5206509c42a57abe057968e6d6b2b2ff57d2926b
[openwrt/staging/yousong.git] / target / linux / generic / files / drivers / net / phy / rtl8306.c
1 /*
2 * rtl8306.c: RTL8306S switch driver
3 *
4 * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16 #include <linux/if.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/list.h>
20 #include <linux/if_ether.h>
21 #include <linux/skbuff.h>
22 #include <linux/netdevice.h>
23 #include <linux/netlink.h>
24 #include <net/genetlink.h>
25 #include <linux/switch.h>
26 #include <linux/delay.h>
27 #include <linux/phy.h>
28
29 //#define DEBUG 1
30
31 /* Global (PHY0) */
32 #define RTL8306_REG_PAGE 16
33 #define RTL8306_REG_PAGE_LO (1 << 15)
34 #define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */
35
36 #define RTL8306_NUM_VLANS 16
37 #define RTL8306_NUM_PORTS 6
38 #define RTL8306_PORT_CPU 5
39 #define RTL8306_NUM_PAGES 4
40 #define RTL8306_NUM_REGS 32
41
42 #define RTL_NAME_S "RTL8306S"
43 #define RTL_NAME_SD "RTL8306SD"
44 #define RTL_NAME_SDM "RTL8306SDM"
45 #define RTL_NAME_UNKNOWN "RTL8306(unknown)"
46
47 #define RTL8306_MAGIC 0x8306
48
49 static LIST_HEAD(phydevs);
50
51 struct rtl_priv {
52 struct list_head list;
53 struct switch_dev dev;
54 int page;
55 int type;
56 int do_cpu;
57 struct mii_bus *bus;
58 char hwname[sizeof(RTL_NAME_UNKNOWN)];
59 bool fixup;
60 };
61
62 struct rtl_phyregs {
63 int nway;
64 int speed;
65 int duplex;
66 };
67
68 #define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
69
70 enum {
71 RTL_TYPE_S,
72 RTL_TYPE_SD,
73 RTL_TYPE_SDM,
74 };
75
76 struct rtl_reg {
77 int page;
78 int phy;
79 int reg;
80 int bits;
81 int shift;
82 int inverted;
83 };
84
85 #define RTL_VLAN_REGOFS(name) \
86 (RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
87
88 #define RTL_PORT_REGOFS(name) \
89 (RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
90
91 #define RTL_PORT_REG(id, reg) \
92 (RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
93
94 #define RTL_VLAN_REG(id, reg) \
95 (RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
96
97 #define RTL_GLOBAL_REGATTR(reg) \
98 .id = RTL_REG_##reg, \
99 .type = SWITCH_TYPE_INT, \
100 .ofs = 0, \
101 .set = rtl_attr_set_int, \
102 .get = rtl_attr_get_int
103
104 #define RTL_PORT_REGATTR(reg) \
105 .id = RTL_REG_PORT0_##reg, \
106 .type = SWITCH_TYPE_INT, \
107 .ofs = RTL_PORT_REGOFS(reg), \
108 .set = rtl_attr_set_port_int, \
109 .get = rtl_attr_get_port_int
110
111 #define RTL_VLAN_REGATTR(reg) \
112 .id = RTL_REG_VLAN0_##reg, \
113 .type = SWITCH_TYPE_INT, \
114 .ofs = RTL_VLAN_REGOFS(reg), \
115 .set = rtl_attr_set_vlan_int, \
116 .get = rtl_attr_get_vlan_int
117
118 enum rtl_regidx {
119 RTL_REG_CHIPID,
120 RTL_REG_CHIPVER,
121 RTL_REG_CHIPTYPE,
122 RTL_REG_CPUPORT,
123
124 RTL_REG_EN_CPUPORT,
125 RTL_REG_EN_TAG_OUT,
126 RTL_REG_EN_TAG_CLR,
127 RTL_REG_EN_TAG_IN,
128 RTL_REG_TRAP_CPU,
129 RTL_REG_CPU_LINKUP,
130 RTL_REG_TRUNK_PORTSEL,
131 RTL_REG_EN_TRUNK,
132 RTL_REG_RESET,
133
134 RTL_REG_VLAN_ENABLE,
135 RTL_REG_VLAN_FILTER,
136 RTL_REG_VLAN_TAG_ONLY,
137 RTL_REG_VLAN_TAG_AWARE,
138 #define RTL_VLAN_ENUM(id) \
139 RTL_REG_VLAN##id##_VID, \
140 RTL_REG_VLAN##id##_PORTMASK
141 RTL_VLAN_ENUM(0),
142 RTL_VLAN_ENUM(1),
143 RTL_VLAN_ENUM(2),
144 RTL_VLAN_ENUM(3),
145 RTL_VLAN_ENUM(4),
146 RTL_VLAN_ENUM(5),
147 RTL_VLAN_ENUM(6),
148 RTL_VLAN_ENUM(7),
149 RTL_VLAN_ENUM(8),
150 RTL_VLAN_ENUM(9),
151 RTL_VLAN_ENUM(10),
152 RTL_VLAN_ENUM(11),
153 RTL_VLAN_ENUM(12),
154 RTL_VLAN_ENUM(13),
155 RTL_VLAN_ENUM(14),
156 RTL_VLAN_ENUM(15),
157 #define RTL_PORT_ENUM(id) \
158 RTL_REG_PORT##id##_PVID, \
159 RTL_REG_PORT##id##_NULL_VID_REPLACE, \
160 RTL_REG_PORT##id##_NON_PVID_DISCARD, \
161 RTL_REG_PORT##id##_VID_INSERT, \
162 RTL_REG_PORT##id##_TAG_INSERT, \
163 RTL_REG_PORT##id##_LINK, \
164 RTL_REG_PORT##id##_SPEED, \
165 RTL_REG_PORT##id##_NWAY, \
166 RTL_REG_PORT##id##_NRESTART, \
167 RTL_REG_PORT##id##_DUPLEX, \
168 RTL_REG_PORT##id##_RXEN, \
169 RTL_REG_PORT##id##_TXEN
