# # Copyright (C) 2008-2011 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk define imgname $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1) endef define sysupname $(call imgname,$(1),$(2))-sysupgrade.bin endef VMLINUX:=$(IMG_PREFIX)-vmlinux UIMAGE:=$(IMG_PREFIX)-uImage define Image/Build/Initramfs $(call Image/Build/Profile/$(PROFILE),initramfs) endef DEVICE_VARS += DTS IMAGE_SIZE loadaddr-y := 0x80000000 loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000 loadaddr-$(CONFIG_TARGET_ramips_mt7621) := 0x80001000 KERNEL_LOADADDR := $(loadaddr-y) KERNEL_DTB = kernel-bin | patch-dtb | lzma define Device/Default KERNEL_DEPENDS = $$(wildcard ../dts/$$(DTS).dts) KERNEL := $(KERNEL_DTB) | uImage lzma IMAGES := sysupgrade.bin IMAGE_SIZE := $(ralink_default_fw_size_8M) IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) endef define Build/patch-dtb $(call Image/BuildDTB,../dts/$(DTS).dts,$@.dtb) $(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb endef define Build/trx $(STAGING_DIR_HOST)/bin/trx \ -o $@ \ -m $(IMAGE_SIZE) \ -f $(word 1,$^) \ -a 4 -f $(word 2,$^) endef define Build/seama $(STAGING_DIR_HOST)/bin/seama -i $@ $(1) mv $@.seama $@ endef define Build/seama-seal $(call Build/seama,-s $@.seama $(1)) endef define Build/relocate-kernel ( \ dd if=$(KDIR)/loader.bin bs=32 conv=sync && \ perl -e '@s = stat("$@"); print pack("V", @s[7])' && \ cat $@ \ ) > $@.new mv $@.new $@ endef define Build/ubnt-erx-factory-compat echo '21001:6' > $@.compat $(TAR) -cf $@ --transform='s/^.*/compat/' $@.compat $(RM) $@.compat endef define Build/ubnt-erx-factory-kernel if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) ]; then \ $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \ \ md5sum --binary $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) | awk '{print $$1}'> $@.md5; \ $(TAR) -rf $@ --transform='s/^.*/vmlinux.tmp.md5/' $@.md5; \ $(RM) $@.md5; \ fi endef define Build/ubnt-erx-factory-rootfs echo "dummy" > $@.rootfs $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp/' $@.rootfs md5sum --binary $@.rootfs | awk '{print $$1}'> $@.md5 $(TAR) -rf $@ --transform='s/^.*/squashfs.tmp.md5/' $@.md5 $(RM) $@.md5 $(RM) $@.rootfs endef define Build/ubnt-erx-factory-version echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $@.version $(TAR) -rf $@ --transform='s/^.*/version.tmp/' $@.version $(RM) $@.version endef #We need kernel+initrams fit into kernel partition define Build/ubnt-erx-factory-check-size @[ $$(($(subst k,* 1024,$(subst m, * 1024k,$(1))))) -ge "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" ] || { \ echo "WARNING: Initramfs kernel for image $@ is too big (kernel size: $$($(TAR) -xf $@ vmlinux.tmp -O | wc -c), max size $(1))" >&2; \ $(RM) -f $@; \ } @[ "$$($(TAR) -xf $@ vmlinux.tmp -O | wc -c)" -gt 0 ] || { \ echo "WARNING: Kernel for image $@ not found" >&2; \ $(RM) -f $@; \ } endef define MkCombineduImage $(call PatchKernelLzma,$(2),$(3)) if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \ echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \ else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \ echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \ else \ ( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=`expr $(4) - 64` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.lzma.combined ; \ fi ; fi $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6)) endef # # The real magic happens inside these templates # # $(1), compression method # $(2), filename of image data # $(3), output filename define MkImage $(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION))) -mkimage -A mips -O linux -T kernel -C $(1) -a $(loadaddr-y) -e $(loadaddr-y) \ -n "$(imagename)" \ -d $(2) $(3) endef define CompressLzma $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2) endef define MkImageSysupgrade/squashfs $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin) cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name) $(call prepare_generic_squashfs,$(KDIR)/$(output_name)) if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \ echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \ else \ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \ fi endef define MkImageTpl/squashfs $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin) -$(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -j \ -o $(KDIR)/$(output_name) \ -k $(KDIR)/vmlinux-$(1)$(4).bin.lzma \ -r $(KDIR)/root.