From 781d4bfb397cdd12ee0151eb66c577f470e3377d Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Fri, 28 Aug 2020 13:51:48 +0200 Subject: [PATCH] ath79: mikrotik: fix network setup for lhg-hb platform This network setup for MikroTik devices based on the LHG-HB platform avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly repor- ted by eth0. Fixes: FS#3309 Signed-off-by: Roger Pueyo Centelles --- .../dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi index 86249398c9..f54e757c62 100644 --- a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-lhg-hb.dtsi @@ -67,12 +67,21 @@ }; }; -ð1 { +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + gmac-config { device = <&gmac>; + switch-phy-swap = <1>; }; }; +ð1 { + compatible = "syscon", "simple-mfd"; +}; + &pinmux { led_wan_pin: pinmux_led_wan_pin { pinctrl-single,bits = <0x4 0x0 0xff>; -- 2.30.2