openwrt/staging/wigyori.git
6 years agouboot-imx6: fix typo in nitrogen6dlXg
Luka Perkov [Thu, 26 Sep 2013 09:03:47 +0000 (09:03 +0000)]
uboot-imx6: fix typo in nitrogen6dlXg

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38205

6 years agouboot-imx6: add support for Nitrogen6x boards
Luka Perkov [Thu, 26 Sep 2013 08:36:12 +0000 (08:36 +0000)]
uboot-imx6: add support for Nitrogen6x boards

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
SVN-Revision: 38204

6 years agouboot-imx6: alphabetize wandboard variants
Luka Perkov [Thu, 26 Sep 2013 08:36:09 +0000 (08:36 +0000)]
uboot-imx6: alphabetize wandboard variants

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
SVN-Revision: 38203

6 years agoimx6: enable XZ_DEC_BCJ and XZ_DEC_ARM
Luka Perkov [Wed, 25 Sep 2013 23:35:55 +0000 (23:35 +0000)]
imx6: enable XZ_DEC_BCJ and XZ_DEC_ARM

squashfs is unable to decompress some blocks without that:

[    1.880530] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.887268] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.893889] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.900636] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.907275] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.913994] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.920631] SQUASHFS error: Unable to read page, block bc77a, size 14c50

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38202

6 years agoimx6: fix spi on gw5400-a
Luka Perkov [Wed, 25 Sep 2013 23:35:54 +0000 (23:35 +0000)]
imx6: fix spi on gw5400-a

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38201

6 years agobcm53xx: bgmac: use srab switch driver
Hauke Mehrtens [Wed, 25 Sep 2013 21:49:12 +0000 (21:49 +0000)]
bcm53xx: bgmac: use srab switch driver

use the srab switch driver on these SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38200

6 years agobcm53xx: update bgmac driver
Hauke Mehrtens [Wed, 25 Sep 2013 21:47:25 +0000 (21:47 +0000)]
bcm53xx: update bgmac driver

Update the bgmac driver with the patches already used for bcm47xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38199

6 years agokernel: b53: add Register Access Bridge Registers (SRAB) interface
Hauke Mehrtens [Wed, 25 Sep 2013 21:44:28 +0000 (21:44 +0000)]
kernel: b53: add Register Access Bridge Registers (SRAB) interface

The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38198

6 years agokernel: create firmware partition from MyLoader partition parser
Gabor Juhos [Wed, 25 Sep 2013 20:13:12 +0000 (20:13 +0000)]
kernel: create firmware partition from MyLoader partition parser

This is in preparation for sysupgrade support for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38197

6 years agoimage: generate separate jffs2 images w/o padding
Gabor Juhos [Wed, 25 Sep 2013 20:03:20 +0000 (20:03 +0000)]
image: generate separate jffs2 images w/o padding

The new root.jffs2-*-raw images can be used for firmware
images with custom padding requirements.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38196

6 years agotools/padjffs2: allow to specify extra offset
Gabor Juhos [Wed, 25 Sep 2013 20:03:19 +0000 (20:03 +0000)]
tools/padjffs2: allow to specify extra offset

This will be useful for firmware images which are
using a custom header.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38195

6 years agoavr32: optimize image generation
Gabor Juhos [Wed, 25 Sep 2013 19:32:34 +0000 (19:32 +0000)]
avr32: optimize image generation

 - remove the kernel+rootfs partitions from the MTD partition map,
 - use a temporary directory for intermediate image files,
 - append the root squashfs directly to the kernel,
 - don't hardcode uImage size in the jffs2 images,

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38194

6 years agoavr32: enable the new mtdsplit code
Gabor Juhos [Wed, 25 Sep 2013 19:32:33 +0000 (19:32 +0000)]
avr32: enable the new mtdsplit code

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38193

6 years agoar71xx: use correct board id for TL-MR3040 v2
Gabor Juhos [Wed, 25 Sep 2013 18:42:14 +0000 (18:42 +0000)]
ar71xx: use correct board id for TL-MR3040 v2

Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38192

6 years agoar71xx: add user-space support for TL-MR3040 v2
Gabor Juhos [Wed, 25 Sep 2013 18:42:11 +0000 (18:42 +0000)]
ar71xx: add user-space support for TL-MR3040 v2

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38191

6 years agoar71xx: improve kernel support for the TL-MR3040 v2
Gabor Juhos [Wed, 25 Sep 2013 18:42:10 +0000 (18:42 +0000)]
ar71xx: improve kernel support for the TL-MR3040 v2

This patch adds support for the hardware slide switch on
the TL-MR3040 v2.