$(1) && \ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name) endef define MkImageTpl/initramfs $(eval output_name=$(IMG_PREFIX)-$(2)-$(1).bin) -$(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -c \ -o $(KDIR)/$(output_name) \ -k $(KDIR)/vmlinux-$(1).bin.lzma && \ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name) endef # $(1), lowercase board name like "mt7620a_v22sg" # $(2), DTS filename without .dts extension # $(3), optional filename suffix, e.g. "-initramfs" define PatchKernelLzmaDtb cp $(KDIR)/vmlinux$(3) $(KDIR)/vmlinux-$(1)$(3) $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1)$(3) $(KDIR)/$(2).dtb $(call CompressLzma,$(KDIR)/vmlinux-$(1)$(3),$(KDIR)/vmlinux-$(1)$(3).bin.lzma) endef # $(1), lowercase board name # $(2), DTS filename without .dts extension # $(3), ih_name field of uImage header # $(4), optional filename suffix, e.g. "-initramfs" define MkImageLzmaDtb $(call PatchKernelLzmaDtb,$(1),$(2),$(4)) $(call MkImage,lzma,$(KDIR)/vmlinux-$(1)$(4).bin.lzma,$(KDIR)/vmlinux-$(1)$(4).uImage,$(3)) endef # $(1), Rootfs type, e.g. squashfs # $(2), lowercase board name # $(3), DTS filename without .dts extension # $(4), maximum size of sysupgrade image # $(5), uImage header's ih_name field define BuildFirmware/OF $(call MkImageLzmaDtb,$(2),$(3),$(5)) $(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6)) endef define BuildFirmware/OF/tplink $(call PatchKernelLzmaDtb,$(1),$(2),$(4)) $(call MkImageTpl/$(1),$(1),$(2),$(4),$(5)) endef define BuildFirmware/OF/tplink/initramfs $(call PatchKernelLzmaDtb,$(2),$(3),-initramfs) $(call MkImageTpl/$(1),$(1),$(2),$(4),$(5)) endef # $(1), squashfs/initramfs # $(2), lowercase board name # $(3), DTS filename without .dts extension # $(4), ih_name field of uImage header define BuildFirmware/OF/initramfs $(call MkImageLzmaDtb,$(2),$(3),$(4),-initramfs) $(CP) $(KDIR)/vmlinux-$(2)-initramfs.uImage $(call imgname,$(1),$(2))-uImage.bin endef # Build images for default ralink layout for 4MB flash # kernel + roots = 0x3b0000 # $(1) = squashfs/initramfs # $(2) = lowercase board name # $(3) = dts file ralink_default_fw_size_4M=3866624 BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M),$(4)) BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) # Build images for default ralink layout for 8MB flash # kernel + roots = 0x7b0000 # $(1) = squashfs/initramfs # $(2) = lowercase board name # $(3) = dts file # $(4) = uImage header name field ralink_default_fw_size_8M=8060928 BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4)) BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) BuildFirmware/Tplink/squashfs=$(call BuildFirmware/OF/tplink,$(1),$(2),$(3),$(4)) BuildFirmware/Tplink/initramfs=$(call BuildFirmware/OF/tplink/initramfs,$(1),$(2),$(3),$(4)) ralink_default_fw_size_16M=16121856 BuildFirmware/Default16M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_16M),$(4)) BuildFirmware/Default16M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) ralink_default_fw_size_32M=33226752 BuildFirmware/Default32M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_32M),$(4)) BuildFirmware/Default32M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) # Build images for a custom sized flash layout # $(1) = squashfs/initramfs # $(2) = lowercase board name # $(3) = dts file # $(4) = kernel + rootfs size BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6)) BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # wrappers for boards that have 4MB and 8MB versions define BuildFirmware/DefaultDualSize/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M) $(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M) endef define BuildFirmware/DefaultDualSize/initramfs $(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M) $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M) endef # Some boards need a special header inside the uImage to make them bootable define BuildFirmware/CustomFlashFactory/squashfs $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4)) $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6)) endef BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # sign an image to make it work with edimax tftp recovery define BuildFirmware/Edimax/squashfs $(call BuildFirmware/OF,$(1),$(2),$(3),$(4)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkedimaximg -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin \ -s $(5) -m $(6) -f $(7) -S $(8); \ fi endef BuildFirmware/Edimax/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # build Seama header images define BuildFirmware/Seama/squashfs $(call MkImageLzmaDtb,$(2),$(3),$(5)) $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin) cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $$$$(($(5) - 64)) ]; then \ echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \ else \ dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \ ( \ dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ ) > $(KDIR)/vmlinux-$(2).tmp; \ $(STAGING_DIR_HOST)/bin/seama \ -i $(KDIR)/vmlinux-$(2).tmp \ -m "dev=/dev/mtdblock/2" -m "type=firmware"; \ $(STAGING_DIR_HOST)/bin/seama \ -s $(call imgname,$(1),$(2))-factory.bin \ -m "signature=$(4)" \ -i $(KDIR)/vmlinux-$(2).tmp.seama; \ dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \ $(STAGING_DIR_HOST)/bin/seama \ -i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \ -m "dev=/dev/mtdblock/2" -m "type=firmware"; \ ( \ dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ ) > $(BIN_DIR)/$(output_name); \ fi endef BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # sign Buffalo images define BuildFirmware/Buffalo if [ -e "$(call sysupname,$(1),$(2))" ]; then \ buffalo-enc -p $(3) -v 1.76 \ -i $(KDIR)/vmlinux-$(2).uImage \ -o $(KDIR)/vmlinux-$(2).uImage.enc; \ buffalo-enc -p $(3) -v 1.76 \ -i $(KDIR)/root.