openwrt/staging/wigyori.git
7 years agopackages: clean up the package folder
John Crispin [Fri, 21 Jun 2013 16:54:37 +0000 (16:54 +0000)]
packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007

7 years agolantiq: Tune the XWAY subtarget cflags
John Crispin [Fri, 21 Jun 2013 16:54:15 +0000 (16:54 +0000)]
lantiq: Tune the XWAY subtarget cflags

This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 37006

7 years agolantiq: set mips16 support.
John Crispin [Fri, 21 Jun 2013 16:54:07 +0000 (16:54 +0000)]
lantiq: set mips16 support.

Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37005

7 years agolantiq: Fix ARV7518 DTS definitions
John Crispin [Fri, 21 Jun 2013 16:54:03 +0000 (16:54 +0000)]
lantiq: Fix ARV7518 DTS definitions

Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37004

7 years agobase-files: module loading is now handled by ubox/kmodloader
John Crispin [Fri, 21 Jun 2013 16:53:59 +0000 (16:53 +0000)]
base-files: module loading is now handled by ubox/kmodloader

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37003

7 years agobase-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
John Crispin [Fri, 21 Jun 2013 16:53:55 +0000 (16:53 +0000)]
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37002

7 years agobase-files: drop 2 pointless hotplug trigger stubs
John Crispin [Fri, 21 Jun 2013 16:53:51 +0000 (16:53 +0000)]
base-files: drop 2 pointless hotplug trigger stubs

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37001

7 years agobase-files: input/button drivers get loaded before preinit by procd
John Crispin [Fri, 21 Jun 2013 16:53:47 +0000 (16:53 +0000)]
base-files: input/button drivers get loaded before preinit by procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000

7 years agobase-files: diag does not need to insmod any drivers, procd already did it for us
John Crispin [Fri, 21 Jun 2013 16:53:43 +0000 (16:53 +0000)]
base-files: diag does not need to insmod any drivers, procd already did it for us

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999

7 years agobase-files: procd is now the init process
John Crispin [Fri, 21 Jun 2013 16:53:38 +0000 (16:53 +0000)]
base-files: procd is now the init process

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36998

7 years agobusybox: procd is now the init process
John Crispin [Fri, 21 Jun 2013 16:53:30 +0000 (16:53 +0000)]
busybox: procd is now the init process

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36997

7 years agobase-files: procd init is now the default, remove files.old
John Crispin [Fri, 21 Jun 2013 16:53:26 +0000 (16:53 +0000)]
base-files: procd init is now the default, remove files.old

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36996

7 years agoprocd: update to latest git revision
John Crispin [Fri, 21 Jun 2013 16:53:22 +0000 (16:53 +0000)]
procd: update to latest git revision

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36995

7 years agoprocd: fix hotplug rule to not return on default makedev trigger
John Crispin [Fri, 21 Jun 2013 16:53:19 +0000 (16:53 +0000)]
procd: fix hotplug rule to not return on default makedev trigger

this allows the subsystem trigger to also be called

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36994

7 years agobrcm47xx: dont manually insmod switch drivers
John Crispin [Fri, 21 Jun 2013 16:53:15 +0000 (16:53 +0000)]
brcm47xx: dont manually insmod switch drivers

Signed-off-by: John Crispin <bloic@openwrt.org>
SVN-Revision: 36993

7 years agoar71xx: drop procd_init console hack
John Crispin [Fri, 21 Jun 2013 16:53:11 +0000 (16:53 +0000)]
ar71xx: drop procd_init console hack

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36992

7 years agohostapd: remove old button hotplug script
John Crispin [Fri, 21 Jun 2013 16:53:07 +0000 (16:53 +0000)]
hostapd: remove old button hotplug script

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36991

7 years agoubox: update to latest git version
John Crispin [Fri, 21 Jun 2013 16:53:03 +0000 (16:53 +0000)]
ubox: update to latest git version

add block mount / extroot support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36989

7 years agoblock-mount: drop package, ubox now does the job for us
John Crispin [Fri, 21 Jun 2013 16:53:00 +0000 (16:53 +0000)]
block-mount: drop package, ubox now does the job for us

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36988

7 years agohotplug2: procd does the hotplugging now
John Crispin [Fri, 21 Jun 2013 16:52:56 +0000 (16:52 +0000)]
hotplug2: procd does the hotplugging now

