openwrt/staging/wigyori.git
6 months agobuild: Fix print without color
Hauke Mehrtens [Sun, 17 Feb 2019 18:29:08 +0000 (19:29 +0100)]
build: Fix print without color

The original patch removed the printing completely, just remove the
color.

Fixes: eabc1ddc4541  ("build: Honour NO_COLOR in include/scan.mk")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agotoolchain/binutils: Remove 2.30
Daniel Engberg [Thu, 8 Nov 2018 23:36:21 +0000 (00:36 +0100)]
toolchain/binutils: Remove 2.30

Remove binutils 2.30

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
6 months agosamba36: allow build with no ipv6 support
Rosy Song [Mon, 7 Jan 2019 06:24:47 +0000 (14:24 +0800)]
samba36: allow build with no ipv6 support

Signed-off-by: Rosy Song <rosysong@rosinson.com>
6 months agouboot-kirkwood: update to 2019.01
Paul Wassi [Thu, 27 Dec 2018 13:38:46 +0000 (14:38 +0100)]
uboot-kirkwood: update to 2019.01

Update U-Boot to current 2019.01 release for kirkwood platform

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 months agokirkwood: add kernel 4.19 support
Paul Wassi [Thu, 27 Dec 2018 14:39:36 +0000 (15:39 +0100)]
kirkwood: add kernel 4.19 support

Add patches for 4.19
Drop patch 200-disable-tso, as the packet corruption was fixed in
kernel commit 3b89624ab54b9dc2d92fc08ce2670e5f19ad8ec8

Restructure the DTS for Marvell switch in 104-ea3500 and 105-ea4500
to fix DTC warning.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 months agokernel: Added required dependencies for socket match.
Oldřich Jedlička [Tue, 29 Jan 2019 21:25:33 +0000 (22:25 +0100)]
kernel: Added required dependencies for socket match.

This applies to kernel 4.10 and newer.

See https://github.com/torvalds/linux/commit/8db4c5be88f62ffd7a552f70687a10c614dc697b

The above commit added to kernel 4.10 added new dependency
for building the NETFILTER_XT_MATCH_SOCKET (xt_socket.ko)
module. The NF_SOCKET_IPVx options (both of them) need to
be enabled in order to build the NETFILTER_XT_MATCH_SOCKET
module. Without the change the module is not built.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
6 months agox86: video: disable buildtin amdgpu DRM driver
Lucian Cristian [Wed, 6 Feb 2019 11:42:56 +0000 (13:42 +0200)]
x86: video: disable buildtin amdgpu DRM driver

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agox86: video: add amdgpu DRM kernel package
Lucian Cristian [Wed, 6 Feb 2019 11:38:05 +0000 (13:38 +0200)]
x86: video: add amdgpu DRM kernel package

build amdgpu kernel as modules so it will find the firmware files

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agox86: DRM: add x64 subtarget support
Lucian Cristian [Mon, 4 Feb 2019 10:49:23 +0000 (12:49 +0200)]
x86: DRM: add x64 subtarget support

copy settings from generic subtarget

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agox86: video: disable builtin radeon DRM driver
Lucian Cristian [Sun, 3 Feb 2019 16:57:30 +0000 (18:57 +0200)]
x86: video: disable builtin radeon DRM driver

builtin driver can't access the /lib/firmware while booting,
module driver will be able to read and load the firmware files

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agox86: video: add radeon DRM module support
Lucian Cristian [Sun, 3 Feb 2019 16:53:48 +0000 (18:53 +0200)]
x86: video: add radeon DRM module support

add radeon module support so firmware can be loaded from userland

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agolinux-firmware: DRM: add amdgpu firmware
Lucian Cristian [Tue, 5 Feb 2019 22:08:10 +0000 (00:08 +0200)]
linux-firmware: DRM: add amdgpu firmware

add firmware needed for amdgpu DRM display

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agolinux-firmware: DRM: add radeon firmware
Lucian Cristian [Sun, 3 Feb 2019 16:44:16 +0000 (18:44 +0200)]
linux-firmware: DRM: add radeon firmware

add firmware needed for radeon DRM display

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
6 months agostrace: Only allow libdw or libunwind
Hauke Mehrtens [Sat, 16 Feb 2019 22:43:50 +0000 (23:43 +0100)]
strace: Only allow libdw or libunwind

These two dependencies are mutual exclusive and it is only possible to
select one of them, change the select to a chose so it is only possible
to select one of them in OpenWrt menu config.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agostrace: fix configuration options
Peter Wagner [Sun, 10 Feb 2019 13:46:47 +0000 (14:46 +0100)]
strace: fix configuration options

Signed-off-by: Peter Wagner <tripolar@gmx.at>
6 months agoelfutils: fix DEPENDS for libelf
Peter Wagner [Sun, 10 Feb 2019 13:45:32 +0000 (14:45 +0100)]
elfutils: fix DEPENDS for libelf

Signed-off-by: Peter Wagner <tripolar@gmx.at>
6 months agobuild: Accept BIN_DIR parameter for legacy-images
Sven Eckelmann [Mon, 11 Feb 2019 15:26:42 +0000 (16:26 +0100)]
build: Accept BIN_DIR parameter for legacy-images

BIN_DIR can be set to overwrite the output path for new images. This is an
advertised feature for the imagebuilder and is used by systems like
LibreMesh's chef.

The legacy images are build using a new sub-make which doesn't receive the
variable overwrites of the parent make process. As result, the BIN_DIR is
automatically defined to the default value from rules.mk. The images will
therefore not be placed in the output path which was selected by the user.

Providing BIN_DIR as an explicit variable override to the sub-make works
around this problem.