170 RTL_PORT_ENUM(0),
171 RTL_PORT_ENUM(1),
172 RTL_PORT_ENUM(2),
173 RTL_PORT_ENUM(3),
174 RTL_PORT_ENUM(4),
175 RTL_PORT_ENUM(5),
176 };
177
178 static const struct rtl_reg rtl_regs[] = {
179 [RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 },
180 [RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 },
181 [RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 },
182
183 /* CPU port number */
184 [RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 },
185 /* Enable CPU port function */
186 [RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 },
187 /* Enable CPU port tag insertion */
188 [RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 },
189 /* Enable CPU port tag removal */
190 [RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 },
191 /* Enable CPU port tag checking */
192 [RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 },
193 [RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 },
194 [RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 },
195 [RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 },
196
197 [RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 },
198 [RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 },
199
200 [RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 },
201 [RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 },
202 [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 },
203 [RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 },
204
205 #define RTL_VLAN_REGS(id, phy, page, regofs) \
206 [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
207 [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
208 RTL_VLAN_REGS( 0, 0, 0, 0),
209 RTL_VLAN_REGS( 1, 1, 0, 0),
210 RTL_VLAN_REGS( 2, 2, 0, 0),
211 RTL_VLAN_REGS( 3, 3, 0, 0),
212 RTL_VLAN_REGS( 4, 4, 0, 0),
213 RTL_VLAN_REGS( 5, 0, 1, 2),
214 RTL_VLAN_REGS( 6, 1, 1, 2),
215 RTL_VLAN_REGS( 7, 2, 1, 2),
216 RTL_VLAN_REGS( 8, 3, 1, 2),
217 RTL_VLAN_REGS( 9, 4, 1, 2),
218 RTL_VLAN_REGS(10, 0, 1, 4),
219 RTL_VLAN_REGS(11, 1, 1, 4),
220 RTL_VLAN_REGS(12, 2, 1, 4),
221 RTL_VLAN_REGS(13, 3, 1, 4),
222 RTL_VLAN_REGS(14, 4, 1, 4),
223 RTL_VLAN_REGS(15, 0, 1, 6),
224
225 #define REG_PORT_SETTING(port, phy) \
226 [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
227 [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
228 [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
229 [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
230 [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
231 [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
232 [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
233 [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
234 [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
235 [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
236 [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
237
238 REG_PORT_SETTING(0, 0),
239 REG_PORT_SETTING(1, 1),
240 REG_PORT_SETTING(2, 2),
241 REG_PORT_SETTING(3, 3),
242 REG_PORT_SETTING(4, 4),
243 REG_PORT_SETTING(5, 6),
244
245 #define REG_PORT_PVID(phy, page, regofs) \
246 { page, phy, 24 + regofs, 4, 12, 0 }
247 [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
248 [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
249 [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
250 [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
251 [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
252 [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
253 };
254
255
256 static inline void
257 rtl_set_page(struct rtl_priv *priv, unsigned int page)
258 {
259 struct mii_bus *bus = priv->bus;
260 u16 pgsel;
261
262 if (priv->fixup)
263 return;
264
265 if (priv->page == page)
266 return;
267
268 BUG_ON(page > RTL8306_NUM_PAGES);
269 pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
270 pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
271 if (page & (1 << 0))
272 pgsel |= RTL8306_REG_PAGE_LO;
273 if (!(page & (1 << 1))) /* bit is inverted */
