target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         dsl = &dsl;
  17                         internet = &info_green;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x8000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nand-parts@0 {
  29                                 compatible = "gen_nand", "lantiq,nand-xway";
  30                                 bank-width = <2>;
  31                                 reg = <1 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "kernel";
  42                                                 reg = <0x0 0x400000>;
  43                                         };
  44
  45                                         partition@400000 {
  46                                                 label = "rootfs_ubi";
  47                                                 reg = <0x400000 0x3000000>;
  48                                         };
  49
  50                                         partition@3400000 {
  51                                                 label = "vr9_firmware";
  52                                                 reg = <0x3400000 0x400000>;
  53                                         };
  54                                         partition@3800000 {
  55                                                 label = "reserved";
  56                                                 reg = <0x3800000 0x3000000>;
  57                                         };
  58                                         partition@6800000 {
  59                                                 label = "config";
  60                                                 reg = <0x6800000 0x200000>;
  61                                         };
  62                                         partition@6a00000 {
  63                                                 label = "nand-filesystem";
  64                                                 reg = <0x6a00000 0x1600000>;
  65                                         };
  66                                 };
  67                         };
  68                 };
  69
  70                 gpio: pinmux@E100B10 {
  71                         pinctrl-names = "default";
  72                         pinctrl-0 = <&state_default>;
  73
  74                         state_default: pinmux {
  75                                 mdio {
  76                                         lantiq,groups = "mdio";
  77                                         lantiq,function = "mdio";
  78                                 };
  79                                 nand {
  80                                         lantiq,groups = "nand cle", "nand ale",
  81                                                         "nand rd", "nand cs1", "nand rdy";
  82                                         lantiq,function = "ebu";
  83                                         lantiq,pull = <1>;
  84                                 };
  85                                 phy-rst {
  86                                         lantiq,pins = "io37", "io44";
  87                                         lantiq,pull = <0>;
  88                                         lantiq,open-drain = <0>;
  89                                         lantiq,output = <1>;
  90                                 };
  91                                 pcie-rst {
  92                                         lantiq,pins = "io38";
  93                                         lantiq,pull = <0>;
  94                                         lantiq,output = <1>;
  95                                 };
  96                         };
  97                         pins_spi_default: pins_spi_default {
  98                                 spi_in {
  99                                         lantiq,groups = "spi_di";
 100                                         lantiq,function = "spi";
 101                                 };
 102                                 spi_out {
 103                                         lantiq,groups = "spi_do", "spi_clk",
 104                                                 "spi_cs4";
 105                                         lantiq,function = "spi";
 106                                         lantiq,output = <1>;
 107                                 };
 108                         };
 109                 };
 110
 111                 ifxhcd@E101000 {
 112                         status = "okay";
 113                         gpios = <&gpio 5 0
 114                                 &gpio 14 0>;
 115                         lantiq,portmask = <0x3>;
 116                 };
 117         };
 118
 119         ath9k_eep {
 120                 compatible = "ath9k,eeprom";
 121                 ath,eep-flash = <&ath9k_cal 0x985>;
 122                 ath,eep-endian;
 123                 ath,eep-swap;
 124         };
 125
 126         gphy-xrx200 {
 127                 compatible = "lantiq,phy-xrx200";
 128                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 129                 phys = [ 00 01 ];
 130         };
 131
 132         gpio-keys-polled {
 133                 compatible = "gpio-keys-polled";
 134                 #address-cells = <1>;
 135                 #size-cells = <0>;
 136                 poll-interval = <100>;
