target/linux/ath25/base-files/etc/uci-defaults/02_network

   1 #!/bin/sh
   2 if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
   3      -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
   4    [ -x /sbin/swconfig ];
   5 then
   6         uci batch <<EOF
   7 set network.eth0=switch
   8 set network.eth0.name=eth0
   9 set network.eth0.reset=1
  10 set network.eth0.enable_vlan=1
  11 set network.eth0_1=switch_vlan
  12 set network.eth0_1.device=eth0
  13 set network.eth0_1.vlan=1
  14 set network.eth0_1.ports="0 1 2 3 5t"
  15 set network.eth0_2=switch_vlan
  16 set network.eth0_2.device=eth0
  17 set network.eth0_2.vlan=2
  18 set network.eth0_2.ports="4 5t"
  19 EOF
  20         HAS_SWITCH=1
  21 fi
  22
  23 if [ -n "$HAS_SWITCH" -o \
  24         -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
  25         -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
  26         uci batch <<EOF
  27 set network.lan.ifname=eth0.1
  28 set network.wan=interface
  29 set network.wan.ifname=eth0.2
  30 set network.wan.proto=dhcp
  31 commit network
  32 EOF
  33         HAS_SWITCH=1
  34 fi
  35
  36 [ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
  37         uci batch <<EOF
  38 set network.wan=interface
  39 set network.wan.ifname=eth1
  40 set network.wan.proto=dhcp
  41 commit network
  42 EOF
  43 }
  44
  45 uci commit network