274 pgsel |= RTL8306_REG_PAGE_HI;
275 bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
276 }
277
278 static inline int
279 rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
280 {
281 struct rtl_priv *priv = to_rtl(dev);
282 struct mii_bus *bus = priv->bus;
283
284 rtl_set_page(priv, page);
285 bus->write(bus, phy, reg, val);
286 bus->read(bus, phy, reg); /* flush */
287 return 0;
288 }
289
290 static inline int
291 rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
292 {
293 struct rtl_priv *priv = to_rtl(dev);
294 struct mii_bus *bus = priv->bus;
295
296 rtl_set_page(priv, page);
297 return bus->read(bus, phy, reg);
298 }
299
300 static inline u16
301 rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
302 {
303 struct rtl_priv *priv = to_rtl(dev);
304 struct mii_bus *bus = priv->bus;
305 u16 r;
306
307 rtl_set_page(priv, page);
308 r = bus->read(bus, phy, reg);
309 r &= ~mask;
310 r |= val;
311 bus->write(bus, phy, reg, r);
312 return bus->read(bus, phy, reg); /* flush */
313 }
314
315
316 static inline int
317 rtl_get(struct switch_dev *dev, enum rtl_regidx s)
318 {
319 const struct rtl_reg *r = &rtl_regs[s];
320 u16 val;
321
322 BUG_ON(s >= ARRAY_SIZE(rtl_regs));
323 if (r->bits == 0) /* unimplemented */
324 return 0;
325
326 val = rtl_r16(dev, r->page, r->phy, r->reg);
327
328 if (r->shift > 0)
329 val >>= r->shift;
330
331 if (r->inverted)
332 val = ~val;
333
334 val &= (1 << r->bits) - 1;
335
336 return val;
337 }
338
339 static int
340 rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
341 {
342 const struct rtl_reg *r = &rtl_regs[s];
343 u16 mask = 0xffff;
344
345 BUG_ON(s >= ARRAY_SIZE(rtl_regs));
346
347 if (r->bits == 0) /* unimplemented */
348 return 0;
349
350 if (r->shift > 0)
351 val <<= r->shift;
352
353 if (r->inverted)
354 val = ~val;
355
356 if (r->bits != 16) {
357 mask = (1 << r->bits) - 1;
358 mask <<= r->shift;
359 }
360 val &= mask;
361 return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
362 }
363
364 static void
365 rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
366 {
367 regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
368 regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
369 regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
370 }
371
372 static void
373 rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
374 {
375 rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway);
376 rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed);
377 rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex);
378 }
379
380 static void
381 rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
382 {
383 rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
384 rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
385
386 if ((port >= 5) || !enabled)
387 return;
388
389 /* restart autonegotiation if enabled */
390 rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1);
391 }
392
393 static int
394 rtl_hw_apply(struct switch_dev *dev)
395 {
396 int i;
397 int trunk_en, trunk_psel;
398 struct rtl_phyregs port5;
399
400 rtl_phy_save(dev, 5, &port5);
401
402 /* disable rx/tx from PHYs */
403 for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
404 rtl_port_set_enable(dev, i, 0);
405 }
406
407 /* save trunking status */
408 trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
409 trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
410
411 /* trunk port 3 and 4
412 * XXX: Big WTF, but RealTek seems to do it */
413 rtl_set(dev, RTL_REG_EN_TRUNK, 1);
414 rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
415
416 /* execute the software reset */
417 rtl_set(dev, RTL_REG_RESET, 1);
418
419 /* wait for the reset to complete,
420 * but don't wait for too long */
421 for (i = 0; i < 10; i++) {
422 if (rtl_get(dev, RTL_REG_RESET) == 0)
423 break;
424
425 msleep(1);
426 }
427
428 /* enable rx/tx from PHYs */
429 for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
430 rtl_port_set_enable(dev, i, 1);
431 }
432
