target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "TP-Link Archer C2600";
   7         compatible = "tplink,c2600", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &uart4;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power;
  29                 led-failsafe = &general;
  30                 led-running = &power;
  31                 led-upgrade = &general;
  32         };
  33
  34         chosen {
  35                 linux,stdout-path = "serial0:115200n8";
  36         };
  37
  38         soc {
  39                 pinmux@800000 {
  40                         button_pins: button_pins {
  41                                 mux {
  42                                         pins = "gpio16", "gpio54", "gpio65";
  43                                         function = "gpio";
  44                                         drive-strength = <2>;
  45                                         bias-pull-up;
  46                                 };
  47                         };
  48
  49                         i2c4_pins: i2c4_pinmux {
  50                                 mux {
  51                                         pins = "gpio12", "gpio13";
  52                                         function = "gsbi4";
  53                                         drive-strength = <12>;
  54                                         bias-disable;
  55                                 };
  56                         };
  57
  58                         led_pins: led_pins {
  59                                 mux {
  60                                         pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
  61                                                "gpio53", "gpio66";
  62                                         function = "gpio";
  63                                         drive-strength = <2>;
  64                                         bias-pull-up;
  65                                 };
  66                         };
  67
  68                         spi_pins: spi_pins {
  69                                 mux {
  70                                         pins = "gpio18", "gpio19", "gpio21";
  71                                         function = "gsbi5";
  72                                         bias-pull-down;
  73                                 };
  74
  75                                 data {
  76                                         pins = "gpio18", "gpio19";
  77                                         drive-strength = <10>;
  78                                 };
  79
  80                                 cs {
  81                                         pins = "gpio20";
  82                                         function = "gpio";
  83                                         drive-strength = <10>;
  84                                         bias-pull-up;
  85                                 };
  86
  87                                 clk {
  88                                         pins = "gpio21";
  89                                         drive-strength = <12>;
  90                                 };
  91                         };
  92
  93                         mdio0_pins: mdio0_pins {
  94                                 mux {
  95                                         pins = "gpio0", "gpio1";
  96                                         function = "gpio";
  97                                         drive-strength = <8>;
  98                                         bias-disable;
  99                                 };
 100                         };
 101
 102                         rgmii2_pins: rgmii2_pins {
 103                                 mux {
 104                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 105                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 106                                         function = "rgmii2";
 107                                         drive-strength = <8>;
 108                                         bias-disable;
 109                                 };
 110                         };
 111
 112                         usb0_pwr_en_pin: usb0_pwr_en_pin {
 113                                 mux {
 114                                         pins = "gpio25";
 115                                         function = "gpio";
 116                                         drive-strength = <10>;
 117                                         bias-pull-up;
 118                                         output-high;
 119                                 };
 120                         };
 121
 122                         usb1_pwr_en_pin: usb1_pwr_en_pin {
 123                                 mux {
 124                                         pins = "gpio23";
 125                                         function = "gpio";
 126                                         drive-strength = <10>;
 127                                         bias-pull-up;
 128                                         output-high;
 129                                 };
 130                         };
 131                 };
 132
 133                 gsbi@16300000 {
 134                         qcom,mode = <GSBI_PROT_I2C_UART>;
 135                         status = "ok";
 136                         serial@16340000 {
 137                                 status = "ok";
 138                         };
 139                         /*
 140                          * The i2c device on gsbi4 should not be enabled.
 141                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 142                          * RPM usage. Turning this on in kernel manifests as
 143                          * i2c failure for the RPM.