Fixes: 26c771452cd8 ("image.mk: add LegacyDevice wrapper to allow legacy image building code to be used for device profiles")
Reported-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agokernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14
Yangbo Lu [Fri, 15 Feb 2019 03:03:14 +0000 (11:03 +0800)]
kernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14

CONFIG_USB_IMX21_HCD should be handled in generic config and
module package. So moved it into generic config.
This also fixed build issue (kernel config question) of layerscape
armv8_32b since it also used ARCH_MXC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[Deactivate CONFIG_USB_IMX21_HCD also for kernel 4.19]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: fix: A64 unstable timer
Oskari Lemmela [Sun, 27 Jan 2019 18:20:18 +0000 (20:20 +0200)]
sunxi: fix: A64 unstable timer

Backport A64 unstable timer patches from linux 5.1

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
[Split the single patch into the two original patches]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: add support for Sinovoip Banana Pi M2 Plus
Pawel Dembicki [Fri, 15 Feb 2019 15:08:53 +0000 (16:08 +0100)]
sunxi: add support for Sinovoip Banana Pi M2 Plus

CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E)
Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212)
Onboard header: SPI, I2C, GPIO, UART
USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG

Untested:
Audio, Video

Not working:
Bluetooth

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
6 months agolinux-firmware: broadcom: package 43430a0 FullMAC firmware
Pawel Dembicki [Fri, 15 Feb 2019 15:05:43 +0000 (16:05 +0100)]
linux-firmware: broadcom: package 43430a0 FullMAC firmware

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
6 months agoopenssl: patch to fix devcrypto sessions leak
Eneas U de Queiroz [Fri, 15 Feb 2019 22:35:19 +0000 (22:35 +0000)]
openssl: patch to fix devcrypto sessions leak

Applies a patch from https://github.com/openssl/openssl/pull/8213
that fixes an error where open /dev/crypto sessions were not closed.
Thanks to Ansuel Smith for reporting it.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
6 months agobuild: Honour NO_COLOR in include/scan.mk
R. Diez [Mon, 21 Jan 2019 18:32:06 +0000 (18:32 +0000)]
build: Honour NO_COLOR in include/scan.mk

The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Hi all:

This is my first OpenWrt patch. I am a clean, pure newbie! 8-)

Honour NO_COLOR in Makefile function 'progress' in include/scan.mk, in the same way that include/verbose.mk does.

Signed-off-by: R. Diez <rdiezmail-openwrt@yahoo.com>
6 months agox86: image: add test module to bootloader
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:39:36 +0000 (21:39 +0100)]
x86: image: add test module to bootloader

It was previously added in 546fced, which was part of "intel-microcode:
load as early as possible" series.
Unfortunately the conditionals added to GRUB config caused error on boot,
because on sysupgrade, bootloader is not updated and is left with old
features/modules. Since this module is needed for early microcode load
and transition to this needs to be done step by step, enable the test
module now, so that every newly created image has it already embedded.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
6 months agobuild: remove leftovers from previous x86 commits
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:37:47 +0000 (21:37 +0100)]
build: remove leftovers from previous x86 commits

VBoxManage is not used and the image is created with proper permisions:
0f5d0f6  image: use internal qemu-img for vmdk and vdi images drop host
         dependencies on qemu-utils and VirtualBox

Unreachable config symbols:
9e0759e  x86: merge all geode based subtargets into one

No need to define those symbols since x86_64 is subtarget of x86:
196fb76  x86: make x86_64 a subtarget instead of a standalone target

Unreachable config symbols, so remove GRUB_ROOT:
371b382  x86: remove the xen_domu subtarget

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
6 months agoconfig: kernel: Fix missing symbol on brcm2708 with CGROUPS
Daniel F. Dickinson [Thu, 10 Jan 2019 03:08:26 +0000 (22:08 -0500)]
config: kernel: Fix missing symbol on brcm2708 with CGROUPS

When CGROUP block io is enabled a new symbol is exposed and needs to
be set or unset else kernel oldconfig hangs waiting for input during
normal OpenWrt builds.  Therefore add sane defaults for this symbol
in that case.  Also, the defaults brcm2708 are different than generic
defaults because the platform's defconfig enables BLK_DEV_THROTTLING
by default (in defconfig config from the patches used to match
upstream's kernel, not in OpenWrt config-4.xx).

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
[make KERNEL_BLK_DEV_THROTTLING_LOW depend on KERNEL_BLK_DEV_THROTTLING]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agoar71xx: Fix 5 GHz MAC address for Archer C60 v2
Adrian Schmutzler [Sat, 26 Jan 2019 16:59:45 +0000 (17:59 +0100)]
ar71xx: Fix 5 GHz MAC address for Archer C60 v2

Looks like C60 v2 needs the MAC address to be calculated
manually, while the C60 v1 gets it correctly without manual
interference.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
6 months agokernel: Remove CONFIG_UDF_NLS for kernel 4.19
Rosen Penev [Wed, 13 Feb 2019 01:03:09 +0000 (17:03 -0800)]
kernel: Remove CONFIG_UDF_NLS for kernel 4.19

kernel 4.18 removed the symbol and made NLS implicit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
6 months agomdadm: Update to 4.1
Rosen Penev [Thu, 14 Feb 2019 21:07:58 +0000 (13:07 -0800)]
mdadm: Update to 4.1

Tested on GnuBee PC1.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
6 months agoiw: update to 5.0.1
Deng Qingfang [Sat, 9 Feb 2019 06:18:41 +0000 (14:18 +0800)]
iw: update to 5.0.1

Refresh patches

MIPS IPK size increases:
iw-tiny: +3k
iw-full: +10k

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
[Remove sha256, nan, bloom, measurements and ftm from tiny version]
[sync nl80211 between backports and iw]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agomac80211: update to version 4.19.23-1
Hauke Mehrtens [Fri, 15 Feb 2019 17:43:55 +0000 (18:43 +0100)]
mac80211: update to version 4.19.23-1

This updates mac80211 to backports version 4.19.23-1 which includes all
the stable fixes from kernel 4.19.23.
The removed patches are included in this version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agodnsmasq: ensure test and rc order as older than final releases
Jonas Gorski [Sun, 17 Feb 2019 12:04:40 +0000 (13:04 +0100)]
dnsmasq: ensure test and rc order as older than final releases

Opkg treats text after a version number as higher than without:

 ~# opkg compare-versions "2.80rc1" "<<" "2.80"; echo $?
 1
 ~# opkg compare-versions "2.80rc1" ">>" "2.80"; echo $?
 0

This causes opkg not offering final release as upgradable version, and
even refusing to update, since it thinks the installed version is
higher.