Signed-off-by: Mads Hansen <d@taba.se>
[juhosg: use EV_SW instead of EV_KEY]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38190

6 years agoimx6: add support for gw51xx
Luka Perkov [Wed, 25 Sep 2013 18:07:24 +0000 (18:07 +0000)]
imx6: add support for gw51xx

The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 - i.MX6DL 512MB DDR3
 - 256MB NAND FLASH
 - 1x PCIe
 - 1x USB EHCI (to PCIe socket)
 - 1x USB OTG
 - HDMI out
 - Analog Video in
 - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38189

6 years agoimx6: add support for gw54xx
Luka Perkov [Wed, 25 Sep 2013 18:07:20 +0000 (18:07 +0000)]
imx6: add support for gw54xx

The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:

  - i.MX6Q 1GB DDR3 (standard)
  - 256MB NAND FLASH (standard)
  - 6x PCIe (3x with USB)
    - Optional expansion for additional USB/PCI based periperhals
  - 1x USB EHCI
  - 1x USB OTG
  - HDMI Audio/Video in/out
  - Analog Video in/out
  - Analog Audio in/out
  - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38188

6 years agopackage/kernel: add support for industrial-io and AD799x
Gabor Juhos [Wed, 25 Sep 2013 18:00:35 +0000 (18:00 +0000)]
package/kernel: add support for industrial-io and AD799x

Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38187

6 years agopackage/kernel: add hwmon driver for ADT7410
Gabor Juhos [Wed, 25 Sep 2013 18:00:34 +0000 (18:00 +0000)]
package/kernel: add hwmon driver for ADT7410

Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38186

6 years agopackage/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
Gabor Juhos [Wed, 25 Sep 2013 18:00:33 +0000 (18:00 +0000)]
package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk

Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38185

6 years agoimx6: update gw5400-a dts cleanup
Luka Perkov [Wed, 25 Sep 2013 17:55:38 +0000 (17:55 +0000)]
imx6: update gw5400-a dts cleanup

- remove dead code
- alphabatize

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38184

6 years agoatheros: fix kernel warning about usage of reset gpio
Gabor Juhos [Wed, 25 Sep 2013 17:51:12 +0000 (17:51 +0000)]
atheros: fix kernel warning about usage of reset gpio

During a reset the gpiolib warns about using the reset gpio
without explicit requesting it before:

[  147.930000] ------------[ cut here ]------------
[  147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc()
[  147.930000] autorequest GPIO-5
[  147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug
[  147.930000] Call Trace:
[  147.930000] [<8004e3bc>] dump_stack+0x8/0x34
[  147.930000] [<80058430>] warn_slowpath_common+0x78/0xa4
[  147.930000] [<800584e4>] warn_slowpath_fmt+0x2c/0x38
[  147.930000] [<80166f18>] gpio_ensure_requested+0x68/0xcc
[  147.930000] [<80167264>] gpio_direction_output+0xdc/0x168
[  147.930000] [<8004aba8>] ar2315_restart+0x28/0x54
[  147.930000] [<80069778>] sys_reboot+0x178/0x1c0
[  147.930000] [<80043670>] stack_done+0x20/0x40
[  147.930000]
[  147.930000] ---[ end trace 2c7a53d8549562d6 ]---

This is fixed with this patch by using another gpiolib api call
which includes the missing request.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38183

6 years agokernel/3.10: refresh all target patches
Gabor Juhos [Wed, 25 Sep 2013 17:13:24 +0000 (17:13 +0000)]
kernel/3.10: refresh all target patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38182

6 years agoramips: sync 3.10 configs
Gabor Juhos [Wed, 25 Sep 2013 16:39:23 +0000 (16:39 +0000)]
ramips: sync 3.10 configs

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38181

6 years agolantiq/3.10: unbreak the mtd-split patch
Gabor Juhos [Wed, 25 Sep 2013 16:22:04 +0000 (16:22 +0000)]
lantiq/3.10: unbreak the mtd-split patch

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38180

6 years agokernel/3.10: add upstream commit id to the backported hso patches
Gabor Juhos [Wed, 25 Sep 2013 14:38:57 +0000 (14:38 +0000)]
kernel/3.10: add upstream commit id to the backported hso patches