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36987

7 years agoutil-linux: move package to package/system/utils
John Crispin [Fri, 21 Jun 2013 16:52:52 +0000 (16:52 +0000)]
util-linux: move package to package/system/utils

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36986

7 years agoutil-linux: fix endianess bug and stage libraries properly
John Crispin [Fri, 21 Jun 2013 16:52:48 +0000 (16:52 +0000)]
util-linux: fix endianess bug and stage libraries properly

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36985

7 years agolibubox: update to latest version, fixes utf-8 corruption issues in blobmsg_json
Felix Fietkau [Fri, 21 Jun 2013 15:19:31 +0000 (15:19 +0000)]
libubox: update to latest version, fixes utf-8 corruption issues in blobmsg_json

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36984

7 years agoath9k_htc: fix idle mode handling
Felix Fietkau [Fri, 21 Jun 2013 10:57:35 +0000 (10:57 +0000)]
ath9k_htc: fix idle mode handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36983

7 years agoincrease kernel partition size to fix boot issues
Imre Kaloz [Fri, 21 Jun 2013 10:57:05 +0000 (10:57 +0000)]
increase kernel partition size to fix boot issues

SVN-Revision: 36982

7 years ago6relayd: Fix DHCPv6-PD assignment logic
Steven Barth [Fri, 21 Jun 2013 06:15:09 +0000 (06:15 +0000)]
6relayd: Fix DHCPv6-PD assignment logic

SVN-Revision: 36980

7 years agobrcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
Florian Fainelli [Thu, 20 Jun 2013 18:47:36 +0000 (18:47 +0000)]
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8

We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36979

7 years agomac80211: add rt2x00-mmio package to store the common parts for SoC and PCI access
Hauke Mehrtens [Thu, 20 Jun 2013 15:03:28 +0000 (15:03 +0000)]
mac80211: add rt2x00-mmio package to store the common parts for SoC and PCI access

This should fix a build error on ramips.

SVN-Revision: 36978

7 years agoath9k: fix cabq depth accounting
Felix Fietkau [Thu, 20 Jun 2013 13:10:31 +0000 (13:10 +0000)]
ath9k: fix cabq depth accounting

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36977

7 years agoacx-mac80211: make it compile with the new backports mac80211
Hauke Mehrtens [Wed, 19 Jun 2013 21:37:56 +0000 (21:37 +0000)]
acx-mac80211: make it compile with the new backports mac80211

SVN-Revision: 36976

7 years agomac80211: libertas-sd depends on mmc
Hauke Mehrtens [Wed, 19 Jun 2013 21:36:52 +0000 (21:36 +0000)]
mac80211: libertas-sd depends on mmc

SVN-Revision: 36975

7 years agomac80211: copy the backport-include files to staging_dir
Hauke Mehrtens [Wed, 19 Jun 2013 21:36:22 +0000 (21:36 +0000)]
mac80211: copy the backport-include files to staging_dir

SVN-Revision: 36974

7 years agomac80211: do not use CPTCFG_SSB and CPTCFG_BCMA
Hauke Mehrtens [Wed, 19 Jun 2013 21:33:31 +0000 (21:33 +0000)]
mac80211: do not use CPTCFG_SSB and CPTCFG_BCMA

ssb and bcma are not build by compat-wireless / backports and the
config symbols are also not taken from there. Use the in kernel config
symbols. This fixes a build error in brcmsmac/led.c

SVN-Revision: 36973

7 years agomac80211: do not build RT2X00_LIB_XXX when XXX is not available in the kernel.
Hauke Mehrtens [Wed, 19 Jun 2013 21:29:34 +0000 (21:29 +0000)]
mac80211: do not build RT2X00_LIB_XXX when XXX is not available in the kernel.

It was possible to select RT2X00_LIB_PCI without PCI being selected.

This closes #13720
mrkiko thanks for testing.