This can be mitigated by adding ~ between the version and the text, as ~
will order as less than everything except itself. Since 'r' < 't', to
make sure that test will be treated as lower than rc we add a second ~
before the test tag. That way, the ordering becomes

  2.80~~test < 2.80~rc < 2.80

which then makes opkg properly treat prerelease versions as lower.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
6 months agohostapd: update the fix for a race condition in mesh new peer handling
Felix Fietkau [Sun, 17 Feb 2019 15:04:08 +0000 (16:04 +0100)]
hostapd: update the fix for a race condition in mesh new peer handling

Prevent the mesh authentication state machine from getting reset on bogus
new peer discovery

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 months agohostapd: enable CONFIG_DEBUG_SYSLOG for wpa_supplicant
Felix Fietkau [Sun, 17 Feb 2019 12:04:12 +0000 (13:04 +0100)]
hostapd: enable CONFIG_DEBUG_SYSLOG for wpa_supplicant

It was already enabled for wpad builds and since commit 6a15077e2d7fa
the script relies on it. Size impact is minimal (2 kb on MIPS .ipk).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 months agoipset: add support for hash(ip,mac)
Alin Nastac [Thu, 7 Feb 2019 16:13:30 +0000 (17:13 +0100)]
ipset: add support for hash(ip,mac)

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 months agokernel: bump 4.19 to 4.19.23
Koen Vandeputte [Fri, 15 Feb 2019 10:09:35 +0000 (11:09 +0100)]
kernel: bump 4.19 to 4.19.23

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agokernel: bump 4.14 to 4.14.101
Koen Vandeputte [Fri, 15 Feb 2019 10:09:09 +0000 (11:09 +0100)]
kernel: bump 4.14 to 4.14.101

Refreshed all patches.

Fixes:
- CVE-2019-3819

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agokernel: bump 4.9 to 4.9.158
Koen Vandeputte [Fri, 15 Feb 2019 10:05:42 +0000 (11:05 +0100)]
kernel: bump 4.9 to 4.9.158

Refreshed all patches.

Fixes:
- CVE-2019-3819

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agobusybox: update to 1.30.1
Hannu Nyman [Thu, 14 Feb 2019 18:51:10 +0000 (20:51 +0200)]
busybox: update to 1.30.1

Minor bugfix release. Fixes for
 * bc/dc
 * sed (backslash parsing for 'w' command)
 * ip (vlan fixes)
 * grep (fixes for -x -v)
 * ls (-i compat)

No need to refresh patches or config defaults

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
7 months agoipq40xx: fix ipq40xx_setup_macs for Linksys EA6350v3
Oever González [Thu, 14 Feb 2019 00:13:07 +0000 (18:13 -0600)]
ipq40xx: fix ipq40xx_setup_macs for Linksys EA6350v3

This commit fixes the script that sets the MAC address of the LAN
switch. The LAN MAC address should be the WAN MAC address plus one.

Without this patch the WAN and the LAN interface will use the same
MAC address and an error will be generated.

With this patch all interfaces will have a different MAC address,
consecutive in the following order: WAN, LAN, radio0 and radio1.

Signed-off-by: Oever González <notengobattery@gmail.com>
7 months agoipq8064: Enabling sata port ipq8064 based devices
Roman Glova [Tue, 12 Feb 2019 01:59:00 +0000 (20:59 -0500)]
ipq8064: Enabling sata port ipq8064 based devices

(original text here: https://patchwork.kernel.org/patch/8686761/)

On some SOCs PORTS_IMPL register value is never programmed by the BIOS
and left at zero value. Which means that no sata ports are avaiable for
software. AHCI driver used to cope up with this by fabricating the
port_map if the PORTS_IMPL register is read zero, but recent patch
broke this workaround as zero value was valid for nvme disks.
This patch adds ports-implemented dt bindings as workaround for this issue
in a way that DT can dictate the port_map incase where the SOCs does not
program it already.

This patch is equal to commits:
67f8425d0ee1 ("ipq8064: dts: force AP148 SATA port mapping")
2e7a2c91019c ("ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi")
in the upstream linux kernel.

Signed-off-by: Roman Glova <roman_glova@epam.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added upstream commits, reorg' commit message]

7 months agoath79: add support for I-O DATA WN-AC1600DGR
INAGAKI Hiroshi [Tue, 5 Feb 2019 08:23:58 +0000 (17:23 +0900)]
ath79: add support for I-O DATA WN-AC1600DGR

I-O DATA WN-AC1600DGR is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.

Specification:

- SoC:      Qualcomm Atheros QCA9557
- RAM:      128 MB
- Flash:    16 MB
- WLAN:     2.4/5 GHz
  - 2.4 GHz: 2T2R (SoC internal)
  - 5 GHz:   3T3R (QCA9880)
- Ethernet: 5x 10/100/1000 Mbps
  - Switch: QCA8337N
- LED/key:  6x/6x(4x buttons, 1x slide switch)
- UART:     through-hole on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of WN-AC1600DGR
2. Connect power cable to WN-AC1600DGR and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Alternative flash instruction using initramfs image:

1. Prepare a computer and TFTP server software with the IP address
"192.168.99.8" and renamed OpenWrt initramfs image
"uImageWN-AC1600DGR"
2. Connect between WN-AC1600DGR and the computer with UART
3. Connect power cable to WN-AC1600DGR, press "4" on the serial
console and enter the U-Boot console
4. execute "tftpboot" command on the console and download initramfs
image from the TFTP server
5. execute "bootm" command and boot OpenWrt
6. On initramfs image, download the sysupgrade image to the device
and perform sysupgrade with it
7. Wait ~150 seconds to complete flashing

This commit also removes unnecessary "qca,no-eeprom" property from
the ath10k wifi node.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
7 months agoath79: fix qca955x dual pci resource allocation
Santiago Piccinini [Tue, 29 Jan 2019 04:20:44 +0000 (04:20 +0000)]
ath79: fix qca955x dual pci resource allocation

Tested with a dual pci QCA9558 board (LibreRouter v1) in three
configurations: enabling pcie0 only, pcie1 only and both enabled.

Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed ML notice]
7 months agoath79: fix qca955x pcie0 memory size
Santiago Piccinini [Tue, 29 Jan 2019 04:20:56 +0000 (04:20 +0000)]
ath79: fix qca955x pcie0 memory size

Datasheet states that both PCI ranges are of 0x2000000 size:
0x1000_0000-0x11FF_FFF and 0x1200_0000-0x13FF_0000.

Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed ML notice]
7 months agoipq40xx: add support for ASUS Lyra
Marius Genheimer [Tue, 12 Feb 2019 16:19:51 +0000 (17:19 +0100)]
ipq40xx: add support for ASUS Lyra

SoC:   Qualcomm IPQ4019 (Dakota) 717 MHz, 4 cores
RAM:   256 MiB (Nanya NT5CC128M16IP-DI)
FLASH: 128 MiB (Macronix NAND)
WiFi0: Qualcomm IPQ4019 b/g/n 2x2
WiFi1: Qualcomm IPQ4019 a/n/ac 2x2
WiFi2: Qualcomm Atheros QCA9886 a/n/ac
BT:    Atheros AR3012
IN:    WPS Button, Reset Button
OUT:   RGB-LED via TI LP5523 9-channel Controller
UART:  Front of Device - 115200 N-8
       Pinout 3.3v - RX - TX - GND (Square is VCC)

Installation:
1. Transfer OpenWRT-initramfs image to the device via SSH to /tmp.
Login credentials are identical to the Web UI.

2. Login to the device via SSH.

3. Flash the initramfs image using

> mtd-write -d linux -i openwrt-image-file

4. Power-cycle the device and wait for OpenWRT to boot.

5. From there flash the OpenWRT-sysupgrade image.

Ethernet-Ports: Although labeled identically, the port next to
the power socket is the LAN port and the other one is WAN. This
is the same behavior as in the stock firmware.

Signed-off-by: Marius Genheimer <mail@f0wl.cc>
[Dropped setup_mac 02_network in favour of 05_set_iface_mac_ipq40xx.sh,
reorderd 02_network entries, added board.bin WA for the QCA9886 from ath79,
minor dts touchup, added rng to 4.19 dts]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agoipq40xx: ea6350v3: 4.19: enable pseudo rng support
Christian Lamparter [Tue, 12 Feb 2019 17:40:47 +0000 (18:40 +0100)]
ipq40xx: ea6350v3: 4.19: enable pseudo rng support

Robert Marko made a big effort to enable the rng on all
ipq40xx for 4.19, so let's continue the quest.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agogemini: Name binary "bootpart.tar.gz"
Linus Walleij [Thu, 7 Feb 2019 19:47:15 +0000 (20:47 +0100)]
gemini: Name binary "bootpart.tar.gz"

This factory binary i supposed to actually be unzipped and
untarred by the user as part of the installation process
(this NAS boots from harddisk), so name it "bootpart.tar.gz"
and not "factory.bin" so it is helpful for users.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agokernel: Add missing config option for kernel 4.19
Daniel Engberg [Fri, 8 Feb 2019 12:22:41 +0000 (13:22 +0100)]
kernel: Add missing config option for kernel 4.19

Add CONFIG_USB_ROLE_SWITCH otherwise Octeon 4.19 fails compile

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 months agompc85xx: 4.19: add missing symbol
Pawel Dembicki [Tue, 12 Feb 2019 14:17:58 +0000 (15:17 +0100)]
mpc85xx: 4.19: add missing symbol

OCEDO Panda was added in b368373f, but only for
4.14 config. This patch fix 4.19 build for generic
and p2020 subtarget.

Signed-off-by: Pawel Dembicki <p.dembicki@wb.com.pl>
7 months agoramips: change status LED for Buffalo WHR-G300N
INAGAKI Hiroshi [Sun, 3 Feb 2019 02:18:09 +0000 (11:18 +0900)]
ramips: change status LED for Buffalo WHR-G300N

Buffalo WHR-G300N has a LED for power status indication, but it is not
connected to the GPIO and cannot be controlled by the kernel. So,
WHR-G300N uses "ROUTER" LED as the system status LED instead.

This commit changes it to use "DIAG" LED insted of "ROUTER" like
WHR-G301N in ath79 target.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
7 months agoramips: various Netgear R6120 fixes
David Bauer [Fri, 1 Feb 2019 23:34:43 +0000 (00:34 +0100)]
ramips: various Netgear R6120 fixes

The R6120 has no 5GHz WLAN LED, the assigned GPIO in fact controls
the WAN LED.

Renames the LED accordingly in the device-tree.
Removes the 5GHz WLAN LED trigger.
Adds the correct WAN port LED trigger.

----

Currently, the MAC address for the Netgear R6120 is read from the NVRAM
partition. The offset for the MAC address however is not consistent
across devices or firmware versions.

Switch to using the factory partition like all other Netgear devices do.

----

The LAN ports of the R6120 are labled in reverse on the casing.

Adjust LuCI switchport numbering accordingly.

----

The WiFi eeprom offsets for the R6120 are currently wrong (5GHz offset
is bigger than the partition itself).

Fixes poor performance on 2.4 and 5 GHz.

Signed-off-by: David Bauer <mail@david-bauer.net>
7 months agoramips: add support for I-O DATA WN-AC1167GR
INAGAKI Hiroshi [Tue, 8 Jan 2019 15:20:18 +0000 (00:20 +0900)]
ramips: add support for I-O DATA WN-AC1167GR

I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.

Specification:

- SoC     : MediaTek MT7620A
- RAM     : DDR2 64 MB
- Flash   : SPI-NOR 8MB
- WLAN    : 2.4/5 GHz, 2T2R
  - 2.4 GHz: MT7620A (SoC)
  - 5 GHz  : MT7612E
- Ethernet: 10/100/1000 Mbps (ext. MT7530)
- LED/key : 4x/3x (2x buttons, 1x slide-switch)
- UART    : through-hole on PCB
  - J2: TX, GND, RX, Vcc from SoC side
  - 115200n8

Flash instruction using factory image:

1. Boot WN-AC1167GR normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
7 months agoath79: proper indentation in image/common-tp-link.mk
Paul Wassi [Sun, 6 Jan 2019 14:27:00 +0000 (15:27 +0100)]
ath79: proper indentation in image/common-tp-link.mk

Add two spaces for proper indentation in image/common-tp-link.mk

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoath79: fix port order on TL-WR841ND-v7
Paul Wassi [Sat, 5 Jan 2019 22:54:01 +0000 (23:54 +0100)]
ath79: fix port order on TL-WR841ND-v7

