From: Tobias Schramm Date: Wed, 1 Jan 2020 09:00:07 +0000 (+0100) Subject: ath79: add generic dtsi for Ubiquiti SW boards X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=commitdiff_plain;h=2e05d6185aca35e75f64ab63ddd822166712f6aa ath79: add generic dtsi for Ubiquiti SW boards Signed-off-by: Tobias Schramm [remove ubnt,sw compatible] Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts index d5a2b85305..c7ec5cddc0 100644 --- a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts +++ b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts @@ -1,67 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include - -#include "ar7242.dtsi" +#include "ar7242_ubnt_sw.dtsi" / { compatible = "ubnt,edgeswitch-8xp", "qca,ar7242"; model = "Ubiquiti EdgeSwitch 8XP"; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &led_usr; - led-failsafe = &led_usr; - led-running = &led_usr; - led-upgrade = &led_usr; - }; - - leds { - compatible = "gpio-leds"; - - led_usr: usr { - label = "ubnt:yellow:usr"; - gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - linux,code = ; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - gpio_spi { - compatible = "spi-gpio"; - #address-cells = <0x1>; - ranges; - - sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - - gpio_hc595: gpio_spi@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - registers-number = <2>; - spi-max-frequency = <100000>; - enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - - gpio-controller; - #gpio-cells = <2>; - }; - }; - gpio-export { compatible = "gpio-export"; @@ -163,54 +108,6 @@ }; }; -&spi { - status = "okay"; - - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x000000 0x040000>; - label = "u-boot"; - read-only; - }; - - partition@40000 { - reg = <0x040000 0x010000>; - label = "u-boot-env"; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - reg = <0x050000 0x760000>; - label = "firmware"; - }; - - partition@7b0000 { - reg = <0x7b0000 0x040000>; - label = "cfg"; - read-only; - }; - - art: partition@7f0000 { - reg = <0x7f0000 0x010000>; - label = "art"; - read-only; - }; - }; - }; -}; - &mdio0 { status = "okay"; @@ -278,29 +175,6 @@ }; }; -&usb_phy { - status = "okay"; -}; - -&usb { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - hub_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&pcie { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - ð0 { status = "okay"; @@ -314,9 +188,3 @@ full-duplex; }; }; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x6>; -}; diff --git a/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi new file mode 100644 index 0000000000..15f204729d --- /dev/null +++ b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar7242.dtsi" + +/ { + compatible = "qca,ar7242"; + model = "Ubiquiti Networks SW board"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_usr; + led-failsafe = &led_usr; + led-running = &led_usr; + led-upgrade = &led_usr; + }; + + leds { + compatible = "gpio-leds"; + + led_usr: usr { + label = "ubnt:yellow:usr"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = ; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio_spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + ranges; + + sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + gpio_hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x040000>; + label = "u-boot"; + read-only; + }; + + partition@40000 { + reg = <0x040000 0x010000>; + label = "u-boot-env"; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + reg = <0x050000 0x760000>; + label = "firmware"; + }; + + partition@7b0000 { + reg = <0x7b0000 0x040000>; + label = "cfg"; + read-only; + }; + + art: partition@7f0000 { + reg = <0x7f0000 0x010000>; + label = "art"; + read-only; + }; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&pcie { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; +};