SVN-Revision: 36972

7 years ago6relayd: correctly set downstream routes for DHCPv6-PD
Steven Barth [Wed, 19 Jun 2013 13:08:33 +0000 (13:08 +0000)]
6relayd: correctly set downstream routes for DHCPv6-PD

SVN-Revision: 36969

7 years agolinux-3.8: backport a leds-gpio.c crash fix (fixes #13721)
Felix Fietkau [Tue, 18 Jun 2013 22:23:38 +0000 (22:23 +0000)]
linux-3.8: backport a leds-gpio.c crash fix (fixes #13721)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36968

7 years agotools/mkimage: add back a fixed version of 040-include_order.patch to fix build error...
Felix Fietkau [Tue, 18 Jun 2013 21:53:46 +0000 (21:53 +0000)]
tools/mkimage: add back a fixed version of 040-include_order.patch to fix build errors on some systems (#12232)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36967

7 years agonetifd: update to latest version, fixes a NULL pointer deref bug
Felix Fietkau [Tue, 18 Jun 2013 16:24:48 +0000 (16:24 +0000)]
netifd: update to latest version, fixes a NULL pointer deref bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36965

7 years agofirewall: update to git head
Jo-Philipp Wich [Tue, 18 Jun 2013 14:30:51 +0000 (14:30 +0000)]
firewall: update to git head

- fixes misprocessing of unknown symbolic protocol names

SVN-Revision: 36963

7 years agofirewall: update to git head
Jo-Philipp Wich [Tue, 18 Jun 2013 14:14:35 +0000 (14:14 +0000)]
firewall: update to git head

- fixes calculation of IPv4 netmasks derived from 0.0.0.0/0 CIDRs

SVN-Revision: 36960

7 years agoodhcp6c: Add option to override interface identifier in RA-client
Steven Barth [Tue, 18 Jun 2013 12:51:14 +0000 (12:51 +0000)]
odhcp6c: Add option to override interface identifier in RA-client

SVN-Revision: 36959

7 years agobrcm63xx: refresh 3.9 patches
Florian Fainelli [Tue, 18 Jun 2013 10:54:28 +0000 (10:54 +0000)]
brcm63xx: refresh 3.9 patches

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958

7 years agobrcm63xx: provide a default sane MAC address for Cable Modem devices
Florian Fainelli [Tue, 18 Jun 2013 10:54:24 +0000 (10:54 +0000)]
brcm63xx: provide a default sane MAC address for Cable Modem devices

Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36957

7 years agolibubox: update to latest version, fixes uloop recursion issues
Felix Fietkau [Tue, 18 Jun 2013 10:52:40 +0000 (10:52 +0000)]
libubox: update to latest version, fixes uloop recursion issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36956

7 years agoustream-ssl: update to latest version, fixes uhttpd infinite loop issues
Felix Fietkau [Tue, 18 Jun 2013 10:52:33 +0000 (10:52 +0000)]
ustream-ssl: update to latest version, fixes uhttpd infinite loop issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36955

7 years agobrcm63xx: create initramfs HCS images
Florian Fainelli [Mon, 17 Jun 2013 22:57:04 +0000 (22:57 +0000)]
brcm63xx: create initramfs HCS images

Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36954

7 years agonetifd: IPv6: Fix sorting order in last commit.
Steven Barth [Mon, 17 Jun 2013 21:29:14 +0000 (21:29 +0000)]
netifd: IPv6: Fix sorting order in last commit.

SVN-Revision: 36952

7 years agonetifd: Satisfy IPv6 assignments ordered by prefix length
Steven Barth [Mon, 17 Jun 2013 21:16:22 +0000 (21:16 +0000)]
netifd: Satisfy IPv6 assignments ordered by prefix length

SVN-Revision: 36950

7 years agobrcm63xx: simplify HCS image creation
Florian Fainelli [Mon, 17 Jun 2013 19:32:56 +0000 (19:32 +0000)]
brcm63xx: simplify HCS image creation

$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36949

7 years agobrcm63xx: remove support for 3.8 kernel
Florian Fainelli [Mon, 17 Jun 2013 19:32:47 +0000 (19:32 +0000)]
brcm63xx: remove support for 3.8 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36948

7 years agobrcm63xx: switch to 3.9 kernel
Florian Fainelli [Mon, 17 Jun 2013 19:32:42 +0000 (19:32 +0000)]
brcm63xx: switch to 3.9 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36947

7 years agobrcm63xx: fix missing antislash in BCM6345 ethernet patch
Florian Fainelli [Mon, 17 Jun 2013 19:32:35 +0000 (19:32 +0000)]
brcm63xx: fix missing antislash in BCM6345 ethernet patch

This would cause build failure when disabling support for particular
CPUs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36946

7 years agohostapd: correctly handle macfile uci option
Jo-Philipp Wich [Mon, 17 Jun 2013 11:59:29 +0000 (11:59 +0000)]
hostapd: correctly handle macfile uci option

Make hostapd.sh correctly handle the macfile uci option.