$(1) \ -o $(KDIR)/root.$(2).enc; \ buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \ -l mlang8 -f 1 -r EU \ -i $(KDIR)/vmlinux-$(2).uImage.enc \ -i $(KDIR)/root.$(2).enc \ -o $(call imgname,$(1),$(2))-factory-EU.bin; \ fi endef # sign trednet / UMedia images define BuildFirmware/UMedia/squashfs $(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ fix-u-media-header -T 0x46 -B $(4) \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin; \ fi endef BuildFirmware/UMedia/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # sign dap 1350 based images dap1350_mtd_size=7667712 define BuildFirmware/dap1350/squashfs $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(dap1350_mtd_size)) -mkdapimg -s $(4) \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef BuildFirmware/dap1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # Sign Poray images define BuildFirmware/Poray4M/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkporayfw -B $(3) -F 4M \ -f $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin; \ fi endef BuildFirmware/Poray4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) define BuildFirmware/Poray8M/squashfs $(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkporayfw -B $(3) -F 8M \ -f $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin; \ fi endef BuildFirmware/Poray8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) define BuildFirmware/PorayDualSize/squashfs $(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \ mkporayfw -B $(3) -F 4M \ -f $(call sysupname,$(1),$(2)-4M) \ -o $(call imgname,$(1),$(2)-4M)-factory.bin; \ fi if [ -e "$(call sysupname,$(1),$(2)-8M)" ]; then \ mkporayfw -B $(3) -F 8M \ -f $(call sysupname,$(1),$(2)-8M) \ -o $(call imgname,$(1),$(2)-8M)-factory.bin; \ fi endef BuildFirmware/PorayDualSize/initramfs=$(call BuildFirmware/DefaultDualSize/initramfs,$(1),$(2),$(3)) define BuildFirmware/Gemtek/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ mkheader_gemtek "$(call sysupname,$(1),$(2))" \ "$(call imgname,$(1),$(2))-factory.bin" $(2) || \ rm -f "$(call imgname,$(1),$(2))-factory.bin"; \ fi endef BuildFirmware/Gemtek/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) # Airlink101 AR670W -- LZMA without uImage header define BuildFirmware/AR670W/squashfs $(call PatchKernelLzmaDtb,$(2),$(3),$(5)) $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin) $(eval factory_name=$(IMG_PREFIX)-$(2)-$(1)-factory.bin) ( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=65536 \ conv=sync; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/$(output_name) $(call prepare_generic_squashfs,$(KDIR)/$(output_name)) if [ `stat -c%s "$(KDIR)/$(output_name)"` \ -gt $(ralink_default_fw_size_4M) ]; then \ echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \ else \ mkwrgimg -i $(KDIR)/$(output_name) \ -d "/dev/mtdblock/2" \ -s "wrgn16a_airlink_ar670w" \ -o $(BIN_DIR)/$(factory_name); \ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \ fi endef # # RT288X Profiles # Image/Build/Profile/AR670W=$(call BuildFirmware/AR670W/$(1),$(1),ar670w,AR670W) Image/Build/Profile/AR725W=$(call BuildFirmware/Gemtek/$(1),$(1),ar725w,AR725W) # 0x790000 belkin_f5d8235v1_mtd_size=7929856 Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size)) Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RT-N15) Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE) Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N) Image/Build/Profile/WZRAGL300NH=$(call BuildFirmware/Default4M/$(1),$(1),wzr-agl300nh,WZR-AGL300NH) ifeq ($(SUBTARGET),rt288x) define Image/Build/Profile/Default $(call Image/Build/Profile/AR670W,$(1)) $(call Image/Build/Profile/AR725W,$(1)) $(call Image/Build/Profile/F5D8235V1,$(1)) $(call Image/Build/Profile/RTN15,$(1)) $(call Image/Build/Profile/V11STFE,$(1)) $(call Image/Build/Profile/WLITX4AG300N,$(1)) $(call Image/Build/Profile/WZRAGL300NH,$(1)) endef endif # # RT305X Profiles # Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,$(ralink_default_fw_size_4M)) edimax_3g6200n_mtd_size=3735552 Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000) Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-6200NL,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000) Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory) Image/Build/Profile/A5-V11=$(call BuildFirmware/Poray4M/$(1),$(1),a5-v11,A5-V11) Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII) define BuildFirmware/UIMAGE_8M $(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7)) endef define Image/Build/Profile/ALL02393G $(call Image/Build/Template/$(image_type)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys) endef Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0256n,ALL0256N) allnet_all5002_mtd_size=33226752 Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size)) Image/Build/Profile/ALL5003=$(call BuildFirmware/CustomFlash/$(1),$(1),all5003,ALL5003,$(allnet_all5002_mtd_size)) argus_atp52b_mtd_size=7995392 Image/Build/Profile/ATP-52B=$(call