 0000000000..b5efaaf03c --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/300-fork_cacheflush.patch @@ -0,0 +1,21 @@ +From: Wolfram Joost +Subject: [PATCH] fork_cacheflush + +On ASUS WL-500gP there are many unexpected "Segmentation fault"s that +seem to be caused by a kernel. They can be avoided by: +1) Disabling highpage +2) Using flush_cache_mm in flush_cache_dup_mm + +For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035 +--- +--- a/arch/mips/include/asm/cacheflush.h ++++ b/arch/mips/include/asm/cacheflush.h +@@ -47,7 +47,7 @@ + extern void (*flush_cache_all)(void); + extern void (*__flush_cache_all)(void); + extern void (*flush_cache_mm)(struct mm_struct *mm); +-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) ++#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + extern void (*flush_cache_range)(struct vm_area_struct *vma, + unsigned long start, unsigned long end); + extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch b/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch new file mode 100644 index 0000000000..09bfc64552 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/310-no_highpage.patch @@ -0,0 +1,74 @@ +From: Jeff Hansen +Subject: [PATCH] no highpage + +On ASUS WL-500gP there are many unexpected "Segmentation fault"s that +seem to be caused by a kernel. They can be avoided by: +1) Disabling highpage +2) Using flush_cache_mm in flush_cache_dup_mm + +For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035 +--- +--- a/arch/mips/include/asm/page.h ++++ b/arch/mips/include/asm/page.h +@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl + #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ + + #include ++#include + + extern void build_clear_page(void); + extern void build_copy_page(void); +@@ -110,11 +111,16 @@ static inline void clear_user_page(void + flush_data_cache_page((unsigned long)addr); + } + +-struct vm_area_struct; +-extern void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma); ++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, ++ struct page *to) ++{ ++ extern void (*flush_data_cache_page)(unsigned long addr); + +-#define __HAVE_ARCH_COPY_USER_HIGHPAGE ++ copy_page(vto, vfrom); ++ if (!cpu_has_ic_fills_f_dc || ++ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) ++ flush_data_cache_page((unsigned long)vto); ++} + + /* + * These are used to make use of C type-checking.. +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -162,30 +162,6 @@ void kunmap_coherent(void) + preempt_enable(); + } + +-void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma) +-{ +- void *vfrom, *vto; +- +- vto = kmap_atomic(to); +- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && +- page_mapcount(from) && !Page_dcache_dirty(from)) { +- vfrom = kmap_coherent(from, vaddr); +- copy_page(vto, vfrom); +- kunmap_coherent(); +- } else { +- vfrom = kmap_atomic(from); +- copy_page(vto, vfrom); +- kunmap_atomic(vfrom); +- } +- if ((!cpu_has_ic_fills_f_dc) || +- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) +- flush_data_cache_page((unsigned long)vto); +- kunmap_atomic(vto); +- /* Make sure this page is cleared on other CPU's too before using it */ +- smp_wmb(); +-} +- + void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) diff --git a/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch b/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch new file mode 100644 index 0000000000..74060e2181 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch @@ -0,0 +1,185 @@ +--- a/arch/mips/bcm47xx/board.c ++++ b/arch/mips/bcm47xx/board.c +@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_ + {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"}, + {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"}, +@@ -160,9 +161,12 @@ struct bcm47xx_board_type_list1 bcm47xx_ + {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"}, + {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"}, + {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"}, ++ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"}, ++ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"}, ++ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"}, +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -27,6 +27,12 @@ + /* Asus */ + + static const struct gpio_keys_button ++bcm47xx_buttons_asus_rtn10u[] __initconst = { ++ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(21, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button + bcm47xx_buttons_asus_rtn12[] __initconst = { + BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), + BCM47XX_GPIO_KEY(1, KEY_RESTART), +@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in + }; + + static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(8, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button + bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = { + BCM47XX_GPIO_KEY(5, KEY_WIMAX), + BCM47XX_GPIO_KEY(6, KEY_RESTART), +@@ -385,6 +403,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __ + /* Netgear */ + + static const struct gpio_keys_button ++bcm47xx_buttons_netgear_r6300_v1[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = { ++ BCM47XX_GPIO_KEY(12, KEY_RESTART), ++ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button + bcm47xx_buttons_netgear_wndr3400v1[] __initconst = { + BCM47XX_GPIO_KEY(4, KEY_RESTART), + BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON), +@@ -471,6 +500,9 @@ int __init bcm47xx_buttons_register(void + int err; + + switch (board) { ++ case BCM47XX_BOARD_ASUS_RTN10U: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u); ++ break; + case BCM47XX_BOARD_ASUS_RTN12: + err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12); + break; +@@ -601,6 +633,12 @@ int __init bcm47xx_buttons_register(void + case BCM47XX_BOARD_LINKSYS_WRT310NV1: + err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1); + break; ++ case BCM47XX_BOARD_LINKSYS_WRT310NV2: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT320N_V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1); ++ break; + case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: + err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2); + break; +@@ -664,6 +702,12 @@ int __init bcm47xx_buttons_register(void + err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3); + break; + ++ case BCM47XX_BOARD_NETGEAR_R6300_V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1); ++ break; ++ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1); ++ break; + case BCM47XX_BOARD_NETGEAR_WNDR3400V1: + err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1); + break; +--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h +@@ -72,6 +72,7 @@ enum bcm47xx_board { + BCM47XX_BOARD_LINKSYS_WRT300NV11, + BCM47XX_BOARD_LINKSYS_WRT310NV1, + BCM47XX_BOARD_LINKSYS_WRT310NV2, ++ BCM47XX_BOARD_LINKSYS_WRT320N_V1, + BCM47XX_BOARD_LINKSYS_WRT54G3GV2, + BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, + BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, +@@ -98,9 +99,12 @@ enum bcm47xx_board { + BCM47XX_BOARD_MOTOROLA_WR850GP, + BCM47XX_BOARD_MOTOROLA_WR850GV2V3, + ++ BCM47XX_BOARD_NETGEAR_R6300_V1, + BCM47XX_BOARD_NETGEAR_WGR614V8, + BCM47XX_BOARD_NETGEAR_WGR614V9, + BCM47XX_BOARD_NETGEAR_WGR614_V10, ++ BCM47XX_BOARD_NETGEAR_WN2500RP_V1, ++ BCM47XX_BOARD_NETGEAR_WN2500RP_V2, + BCM47XX_BOARD_NETGEAR_WNDR3300, + BCM47XX_BOARD_NETGEAR_WNDR3400V1, + BCM47XX_BOARD_NETGEAR_WNDR3400V2, +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -30,6 +30,14 @@ + /* Asus */ + + static const struct gpio_led ++bcm47xx_leds_asus_rtn10u[] __initconst = { ++ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led + bcm47xx_leds_asus_rtn12[] __initconst = { + BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), + BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), +@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc + }; + + static const struct gpio_led ++bcm47xx_leds_linksys_wrt320n_v1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led + bcm47xx_leds_linksys_wrt54g_generic[] __initconst = { + BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), +@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void) + enum bcm47xx_board board = bcm47xx_board_get(); + + switch (board) { ++ case BCM47XX_BOARD_ASUS_RTN10U: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u); ++ break; + case BCM47XX_BOARD_ASUS_RTN12: + bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12); + break; +@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void) + case BCM47XX_BOARD_LINKSYS_WRT310NV1: + bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1); + break; ++ case BCM47XX_BOARD_LINKSYS_WRT320N_V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1); ++ break; + case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: + bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2); + break; diff --git a/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch new file mode 100644 index 0000000000..df9d434c9f --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/400-mtd-bcm47xxpart-get-nvram.patch @@ -0,0 +1,34 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_ + int trx_num = 0; /* Number of found