433 /* restore trunking settings */
434 rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
435 rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
436 rtl_phy_restore(dev, 5, &port5);
437
438 rtl_set(dev, RTL_REG_CPU_LINKUP, 1);
439
440 return 0;
441 }
442
443 static void
444 rtl_hw_init(struct switch_dev *dev)
445 {
446 struct rtl_priv *priv = to_rtl(dev);
447 int cpu_mask = 1 << dev->cpu_port;
448 int i;
449
450 rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
451 rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
452 rtl_set(dev, RTL_REG_EN_TRUNK, 0);
453 rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
454
455 /* initialize cpu port settings */
456 if (priv->do_cpu) {
457 rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
458 rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
459 } else {
460 rtl_set(dev, RTL_REG_CPUPORT, 7);
461 rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
462 }
463 rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
464 rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
465 rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
466
467 /* reset all vlans */
468 for (i = 0; i < RTL8306_NUM_VLANS; i++) {
469 rtl_set(dev, RTL_VLAN_REG(i, VID), i);
470 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
471 }
472
473 /* default to port isolation */
474 for (i = 0; i < RTL8306_NUM_PORTS; i++) {
475 unsigned long mask;
476
477 if ((1 << i) == cpu_mask)
478 mask = ((1 << RTL8306_NUM_PORTS) - 1) & ~cpu_mask; /* all bits set */
479 else
480 mask = cpu_mask | (1 << i);
481
482 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), mask);
483 rtl_set(dev, RTL_PORT_REG(i, PVID), i);
484 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
485 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
486 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
487 }
488 rtl_hw_apply(dev);
489 }
490
491 #ifdef DEBUG
492 static int
493 rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
494 {
495 struct rtl_priv *priv = to_rtl(dev);
496 priv->do_cpu = val->value.i;
497 rtl_hw_init(dev);
498 return 0;
499 }
500
501 static int
502 rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
503 {
504 struct rtl_priv *priv = to_rtl(dev);
505 val->value.i = priv->do_cpu;
506 return 0;
507 }
508
509 static int
510 rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
511 {
512 dev->cpu_port = val->value.i;
513 rtl_hw_init(dev);
514 return 0;
515 }
516
517 static int
518 rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
519 {
520 val->value.i = dev->cpu_port;
521 return 0;
522 }
523 #endif
524
525 static int
526 rtl_reset(struct switch_dev *dev)
527 {
528 rtl_hw_init(dev);
529 return 0;
530 }
531
532 static int
533 rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
534 {
535 int idx = attr->id + (val->port_vlan * attr->ofs);
536 struct rtl_phyregs port;
537
538 if (attr->id >= ARRAY_SIZE(rtl_regs))
539 return -EINVAL;
540
541 if ((attr->max > 0) && (val->value.i > attr->max))
542 return -EINVAL;
543
544 /* access to phy register 22 on port 4/5
545 * needs phy status save/restore */
546 if ((val->port_vlan > 3) &&
547 (rtl_regs[idx].reg == 22) &&
548 (rtl_regs[idx].page == 0)) {
549
550 rtl_phy_save(dev, val->port_vlan, &port);
551 rtl_set(dev, idx, val->value.i);
552 rtl_phy_restore(dev, val->port_vlan, &port);
553 } else {
554 rtl_set(dev, idx, val->value.i);
555 }
556
557 return 0;
558 }
559
560 static int
561 rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
562 {
563 int idx = attr->id + (val->port_vlan * attr->ofs);
564
565 if (idx >= ARRAY_SIZE(rtl_regs))
566 return -EINVAL;
567
568 val->value.i = rtl_get(dev, idx);
569 return 0;
570 }
571
572 static int
573 rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
574 {
575 if (val->port_vlan >= RTL8306_NUM_PORTS)
576 return -EINVAL;
577
578 return rtl_attr_set_int(dev, attr, val);
579 }
580
581 static int
582 rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
583 {
