ar71xx: add support for YunCore AP90Q

[openwrt/staging/yousong.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 2a1138c443432b9618e8e0e42de4830c47805649..c348b4fbda7045177d28e0c12503d4606abb5269 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -57,6 +57,17 @@ ap147-010)
        ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
        ;;
+ap90q|\
+dr531)
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+
+       case "$board" in
+       ap90q)
+               ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+               ;;
+       esac
+       ;;
 bhr-4grv2)
        ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
        ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@@ -115,6 +126,21 @@ cf-e316n-v2)
        ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
        ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
        ;;
+cf-e320n-v2)
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
+       ;;
+cf-e380ac-v1|\
+cf-e380ac-v2)
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt"
+       ;;
+cf-e520n|\
+cf-e530n)
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
+       ;;
 cpe210|\
 cpe510)
        ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
@@ -137,10 +163,6 @@ cr5000)
        ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
        ;;
-dr531)
-       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
-       ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
-       ;;
 dragino2)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
        ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"