From: Thibaut VARÈNE Date: Sun, 29 Jul 2018 10:14:58 +0000 (+0200) Subject: ar71xx: rbspi: mark rb911L user led as active low X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fwigyori.git;a=commitdiff_plain;h=e76c048d344097b48dae90f447398549b391e4e9 ar71xx: rbspi: mark rb911L user led as active low The active_low flag was missing for the user LED. This LED is open drain (confirmed in OEM source) and open drain only makes sense for active low GPIOs. The two wireless LEDs mentioned in the comments are also #defined for future reference. Signed-off-by: Thibaut VARÈNE Tested-by: Ryan Mounce --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index ad67c6e869..4aff7df55b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -255,6 +255,8 @@ static struct gpio_led rb952_leds[] __initdata = { /* RB 962UiGS-5HacT2HnT gpios */ +#define RB962_WIFI_LED_1 1 +#define RB962_WIFI_LED_2 2 #define RB962_GPIO_POE_STATUS 2 #define RB962_GPIO_POE_POWER 3 #define RB962_GPIO_LED_USER 12 @@ -520,7 +522,7 @@ static struct platform_device rbwapgsc_phy_device = { #define RB911L_GPIO_LED_ETH 20 #define RB911L_GPIO_LED_POWER 11 #define RB911L_GPIO_LED_USER 3 -#define RB911L_GPIO_PIN_HOLE 14 /* for reference */ +#define RB911L_GPIO_PIN_HOLE 14 /* for reference, active low */ static struct gpio_led rb911l_leds[] __initdata = { { @@ -551,6 +553,7 @@ static struct gpio_led rb911l_leds[] __initdata = { .name = "rb:green:power", .gpio = RB911L_GPIO_LED_POWER, .default_state = LEDS_GPIO_DEFSTATE_ON, + .active_low = 1, .open_drain = 1, }, { .name = "rb:green:user",