From: Lucian Cristian Date: Fri, 8 Jun 2018 08:51:00 +0000 (+0300) Subject: ath79: add tl-mr3020-v1 support X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=commitdiff_plain;h=c8677ca89e53e3be7988d54280fce166cc894a7e ath79: add tl-mr3020-v1 support Signed-off-by: Lucian Cristian --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 80e32d9e00..0ba03b25a0 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -27,6 +27,9 @@ case "$board" in "glinet,ar150") ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt" ;; +"tplink,tl-mr3020-v1") + ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x02" + ;; "tplink,tl-wr740n-v2") ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index a2d6ab0049..8e3c9177a2 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -26,7 +26,10 @@ ath79_setup_interfaces() "glinet,ar150") ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; - + "tplink,tl-mr3020-v1") + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "0@eth0" "1:lan" + ;; "tplink,tl-wdr3600"|\ "tplink,tl-wdr4300") ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/dts/ar9331.dtsi b/target/linux/ath79/dts/ar9331.dtsi index b29c88a958..5ce755a592 100644 --- a/target/linux/ath79/dts/ar9331.dtsi +++ b/target/linux/ath79/dts/ar9331.dtsi @@ -3,4 +3,9 @@ / { compatible = "qca,ar9331"; + + ref: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; }; diff --git a/target/linux/ath79/dts/ar9331_tl-mr3020-v1.dts b/target/linux/ath79/dts/ar9331_tl-mr3020-v1.dts new file mode 100644 index 0000000000..fc8101564d --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-mr3020-v1.dts @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + model = "TP-Link TL-MR3020 V1"; + compatible = "tplink,tl-mr3020-v1", "qca,ar9331"; + + aliases { + serial0 = &uart; + led-status = &system; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + system: wps { + label = "tp-link:green:wps"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3g { + label = "tp-link:green:3g"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port>; + linux,default-trigger = "usbport"; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + button1 { + label = "sw1"; + linux,input-type = ; + linux,code = ; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + button2 { + label = "sw2"; + linux,input-type = ; + linux,code = ; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Spansion S25FL032PIF SPI flash */ + spiflash: s25sl032p@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x020000 0x3c0000>; + }; + + partition@3e0000 { + label = "config"; + reg = <0x3e0000 0x010000>; + read-only; + }; + + art: partition@3f0000 { + label = "art"; + reg = <0x3f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio1 { + status = "okay"; + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +ð1 { + status = "okay"; + phy-handle = <&phy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <1>; + switch-phy-swap = <1>; + }; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/dts/ar9331_tl_mr3020.dts b/target/linux/ath79/dts/ar9331_tl_mr3020.dts deleted file mode 100644 index 34ee805b33..0000000000 --- a/target/linux/ath79/dts/ar9331_tl_mr3020.dts +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include - -#include "ar9331.dtsi" - -/ { - model = "TP-Link TL-MR3020"; - compatible = "tplink,tl-mr3020", "qca,ar9331"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "tp-link:green:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps { - label = "tp-link:green:wps"; - gpios = <&gpio 26 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3g { - label = "tp-link:green:3g"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "wps"; - linux,code = ; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - button@1 { - label = "sw1"; - linux,code = ; - gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; - }; - - button@2 { - label = "sw2"; - linux,code = ; - gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_usb_vbus: reg_usb_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - vbus-supply = <®_usb_vbus>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Spansion S25FL032PIF SPI flash */ - spiflash: s25sl032p@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl032p", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk index f92c7d9644..1dfed48dba 100644 --- a/target/linux/ath79/image/tiny-tp-link.mk +++ b/target/linux/ath79/image/tiny-tp-link.mk @@ -11,6 +11,16 @@ define Device/tl-mr10u endef TARGET_DEVICES += tl-mr10u +define Device/tl-mr3020-v1 + $(Device/tplink-4mlzma) + ATH_SOC := ar9331 + DEVICE_TITLE := TP-LINK TL-MR3020 v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport + TPLINK_HWID := 0x30200001 + SUPPORTED_DEVICES := tplink,tl-mr3020-v1 tl-mr3020-v1 +endef +TARGET_DEVICES += tl-mr3020-v1 + define Device/tl-wr703n $(Device/tplink-4mlzma) ATH_SOC := ar9331