The switch ports are seen one to one on the case.
Also remove unneeded secondary port numbers in this
case statement.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoath79: change ledtrig on GL.iNet AR150
Paul Wassi [Fri, 4 Jan 2019 22:35:09 +0000 (23:35 +0100)]
ath79: change ledtrig on GL.iNet AR150

Change the ledtrig for LAN from netdev to switch.
Although eth1 comes out of the device at a single port,
this port is a switch-port and therefore the LED
must be triggered by that.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoath79: rename TP-LINK to TP-Link
Paul Wassi [Fri, 4 Jan 2019 21:44:08 +0000 (22:44 +0100)]
ath79: rename TP-LINK to TP-Link

Remove inconsistencies in the vendor's name.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoar71xx: fix TL-MR3220-v2 switch port order
Paul Wassi [Fri, 4 Jan 2019 21:38:17 +0000 (22:38 +0100)]
ar71xx: fix TL-MR3220-v2 switch port order

Fix the switch port order for proper display on high
level interfaces.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoar71xx: fix TL-WR741ND-v4 switch port order
Paul Wassi [Fri, 4 Jan 2019 21:37:01 +0000 (22:37 +0100)]
ar71xx: fix TL-WR741ND-v4 switch port order

Fix the switch port order for proper display on high
level interfaces.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoath79: rename TL-WR740ND-v4 to TL-WR740N-v4
Paul Wassi [Fri, 4 Jan 2019 21:26:01 +0000 (22:26 +0100)]
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4

Give the device the same name it had in ar71xx.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agoath79: fix TL-WR741ND-v4 switch port order
Paul Wassi [Fri, 4 Jan 2019 21:19:28 +0000 (22:19 +0100)]
ath79: fix TL-WR741ND-v4 switch port order

Fix the switch port order for proper display on high
level interfaces.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 months agokernel: bump 4.19 to 4.19.21
Koen Vandeputte [Wed, 13 Feb 2019 10:38:41 +0000 (11:38 +0100)]
kernel: bump 4.19 to 4.19.21

Refreshed all patches.

Remove upstreamed:
- 0007-ARM-dts-Fix-up-the-D-Link-DIR-685-MTD-partition-info.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agokernel: bump 4.14 to 4.14.99
Koen Vandeputte [Wed, 13 Feb 2019 10:38:08 +0000 (11:38 +0100)]
kernel: bump 4.14 to 4.14.99

Refreshed all patches.

Remove upstreamed:
- 950-0434-mmc-bcm2835-Recover-from-MMC_SEND_EXT_CSD.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agokernel: bump 4.9 to 4.9.156
Koen Vandeputte [Wed, 13 Feb 2019 10:33:57 +0000 (11:33 +0100)]
kernel: bump 4.9 to 4.9.156

Refreshed all patches.

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agodnsmasq: add rapid commit config option
Hans Dedecker [Wed, 13 Feb 2019 09:30:10 +0000 (10:30 +0100)]
dnsmasq: add rapid commit config option

Add config option rapidcommit to enable support for DHCPv4 rapid
commit (RFC4039)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 months agoopenssl: add package for openssl.cnf, misc changes
Eneas U de Queiroz [Wed, 30 Jan 2019 10:42:11 +0000 (08:42 -0200)]
openssl: add package for openssl.cnf, misc changes

- Add the /etc/ssl/openssl.cnf as a separate package, to avoid breaking
  the transitional mechanism, allowing libopenssl_1.0* and
  libopenssl_1.1* to coexist.

- Remove the (selecting) dependency on @KERNEL_AIO

- Use global SOURCE_DATE_EPOCH

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
7 months agoopenssl: optimizations based on ARCH/small flash
Eneas U de Queiroz [Wed, 24 Oct 2018 19:28:59 +0000 (16:28 -0300)]
openssl: optimizations based on ARCH/small flash

Add a patch to enable the option to change the default ciphersuite list
ordering to prefer ChaCha20 over AES-GCM.  This is used by default for
all platforms, except for x86_64 and aarch64. The assumption is that
only the latter have AES-specific CPU instructions and asm code that
uses them in openssl.  Chacha20Poly1305 is 3x faster than AES-256 in
systems without AES instructions, with an equivalent strength.

Disable error messages by default except for devices with small flash or
RAM, to aid debugging.

Disable ASM by default on arm platform with small flash.  Size
difference on mips and powerpc, the other platforms with small flash
devices, are not really relevant (using 100K as a threshold).  All of
the affected platforms are source-only anyway.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
7 months agoopenssl: update to version 1.1.1a
Eneas U de Queiroz [Wed, 24 Oct 2018 14:25:00 +0000 (11:25 -0300)]
openssl: update to version 1.1.1a

This version adds the following functionality:
  * TLS 1.3
  * AFALG engine support for hardware accelleration
  * x25519 ECC curve support
  * CRIME protection: disable use of compression by default
  * Support for ChaCha20 and Poly1305

Patches fixing bugs in the /dev/crypto engine were applied, from
https://github.com/openssl/openssl/pull/7585

This increses the size of the ipk binray on MIPS32 by about 32%:
old:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk

new:
912.493 bin/packages/mips_24kc/base/libopenssl1.1_1.1.1a-2_mips_24kc.ipk
239.316 bin/packages/mips_24kc/base/openssl-util_1.1.1a-2_mips_24kc.ipk

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
7 months agoopenssl: add configuration options, disable ssl3
Eneas U de Queiroz [Mon, 22 Oct 2018 14:32:56 +0000 (11:32 -0300)]
openssl: add configuration options, disable ssl3

Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine

Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.

Fixes DTLS option that was innefective before.

Disables insecure SSL3 protocol and SHA0.

Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.

Strips building dirs from CFLAGS shown in binary.

Skips the fuzz directory during build.

Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.