Also remove the internal patch numbers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38179

6 years agokernel/3.10: refresh patches
Gabor Juhos [Wed, 25 Sep 2013 14:38:56 +0000 (14:38 +0000)]
kernel/3.10: refresh patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38178

6 years agoavr32: remove 3.8 support
Gabor Juhos [Wed, 25 Sep 2013 13:34:52 +0000 (13:34 +0000)]
avr32: remove 3.8 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38175

6 years agoavr32: switch to 3.10
Gabor Juhos [Wed, 25 Sep 2013 13:34:51 +0000 (13:34 +0000)]
avr32: switch to 3.10

It works:
    _______                     ________        __
   |       |.-----.-----.-----.|  |  |  |.----.|  |_
   |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
   |_______||   __|_____|__|__||________||__|  |____|
            |__| W I R E L E S S   F R E E D O M
   -----------------------------------------------------
   BARRIER BREAKER (Bleeding Edge, r38163)
   -----------------------------------------------------
    * 1/2 oz Galliano         Pour all ingredients into
    * 4 oz cold Coffee        an irish coffee mug filled
    * 1 1/2 oz Dark Rum      with crushed ice. Stir.
    * 2 tsp. Creme de Cacao
   -----------------------------------------------------
  root@OpenWrt:/# uname -a
  Linux OpenWrt 3.10.12 #1 Tue Sep 24 18:47:12 CEST 2013 avr32 GNU/Linux
  root@OpenWrt:/# cat /proc/cpuinfo
  processor       : 0
  chip type       : AT32AP700x revision C
  cpu arch        : AVR32B revision 1
  cpu core        : AP7 revision 0
  cpu MHz         : 140.000
  i-cache         : 16K (4 ways x 128 sets x 32)
  d-cache         : 16K (4 ways x 128 sets x 32)
  features        : dsp simd ocd perfctr java
  bogomips        : 281.23
  root@OpenWrt:/#

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38174

6 years agoavr32: add support for 3.10
Gabor Juhos [Wed, 25 Sep 2013 13:33:49 +0000 (13:33 +0000)]
avr32: add support for 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38173

6 years agofeeds: enable cloning of specific git commit
Luka Perkov [Wed, 25 Sep 2013 13:02:55 +0000 (13:02 +0000)]
feeds: enable cloning of specific git commit

Following syntax should be used to enable this feature:

src-git custom git://openwrt/custom-feed^SHA_COMMIT_ID

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38172

6 years agouhttpd: fix appending https ports to cmdline
Felix Fietkau [Wed, 25 Sep 2013 07:44:48 +0000 (07:44 +0000)]
uhttpd: fix appending https ports to cmdline

Otherwise it is started only on non-secure ports.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 38171

6 years agoquilt: update to 0.60
Luka Perkov [Tue, 24 Sep 2013 20:01:03 +0000 (20:01 +0000)]
quilt: update to 0.60

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38170

6 years agobison: update to 3.0
Luka Perkov [Tue, 24 Sep 2013 20:01:02 +0000 (20:01 +0000)]
bison: update to 3.0

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38169

6 years agom4: update to 1.4.17
Luka Perkov [Tue, 24 Sep 2013 20:01:00 +0000 (20:01 +0000)]
m4: update to 1.4.17

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38168

6 years agosdcc: drop tool, it is not used since r31227
Luka Perkov [Tue, 24 Sep 2013 16:21:30 +0000 (16:21 +0000)]
sdcc: drop tool, it is not used since r31227

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38167

6 years agouml: work around mangled parameter handling for ubd
Steven Barth [Tue, 24 Sep 2013 13:36:42 +0000 (13:36 +0000)]
uml: work around mangled parameter handling for ubd

SVN-Revision: 38166

6 years agouml: fix some kernel compilation issues with GCC
Steven Barth [Tue, 24 Sep 2013 13:36:38 +0000 (13:36 +0000)]
uml: fix some kernel compilation issues with GCC

SVN-Revision: 38165

6 years agouml: work-around console issue with procd
Steven Barth [Tue, 24 Sep 2013 13:36:33 +0000 (13:36 +0000)]
uml: work-around console issue with procd

