From c84876702bd726ec9fd58ffa3a21c95173d2ea6b Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Fri, 8 Aug 2014 13:38:31 +0000 Subject: [PATCH] imx6: drop 3.10 support Signed-off-by: Luka Perkov SVN-Revision: 42075 --- target/linux/imx6/config-3.10 | 366 ---------- .../arch/arm/boot/dts/imx6dl-gw51xx.dts | 38 - .../arch/arm/boot/dts/imx6dl-gw52xx.dts | 48 -- .../arch/arm/boot/dts/imx6dl-gw53xx.dts | 47 -- .../arch/arm/boot/dts/imx6dl-gw54xx.dts | 43 -- .../arch/arm/boot/dts/imx6q-gw51xx.dts | 38 - .../arch/arm/boot/dts/imx6q-gw52xx.dts | 52 -- .../arch/arm/boot/dts/imx6q-gw53xx.dts | 51 -- .../arch/arm/boot/dts/imx6q-gw5400-a.dts | 438 ------------ .../arch/arm/boot/dts/imx6q-gw54xx.dts | 54 -- .../arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 245 ------- .../arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 344 --------- .../arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 367 ---------- .../arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 408 ----------- .../drivers/pci/host/pcie-designware.c | 565 --------------- .../drivers/pci/host/pcie-designware.h | 65 -- .../0001-usb-chipidea-improve-kconfig.patch | 80 --- ...-fix-the-build-error-with-randconfig.patch | 42 -- ...003-usb-chipidea-improve-kconfig-2.0.patch | 51 -- ...d-ahci-sata-support-on-imx-platforms.patch | 304 -------- ...e-the-sata-bits-definitions-of-gpr13.patch | 143 ---- ...-enable-ahci-sata-on-imx6q-platforms.patch | 66 -- ...ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch | 24 - ...upport-for-parsing-PCI-DT-ranges-pro.patch | 194 ----- ...d-PCIe-bits-to-GPR-syscon-definition.patch | 37 - ...dd-support-for-i.MX6-PCIe-controller.patch | 616 ---------------- ...VDS-general-purpose-clocks-to-i.MX6Q.patch | 70 -- ...-and-Kconfig-update-for-PCIe-support.patch | 38 - ...ARM-dts-imx6qdl-add-pcie-device-node.patch | 38 - ...ermal-add-imx-thermal-driver-support.patch | 477 ------------- ...uze100-add-pfuze100-regulator-driver.patch | 667 ------------------ ...00-REGULATOR_PFUZE100-needs-to-selec.patch | 44 -- ...00-fix-build-warning-and-correct-the.patch | 35 - ...00-add-MODULE_LICENSE-in-pfuze100-dr.patch | 21 - ...fuze100-Use-i2c_-set-get-_clientdata.patch | 32 - ...tor-pfuze100-Fix-module-alias-prefix.patch | 19 - ...100-Use-regulator_map_voltage_ascend.patch | 22 - ...00-Fix-n_voltages-setting-for-SW2-SW.patch | 67 -- ...00-Simplify-pfuze100_set_ramp_delay-.patch | 56 -- ...00-Fix-off-by-one-for-max_register-s.patch | 23 - ...ator-pfuze100-allow-misprogrammed-ID.patch | 32 - ...030-pcie-designware-fix-io-transfers.patch | 58 -- .../0031-PCI-imx6-init-must-be-early.patch | 24 - ...PCI-imx6-fix-imprecise-abort-handler.patch | 36 - .../0033-PCI-imx6-increase-link-startup.patch | 24 - ...PCI-imx6-add-support-for-legacy-irqs.patch | 43 -- .../0050-sky2-allow-mac-to-come-from-dt.patch | 69 -- .../imx6/patches-3.10/0060-flexcan.patch | 92 --- ...correct-clock-as-base-for-bit-rate-c.patch | 37 - .../010-pcie-backport-fixes.patch | 45 -- .../imx6/patches-3.10/100-bootargs.patch | 13 - .../patches-3.10/110-gateworks-ventana.patch | 263 ------- .../imx6/patches-3.10/120-ventana-init.ptach | 70 -- 53 files changed, 7141 deletions(-) delete mode 100644 target/linux/imx6/config-3.10 delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi delete mode 100644 target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi delete mode 100644 target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.c delete mode 100644 target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.h delete mode 100644 target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch delete mode 100644 target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch delete mode 100644 target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch delete mode 100644 target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch delete mode 100644 target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch delete mode 100644 target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch delete mode 100644 target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch delete mode 100644 target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch delete mode 100644 target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch delete mode 100644 target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch delete mode 100644 target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch delete mode 100644 target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch delete mode 100644 target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch delete mode 100644 target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch delete mode 100644 target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch delete mode 100644 target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch delete mode 100644 target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch delete mode 100644 target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch delete mode 100644 target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch delete mode 100644 target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch delete mode 100644 target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch delete mode 100644 target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch delete mode 100644 target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch delete mode 100644 target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch delete mode 100644 target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch delete mode 100644 target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch delete mode 100644 target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch delete mode 100644 target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch delete mode 100644 target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch delete mode 100644 target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch delete mode 100644 target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch delete mode 100644 target/linux/imx6/patches-3.10/0060-flexcan.patch delete mode 100644 target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch delete mode 100644 target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch delete mode 100644 target/linux/imx6/patches-3.10/100-bootargs.patch delete mode 100644 target/linux/imx6/patches-3.10/110-gateworks-ventana.patch delete mode 100644 target/linux/imx6/patches-3.10/120-ventana-init.ptach diff --git a/target/linux/imx6/config-3.10 b/target/linux/imx6/config-3.10 deleted file mode 100644 index 21433fc76c..0000000000 --- a/target/linux/imx6/config-3.10 +++ /dev/null @@ -1,366 +0,0 @@ -CONFIG_AHCI_IMX=y -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_ARCH_BCM is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_CPUFREQ=y -CONFIG_ARCH_HAS_OPP=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SUNXI is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARCH_VIRT is not set -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -# CONFIG_ARCH_WM8850 is not set -CONFIG_ARM=y -# CONFIG_ARM_APPENDED_DTB is not set -# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set -# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set -# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set -# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_IMX6Q_CPUFREQ=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUTO_ZRELADDR=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_XZ=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_IMX_UART_PORT=1 -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_PINCTRL is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_FEC=y -CONFIG_FRAME_POINTER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CPUFREQ_CPU0=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_IMX2_WDT=y -# CONFIG_IMX_DMA is not set -# CONFIG_IMX_SDMA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_WORK=y -CONFIG_JBD=y -CONFIG_JBD2=y -CONFIG_KTIME_SCALAR=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LOCAL_TIMERS=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_M25PXX_USE_FAST_READ=y -# CONFIG_MACH_EUKREA_CPUIMX51SD is not set -# CONFIG_MACH_IMX51_DT is not set -# CONFIG_MACH_MX51_BABBAGE is not set -CONFIG_MDIO_BOARDINFO=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_MXC is not set -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ESDHC_IMX=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MPCORE_WATCHDOG is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_GPMI_NAND=y -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_PHYSMAP_OF is not set -# CONFIG_MTD_SM_COMMON is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_BLOCK is not set -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -# CONFIG_MX3_IPU is not set -# CONFIG_MXC_DEBUG_BOARD is not set -# CONFIG_MXC_IRQ_PRIOR is not set -CONFIG_MXS_DMA=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DEVICE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_I2C=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_PCI=y -CONFIG_PCIE_DW=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_IMX6=y -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCONF=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX6Q=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINMUX=y -CONFIG_PM_OPP=y -CONFIG_PPS=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_RATIONAL=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_ANATOP=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_DUMMY is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_PFUZE100=y -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_RFKILL_REGULATOR is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_IMXDI is not set -# CONFIG_RTC_DRV_MXC is not set -# CONFIG_SAMSUNG_USB2PHY is not set -# CONFIG_SAMSUNG_USB3PHY is not set -# CONFIG_SAMSUNG_USBPHY is not set -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -# CONFIG_SOC_IMX53 is not set -CONFIG_SOC_IMX6Q=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_IMX=y -CONFIG_SPI_MASTER=y -CONFIG_STMP_DEVICE=y -CONFIG_STOP_MACHINE=y -# CONFIG_SWP_EMULATE is not set -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_TEGRA_HOST1X is not set -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_XZ=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UID16=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_ARCH_HAS_XHCI=y -# CONFIG_USB_MXS_PHY is not set -CONFIG_USB_PHY=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VMSPLIT_2G=y -# CONFIG_VMSPLIT_3G is not set -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts deleted file mode 100644 index 113f1c6389..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-gw51xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX"; - compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; - }; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts deleted file mode 100644 index 816a2425a5..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-gw52xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX"; - compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6DL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; - }; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts deleted file mode 100644 index 967925701b..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-gw53xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX"; - compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6DL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; - }; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts deleted file mode 100644 index 76c760bac5..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-gw54xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX"; - compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; - }; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts deleted file mode 100644 index 84b08f927b..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-gw51xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX"; - compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6Q_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; - }; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts deleted file mode 100644 index 6e0558e316..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-gw52xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX"; - compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; - }; -}; - -&sata { - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts deleted file mode 100644 index 4f9319a4e2..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-gw53xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX"; - compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; - }; -}; - -&sata { - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts deleted file mode 100644 index 9677135840..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ /dev/null @@ -1,438 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6q.dtsi" - -/ { - model = "Gateworks Ventana GW5400-A"; - compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q"; - - /* these are used by bootloader for disabling nodes */ - aliases { - ethernet0 = &fec; - ethernet1 = ð1; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - sky2 = ð1; - ssi0 = &ssi1; - spi0 = &ecspi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ - default-state = "off"; - }; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - status = "okay"; - - flash: m25p80@0 { - compatible = "sst,w25q256"; - spi-max-frequency = <30000000>; - reg = <0>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <&sw4_reg>; - VDDIO-supply = <®_3p3v>; - }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ - MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; - }; -}; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts deleted file mode 100644 index abbf1aae41..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" - -/ { - model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX"; - compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; - }; -}; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; -}; - -&sata { - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi deleted file mode 100644 index 146a337b89..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/ { - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - }; - - memory { - reg = <0x10000000 0x20000000>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_5p0v: 5p0v { - compatible = "regulator-fixed"; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_3>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi deleted file mode 100644 index 186ed9d204..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/ { - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ - default-state = "off"; - }; - }; - - memory { - reg = <0x10000000 0x20000000>; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: 1p8v { - compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_5p0v: 5p0v { - compatible = "regulator-fixed"; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-ventana-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_1p8v>; - VDDIO-supply = <®_3p3v>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi deleted file mode 100644 index e7ae350ffd..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/ { - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - ethernet1 = ð1; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - sky2 = ð1; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ - default-state = "off"; - }; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: 1p8v { - compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-ventana-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_1p8v>; - VDDIO-supply = <®_3p3v>; - }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi deleted file mode 100644 index 6f66caa789..0000000000 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/ { - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - ethernet1 = ð1; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - sky2 = ð1; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ - default-state = "off"; - }; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-ventana-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <&sw4_reg>; - VDDIO-supply = <®_3p3v>; - }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.c b/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.c deleted file mode 100644 index c10e9ac9bb..0000000000 --- a/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.c +++ /dev/null @@ -1,565 +0,0 @@ -/* - * Synopsys Designware PCIe host controller driver - * - * Copyright (C) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Jingoo Han - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include "pcie-designware.h" - -/* Synopsis specific PCIE configuration registers */ -#define PCIE_PORT_LINK_CONTROL 0x710 -#define PORT_LINK_MODE_MASK (0x3f << 16) -#define PORT_LINK_MODE_1_LANES (0x1 << 16) -#define PORT_LINK_MODE_2_LANES (0x3 << 16) -#define PORT_LINK_MODE_4_LANES (0x7 << 16) - -#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C -#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) -#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8) -#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) -#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) -#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8) - -#define PCIE_MSI_ADDR_LO 0x820 -#define PCIE_MSI_ADDR_HI 0x824 -#define PCIE_MSI_INTR0_ENABLE 0x828 -#define PCIE_MSI_INTR0_MASK 0x82C -#define PCIE_MSI_INTR0_STATUS 0x830 - -#define PCIE_ATU_VIEWPORT 0x900 -#define PCIE_ATU_REGION_INBOUND (0x1 << 31) -#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) -#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) -#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) -#define PCIE_ATU_CR1 0x904 -#define PCIE_ATU_TYPE_MEM (0x0 << 0) -#define PCIE_ATU_TYPE_IO (0x2 << 0) -#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) -#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) -#define PCIE_ATU_CR2 0x908 -#define PCIE_ATU_ENABLE (0x1 << 31) -#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) -#define PCIE_ATU_LOWER_BASE 0x90C -#define PCIE_ATU_UPPER_BASE 0x910 -#define PCIE_ATU_LIMIT 0x914 -#define PCIE_ATU_LOWER_TARGET 0x918 -#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) -#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) -#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) -#define PCIE_ATU_UPPER_TARGET 0x91C - -static struct hw_pci dw_pci; - -unsigned long global_io_offset; - -static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys) -{ - return sys->private_data; -} - -int cfg_read(void __iomem *addr, int where, int size, u32 *val) -{ - *val = readl(addr); - - if (size == 1) - *val = (*val >> (8 * (where & 3))) & 0xff; - else if (size == 2) - *val = (*val >> (8 * (where & 3))) & 0xffff; - else if (size != 4) - return PCIBIOS_BAD_REGISTER_NUMBER; - - return PCIBIOS_SUCCESSFUL; -} - -int cfg_write(void __iomem *addr, int where, int size, u32 val) -{ - if (size == 4) - writel(val, addr); - else if (size == 2) - writew(val, addr + (where & 2)); - else if (size == 1) - writeb(val, addr + (where & 3)); - else - return PCIBIOS_BAD_REGISTER_NUMBER; - - return PCIBIOS_SUCCESSFUL; -} - -static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val) -{ - if (pp->ops->readl_rc) - pp->ops->readl_rc(pp, pp->dbi_base + reg, val); - else - *val = readl(pp->dbi_base + reg); -} - -static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg) -{ - if (pp->ops->writel_rc) - pp->ops->writel_rc(pp, val, pp->dbi_base + reg); - else - writel(val, pp->dbi_base + reg); -} - -int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, - u32 *val) -{ - int ret; - - if (pp->ops->rd_own_conf) - ret = pp->ops->rd_own_conf(pp, where, size, val); - else - ret = cfg_read(pp->dbi_base + (where & ~0x3), where, size, val); - - return ret; -} - -int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, - u32 val) -{ - int ret; - - if (pp->ops->wr_own_conf) - ret = pp->ops->wr_own_conf(pp, where, size, val); - else - ret = cfg_write(pp->dbi_base + (where & ~0x3), where, size, - val); - - return ret; -} - -int dw_pcie_link_up(struct pcie_port *pp) -{ - if (pp->ops->link_up) - return pp->ops->link_up(pp); - else - return 0; -} - -int __init dw_pcie_host_init(struct pcie_port *pp) -{ - struct device_node *np = pp->dev->of_node; - struct of_pci_range range; - struct of_pci_range_parser parser; - u32 val; - - if (of_pci_range_parser_init(&parser, np)) { - dev_err(pp->dev, "missing ranges property\n"); - return -EINVAL; - } - - /* Get the I/O and memory ranges from DT */ - for_each_of_pci_range(&parser, &range) { - unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; - if (restype == IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &pp->io); - pp->io.name = "I/O"; - pp->io.start = max_t(resource_size_t, - PCIBIOS_MIN_IO, - range.pci_addr + global_io_offset); - pp->io.end = min_t(resource_size_t, - IO_SPACE_LIMIT, - range.pci_addr + range.size - + global_io_offset); - pp->config.io_size = resource_size(&pp->io); - pp->config.io_bus_addr = range.pci_addr; - } - if (restype == IORESOURCE_MEM) { - of_pci_range_to_resource(&range, np, &pp->mem); - pp->mem.name = "MEM"; - pp->config.mem_size = resource_size(&pp->mem); - pp->config.mem_bus_addr = range.pci_addr; - } - if (restype == 0) { - of_pci_range_to_resource(&range, np, &pp->cfg); - pp->config.cfg0_size = resource_size(&pp->cfg)/2; - pp->config.cfg1_size = resource_size(&pp->cfg)/2; - } - } - - if (!pp->dbi_base) { - pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start, - resource_size(&pp->cfg)); - if (!pp->dbi_base) { - dev_err(pp->dev, "error with ioremap\n"); - return -ENOMEM; - } - } - - pp->cfg0_base = pp->cfg.start; - pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size; - pp->io_base = pp->io.start; - pp->mem_base = pp->mem.start; - - pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base, - pp->config.cfg0_size); - if (!pp->va_cfg0_base) { - dev_err(pp->dev, "error with ioremap in function\n"); - return -ENOMEM; - } - pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base, - pp->config.cfg1_size); - if (!pp->va_cfg1_base) { - dev_err(pp->dev, "error with ioremap\n"); - return -ENOMEM; - } - - if (of_property_read_u32(np, "num-lanes", &pp->lanes)) { - dev_err(pp->dev, "Failed to parse the number of lanes\n"); - return -EINVAL; - } - - if (pp->ops->host_init) - pp->ops->host_init(pp); - - dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); - - /* program correct class for RC */ - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); - - dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); - val |= PORT_LOGIC_SPEED_CHANGE; - dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); - - dw_pci.nr_controllers = 1; - dw_pci.private_data = (void **)&pp; - - pci_common_init(&dw_pci); - pci_assign_unassigned_resources(); -#ifdef CONFIG_PCI_DOMAINS - dw_pci.domain++; -#endif - - return 0; -} - -static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) -{ - /* Program viewport 0 : OUTBOUND : CFG0 */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, - PCIE_ATU_VIEWPORT); - dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1, - PCIE_ATU_LIMIT); - dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); - dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); - dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); -} - -static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) -{ - /* Program viewport 1 : OUTBOUND : CFG1 */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, - PCIE_ATU_VIEWPORT); - dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); - dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1, - PCIE_ATU_LIMIT); - dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); - dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); -} - -static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) -{ - /* Program viewport 0 : OUTBOUND : MEM */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, - PCIE_ATU_VIEWPORT); - dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); - dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1, - PCIE_ATU_LIMIT); - dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET); - dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr), - PCIE_ATU_UPPER_TARGET); -} - -static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) -{ - /* Program viewport 1 : OUTBOUND : IO */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, - PCIE_ATU_VIEWPORT); - dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); - dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1, - PCIE_ATU_LIMIT); - dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET); - dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr), - PCIE_ATU_UPPER_TARGET); -} - -static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val) -{ - int ret = PCIBIOS_SUCCESSFUL; - u32 address, busdev; - - busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | - PCIE_ATU_FUNC(PCI_FUNC(devfn)); - address = where & ~0x3; - - if (bus->parent->number == pp->root_bus_nr) { - dw_pcie_prog_viewport_cfg0(pp, busdev); - ret = cfg_read(pp->va_cfg0_base + address, where, size, val); - dw_pcie_prog_viewport_mem_outbound(pp); - } else { - dw_pcie_prog_viewport_cfg1(pp, busdev); - ret = cfg_read(pp->va_cfg1_base + address, where, size, val); - dw_pcie_prog_viewport_io_outbound(pp); - } - - return ret; -} - -static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, - u32 devfn, int where, int size, u32 val) -{ - int ret = PCIBIOS_SUCCESSFUL; - u32 address, busdev; - - busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | - PCIE_ATU_FUNC(PCI_FUNC(devfn)); - address = where & ~0x3; - - if (bus->parent->number == pp->root_bus_nr) { - dw_pcie_prog_viewport_cfg0(pp, busdev); - ret = cfg_write(pp->va_cfg0_base + address, where, size, val); - dw_pcie_prog_viewport_mem_outbound(pp); - } else { - dw_pcie_prog_viewport_cfg1(pp, busdev); - ret = cfg_write(pp->va_cfg1_base + address, where, size, val); - dw_pcie_prog_viewport_io_outbound(pp); - } - - return ret; -} - - -static int dw_pcie_valid_config(struct pcie_port *pp, - struct pci_bus *bus, int dev) -{ - /* If there is no link, then there is no device */ - if (bus->number != pp->root_bus_nr) { - if (!dw_pcie_link_up(pp)) - return 0; - } - - /* access only one slot on each root port */ - if (bus->number == pp->root_bus_nr && dev > 0) - return 0; - - /* - * do not read more than one device on the bus directly attached - * to RC's (Virtual Bridge's) DS side. - */ - if (bus->primary == pp->root_bus_nr && dev > 0) - return 0; - - return 1; -} - -static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - struct pcie_port *pp = sys_to_pcie(bus->sysdata); - unsigned long flags; - int ret; - - if (!pp) { - BUG(); - return -EINVAL; - } - - if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&pp->conf_lock, flags); - if (bus->number != pp->root_bus_nr) - ret = dw_pcie_rd_other_conf(pp, bus, devfn, - where, size, val); - else - ret = dw_pcie_rd_own_conf(pp, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - struct pcie_port *pp = sys_to_pcie(bus->sysdata); - unsigned long flags; - int ret; - - if (!pp) { - BUG(); - return -EINVAL; - } - - if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&pp->conf_lock, flags); - if (bus->number != pp->root_bus_nr) - ret = dw_pcie_wr_other_conf(pp, bus, devfn, - where, size, val); - else - ret = dw_pcie_wr_own_conf(pp, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static struct pci_ops dw_pcie_ops = { - .read = dw_pcie_rd_conf, - .write = dw_pcie_wr_conf, -}; - -int dw_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct pcie_port *pp; - - pp = sys_to_pcie(sys); - - if (!pp) - return 0; - - if (global_io_offset < SZ_1M && pp->config.io_size > 0) { - sys->io_offset = global_io_offset - pp->config.io_bus_addr; - pci_ioremap_io(sys->io_offset, pp->io.start); - global_io_offset += SZ_64K; - pci_add_resource_offset(&sys->resources, &pp->io, - sys->io_offset); - } - - sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr; - pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset); - - return 1; -} - -struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - struct pcie_port *pp = sys_to_pcie(sys); - - if (pp) { - pp->root_bus_nr = sys->busnr; - bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops, - sys, &sys->resources); - } else { - bus = NULL; - BUG(); - } - - return bus; -} - -int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); - - return pp->irq; -} - -static struct hw_pci dw_pci = { - .setup = dw_pcie_setup, - .scan = dw_pcie_scan_bus, - .map_irq = dw_pcie_map_irq, -}; - -void dw_pcie_setup_rc(struct pcie_port *pp) -{ - struct pcie_port_info *config = &pp->config; - u32 val; - u32 membase; - u32 memlimit; - - /* set the number of lines as 4 */ - dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); - val &= ~PORT_LINK_MODE_MASK; - switch (pp->lanes) { - case 1: - val |= PORT_LINK_MODE_1_LANES; - break; - case 2: - val |= PORT_LINK_MODE_2_LANES; - break; - case 4: - val |= PORT_LINK_MODE_4_LANES; - break; - } - dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL); - - /* set link width speed control register */ - dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val); - val &= ~PORT_LOGIC_LINK_WIDTH_MASK; - switch (pp->lanes) { - case 1: - val |= PORT_LOGIC_LINK_WIDTH_1_LANES; - break; - case 2: - val |= PORT_LOGIC_LINK_WIDTH_2_LANES; - break; - case 4: - val |= PORT_LOGIC_LINK_WIDTH_4_LANES; - break; - } - dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL); - - /* setup RC BARs */ - dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0); - dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_1); - - /* setup interrupt pins */ - dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val); - val &= 0xffff00ff; - val |= 0x00000100; - dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE); - - /* setup bus numbers */ - dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val); - val &= 0xff000000; - val |= 0x00010100; - dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS); - - /* setup memory base, memory limit */ - membase = ((u32)pp->mem_base & 0xfff00000) >> 16; - memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000; - val = memlimit | membase; - dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); - - /* setup command register */ - dw_pcie_readl_rc(pp, PCI_COMMAND, &val); - val &= 0xffff0000; - val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_SERR; - dw_pcie_writel_rc(pp, val, PCI_COMMAND); -} - -MODULE_AUTHOR("Jingoo Han "); -MODULE_DESCRIPTION("Designware PCIe host controller driver"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.h b/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.h deleted file mode 100644 index 133820f1da..0000000000 --- a/target/linux/imx6/files-3.10/drivers/pci/host/pcie-designware.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Synopsys Designware PCIe host controller driver - * - * Copyright (C) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Jingoo Han - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -struct pcie_port_info { - u32 cfg0_size; - u32 cfg1_size; - u32 io_size; - u32 mem_size; - phys_addr_t io_bus_addr; - phys_addr_t mem_bus_addr; -}; - -struct pcie_port { - struct device *dev; - u8 root_bus_nr; - void __iomem *dbi_base; - u64 cfg0_base; - void __iomem *va_cfg0_base; - u64 cfg1_base; - void __iomem *va_cfg1_base; - u64 io_base; - u64 mem_base; - spinlock_t conf_lock; - struct resource cfg; - struct resource io; - struct resource mem; - struct pcie_port_info config; - int irq; - u32 lanes; - struct pcie_host_ops *ops; -}; - -struct pcie_host_ops { - void (*readl_rc)(struct pcie_port *pp, - void __iomem *dbi_base, u32 *val); - void (*writel_rc)(struct pcie_port *pp, - u32 val, void __iomem *dbi_base); - int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val); - int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val); - int (*link_up)(struct pcie_port *pp); - void (*host_init)(struct pcie_port *pp); -}; - -extern unsigned long global_io_offset; - -int cfg_read(void __iomem *addr, int where, int size, u32 *val); -int cfg_write(void __iomem *addr, int where, int size, u32 val); -int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, u32 val); -int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val); -int dw_pcie_link_up(struct pcie_port *pp); -void dw_pcie_setup_rc(struct pcie_port *pp); -int dw_pcie_host_init(struct pcie_port *pp); -int dw_pcie_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys); -int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); diff --git a/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch b/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch deleted file mode 100644 index f8229d06b1..0000000000 --- a/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch +++ /dev/null @@ -1,80 +0,0 @@ -From: Peter Chen -Subject: [PATCH] usb: chipidea: improve kconfig - -Randy Dunlap reported this problem -on i386: - -> drivers/built-in.o: In function `ci_hdrc_host_init': -> (.text+0x2ce75c): undefined reference to `ehci_init_driver' -> -> When USB_EHCI_HCD=m and USB_CHIPIDEA=y. - -In fact, this problem is existed on all platforms which are using -chipidea driver. The root cause of this problem is the chipidea host -uses symbol exported from ehci-hcd, but chipidea core -does not depends on USB_EHCI_HCD. So, chipidea driver -will not be compiled as module if USB_EHCI_HCD=m. - -It is very hard to give a perfect solution since chipidea core -depends on USB || USB_GADGET, and chipdiea host depends on -both USB_EHCI_HCD and USB_CHIPIDEA, the same problem exists for -gadget. - -To fix this problem, we had to have below assumptions: - -- If USB_EHCI_HCD=y && USB_GADGET=y, USB_CHIPIDEA can be 'y'. - -- If USB_EHCI_HCD=m && USB_GADGET=y, USB_CHIPIDEA=m -or USB_CHIPIDEA_HOST can't be seen if USB_CHIPIDEA=y. -It will cause compile error due to no glue layer for ehci: - -> error: #error "missing bus glue for ehci-hcd" - -So, we had to compile USB_CHIPIDEA=m if USB_EHCI_HCD=m, -current ehci hcd core guarantee it. - -- If USB_EHCI_HCD=y && USB_GADGET=m, USB_CHIPIDEA=m -or USB_CHIPIDEA_UDC can't be seen if USB_CHIPIDEA=y. -Of cos, the gadget will out of working at this situation, -so the user had to compile USB_CHIPIDEA=m. - -- USB_EHCI_HCD=m && USB_GADGET=m, we can't see -USB_CHIPIDEA_HOST and USB_CHIPIDEA_UDC unless -USB_CHIPIDEA=m. - -The reason why it has above assumptions: -- If both ehci core and gadget core build as module, -the chipidea has to build as module. -- If one of ehci core or gadget core is built in, another -is built as module, we can only enable the function which -is built in, or enable both roles as modules (USB_CHIPIDEA=m), -since chipidea core driver takes care of both host and device roles. - -Signed-off-by: Peter Chen -Signed-off-by: Alexander Shishkin -Signed-off-by: Greg Kroah-Hartman ---- - drivers/usb/chipidea/Kconfig | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/usb/chipidea/Kconfig -+++ b/drivers/usb/chipidea/Kconfig -@@ -12,15 +12,15 @@ if USB_CHIPIDEA - - config USB_CHIPIDEA_UDC - bool "ChipIdea device controller" -- depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA -+ depends on USB_GADGET=y || USB_CHIPIDEA=m - help - Say Y here to enable device controller functionality of the - ChipIdea driver. - - config USB_CHIPIDEA_HOST - bool "ChipIdea host controller" -- depends on USB=y || USB=USB_CHIPIDEA -- depends on USB_EHCI_HCD=y -+ depends on USB=y -+ depends on USB_EHCI_HCD=y || USB_CHIPIDEA=m - select USB_EHCI_ROOT_HUB_TT - help - Say Y here to enable host controller functionality of the diff --git a/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch b/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch deleted file mode 100644 index e44682c3d7..0000000000 --- a/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Peter Chen -Subject: [PATCH] usb: chipidea: fix the build error with randconfig - -Using below configs, the compile will have error: -ERROR: "ehci_init_driver" undefined! - -.config: -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_DEBUG=y - -The reason is chipidea host uses symbol from ehci, but ehci -is not compiled. Let the chipidea host depend on -ehci even it is built as module. - -Signed-off-by: Peter Chen -Signed-off-by: Alexander Shishkin -Signed-off-by: Greg Kroah-Hartman ---- - drivers/usb/chipidea/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/usb/chipidea/Kconfig -+++ b/drivers/usb/chipidea/Kconfig -@@ -12,7 +12,7 @@ if USB_CHIPIDEA - - config USB_CHIPIDEA_UDC - bool "ChipIdea device controller" -- depends on USB_GADGET=y || USB_CHIPIDEA=m -+ depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m) - help - Say Y here to enable device controller functionality of the - ChipIdea driver. -@@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC - config USB_CHIPIDEA_HOST - bool "ChipIdea host controller" - depends on USB=y -- depends on USB_EHCI_HCD=y || USB_CHIPIDEA=m -+ depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m) - select