BuildFirmware/CustomFlash/$(1),$(1),atp-52b,ATP-52B,$(argus_atp52b_mtd_size)) asl26555_8mb_mtd_size=7929856 asl26555_16mb_mtd_size=16252928 define BuildFirmware/ASL26555/squashfs $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(asl26555_8mb_mtd_size)) $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(asl26555_16mb_mtd_size)) endef define BuildFirmware/ASL26555/initramfs $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M) $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M) endef Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555) Image/Build/Profile/AWM002EVB=$(call BuildFirmware/DefaultDualSize/$(1),$(1),awm002-evb,AWM002-EVB) Image/Build/Profile/AWM003EVB=$(call BuildFirmware/Default8M/$(1),$(1),awm003-evb,AWM003-EVB) Image/Build/Profile/AWAPN2403=$(call BuildFirmware/Default4M/$(1),$(1),awmapn2403,AWAPN2403) Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2) broadway_mtd_size=7929856 Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),broadway,BROADWAY,$(broadway_mtd_size),Broadway Kernel Image,factory) Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA) Image/Build/Profile/D105=$(call BuildFirmware/Default4M/$(1),$(1),d105,D105) define BuildFirmware/JCG/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) -jcgimage -o $(call imgname,$(1),$(2))-factory.bin \ -u $(call sysupname,$(1),$(2)) -v $(4) endef Image/Build/Profile/JHR-N805R=$(call BuildFirmware/JCG/$(1),$(1),jhr-n805r,JHR-N805R,29.24) Image/Build/Profile/JHR-N825R=$(call BuildFirmware/JCG/$(1),$(1),jhr-n825r,JHR-N825R,23.24) Image/Build/Profile/JHR-N926R=$(call BuildFirmware/JCG/$(1),$(1),jhr-n926r,JHR-N926R,25.24) define Image/Build/Profile/JCG $(call Image/Build/Profile/JHR-N805R,$(1)) $(call Image/Build/Profile/JHR-N825R,$(1)) $(call Image/Build/Profile/JHR-N926R,$(1)) endef define BuildFirmware/DIR300B1/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) -mkwrgimg -s $(4) -d /dev/mtdblock/2 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef BuildFirmware/DIR300B1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b) Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d) Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1) Image/Build/Profile/DIR-620-D1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-d1,DIR-620-D1) define BuildFirmware/DIR615H1/squashfs $(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1) -mksenaofw -e $(call sysupname,$(1),dir-615-h1) \ -o $(call imgname,$(1),dir-615-h1)-factory.bin \ -r 0x218 -p 0x30 -t 3 endef BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1) Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1)) Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-1350,RT3052-AP-DAP1350-3) Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3) define BuildFirmware/DCS930/squashfs $(call BuildFirmware/Default4M/squashfs,squashfs,$(2),$(3)) dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/image.$(2).combined bs=1048512 count=1 conv=sync cat $(KDIR)/root.squashfs >> $(KDIR)/image.$(2).combined $(call MkImage,lzma,$(KDIR)/image.$(2).combined,$(KDIR)/image.$(2)) $(call prepare_generic_squashfs,$(KDIR)/image.$(2)) if [ `stat -c%s "$(KDIR)/image.$(2)"` -gt $(ralink_default_fw_size_4M) ]; then \ echo "Warning: $(KDIR)/image.$(2) is too big" >&2; \ else \ dd if=$(KDIR)/image.$(2) of=$(KDIR)/dcs.tmp bs=64K count=5 conv=sync ;\ cat $(KDIR)/image.$(2) >> $(KDIR)/dcs.tmp ; \ dd if=$(KDIR)/dcs.tmp of=$(call imgname,$(1),$(2))-factory.bin bs=4096k count=1 conv=sync ;\ $(STAGING_DIR_HOST)/bin/mkdcs932 $(call imgname,$(1),$(2))-factory.bin ; \ fi endef BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930) Image/Build/Profile/DCS930LB1=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930l-b1,DCS-930L-B1) Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753) Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G) belkin_f5d8235v2_mtd_size=7929856 Image/Build/Profile/F5D8235V2=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v2,F5D8235_V2,$(belkin_f5d8235v2_mtd_size)) # 0x770000 belkin_f7c027_mtd_size=7798784 Image/Build/Profile/F7C027=$(call BuildFirmware/CustomFlash/$(1),$(1),f7c027,F7C027,$(belkin_f7c027_mtd_size)) Image/Build/Profile/FONERA20N=$(call BuildFirmware/Edimax/$(1),$(1),fonera20n,FONERA20N,$(ralink_default_fw_size_8M),RSDK,NL1T,0x50000,0xc0000) Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U) #Image/Build/Profile/HG255D=$(call BuildFirmware/Default16M/$(1),$(1),hg255d,HG255D) Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5) Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202) BuildFirmware/HLKRM04/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4)) define BuildFirmware/HLKRM04/initramfs $(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin; endef Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM04) Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02) Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3) Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN) # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image) Image/Build/Profile/MR102N=$(call