SVN-Revision: 38164

6 years agoppc44x: remove 3.8 support
Gabor Juhos [Tue, 24 Sep 2013 13:17:48 +0000 (13:17 +0000)]
ppc44x: remove 3.8 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38163

6 years agoppc44x: switch to 3.10
Gabor Juhos [Tue, 24 Sep 2013 13:17:47 +0000 (13:17 +0000)]
ppc44x: switch to 3.10

Compile tested only. The target is marked as
broken since 16 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38162

6 years agoppc44x: add support for 3.10
Gabor Juhos [Tue, 24 Sep 2013 13:17:46 +0000 (13:17 +0000)]
ppc44x: add support for 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38161

6 years agorb532: remove 3.8 support
Gabor Juhos [Tue, 24 Sep 2013 13:17:45 +0000 (13:17 +0000)]
rb532: remove 3.8 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38160

6 years agorb532: switch 3.10
Gabor Juhos [Tue, 24 Sep 2013 13:17:43 +0000 (13:17 +0000)]
rb532: switch 3.10

Compile tested only. The target is marked as
broken since 9 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38159

6 years agorb532: add support for 3.10
Gabor Juhos [Tue, 24 Sep 2013 13:17:42 +0000 (13:17 +0000)]
rb532: add support for 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38158

6 years agorb532: image: fix broken ifneq statement
Gabor Juhos [Tue, 24 Sep 2013 13:17:39 +0000 (13:17 +0000)]
rb532: image: fix broken ifneq statement

Fixes the following build error:

  /devel/openwrt/staging_dir/host/bin/patch-cmdline \
  /devel/openwrt/build_dir/target-mipsel_uClibc-0.9.33.2/linux-rb532/vmlinux-initramfs \
  'root=/dev/mtdblock1 rootfstype=yaffs2 '
  Could not open kernel imagemake[5]: *** [install] Error 255

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38157

6 years agorb532: remove trailing whitespaces from image/Makefile
Gabor Juhos [Tue, 24 Sep 2013 13:17:38 +0000 (13:17 +0000)]
rb532: remove trailing whitespaces from image/Makefile

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38156

6 years agoar71xx: image: simplify mynet_n600_mtdlayout
Gabor Juhos [Tue, 24 Sep 2013 12:19:57 +0000 (12:19 +0000)]
ar71xx: image: simplify mynet_n600_mtdlayout

Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:

  0x000000070000-0x000000ff0000 : "firmware"
  2 seama-fw partitions found on MTD device firmware
  0x000000070000-0x0000001b0000 : "kernel"
  0x0000001b0000-0x000000ff0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  1 squashfs-split partitions found on MTD device rootfs
  0x000000360000-0x000000ff0000 : "rootfs_data"
  0x000000ff0000-0x000001000000 : "radiocfg"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38155

6 years agoar71xx: enable the Seama firmware parser
Gabor Juhos [Tue, 24 Sep 2013 12:19:54 +0000 (12:19 +0000)]
ar71xx: enable the Seama firmware parser

It will be used for the WD My Net N600 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38154

6 years agoar71xx: update the Image/Build/WZRHP macro
Gabor Juhos [Tue, 24 Sep 2013 09:36:26 +0000 (09:36 +0000)]
ar71xx: update the Image/Build/WZRHP macro

 - append the root squashfs directly after the kernel,
 - use the 64kraw/128kraw template instead of the 64k/128k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on WZR-HP-G300NH and WZR-600DHP boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38153

6 years agoar71xx: image: use a common macro for Buffalo WZRHP devices
Gabor Juhos [Tue, 24 Sep 2013 09:36:25 +0000 (09:36 +0000)]
ar71xx: image: use a common macro for Buffalo WZRHP devices

The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38152

6 years agoar71xx: image: update Image/Build/CameoAP94 macro
Gabor Juhos [Tue, 24 Sep 2013 08:14:44 +0000 (08:14 +0000)]
ar71xx: image: update Image/Build/CameoAP94 macro

 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-673GRU board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38151

6 years agoar71xx: image: use a common macro for Cameo AP94 based devices
Gabor Juhos [Tue, 24 Sep 2013 08:14:43 +0000 (08:14 +0000)]
ar71xx: image: use a common macro for Cameo AP94 based devices

The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38150

6 years agoar71xx: image: use the board name for temporary mtdpart files
Gabor Juhos [Tue, 24 Sep 2013 06:13:14 +0000 (06:13 +0000)]
ar71xx: image: use the board name for temporary mtdpart files