USB_EHCI_ROOT_HUB_TT - help - Say Y here to enable host controller functionality of the diff --git a/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch b/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch deleted file mode 100644 index f90e7365ec..0000000000 --- a/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch +++ /dev/null @@ -1,51 +0,0 @@ -From: Lothar Waßmann -Subject: [PATCH] usb: chipidea: improve kconfig 2.0 - -This patch provides a cleaner solution to the problem described in -commit 20a677fd ("usb: chipidea: improve kconfig"). - -The goal to be achieved is to force USB_CHIPIDEA=m if either -USB_EHCI_HCD=m or USB_GADGET=m. -If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'. - -The old patch had the drawback, that USB_CHIPIDEA could be chosen as -'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a -situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from -the config options producing a compilable but dysfunctional driver. - -Signed-off-by: Lothar Waßmann -Reviewed-by: Peter Chen -Signed-off-by: Alexander Shishkin -Signed-off-by: Greg Kroah-Hartman ---- - drivers/usb/chipidea/Kconfig | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - ---- a/drivers/usb/chipidea/Kconfig -+++ b/drivers/usb/chipidea/Kconfig -@@ -1,6 +1,6 @@ - config USB_CHIPIDEA - tristate "ChipIdea Highspeed Dual Role Controller" -- depends on USB || USB_GADGET -+ depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET) - help - Say Y here if your system has a dual role high speed USB - controller based on ChipIdea silicon IP. Currently, only the -@@ -12,15 +12,14 @@ if USB_CHIPIDEA - - config USB_CHIPIDEA_UDC - bool "ChipIdea device controller" -- depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m) -+ depends on USB_GADGET - help - Say Y here to enable device controller functionality of the - ChipIdea driver. - - config USB_CHIPIDEA_HOST - bool "ChipIdea host controller" -- depends on USB=y -- depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m) -+ depends on USB_EHCI_HCD - select USB_EHCI_ROOT_HUB_TT - help - Say Y here to enable host controller functionality of the diff --git a/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch b/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch deleted file mode 100644 index c735517c7a..0000000000 --- a/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch +++ /dev/null @@ -1,304 +0,0 @@ -From: Richard Zhu -Subject: [PATCH] ahci_imx: add ahci sata support on imx platforms - -imx6q contains one Synopsys AHCI SATA controller, But it can't share -ahci_platform driver with other controllers because there are some -misalignments of the generic AHCI controller - the bits definitions of -the HBA registers, the Vendor Specific registers, the AHCI PHY clock -and the AHCI signals adjustment window(GPR13 register). - - - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', - should be configured to be '1' - - - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL - should be set to be '1'.(default 0) - - - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be - configured regarding to the frequency of AHB bus clock. - - - Configurations of the AHCI PHY clock, and the signal parameters of - the GPR13 - -Setup its own ahci sata driver, contained the imx6q specific -initialized codes, re-use the generic ahci_platform driver, and keep -the generic ahci_platform driver clean as much as possible. - -tj: patch description reformatted - -Signed-off-by: Richard Zhu -Reviewed-by: Shawn Guo -Signed-off-by: Tejun Heo ---- - drivers/ata/Kconfig | 9 ++ - drivers/ata/Makefile | 1 + - drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 246 insertions(+) - create mode 100644 drivers/ata/ahci_imx.c - ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM - - If unsure, say N. - -+config AHCI_IMX -+ tristate "Freescale i.MX AHCI SATA support" -+ depends on SATA_AHCI_PLATFORM -+ help -+ This option enables support for the Freescale i.MX SoC's -+ onboard AHCI SATA. -+ -+ If unsure, say N. -+ - config SATA_FSL - tristate "Freescale 3.0Gbps SATA support" - depends on FSL_SOC ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic - obj-$(CONFIG_SATA_SIL24) += sata_sil24.o - obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o - obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o -+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o - - # SFF w/ custom DMA - obj-$(CONFIG_PDC_ADMA) += pdc_adma.o ---- /dev/null -+++ b/drivers/ata/ahci_imx.c -@@ -0,0 +1,236 @@ -+/* -+ * Freescale IMX AHCI SATA platform driver -+ * Copyright 2013 Freescale Semiconductor, Inc. -+ * -+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "ahci.h" -+ -+enum { -+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ -+}; -+ -+struct imx_ahci_priv { -+ struct platform_device *ahci_pdev; -+ struct clk *sata_ref_clk; -+ struct clk *ahb_clk; -+ struct regmap *gpr; -+}; -+ -+static int imx6q_sata_init(struct device *dev, void __iomem *mmio) -+{ -+ int ret = 0; -+ unsigned int reg_val; -+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); -+ -+ imxpriv->gpr = -+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); -+ if (IS_ERR(imxpriv->gpr)) { -+ dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n"); -+ return PTR_ERR(imxpriv->gpr); -+ } -+ -+ ret = clk_prepare_enable(imxpriv->sata_ref_clk); -+ if (ret < 0) { -+ dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret); -+ return ret; -+ } -+ -+ /* -+ * set PHY Paremeters, two steps to configure the GPR13, -+ * one write for rest of parameters, mask of first write -+ * is 0x07fffffd, and the other one write for setting -+ * the mpll_clk_en. -+ */ -+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK -+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK -+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK -+ | IMX6Q_GPR13_SATA_SPD_MODE_MASK -+ | IMX6Q_GPR13_SATA_MPLL_SS_EN -+ | IMX6Q_GPR13_SATA_TX_ATTEN_MASK -+ | IMX6Q_GPR13_SATA_TX_BOOST_MASK -+ | IMX6Q_GPR13_SATA_TX_LVL_MASK -+ | IMX6Q_GPR13_SATA_TX_EDGE_RATE -+ , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB -+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M -+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F -+ | IMX6Q_GPR13_SATA_SPD_MODE_3P0G -+ | IMX6Q_GPR13_SATA_MPLL_SS_EN -+ | IMX6Q_GPR13_SATA_TX_ATTEN_9_16 -+ | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB -+ | IMX6Q_GPR13_SATA_TX_LVL_1_025_V); -+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, -+ IMX6Q_GPR13_SATA_MPLL_CLK_EN); -+ usleep_range(100, 200); -+ -+ /* -+ * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, -+ * and IP vendor specific register HOST_TIMER1MS. -+ * Configure CAP_SSS (support stagered spin up). -+ * Implement the port0. -+ * Get the ahb clock rate, and configure the TIMER1MS register. -+ */ -+ reg_val = readl(mmio + HOST_CAP); -+ if (!(reg_val & HOST_CAP_SSS)) { -+ reg_val |= HOST_CAP_SSS; -+ writel(reg_val, mmio + HOST_CAP); -+ } -+ reg_val = readl(mmio + HOST_PORTS_IMPL); -+ if (!(reg_val & 0x1)) { -+ reg_val |= 0x1; -+ writel(reg_val, mmio + HOST_PORTS_IMPL); -+ } -+ -+ reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; -+ writel(reg_val, mmio + HOST_TIMER1MS); -+ -+ return 0; -+} -+ -+static void imx6q_sata_exit(struct device *dev) -+{ -+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); -+ -+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, -+ !IMX6Q_GPR13_SATA_MPLL_CLK_EN); -+ clk_disable_unprepare(imxpriv->sata_ref_clk); -+} -+ -+static struct ahci_platform_data imx6q_sata_pdata = { -+ .init = imx6q_sata_init, -+ .exit = imx6q_sata_exit, -+}; -+ -+static const struct of_device_id imx_ahci_of_match[] = { -+ { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata}, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, imx_ahci_of_match); -+ -+static int imx_ahci_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *mem, *irq, res[2]; -+ const struct of_device_id *of_id; -+ const struct ahci_platform_data *pdata = NULL; -+ struct imx_ahci_priv *imxpriv; -+ struct device *ahci_dev; -+ struct platform_device *ahci_pdev; -+ int ret; -+ -+ imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); -+ if (!imxpriv) { -+ dev_err(dev, "can't alloc ahci_host_priv\n"); -+ return -ENOMEM; -+ } -+ -+ ahci_pdev = platform_device_alloc("ahci", -1); -+ if (!ahci_pdev) -+ return -ENODEV; -+ -+ ahci_dev = &ahci_pdev->dev; -+ ahci_dev->parent = dev; -+ -+ imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); -+ if (IS_ERR(imxpriv->ahb_clk)) { -+ dev_err(dev, "can't get ahb clock.\n"); -+ ret = PTR_ERR(imxpriv->ahb_clk); -+ goto err_out; -+ } -+ -+ imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); -+ if (IS_ERR(imxpriv->sata_ref_clk)) { -+ dev_err(dev, "can't get sata_ref clock.\n"); -+ ret = PTR_ERR(imxpriv->sata_ref_clk); -+ goto err_out; -+ } -+ -+ imxpriv->ahci_pdev = ahci_pdev; -+ platform_set_drvdata(pdev, imxpriv); -+ -+ of_id = of_match_device(imx_ahci_of_match, dev); -+ if (of_id) { -+ pdata = of_id->data; -+ } else { -+ ret = -EINVAL; -+ goto err_out; -+ } -+ -+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!mem || !irq) { -+ dev_err(dev, "no mmio/irq resource\n"); -+ ret = -ENOMEM; -+ goto err_out; -+ } -+ -+ res[0] = *mem; -+ res[1] = *irq; -+ -+ ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32); -+ ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask; -+ ahci_dev->of_node = dev->of_node; -+ -+ ret = platform_device_add_resources(ahci_pdev, res, 2); -+ if (ret) -+ goto err_out; -+ -+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); -+ if (ret) -+ goto err_out; -+ -+ ret = platform_device_add(ahci_pdev); -+ if (ret) { -+err_out: -+ platform_device_put(ahci_pdev); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int imx_ahci_remove(struct platform_device *pdev) -+{ -+ struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev); -+ struct platform_device *ahci_pdev = imxpriv->ahci_pdev; -+ -+ platform_device_unregister(ahci_pdev); -+ return 0; -+} -+ -+static struct platform_driver imx_ahci_driver = { -+ .probe = imx_ahci_probe, -+ .remove = imx_ahci_remove, -+ .driver = { -+ .name = "ahci-imx", -+ .owner = THIS_MODULE, -+ .of_match_table = imx_ahci_of_match, -+ }, -+}; -+module_platform_driver(imx_ahci_driver); -+ -+MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); -+MODULE_AUTHOR("Richard Zhu "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("ahci:imx"); diff --git a/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch b/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch deleted file mode 100644 index 646273af0f..0000000000 --- a/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch +++ /dev/null @@ -1,143 +0,0 @@ -From: Richard Zhu -Subject: [PATCH] ARM: imx6q: update the sata bits definitions of gpr13 - -Replace the SATA_PHY_# by the more readable definitons. - -tj: Being routed through libata branch to enable implementation of - ahci_imx. - -Signed-off-by: Richard Zhu -Acked-by: Shawn Guo -Signed-off-by: Tejun Heo ---- - include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 +++++++++++++++++++--------- - 1 file changed, 84 insertions(+), 37 deletions(-) - ---- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h -+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h -@@ -279,41 +279,88 @@ - #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29) - #define IMX6Q_GPR13_CAN1_STOP_REQ BIT(28) - #define IMX6Q_GPR13_ENET_STOP_REQ BIT(27) --#define IMX6Q_GPR13_SATA_PHY_8_MASK (0x7 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB (0x0 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB (0x1 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB (0x2 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB (0x3 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB (0x4 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB (0x5 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB (0x6 << 24) --#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB (0x7 << 24) --#define IMX6Q_GPR13_SATA_PHY_7_MASK (0x1f << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA1I (0x10 << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA1M (0x10 << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA1X (0x1a << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA2I (0x12 << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA2M (0x12 << 19) --#define IMX6Q_GPR13_SATA_PHY_7_SATA2X (0x1a << 19) --#define IMX6Q_GPR13_SATA_PHY_6_MASK (0x7 << 16) --#define IMX6Q_GPR13_SATA_SPEED_MASK BIT(15) --#define IMX6Q_GPR13_SATA_SPEED_1P5G 0x0 --#define IMX6Q_GPR13_SATA_SPEED_3P0G BIT(15) --#define IMX6Q_GPR13_SATA_PHY_5 BIT(14) --#define IMX6Q_GPR13_SATA_PHY_4_MASK (0x7 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_16_16 (0x0 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_14_16 (0x1 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_12_16 (0x2 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_10_16 (0x3 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_9_16 (0x4 << 11) --#define IMX6Q_GPR13_SATA_PHY_4_8_16 (0x5 << 11) --#define IMX6Q_GPR13_SATA_PHY_3_MASK (0xf << 7) --#define IMX6Q_GPR13_SATA_PHY_3_OFF 0x7 --#define IMX6Q_GPR13_SATA_PHY_2_MASK (0x1f << 2) --#define IMX6Q_GPR13_SATA_PHY_2_OFF 0x2 --#define IMX6Q_GPR13_SATA_PHY_1_MASK (0x3 << 0) --#define IMX6Q_GPR13_SATA_PHY_1_FAST (0x0 << 0) --#define IMX6Q_GPR13_SATA_PHY_1_MED (0x1 << 0) --#define IMX6Q_GPR13_SATA_PHY_1_SLOW (0x2 << 0) -- -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK (0x7 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB (0x0 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB (0x1 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB (0x2 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB (0x3 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB (0x4 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB (0x5 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB (0x6 << 24) -+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB (0x7 << 24) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK (0x1f << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I (0x10 << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M (0x10 << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X (0x1a << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I (0x12 << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M (0x12 << 19) -+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X (0x1a << 19) -+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK (0x7 << 16) -+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F (0x0 << 16) -+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F (0x1 << 16) -+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F (0x2 << 16) -+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F (0x3 << 16) -+#define IMX6Q_GPR13_SATA_SPD_MODE_MASK BIT(15) -+#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G 0x0 -+#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G BIT(15) -+#define IMX6Q_GPR13_SATA_MPLL_SS_EN BIT(14) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK (0x7 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16 (0x0 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16 (0x1 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16 (0x2 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16 (0x3 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16 (0x4 << 11) -+#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16 (0x5 << 11) -+#define IMX6Q_GPR13_SATA_TX_BOOST_MASK (0xf << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB (0x0 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB (0x1 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB (0x2 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB (0x3 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB (0x4 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB (0x5 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB (0x6 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB (0x7 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB (0x8 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB (0x9 << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB (0xa << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB (0xb << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB (0xc << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB (0xd << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB (0xe << 7) -+#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB (0xf << 7) -+#define IMX6Q_GPR13_SATA_TX_LVL_MASK (0x1f << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V (0x00 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V (0x01 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V (0x02 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V (0x03 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V (0x04 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V (0x05 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V (0x06 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V (0x07 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V (0x08 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V (0x09 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V (0x0a << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V (0x0b << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V (0x0c << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V (0x0d << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V (0x0e << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V (0x0f << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V (0x10 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V (0x11 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V (0x12 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V (0x13 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V (0x14 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V (0x15 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V (0x16 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V (0x17 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V (0x18 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V (0x19 << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V (0x1a << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V (0x1b << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V (0x1c << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V (0x1d << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V (0x1e << 2) -+#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2) -+#define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1) -+#define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0) - #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch b/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch deleted file mode 100644 index 5371524237..0000000000 --- a/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch +++ /dev/null @@ -1,66 +0,0 @@ -From: Richard Zhu -Subject: [PATCH] ARM: dtsi: enable ahci sata on imx6q platforms - -Only imx6q has the ahci sata controller, enable -it on imx6q platforms. - -Signed-off-by: Richard Zhu -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6q-sabreauto.dts | 4 ++++ - arch/arm/boot/dts/imx6q-sabrelite.dts | 4 ++++ - arch/arm/boot/dts/imx6q-sabresd.dts | 4 ++++ - arch/arm/boot/dts/imx6q.dtsi | 9 +++++++++ - 4 files changed, 21 insertions(+) - ---- a/arch/arm/boot/dts/imx6q-sabreauto.dts -+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts -@@ -33,3 +33,7 @@ - }; - }; - }; -+ -+&sata { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/imx6q-sabrelite.dts -+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts -@@ -65,6 +65,10 @@ - }; - }; - -+&sata { -+ status = "okay"; -+}; -+ - &ecspi1 { - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; ---- a/arch/arm/boot/dts/imx6q-sabresd.dts -+++ b/arch/arm/boot/dts/imx6q-sabresd.dts -@@ -37,3 +37,7 @@ - }; - }; - }; -+ -+&sata { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/imx6q.dtsi -+++ b/arch/arm/boot/dts/imx6q.dtsi -@@ -332,6 +332,15 @@ - }; - }; - -+ sata: sata@02200000 { -+ compatible = "fsl,imx6q-ahci"; -+ reg = <0x02200000 0x4000>; -+ interrupts = <0 39 0x04>; -+ clocks = <&clks 154>, <&clks 187>, <&clks 105>; -+ clock-names = "sata", "sata_ref", "ahb"; -+ status = "disabled"; -+ }; -+ - ipu2: ipu@02800000 { - #crtc-cells = <1>; - compatible = "fsl,imx6q-ipu"; diff --git a/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch b/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch deleted file mode 100644 index 86e7d8f0cd..0000000000 --- a/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Tejun Heo -Subject: [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON - -ahci_imx makes use of regmap but the dependency wasn't specified in -Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but -CONFIG_MFD_SYSCON is not. Add the Kconfig dependency. - -Signed-off-by: Tejun Heo -Reported-by: Stephen Rothwell ---- - drivers/ata/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM - - config AHCI_IMX - tristate "Freescale i.MX AHCI SATA support" -- depends on SATA_AHCI_PLATFORM -+ depends on SATA_AHCI_PLATFORM && MFD_SYSCON - help - This option enables support for the Freescale i.MX SoC's - onboard AHCI SATA. diff --git a/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch b/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch deleted file mode 100644 index 45e1dc263b..0000000000 --- a/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch +++ /dev/null @@ -1,194 +0,0 @@ -From: Andrew Murray -Subject: [PATCH] of/pci: Provide support for parsing PCI DT ranges property - -This patch factors out common implementation patterns to reduce overall kernel -code and provide a means for host bridge drivers to directly obtain struct -resources from the DT's ranges property without relying on architecture specific -DT handling. This will make it easier to write archiecture independent host bridge -drivers and mitigate against further duplication of DT parsing code. - -This patch can be used in the following way: - - struct of_pci_range_parser parser; - struct of_pci_range range; - - if (of_pci_range_parser_init(&parser, np)) - ; //no ranges property - - for_each_of_pci_range(&parser, &range) { - - /* - directly access properties of the address range, e.g.: - range.pci_space, range.pci_addr, range.cpu_addr, - range.size, range.flags - - alternatively obtain a struct resource, e.g.: - struct resource res; - of_pci_range_to_resource(&range, np, &res); - */ - } - -Additionally the implementation takes care of adjacent ranges and merges them -into a single range (as was the case with powerpc and microblaze). - -Signed-off-by: Andrew Murray -Signed-off-by: Liviu Dudau -Signed-off-by: Thomas Petazzoni -Reviewed-by: Rob Herring -Tested-by: Thomas Petazzoni -Tested-by: Linus Walleij -Tested-by: Jingoo Han -Acked-by: Grant Likely -Signed-off-by: Jason Cooper ---- - drivers/of/address.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/of_address.h | 48 +++++++++++++++++++++++++++++++++ - 2 files changed, 115 insertions(+) - ---- a/drivers/of/address.c -+++ b/drivers/of/address.c -@@ -224,6 +224,73 @@ int of_pci_address_to_resource(struct de - return __of_address_to_resource(dev, addrp, size, flags, NULL, r); - } - EXPORT_SYMBOL_GPL(of_pci_address_to_resource); -+ -+int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node) -+{ -+ const int na = 3, ns = 2; -+ int rlen; -+ -+ parser->node = node; -+ parser->pna = of_n_addr_cells(node); -+ parser->np = parser->pna + na + ns; -+ -+ parser->range = of_get_property(node, "ranges", &rlen); -+ if (parser->range == NULL) -+ return -ENOENT; -+ -+ parser->end = parser->range + rlen / sizeof(__be32); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(of_pci_range_parser_init); -+ -+struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser, -+ struct of_pci_range *range) -+{ -+ const int na = 3, ns = 2; -+ -+ if (!range) -+ return NULL; -+ -+ if (!parser->range || parser->range + parser->np > parser->end) -+ return NULL; -+ -+ range->pci_space = parser->range[0]; -+ range->flags = of_bus_pci_get_flags(parser->range); -+ range->pci_addr = of_read_number(parser->range + 1, ns); -+ range->cpu_addr = of_translate_address(parser->node, -+ parser->range + na); -+ range->size = of_read_number(parser->range + parser->pna + na, ns); -+ -+ parser->range += parser->np; -+ -+ /* Now consume following elements while they are contiguous */ -+ while (parser->range + parser->np <= parser->end) { -+ u32 flags, pci_space; -+ u64 pci_addr, cpu_addr, size; -+ -+ pci_space = be32_to_cpup(parser->range); -+ flags = of_bus_pci_get_flags(parser->range); -+ pci_addr = of_read_number(parser->range + 1, ns); -+ cpu_addr = of_translate_address(parser->node, -+ parser->range + na); -+ size = of_read_number(parser->range + parser->pna + na, ns); -+ -+ if (flags != range->flags) -+ break; -+ if (pci_addr != range->pci_addr + range->size || -+ cpu_addr != range->cpu_addr + range->size) -+ break; -+ -+ range->size += size; -+ parser->range += parser->np; -+ } -+ -+ return range; -+} -+EXPORT_SYMBOL_GPL(of_pci_range_parser_one); -+ - #endif /* CONFIG_PCI */ - - /* ---- a/include/linux/of_address.h -+++ b/include/linux/of_address.h -@@ -4,6 +4,36 @@ - #include - #include - -+struct of_pci_range_parser { -+ struct device_node *node; -+ const __be32 *range; -+ const __be32 *end; -+ int np; -+ int pna; -+}; -+ -+struct of_pci_range { -+ u32 pci_space; -+ u64 pci_addr; -+ u64 cpu_addr; -+ u64 size; -+ u32 flags; -+}; -+ -+#define for_each_of_pci_range(parser, range) \ -+ for (; of_pci_range_parser_one(parser, range);) -+ -+static inline void of_pci_range_to_resource(struct of_pci_range *range, -+ struct device_node *np, -+ struct resource *res) -+{ -+ res->flags = range->flags; -+ res->start = range->cpu_addr; -+ res->end = range->cpu_addr + range->size - 1; -+ res->parent = res->child = res->sibling = NULL; -+ res->name = np->full_name; -+} -+ - #ifdef CONFIG_OF_ADDRESS - extern u64 of_translate_address(struct device_node *np, const __be32 *addr); - extern bool of_can_translate_address(struct device_node *dev); -@@ -27,6 +57,11 @@ static inline unsigned long pci_address_ - #define pci_address_to_pio pci_address_to_pio - #endif - -+extern int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node); -+extern struct of_pci_range *of_pci_range_parser_one( -+ struct of_pci_range_parser *parser, -+ struct of_pci_range *range); - #else /* CONFIG_OF_ADDRESS */ - #ifndef of_address_to_resource - static inline int of_address_to_resource(struct device_node *dev, int index, -@@ -53,6 +88,19 @@ static inline const __be32 *of_get_addre - { - return NULL; - } -+ -+static inline int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node) -+{ -+ return -1; -+} -+ -+static inline struct of_pci_range *of_pci_range_parser_one( -+ struct of_pci_range_parser *parser, -+ struct of_pci_range *range) -+{ -+ return NULL; -+} - #endif /* CONFIG_OF_ADDRESS */ - - diff --git a/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch b/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch deleted file mode 100644 index 19ca079dc9..0000000000 --- a/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch +++ /dev/null @@ -1,37 +0,0 @@ -From: Sean Cross -Subject: [PATCH 1/2] ARM: imx6q: Add PCIe bits to GPR syscon definition - -PCIe requires additional bits be defined for GPR8 and GPR12. - -Signed-off-by: Sean Cross -Signed-off-by: Shawn Guo -Signed-off-by: Bjorn Helgaas ---- - include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h -+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h -@@ -241,6 +241,12 @@ - - #define IMX6Q_GPR5_L2_CLK_STOP BIT(8) - -+#define IMX6Q_GPR8_TX_SWING_LOW (0x7f << 25) -+#define IMX6Q_GPR8_TX_SWING_FULL (0x7f << 18) -+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB (0x3f << 12) -+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB (0x3f << 6) -+#define IMX6Q_GPR8_TX_DEEMPH_GEN1 (0x3f << 0) -+ - #define IMX6Q_GPR9_TZASC2_BYP BIT(1) - #define IMX6Q_GPR9_TZASC1_BYP BIT(0) - -@@ -273,7 +279,9 @@ - #define IMX6Q_GPR12_ARMP_AHB_CLK_EN BIT(26) - #define IMX6Q_GPR12_ARMP_ATB_CLK_EN BIT(25) - #define IMX6Q_GPR12_ARMP_APB_CLK_EN BIT(24) -+#define IMX6Q_GPR12_DEVICE_TYPE (0xf << 12) - #define IMX6Q_GPR12_PCIE_CTL_2 BIT(10) -+#define IMX6Q_GPR12_LOS_LEVEL (0x1f << 4) - - #define IMX6Q_GPR13_SDMA_STOP_REQ BIT(30) - #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29) diff --git a/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch b/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch deleted file mode 100644 index 599cd0e084..0000000000 --- a/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch +++ /dev/null @@ -1,616 +0,0 @@ -Subject: [PATCH 2/2] PCI: imx6: Add support for i.MX6 PCIe controller -From: Sean Cross - -Add support for the PCIe port present on the i.MX6 family of controllers. -These use the Synopsis Designware core tied to their own PHY. - -Signed-off-by: Sean Cross -Signed-off-by: Shawn Guo -Signed-off-by: Bjorn Helgaas -Acked-by: Sascha Hauer ---- - drivers/pci/host/Kconfig | 6 + - drivers/pci/host/Makefile | 1 + - drivers/pci/host/pci-imx6.c | 575 +++++++++++++++++++++ - 4 files changed, 588 insertions(+), 1 deletion(-) - create mode 100644 drivers/pci/host/pci-imx6.c - ---- /dev/null -+++ b/drivers/pci/host/Kconfig -@@ -0,0 +1,13 @@ -+menu "PCI host controller drivers" -+ depends on PCI -+ -+config PCIE_DW -+ bool -+ -+config PCI_IMX6 -+ bool "Freescale i.MX6 PCIe controller" -+ depends on SOC_IMX6Q -+ select PCIEPORTBUS -+ select PCIE_DW -+ -+endmenu ---- /dev/null -+++ b/drivers/pci/host/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_PCIE_DW) += pcie-designware.o -+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o ---- /dev/null -+++ b/drivers/pci/host/pci-imx6.c -@@ -0,0 +1,575 @@ -+/* -+ * PCIe host controller driver for Freescale i.MX6 SoCs -+ * -+ * Copyright (C) 2013 Kosagi -+ * http://www.kosagi.com -+ * -+ * Author: Sean Cross -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "pcie-designware.h" -+ -+#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp) -+ -+struct imx6_pcie { -+ int reset_gpio; -+ int power_on_gpio; -+ int wake_up_gpio; -+ int disable_gpio; -+ struct clk *lvds_gate; -+ struct clk *sata_ref_100m; -+ struct clk *pcie_ref_125m; -+ struct clk *pcie_axi; -+ struct pcie_port pp; -+ struct regmap *iomuxc_gpr; -+ void __iomem *mem_base; -+}; -+ -+/* PCIe Port Logic registers (memory-mapped) */ -+#define PL_OFFSET 0x700 -+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) -+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) -+ -+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114) -+#define PCIE_PHY_CTRL_DATA_LOC 0 -+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16 -+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17 -+#define PCIE_PHY_CTRL_WR_LOC 18 -+#define PCIE_PHY_CTRL_RD_LOC 19 -+ -+#define PCIE_PHY_STAT (PL_OFFSET + 0x110) -+#define PCIE_PHY_STAT_ACK_LOC 16 -+ -+/* PHY registers (not memory-mapped) */ -+#define PCIE_PHY_RX_ASIC_OUT 0x100D -+ -+#define PHY_RX_OVRD_IN_LO 0x1005 -+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) -+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) -+ -+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val) -+{ -+ u32 val; -+ u32 max_iterations = 10; -+ u32 wait_counter = 0; -+ -+ do { -+ val = readl(dbi_base + PCIE_PHY_STAT); -+ val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1; -+ wait_counter++; -+ -+ if (val == exp_val) -+ return 0; -+ -+ udelay(1); -+ } while (wait_counter < max_iterations); -+ -+ return -ETIMEDOUT; -+} -+ -+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr) -+{ -+ u32 val; -+ int ret; -+ -+ val = addr << PCIE_PHY_CTRL_DATA_LOC; -+ writel(val, dbi_base + PCIE_PHY_CTRL); -+ -+ val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC); -+ writel(val, dbi_base + PCIE_PHY_CTRL); -+ -+ ret = pcie_phy_poll_ack(dbi_base, 1); -+ if (ret) -+ return ret; -+ -+ val = addr << PCIE_PHY_CTRL_DATA_LOC; -+ writel(val, dbi_base + PCIE_PHY_CTRL); -+ -+ ret = pcie_phy_poll_ack(dbi_base, 0); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */ -+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data) -+{ -+ u32 val, phy_ctl; -+ int ret; -+ -+ ret = pcie_phy_wait_ack(dbi_base, addr); -+ if (ret) -+ return ret; -+ -+ /* assert Read signal */ -+ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC; -+ writel(phy_ctl, dbi_base + PCIE_PHY_CTRL); -+ -+ ret = pcie_phy_poll_ack(dbi_base, 1); -+ if (ret) -+ return ret; -+ -+ val = readl(dbi_base + PCIE_PHY_STAT); -+ *data = val & 0xffff; -+ -+ /* deassert Read signal */ -+ writel(0x00, dbi_base + PCIE_PHY_CTRL); -+ -+ ret = pcie_phy_poll_ack(dbi_base, 0); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data) -+{ -+ u32 var; -+ int ret; -+ -+ /* write addr */ -+ /* cap addr */ -+ ret = pcie_phy_wait_ack(dbi_base, addr); -+ if (ret) -+ return ret; -+ -+ var = data << PCIE_PHY_CTRL_DATA_LOC; -+ writel(var, dbi_base + PCIE_PHY_CTRL); -+ -+ /* capture data */ -+ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC); -+ writel(var, dbi_base + PCIE_PHY_CTRL); -+ -+ ret = pcie_phy_poll_ack(dbi_base, 1); -+ if (ret) -+ return ret; -+ -+ /* deassert cap data */ -+ var = data << PCIE_PHY_CTRL_DATA_LOC; -+ writel(var, dbi_base + PCIE_PHY_CTRL); -+ -+ /* wait for ack de-assertion */ -+ ret = pcie_phy_poll_ack(dbi_base, 0); -+ if (ret) -+ return ret; -+ -+ /* assert wr signal */ -+ var = 0x1 << PCIE_PHY_CTRL_WR_LOC; -+ writel(var, dbi_base + PCIE_PHY_CTRL); -+ -+ /* wait for ack */ -+ ret = pcie_phy_poll_ack(dbi_base, 1); -+ if (ret) -+ return ret; -+ -+ /* deassert wr signal */ -+ var = data << PCIE_PHY_CTRL_DATA_LOC; -+ writel(var, dbi_base + PCIE_PHY_CTRL); -+ -+ /* wait for ack de-assertion */ -+ ret = pcie_phy_poll_ack(dbi_base, 0); -+ if (ret) -+ return ret; -+ -+ writel(0x0, dbi_base + PCIE_PHY_CTRL); -+ -+ return 0; -+} -+ -+/* Added for PCI abort handling */ -+static int imx6q_pcie_abort_handler(unsigned long addr, -+ unsigned int fsr, struct pt_regs *regs) -+{ -+ /* -+ * If it was an imprecise abort, then we need to correct the -+ * return address to be _after_ the instruction. -+ */ -+ if (fsr & (1 << 10)) -+ regs->ARM_pc += 4; -+ return 0; -+} -+ -+static int imx6_pcie_assert_core_reset(struct pcie_port *pp) -+{ -+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); -+ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, -+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, -+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, -+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); -+ -+ gpio_set_value(imx6_pcie->reset_gpio, 0); -+ msleep(100); -+ gpio_set_value(imx6_pcie->reset_gpio, 1); -+ -+ return 0; -+} -+ -+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) -+{ -+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); -+ int ret; -+ -+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) -+ gpio_set_value(imx6_pcie->power_on_gpio, 1); -+ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, -+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, -+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); -+ -+ ret = clk_prepare_enable(imx6_pcie->sata_ref_100m); -+ if (ret) { -+ dev_err(pp->dev, "unable to enable sata_ref_100m\n"); -+ goto err_sata_ref; -+ } -+ -+ ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m); -+ if (ret) { -+ dev_err(pp->dev, "unable to enable pcie_ref_125m\n"); -+ goto err_pcie_ref; -+ } -+ -+ ret = clk_prepare_enable(imx6_pcie->lvds_gate); -+ if (ret) { -+ dev_err(pp->dev, "unable to enable lvds_gate\n"); -+ goto err_lvds_gate; -+ } -+ -+ ret = clk_prepare_enable(imx6_pcie->pcie_axi); -+ if (ret) { -+ dev_err(pp->dev, "unable to enable pcie_axi\n"); -+ goto err_pcie_axi; -+ } -+ -+ /* allow the clocks to stabilize */ -+ usleep_range(200, 500); -+ -+ return 0; -+ -+err_pcie_axi: -+ clk_disable_unprepare(imx6_pcie->lvds_gate); -+err_lvds_gate: -+ clk_disable_unprepare(imx6_pcie->pcie_ref_125m); -+err_pcie_ref: -+ clk_disable_unprepare(imx6_pcie->sata_ref_100m); -+err_sata_ref: -+ return ret; -+ -+} -+ -+static void imx6_pcie_init_phy(struct pcie_port *pp) -+{ -+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); -+ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, -+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); -+ -+ /* configure constant input signal to the pcie ctrl and phy */ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, -+ IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, -+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4); -+ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, -+ IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, -+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, -+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, -+ IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, -+ IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); -+} -+ -+static void imx6_pcie_host_init(struct pcie_port *pp) -+{ -+ int count = 0; -+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); -+ -+ imx6_pcie_assert_core_reset(pp); -+ -+ imx6_pcie_init_phy(pp); -+ -+ imx6_pcie_deassert_core_reset(pp); -+ -+ dw_pcie_setup_rc(pp); -+ -+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, -+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10); -+ -+ while (!dw_pcie_link_up(pp)) { -+ usleep_range(100, 1000); -+ count++; -+ if (count >= 10) { -+ dev_err(pp->dev, "phy link never came up\n"); -+ dev_dbg(pp->dev, -+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", -+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), -+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); -+ break; -+ } -+ } -+ -+ return; -+} -+ -+static int imx6_pcie_link_up(struct pcie_port *pp) -+{ -+ u32 rc, ltssm, rx_valid, temp; -+ -+ /* link is debug bit 36, debug register 1 starts at bit 32 */ -+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32)); -+ if (rc) -+ return -EAGAIN; -+ -+ /* -+ * From L0, initiate MAC entry to gen2 if EP/RC supports gen2. -+ * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2). -+ * If (MAC/LTSSM.state == Recovery.RcvrLock) -+ * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition -+ * to gen2 is stuck -+ */ -+ pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid); -+ ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F; -+ -+ if (rx_valid & 0x01) -+ return 0; -+ -+ if (ltssm != 0x0d) -+ return 0; -+ -+ dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n"); -+ -+ pcie_phy_read(pp->dbi_base, -+ PHY_RX_OVRD_IN_LO, &temp); -+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN -+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN); -+ pcie_phy_write(pp->dbi_base, -+ PHY_RX_OVRD_IN_LO, temp); -+ -+ usleep_range(2000, 3000); -+ -+ pcie_phy_read(pp->dbi_base, -+ PHY_RX_OVRD_IN_LO, &temp); -+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN -+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN); -+ pcie_phy_write(pp->dbi_base, -+ PHY_RX_OVRD_IN_LO, temp); -+ -+ return 0; -+} -+ -+static struct pcie_host_ops imx6_pcie_host_ops = { -+ .link_up = imx6_pcie_link_up, -+ .host_init = imx6_pcie_host_init, -+}; -+ -+static int imx6_add_pcie_port(struct pcie_port *pp, -+ struct platform_device *pdev) -+{ -+ int ret; -+ -+ pp->irq = platform_get_irq(pdev, 0); -+ if (!pp->irq) { -+ dev_err(&pdev->dev, "failed to get irq\n"); -+ return -ENODEV; -+ } -+ -+ pp->root_bus_nr = -1; -+ pp->ops = &imx6_pcie_host_ops; -+ -+ spin_lock_init(&pp->conf_lock); -+ ret = dw_pcie_host_init(pp); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to initialize host\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int __init imx6_pcie_probe(struct platform_device *pdev) -+{ -+ struct imx6_pcie *imx6_pcie; -+ struct pcie_port *pp; -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *dbi_base; -+ int ret; -+ -+ imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL); -+ if (!imx6_pcie) -+ return -ENOMEM; -+ -+ pp = &imx6_pcie->pp; -+ pp->dev = &pdev->dev; -+ -+ /* Added for PCI abort handling */ -+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0, -+ "imprecise external abort"); -+ -+ dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!dbi_base) { -+ dev_err(&pdev->dev, "dbi_base memory resource not found\n"); -+ return -ENODEV; -+ } -+ -+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base); -+ if (IS_ERR(pp->dbi_base)) { -+ dev_err(&pdev->dev, "unable to remap dbi_base\n"); -+ ret = PTR_ERR(pp->dbi_base); -+ goto err; -+ } -+ -+ /* Fetch GPIOs */ -+ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); -+ if (!gpio_is_valid(imx6_pcie->reset_gpio)) { -+ dev_err(&pdev->dev, "no reset-gpio defined\n"); -+ ret = -ENODEV; -+ } -+ ret = devm_gpio_request_one(&pdev->dev, -+ imx6_pcie->reset_gpio, -+ GPIOF_OUT_INIT_LOW, -+ "PCIe reset"); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to get reset gpio\n"); -+ goto err; -+ } -+ -+ imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0); -+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) { -+ ret = devm_gpio_request_one(&pdev->dev, -+ imx6_pcie->power_on_gpio, -+ GPIOF_OUT_INIT_LOW, -+ "PCIe power enable"); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to get power-on gpio\n"); -+ goto err; -+ } -+ } -+ -+ imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0); -+ if (gpio_is_valid(imx6_pcie->wake_up_gpio)) { -+ ret = devm_gpio_request_one(&pdev->dev, -+ imx6_pcie->wake_up_gpio, -+ GPIOF_IN, -+ "PCIe wake up"); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to get wake-up gpio\n"); -+ goto err; -+ } -+ } -+ -+ imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0); -+ if (gpio_is_valid(imx6_pcie->disable_gpio)) { -+ ret = devm_gpio_request_one(&pdev->dev, -+ imx6_pcie->disable_gpio, -+ GPIOF_OUT_INIT_HIGH, -+ "PCIe disable endpoint"); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to get disable-ep gpio\n"); -+ goto err; -+ } -+ } -+ -+ /* Fetch clocks */ -+ imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate"); -+ if (IS_ERR(imx6_pcie->lvds_gate)) { -+ dev_err(&pdev->dev, -+ "lvds_gate clock select missing or invalid\n"); -+ ret = PTR_ERR(imx6_pcie->lvds_gate); -+ goto err; -+ } -+ -+ imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m"); -+ if (IS_ERR(imx6_pcie->sata_ref_100m)) { -+ dev_err(&pdev->dev, -+ "sata_ref_100m clock source missing or invalid\n"); -+ ret = PTR_ERR(imx6_pcie->sata_ref_100m); -+ goto err; -+ } -+ -+ imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m"); -+ if (IS_ERR(imx6_pcie->pcie_ref_125m)) { -+ dev_err(&pdev->dev, -+ "pcie_ref_125m clock source missing or invalid\n"); -+ ret = PTR_ERR(imx6_pcie->pcie_ref_125m); -+ goto err; -+ } -+ -+ imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi"); -+ if (IS_ERR(imx6_pcie->pcie_axi)) { -+ dev_err(&pdev->dev, -+ "pcie_axi clock source missing or invalid\n"); -+ ret = PTR_ERR(imx6_pcie->pcie_axi); -+ goto err; -+ } -+ -+ /* Grab GPR config register range */ -+ imx6_pcie->iomuxc_gpr = -+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); -+ if (IS_ERR(imx6_pcie->iomuxc_gpr)) { -+ dev_err(&pdev->dev, "unable to find iomuxc registers\n"); -+ ret = PTR_ERR(imx6_pcie->iomuxc_gpr); -+ goto err; -+ } -+ -+ ret = imx6_add_pcie_port(pp, pdev); -+ if (ret < 0) -+ goto err; -+ -+ platform_set_drvdata(pdev, imx6_pcie); -+ return 0; -+ -+err: -+ return ret; -+} -+ -+static const struct of_device_id imx6_pcie_of_match[] = { -+ { .compatible = "fsl,imx6q-pcie", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match); -+ -+static struct platform_driver imx6_pcie_driver = { -+ .driver = { -+ .name = "imx6q-pcie", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(imx6_pcie_of_match), -+ }, -+}; -+ -+/* Freescale PCIe driver does not allow module unload */ -+ -+static int __init imx6_pcie_init(void) -+{ -+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe); -+} -+module_init(imx6_pcie_init); -+ -+MODULE_AUTHOR("Sean Cross "); -+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch b/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch deleted file mode 100644 index 3f1b6ebfde..0000000000 --- a/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch +++ /dev/null @@ -1,70 +0,0 @@ -From: Sean Cross -Subject: [PATCH 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q - -The i.MX6 has two general-purpose LVDS clocks that can be driven -from a variety of sources. This patch adds a mux and a gate for -both of these clocks. - -Signed-off-by: Sean Cross -Signed-off-by: Shawn Guo ---- - .../devicetree/bindings/clock/imx6q-clock.txt | 4 ++++ - arch/arm/mach-imx/clk-imx6q.c | 20 +++++++++++++++++++- - 2 files changed, 23 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt -+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt -@@ -208,6 +208,10 @@ clocks and IDs. - pll4_post_div 193 - pll5_post_div 194 - pll5_video_div 195 -+ lvds1_sel 204 -+ lvds2_sel 205 -+ lvds1_gate 206 -+ lvds2_gate 207 - - Examples: - ---- a/arch/arm/mach-imx/clk-imx6q.c -+++ b/arch/arm/mach-imx/clk-imx6q.c -@@ -205,6 +205,11 @@ static const char *vpu_axi_sels[] = { "a - static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", - "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; -+static const char *lvds_sels[] = { -+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", -+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", -+ "pcie_ref", "sata_ref", -+}; - - enum mx6q_clks { - dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, -@@ -238,7 +243,8 @@ enum mx6q_clks { - pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, - sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, -- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max -+ usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, -+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max - }; - - static struct clk *clk[clk_max]; -@@ -340,6 +346,18 @@ int __init mx6q_clocks_init(void) - base + 0xe0, 0, 2, 0, clk_enet_ref_table, - &imx_ccm_lock); - -+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); -+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); -+ -+ /* -+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be -+ * independently configured as clock inputs or outputs. We treat -+ * the "output_enable" bit as a gate, even though it's really just -+ * enabling clock output. -+ */ -+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); -+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); -+ - /* name parent_name reg idx */ - clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); - clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); diff --git a/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch b/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch deleted file mode 100644 index 25f207af07..0000000000 --- a/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 4f6723e8ff497e35c8f2fb20886fccc533c58cdb Mon Sep 17 00:00:00 2001 -From: Sean Cross -Date: Thu, 26 Sep 2013 10:45:35 +0800 -Subject: [PATCH] ARM: imx6q: clock and Kconfig update for PCIe support - -Update imx6q clock initialization and Kconfig for PCIe support. - -Signed-off-by: Sean Cross -Signed-off-by: Shawn Guo ---- - arch/arm/mach-imx/Kconfig | 2 ++ - arch/arm/mach-imx/clk-imx6q.c | 4 ++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/mach-imx/Kconfig -+++ b/arch/arm/mach-imx/Kconfig -@@ -806,6 +806,8 @@ config SOC_IMX6Q - select HAVE_IMX_SRC - select HAVE_SMP - select MFD_SYSCON -+ select MIGHT_HAVE_PCI -+ select PCI_DOMAINS if PCI - select PINCTRL - select PINCTRL_IMX6Q - select PL310_ERRATA_588369 if CACHE_PL310 ---- a/arch/arm/mach-imx/clk-imx6q.c -+++ b/arch/arm/mach-imx/clk-imx6q.c -@@ -586,6 +586,10 @@ int __init mx6q_clocks_init(void) - clk_prepare_enable(clk[usbphy2_gate]); - } - -+ /* All existing boards with PCIe use LVDS1 */ -+ if (IS_ENABLED(CONFIG_PCI_IMX6)) -+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]); -+ - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); - diff --git a/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch b/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch deleted file mode 100644 index e78d9ba8b0..0000000000 --- a/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 3a57291fa4ca7f7647d826f5b47082ef306d839f Mon Sep 17 00:00:00 2001 -From: Sean Cross -Date: Thu, 26 Sep 2013 10:51:09 +0800 -Subject: [PATCH] ARM: dts: imx6qdl: add pcie device node - -Add pcie device node for imx6qdl. - -Signed-off-by: Sean Cross -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/imx6qdl.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -108,6 +108,22 @@ - cache-level = <2>; - }; - -+ pcie: pcie@0x01000000 { -+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; -+ reg = <0x01ffc000 0x4000>; /* DBI */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */ -+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ -+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ -+ num-lanes = <1>; -+ interrupts = <0 123 0x04>; -+ clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; -+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; -+ status = "disabled"; -+ }; -+ - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 94 0x04>; diff --git a/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch b/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch deleted file mode 100644 index 0b7ac7d308..0000000000 --- a/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch +++ /dev/null @@ -1,477 +0,0 @@ -From ca3de46b50809000b5ba708634e26ad979a4a63a Mon Sep 17 00:00:00 2001 -From: Shawn Guo -Date: Mon, 24 Jun 2013 14:30:44 +0800 -Subject: [PATCH] thermal: add imx thermal driver support - -This is based on the initial imx thermal work done by -Rob Lee (Not sure if the email address is still -valid). Since he is no longer interested in the work and I have -rewritten a significant amount of the code, I just took the authorship -over from him. - -It adds the imx thermal support using Temperature Monitor (TEMPMON) -block found on some Freescale i.MX SoCs. The driver uses syscon regmap -interface to access TEMPMON control registers and calibration data, and -supports cpufreq as the cooling device. - -Signed-off-by: Shawn Guo -Signed-off-by: Eduardo Valentin ---- - .../devicetree/bindings/thermal/imx-thermal.txt | 17 + - drivers/thermal/Kconfig | 11 + - drivers/thermal/Makefile | 1 + - drivers/thermal/imx_thermal.c | 397 +++++++++++++++++++++ - 4 files changed, 426 insertions(+) - create mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.txt - create mode 100644 drivers/thermal/imx_thermal.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt -@@ -0,0 +1,17 @@ -+* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs -+ -+Required properties: -+- compatible : "fsl,imx6q-thermal" -+- fsl,tempmon : phandle pointer to system controller that contains TEMPMON -+ control registers, e.g. ANATOP on imx6q. -+- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON -+ calibration data, e.g. OCOTP on imx6q. The details about calibration data -+ can be found in SoC Reference Manual. -+ -+Example: -+ -+tempmon { -+ compatible = "fsl,imx6q-tempmon"; -+ fsl,tempmon = <&anatop>; -+ fsl,tempmon-data = <&ocotp>; -+}; ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -91,6 +91,17 @@ config THERMAL_EMULATION - because userland can easily disable the thermal policy by simply - flooding this sysfs node with low temperature values. - -+config IMX_THERMAL -+ tristate "Temperature sensor driver for Freescale i.MX SoCs" -+ depends on CPU_THERMAL -+ depends on MFD_SYSCON -+ depends on OF -+ help -+ Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. -+ It supports one critical trip point and one passive trip point. The -+ cpufreq is used as the cooling device to throttle CPUs when the -+ passive trip is crossed. -+ - config SPEAR_THERMAL - bool "SPEAr thermal sensor driver" - depends on PLAT_SPEAR ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_EXYNOS_THERMAL) += exynos_t - obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o - obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o - obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o -+obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o - obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o - obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o - ---- /dev/null -+++ b/drivers/thermal/imx_thermal.c -@@ -0,0 +1,397 @@ -+/* -+ * Copyright 2013 Freescale Semiconductor, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define REG_SET 0x4 -+#define REG_CLR 0x8 -+#define REG_TOG 0xc -+ -+#define MISC0 0x0150 -+#define MISC0_REFTOP_SELBIASOFF (1 << 3) -+ -+#define TEMPSENSE0 0x0180 -+#define TEMPSENSE0_TEMP_CNT_SHIFT 8 -+#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT) -+#define TEMPSENSE0_FINISHED (1 << 2) -+#define TEMPSENSE0_MEASURE_TEMP (1 << 1) -+#define TEMPSENSE0_POWER_DOWN (1 << 0) -+ -+#define TEMPSENSE1 0x0190 -+#define TEMPSENSE1_MEASURE_FREQ 0xffff -+ -+#define OCOTP_ANA1 0x04e0 -+ -+/* The driver supports 1 passive trip point and 1 critical trip point */ -+enum imx_thermal_trip { -+ IMX_TRIP_PASSIVE, -+ IMX_TRIP_CRITICAL, -+ IMX_TRIP_NUM, -+}; -+ -+/* -+ * It defines the temperature in millicelsius for passive trip point -+ * that will trigger cooling action when crossed. -+ */ -+#define IMX_TEMP_PASSIVE 85000 -+ -+/* -+ * The maximum die temperature on imx parts is 105C, let's give some cushion -+ * for noise and possible temperature rise between measurements. -+ */ -+#define IMX_TEMP_CRITICAL 100000 -+ -+#define IMX_POLLING_DELAY 2000 /* millisecond */ -+#define IMX_PASSIVE_DELAY 1000 -+ -+struct imx_thermal_data { -+ struct thermal_zone_device *tz; -+ struct thermal_cooling_device *cdev; -+ enum thermal_device_mode mode; -+ struct regmap *tempmon; -+ int c1, c2; /* See formula in imx_get_sensor_data() */ -+}; -+ -+static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp) -+{ -+ struct imx_thermal_data *data = tz->devdata; -+ struct regmap *map = data->tempmon; -+ static unsigned long last_temp; -+ unsigned int n_meas; -+ u32 val; -+ -+ /* -+ * Every time we measure the temperature, we will power on the -+ * temperature sensor, enable measurements, take a reading, -+ * disable measurements, power off the temperature sensor. -+ */ -+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); -+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); -+ -+ /* -+ * According to the temp sensor designers, it may require up to ~17us -+ * to complete a measurement. -+ */ -+ usleep_range(20, 50); -+ -+ regmap_read(map, TEMPSENSE0, &val); -+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); -+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); -+ -+ if ((val & TEMPSENSE0_FINISHED) == 0) { -+ dev_dbg(&tz->device, "temp measurement never finished\n"); -+ return -EAGAIN; -+ } -+ -+ n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT; -+ -+ /* See imx_get_sensor_data() for formula derivation */ -+ *temp = data->c2 + data->c1 * n_meas; -+ -+ if (*temp != last_temp) { -+ dev_dbg(&tz->device, "millicelsius: %ld\n", *temp); -+ last_temp = *temp; -+ } -+ -+ return 0; -+} -+ -+static int imx_get_mode(struct thermal_zone_device *tz, -+ enum thermal_device_mode *mode) -+{ -+ struct imx_thermal_data *data = tz->devdata; -+ -+ *mode = data->mode; -+ -+ return 0; -+} -+ -+static int imx_set_mode(struct thermal_zone_device *tz, -+ enum thermal_device_mode mode) -+{ -+ struct imx_thermal_data *data = tz->devdata; -+ -+ if (mode == THERMAL_DEVICE_ENABLED) { -+ tz->polling_delay = IMX_POLLING_DELAY; -+ tz->passive_delay = IMX_PASSIVE_DELAY; -+ } else { -+ tz->polling_delay = 0; -+ tz->passive_delay = 0; -+ } -+ -+ data->mode = mode; -+ thermal_zone_device_update(tz); -+ -+ return 0; -+} -+ -+static int imx_get_trip_type(struct thermal_zone_device *tz, int trip, -+ enum thermal_trip_type *type) -+{ -+ *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE : -+ THERMAL_TRIP_CRITICAL; -+ return 0; -+} -+ -+static int imx_get_crit_temp(struct thermal_zone_device *tz, -+ unsigned long *temp) -+{ -+ *temp = IMX_TEMP_CRITICAL; -+ return 0; -+} -+ -+static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip, -+ unsigned long *temp) -+{ -+ *temp = (trip == IMX_TRIP_PASSIVE) ? IMX_TEMP_PASSIVE : -+ IMX_TEMP_CRITICAL; -+ return 0; -+} -+ -+static int imx_bind(struct thermal_zone_device *tz, -+ struct thermal_cooling_device *cdev) -+{ -+ int ret; -+ -+ ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, -+ THERMAL_NO_LIMIT, -+ THERMAL_NO_LIMIT); -+ if (ret) { -+ dev_err(&tz->device, -+ "binding zone %s with cdev %s failed:%d\n", -+ tz->type, cdev->type, ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int imx_unbind(struct thermal_zone_device *tz, -+ struct thermal_cooling_device *cdev) -+{ -+ int ret; -+ -+ ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev); -+ if (ret) { -+ dev_err(&tz->device, -+ "unbinding zone %s with cdev %s failed:%d\n", -+ tz->type, cdev->type, ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static const struct thermal_zone_device_ops imx_tz_ops = { -+ .bind = imx_bind, -+ .unbind = imx_unbind, -+ .get_temp = imx_get_temp, -+ .get_mode = imx_get_mode, -+ .set_mode = imx_set_mode, -+ .get_trip_type = imx_get_trip_type, -+ .get_trip_temp = imx_get_trip_temp, -+ .get_crit_temp = imx_get_crit_temp, -+}; -+ -+static int imx_get_sensor_data(struct platform_device *pdev) -+{ -+ struct imx_thermal_data *data = platform_get_drvdata(pdev); -+ struct regmap *map; -+ int t1, t2, n1, n2; -+ int ret; -+ u32 val; -+ -+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "fsl,tempmon-data"); -+ if (IS_ERR(map)) { -+ ret = PTR_ERR(map); -+ dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret); -+ return ret; -+ } -+ -+ ret = regmap_read(map, OCOTP_ANA1, &val); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); -+ return ret; -+ } -+ -+ if (val == 0 || val == ~0) { -+ dev_err(&pdev->dev, "invalid sensor calibration data\n"); -+ return -EINVAL; -+ } -+ -+ /* -+ * Sensor data layout: -+ * [31:20] - sensor value @ 25C -+ * [19:8] - sensor value of hot -+ * [7:0] - hot temperature value -+ */ -+ n1 = val >> 20; -+ n2 = (val & 0xfff00) >> 8; -+ t2 = val & 0xff; -+ t1 = 25; /* t1 always 25C */ -+ -+ /* -+ * Derived from linear interpolation, -+ * Tmeas = T2 + (Nmeas - N2) * (T1 - T2) / (N1 - N2) -+ * We want to reduce this down to the minimum computation necessary -+ * for each temperature read. Also, we want Tmeas in millicelsius -+ * and we don't want to lose precision from integer division. So... -+ * milli_Tmeas = 1000 * T2 + 1000 * (Nmeas - N2) * (T1 - T2) / (N1 - N2) -+ * Let constant c1 = 1000 * (T1 - T2) / (N1 - N2) -+ * milli_Tmeas = (1000 * T2) + c1 * (Nmeas - N2) -+ * milli_Tmeas = (1000 * T2) + (c1 * Nmeas) - (c1 * N2) -+ * Let constant c2 = (1000 * T2) - (c1 * N2) -+ * milli_Tmeas = c2 + (c1 * Nmeas) -+ */ -+ data->c1 = 1000 * (t1 - t2) / (n1 - n2); -+ data->c2 = 1000 * t2 - data->c1 * n2; -+ -+ return 0; -+} -+ -+static int imx_thermal_probe(struct platform_device *pdev) -+{ -+ struct imx_thermal_data *data; -+ struct cpumask clip_cpus; -+ struct regmap *map; -+ int ret; -+ -+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon"); -+ if (IS_ERR(map)) { -+ ret = PTR_ERR(map); -+ dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret); -+ return ret; -+ } -+ data->tempmon = map; -+ -+ platform_set_drvdata(pdev, data); -+ -+ ret = imx_get_sensor_data(pdev); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to get sensor data\n"); -+ return ret; -+ } -+ -+ /* Make sure sensor is in known good state for measurements */ -+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); -+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); -+ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); -+ regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF); -+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); -+ -+ cpumask_set_cpu(0, &clip_cpus); -+ data->cdev = cpufreq_cooling_register(&clip_cpus); -+ if (IS_ERR(data->cdev)) { -+ ret = PTR_ERR(data->cdev); -+ dev_err(&pdev->dev, -+ "failed to register cpufreq cooling device: %d\n", ret); -+ return ret; -+ } -+ -+ data->tz = thermal_zone_device_register("imx_thermal_zone", -+ IMX_TRIP_NUM, 0, data, -+ &imx_tz_ops, NULL, -+ IMX_PASSIVE_DELAY, -+ IMX_POLLING_DELAY); -+ if (IS_ERR(data->tz)) { -+ ret = PTR_ERR(data->tz); -+ dev_err(&pdev->dev, -+ "failed to register thermal zone device %d\n", ret); -+ cpufreq_cooling_unregister(data->cdev); -+ return ret; -+ } -+ -+ data->mode = THERMAL_DEVICE_ENABLED; -+ -+ return 0; -+} -+ -+static int imx_thermal_remove(struct platform_device *pdev) -+{ -+ struct imx_thermal_data *data = platform_get_drvdata(pdev); -+ -+ thermal_zone_device_unregister(data->tz); -+ cpufreq_cooling_unregister(data->cdev); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM_SLEEP -+static int imx_thermal_suspend(struct device *dev) -+{ -+ struct imx_thermal_data *data = dev_get_drvdata(dev); -+ struct regmap *map = data->tempmon; -+ u32 val; -+ -+ regmap_read(map, TEMPSENSE0, &val); -+ if ((val & TEMPSENSE0_POWER_DOWN) == 0) { -+ /* -+ * If a measurement is taking place, wait for a long enough -+ * time for it to finish, and then check again. If it still -+ * does not finish, something must go wrong. -+ */ -+ udelay(50); -+ regmap_read(map, TEMPSENSE0, &val); -+ if ((val & TEMPSENSE0_POWER_DOWN) == 0) -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+static int imx_thermal_resume(struct device *dev) -+{ -+ /* Nothing to do for now */ -+ return 0; -+} -+#endif -+ -+static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops, -+ imx_thermal_suspend, imx_thermal_resume); -+ -+static const struct of_device_id of_imx_thermal_match[] = { -+ { .compatible = "fsl,imx6q-tempmon", }, -+ { /* end */ } -+}; -+ -+static struct platform_driver imx_thermal = { -+ .driver = { -+ .name = "imx_thermal", -+ .owner = THIS_MODULE, -+ .pm = &imx_thermal_pm_ops, -+ .of_match_table = of_imx_thermal_match, -+ }, -+ .probe = imx_thermal_probe, -+ .remove = imx_thermal_remove, -+}; -+module_platform_driver(imx_thermal); -+ -+MODULE_AUTHOR("Freescale Semiconductor, Inc."); -+MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:imx-thermal"); diff --git a/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch b/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch deleted file mode 100644 index cbce5e79c1..0000000000 --- a/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch +++ /dev/null @@ -1,667 +0,0 @@ -From 3784b6d64dc52ed3fbebad61a85ab9b7a687a167 Mon Sep 17 00:00:00 2001 -From: Robin Gong -Date: Thu, 25 Jul 2013 11:33:18 +0800 -Subject: [PATCH] regulator: pfuze100: add pfuze100 regulator driver - -Add pfuze100 regulator driver. - -Signed-off-by: Robin Gong -Tested-by: Steffen Trumtrar -Signed-off-by: Mark Brown ---- - .../devicetree/bindings/regulator/pfuze100.txt | 113 +++++ - drivers/regulator/Kconfig | 7 + - drivers/regulator/Makefile | 1 + - drivers/regulator/pfuze100-regulator.c | 454 +++++++++++++++++++++ - include/linux/regulator/pfuze100.h | 44 ++ - 5 files changed, 619 insertions(+) - create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt - create mode 100644 drivers/regulator/pfuze100-regulator.c - create mode 100644 include/linux/regulator/pfuze100.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt -@@ -0,0 +1,113 @@ -+PFUZE100 family of regulators -+ -+Required properties: -+- compatible: "fsl,pfuze100" -+- reg: I2C slave address -+- regulators: This is the list of child nodes that specify the regulator -+ initialization data for defined regulators. Please refer to below doc -+ Documentation/devicetree/bindings/regulator/regulator.txt. -+ -+ The valid names for regulators are: -+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 -+ -+Each regulator is defined using the standard binding for regulators. -+ -+Example: -+ -+ pmic: pfuze100@08 { -+ compatible = "fsl,pfuze100"; -+ reg = <0x08>; -+ -+ regulators { -+ sw1a_reg: sw1ab { -+ regulator-min-microvolt = <300000>; -+ regulator-max-microvolt = <1875000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-ramp-delay = <6250>; -+ }; -+ -+ sw1c_reg: sw1c { -+ regulator-min-microvolt = <300000>; -+ regulator-max-microvolt = <1875000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ sw2_reg: sw2 { -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ sw3a_reg: sw3a { -+ regulator-min-microvolt = <400000>; -+ regulator-max-microvolt = <1975000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ sw3b_reg: sw3b { -+ regulator-min-microvolt = <400000>; -+ regulator-max-microvolt = <1975000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ sw4_reg: sw4 { -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ swbst_reg: swbst { -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5150000>; -+ }; -+ -+ snvs_reg: vsnvs { -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ vref_reg: vrefddr { -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ vgen1_reg: vgen1 { -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <1550000>; -+ }; -+ -+ vgen2_reg: vgen2 { -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <1550000>; -+ }; -+ -+ vgen3_reg: vgen3 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ vgen4_reg: vgen4 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen5_reg: vgen5 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen6_reg: vgen6 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ }; ---- a/drivers/regulator/Kconfig -+++ b/drivers/regulator/Kconfig -@@ -300,6 +300,13 @@ config REGULATOR_PCF50633 - Say Y here to support the voltage regulators and convertors - on PCF50633 - -+config REGULATOR_PFUZE100 -+ tristate "Support regulators on Freescale PFUZE100 PMIC" -+ depends on I2C -+ help -+ Say y here to support the regulators found on the Freescale PFUZE100 -+ PMIC. -+ - config REGULATOR_RC5T583 - tristate "RICOH RC5T583 Power regulators" - depends on MFD_RC5T583 ---- a/drivers/regulator/Makefile -+++ b/drivers/regulator/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc137 - obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o - obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o - obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o -+obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o - obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o - obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o - obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o ---- /dev/null -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -0,0 +1,454 @@ -+/* -+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PFUZE_NUMREGS 128 -+#define PFUZE100_VOL_OFFSET 0 -+#define PFUZE100_STANDBY_OFFSET 1 -+#define PFUZE100_MODE_OFFSET 3 -+#define PFUZE100_CONF_OFFSET 4 -+ -+#define PFUZE100_DEVICEID 0x0 -+#define PFUZE100_REVID 0x3 -+#define PFUZE100_FABID 0x3 -+ -+#define PFUZE100_SW1ABVOL 0x20 -+#define PFUZE100_SW1CVOL 0x2e -+#define PFUZE100_SW2VOL 0x35 -+#define PFUZE100_SW3AVOL 0x3c -+#define PFUZE100_SW3BVOL 0x43 -+#define PFUZE100_SW4VOL 0x4a -+#define PFUZE100_SWBSTCON1 0x66 -+#define PFUZE100_VREFDDRCON 0x6a -+#define PFUZE100_VSNVSVOL 0x6b -+#define PFUZE100_VGEN1VOL 0x6c -+#define PFUZE100_VGEN2VOL 0x6d -+#define PFUZE100_VGEN3VOL 0x6e -+#define PFUZE100_VGEN4VOL 0x6f -+#define PFUZE100_VGEN5VOL 0x70 -+#define PFUZE100_VGEN6VOL 0x71 -+ -+struct pfuze_regulator { -+ struct regulator_desc desc; -+ unsigned char stby_reg; -+ unsigned char stby_mask; -+}; -+ -+struct pfuze_chip { -+ struct regmap *regmap; -+ struct device *dev; -+ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; -+ struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR]; -+}; -+ -+static const int pfuze100_swbst[] = { -+ 5000000, 5050000, 5100000, 5150000, -+}; -+ -+static const int pfuze100_vsnvs[] = { -+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, -+}; -+ -+static const struct i2c_device_id pfuze_device_id[] = { -+ {.name = "pfuze100"}, -+ {}, -+}; -+MODULE_DEVICE_TABLE(i2c, pfuze_device_id); -+ -+static const struct of_device_id pfuze_dt_ids[] = { -+ { .compatible = "fsl,pfuze100" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, pfuze_dt_ids); -+ -+static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) -+{ -+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); -+ int id = rdev->desc->id; -+ unsigned int val, ramp_bits, reg; -+ int ret; -+ -+ if (id < PFUZE100_SWBST) { -+ if (id == PFUZE100_SW1AB) -+ reg = PFUZE100_SW1ABVOL; -+ else -+ reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7; -+ regmap_read(pfuze100->regmap, reg, &val); -+ -+ if (id <= PFUZE100_SW1C) -+ ramp_delay = 25000 / (2 * ramp_delay); -+ else if (val & 0x40) -+ ramp_delay = 50000 / (4 * ramp_delay); -+ else -+ ramp_delay = 25000 / (2 * ramp_delay); -+ -+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); -+ ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0, -+ ramp_bits << 6); -+ if (ret < 0) -+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret); -+ } else -+ ret = -EACCES; -+ -+ return ret; -+} -+ -+static struct regulator_ops pfuze100_ldo_regulator_ops = { -+ .enable = regulator_enable_regmap, -+ .disable = regulator_disable_regmap, -+ .is_enabled = regulator_is_enabled_regmap, -+ .list_voltage = regulator_list_voltage_linear, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+}; -+ -+static struct regulator_ops pfuze100_fixed_regulator_ops = { -+ .list_voltage = regulator_list_voltage_linear, -+}; -+ -+static struct regulator_ops pfuze100_sw_regulator_ops = { -+ .list_voltage = regulator_list_voltage_linear, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ .set_voltage_time_sel = regulator_set_voltage_time_sel, -+ .set_ramp_delay = pfuze100_set_ramp_delay, -+}; -+ -+static struct regulator_ops pfuze100_swb_regulator_ops = { -+ .list_voltage = regulator_list_voltage_table, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ -+}; -+ -+#define PFUZE100_FIXED_REG(_name, base, voltage) \ -+ [PFUZE100_ ## _name] = { \ -+ .desc = { \ -+ .name = #_name, \ -+ .n_voltages = 1, \ -+ .ops = &pfuze100_fixed_regulator_ops, \ -+ .type = REGULATOR_VOLTAGE, \ -+ .id = PFUZE100_ ## _name, \ -+ .owner = THIS_MODULE, \ -+ .min_uV = (voltage), \ -+ .enable_reg = (base), \ -+ .enable_mask = 0x10, \ -+ }, \ -+ } -+ -+#define PFUZE100_SW_REG(_name, base, min, max, step) \ -+ [PFUZE100_ ## _name] = { \ -+ .desc = { \ -+ .name = #_name,\ -+ .n_voltages = ((max) - (min)) / (step) + 1, \ -+ .ops = &pfuze100_sw_regulator_ops, \ -+ .type = REGULATOR_VOLTAGE, \ -+ .id = PFUZE100_ ## _name, \ -+ .owner = THIS_MODULE, \ -+ .min_uV = (min), \ -+ .uV_step = (step), \ -+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ -+ .vsel_mask = 0x3f, \ -+ }, \ -+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ -+ .stby_mask = 0x3f, \ -+ } -+ -+#define PFUZE100_SWB_REG(_name, base, mask, voltages) \ -+ [PFUZE100_ ## _name] = { \ -+ .desc = { \ -+ .name = #_name, \ -+ .n_voltages = ARRAY_SIZE(voltages), \ -+ .ops = &pfuze100_swb_regulator_ops, \ -+ .type = REGULATOR_VOLTAGE, \ -+ .id = PFUZE100_ ## _name, \ -+ .owner = THIS_MODULE, \ -+ .volt_table = voltages, \ -+ .vsel_reg = (base), \ -+ .vsel_mask = (mask), \ -+ }, \ -+ } -+ -+#define PFUZE100_VGEN_REG(_name, base, min, max, step) \ -+ [PFUZE100_ ## _name] = { \ -+ .desc = { \ -+ .name = #_name, \ -+ .n_voltages = ((max) - (min)) / (step) + 1, \ -+ .ops = &pfuze100_ldo_regulator_ops, \ -+ .type = REGULATOR_VOLTAGE, \ -+ .id = PFUZE100_ ## _name, \ -+ .owner = THIS_MODULE, \ -+ .min_uV = (min), \ -+ .uV_step = (step), \ -+ .vsel_reg = (base), \ -+ .vsel_mask = 0xf, \ -+ .enable_reg = (base), \ -+ .enable_mask = 0x10, \ -+ }, \ -+ .stby_reg = (base), \ -+ .stby_mask = 0x20, \ -+ } -+ -+static struct pfuze_regulator pfuze100_regulators[] = { -+ PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), -+ PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), -+ PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), -+ PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), -+ PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), -+ PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), -+ PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), -+ PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), -+ PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000), -+ PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), -+ PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), -+ PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), -+ PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), -+ PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), -+ PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), -+}; -+ -+#ifdef CONFIG_OF -+static struct of_regulator_match pfuze100_matches[] = { -+ { .name = "sw1ab", }, -+ { .name = "sw1c", }, -+ { .name = "sw2", }, -+ { .name = "sw3a", }, -+ { .name = "sw3b", }, -+ { .name = "sw4", }, -+ { .name = "swbst", }, -+ { .name = "vsnvs", }, -+ { .name = "vrefddr", }, -+ { .name = "vgen1", }, -+ { .name = "vgen2", }, -+ { .name = "vgen3", }, -+ { .name = "vgen4", }, -+ { .name = "vgen5", }, -+ { .name = "vgen6", }, -+}; -+ -+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) -+{ -+ struct device *dev = chip->dev; -+ struct device_node *np, *parent; -+ int ret; -+ -+ np = of_node_get(dev->parent->of_node); -+ if (!np) -+ return 0; -+ -+ parent = of_find_node_by_name(np, "regulators"); -+ if (!parent) { -+ dev_err(dev, "regulators node not found\n"); -+ return -EINVAL; -+ } -+ -+ ret = of_regulator_match(dev, parent, pfuze100_matches, -+ ARRAY_SIZE(pfuze100_matches)); -+ -+ of_node_put(parent); -+ if (ret < 0) { -+ dev_err(dev, "Error parsing regulator init data: %d\n", -+ ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static inline struct regulator_init_data *match_init_data(int index) -+{ -+ return pfuze100_matches[index].init_data; -+} -+ -+static inline struct device_node *match_of_node(int index) -+{ -+ return pfuze100_matches[index].of_node; -+} -+#else -+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) -+{ -+ return NULL; -+} -+ -+static inline struct regulator_init_data *match_init_data(int index) -+{ -+ return NULL; -+} -+ -+static inline struct device_node *match_of_node(int index) -+{ -+ return NULL; -+} -+#endif -+ -+static int pfuze_identify(struct pfuze_chip *pfuze_chip) -+{ -+ unsigned int value; -+ int ret; -+ -+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value); -+ if (ret) -+ return ret; -+ -+ if (value & 0x0f) { -+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); -+ return -ENODEV; -+ } -+ -+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); -+ if (ret) -+ return ret; -+ dev_info(pfuze_chip->dev, -+ "Full lay: %x, Metal lay: %x\n", -+ (value & 0xf0) >> 4, value & 0x0f); -+ -+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value); -+ if (ret) -+ return ret; -+ dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n", -+ (value & 0xc) >> 2, value & 0x3); -+ -+ return 0; -+} -+ -+static const struct regmap_config pfuze_regmap_config = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = PFUZE_NUMREGS, -+ .cache_type = REGCACHE_RBTREE, -+}; -+ -+static int pfuze100_regulator_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct pfuze_chip *pfuze_chip; -+ struct pfuze_regulator_platform_data *pdata = -+ dev_get_platdata(&client->dev); -+ struct regulator_config config = { }; -+ int i, ret; -+ -+ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), -+ GFP_KERNEL); -+ if (!pfuze_chip) -+ return -ENOMEM; -+ -+ dev_set_drvdata(&client->dev, pfuze_chip); -+ -+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators, -+ sizeof(pfuze_chip->regulator_descs)); -+ -+ pfuze_chip->dev = &client->dev; -+ -+ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config); -+ if (IS_ERR(pfuze_chip->regmap)) { -+ ret = PTR_ERR(pfuze_chip->regmap); -+ dev_err(&client->dev, -+ "regmap allocation failed with err %d\n", ret); -+ return ret; -+ } -+ -+ ret = pfuze_identify(pfuze_chip); -+ if (ret) { -+ dev_err(&client->dev, "unrecognized pfuze chip ID!