584 if (val->port_vlan >= RTL8306_NUM_PORTS)
585 return -EINVAL;
586 return rtl_attr_get_int(dev, attr, val);
587 }
588
589 static int
590 rtl_get_port_link(struct switch_dev *dev, int port, struct switch_port_link *link)
591 {
592 if (port >= RTL8306_NUM_PORTS)
593 return -EINVAL;
594
595 link->link = rtl_get(dev, RTL_PORT_REG(port, LINK));
596 if (!link->link)
597 return 0;
598
599 link->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
600 link->aneg = rtl_get(dev, RTL_PORT_REG(port, NWAY));
601
602 if (rtl_get(dev, RTL_PORT_REG(port, SPEED)))
603 link->speed = SWITCH_PORT_SPEED_100;
604 else
605 link->speed = SWITCH_PORT_SPEED_10;
606
607 return 0;
608 }
609
610 static int
611 rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
612 {
613 if (val->port_vlan >= dev->vlans)
614 return -EINVAL;
615
616 return rtl_attr_set_int(dev, attr, val);
617 }
618
619 static int
620 rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
621 {
622 if (val->port_vlan >= dev->vlans)
623 return -EINVAL;
624
625 return rtl_attr_get_int(dev, attr, val);
626 }
627
628 static int
629 rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
630 {
631 unsigned int i, mask;
632
633 mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
634 for (i = 0; i < RTL8306_NUM_PORTS; i++) {
635 struct switch_port *port;
636
637 if (!(mask & (1 << i)))
638 continue;
639
640 port = &val->value.ports[val->len];
641 port->id = i;
642 if (rtl_get(dev, RTL_PORT_REG(i, TAG_INSERT)) == 2 || i == dev->cpu_port)
643 port->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
644 val->len++;
645 }
646
647 return 0;
648 }
649
650 static int
651 rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
652 {
653 struct rtl_priv *priv = to_rtl(dev);
654 struct rtl_phyregs port;
655 int en = val->value.i;
656 int i;
657
658 rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
659 rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
660 rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
661 rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
662 if (en)
663 rtl_set(dev, RTL_REG_VLAN_FILTER, en);
664
665 for (i = 0; i < RTL8306_NUM_PORTS; i++) {
666 if (i > 3)
667 rtl_phy_save(dev, val->port_vlan, &port);
668 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
669 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), (en ? (i == dev->cpu_port ? 0 : 1) : 1));
670 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? (i == dev->cpu_port ? 2 : 1) : 3));
671 if (i > 3)
672 rtl_phy_restore(dev, val->port_vlan, &port);
673 }
674 rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
675
676 return 0;
677 }
678
679 static int
680 rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
681 {
682 val->value.i = rtl_get(dev, RTL_REG_VLAN_ENABLE);
683 return 0;
684 }
685
686 static int
687 rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
688 {
689 unsigned int mask = 0;
690 unsigned int oldmask;
691 int i;
692
693 for(i = 0; i < val->len; i++)
694 {
695 struct switch_port *port = &val->value.ports[i];
696 bool tagged = false;
697
698 mask |= (1 << port->id);
699
700 if (port->id == dev->cpu_port)
701 continue;
702
703 if ((i == dev->cpu_port) ||
704 (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
705 tagged = true;
706
707 /* fix up PVIDs for added ports */
708 if (!tagged)
709 rtl_set(dev, RTL_PORT_REG(port->id, PVID), val->port_vlan);
710
711 rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
712 rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
713 rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
714 }
715
716 oldmask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
717 rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
718
719 /* fix up PVIDs for removed ports, default to last vlan */
720 oldmask &= ~mask;
721 for (i = 0; i < RTL8306_NUM_PORTS; i++) {
722 if (!(oldmask & (1 << i)))
723 continue;
724
725 if (i == dev->cpu_port)
726 continue;
727
728 if (rtl_get(dev, RTL_PORT_REG(i, PVID)) == val->port_vlan)