 144                          */
 145                 };
 146
 147                 gsbi5: gsbi@1a200000 {
 148                         qcom,mode = <GSBI_PROT_SPI>;
 149                         status = "ok";
 150
 151                         spi5: spi@1a280000 {
 152                                 status = "ok";
 153
 154                                 pinctrl-0 = <&spi_pins>;
 155                                 pinctrl-names = "default";
 156
 157                                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 158
 159                                 flash: m25p80@0 {
 160                                         compatible = "jedec,spi-nor";
 161                                         #address-cells = <1>;
 162                                         #size-cells = <1>;
 163                                         spi-max-frequency = <50000000>;
 164                                         reg = <0>;
 165
 166                                         SBL1@0 {
 167                                                 label = "SBL1";
 168                                                 reg = <0x0 0x20000>;
 169                                                 read-only;
 170                                         };
 171
 172                                         MIBIB@20000 {
 173                                                 label = "MIBIB";
 174                                                 reg = <0x20000 0x20000>;
 175                                                 read-only;
 176                                         };
 177
 178                                         SBL2@40000 {
 179                                                 label = "SBL2";
 180                                                 reg = <0x40000 0x20000>;
 181                                                 read-only;
 182                                         };
 183
 184                                         SBL3@60000 {
 185                                                 label = "SBL3";
 186                                                 reg = <0x60000 0x30000>;
 187                                                 read-only;
 188                                         };
 189
 190                                         DDRCONFIG@90000 {
 191                                                 label = "DDRCONFIG";
 192                                                 reg = <0x90000 0x10000>;
 193                                                 read-only;
 194                                         };
 195
 196                                         SSD@a0000 {
 197                                                 label = "SSD";
 198                                                 reg = <0xa0000 0x10000>;
 199                                                 read-only;
 200                                         };
 201
 202                                         TZ@b0000 {
 203                                                 label = "TZ";
 204                                                 reg = <0xb0000 0x30000>;
 205                                                 read-only;
 206                                         };
 207
 208                                         RPM@e0000 {
 209                                                 label = "RPM";
 210                                                 reg = <0xe0000 0x20000>;
 211                                                 read-only;
 212                                         };
 213
 214                                         fs-uboot@100000 {
 215                                                 label = "fs-uboot";
 216                                                 reg = <0x100000 0x70000>;
 217                                                 read-only;
 218                                         };
 219
 220                                         uboot-env@170000 {
 221                                                 label = "uboot-env";
 222                                                 reg = <0x170000 0x40000>;
 223                                                 read-only;
 224                                         };
 225
 226                                         radio@1b0000 {
 227                                                 label = "radio";
 228                                                 reg = <0x1b0000 0x40000>;
 229                                                 read-only;
 230                                         };
 231
 232                                         os-image@1f0000 {
 233                                                 label = "os-image";
 234                                                 reg = <0x1f0000 0x200000>;
 235                                         };
 236
 237                                         rootfs@3f0000 {
 238                                                 label = "rootfs";
 239                                                 reg = <0x3f0000 0x1b00000>;
 240                                         };
 241
 242                                         defaultmac: default-mac@1ef0000 {
 243                                                 label = "default-mac";
 244                                                 reg = <0x1ef0000 0x00200>;
 245                                                 read-only;
 246                                         };
 247
 248                                         pin@1ef0200 {
 249                                                 label = "pin";
 250                                                 reg = <0x1ef0200 0x00200>;
 251                                                 read-only;
 252                                         };
 253
 254                                         product-info@1ef0400 {
 255                                                 label = "product-info";
 256                                                 reg = <0x1ef0400 0x0fc00>;
 257                                                 read-only;
 258                                         };
 259
 260                                         partition-table@1f00000 {
 261                                                 label = "partition-table";
 262                                                 reg = <0x1f00000 0x10000>;
 263                                                 read-only;
 264                                         };
 265
 266                                         soft-version@1f10000 {
 267                                                 label = "soft-version";
 268                                                 reg = <0x1f10000 0x10000>;
 269                                                 read-only;
 270                                         };
 271
 272                                         support-list@1f20000 {
 273                                                 label = "support-list";
 274                                                 reg = <0x1f20000 0x10000>;
 275                                                 read-only;
 276                                         };
 277
 278                                         profile@1f30000 {
 279                                                 label = "profile";
 280                                                 reg = <0x1f30000 0x10000>;
 281                                                 read-only;
 282                                         };
 283
 284                                         default-config@1f40000 {
 285                                                 label = "default-config";
 286                                                 reg = <0x1f40000 0x10000>;
 287                                                 read-only;
 288                                         };
 289
 290                                         user-config@1f50000 {
 291                                                 label = "user-config";
 292                                                 reg = <0x1f50000 0x40000>;
 293                                                 read-only;
 294                                         };
 295
 296                                         qos-db@1f90000 {