\n"); -+ return ret; -+ } -+ -+ ret = pfuze_parse_regulators_dt(pfuze_chip); -+ if (ret) -+ return ret; -+ -+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) { -+ struct regulator_init_data *init_data; -+ int val; -+ -+ if (pdata) -+ init_data = pdata->init_data[i]; -+ else -+ init_data = match_init_data(i); -+ -+ /* SW2~SW4 high bit check and modify the voltage value table */ -+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) { -+ regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL + -+ (i - PFUZE100_SW2) * 7, &val); -+ if (val & 0x40) { -+ pfuze_chip->regulator_descs[i].desc.min_uV -+ = 800000; -+ pfuze_chip->regulator_descs[i].desc.uV_step -+ = 50000; -+ } -+ } -+ -+ config.dev = &client->dev; -+ config.init_data = init_data; -+ config.driver_data = pfuze_chip; -+ config.of_node = match_of_node(i); -+ -+ pfuze_chip->regulators[i] = regulator_register(&pfuze_chip -+ ->regulator_descs[i].desc, &config); -+ if (IS_ERR(pfuze_chip->regulators[i])) { -+ dev_err(&client->dev, "register regulator%s failed\n", -+ pfuze100_regulators[i].desc.name); -+ ret = PTR_ERR(pfuze_chip->regulators[i]); -+ while (--i >= 0) -+ regulator_unregister(pfuze_chip->regulators[i]); -+ return ret; -+ } -+ } -+ -+ return 0; -+} -+ -+static int pfuze100_regulator_remove(struct i2c_client *client) -+{ -+ int i; -+ struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev); -+ -+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) -+ regulator_unregister(pfuze_chip->regulators[i]); -+ -+ return 0; -+} -+ -+static struct i2c_driver pfuze_driver = { -+ .id_table = pfuze_device_id, -+ .driver = { -+ .name = "pfuze100-regulator", -+ .owner = THIS_MODULE, -+ .of_match_table = pfuze_dt_ids, -+ }, -+ .probe = pfuze100_regulator_probe, -+ .remove = pfuze100_regulator_remove, -+}; -+module_i2c_driver(pfuze_driver); -+ -+MODULE_AUTHOR("Robin Gong "); -+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC"); -+MODULE_ALIAS("pfuze100-regulator"); ---- /dev/null -+++ b/include/linux/regulator/pfuze100.h -@@ -0,0 +1,44 @@ -+/* -+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -+ */ -+#ifndef __LINUX_REG_PFUZE100_H -+#define __LINUX_REG_PFUZE100_H -+ -+#define PFUZE100_SW1AB 0 -+#define PFUZE100_SW1C 1 -+#define PFUZE100_SW2 2 -+#define PFUZE100_SW3A 3 -+#define PFUZE100_SW3B 4 -+#define PFUZE100_SW4 5 -+#define PFUZE100_SWBST 6 -+#define PFUZE100_VSNVS 7 -+#define PFUZE100_VREFDDR 8 -+#define PFUZE100_VGEN1 9 -+#define PFUZE100_VGEN2 10 -+#define PFUZE100_VGEN3 11 -+#define PFUZE100_VGEN4 12 -+#define PFUZE100_VGEN5 13 -+#define PFUZE100_VGEN6 14 -+#define PFUZE100_MAX_REGULATOR 15 -+ -+struct regulator_init_data; -+ -+struct pfuze_regulator_platform_data { -+ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR]; -+}; -+ -+#endif /* __LINUX_REG_PFUZE100_H */ diff --git a/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch b/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch deleted file mode 100644 index 2a9fdff214..0000000000 --- a/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch +++ /dev/null @@ -1,44 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: REGULATOR_PFUZE100 needs to select - REGMAP_I2C - -This fixes below build errors: - - CC [M] drivers/regulator/pfuze100-regulator.o -drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type -drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer -drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default] -drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] -drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer -drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default] -drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] -drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer -drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default] -drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] -drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer -drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default] -drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] -drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe': -drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] -drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default] -cc1: some warnings being treated as errors -make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1 -make[1]: *** [drivers/regulator] Error 2 -make: *** [drivers] Error 2 - -Signed-off-by: Axel Lin -Signed-off-by: Mark Brown ---- - drivers/regulator/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/regulator/Kconfig -+++ b/drivers/regulator/Kconfig -@@ -303,6 +303,7 @@ config REGULATOR_PCF50633 - config REGULATOR_PFUZE100 - tristate "Support regulators on Freescale PFUZE100 PMIC" - depends on I2C -+ select REGMAP_I2C - help - Say y here to support the regulators found on the Freescale PFUZE100 - PMIC. diff --git a/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch b/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch deleted file mode 100644 index 488edb6332..0000000000 --- a/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Robin Gong -Subject: [PATCH] regulator:pfuze100: fix build warning and correct the binding - doc - -fix building warning and correct the binding doc - -Signed-off-by: Robin Gong -Signed-off-by: Mark Brown ---- - Documentation/devicetree/bindings/regulator/pfuze100.txt | 2 ++ - drivers/regulator/pfuze100-regulator.c | 2 +- - 2 files changed, 3 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/regulator/pfuze100.txt -+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt -@@ -3,6 +3,8 @@ PFUZE100 family of regulators - Required properties: - - compatible: "fsl,pfuze100" - - reg: I2C slave address -+ -+Required child node: - - regulators: This is the list of child nodes that specify the regulator - initialization data for defined regulators. Please refer to below doc - Documentation/devicetree/bindings/regulator/regulator.txt. ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -295,7 +295,7 @@ static inline struct device_node *match_ - #else - static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) - { -- return NULL; -+ return 0; - } - - static inline struct regulator_init_data *match_init_data(int index) diff --git a/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch b/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch deleted file mode 100644 index dfdefe7394..0000000000 --- a/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Robin Gong -Subject: [PATCH] regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driver - -Fix building error on x86_64 and i386: -WARNING: modpost: missing MODULE_LICENSE() in -drivers/regulator/pfuze100-regulator.o - -Signed-off-by: Robin Gong -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -451,4 +451,5 @@ module_i2c_driver(pfuze_driver); - - MODULE_AUTHOR("Robin Gong "); - MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC"); -+MODULE_LICENSE("GPL v2"); - MODULE_ALIAS("pfuze100-regulator"); diff --git a/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch b/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch deleted file mode 100644 index 609ed05b20..0000000000 --- a/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Use i2c_[set|get]_clientdata - -Since this is a i2c driver, use i2c_[set|get]_clientdata instead of -dev_[set|get]_drvdata. - -Signed-off-by: Axel Lin -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -360,7 +360,7 @@ static int pfuze100_regulator_probe(stru - if (!pfuze_chip) - return -ENOMEM; - -- dev_set_drvdata(&client->dev, pfuze_chip); -+ i2c_set_clientdata(client, pfuze_chip); - - memcpy(pfuze_chip->regulator_descs, pfuze100_regulators, - sizeof(pfuze_chip->regulator_descs)); -@@ -429,7 +429,7 @@ static int pfuze100_regulator_probe(stru - static int pfuze100_regulator_remove(struct i2c_client *client) - { - int i; -- struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev); -+ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client); - - for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) - regulator_unregister(pfuze_chip->regulators[i]); diff --git a/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch b/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch deleted file mode 100644 index 41ee1fee01..0000000000 --- a/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch +++ /dev/null @@ -1,19 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Fix module alias prefix - -i2c drivers use "i2c:" prefix for module alias. - -Signed-off-by: Axel Lin -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -452,4 +452,4 @@ module_i2c_driver(pfuze_driver); - MODULE_AUTHOR("Robin Gong "); - MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC"); - MODULE_LICENSE("GPL v2"); --MODULE_ALIAS("pfuze100-regulator"); -+MODULE_ALIAS("i2c:pfuze100-regulator"); diff --git a/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch b/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch deleted file mode 100644 index 0821991cce..0000000000 --- a/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Use regulator_map_voltage_ascend - -All table based voltage list have ascendant order. -Use regulator_map_voltage_ascend for them. - -Signed-off-by: Axel Lin -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -144,6 +144,7 @@ static struct regulator_ops pfuze100_sw_ - - static struct regulator_ops pfuze100_swb_regulator_ops = { - .list_voltage = regulator_list_voltage_table, -+ .map_voltage = regulator_map_voltage_ascend, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - diff --git a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch b/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch deleted file mode 100644 index 026eccec4d..0000000000 --- a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch +++ /dev/null @@ -1,67 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with - high bit set - -Current code adjust min_uV and uV_step but missed adjusting the n_voltages -setting. - -When BIT6 is clear: - n_voltages = (1975000 - 400000) / 25000 + 1 = 64 -When BIT6 is set: - n_voltages = (3300000 - 800000) / 50000 + 1 = 51 - -The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved. -When using regulator_list_voltage_linear, the n_voltages does matter here -because wrong n_voltages setting make the equation return wrong result. -e.g. if selector is 63, regulator_list_voltage_linear returns - 800000 + (50000 * 63) = 4000000 - It should return -EINVAL if the selector is in the range of 51 ~ 63. - -Signed-off-by: Axel Lin -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -388,8 +388,11 @@ static int pfuze100_regulator_probe(stru - - for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) { - struct regulator_init_data *init_data; -+ struct regulator_desc *desc; - int val; - -+ desc = &pfuze_chip->regulator_descs[i].desc; -+ - if (pdata) - init_data = pdata->init_data[i]; - else -@@ -397,13 +400,11 @@ static int pfuze100_regulator_probe(stru - - /* SW2~SW4 high bit check and modify the voltage value table */ - if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) { -- regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL + -- (i - PFUZE100_SW2) * 7, &val); -+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); - if (val & 0x40) { -- pfuze_chip->regulator_descs[i].desc.min_uV -- = 800000; -- pfuze_chip->regulator_descs[i].desc.uV_step -- = 50000; -+ desc->min_uV = 800000; -+ desc->uV_step = 50000; -+ desc->n_voltages = 51; - } - } - -@@ -412,8 +413,7 @@ static int pfuze100_regulator_probe(stru - config.driver_data = pfuze_chip; - config.of_node = match_of_node(i); - -- pfuze_chip->regulators[i] = regulator_register(&pfuze_chip -- ->regulator_descs[i].desc, &config); -+ pfuze_chip->regulators[i] = regulator_register(desc, &config); - if (IS_ERR(pfuze_chip->regulators[i])) { - dev_err(&client->dev, "register regulator%s failed\n", - pfuze100_regulators[i].desc.name); diff --git a/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch b/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch deleted file mode 100644 index 1089dffba2..0000000000 --- a/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay - implementation - -Simplify the equation to calculate ramp_delay. -Below equations are equivalent: - ramp_delay = 25000 / (2 * ramp_delay); - ramp_delay = 50000 / (4 * ramp_delay); - ramp_delay = 25000 / (2 * ramp_delay); - ramp_delay = 12500 / ramp_delay; -So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different -equations. - -Also use rdev->desc->vsel_reg instead of run-time calculate register address. - -Signed-off-by: Axel Lin -Reviewed-by: Robin Gong -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 21 +++++---------------- - 1 file changed, 5 insertions(+), 16 deletions(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struc - { - struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); - int id = rdev->desc->id; -- unsigned int val, ramp_bits, reg; -+ unsigned int ramp_bits; - int ret; - - if (id < PFUZE100_SWBST) { -- if (id == PFUZE100_SW1AB) -- reg = PFUZE100_SW1ABVOL; -- else -- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7; -- regmap_read(pfuze100->regmap, reg, &val); -- -- if (id <= PFUZE100_SW1C) -- ramp_delay = 25000 / (2 * ramp_delay); -- else if (val & 0x40) -- ramp_delay = 50000 / (4 * ramp_delay); -- else -- ramp_delay = 25000 / (2 * ramp_delay); -- -+ ramp_delay = 12500 / ramp_delay; - ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); -- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0, -- ramp_bits << 6); -+ ret = regmap_update_bits(pfuze100->regmap, -+ rdev->desc->vsel_reg + 4, -+ 0xc0, ramp_bits << 6); - if (ret < 0) - dev_err(pfuze100->dev, "ramp failed, err %d\n", ret); - } else diff --git a/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch b/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch deleted file mode 100644 index 34ff796e83..0000000000 --- a/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Axel Lin -Subject: [PATCH] regulator: pfuze100: Fix off-by-one for max_register setting - -max_register should be register count - 1. - -Signed-off-by: Axel Lin -Reviewed-by: Robin Gong -Signed-off-by: Mark Brown ---- - drivers/regulator/pfuze100-regulator.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -332,7 +332,7 @@ static int pfuze_identify(struct pfuze_c - static const struct regmap_config pfuze_regmap_config = { - .reg_bits = 8, - .val_bits = 8, -- .max_register = PFUZE_NUMREGS, -+ .max_register = PFUZE_NUMREGS - 1, - .cache_type = REGCACHE_RBTREE, - }; - diff --git a/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch b/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch deleted file mode 100644 index 8c0a92bb7a..0000000000 --- a/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Tim Harvey -Subject: [PATCH] regulator: pfuze100: allow misprogrammed ID - -prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of -PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 - -Signed-off-by: Tim Harvey ---- - drivers/regulator/pfuze100-regulator.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_c - if (ret) - return ret; - -- if (value & 0x0f) { -- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); -- return -ENODEV; -+ switch (value & 0x0f) { -+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */ -+ case 0x8: -+ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); -+ case 0x0: -+ break; -+ default: -+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); -+ return -ENODEV; - } - - ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); diff --git a/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch b/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch deleted file mode 100644 index 1d3e83952b..0000000000 --- a/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch +++ /dev/null @@ -1,58 +0,0 @@ -From: Pratyush Anand - -pp->io_base which is the input of the outbound IO address translation -unit should be the cpu address, it was programmed wrongly to realio -address. - -We should pass global_io_offset rather than sys->io_offset to -pci_ioremap_io, so we map the new window into the first available spot -in the Linux view of the I/O space. - -We must also pass cpu address instead of realio address to -pci_ioremap_io. - -This patch fixes above issue. It has been tested with Lecroy PTC in AIC -mode and Pericom PI7C9X2G303EL PCIe switch, which does not work -otherwise. - -Signed-off-by: Pratyush Anand -Tested-by: Mohit Kumar -Tested-by: Tim Harvey -Cc: Arnd Bergmann -Cc: Marek Vasut -Cc: Richard Zhu -Cc: linux-pci@vger.kernel.org -Cc: spear-devel@list.st.com ---- - drivers/pci/host/pcie-designware.c | 5 ++--- - 1 files changed, 2 insertions(+), 3 deletions(-) - -http://thread.gmane.org/gmane.linux.kernel.pci/27204 - ---- a/drivers/pci/host/pcie-designware.c -+++ b/drivers/pci/host/pcie-designware.c -@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie - + global_io_offset); - pp->config.io_size = resource_size(&pp->io); - pp->config.io_bus_addr = range.pci_addr; -+ pp->io_base = range.cpu_addr; - } - if (restype == IORESOURCE_MEM) { - of_pci_range_to_resource(&range, np, &pp->mem); -@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie - - pp->cfg0_base = pp->cfg.start; - pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size; -- pp->io_base = pp->io.start; - pp->mem_base = pp->mem.start; - - pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base, -@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys - - if (global_io_offset < SZ_1M && pp->config.io_size > 0) { - sys->io_offset = global_io_offset - pp->config.io_bus_addr; -- pci_ioremap_io(sys->io_offset, pp->io.start); -+ pci_ioremap_io(global_io_offset, pp->io_base); - global_io_offset += SZ_64K; - pci_add_resource_offset(&sys->resources, &pp->io, - sys->io_offset); diff --git a/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch b/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch deleted file mode 100644 index 0546d9c8fa..0000000000 --- a/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 8c8c877d8490c9d51210ee9e90d5f4d740f115c9 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Thu, 17 Oct 2013 15:55:47 -0700 -Subject: [PATCH 3/5] PCI: imx6: init must be early - -If driver init is not early the pcie port driver gets initalized -first and interrupts are not configured for the imx6 pcie driver. - -Signed-off-by: Tim Harvey ---- - drivers/pci/host/pci-imx6.