729 rtl_set(dev, RTL_PORT_REG(i, PVID), dev->vlans - 1);
730 }
731
732 return 0;
733 }
734
735 static struct switch_attr rtl_globals[] = {
736 {
737 .type = SWITCH_TYPE_INT,
738 .name = "enable_vlan",
739 .description = "Enable VLAN mode",
740 .max = 1,
741 .set = rtl_set_vlan,
742 .get = rtl_get_vlan,
743 },
744 {
745 RTL_GLOBAL_REGATTR(EN_TRUNK),
746 .name = "trunk",
747 .description = "Enable port trunking",
748 .max = 1,
749 },
750 {
751 RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
752 .name = "trunk_sel",
753 .description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
754 .max = 1,
755 },
756 #ifdef DEBUG
757 {
758 RTL_GLOBAL_REGATTR(VLAN_FILTER),
759 .name = "vlan_filter",
760 .description = "Filter incoming packets for allowed VLANS",
761 .max = 1,
762 },
763 {
764 .type = SWITCH_TYPE_INT,
765 .name = "cpuport",
766 .description = "CPU Port",
767 .set = rtl_set_cpuport,
768 .get = rtl_get_cpuport,
769 .max = RTL8306_NUM_PORTS,
770 },
771 {
772 .type = SWITCH_TYPE_INT,
773 .name = "use_cpuport",
774 .description = "CPU Port handling flag",
775 .set = rtl_set_use_cpuport,
776 .get = rtl_get_use_cpuport,
777 .max = RTL8306_NUM_PORTS,
778 },
779 {
780 RTL_GLOBAL_REGATTR(TRAP_CPU),
781 .name = "trap_cpu",
782 .description = "VLAN trap to CPU",
783 .max = 1,
784 },
785 {
786 RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
787 .name = "vlan_tag_aware",
788 .description = "Enable VLAN tag awareness",
789 .max = 1,
790 },
791 {
792 RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
793 .name = "tag_only",
794 .description = "Only accept tagged packets",
795 .max = 1,
796 },
797 #endif
798 };
799 static struct switch_attr rtl_port[] = {
800 {
801 RTL_PORT_REGATTR(PVID),
802 .name = "pvid",
803 .description = "Port VLAN ID",
804 .max = RTL8306_NUM_VLANS - 1,
805 },
806 #ifdef DEBUG
807 {
808 RTL_PORT_REGATTR(NULL_VID_REPLACE),
809 .name = "null_vid",
810 .description = "NULL VID gets replaced by port default vid",
811 .max = 1,
812 },
813 {
814 RTL_PORT_REGATTR(NON_PVID_DISCARD),
815 .name = "non_pvid_discard",
816 .description = "discard packets with VID != PVID",
817 .max = 1,
818 },
819 {
820 RTL_PORT_REGATTR(VID_INSERT),
821 .name = "vid_insert_remove",
822 .description = "how should the switch insert and remove vids ?",
823 .max = 3,
824 },
825 {
826 RTL_PORT_REGATTR(TAG_INSERT),
827 .name = "tag_insert",
828 .description = "tag insertion handling",
829 .max = 3,
830 },
831 #endif
832 };
833
834 static struct switch_attr rtl_vlan[] = {
835 {
836 RTL_VLAN_REGATTR(VID),
837 .name = "vid",
838 .description = "VLAN ID (1-4095)",
839 .max = 4095,
840 },
841 };
842
843 static const struct switch_dev_ops rtl8306_ops = {
844 .attr_global = {
845 .attr = rtl_globals,
846 .n_attr = ARRAY_SIZE(rtl_globals),
847 },
848 .attr_port = {
849 .attr = rtl_port,
850 .n_attr = ARRAY_SIZE(rtl_port),
851 },
852 .attr_vlan = {
853 .attr = rtl_vlan,
854 .n_attr = ARRAY_SIZE(rtl_vlan),
855 },
856
857 .get_vlan_ports = rtl_get_ports,
858 .set_vlan_ports = rtl_set_ports,
859 .apply_config = rtl_hw_apply,
860 .reset_switch = rtl_reset,
861 .get_port_link = rtl_get_port_link,
862 };
863
864 static int
865 rtl8306_config_init(struct phy_device *pdev)
866 {
867 struct net_device *netdev = pdev->attached_dev;
868 struct rtl_priv *priv = pdev->priv;
869 struct switch_dev *dev = &priv->dev;
870 struct switch_val val;
871 unsigned int chipid, chipver, chiptype;
872 int err;
873
874 /* Only init the switch for the primary PHY */
875 if (pdev->addr != 0)
876 return 0;
877
878 val.value.i = 1;
879 priv->dev.cpu_port = RTL8306_PORT_CPU;
880 priv->dev.ports = RTL8306_NUM_PORTS;
881 priv->dev.vlans = RTL8306_NUM_VLANS;
882 priv->dev.ops = &rtl8306_ops;
883 priv->do_cpu = 0;
884 priv->page = -1;
885 priv->bus = pdev->bus;
886
887 chipid = rtl_get(dev, RTL_REG_CHIPID);
888 chipver = rtl_get(dev, RTL_REG_CHIPVER);
889 chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