 297                                                 label = "qos-db";
 298                                                 reg = <0x1f90000 0x40000>;
 299                                                 read-only;
 300                                         };
 301
 302                                         usb-config@1fd0000 {
 303                                                 label = "usb-config";
 304                                                 reg = <0x1fd0000 0x10000>;
 305                                                 read-only;
 306                                         };
 307
 308                                         log@1fe0000 {
 309                                                 label = "log";
 310                                                 reg = <0x1fe0000 0x20000>;
 311                                                 read-only;
 312                                         };
 313                                 };
 314                         };
 315                 };
 316
 317                 phy@100f8800 {          /* USB3 port 1 HS phy */
 318                         status = "ok";
 319                 };
 320
 321                 phy@100f8830 {          /* USB3 port 1 SS phy */
 322                         status = "ok";
 323                 };
 324
 325                 phy@110f8800 {          /* USB3 port 0 HS phy */
 326                         status = "ok";
 327                 };
 328
 329                 phy@110f8830 {          /* USB3 port 0 SS phy */
 330                         status = "ok";
 331                 };
 332
 333                 usb30@0 {
 334                         status = "ok";
 335
 336                         pinctrl-0 = <&usb0_pwr_en_pin>;
 337                         pinctrl-names = "default";
 338                 };
 339
 340                 usb30@1 {
 341                         status = "ok";
 342
 343                         pinctrl-0 = <&usb1_pwr_en_pin>;
 344                         pinctrl-names = "default";
 345                 };
 346
 347                 pcie0: pci@1b500000 {
 348                         status = "ok";
 349                         phy-tx0-term-offset = <7>;
 350                 };
 351
 352                 pcie1: pci@1b700000 {
 353                         status = "ok";
 354                         phy-tx0-term-offset = <7>;
 355                 };
 356
 357                 mdio0: mdio {
 358                         compatible = "virtual,mdio-gpio";
 359                         #address-cells = <1>;
 360                         #size-cells = <0>;
 361                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 362                         pinctrl-0 = <&mdio0_pins>;
 363                         pinctrl-names = "default";
 364
 365                         phy0: ethernet-phy@0 {
 366                                 device_type = "ethernet-phy";
 367                                 reg = <0>;
 368                                 qca,ar8327-initvals = <
 369                                         0x00004 0x7600000   /* PAD0_MODE */
 370                                         0x00008 0x1000000   /* PAD5_MODE */
 371                                         0x0000c 0x80        /* PAD6_MODE */
 372                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 373                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 374                                         0x0007c 0x4e        /* PORT0_STATUS */
 375                                         0x00094 0x4e        /* PORT6_STATUS */
 376                                         >;
 377                         };
 378
 379                         phy4: ethernet-phy@4 {
 380                                 device_type = "ethernet-phy";
 381                                 reg = <4>;
 382                         };
 383                 };
 384
 385                 gmac1: ethernet@37200000 {
 386                         status = "ok";
 387                         phy-mode = "rgmii";
 388                         qcom,id = <1>;
 389
 390                         pinctrl-0 = <&rgmii2_pins>;
 391                         pinctrl-names = "default";
 392
 393                         mtd-mac-address = <&defaultmac 0x8>;
 394                         mtd-mac-address-increment = <1>;
 395
 396                         fixed-link {
 397                                 speed = <1000>;
 398                                 full-duplex;
 399                         };
 400                 };
 401
 402                 gmac2: ethernet@37400000 {
 403                         status = "ok";
 404                         phy-mode = "sgmii";
 405                         qcom,id = <2>;
 406
 407                         mtd-mac-address = <&defaultmac 0x8>;
 408
 409                         fixed-link {
 410                                 speed = <1000>;
 411                                 full-duplex;
 412                         };
 413                 };
 414
 415                 rpm@108000 {
 416                         pinctrl-0 = <&i2c4_pins>;
 417                         pinctrl-names = "default";
 418                 };
 419         };
 420
 421         gpio-keys {
 422                 compatible = "gpio-keys";
 423                 pinctrl-0 = <&button_pins>;
 424                 pinctrl-names = "default";
 425
 426                 wifi {
 427                         label = "wifi";
 428                         gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
 429                         linux,code = <KEY_RFKILL>;
 430                 };
 431
 432                 reset {
 433                         label = "reset";
 434                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
 435                         linux,code = <KEY_RESTART>;
 436                 };
 437
 438                 wps {
 439                         label = "wps";
 440                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 441                         linux,code = <KEY_WPS_BUTTON>;
 442                 };
 443
 444                 ledswitch {
 445                         label = "ledswitch";
 446                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
 447                         linux,code = <KEY_LIGHTS_TOGGLE>;
 448                 };
 449         };
 450
 451         gpio-leds {
 452                 compatible = "gpio-leds";
 453                 pinctrl-0 = <&led_pins>;
 454                 pinctrl-names = "default";
 455
 456                 lan {
 457                         label = "c2600:white:lan";
 458                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
 459                 };
 460
 461                 usb4 {
 462                         label = "c2600:white:usb_4";
 463                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 464                 };
 465
 466                 usb2 {
 467                         label = "c2600:white:usb_2";
 468                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 469                 };
 470
 471                 wps {
 472                         label = "c2600:white:wps";
 473                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 474                 };
 475
 476                 wan_amber {
 477                         label = "c2600:amber:wan";
 478                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
 479                 };
 480
 481                 wan_white {
 482                         label = "c2600:white:wan";
 483                         gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
 484                 };
 485
 486                 power: power {
 487                         label = "c2600:white:power";
 488                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 489                         default-state = "keep";
 490                 };
 491
 492                 general: general {
 493                         label = "c2600:white:general";
 494                         gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
 495                 };
 496         };
 497 };
 498
 499 &adm_dma {
 500         status = "ok";
 501 };