Such option specifies the macfile name to pass into the
hostapd configuration file. Moreover, if a maclist option
has been specified, copy the macfile before appending new
entries.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
SVN-Revision: 36944

7 years agodnsmasq: use host-record instead of address
Jo-Philipp Wich [Mon, 17 Jun 2013 11:55:30 +0000 (11:55 +0000)]
dnsmasq: use host-record instead of address

Using "--address" for individual host A records is broken, use "--host-record" instead.
The following patch changes dnsmasq.init to build individual host records using "--host-record" instead of "--address".

Signed-off-by: Adam Gensler <openwrt at gnslr.us>
[jow: shorter description, simplified shell script code]

SVN-Revision: 36943

7 years agobase-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take...
Jo-Philipp Wich [Mon, 17 Jun 2013 11:33:36 +0000 (11:33 +0000)]
base-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take ipv6-prefix-assignment into account, add further helper functions to fetch all ips of a given interface

SVN-Revision: 36942

7 years agoath9k: revert parts of the ANI changes in the latest mac80211 update to fix regressions
Felix Fietkau [Sun, 16 Jun 2013 12:56:16 +0000 (12:56 +0000)]
ath9k: revert parts of the ANI changes in the latest mac80211 update to fix regressions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36941

7 years agomac80211: fix disabling rfkill support
Felix Fietkau [Sun, 16 Jun 2013 09:25:41 +0000 (09:25 +0000)]
mac80211: fix disabling rfkill support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36940

7 years agomac80211: update to wireless-testing 2013-06-13 + latest backport infrastructure
Felix Fietkau [Sat, 15 Jun 2013 20:14:06 +0000 (20:14 +0000)]
mac80211: update to wireless-testing 2013-06-13 + latest backport infrastructure

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36939

7 years agokirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702)
Felix Fietkau [Sat, 15 Jun 2013 11:50:50 +0000 (11:50 +0000)]
kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36937

7 years agofirewall: update to git head
Jo-Philipp Wich [Thu, 13 Jun 2013 18:54:49 +0000 (18:54 +0000)]
firewall: update to git head

- properly process intermediate "!" options in argument list (fixes negated ipsets)

SVN-Revision: 36935

7 years agofirewall: update to git head
Jo-Philipp Wich [Thu, 13 Jun 2013 12:49:00 +0000 (12:49 +0000)]
firewall: update to git head

- fixes handling of reject target for rule sections with specific destination zone

SVN-Revision: 36933

7 years agouhttpd: expose missing options to uci
Jo-Philipp Wich [Thu, 13 Jun 2013 11:55:12 +0000 (11:55 +0000)]
uhttpd: expose missing options to uci

SVN-Revision: 36932

7 years agoodhcp6c: add sanity checks for NDP and MTU parameters from RAs
Steven Barth [Thu, 13 Jun 2013 06:38:48 +0000 (06:38 +0000)]
odhcp6c: add sanity checks for NDP and MTU parameters from RAs

SVN-Revision: 36930

7 years agobrcm47xx: run make kernel_oldconfig for 3.9 kernel config
Hauke Mehrtens [Wed, 12 Jun 2013 14:51:50 +0000 (14:51 +0000)]
brcm47xx: run make kernel_oldconfig for 3.9 kernel config

SVN-Revision: 36928

7 years agobrcm47xx: remove support for kernel 3.6
Hauke Mehrtens [Wed, 12 Jun 2013 14:48:45 +0000 (14:48 +0000)]
brcm47xx: remove support for kernel 3.6

SVN-Revision: 36927

7 years agobrcm47xx: add initial support for kernel 3.9
Hauke Mehrtens [Wed, 12 Jun 2013 14:47:53 +0000 (14:47 +0000)]
brcm47xx: add initial support for kernel 3.9

SVN-Revision: 36926

7 years agokernel: add dependencies for kernel 3.10
Hauke Mehrtens [Wed, 12 Jun 2013 13:59:34 +0000 (13:59 +0000)]
kernel: add dependencies for kernel 3.10

SVN-Revision: 36925

7 years ago6relayd: make route preference and prefix on-link flag configurable
Steven Barth [Tue, 11 Jun 2013 20:52:27 +0000 (20:52 +0000)]
6relayd: make route preference and prefix on-link flag configurable