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38149

6 years agoar71xx: update the Image/Build/UBNT2 macro
Gabor Juhos [Tue, 24 Sep 2013 05:58:34 +0000 (05:58 +0000)]
ar71xx: update the Image/Build/UBNT2 macro

 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a WispStation M5 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38148

6 years agoar71xx: build intramfs images for the Ubiquiti XM boards
Gabor Juhos [Tue, 24 Sep 2013 05:58:32 +0000 (05:58 +0000)]
ar71xx: build intramfs images for the Ubiquiti XM boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38147

6 years agoar71xx: image: use a common macro for UBNTXM/UBNTDEV
Gabor Juhos [Tue, 24 Sep 2013 05:58:31 +0000 (05:58 +0000)]
ar71xx: image: use a common macro for UBNTXM/UBNTDEV

The firmware generation part is the same for both
macros. Move that into a separate macro and use the
new macro for Image/Build/UB{NTXM,DEV}.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38146

6 years agoiwinfo: add Ubiquiti WispStation M5 to hardware.txt
Gabor Juhos [Tue, 24 Sep 2013 05:58:29 +0000 (05:58 +0000)]
iwinfo: add Ubiquiti WispStation M5 to hardware.txt

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38145

6 years agofix various init scripts
Luka Perkov [Mon, 23 Sep 2013 21:58:36 +0000 (21:58 +0000)]
fix various init scripts

Changes include:

* removing unused variables
* replacing spaces with tabs where appropriate
* more consistency with variable declarations

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38142

6 years agoar71xx: image: update Image/Build/WHRHPG300N macro
Gabor Juhos [Mon, 23 Sep 2013 19:49:27 +0000 (19:49 +0000)]
ar71xx: image: update Image/Build/WHRHPG300N macro

 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the WHR-G301N board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38141

6 years agoar71xx: image use the 64kraw template for the TEW-732BR board
Gabor Juhos [Mon, 23 Sep 2013 12:54:05 +0000 (12:54 +0000)]
ar71xx: image use the 64kraw template for the TEW-732BR board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38140

6 years agoar71xx: image: update Build/Image/Planex macro
Gabor Juhos [Mon, 23 Sep 2013 12:14:20 +0000 (12:14 +0000)]
ar71xx: image: update Build/Image/Planex macro

 - remove the 'kernel' and 'rootfs' partitions from the mtd layout,
 - move the .okli image into the uImage,
 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the MZK-W300NH board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38139

6 years agoar71xx: image: allow to build initramfs for Planex devices
Gabor Juhos [Mon, 23 Sep 2013 12:14:19 +0000 (12:14 +0000)]
ar71xx: image: allow to build initramfs for Planex devices

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38138

6 years agoar71xx: image: build Planex kernels in a separate step
Gabor Juhos [Mon, 23 Sep 2013 12:14:18 +0000 (12:14 +0000)]
ar71xx: image: build Planex kernels in a separate step

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38137

6 years agoar71xx: add profile and build image for the TEW-732BR board
Gabor Juhos [Mon, 23 Sep 2013 09:49:04 +0000 (09:49 +0000)]
ar71xx: add profile and build image for the TEW-732BR board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38133

6 years agoar71xx: add user-space support for the TEW-732BR board
Gabor Juhos [Mon, 23 Sep 2013 09:49:02 +0000 (09:49 +0000)]
ar71xx: add user-space support for the TEW-732BR board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38132

6 years agoar71xx: add kernel support for the TEW-732BR board
Gabor Juhos [Mon, 23 Sep 2013 09:49:01 +0000 (09:49 +0000)]
ar71xx: add kernel support for the TEW-732BR board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38131

6 years agoar71xx: image: update the Image/Build/CameoHornet macro
Gabor Juhos [Mon, 23 Sep 2013 09:22:50 +0000 (09:22 +0000)]
ar71xx: image: update the Image/Build/CameoHornet macro

 - append the root squashfs directly to the kernel,
 - use the 64kraw-nojffs template instead of sqashfs-only
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-712BR devices only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38130

6 years agoar71xx: update the Image/Build/Cameo macro
Gabor Juhos [Mon, 23 Sep 2013 09:01:06 +0000 (09:01 +0000)]
ar71xx: update the Image/Build/Cameo macro

 - append the root squashfs directly to the kernel,
 - use the 64kraw/64kraw-nojffs template instead of 64k/squashfs-only,
 - ensure, that the signature is placed at the correct offset in
   the *-factory images,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on DIR-600-A1 and TEW-632BR devices only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38129

6 years agoar71xx: image: add new macros for AP99 based Cameo devices
Gabor Juhos [Mon, 23 Sep 2013 08:24:10 +0000 (08:24 +0000)]
ar71xx: image: add new macros for AP99 based Cameo devices

The MTD layout of the AP99 based devices is different.
Add new macros to reflect that and use the new macros
for the DIR-615-E4 board.