TRX partitions */ + int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; + int err; ++ bool found_nvram = false; + + /* + * Some really old flashes (like AT45DB*) had smaller erasesize-s, but +@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_ + if (buf[0] == NVRAM_HEADER) { + bcm47xxpart_add_part(&parts[curr_part++], "nvram", + master->size - blocksize, 0); ++ found_nvram = true; + break; + } + } + + kfree(buf); + ++ if (!found_nvram) { ++ pr_err("can not find a nvram partition reserve last block\n"); ++ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess", ++ master->size - blocksize * 2, MTD_WRITEABLE); ++ for (i = 0; i < curr_part; i++) { ++ if (parts[i].size + parts[i].offset == master->size) ++ parts[i].offset -= blocksize * 2; ++ } ++ } ++ + /* + * Assume that partitions end at the beginning of the one they are + * followed by. diff --git a/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch new file mode 100644 index 0000000000..a353eec08c --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/610-pci_ide_fix.patch @@ -0,0 +1,41 @@ +From: b.sander +Subject: [PATCH] pci: IDE fix + +These are standard probing messages when using pdc202xx_old: +pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02) +PCI: Enabling device 0000:00:01.0 (0004 -> 0007) +PCI: Fixing up device 0000:00:01.0 +0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. +0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE +pdc202xx_old 0000:00:01.0: 100% native mode on irq 6 + +With the default MAX_HWIFS value after above we get: + ide2: BM-DMA at 0x0400-0x0407 + ide3: BM-DMA at 0x0408-0x040f +Probing IDE interface ide2... +hde: CF500, CFA DISK drive + +As you can see it's ide2 + ide3 and hde. + +With this patch applied we get: + ide0: BM-DMA at 0x0400-0x0407 + ide1: BM-DMA at 0x0408-0x040f +Probing IDE interface ide0... +hda: CF500, CFA DISK drive + +This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061 +--- +--- a/include/linux/ide.h ++++ b/include/linux/ide.h +@@ -235,7 +235,11 @@ static inline void ide_std_init_ports(st + hw->io_ports.ctl_addr = ctl_addr; + } + ++#if defined CONFIG_BCM47XX ++# define MAX_HWIFS 2 ++#else + #define MAX_HWIFS 10 ++#endif + + /* + * Now for the data we need to maintain per-drive: ide_drive_t diff --git a/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch b/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch new file mode 100644 index 0000000000..31c87b38c5 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/791-tg3-no-pci-sleep.patch @@ -0,0 +1,17 @@ +When the Ethernet controller is powered down and someone wants to +access the mdio bus like the witch driver (b53) the system crashed if +PCI_D3hot was set before. This patch deactivates this power sawing mode +when a switch driver is in use. + +--- a/drivers/net/ethernet/broadcom/tg3.c ++++ b/drivers/net/ethernet/broadcom/tg3.c +@@ -4279,7 +4279,8 @@ static int tg3_power_down_prepare(struct + static void tg3_power_down(struct tg3 *tp) + { + pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE)); +- pci_set_power_state(tp->pdev, PCI_D3hot); ++ if (!tg3_flag(tp, ROBOSWITCH)) ++ pci_set_power_state(tp->pdev, PCI_D3hot); + } + + static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex) diff --git a/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch new file mode 100644 index 0000000000..318dc55810 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch @@ -0,0 +1,73 @@ +From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 20 Nov 2014 21:32:42 +0100 +Subject: [PATCH] bcma: add table of serial flashes with smaller blocks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +--- a/drivers/bcma/driver_chipcommon_sflash.c ++++ b/drivers/bcma/driver_chipcommon_sflash.c +@@ -9,6 +9,7 @@ + + #include + #include ++#include + + static struct resource bcma_sflash_resource = { + .name = "bcma_sflash", +@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc + { NULL }, + }; + ++/* Some devices use smaller blocks (and have more of them) */ ++static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = { ++ { "M25P16", 0x14, 0x1000, 512, }, ++ { "M25P32", 0x15, 0x1000, 1024, }, ++ { NULL }, ++}; ++ + static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, +@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_ + bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); + } + ++const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ const struct bcma_sflash_tbl_e *e; ++ ++ switch (board) { ++ case BCM47XX_BOARD_NETGEAR_WGR614_V10: ++ case BCM47XX_BOARD_NETGEAR_WNR1000_V3: ++ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) { ++ if (e->id == id) ++ return e; ++ } ++ return NULL; ++ default: ++ return NULL; ++ } ++} ++ + /* Initialize serial flash access */ + int bcma_sflash_init(struct bcma_drv_cc *cc) + { +@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc + case 0x13: + return -ENOTSUPP; + default: ++ e = bcma_sflash_shrink_flash(id); ++ if (e) ++ break; ++ + for (e = bcma_sflash_st_tbl; e->name; e++) { + if (e->id == id) + break; diff --git a/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch new file mode 100644 index 0000000000..aaab39ae41 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/820-wgt634u-nvram-fix.patch @@ -0,0 +1,304 @@ +The Netgear wgt634u uses a different format for storing the +configuration. This patch is needed to read out the correct +configuration. The cfe_env.c file uses a different method way to read +out the configuration than the in kernel cfe config reader. + +--- a/drivers/firmware/broadcom/Makefile ++++ b/drivers/firmware/broadcom/Makefile +@@ -1,2 +1,2 @@ +-obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o ++obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o + obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o +--- /dev/null ++++ b/drivers/firmware/broadcom/cfe_env.c +@@ -0,0 +1,228 @@ ++/* ++ * CFE environment variable access ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2006, Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define NVRAM_SIZE (0x1ff0) ++static char _nvdata[NVRAM_SIZE]; ++static char _valuestr[256]; ++ ++/* ++ * TLV types. These codes are used in the "type-length-value" ++ * encoding of the items stored in the NVRAM device (flash or EEPROM) ++ * ++ * The layout of the flash/nvram is as follows: ++ * ++ * ++ * ++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. ++ * The "length" field marks the length of the data section, not ++ * including the type and length fields. ++ * ++ * Environment variables are stored as follows: ++ * ++ * = ++ * ++ * If bit 0 (low bit) is set, the length is an 8-bit value. ++ * If bit 0 (low bit) is clear, the length is a 16-bit value ++ * ++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still ++ * indicates the size of the length field. ++ * ++ * Flags are from the constants below: ++ * ++ */ ++#define ENV_LENGTH_16BITS 0x00 /* for low bit */ ++#define ENV_LENGTH_8BITS 0x01 ++ ++#define ENV_TYPE_USER 0x80 ++ ++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) ++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) ++ ++/* ++ * The actual TLV types we support ++ */ ++ ++#define ENV_TLV_TYPE_END 0x00 ++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) ++ ++/* ++ * Environment variable flags ++ */ ++ ++#define ENV_FLG_NORMAL 0x00 /* normal read/write */ ++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ ++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ ++ ++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ ++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ ++ ++ ++/* ********************************************************************* ++ * _nvram_read(buffer,offset,length) ++ * ++ * Read data from the NVRAM device ++ * ++ * Input parameters: ++ * buffer - destination buffer ++ * offset - offset of data to read ++ * length - number of bytes to read ++ * ++ * Return value: ++ * number of bytes read, or <0 if error occured ++ ********************************************************************* */ ++static int ++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) ++{ ++ int i; ++ if (offset > NVRAM_SIZE) ++ return -1; ++ ++ for ( i = 0; i < length; i++) { ++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; ++ } ++ return length; ++} ++ ++ ++static char* ++_strnchr(const char *dest,int c,size_t cnt) ++{ ++ while (*dest && (cnt > 0)) { ++ if (*dest == c) return (char *) dest; ++ dest++; ++ cnt--; ++ } ++ return NULL; ++} ++ ++ ++ ++/* ++ * Core support API: Externally visible. ++ */ ++ ++/* ++ * Get the value of an NVRAM variable ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++ ++char *cfe_env_get(unsigned char *nv_buf, const char *name) ++{ ++ int size; ++ unsigned char *buffer; ++ unsigned char *ptr; ++ unsigned char *envval; ++ unsigned int reclen; ++ unsigned int rectype; ++ int offset; ++ int flg; ++ ++ if (!strcmp(name, "nvram_type")) ++ return "cfe"; ++ ++ size = NVRAM_SIZE; ++ buffer = &_nvdata[0]; ++ ++ ptr = buffer; ++ offset = 0; ++ ++ /* Read the record type and length */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ ++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { ++ ++ /* Adjust