BuildFirmware/Default8M/$(1),$(1),mr-102n,MR-102N) Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) Image/Build/Profile/DIR-300-B7=$(call BuildFirmware/Default4M/$(1),$(1),dir-300-b7,DIR-300-B7) Image/Build/Profile/DIR-320-B1=$(call BuildFirmware/Default8M/$(1),$(1),dir-320-b1,DIR-320-B1) Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N) Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000) Image/Build/Profile/MZKWDPR=$(call BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR) Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W) nw718_mtd_size=3801088 Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image) Image/Build/Profile/MINIEMBPLUG=$(call BuildFirmware/Default8M/$(1),$(1),miniembplug,MINIEMBPLUG) Image/Build/Profile/MINIEMBWIFI=$(call BuildFirmware/Default8M/$(1),$(1),miniembwifi,MINIEMBWIFI) Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W) Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004) Image/Build/Profile/PX-4885=$(call BuildFirmware/DefaultDualSize/$(1),$(1),px-4885,PX-4885) Image/Build/Profile/RT5350F-OLINUXINO=$(call BuildFirmware/Default8M/$(1),$(1),rt5350f-olinuxino,RT5350F-OLINUXINO) Image/Build/Profile/RT5350F-OLINUXINO-EVB=$(call BuildFirmware/Default8M/$(1),$(1),rt5350f-olinuxino-evb,RT5350F-OLINUXINO-EVB) Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1) Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS) Image/Build/Profile/RUT5XX=$(call BuildFirmware/Default8M/$(1),$(1),rut5xx,RUT5XX) Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205) Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2) vocore_8mb_mtd_size=8060928 vocore_16mb_mtd_size=16449536 define BuildFirmware/VOCORE/squashfs $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(vocore_8mb_mtd_size)) $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(vocore_16mb_mtd_size)) endef define BuildFirmware/VOCORE/initramfs $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M) $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M) endef Image/Build/Profile/VOCORE=$(call BuildFirmware/VOCORE/$(1),$(1),vocore,VOCORE) Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory) Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory) Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U) Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN) Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N) buffalo_whrg300n_mtd_size=3801088 define BuildFirmware/WHRG300N/squashfs $(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N) # the following line has a bad argument 3 ... the old Makefile was already broken $(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ ( \ echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ dd bs=512 count=1 conv=sync; \ dd if=$(call sysupname,$(1),whr-g300n); \ ) > $(KDIR)/whr-g300n-tftp.tmp && \ buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \ -o $(call imgname,$(1),whr-g300n)-tftp.bin; \ fi endef BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N) Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1)) Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image) Image/Build/Profile/WIZFI630A=$(call BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A) Image/Build/Profile/WL-330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL-330N) Image/Build/Profile/WL-330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL-330N3G) kernel_size_wl341v3=917504 rootfs_size_wl341v3=2949120 define BuildFirmware/WL-341V3/squashfs $(call BuildFirmware/Default4M/$(1),$(1),wl-341v3,WL-341V3) # This code looks broken and really needs to be converted to C if [ -e "$(call sysupname,$(1),$(2))" ]; then \ ( \ dd if=/dev/zero bs=195936 count=1; \ echo "1.01"; \ dd if=/dev/zero bs=581 count=1; \ echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ dd if=/dev/zero bs=65552 count=1; \ dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ ) > $(call imgname,$(1),$(2))-factory.bin; \ fi endef BuildFirmware/WL-341V3/initramfs=$(call BuildFirmware/OF/initramfs,$(1),wl-341v3,WL-341V3) Image/Build/Profile/WL-341V3=$(call BuildFirmware/WL-341V3/$(1),$(1)) Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351) define BuildFirmware/WNCE2001/squashfs $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3)) -mkdapimg -s RT3052-AP-WNCE2001-3 -r WW -v 1.0.0.99 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory-worldwide.bin -mkdapimg -s RT3052-AP-WNCE2001-3 -r NA -v 1.0.0.99 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory-northamerica.bin endef BuildFirmware/WNCE2001/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3)) Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WNCE2001) Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN) Image/Build/Profile/WT1520=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt1520,WT1520) Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G) Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN) Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202) Image/Build/Profile/X5=$(call BuildFirmware/Poray8M/$(1),$(1),x5,X5) Image/Build/Profile/X8=$(call