SVN-Revision: 36922

7 years agobase-files: remove unnecessary early sysctl-hack
Steven Barth [Tue, 11 Jun 2013 14:10:45 +0000 (14:10 +0000)]
base-files: remove unnecessary early sysctl-hack

SVN-Revision: 36920

7 years agobase-files: set default IPv6 forwarding value to 1
Steven Barth [Tue, 11 Jun 2013 13:30:18 +0000 (13:30 +0000)]
base-files: set default IPv6 forwarding value to 1

SVN-Revision: 36918

7 years agouci: update to fix excessive reorder delta entry duplication (#13678)
Felix Fietkau [Tue, 11 Jun 2013 12:51:08 +0000 (12:51 +0000)]
uci: update to fix excessive reorder delta entry duplication (#13678)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36915

7 years agolibubox: update to latest version, fixes an uloop use-after-free bug
Felix Fietkau [Tue, 11 Jun 2013 11:46:54 +0000 (11:46 +0000)]
libubox: update to latest version, fixes an uloop use-after-free bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36914

7 years agolinux: add ipv6 failed-policy routing action (by Jonas Gorski)
Steven Barth [Tue, 11 Jun 2013 09:27:53 +0000 (09:27 +0000)]
linux: add ipv6 failed-policy routing action (by Jonas Gorski)

SVN-Revision: 36911

7 years agoiproute2: add drop-failed rule action (patch by Jonas Gorski)
Steven Barth [Tue, 11 Jun 2013 09:27:46 +0000 (09:27 +0000)]
iproute2: add drop-failed rule action (patch by Jonas Gorski)

SVN-Revision: 36910

7 years agonetifd: update to latest version, uses the new uci/blob code from libuci
Felix Fietkau [Mon, 10 Jun 2013 12:42:30 +0000 (12:42 +0000)]
netifd: update to latest version, uses the new uci/blob code from libuci

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36909

7 years agouci: update to latest version, adds uci<->blobmsg conversion code from netifd
Felix Fietkau [Mon, 10 Jun 2013 12:42:25 +0000 (12:42 +0000)]
uci: update to latest version, adds uci<->blobmsg conversion code from netifd

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36908

7 years agolibubox: update to latest version, adds some helper function
Felix Fietkau [Mon, 10 Jun 2013 12:42:20 +0000 (12:42 +0000)]
libubox: update to latest version, adds some helper function

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36907

7 years agoppp: correctly handle address when reloading
Steven Barth [Mon, 10 Jun 2013 10:42:34 +0000 (10:42 +0000)]
ppp: correctly handle address when reloading

SVN-Revision: 36904

7 years agonetifd: improve reloading behaviour
Steven Barth [Mon, 10 Jun 2013 10:42:15 +0000 (10:42 +0000)]
netifd: improve reloading behaviour

SVN-Revision: 36903

7 years agolantiq: atm: Use a tasklet to handle incoming packets. Fix #12917.
John Crispin [Mon, 10 Jun 2013 08:25:17 +0000 (08:25 +0000)]
lantiq: atm: Use a tasklet to handle incoming packets. Fix #12917.

Incoming packets are now processes in a tasklet instead of in the
irq handler; this should improve latency.

This patch is based on a previous version of ltq-atm driver, which
did implement a tasklet.

It has been tested on a arv4518pw with a
Lantiq Danube for about a month and it seems to work well.

Signed-off-by: Luca Dariz <luca.dariz@gmail.com>
Tested-by: Luca Dariz <luca.dariz@gmail.com>
SVN-Revision: 36902

7 years agolantiq: Fixes to athxk EEPROM loading
John Crispin [Mon, 10 Jun 2013 08:25:12 +0000 (08:25 +0000)]
lantiq: Fixes to athxk EEPROM loading

Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36901

7 years agolantiq: make kernel_oldconfig
John Crispin [Mon, 10 Jun 2013 08:25:07 +0000 (08:25 +0000)]
lantiq: make kernel_oldconfig

Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36900

7 years agolantiq: diag.sh with both red and green power LEDs
John Crispin [Mon, 10 Jun 2013 08:25:02 +0000 (08:25 +0000)]
lantiq: diag.sh with both red and green power LEDs

This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36899

7 years agoramips: add HAME MPR-A2 support
John Crispin [Mon, 10 Jun 2013 08:24:56 +0000 (08:24 +0000)]
ramips: add HAME MPR-A2 support