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/pci/host/pci-imx6.c -+++ b/drivers/pci/host/pci-imx6.c -@@ -568,7 +568,7 @@ static int __init imx6_pcie_init(void) - { - return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe); - } --module_init(imx6_pcie_init); -+fs_initcall(imx6_pcie_init); - - MODULE_AUTHOR("Sean Cross "); - MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver"); diff --git a/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch b/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch deleted file mode 100644 index 5cef4114f4..0000000000 --- a/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Thu, 17 Oct 2013 15:52:16 -0700 -Subject: [PATCH] PCI: imx6: fix imprecise abort handler - -An imprecise abort is triggered when a port behind a switch is accessed -and no device is present. At enumeration, imprecise aborts are not enabled -thus this ends up getting deferred until the kernel has completed init. At -that point we must not adjust PC - the handler must do nothing, but a handler -must exist. - -This fixes random crashes that occur right after freeing init. -This is against linux-pci/host-imx6. - -Acked-by: Marek Vasut -Tested-by: Marek Vasut -Signed-off-by: Tim Harvey ---- - drivers/pci/host/pci-imx6.c | 6 ------ - 1 file changed, 6 deletions(-) - ---- a/drivers/pci/host/pci-imx6.c -+++ b/drivers/pci/host/pci-imx6.c -@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem * - static int imx6q_pcie_abort_handler(unsigned long addr, - unsigned int fsr, struct pt_regs *regs) - { -- /* -- * If it was an imprecise abort, then we need to correct the -- * return address to be _after_ the instruction. -- */ -- if (fsr & (1 << 10)) -- regs->ARM_pc += 4; - return 0; - } - diff --git a/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch b/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch deleted file mode 100644 index a94a166908..0000000000 --- a/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 11e8d0ed8cc3b415767961555efc2885791a9391 Mon Sep 17 00:00:00 2001 -From: Tim Harvey -Date: Thu, 17 Oct 2013 15:57:28 -0700 -Subject: [PATCH 4/5] PCI: imx6: increase link startup - -An increase link startup delay is required when certain PCI switches are -attached to the root complex. - -Signed-off-by: Tim Harvey ---- - drivers/pci/host/pci-imx6.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/pci/host/pci-imx6.c -+++ b/drivers/pci/host/pci-imx6.c -@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct p - while (!dw_pcie_link_up(pp)) { - usleep_range(100, 1000); - count++; -- if (count >= 10) { -+ if (count >= 200) { - dev_err(pp->dev, "phy link never came up\n"); - dev_dbg(pp->dev, - "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", diff --git a/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch deleted file mode 100644 index 03f29f480d..0000000000 --- a/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Tim Harvey -Subject: [PATCH] PCI: imx6: add support for legacy irqs - -The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices -are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the -mapping is reversed from when they are behind a PCIe switch. - -This patch still needs some review and clarification before going -upstream. ---- - drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++- - 1 file changed, 20 insertions(+), 1 deletion(-) - ---- a/drivers/pci/host/pcie-designware.c -+++ b/drivers/pci/host/pcie-designware.c -@@ -482,7 +482,26 @@ int dw_pcie_map_irq(const struct pci_dev - { - struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); - -- return pp->irq; -+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */ -+ if ( dev->bus && dev->bus->self -+ && (dev->bus->self->vendor == 0x104c) -+ && (dev->bus->self->device == 0x8240)) { -+ switch (pin) { -+ case 1: return pp->irq - 3; -+ case 2: return pp->irq - 2; -+ case 3: return pp->irq - 1; -+ case 4: return pp->irq; -+ default: return -1; -+ } -+ } else { -+ switch (pin) { -+ case 1: return pp->irq; -+ case 2: return pp->irq - 1; -+ case 3: return pp->irq - 2; -+ case 4: return pp->irq - 3; -+ default: return -1; -+ } -+ } - } - - static struct hw_pci dw_pci = { diff --git a/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch deleted file mode 100644 index 54743a5d99..0000000000 --- a/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Tim Harvey -Subject: [PATCH] sky2: allow mac to come from dt - -The driver reads the mac address from the device registers which would -need to have been programmed by the bootloader. This patch adds -the ability to pull the mac from devicetree via the aliases/sky2 node. - -Signed-off-by: Tim Harvey ---- - drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++- - 1 file changed, 32 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/marvell/sky2.c -+++ b/drivers/net/ethernet/marvell/sky2.c -@@ -44,6 +44,8 @@ - #include - #include - #include -+#include -+#include - - #include - -@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd - { - struct sky2_port *sky2; - struct net_device *dev = alloc_etherdev(sizeof(*sky2)); -+ unsigned char *iap, tmpaddr[ETH_ALEN]; - - if (!dev) - return NULL; -@@ -4802,8 +4805,36 @@ static struct net_device *sky2_init_netd - - dev->features |= dev->hw_features; - -+ /* -+ * try to get mac address in the following order: -+ * 1) from device tree data -+ * 2) from internal registers set by bootloader -+ */ -+ iap = NULL; -+ if (IS_ENABLED(CONFIG_OF)) { -+ struct device_node *np; -+ np = of_find_node_by_path("/aliases"); -+ if (np) { -+ const char *path = of_get_property(np, "sky2", NULL); -+ if (path) -+ np = of_find_node_by_path(path); -+ if (np) -+ path = of_get_mac_address(np); -+ if (path) -+ iap = (unsigned char *) path; -+ } -+ } -+ -+ /* -+ * 2) mac registers set by bootloader -+ */ -+ if (!iap || !is_valid_ether_addr(iap)) { -+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); -+ iap = &tmpaddr[0]; -+ } -+ - /* read the mac address */ -- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); -+ memcpy(dev->dev_addr, iap, ETH_ALEN); - - return dev; - } diff --git a/target/linux/imx6/patches-3.10/0060-flexcan.patch b/target/linux/imx6/patches-3.10/0060-flexcan.patch deleted file mode 100644 index 11a66c538a..0000000000 --- a/target/linux/imx6/patches-3.10/0060-flexcan.patch +++ /dev/null @@ -1,92 +0,0 @@ ---- a/arch/arm/boot/dts/imx6q.dtsi -+++ b/arch/arm/boot/dts/imx6q.dtsi -@@ -163,6 +163,31 @@ - }; - }; - -+ flexcan1 { -+ pinctrl_flexcan1_1: flexcan1grp-1 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 -+ MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 -+ >; -+ }; -+ -+ pinctrl_flexcan1_2: flexcan1grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 -+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 -+ >; -+ }; -+ }; -+ -+ flexcan2 { -+ pinctrl_flexcan2_1: flexcan2grp-1 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 -+ MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 -+ >; -+ }; -+ }; -+ - gpmi-nand { - pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = < ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -292,13 +292,21 @@ - }; - - can1: flexcan@02090000 { -+ compatible = "fsl,imx6q-flexcan"; - reg = <0x02090000 0x4000>; - interrupts = <0 110 0x04>; -+ clocks = <&clks 108>, <&clks 109>; -+ clock-names = "ipg", "per"; -+ status = "disabled"; - }; - - can2: flexcan@02094000 { -+ compatible = "fsl,imx6q-flexcan"; - reg = <0x02094000 0x4000>; - interrupts = <0 111 0x04>; -+ clocks = <&clks 110>, <&clks 111>; -+ clock-names = "ipg", "per"; -+ status = "disabled"; - }; - - gpt: gpt@02098000 { ---- a/arch/arm/boot/dts/imx6dl.dtsi -+++ b/arch/arm/boot/dts/imx6dl.dtsi -@@ -80,6 +80,31 @@ - }; - }; - -+ flexcan1 { -+ pinctrl_flexcan1_1: flexcan1grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 -+ MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 -+ >; -+ }; -+ -+ pinctrl_flexcan1_2: flexcan1grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 -+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 -+ >; -+ }; -+ }; -+ -+ flexcan2 { -+ pinctrl_flexcan2_1: flexcan2grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 -+ MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 -+ >; -+ }; -+ }; -+ - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < diff --git a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch b/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch deleted file mode 100644 index fd90130826..0000000000 --- a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001 -From: Marc Kleine-Budde -Date: Mon, 25 Nov 2013 22:15:20 +0100 -Subject: [PATCH] can: flexcan: use correct clock as base for bit rate - calculation - -The flexcan IP core uses the peripheral clock ("per") as basic clock for the -bit timing calculation. However the driver uses the the wrong clock ("ipg"). -This leads to wrong bit rates if the rates on both clock are different. - -This patch fixes the problem by using the correct clock for the bit rate -calculation. - -Cc: linux-stable -Signed-off-by: Marc Kleine-Budde ---- - drivers/net/can/flexcan.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/can/flexcan.c -+++ b/drivers/net/can/flexcan.c -@@ -1021,7 +1021,6 @@ static int flexcan_probe(struct platform - err = PTR_ERR(clk_ipg); - goto failed_clock; - } -- clock_freq = clk_get_rate(clk_ipg); - - clk_per = devm_clk_get(&pdev->dev, "per"); - if (IS_ERR(clk_per)) { -@@ -1029,6 +1028,7 @@ static int flexcan_probe(struct platform - err = PTR_ERR(clk_per); - goto failed_clock; - } -+ clock_freq = clk_get_rate(clk_per); - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch b/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch deleted file mode 100644 index cb26ec83d4..0000000000 --- a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -119,7 +119,7 @@ - 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ - num-lanes = <1>; - interrupts = <0 123 0x04>; -- clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; -+ clocks = <&clks 189>, <&clks 187>, <&clks 198>, <&clks 144>; - clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; - status = "disabled"; - }; ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -125,3 +125,5 @@ config PCI_IOAPIC - config PCI_LABEL - def_bool y if (DMI || ACPI) - select NLS -+ -+source "drivers/pci/host/Kconfig" ---- a/drivers/pci/Makefile -+++ b/drivers/pci/Makefile -@@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen - obj-$(CONFIG_OF) += of.o - - ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG -+ -+# PCI host controller drivers -+obj-y += host/ ---- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt -+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt -@@ -208,10 +208,10 @@ clocks and IDs. - pll4_post_div 193 - pll5_post_div 194 - pll5_video_div 195 -- lvds1_sel 204 -- lvds2_sel 205 -- lvds1_gate 206 -- lvds2_gate 207 -+ lvds1_sel 196 -+ lvds2_sel 197 -+ lvds1_gate 198 -+ lvds2_gate 199 - - Examples: - diff --git a/target/linux/imx6/patches-3.10/100-bootargs.patch b/target/linux/imx6/patches-3.10/100-bootargs.patch deleted file mode 100644 index c10f64b38d..0000000000 --- a/target/linux/imx6/patches-3.10/100-bootargs.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/boot/dts/imx6dl-wandboard.dts -+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts -@@ -18,6 +18,10 @@ - memory { - reg = <0x10000000 0x40000000>; - }; -+ -+ chosen { -+ bootargs = "console=ttymxc0,115200"; -+ }; - }; - - &fec { diff --git a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch deleted file mode 100644 index 1385661b04..0000000000 --- a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch +++ /dev/null @@ -1,263 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6dl-sabresd.dtb \ - imx6dl-wandboard.dtb \ - imx6q-arm2.dtb \ -+ imx6q-gw51xx.dtb \ -+ imx6q-gw52xx.dtb \ -+ imx6q-gw53xx.dtb \ -+ imx6q-gw54xx.dtb \ -+ imx6q-gw5400-a.dtb \ -+ imx6dl-gw51xx.dtb \ -+ imx6dl-gw52xx.dtb \ -+ imx6dl-gw53xx.dtb \ -+ imx6dl-gw54xx.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ ---- a/arch/arm/boot/dts/imx6q.dtsi -+++ b/arch/arm/boot/dts/imx6q.dtsi -@@ -212,6 +212,30 @@ - MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; -+ -+ /* No strobe */ -+ pinctrl_gpmi_nand_2: gpmi-nand-2 { -+ fsl,pins = < -+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 -+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; - }; - - i2c1 { -@@ -230,6 +254,12 @@ - MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; -+ pinctrl_i2c2_2: i2c2grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; - }; - - i2c3 { -@@ -239,6 +269,12 @@ - MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -+ pinctrl_i2c3_2: i2c3grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; - }; - - uart1 { -@@ -248,6 +284,12 @@ - MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart1_2: uart1grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart2 { -@@ -257,6 +299,21 @@ - MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart2_3: uart2grp-3 { -+ fsl,pins = < -+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart3 { -+ pinctrl_uart3_3: uart3grp-3 { -+ fsl,pins = < -+ MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart4 { -@@ -267,6 +324,15 @@ - >; - }; - }; -+ -+ uart5 { -+ pinctrl_uart5_1: uart5grp-1 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; - - usbotg { - pinctrl_usbotg_1: usbotggrp-1 { ---- a/arch/arm/boot/dts/imx6dl.dtsi -+++ b/arch/arm/boot/dts/imx6dl.dtsi -@@ -37,6 +37,18 @@ - compatible = "fsl,imx6dl-iomuxc"; - reg = <0x020e0000 0x4000>; - -+ /* shared pinctrl settings */ -+ audmux { -+ pinctrl_audmux_1: audmux-1 { -+ fsl,pins = < -+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000 -+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 -+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000 -+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000 -+ >; -+ }; -+ }; -+ - enet { - pinctrl_enet_1: enetgrp-1 { - fsl,pins = < -@@ -105,6 +117,59 @@ - }; - }; - -+ gpmi-nand { -+ /* No strobe */ -+ pinctrl_gpmi_nand_2: gpmi-nand-2 { -+ fsl,pins = < -+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 -+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ }; -+ -+ i2c1 { -+ pinctrl_i2c1_1: i2c1grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ -+ i2c2 { -+ pinctrl_i2c2_2: i2c2grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ -+ i2c3 { -+ pinctrl_i2c3_2: i2c3grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < -@@ -112,6 +177,30 @@ - MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart1_2: uart1grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart2 { -+ pinctrl_uart2_3: uart2grp-3 { -+ fsl,pins = < -+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart3 { -+ pinctrl_uart3_3: uart3grp-3 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart4 { -@@ -123,7 +212,22 @@ - }; - }; - -+ uart5 { -+ pinctrl_uart5_1: uart5grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ - usbotg { -+ pinctrl_usbotg_1: usbotggrp-1 { -+ fsl,pins = < -+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ >; -+ }; -+ - pinctrl_usbotg_2: usbotggrp-2 { - fsl,pins = < - MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 diff --git a/target/linux/imx6/patches-3.10/120-ventana-init.ptach b/target/linux/imx6/patches-3.10/120-ventana-init.ptach deleted file mode 100644 index 2dd91d2e9a..0000000000 --- a/target/linux/imx6/patches-3.10/120-ventana-init.ptach +++ /dev/null @@ -1,70 +0,0 @@ -Many of the Gateworks Ventana boards use a PLX PEX860X PCIe Switch -and utilize its GPIO outputs as PERST# for downstream ports. This -patch configures them appropriately during enumeration. - -Additionally many of the Ventana boards use CKO1 as the clock input for -an analog audio codec which is setup here. - ---- a/arch/arm/mach-imx/mach-imx6q.c -+++ b/arch/arm/mach-imx/mach-imx6q.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -145,6 +146,42 @@ static void __init imx6q_sabrelite_init( - imx6q_sabrelite_cko1_setup(); - } - -+/* -+ * fixup for PEX 8909 bridge to configure GPIO1-7 as output High -+ * as they are used for slots1-7 PERST# -+ */ -+static void mx6_ventana_pciesw_early_fixup(struct pci_dev *dev) -+{ -+ u32 dw; -+ -+ if (!of_machine_is_compatible("gw,ventana")) -+ return; -+ -+ if (dev->devfn != 0) -+ return; -+ -+ pci_read_config_dword(dev, 0x62c, &dw); -+ dw |= 0xaaa8; // GPIO1-7 outputs -+ pci_write_config_dword(dev, 0x62c, dw); -+ -+ pci_read_config_dword(dev, 0x644, &dw); -+ dw |= 0xfe; // GPIO1-7 output high -+ pci_write_config_dword(dev, 0x644, dw); -+ -+ mdelay(100); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, -+ mx6_ventana_pciesw_early_fixup); -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, -+ mx6_ventana_pciesw_early_fixup); -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, -+ mx6_ventana_pciesw_early_fixup); -+ -+static void __init imx6q_ventana_init(void) -+{ -+ imx6q_sabrelite_cko1_setup(); -+} -+ - static void __init imx6q_1588_init(void) - { - struct regmap *gpr; -@@ -163,6 +200,9 @@ static void __init imx6q_usb_init(void) - - static void __init imx6q_init_machine(void) - { -+ if (of_machine_is_compatible("gw,ventana")) -+ imx6q_ventana_init(); -+ - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) - imx6q_sabrelite_init(); - -- 2.30.2