From f5aa4590433638e6b2c191412fa802ae5a64cdc9 Mon Sep 17 00:00:00 2001 From: Henryk Heisig Date: Thu, 6 Oct 2016 23:46:38 +0200 Subject: [PATCH] ar71xx: Add support to TP-Link EAP120 Signed-off-by: Henryk Heisig --- .../ar71xx/base-files/etc/board.d/02_network | 1 + target/linux/ar71xx/base-files/etc/diag.sh | 3 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 7 + .../ar71xx/base-files/lib/upgrade/platform.sh | 3 +- target/linux/ar71xx/config-4.4 | 3 + .../files/arch/mips/ath79/Kconfig.openwrt | 9 ++ .../ar71xx/files/arch/mips/ath79/Makefile | 1 + .../files/arch/mips/ath79/mach-eap120.c | 126 ++++++++++++++++++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/tp-link.mk | 15 +++ tools/firmware-utils/src/tplink-safeloader.c | 101 ++++++++++++++ 11 files changed, 269 insertions(+), 1 deletion(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index f720767fbb..b7b91d0ad8 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -66,6 +66,7 @@ ar71xx_setup_interfaces() bullet-m|\ c-55|\ cap4200ag|\ + eap120|\ eap300v2|\ eap7660d|\ el-mini|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 0d069ec88c..7a40f44e4a 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -130,6 +130,9 @@ get_status_led() { oolite) status_led="$board:red:system" ;; + eap120) + status_led="$(ar71xx_board_name):green:system" + ;; eap300v2) status_led="engenius:blue:power" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 940c1c95de..1492b50774 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -361,6 +361,9 @@ tplink_pharos_board_detect() { 'CPE520(TP-LINK|UN|N300-5)') model='TP-Link CPE520' ;; + 'EAP120(TP-LINK|UN|N300-2)') + model='TP-Link EAP120' + ;; esac [ -n "$model" ] && AR71XX_MODEL="$model v$2" @@ -563,6 +566,10 @@ ar71xx_board_detect() { *"Domino Pi") name="gl-domino" ;; + *"EAP120") + name="eap120" + tplink_pharos_board_detect + ;; *"EAP300 v2") name="eap300v2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 7c554e3f29..35e9bb4391 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -433,7 +433,8 @@ platform_check_image() { return $? ;; cpe210|\ - cpe510) + cpe510|\ + eap120) tplink_pharos_check_image "$1" && return 0 return 1 ;; diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index fb59b077ce..77a594999d 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -80,6 +80,7 @@ CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y CONFIG_ATH79_MACH_DR344=y CONFIG_ATH79_MACH_DR531=y CONFIG_ATH79_MACH_DRAGINO2=y +CONFIG_ATH79_MACH_EAP120=y CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_EL_M150=y @@ -315,7 +316,9 @@ CONFIG_LEDS_NU801=y # CONFIG_LEDS_WNDR3700_USB is not set CONFIG_LIBFDT=y CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BITBANG=y CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_GPIO=y CONFIG_MICREL_PHY=y CONFIG_MIPS=y CONFIG_MIPS_CLOCK_VSYSCALL=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 3084155673..7c171ee2ac 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -666,6 +666,15 @@ config ATH79_MACH_GL_INET select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_EAP120 + bool "TP-LINK EAP120 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_EAP300V2 bool "EnGenius EAP300 v2 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index ed5c4d8faf..c528c03e35 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o +obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c new file mode 100644 index 0000000000..130c7706a6 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c @@ -0,0 +1,126 @@ +/* + * TP-LINK EAP120 board support + * + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + + +#define EAP120_GPIO_LED_RED 12 +#define EAP120_GPIO_LED_YEL 13 +#define EAP120_GPIO_LED_GRN 15 +#define EAP120_GPIO_BTN_RESET 4 + +#define EAP120_KEYS_POLL_INTERVAL 20 /* msecs */ +#define EAP120_KEYS_DEBOUNCE_INTERVAL (3 * EAP120_KEYS_POLL_INTERVAL) + +#define EAP120_GPIO_SMI_MDIO 16 +#define EAP120_GPIO_SMI_MDC 17 + +#define EAP120_LAN_PHYADDR 4 + +static struct gpio_led eap120_leds_gpio[] __initdata = { + { + .name = "eap120:red:system", + .gpio = EAP120_GPIO_LED_RED, + .active_low = 1, + }, { + .name = "eap120:yellow:system", + .gpio = EAP120_GPIO_LED_YEL, + .active_low = 1, + }, { + .name = "eap120:green:system", + .gpio = EAP120_GPIO_LED_GRN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button eap120_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EAP120_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP120_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct mdio_gpio_platform_data eap120_mdio = { + .mdc = EAP120_GPIO_SMI_MDC, + .mdio = EAP120_GPIO_SMI_MDIO, + .phy_mask = ~BIT(EAP120_LAN_PHYADDR), +}; + +static struct at803x_platform_data eap120_ar8035_data = { + .disable_smarteee = 0, + .enable_rgmii_rx_delay = 1, + .enable_rgmii_tx_delay = 0, + .fixup_rgmii_tx_delay = 1, +}; + +static struct platform_device eap120_phy_device = { + .name = "mdio-gpio", + .id = 0, + .dev = { + .platform_data = &eap120_mdio, &eap120_ar8035_data + }, +}; + +static void __init eap_setup(u8 *mac) +{ + ath79_register_leds_gpio(-1, ARRAY_SIZE(eap120_leds_gpio), + eap120_leds_gpio); + + ath79_register_gpio_keys_polled(1, EAP120_KEYS_POLL_INTERVAL, + ARRAY_SIZE(eap120_gpio_keys), + eap120_gpio_keys); + + ath79_register_m25p80(NULL); + + /* MDIO Interface */ + platform_device_register(&eap120_phy_device); + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */ + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_eth0_data.mii_bus_dev = &eap120_phy_device.dev; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(EAP120_LAN_PHYADDR); + ath79_eth0_pll_data.pll_1000 = 0x0e000000; + ath79_eth0_pll_data.pll_100 = 0x00000101; + ath79_eth0_pll_data.pll_10 = 0x00001313; + ath79_register_eth(0); +} + +static void __init eap120_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f030008); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + eap_setup(mac); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_EAP120, "EAP120", "TP-LINK EAP120", + eap120_setup); + diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 8835b97bd0..aa8215bbeb 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -75,6 +75,7 @@ enum ath79_mach_type { ATH79_MACH_DR344, /* Wallys DR344 */ ATH79_MACH_DR531, /* Wallys DR531 */ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ + ATH79_MACH_EAP120, /* TP-LINK EAP120 */ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index c4cd25ffb8..3559555985 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -109,6 +109,21 @@ $(Device/cpe510-520) endef TARGET_DEVICES += cpe210-220 cpe510-520 +define Device/eap120 + DEVICE_TITLE := TP-LINK EAP120 + MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),14336k(rootfs),192k(config)ro,64k(ART)ro,15872k@0x40000(firmware) + IMAGE_SIZE := 15872k + BOARDNAME := EAP120 + TPLINK_BOARD_NAME := EAP120 + DEVICE_PROFILE := EAP120 + LOADER_TYPE := elf + KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory +endef +TARGET_DEVICES += eap120 + define Device/tl-wdr4300-v1 $(Device/tplink-8mlzma) DEVICE_TITLE := TP-LINK TL-WDR4300 v1 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 4938f74eec..fdf93d75d5 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -108,6 +108,9 @@ static const char cpe510_vendor[] = "CPE510(TP-LINK|UN|N300-5):1.0\r\n"; /** Vendor information for C2600 */ static const char c2600_vendor[] = ""; +/** Vendor information for EAP120 */ +static const char eap120_vendor[] = "EAP120(TP-LINK|UN|N300-2):1.0\r\n"; + /** The flash partition table for CPE210/220/510/520; it is the same as the one used by the stock images. @@ -162,6 +165,25 @@ static const struct flash_partition_entry c2600_partitions[] = { {NULL, 0, 0} }; +/** The flash partition table for EAP120; + it is the same as the one used by the stock images. +*/ +static const struct flash_partition_entry eap120_partitions[] = { + {"fs-uboot", 0x00000, 0x20000}, + {"partition-table", 0x20000, 0x02000}, + {"default-mac", 0x30000, 0x00020}, + {"support-list", 0x31000, 0x00100}, + {"product-info", 