This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk

new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
7 months agobase-files: fix ucert verification
Felix Fietkau [Tue, 12 Feb 2019 15:37:30 +0000 (16:37 +0100)]
base-files: fix ucert verification

ucert needs to check the firmware part with metadata, but without the signature.
Use the new fwtool mode to extract that without altering the firmware image inside
the check

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 months agofwtool: add support for extracting the truncated data part to stdout
Felix Fietkau [Tue, 12 Feb 2019 15:24:14 +0000 (16:24 +0100)]
fwtool: add support for extracting the truncated data part to stdout

This allows extracing the firmware + metadata from a signed firmware without
altering the original image file

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 months agofwtool: do not strip metadata if extracting signature
Felix Fietkau [Tue, 12 Feb 2019 14:59:11 +0000 (15:59 +0100)]
fwtool: do not strip metadata if extracting signature

This allows the signature to cover the metadata area

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 months agohostapd: fix race condition in mesh new peer handling
Felix Fietkau [Tue, 12 Feb 2019 13:26:04 +0000 (14:26 +0100)]
hostapd: fix race condition in mesh new peer handling

Avoid trying to add the same station to the driver multiple times

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 months agohostapd: send wpa_supplicant logging output to syslog
Felix Fietkau [Tue, 12 Feb 2019 13:04:07 +0000 (14:04 +0100)]
hostapd: send wpa_supplicant logging output to syslog

Helpful for debugging network connectivity issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 months agomac80211: brcmfmac: backport early changes queued for the Linux 5.1
Rafał Miłecki [Tue, 12 Feb 2019 13:17:46 +0000 (14:17 +0100)]
mac80211: brcmfmac: backport early changes queued for the Linux 5.1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 months agomac80211: brcmfmac: backport remaining patches from the Linux 5.0
Rafał Miłecki [Tue, 12 Feb 2019 12:43:06 +0000 (13:43 +0100)]
mac80211: brcmfmac: backport remaining patches from the Linux 5.0

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 months agoiproute2: tc: reduce size of dynamic symbol table
Tony Ambardar [Fri, 14 Dec 2018 07:49:32 +0000 (23:49 -0800)]
iproute2: tc: reduce size of dynamic symbol table

In the case of SHARED_LIBS=y, don't use -export-dynamic to place *all*
symbols into the dynamic symbol table. Instead, use --dynamic-list to
export a smaller set of symbols similar to that defined in static-syms.h
in the case of SHARED_LIBS=n, avoiding an 11 KB tc package size increase.

Also increment PKG_RELEASE.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoiproute2: tc: enable and fix support for using .so plugins
Tony Ambardar [Thu, 13 Dec 2018 19:48:55 +0000 (11:48 -0800)]
iproute2: tc: enable and fix support for using .so plugins

This enables using the tc module m_xt.so, which uses the act_ipt kernel
module to allow tc actions based on iptables targets. e.g.

   tc filter add dev eth0 parent 1: prio 10 protocol ip \
   u32 match u32 0 0 action xt -j DSCP --set-dscp-class BE

Make the SHARED_LIBS parameter configurable and based on tc package
selection.

Fix a problem using the tc m_xt.so plugin as also described in
https://bugs.debian.org/868059:

  Sync include/xtables.h from iptables to make sure the right offset is
  used when accessing structure members defined in libxtables. One could
  get “Extension does not know id …” otherwise. (See also: #868059)

Patch to sync the included xtables.h with system iptables 1.6.x. This
continues to work with iptables 1.8.2.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoiproute2: simplify linking libelf for eBFP/XDP object file support
Tony Ambardar [Sat, 24 Nov 2018 00:33:45 +0000 (16:33 -0800)]
iproute2: simplify linking libelf for eBFP/XDP object file support

Simplify build and runtime dependencies on libelf, which allows tc and ip
to load BPF and XDP object files respectively.

Preserve optionality of libelf by having configuration script follow the
HAVE_ELF environment variable, used similarly to the HAVE_MNL variable.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoiproute2: use tc package variant to limit other package sizes
Tony Ambardar [Sun, 16 Dec 2018 02:26:48 +0000 (18:26 -0800)]
iproute2: use tc package variant to limit other package sizes

Replace the old 'tc' with a singleton package variant which will be used
to enable additional functionality and limit it only to tc. Non-variant
packages will only be installed during 'tiny' variant builds, hence will
be configured without extra features, thus preserving previously limited
functionality and reduced package sizes.

Also set ip-tiny as the default variant, and install 'tiny' versions of
development libraries.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoiproute2: simplify Makefile, patches and fix feature detection
Tony Ambardar [Sat, 24 Nov 2018 07:56:24 +0000 (23:56 -0800)]
iproute2: simplify Makefile, patches and fix feature detection

Compile-based feature detection (e.g. xtables, ipset support) was broken
due to silent compilation errors in the configure script, caused by a
Makefile variable KERNEL_INCLUDE referring to kernel build headers. Use
userspace headers by setting the same "user_headers" kernel include path
as used for the iptables build.

Remove redundant or unused Build/Configure definitions from package
Makefile, including KERNEL_INCLUDE, LIBC_INCLUDE and DBM includes.

Don't pass LDFLAGS within MAKE_FLAGS as this interferes with LDFLAGS in
tc/Makefile and masks a link parameter ("-Wl,-export-dynamic"). Instead,
use standard TARGET_LDFLAGS.

Replace EXTRA_CCOPTS in MAKE_FLAGS with cleaner TARGET_CPPFLAGS, and also
drop now unneeded patch 150-extra-ccopts.patch.

Enable defining XT_LIB_DIR from Makefile, needed to set the iptables
modules directory to something other than /lib/xtables, and also add
libxtables dependency. Both are needed with working xtables detection.
Note that libxtables is also pulled in by iptables, firewall or luci, so
this change has no size impact in most cases.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoiproute2: fix broken configuration patch
Tony Ambardar [Fri, 23 Nov 2018 09:09:23 +0000 (01:09 -0800)]
iproute2: fix broken configuration patch

Since v4.13, iproute2 switched to a config.mk file with greater use of
pkg-config for library/feature detection. Replace the old Config patch
with one modifying the configure script but enabling the same changes:
 - explicitly disable TC_CONFIG_ATM
 - rely on feature detection for IP_CONFIG_SETNS and TC_CONFIG_XT

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agobase-files: enable BPF JIT sysctl by default
Tony Ambardar [Tue, 18 Dec 2018 06:13:22 +0000 (22:13 -0800)]
base-files: enable BPF JIT sysctl by default

Set net.core.bpf_jit_enable=1 in /etc/sysctl.d/10-default.conf.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel: enable CONFIG_BPF_JIT by default
Tony Ambardar [Tue, 18 Dec 2018 05:29:33 +0000 (21:29 -0800)]
kernel: enable CONFIG_BPF_JIT by default

Enable the built-in BPF JIT compiler for all 4.9, 4.14 and 4.19 kernels,
which should speed up cBPF and eBPF-based packet filtering (tc, iptables)
and packet sniffing (libpcap, tcpdump, fwknopd, etc).