This prevents overwriting of the 'mac' partition which
contain vital informations. The disadvantage of the change
is that the usable space is reduced by 192KiB. Blame the
vendors for the unfriendly partition layout.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38128

6 years agoar71xx: image: rename the Cameo macros
Gabor Juhos [Mon, 23 Sep 2013 08:24:05 +0000 (08:24 +0000)]
ar71xx: image: rename the Cameo macros

Use the reference board name in the macro
instead of the SoC number.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38127

6 years agoar71xx: image: add optional JFFS2 padding support to the CatFiles macro
Gabor Juhos [Sun, 22 Sep 2013 20:14:23 +0000 (20:14 +0000)]
ar71xx: image: add optional JFFS2 padding support to the CatFiles macro

Also remove the similar code from the Netgear
profile and use the new feature instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38126

6 years agoar71xx: image: remove too big files in the CatFiles macro
Gabor Juhos [Sun, 22 Sep 2013 20:14:22 +0000 (20:14 +0000)]
ar71xx: image: remove too big files in the CatFiles macro

Also improve the warning message.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38125

6 years agoxtables-addons: fix missing conversion from r38021 (resolves a broken dependency)
Felix Fietkau [Sun, 22 Sep 2013 19:49:23 +0000 (19:49 +0000)]
xtables-addons: fix missing conversion from r38021 (resolves a broken dependency)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38124

6 years agoar71xx: simplify wndr3700 image generation
Gabor Juhos [Sun, 22 Sep 2013 11:45:09 +0000 (11:45 +0000)]
ar71xx: simplify wndr3700 image generation

 - remove the kernel and rootfs partitions from the mtd layout,
   the kernel creates those automatically,
 - remove estimation step, it is not needed anymore
 - put the root squashfs directly after the kernel
 - use the 64kraw template

With the default configuration, this allows to use more space for
rootfs_data with 64KiB. Tested on WNDR3700 v1 only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38120

6 years agoar71xx: use the separate rootfs and uImage parsers
Gabor Juhos [Sun, 22 Sep 2013 11:45:08 +0000 (11:45 +0000)]
ar71xx: use the separate rootfs and uImage parsers

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38119

6 years agoar71xx: sync kernel config
Gabor Juhos [Sun, 22 Sep 2013 11:45:06 +0000 (11:45 +0000)]
ar71xx: sync kernel config

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38118

6 years agoar71xx: image: add mtdpartsize macro
Gabor Juhos [Sun, 22 Sep 2013 09:11:25 +0000 (09:11 +0000)]
ar71xx: image: add mtdpartsize macro

The new macro will be used to determine the firmware
partition size from an MTD layout.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38117

6 years agoar71xx: image: improve the rootfs_align macro
Gabor Juhos [Sun, 22 Sep 2013 09:11:24 +0000 (09:11 +0000)]
ar71xx: image: improve the rootfs_align macro

Improve the macro to return correct value for
all squashfs variant.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38116

6 years agoar71xx: image: improve the CatFiles macro
Gabor Juhos [Sun, 22 Sep 2013 09:11:22 +0000 (09:11 +0000)]
ar71xx: image: improve the CatFiles macro

Make it possible to append the rootfs image directly
to the kernel.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38115

6 years agokernel/3.10: add partition parser for Seama firmwares
Gabor Juhos [Sat, 21 Sep 2013 17:56:18 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for Seama firmwares

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38114

6 years agokernel/3.10: add partition parser for uImage firmwares
Gabor Juhos [Sat, 21 Sep 2013 17:56:09 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for uImage firmwares

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38113

6 years agokernel/3.10: add default partition name defines to mtdsplit.h
Gabor Juhos [Sat, 21 Sep 2013 17:56:01 +0000 (17:56 +0000)]
kernel/3.10: add default partition name defines to mtdsplit.h

