config interface loopback option ifname lo option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 config interface lan option ifname eth0 option type bridge option proto static option ipaddr 192.168.1.1 option netmask 255.255.255.0 config interface wan option ifname eth1 option proto dhcp config switch option name rtl8366s option reset 1 option enable_vlan 1 # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms option blinkrate 2 config switch_vlan option device rtl8366s option vlan 1 option ports "0 1 2 3 5" config switch_port # Port 1 controls the GREEN configuration of LEDs for # the switch and the section does not correspond to a real # switch port. # # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); # 14: Link (master); 15: separate register option device rtl8366s option port 1 option led 9 config switch_port # Port 2 controls the ORANGE configuration of LEDs for # the switch and the section does not correspond to a real # switch port. # # See the key above for switch port 1 for the meaning of the # 'led' setting below. option device rtl8366s option port 2 option led 6 config switch_port # Port 5 controls the configuration of the WAN LED and the # section does not correspond to a real switch port. # # To toggle the use of green or orange LEDs for the WAN port, # see the LED setting for wndr3700:green:wan in /etc/config/system. # # See the key above for switch port 1 for the meaning of the # 'led' setting below. option device rtl8366s option port 5 option led 6