BuildFirmware/Poray8M/$(1),$(1),x8,X8) Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J) ifeq ($(SUBTARGET),rt305x) define Image/Build/Profile/Default $(call Image/Build/Profile/3G6200N,$(1)) $(call Image/Build/Profile/3G6200NL,$(1)) $(call Image/Build/Profile/3G150B,$(1)) $(call Image/Build/Profile/3G300M,$(1)) $(call Image/Build/Profile/A5-V11,$(1)) $(call Image/Build/Profile/AIR3GII,$(1)) $(call Image/Build/Profile/ALL02393G,$(1)) $(call Image/Build/Profile/ALL0256N,$(1)) $(call Image/Build/Profile/ALL5002,$(1)) $(call Image/Build/Profile/ALL5003,$(1)) $(call Image/Build/Profile/ASL26555,$(1)) $(call Image/Build/Profile/ATP-52B,$(1)) $(call Image/Build/Profile/AWM002EVB,$(1)) $(call Image/Build/Profile/AWAPN2403,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/BROADWAY,$(1)) $(call Image/Build/Profile/CARAMBOLA,$(1)) $(call Image/Build/Profile/D105,$(1)) $(call Image/Build/Profile/DIR-300-B1,$(1)) $(call Image/Build/Profile/DIR-600-B1,$(1)) $(call Image/Build/Profile/DIR-300-B7,$(1)) $(call Image/Build/Profile/DIR-320-B1,$(1)) $(call Image/Build/Profile/DIR-600-B2,$(1)) $(call Image/Build/Profile/DIR610A1,$(1)) $(call Image/Build/Profile/DIR-615-D,$(1)) $(call Image/Build/Profile/DIR-620-A1,$(1)) $(call Image/Build/Profile/DIR-620-D1,$(1)) $(call Image/Build/Profile/DIR615H1,$(1)) $(call Image/Build/Profile/DAP1350,$(1)) $(call Image/Build/Profile/DAP1350WW,$(1)) $(call Image/Build/Profile/DCS930,$(1)) $(call Image/Build/Profile/DCS930LB1,$(1)) $(call Image/Build/Profile/ESR-9753,$(1)) $(call Image/Build/Profile/F7C027,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) $(call Image/Build/Profile/FREESTATION5,$(1)) # $(call Image/Build/Profile/HG255D,$(1)) $(call Image/Build/Profile/HLKRM04,$(1)) $(call Image/Build/Profile/HT-TM02,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) $(call Image/Build/Profile/IP2202,$(1)) $(call Image/Build/Profile/JHR-N805R,$(1)) $(call Image/Build/Profile/JHR-N825R,$(1)) $(call Image/Build/Profile/JHR-N926R,$(1)) $(call Image/Build/Profile/M2M,$(1)) $(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) $(call Image/Build/Profile/MR102N,$(1)) $(call Image/Build/Profile/MPRA1,$(1)) $(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1)) $(call Image/Build/Profile/MZKWDPR,$(1)) $(call Image/Build/Profile/NBG-419N,$(1)) $(call Image/Build/Profile/NCS601W,$(1)) $(call Image/Build/Profile/NW718,$(1)) $(call Image/Build/Profile/MINIEMBWIFI,$(1)) $(call Image/Build/Profile/MINIEMBPLUG,$(1)) $(call Image/Build/Profile/PSR-680W,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/PX-4885,$(1)) $(call Image/Build/Profile/RT5350F-OLINUXINO,$(1)) $(call Image/Build/Profile/RT5350F-OLINUXINO-EVB,$(1)) $(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/RTN10PLUS,$(1)) $(call Image/Build/Profile/RT-N13U,$(1)) $(call Image/Build/Profile/RUT5XX,$(1)) $(call Image/Build/Profile/SL-R7205,$(1)) $(call Image/Build/Profile/UR-326N4G,$(1)) $(call Image/Build/Profile/V22RW-2X2,$(1)) $(call Image/Build/Profile/VOCORE,$(1)) $(call Image/Build/Profile/W150M,$(1)) $(call Image/Build/Profile/W306R_V20,$(1)) $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WIZARD8800,$(1)) $(call Image/Build/Profile/WIZFI630A,$(1)) $(call Image/Build/Profile/WL-330N,$(1)) $(call Image/Build/Profile/WL-330N3G,$(1)) $(call Image/Build/Profile/WL-341V3,$(1)) $(call Image/Build/Profile/WL-351,$(1)) $(call Image/Build/Profile/WNCE2001,$(1)) $(call Image/Build/Profile/WR512-3GN,$(1)) $(call Image/Build/Profile/WR6202,$(1)) $(call Image/Build/Profile/WT1520,$(1)) $(call Image/Build/Profile/X5,$(1)) $(call Image/Build/Profile/X8,$(1)) $(call Image/Build/Profile/XDXRN502J,$(1)) $(call Image/Build/Profile/MZK-DP150N,$(1)) endef endif # # RT3662/RT3883 Profiles # # $(1) = squashfs/initramfs # $(2) = lowercase board name # $(3) = dts file # $(4) = kernel size # $(5) = rootfs size # $(6) = signature # $(7) = model # $(8) = flash address # $(9) = start address define BuildFirmware/EdimaxCombined/squashfs $(call PatchKernelLzmaDtb,$(2),$(3)) $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).bin.uImage) if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.uImage"` -gt `expr $(4) - 20` ]; then \ echo "Warning: $(KDIR)/vmlinux-$(2).bin.uImage is too big" >&2; \ exit 1; \ else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \ echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \ exit 1; \ else \ ( dd if=$(KDIR)/vmlinux-$(2).bin.uImage bs=`expr $(4) - 20` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.uImage.combined ; \ fi ; fi mkedimaximg -i "$(KDIR)/vmlinux-$(2).bin.uImage.combined" \ -o $(call imgname,$(1),$(2)).bin \ -s $(6) -m $(7) -f $(8) -S $(9) endef Image/Build/Profile/CYSWR1100=$(call BuildFirmware/Seama/$(1),$(1),cy-swr1100,CY-SWR1100,wrgnd10_samsung_ss815,$(ralink_default_fw_size_8M)) Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645,$(ralink_default_fw_size_8M)) hpm_mtd_size=16449536 Image/Build/Profile/HPM=$(call BuildFirmware/CustomFlash/$(1),$(1),hpm,HPM,$(hpm_mtd_size)) define BuildFirmware/RTN56U/squashfs $(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RT-N56U) -mkrtn56uimg -s $(call sysupname,$(1),rt-n56u) -cp $(call sysupname,$(1),rt-n56u) $(call imgname,$(1),rt-n56u)-factory.bin -mkrtn56uimg -f $(call imgname,$(1),rt-n56u)-factory.bin endef Image/Build/Profile/RTN56U=$(call BuildFirmware/RTN56U/$(1),$(1),rt-n56u,RT-N56U) Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910) Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920) kernel_size_BR6475ND:=2097152 rootfs_size_BR6475ND:=5832704 Image/Build/Profile/BR6475ND=$(call BuildFirmware/EdimaxCombined/$(1),$(1),br-6475nd,BR-6475ND,$(kernel_size_BR6475ND),$(rootfs_size_BR6475ND),CSYS,RN54,0x70000,0x01100000) ifeq ($(SUBTARGET),rt3883) define Image/Build/Profile/Default $(call Image/Build/Profile/CYSWR1100,$(1)) $(call Image/Build/Profile/DIR645,$(1)) $(call Image/Build/Profile/HPM,$(1)) $(call Image/Build/Profile/RTN56U,$(1)) $(call Image/Build/Profile/BR6475ND,$(1)) $(call Image/Build/Profile/TEW691GR,$(1)) $(call Image/Build/Profile/TEW692GR,$(1)) endef endif # # MT7620A Profiles # # $(1): (ignored) # $(2): lowercase board name # $(3): uppercase board name (must match DTS filename w/o extension) # $(4): erase block size # $(5): hardware id for mkdniimg # $(6): maximum image size define BuildFirmware/Netgear/squashfs $(call PatchKernelLzmaDtb,$(2),$(3)) # Pad kernel to eraseblock boundary, minus 2 uImage headers (=128 bytes): # bs = (eraseblock * (1 + (128 + kernelsize)/eraseblock)) - 128 dd if=$(KDIR)/vmlinux-$(2).bin.lzma \ of=$(KDIR)/vmlinux-$(2).bin.lzma.tmp \ bs=`expr \( $(4) \* \( 1 + \( 128 + \`wc -c < $(KDIR)/vmlinux-$(2).bin.lzma\` \) / $(4) \) \) - 128` \ count=1 conv=sync $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.tmp,$(KDIR)/vmlinux-$(2).uImage) cat ex2700-fakeroot.uImage >> $(KDIR)/vmlinux-$(2).uImage $(call MkImageSysupgrade/squashfs,squashfs,$(2),$(6)) $(STAGING_DIR_HOST)/bin/mkdniimg \ -B $(3) -H $(5) -v OpenWrt \ -i $(call imgname,squashfs,$(2))-sysupgrade.bin \ -o $(call imgname,squashfs,$(2))-factory.bin endef Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326) ex2700_mtd_size=3866624 Image/Build/Profile/EX2700=$(call BuildFirmware/Netgear/$(1),$(1),ex2700,EX2700,65536,29764623+4+0+32+2x2+0,$(ex2700_mtd_size)) Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a) Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e) Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530) Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG) br100_mtd_size=8126464 Image/Build/Profile/AI-BR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AI-BR100,$(br100_mtd_size),Ai-BR) Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp-n53,RP-N53) whr_300hp2_mtd_size=7012352 Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size)) whr_1166d_mtd_size=15400960 Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166d_mtd_size)) dlink810l_mtd_size=6881280 Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N) Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size)) na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661) Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761) Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861) Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001) Image/Build/Profile/PSG1208=$(call BuildFirmware/Default8M/$(1),$(1),psg1208,PSG1208) Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1) Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),y1s,Y1S) Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221) Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2) Image/Build/Profile/WMR-300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR-300) Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI) Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A) Image/Build/Profile/GL-MT300N=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300n,GL-MT300N) Image/Build/Profile/GL-MT750=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt750,GL-MT750) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) Image/Build/Profile/ZBT-WE826=$(call BuildFirmware/Default16M/$(1),$(1),zbt-we826,ZBT-WE826) Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) microwrt_mtd_size=16515072 Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size)) Image/Build/Profile/TINY-AC=$(call BuildFirmware/Default8M/$(1),$(1),tiny-ac,TINY-AC) ifeq ($(SUBTARGET),mt7620) define Image/Build/Profile/Default $(call Image/Build/Profile/E1700,$(1)) $(call Image/Build/Profile/EX2700,$(1)) $(call Image/Build/Profile/MT7620a,$(1)) $(call Image/Build/Profile/MT7620a_MT7610e,$(1)) $(call Image/Build/Profile/MT7620a_MT7530,$(1)) $(call Image/Build/Profile/MT7620a_V22SG,$(1)) $(call Image/Build/Profile/AI-BR100,$(1)) $(call Image/Build/Profile/CF-WR800N,$(1)) $(call Image/Build/Profile/RP-N53,$(1)) $(call Image/Build/Profile/DIR-810L,$(1)) $(call Image/Build/Profile/WHR300HP2,$(1)) $(call Image/Build/Profile/WHR600D,$(1)) $(call Image/Build/Profile/WHR1166D,$(1)) $(call Image/Build/Profile/DB-WRT01,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) $(call Image/Build/Profile/NA930,$(1)) $(call Image/Build/Profile/HC5661,$(1)) $(call