This has minimal kernel size impact, increasing the size of uImage-lzma
(normally ~2 MB on mips_24kc or mips64el_mips64) by 5 KB for the MIPS32
arch cBPF JIT and by 9 KB for the MIPS64 arch eBPF JIT, on kernel 4.14.

With JIT enabled (cBPF only), the standard BPF test module (test_bpf.ko)
running on a DIR-835 (mips_24kc) used 33 CPU seconds, but 68 without JIT.

This change aligns with the notion of OpenWRT as the network go-to swiss
army knife for packet handling, especially on CPU-constrained platforms.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel/modules: add kmod-bpf-test package
Tony Ambardar [Mon, 19 Nov 2018 17:16:48 +0000 (09:16 -0800)]
kernel/modules: add kmod-bpf-test package

Add the test_bpf module that runs various test vectors against the BPF
interpreter or BPF JIT compiler. The module must be manually loaded, as
with the kmod-crypto-test module which serves a similar purpose.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel/modules: add kmod-sched-bpf package
Tony Ambardar [Fri, 26 Oct 2018 09:16:32 +0000 (02:16 -0700)]
kernel/modules: add kmod-sched-bpf package

Add cls_bpf and act_bpf modules for additional tc classifier and action
support of cBPF and eBPF.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel/modules: add kmod-sched-ipset package
Tony Ambardar [Tue, 30 Oct 2018 13:27:04 +0000 (06:27 -0700)]
kernel/modules: add kmod-sched-ipset package

Add em_ipset module to support tc filter classification by IP set. Build
as a standalone package to help avoid pulling in rest of kmod-sched and
isolate new dependency on kmod-ipt-ipset.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel/modules: kmod-sched: add some common, useful actions
Tony Ambardar [Tue, 30 Oct 2018 12:50:51 +0000 (05:50 -0700)]
kernel/modules: kmod-sched: add some common, useful actions

Add act_pedit, act_csum, act_gact and act_simple modules for additional
tc action support. Module act_simple helps with debug and logging, similar
to iptables LOG target, while act_gact provides common generic actions.
Modules act_pedit and act_csum support general packet mangling, and have
been the subject of feature requests and forum discussions (e.g. DSCP),
as well as being added to the Turris OS fork of OpenWrt ~2 years ago.

Also select dependency kmod-lib-crc32c to support act_csum.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agokernel/modules: kmod-sched-core: add missing dependency, useful module
Tony Ambardar [Tue, 30 Oct 2018 12:50:51 +0000 (05:50 -0700)]
kernel/modules: kmod-sched-core: add missing dependency, useful module

All tc ematch modules, including those in kmod-sched-core and kmod-sched,
use cls_basic as a core dependency. Relocate cls_basic from kmod-sched to
kmod-sched-core to avoid requiring kmod-sched unnecessarily.

This change is also backwards compatible since any past tc ematch users
will have had to install both kmod-sched-core and kmod-sched anyway.

Add the matchall kernel module cls_matchall introduced in kernel 4.8. The
matchall classifier matches every packet and allows the user to apply
actions on it. It is a simpler, more efficient replacement for the common
but cryptic tc classifier idiom "u32 match u32 0 0".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
7 months agoath79: add support for Xiaomi Mi Router 4Q
David Bauer [Fri, 1 Feb 2019 19:48:41 +0000 (20:48 +0100)]
ath79: add support for Xiaomi Mi Router 4Q

Hardware
--------
CPU:   Qualcomm Atheros QCA9561
RAM:   64M DDR2
FLASH: 16M SPI-NOR
ETH:   1x WAN - 2x LAN
WiFi:  QCA9561 3T3R
BTN:   1x Reset - 1x WPS
LED:   1x Blue - 1x Red - 1x Yellow
UART:  TX - GND - RX - VCC (From ethernet port)
       115200n8 - 3.3V

Installation
------------
1. Connect to the device via UART.

2. Interrupt the U-Boot on power-on by pressing enter when prompted.

3. Connect you computer to one of the routers LAN ports.
   Assign yourself the IP 192.168.31.10/24.
   Copy the OpenWRT initramfs image to a tftp server root directory.
   Rename the image to 'x4q.bin'.

4. Load the initramfs image to the router by executing following command
   in U-Boot. The image will boot afterwards.

   > tftpboot 0x81000000 x4q.bin; bootm

5. SCP the sysupgrade-image into '/tmp'.
   Remember to assign yourself an IP in 192.168.1.0/24 for this step!

6. Install OpenWRT permanently by executing

   > sysupgrade -n /tmp/<OpenWRT-sysupgrade-image>

Signed-off-by: David Bauer <mail@david-bauer.net>
7 months agogemini: Fix kmod-led-trig-heartbeat typo
Linus Walleij [Thu, 7 Feb 2019 19:47:07 +0000 (20:47 +0100)]
gemini: Fix kmod-led-trig-heartbeat typo

It's kmod-ledtrig-* not kmod-led-trig-*.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[extended subject]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agomac80211: ath10k: support for management rate control
Sven Eckelmann [Fri, 8 Feb 2019 20:20:20 +0000 (21:20 +0100)]
mac80211: ath10k: support for management rate control

Issues a wmi command to firmware when multicast rate change is received with the
new BSS_CHANGED_MCAST_RATE flag.  Also fixes the incorrect fixed_rate setting
for CCK rates which got introduced with addition of ath10k_rates_rev2 enum.

By default the firmware uses 1Mbps and 6Mbps rate for management packets
in 2G and 5G bands respectively. But when the user selects different
basic rates from the userspace, we need to send the management
packets at the lowest basic rate selected by the user.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
7 months agoath10k-ct: support for management rate control
Sven Eckelmann [Fri, 8 Feb 2019 20:20:20 +0000 (21:20 +0100)]
ath10k-ct: support for management rate control

By default the firmware uses 1Mbps and 6Mbps rate for management packets
in 2G and 5G bands respectively. But when the user selects different
basic rates from the userspace, we need to send the management
packets at the lowest basic rate selected by the user.