890 switch(chiptype) {
891 case 0:
892 case 2:
893 strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
894 priv->type = RTL_TYPE_S;
895 break;
896 case 1:
897 strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
898 priv->type = RTL_TYPE_SD;
899 break;
900 case 3:
901 strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
902 priv->type = RTL_TYPE_SDM;
903 break;
904 default:
905 strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
906 break;
907 }
908
909 dev->name = priv->hwname;
910 rtl_hw_init(dev);
911
912 printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
913
914 err = register_switch(dev, netdev);
915 if (err < 0) {
916 kfree(priv);
917 return err;
918 }
919
920 return 0;
921 }
922
923
924 static int
925 rtl8306_fixup(struct phy_device *pdev)
926 {
927 struct rtl_priv priv;
928 u16 chipid;
929
930 /* Attach to primary LAN port and WAN port */
931 if (pdev->addr != 0 && pdev->addr != 4)
932 return 0;
933
934 memset(&priv, 0, sizeof(priv));
935 priv.fixup = true;
936 priv.page = -1;
937 priv.bus = pdev->bus;
938 chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
939 if (chipid == 0x5988)
940 pdev->phy_id = RTL8306_MAGIC;
941
942 return 0;
943 }
944
945 static int
946 rtl8306_probe(struct phy_device *pdev)
947 {
948 struct rtl_priv *priv;
949
950 list_for_each_entry(priv, &phydevs, list) {
951 /*
952 * share one rtl_priv instance between virtual phy
953 * devices on the same bus
954 */
955 if (priv->bus == pdev->bus)
956 goto found;
957 }
958 priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
959 if (!priv)
960 return -ENOMEM;
961
962 priv->bus = pdev->bus;
963
964 found:
965 pdev->priv = priv;
966 return 0;
967 }
968
969 static void
970 rtl8306_remove(struct phy_device *pdev)
971 {
972 struct rtl_priv *priv = pdev->priv;
973 unregister_switch(&priv->dev);
974 kfree(priv);
975 }
976
977 static int
978 rtl8306_config_aneg(struct phy_device *pdev)
979 {
980 struct rtl_priv *priv = pdev->priv;
981
982 /* Only for WAN */
983 if (pdev->addr == 0)
984 return 0;
985
986 /* Restart autonegotiation */
987 rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1);
988 rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1);
989
990 return 0;
991 }
992
993 static int
994 rtl8306_read_status(struct phy_device *pdev)
995 {
996 struct rtl_priv *priv = pdev->priv;
997 struct switch_dev *dev = &priv->dev;
998
999 if (pdev->addr == 4) {
1000 /* WAN */
1001 pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
1002 pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
1003 pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK));
1004 } else {
1005 /* LAN */
1006 pdev->speed = SPEED_100;
1007 pdev->duplex = DUPLEX_FULL;
1008 pdev->link = 1;
1009 }
1010
1011 /*
1012 * Bypass generic PHY status read,
1013 * it doesn't work with this switch
1014 */
1015 if (pdev->link) {
1016 pdev->state = PHY_RUNNING;
1017 netif_carrier_on(pdev->attached_dev);
1018 pdev->adjust_link(pdev->attached_dev);
1019 } else {
1020 pdev->state = PHY_NOLINK;
1021 netif_carrier_off(pdev->attached_dev);
1022 pdev->adjust_link(pdev->attached_dev);
1023 }
1024
1025 return 0;
1026 }
1027
1028
1029 static struct phy_driver rtl8306_driver = {
1030 .name = "Realtek RTL8306S",
1031 .flags = PHY_HAS_MAGICANEG,
1032 .phy_id = RTL8306_MAGIC,
1033 .phy_id_mask = 0xffffffff,
1034 .features = PHY_BASIC_FEATURES,
1035 .probe = &rtl8306_probe,
1036 .remove = &rtl8306_remove,
1037 .config_init = &rtl8306_config_init,
1038 .config_aneg = &rtl8306_config_aneg,
1039 .read_status = &rtl8306_read_status,
1040 .driver = { .owner = THIS_MODULE,},
1041 };
1042
1043
1044 static int __init
1045 rtl_init(void)
1046 {
1047 phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
1048 return phy_driver_register(&rtl8306_driver);
1049 }
1050
1051 static void __exit
1052 rtl_exit(void)
1053 {
1054 phy_driver_unregister(&rtl8306_driver);
1055 }
1056
1057 module_init(rtl_init);
1058 module_exit(rtl_exit);
1059 MODULE_LICENSE("GPL");
1060