 137                 power {
 138                         label = "power";
 139                         gpios = <&gpio 1 0>;
 140                         linux,code = <0x100>;
 141                 };
 142 /*              wifi {
 143                         label = "wifi";
 144                         gpios = <&gpio 29 0>;
 145                         linux,code = <0x101>;
 146                 };*/
 147         };
 148
 149         gpio-leds {
 150                 compatible = "gpio-leds";
 151
 152                 power_green: power {
 153                         label = "fritz3370:green:power";
 154                         gpios = <&gpio 32 1>;
 155                         default-state = "keep";
 156                 };
 157                 power_red: power2 {
 158                         label = "fritz3370:red:power";
 159                         gpios = <&gpio 33 1>;
 160                 };
 161                 info_red {
 162                         label = "fritz3370:red:info";
 163                         gpios = <&gpio 34 1>;
 164                 };
 165                 wifi: wifi {
 166                         label = "fritz3370:green:wlan";
 167                         gpios = <&gpio 35 1>;
 168                 };
 169                 dsl: dsl {
 170                         label = "fritz3370:green:dsl";
 171                         gpios = <&gpio 36 1>;
 172                 };
 173                 lan {
 174                         label = "fritz3370:green:lan";
 175                         gpios = <&gpio 38 1>;
 176                 };
 177                 info_green: info_green {
 178                         label = "fritz3370:green:info";
 179                         gpios = <&gpio 47 1>;
 180                 };
 181         };
 182 };
 183
 184 &spi {
 185         pinctrl-names = "default";
 186         pinctrl-0 = <&pins_spi_default>;
 187
 188         status = "ok";
 189
 190         m25p80@4 {
 191                 #address-cells = <1>;
 192                 #size-cells = <1>;
 193                 compatible = "jedec,spi-nor";
 194                 reg = <4 0>;
 195                 spi-max-frequency = <1000000>;
 196
 197                 ath9k_cal: partition@0 {
 198                         reg = <0x0 0x20000>;
 199                         label = "urlader";
 200                         read-only;
 201                 };
 202
 203                 partition@20000 {
 204                         reg = <0x20000 0x10000>;
 205                         label = "tffs (1)";
 206                         read-only;
 207                 };
 208
 209                 partition@30000 {
 210                         reg = <0x30000 0x10000>;
 211                         label = "tffs (2)";
 212                         read-only;
 213                 };
 214         };
 215 };
 216
 217 &eth0 {
 218         lan: interface@0 {
 219                 compatible = "lantiq,xrx200-pdi";
 220                 #address-cells = <1>;
 221                 #size-cells = <0>;
 222                 reg = <0>;
 223                 mac-address = [ 00 11 22 33 44 55 ];
 224                 lantiq,switch;
 225
 226                 ethernet@0 {
 227                         compatible = "lantiq,xrx200-pdi-port";
 228                         reg = <0>;
 229                         phy-mode = "rgmii";
 230                         phy-handle = <&phy0>;
 231                         gpios = <&gpio 37 0>;
 232                 };
 233                 ethernet@1 {
 234                         compatible = "lantiq,xrx200-pdi-port";
 235                         reg = <1>;
 236                         phy-mode = "rgmii";
 237                         phy-handle = <&phy1>;
 238                         gpios = <&gpio 44 0>;
 239                 };
 240                 ethernet@2 {
 241                         compatible = "lantiq,xrx200-pdi-port";
 242                         reg = <2>;
 243                         phy-mode = "gmii";
 244                         phy-handle = <&phy11>;
 245                 };
 246                 ethernet@3 {
 247                         compatible = "lantiq,xrx200-pdi-port";
 248                         reg = <4>;
 249                         phy-mode = "gmii";
 250                         phy-handle = <&phy13>;
 251                 };
 252         };
 253
 254         mdio@0 {
 255                 #address-cells = <1>;
 256                 #size-cells = <0>;
 257                 compatible = "lantiq,xrx200-mdio";
 258                 phy0: ethernet-phy@0 {
 259                         reg = <0x0>;
 260                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 261                 };
 262                 phy1: ethernet-phy@1 {
 263                         reg = <0x1>;
 264                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 265                 };
 266                 phy11: ethernet-phy@11 {
 267                         reg = <0x11>;
 268                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 269                 };
 270                 phy13: ethernet-phy@13 {
 271                         reg = <0x13>;
 272                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 273                 };
 274         };
 275 };