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38112

6 years agokernel/3.10: add more helpers to the mtdsplit code
Gabor Juhos [Sat, 21 Sep 2013 17:55:54 +0000 (17:55 +0000)]
kernel/3.10: add more helpers to the mtdsplit code

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38111

6 years agokernel/3.10: add separate rootfs partition parser
Gabor Juhos [Sat, 21 Sep 2013 17:55:49 +0000 (17:55 +0000)]
kernel/3.10: add separate rootfs partition parser

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38110

6 years agokernel/3.10: move squashfs check from rootfs split code into a separate file
Gabor Juhos [Sat, 21 Sep 2013 17:55:44 +0000 (17:55 +0000)]
kernel/3.10: move squashfs check from rootfs split code into a separate file

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38109

6 years agokernel/3.10: allow to use partition parsers for rootfs and firmware split
Gabor Juhos [Sat, 21 Sep 2013 17:55:30 +0000 (17:55 +0000)]
kernel/3.10: allow to use partition parsers for rootfs and firmware split

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38108

6 years agokernel/3.10: allow to use different MTD parser types
Gabor Juhos [Sat, 21 Sep 2013 17:55:18 +0000 (17:55 +0000)]
kernel/3.10: allow to use different MTD parser types

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38107

6 years agoar71xx: enable wlan2g led in the default configuration of dir-825-c1
Gabor Juhos [Sat, 21 Sep 2013 16:08:45 +0000 (16:08 +0000)]
ar71xx: enable wlan2g led in the default configuration of dir-825-c1

Enable the wlan2g led in the default configuration of dir-825-c1.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4079/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38106

6 years agoar71xx: vanity changes for dir-825-c1
Gabor Juhos [Sat, 21 Sep 2013 16:08:44 +0000 (16:08 +0000)]
ar71xx: vanity changes for dir-825-c1

This patch

- changes the color names from orange to amber
- changes the name of GPIO 13 from WIFI_BGN (wifi_bgn) to WLAN_2G
  (wlan2g) to be more consistent with the other routers' files
- changes the descriptions of the hardware keys to be a tad more
  explicit

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4081/
[juhosg: update the LED migration script as well]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38105

6 years agoar71xx: diag.sh: consolidate netgear device entries
Gabor Juhos [Sat, 21 Sep 2013 15:55:57 +0000 (15:55 +0000)]
ar71xx: diag.sh: consolidate netgear device entries

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38104

6 years agoar71xx: use the green power led for diag on the WNR2200 board
Gabor Juhos [Sat, 21 Sep 2013 15:55:56 +0000 (15:55 +0000)]
ar71xx: use the green power led for diag on the WNR2200 board

Make it consistent with the other Netgear boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38103

6 years agoar71xx: use netgear prefix for WNDAP360 LED names
Gabor Juhos [Sat, 21 Sep 2013 15:55:55 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNDAP360 LED names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38102

6 years agoar71xx: use netgear prefix for WNR612 v2 LED names
Gabor Juhos [Sat, 21 Sep 2013 15:55:54 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR612 v2 LED names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38101

6 years agoar71xx: use netgear prefix for WNR2200 LED names
Gabor Juhos [Sat, 21 Sep 2013 15:55:52 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2200 LED names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38100

6 years agoar71xx: use netgear prefix for WNR2000 LED names
Gabor Juhos [Sat, 21 Sep 2013 15:55:51 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2000 LED names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38099

6 years agoar71xx: use netgear prefix for WNDR3700 LED names
Gabor Juhos [Sat, 21 Sep 2013 15:55:50 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNDR3700 LED names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38098

6 years agoar71xx: add an uci-defaults script for LED configuration migration
Gabor Juhos [Sat, 21 Sep 2013 15:55:49 +0000 (15:55 +0000)]
ar71xx: add an uci-defaults script for LED configuration migration

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38097

6 years agoar71xx: let HW switch control WAN LED on dir-825-c1
Gabor Juhos [Sat, 21 Sep 2013 14:56:24 +0000 (14:56 +0000)]
ar71xx: let HW switch control WAN LED on dir-825-c1

Enable GPIO 20. This hands off control of the blue planet led to the
integrated switch. Consequently, remove the led configuration for the
blue planet led.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4080/
[juhosg: whitespace fixup]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38096