Image/Build/Profile/HC5761,$(1)) $(call Image/Build/Profile/HC5861,$(1)) $(call Image/Build/Profile/OY-0001,$(1)) $(call Image/Build/Profile/PSG1208,$(1)) $(call Image/Build/Profile/Y1,$(1)) $(call Image/Build/Profile/Y1S,$(1)) $(call Image/Build/Profile/MLW221,$(1)) $(call Image/Build/Profile/MLWG2,$(1)) $(call Image/Build/Profile/WMR-300,$(1)) $(call Image/Build/Profile/RT-N14U,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/WT3020,$(1)) $(call Image/Build/Profile/MIWIFI-MINI,$(1)) $(call Image/Build/Profile/GL-MT300A,$(1)) $(call Image/Build/Profile/GL-MT300N,$(1)) $(call Image/Build/Profile/GL-MT750,$(1)) $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/YOUKU-YK1,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) $(call Image/Build/Profile/ZBT-WE826,$(1)) $(call Image/Build/Profile/ZBT-WR8305RT,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) $(call Image/Build/Profile/MicroWRT,$(1)) $(call Image/Build/Profile/TINY-AC,$(1)) endef endif # # MT7621 Profiles # ifeq ($(SUBTARGET),mt7621) TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626 endif define Device/mt7621 DTS := MT7621 IMAGE_SIZE := $(ralink_default_fw_size_4M) endef define Device/wsr-600 DTS := WSR-600 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/re6500 DTS := RE6500 endef define Device/wsr-1166 DTS := WSR-1166 IMAGE/sysupgrade.bin := trx | pad-rootfs IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/dir-860l-b1 DTS := DIR-860L-B1 IMAGES += factory.bin KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma IMAGE/sysupgrade.bin := \ append-kernel | pad-offset 65536 64 | append-rootfs | \ seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \ pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := \ append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \ seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \ seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \ check-size $$$$(IMAGE_SIZE) endef define Device/firewrt DTS := FIREWRT IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/pbr-m1 DTS := PBR-M1 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/sap-g3200u3 DTS := SAP-G3200U3 endef define Device/witi DTS := WITI IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/zbt-wg2626 DTS := ZBT-WG2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef define Device/wf-2881 DTS := WF-2881 BLOCKSIZE := 128KiB PAGESIZE := 2048 FILESYSTEMS := squashfs IMAGE_SIZE := 132382720 KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size $$$$(IMAGE_SIZE) endef define Device/ubnt-erx DTS := UBNT-ERX FILESYSTEMS := squashfs KERNEL_SIZE := 3145728 KERNEL := $(KERNEL_DTB) | uImage lzma IMAGES := sysupgrade.tar $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),factory-initramfs.tar) IMAGE/factory-initramfs.tar := ubnt-erx-factory-compat | \ ubnt-erx-factory-kernel | \ ubnt-erx-factory-rootfs | \ ubnt-erx-factory-version | \ ubnt-erx-factory-check-size $$(KERNEL_SIZE) IMAGE/sysupgrade.tar := sysupgrade-nand endef # # MT7628 Profiles # Image/Build/Profile/MIWIFI-NANO=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-nano,MIWIFI-NANO) Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628) Image/Build/Profile/WRTNODE2P=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode2p,WRTNODE2P) ifeq ($(SUBTARGET),mt7628) define Image/Build/Profile/Default $(call Image/Build/Profile/MIWIFI-NANO,$(1)) $(call Image/Build/Profile/MT7628,$(1)) $(call Image/Build/Profile/WRTNODE2P,$(1)) endef define Image/Build/Profile/MiwifiNano $(call Image/Build/Profile/MIWIFI-NANO,$(1)) endef endif # # MT7688 Profiles # Image/Build/Profile/LinkIt7688=$(call BuildFirmware/Default32M/$(1),$(1),LinkIt7688,LINKIT7688) Image/Build/Profile/WRTNODE2R=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode2r,WRTNODE2R) ifeq ($(SUBTARGET),mt7688) define Image/Build/Profile/Default $(call Image/Build/Profile/LinkIt7688,$(1)) $(call Image/Build/Profile/WRTNODE2R,$(1)) endef endif ifndef TARGET_DEVICES # # Generic Targets - only needed for legacy image building code # define Image/BuildKernel cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma) cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin endef define Image/BuildKernel/Initramfs cp $(KDIR)/vmlinux-initramfs.elf $(BIN_DIR)/$(VMLINUX)-initramfs.elf cp $(KDIR)/vmlinux-initramfs $(BIN_DIR)/$(VMLINUX)-initramfs.bin $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) $(call MkImage,lzma,$(KDIR)/vmlinux-initramfs.bin.lzma,$(KDIR)/uImage-initramfs.lzma) cp $(KDIR)/uImage-initramfs.lzma $(BIN_DIR)/$(UIMAGE)-initramfs.bin $(call Image/Build/Initramfs) endef define Image/Build $(call Image/Build/$(1)) dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync $(call Image/Build/Profile/$(PROFILE),$(1)) endef endif ifeq ($(SUBTARGET),mt7621) define Image/Prepare #define Build/Compile rm -rf $(KDIR)/relocate $(CP) ../../generic/image/relocate $(KDIR) $(MAKE) -C $(KDIR)/relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS) $(CP) $(KDIR)/relocate/loader.bin $(KDIR)/loader.bin endef endif $(eval $(call BuildImage))