0x31100, 0x00100}, + {"soft-version", 0x32000, 0x00100}, + {"os-image", 0x40000, 0x180000}, + {"file-system", 0x1c0000, 0x600000}, + {"user-config", 0x7c0000, 0x10000}, + {"backup-config", 0x7d0000, 0x10000}, + {"log", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} +}; + /** The support list for CPE210/220 */ @@ -188,6 +210,13 @@ static const char c2600_support_list[] = "SupportList:\r\n" "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n"; +/** + The support list for EAP120 +*/ +static const char eap120_support_list[] = + "SupportList:\r\n" + "EAP120(TP-LINK|UN|N300-2):1.0\r\n"; + #define error(_ret, _errno, _str, ...) \ do { \ fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \ @@ -514,6 +543,37 @@ static void * generate_sysupgrade_image_c2600(const struct flash_partition_entry return image; } +static void *generate_sysupgrade_image_eap120(const struct flash_partition_entry *flash_parts, const struct image_partition_entry *image_parts, size_t *len) +{ + const struct flash_partition_entry *flash_os_image = &flash_parts[6]; + const struct flash_partition_entry *flash_file_system = &flash_parts[7]; + + const struct image_partition_entry *image_os_image = &image_parts[3]; + const struct image_partition_entry *image_file_system = &image_parts[4]; + + assert(strcmp(flash_os_image->name, "os-image") == 0); + assert(strcmp(flash_file_system->name, "file-system") == 0); + + assert(strcmp(image_os_image->name, "os-image") == 0); + assert(strcmp(image_file_system->name, "file-system") == 0); + + if (image_os_image->size > flash_os_image->size) + error(1, 0, "kernel image too big (more than %u bytes)", (unsigned)flash_os_image->size); + if (image_file_system->size > flash_file_system->size) + error(1, 0, "rootfs image too big (more than %u bytes)", (unsigned)flash_file_system->size); + + *len = flash_file_system->base - flash_os_image->base + image_file_system->size; + + uint8_t *image = malloc(*len); + if (!image) + error(1, errno, "malloc"); + + memset(image, 0xff, *len); + memcpy(image, image_os_image->data, image_os_image->size); + memcpy(image + flash_file_system->base - flash_os_image->base, image_file_system->data, image_file_system->size); + + return image; +} /** Generates an image for CPE210/220/510/520 and writes it to a file */ static void do_cpe(const char *output, @@ -588,6 +648,45 @@ static void do_c2600(const char *output, const char *kernel_image, const char *r } +/** Generates an image for EAP120 and writes it to a file */ +static void do_eap(const char *output, + const char *kernel_image, + const char *rootfs_image, + uint32_t rev, + bool add_jffs2_eof, + bool sysupgrade, + const char *support_list) { + struct image_partition_entry parts[6] = {}; + + parts[0] = make_partition_table(eap120_partitions); + parts[1] = make_soft_version(rev); + parts[2] = make_support_list(support_list, false); + parts[3] = read_file("os-image", kernel_image, false); + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof); + + size_t len; + void *image; + if (sysupgrade) + image = generate_sysupgrade_image_eap120(eap120_partitions, parts, &len); + else + image = generate_factory_image(eap120_vendor, parts, &len); + + FILE *file = fopen(output, "wb"); + if (!file) + error(1, errno, "unable to open output file"); + + if (fwrite(image, len, 1, file) != 1) + error(1, 0, "unable to write output file"); + + fclose(file); + + free(image); + + size_t i; + for (i = 0; parts[i].name; i++) + free_image_partition(parts[i]); +} + /** Usage output */ static void usage(const char *argv0) { fprintf(stderr, @@ -673,6 +772,8 @@ int main(int argc, char *argv[]) { do_cpe(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade, cpe510_support_list); else if (strcmp(board, "C2600") == 0) do_c2600(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade); + else if (strcmp(board, "EAP120") == 0) + do_eap(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade, eap120_support_list); else error(1, 0, "unsupported board %s", board); -- 2.30.2