pointer for TLV type */ ++ rectype = *(ptr); ++ offset++; ++ size--; ++ ++ /* ++ * Read the length. It can be either 1 or 2 bytes ++ * depending on the code ++ */ ++ if (rectype & ENV_LENGTH_8BITS) { ++ /* Read the record type and length - 8 bits */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ reclen = *(ptr); ++ size--; ++ offset++; ++ } ++ else { ++ /* Read the record type and length - 16 bits, MSB first */ ++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { ++ goto error; ++ } ++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); ++ size -= 2; ++ offset += 2; ++ } ++ ++ if (reclen > size) ++ break; /* should not happen, bad NVRAM */ ++ ++ switch (rectype) { ++ case ENV_TLV_TYPE_ENV: ++ /* Read the TLV data */ ++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) ++ goto error; ++ flg = *ptr++; ++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); ++ if (envval) { ++ *envval++ = '\0'; ++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); ++ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; ++#if 0 ++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); ++#endif ++ if(!strcmp(ptr, name)){ ++ return _valuestr; ++ } ++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) ++ return _valuestr; ++ } ++ break; ++ ++ default: ++ /* Unknown TLV type, skip it. */ ++ break; ++ } ++ ++ /* ++ * Advance to next TLV ++ */ ++ ++ size -= (int)reclen; ++ offset += reclen; ++ ++ /* Read the next record type */ ++ ptr = buffer; ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) ++ goto error; ++ } ++ ++error: ++ return NULL; ++ ++} ++ +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -37,6 +37,8 @@ struct nvram_header { + static char nvram_buf[NVRAM_SPACE]; + static size_t nvram_len; + static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; ++static int cfe_env; ++extern char *cfe_env_get(char *nv_buf, const char *name); + + static u32 find_nvram_size(void __iomem *end) + { +@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem + static int nvram_find_and_copy(void __iomem *iobase, u32 lim) + { + struct nvram_header __iomem *header; ++ int i; + u32 off; ++ u32 *src, *dst; + u32 size; + + if (nvram_len) { +@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io + return -EEXIST; + } + ++ cfe_env = 0; ++ ++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ ++ if (lim >= 8 * 1024 * 1024) { ++ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000); ++ dst = (u32 *)nvram_buf; ++ ++ if ((*src & 0xff00ff) == 0x000001) { ++ printk("early_nvram_init: WGT634U NVRAM found.\n"); ++ ++ for (i = 0; i < 0x1ff0; i++) { ++ if (*src == 0xFFFFFFFF) ++ break; ++ *dst++ = *src++; ++ } ++ cfe_env = 1; ++ return 0; ++ } ++ } ++ + /* TODO: when nvram is on nand flash check for bad blocks first. */ + off = FLASH_MIN; + while (off <= lim) { +@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam + if (!name) + return -EINVAL; + ++ if (cfe_env) { ++ value = cfe_env_get(nvram_buf, name); ++ if (!value) ++ return -ENOENT; ++ return snprintf(val, val_len, "%s", value); ++ } ++ + if (!nvram_len) { + err = nvram_init(); + if (err) diff --git a/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch new file mode 100644 index 0000000000..309c2172b8 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/830-huawei_e970_support.patch @@ -0,0 +1,101 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f + .duplex = DUPLEX_FULL, + }; + ++static struct gpio_wdt_platform_data gpio_wdt_data; ++ ++static struct platform_device gpio_wdt_device = { ++ .name = "gpio-wdt", ++ .id = 0, ++ .dev = { ++ .platform_data = &gpio_wdt_data, ++ }, ++}; ++ ++static int __init bcm47xx_register_gpio_watchdog(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ ++ switch (board) { ++ case BCM47XX_BOARD_HUAWEI_E970: ++ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n"); ++ gpio_wdt_data.gpio = 7; ++ gpio_wdt_data.interval = HZ; ++ gpio_wdt_data.first_interval = HZ / 5; ++ return platform_device_register(&gpio_wdt_device); ++ default: ++ /* Nothing to do */ ++ return 0; ++ } ++} ++ + static int __init bcm47xx_register_bus_complete(void) + { + switch (bcm47xx_bus_type) { +@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c + bcm47xx_workarounds(); + + fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1); ++ bcm47xx_register_gpio_watchdog(); + return 0; + } + device_initcall(bcm47xx_register_bus_complete); +--- a/arch/mips/configs/bcm47xx_defconfig ++++ b/arch/mips/configs/bcm47xx_defconfig +@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y + CONFIG_GPIO_SYSFS=y + CONFIG_WATCHDOG=y + CONFIG_BCM47XX_WDT=y ++CONFIG_GPIO_WDT=y + CONFIG_SSB_DRIVER_GIGE=y + CONFIG_BCMA_DRIVER_GMAC_CMN=y + CONFIG_USB=y +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu + } + EXPORT_SYMBOL(ssb_watchdog_timer_set); + ++#ifdef CONFIG_BCM47XX ++#include ++ ++static bool ssb_watchdog_supported(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ ++ /* The Huawei E970 has a hardware watchdog using a GPIO */ ++ switch (board) { ++ case BCM47XX_BOARD_HUAWEI_E970: ++ return false; ++ default: ++ return true; ++ } ++} ++#else ++static bool ssb_watchdog_supported(void) ++{ ++ return true; ++} ++#endif ++ + int ssb_watchdog_register(struct ssb_bus *bus) + { + struct bcm47xx_wdt wdt = {}; + struct platform_device *pdev; + ++ if (!ssb_watchdog_supported()) ++ return 0; ++ + if (ssb_chipco_available(&bus->chipco)) { + wdt.driver_data = &bus->chipco; + wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt; diff --git a/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch b/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch new file mode 100644 index 0000000000..ddac7917ea --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch @@ -0,0 +1,360 @@ +This generic GPIO watchdog is used on Huawei E970 (brcm47xx) + +Signed-off-by: Mathias Adam + +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1497,6 +1497,15 @@ config WDT_MTX1 + Hardware driver for the MTX-1 boards. This is a watchdog timer that + will reboot the machine after a 100 seconds timer expired. + ++config GPIO_WDT ++ tristate "GPIO Hardware Watchdog" ++ help ++ Hardware driver for GPIO-controlled watchdogs. GPIO pin and ++ toggle interval settings are platform-specific. The driver ++ will stop toggling the GPIO (i.e. machine reboots) after a ++ 100 second timer expired and no process has written to ++ /dev/watchdog during that time. ++ + config PNX833X_WDT + tristate "PNX833x Hardware Watchdog" + depends on SOC_PNX8335 +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -154,6 +154,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt + obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o + obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o ++obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o + obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o +--- /dev/null ++++ b/drivers/watchdog/old_gpio_wdt.c +@@ -0,0 +1,301 @@ ++/* ++ * Driver for GPIO-controlled Hardware Watchdogs. ++ * ++ * Copyright (C) 2013 Mathias Adam ++ * ++ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog): ++ * ++ * (C) Copyright 2005 4G Systems , ++ * All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systems admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems ++ * ++ * Release 0.01. ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * Release 0.02. ++ * Author: Florian Fainelli florian@openwrt.org ++ * use the Linux watchdog/timer APIs ++ * ++ * Release 0.03. ++ * Author: Mathias Adam ++ * make it a generic gpio watchdog driver ++ * ++ * The Watchdog is configured to reset the MTX-1 ++ * if it is not triggered for 100 seconds. ++ * It should not be triggered more often than 1.6 seconds. ++ * ++ * A timer triggers the watchdog every 5 seconds, until ++ * it is opened for the first time. After the first open ++ * it MUST be triggered every 2..95 seconds. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static int ticks = 100 * HZ; ++ ++static struct { ++ struct completion stop; ++ spinlock_t lock; ++ int running; ++ struct timer_list timer; ++ int queue; ++ int default_ticks; ++ unsigned long inuse; ++ unsigned gpio; ++ unsigned int gstate; ++ int interval; ++ int first_interval; ++} gpio_wdt_device; ++ ++static void gpio_wdt_trigger(unsigned long unused) ++{ ++ spin_lock(&gpio_wdt_device.lock); ++ if (gpio_wdt_device.running && ticks > 0) ++ ticks -= gpio_wdt_device.interval; ++ ++ /* toggle wdt gpio */ ++ gpio_wdt_device.gstate = !gpio_wdt_device.gstate; ++ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate); ++ ++ if (gpio_wdt_device.queue && ticks > 0) ++ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval); ++ else ++ complete(&gpio_wdt_device.stop); ++ spin_unlock(&gpio_wdt_device.lock); ++} ++ ++static void gpio_wdt_reset(void) ++{ ++ ticks = gpio_wdt_device.default_ticks; ++} ++ ++ ++static void gpio_wdt_start(void) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&gpio_wdt_device.lock, flags); ++ if (!gpio_wdt_device.queue) { ++ gpio_wdt_device.queue = 1; ++ gpio_wdt_device.gstate = 1; ++ gpio_set_value(gpio_wdt_device.gpio, 1); ++ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval); ++ } ++ gpio_wdt_device.running++; ++ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags); ++} ++ ++static int gpio_wdt_stop(void) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&gpio_wdt_device.lock, flags); ++ if (gpio_wdt_device.queue) { ++ gpio_wdt_device.queue = 0; ++ gpio_wdt_device.gstate = 0; ++ gpio_set_value(gpio_wdt_device.gpio, 0); ++ } ++ ticks = gpio_wdt_device.default_ticks; ++ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags); ++ return 0; ++} ++ ++/* Filesystem functions */ ++ ++static int gpio_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(0, &gpio_wdt_device.inuse)) ++ return -EBUSY; ++ return nonseekable_open(inode, file); ++} ++ ++ ++static int gpio_wdt_release(struct inode *inode, struct file *file) ++{ ++ clear_bit(0, &gpio_wdt_device.inuse); ++ return 0; ++} ++ ++static long gpio_wdt_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ void __user *argp = (void __user *)arg; ++ int __user *p = (int __user *)argp; ++ unsigned int value; ++ static const struct watchdog_info ident = { ++ .options = WDIOF_CARDRESET, ++ .identity = "GPIO WDT", ++ }; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ if (copy_to_user(argp, &ident, sizeof(ident))) ++ return -EFAULT; ++ break; ++ case WDIOC_GETSTATUS: ++ case WDIOC_GETBOOTSTATUS: ++ put_user(0, p); ++ break; ++ case WDIOC_SETOPTIONS: ++ if (get_user(value, p)) ++ return -EFAULT; ++ if (value & WDIOS_ENABLECARD) ++ gpio_wdt_start(); ++ else if (value & WDIOS_DISABLECARD) ++ gpio_wdt_stop(); ++ else ++ return -EINVAL; ++ return 0; ++ case WDIOC_KEEPALIVE: ++ gpio_wdt_reset(); ++ break; ++ default: ++ return -ENOTTY; ++ } ++ return 0; ++} ++ ++ ++static ssize_t gpio_wdt_write(struct file *file, const char *buf, ++ size_t count, loff_t *ppos) ++{ ++ if (!count) ++ return -EIO; ++ gpio_wdt_reset(); ++ return count; ++} ++ ++static const struct file_operations gpio_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .unlocked_ioctl = gpio_wdt_ioctl, ++ .open = gpio_wdt_open, ++ .write = gpio_wdt_write, ++ .release = gpio_wdt_release, ++}; ++ ++ ++static struct miscdevice gpio_wdt_misc = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &gpio_wdt_fops, ++}; ++ ++ ++static int gpio_wdt_probe(struct platform_device *pdev) ++{ ++ int ret; ++ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data; ++ ++ gpio_wdt_device.gpio = gpio_wdt_data->gpio; ++ gpio_wdt_device.interval = gpio_wdt_data->interval; ++ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval; ++ if (gpio_wdt_device.first_interval <= 0) { ++ gpio_wdt_device.first_interval = gpio_wdt_device.interval; ++ } ++ ++ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt"); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to request gpio"); ++ return ret; ++ } ++ ++ spin_lock_init(&gpio_wdt_device.lock); ++ init_completion(&gpio_wdt_device.stop); ++ gpio_wdt_device.queue = 0; ++ clear_bit(0, &gpio_wdt_device.inuse); ++ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L); ++ gpio_wdt_device.default_ticks = ticks; ++ ++ gpio_wdt_start(); ++ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n", ++ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval); ++ return 0; ++} ++ ++static int gpio_wdt_remove(struct platform_device *pdev) ++{ ++ /* FIXME: do we need to lock this test ? */ ++ if (gpio_wdt_device.queue) { ++ gpio_wdt_device.queue = 0; ++ wait_for_completion(&gpio_wdt_device.stop); ++ } ++ ++ gpio_free(gpio_wdt_device.gpio); ++ misc_deregister(&gpio_wdt_misc); ++ return 0; ++} ++ ++static struct platform_driver gpio_wdt_driver = { ++ .probe = gpio_wdt_probe, ++ .remove = gpio_wdt_remove, ++ .driver.name = "gpio-wdt", ++ .driver.owner = THIS_MODULE, ++}; ++ ++static int __init gpio_wdt_init(void) ++{ ++ return platform_driver_register(&gpio_wdt_driver); ++} ++arch_initcall(gpio_wdt_init); ++ ++/* ++ * We do wdt initialization in two steps: arch_initcall probes the wdt ++ * very early to start pinging the watchdog (misc devices are not yet ++ * available), and later module_init() just registers the misc device. ++ */ ++static int gpio_wdt_init_late(void) ++{ ++ int ret; ++ ++ ret = misc_register(&gpio_wdt_misc); ++ if (ret < 0) { ++ pr_err("GPIO_WDT: failed to register misc device\n"); ++ return ret; ++ } ++ return 0; ++} ++#ifndef MODULE ++module_init(gpio_wdt_init_late); ++#endif ++ ++static void __exit gpio_wdt_exit(void) ++{ ++ platform_driver_unregister(&gpio_wdt_driver); ++} ++module_exit(gpio_wdt_exit); ++ ++MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam"); ++MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); ++MODULE_ALIAS("platform:gpio-wdt"); +--- /dev/null ++++ b/include/linux/old_gpio_wdt.h +@@ -0,0 +1,21 @@ ++/* ++ * Definitions for the GPIO watchdog driver ++ * ++ * Copyright (C) 2013 Mathias Adam ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef _GPIO_WDT_H_ ++#define _GPIO_WDT_H_ ++ ++struct gpio_wdt_platform_data { ++ int gpio; /* GPIO line number */ ++ int interval; /* watchdog reset interval in system ticks */ ++ int first_interval; /* first wd reset interval in system ticks */ ++}; ++ ++#endif /* _GPIO_WDT_H_ */ diff --git a/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch new file mode 100644 index 0000000000..6b7ee06e50 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch @@ -0,0 +1,30 @@ +From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 8 Apr 2015 06:58:11 +0200 +Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +If SoC has a CardBus we can set resources of device at slot 1 only. It's +impossigle to set bridge resources as it simply overwrites device 1 +configuration and usually results in Data bus error-s. + +Signed-off-by: Rafał Miłecki +--- + drivers/ssb/driver_pcicore.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; ++ /* CardBus SoCs allow configuring dev 1 resources only */ ++ if (extpci_core->cardbusmode && dev != 1 && ++ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5) ++ goto out; + addr = get_cfgspace_addr(pc, bus, dev, func, off); + if (unlikely(!addr)) + goto out; diff --git a/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch new file mode 100644 index 0000000000..f5b7bda4e6 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/940-bcm47xx-yenta.patch @@ -0,0 +1,46 @@ +--- a/drivers/pcmcia/yenta_socket.c ++++ b/drivers/pcmcia/yenta_socket.c +@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru + * Probe for usable interrupts using the force + * register to generate bogus card status events. + */ ++#ifndef CONFIG_BCM47XX ++ /* WRT54G3G does not like this */ + cb_writel(socket, CB_SOCKET_EVENT, -1); + cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); + reg = exca_readb(socket, I365_CSCINT); +@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru + } + cb_writel(socket, CB_SOCKET_MASK, 0); + exca_writeb(socket, I365_CSCINT, reg); ++#endif + + mask = probe_irq_mask(val) & 0xffff; + +@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie + else + socket->socket.irq_mask = 0; + ++ /* irq mask probing is broken for the WRT54G3G */ ++ if (socket->socket.irq_mask == 0) ++ socket->socket.irq_mask = 0x6f8; ++ + dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n", + socket->socket.irq_mask, socket->cb_irq); + } +@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d + dev_info(&dev->dev, "Socket status: %08x\n", + cb_readl(socket, CB_SOCKET_STATE)); + ++ /* Generate an interrupt on card insert/remove */ ++ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK); ++ ++ /* Set up Multifunction Routing Status Register */ ++ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */); ++ ++ /* Switch interrupts to parallelized */ ++ config_writeb(socket, 0x92, 0x64); ++ + yenta_fixup_parent_bridge(dev->subordinate); + + /* Register it with the pcmcia layer.. */ diff --git a/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch new file mode 100644 index 0000000000..99aa188374 --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/976-ssb_increase_pci_delay.patch @@ -0,0 +1,11 @@ +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st + set_io_port_base(ssb_pcicore_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ +- mdelay(10); ++ mdelay(300); + register_pci_controller(&ssb_pcicore_controller); + } + diff --git a/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch b/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch new file mode 100644 index 0000000000..2936421aff --- /dev/null +++ b/target/linux/brcm47xx/patches-4.19/999-wl_exports.patch @@ -0,0 +1,22 @@ +--- a/drivers/firmware/broadcom/bcm47xx_nvram.c ++++ b/drivers/firmware/broadcom/bcm47xx_nvram.c +@@ -34,7 +34,8 @@ struct nvram_header { + u32 config_ncdl; /* ncdl values for memc */ + }; + +-static char nvram_buf[NVRAM_SPACE]; ++char nvram_buf[NVRAM_SPACE]; ++EXPORT_SYMBOL(nvram_buf); + static size_t nvram_len; + static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; + static int cfe_env; +--- a/arch/mips/mm/cache.c ++++ b/arch/mips/mm/cache.c +@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s + void (*_dma_cache_inv)(unsigned long start, unsigned long size); + + EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_inv); + + #endif /* CONFIG_DMA_NONCOHERENT */ +