This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898

7 years agoramips: add support for belkin F7C027 wemo/homeautomatisation plug
John Crispin [Mon, 10 Jun 2013 08:24:50 +0000 (08:24 +0000)]
ramips: add support for belkin F7C027 wemo/homeautomatisation plug

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897

7 years agoprocd: make the preinit rules wildcard all buttons for failsafe
John Crispin [Mon, 10 Jun 2013 08:24:44 +0000 (08:24 +0000)]
procd: make the preinit rules wildcard all buttons for failsafe

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36896

7 years agoprocd: update to latest git revision
John Crispin [Mon, 10 Jun 2013 08:24:39 +0000 (08:24 +0000)]
procd: update to latest git revision

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36895

7 years agoubox: update to latest git revision
John Crispin [Mon, 10 Jun 2013 08:24:35 +0000 (08:24 +0000)]
ubox: update to latest git revision

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36894

7 years agosysupgrade: create state file so procd knows when a sysupgrade is in progress
John Crispin [Mon, 10 Jun 2013 08:24:31 +0000 (08:24 +0000)]
sysupgrade: create state file so procd knows when a sysupgrade is in progress

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36893

7 years agomodules: make all led and button modules used during boot priority 1
John Crispin [Mon, 10 Jun 2013 08:24:25 +0000 (08:24 +0000)]
modules: make all led and button modules used during boot priority 1

This makes sure the modules are symlinked in /etc/modules-boot.d/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892

7 years agobase-files: fix failsafe via button press
John Crispin [Mon, 10 Jun 2013 08:24:13 +0000 (08:24 +0000)]
base-files: fix failsafe via button press

entering failsafe by pressing a button during boot was broken for procd as init

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36891

7 years agobase-files: change PATH order
John Crispin [Mon, 10 Jun 2013 08:24:02 +0000 (08:24 +0000)]
base-files: change PATH order

This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36890

7 years agoiwinfo: add phyname attribute, this is useful to group networks by radio phy
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:14 +0000 (14:39 +0000)]
iwinfo: add phyname attribute, this is useful to group networks by radio phy

SVN-Revision: 36889

7 years agolibiwinfo: ignore log messages from wpa_supplicant while scanning
Jo-Philipp Wich [Sun, 9 Jun 2013 14:39:09 +0000 (14:39 +0000)]
libiwinfo: ignore log messages from wpa_supplicant while scanning

wpa_supplicant may send log and event messages intermixed with the
expected scan results.  This makes "iwinfo wlan0 scan" and LuCI
"site survey" display nothing when many AP's are around.

Eliminate the CTRL-EVENT-BSS-ADDED events, interspersed log messages,
lines with unexpected format.  Increase timeout to handle the max
number of channels (2.4, 3.6, 4.9, 5 GHz).  Insure receive buffer is
null-terminated.

Signed-off-by: Jean-Pierre Tosoni <jp.tosoni@acksys.fr>
SVN-Revision: 36888

7 years agonetifd: Improve IPv6 source-routing policies
Steven Barth [Sat, 8 Jun 2013 13:26:33 +0000 (13:26 +0000)]
netifd: Improve IPv6 source-routing policies

SVN-Revision: 36884

7 years agonetifd: bring wifi down before shutting down
Jonas Gorski [Sat, 8 Jun 2013 11:44:12 +0000 (11:44 +0000)]
netifd: bring wifi down before shutting down

works around wifiX references not being freed on network restart.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36883

7 years agolantiq: fix formating in .dts files
Luka Perkov [Sat, 8 Jun 2013 11:36:07 +0000 (11:36 +0000)]
lantiq: fix formating in .dts files

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36882

7 years agoath9k: fix paprd descriptor setup
Felix Fietkau [Fri, 7 Jun 2013 16:11:56 +0000 (16:11 +0000)]
ath9k: fix paprd descriptor setup

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36881

7 years agoath9k: improve multicast buffering handling, take care of the MORE_DATA flag properly
Felix Fietkau [Fri, 7 Jun 2013 16:04:06 +0000 (16:04 +0000)]
ath9k: improve multicast buffering handling, take care of the MORE_DATA flag properly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36880

7 years agoar71xx: disable routerboard support in the generic subtarget, enable it for the nand...
Felix Fietkau [Fri, 7 Jun 2013 13:42:50 +0000 (13:42 +0000)]
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36879