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the
management packets rate to the firmware.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
7 months agoath10k-firmware: update Candela Tech firmware images
Christian Lamparter [Sun, 10 Feb 2019 17:27:45 +0000 (18:27 +0100)]
ath10k-firmware: update Candela Tech firmware images

Release notes since last time:

2019-02-08:
  Fix rate-ctrl assert related to bad logic that tried to guess
  that lower bandwidth probes were automatically successful if
  higher was. The NSS mismatch that can happen here caused the
  assert. Just comment out the offending code
  (per comment from original QCA code). This is bug 69.

2019-02-10:
  Fix bssid mis-alignment that broke 4-addr vlan mode (bug 67).
  Original buggy commit was
  commit 2bf89e70ecd1 ("dev-ds: Better packing of wal_vdev struct.")

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agobuild: add KERNEL_ENTRY and sort DEFAULT_DEVICE_VARS
Christian Lamparter [Wed, 6 Feb 2019 16:41:49 +0000 (17:41 +0100)]
build: add KERNEL_ENTRY and sort DEFAULT_DEVICE_VARS

The KERNEL_ENTRY was missing from the DEFAULT_DEVICE_VARS.

This bug was discovered while preparing alternative images
for the mpc85xx's TP-Link WDR4900-V1, which all failed to
boot due to this:
|## Booting kernel from Legacy Image at 02000000 ...
|   Image Name:   POWERPC OpenWrt Linux-4.14.96
|   Image Type:   PowerPC Linux Kernel Image (uncompressed)
|   Data Size:    2056568 Bytes = 2 MiB
|   Load Address: 01000000
|   Entry Point:  00000000
|   Verifying Checksum ... OK

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
7 months agomac80211: brcmfmac: fix a possible NULL pointer dereference
Rafał Miłecki [Mon, 11 Feb 2019 10:25:54 +0000 (11:25 +0100)]
mac80211: brcmfmac: fix a possible NULL pointer dereference

This fixes a possible crash in the brcmf_fw_request_nvram_done():
[   31.687293] Backtrace:
[   31.689760] [<c004fb4c>] (__wake_up_common) from [<c004fc38>] (__wake_up_locked+0x1c/0x24)
[   31.698043]  r10:c6794000 r9:00000009 r8:00000001 r7:bf54dda0 r6:a0000013 r5:c78e7d38
[   31.705928]  r4:c78e7d3c r3:00000000
[   31.709528] [<c004fc1c>] (__wake_up_locked) from [<c00502a8>] (complete+0x3c/0x4c)
[   31.717148] [<c005026c>] (complete) from [<bf54590c>] (brcmf_fw_request_nvram_done+0x5c8/0x6a4 [brcmfmac])
[   31.726818]  r7:bf54dda0 r6:c6794000 r5:00001990 r4:c6782380
[   31.732544] [<bf545344>] (brcmf_fw_request_nvram_done [brcmfmac]) from [<c0204e40>] (request_firmware_work_func+0x38/0x60)
[   31.743607]  r10:00000008 r9:c6bdd700 r8:00000000 r7:c72c3cd8 r6:c67f4300 r5:c6bda300
[   31.751493]  r4:c67f4300
[   31.754046] [<c0204e08>] (request_firmware_work_func) from [<c0034458>] (process_one_work+0x1e0/0x318)
[   31.763365]  r4:c72c3cc0
[   31.765913] [<c0034278>] (process_one_work) from [<c0035234>] (worker_thread+0x2f4/0x448)
[   31.774107]  r10:00000008 r9:00000000 r8:c6bda314 r7:c72c3cd8 r6:c6bda300 r5:c6bda300
[   31.781993]  r4:c72c3cc0
[   31.784545] [<c0034f40>] (worker_thread) from [<c003984c>] (kthread+0x100/0x114)
[   31.791949]  r10:00000000 r9:00000000 r8:00000000 r7:c0034f40 r6:c72c3cc0 r5:00000000
[   31.799836]  r4:c735dc00 r3:c79ed540
[   31.803438] [<c003974c>] (kthread) from [<c00097d0>] (ret_from_fork+0x14/0x24)
[   31.810672]  r7:00000000 r6:00000000 r5:c003974c r4:c735dc00
[   31.816378] Code: e5b53004 e1a07001 e1a06002 e243000c (e5934000)
[   31.822487] ---[ end trace a0ffbb07a810d503 ]---

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 months agoar71xx: add rssileds for xw devices
Koen Vandeputte [Mon, 11 Feb 2019 08:24:11 +0000 (09:24 +0100)]
ar71xx: add rssileds for xw devices

Commit 7ebbbda29377 ("ar71xx: ubnt-(xm,xw): fix LED RSSI indication")
adds support for using the RSSI strenght via LEDS.

The rssileds package addition got lost during altering the patch.
Add it again to fix this.

Fixes: 7ebbbda29377 ("ar71xx: ubnt-(xm,xw): fix LED RSSI indication")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 months agotools/mpfr: Update to 4.0.2
Daniel Engberg [Sun, 10 Feb 2019 11:32:19 +0000 (11:32 +0000)]
tools/mpfr: Update to 4.0.2

Update mpfr to 4.0.2
Use official site as last resort
Force thread-safety functionality
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 months agotools/bison: Update to 3.3.2
Daniel Engberg [Sun, 10 Feb 2019 12:16:30 +0000 (12:16 +0000)]
tools/bison: Update to 3.3.2

Update bison to 3.3.2
Enable pthreads support
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 months agotools/sed: Update to 4.7
Daniel Engberg [Sun, 10 Feb 2019 12:35:19 +0000 (12:35 +0000)]
tools/sed: Update to 4.7

Update sed to 4.7
Enable pthreads support

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 months agotools/tar: Update to 1.31
Daniel Engberg [Sun, 10 Feb 2019 11:53:02 +0000 (11:53 +0000)]
tools/tar: Update to 1.31

Update tar to 1.31
Fixes CVE-2018-20482
Switch to tar.xz tarball
Refresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>