+config ATH79_MACH_A60
+ bool "OpenMesh A40/A60 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+
config ATH79_MACH_ALFA_AP120C
bool "ALFA Network AP120C board support"
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_SC1750
+ bool "Abicom SC1750 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_SC300M
+ bool "Abicom SC300M board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_SC450
+ bool "Abicom SC450 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ALL0258N
bool "Allnet ALL0258N support"
select SOC_AR724X
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Arduino Yun.
-
-config ATH79_MACH_AP113
- bool "Atheros AP113 board support"
- select SOC_AR724X
- select ATH79_DEV_M25P80
- select ATH79_DEV_PB9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_USB
- select ATH79_DEV_ETH
config ATH79_MACH_AP132
bool "Atheros AP132 reference board"
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP132 reference boards.
config ATH79_MACH_AP143
bool "Atheros AP143 reference board"
select ATH79_DEV_WMAC
select ATH79_DEV_ETH
select ATH79_DEV_M25P80
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP143 reference board.
config ATH79_MACH_AP147
bool "Atheros AP147 reference board"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
select ATH79_DEV_AP9X_PCI if PCI
- help
- Say 'Y' here if you want your kernel to support the
- QCA AP147 reference boards.
config ATH79_MACH_AP152
bool "Atheros AP152 reference board"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
select ATH79_DEV_AP9X_PCI if PCI
- help
- Say 'Y' here if you want your kernel to support the
- QCA AP152 reference boards.
-
-config ATH79_MACH_AP83
- bool "Atheros AP83 board support"
- select SOC_AR913X
+config ATH79_MACH_AP90Q
+ bool "YunCore AP90Q support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_USB
+ select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_AP96
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_M25P80
-config ATH79_MACH_PB92
- bool "Atheros PB92 board support"
- select SOC_AR724X
+config ATH79_MACH_C55
+ bool "AirTight Networks C-55 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_PB9X_PCI if PCI
- select ATH79_DEV_USB
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
-config ATH79_MACH_C55
- bool "AirTight Networks C-55 support"
+config ATH79_MACH_C60
+ bool "AirTight Networks C-60 support"
select SOC_AR934X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
config ATH79_MACH_AW_NR580
bool "AzureWave AW-NR580 board support"
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_PQI_AIR_PEN
+ bool "PQI Air Pen"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
config ATH79_MACH_SOM9331
bool "SOM9331 support"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_SR3200
+ bool "YunCore SR3200 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_BHR_4GRV2
+ bool "Buffalo BHR-4GRV2 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
config ATH79_MACH_WHR_HP_G300N
bool "Buffalo WHR-HP-G300N board support"
select SOC_AR724X
select ATH79_DEV_WMAC
config ATH79_MACH_WPJ531
- bool "Compex WPJ531 board support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
+ bool "Compex WPJ531 board support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
config ATH79_MACH_WPJ558
bool "Compex WPJ558 board support"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_XD3200
+ bool "YunCore XD3200 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_DGL_5500_A1
bool "D-Link DGL-5500 A1 support"
select SOC_QCA955X
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
- select ATH79_NVRAM
config ATH79_MACH_DIR_600_A1
bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
- select ATH79_NVRAM
config ATH79_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_DIR_869_A1
+ bool "D-Link DIR-869 rev. A1"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
config ATH79_MACH_DLAN_HOTSPOT
bool "devolo dLAN Hotspot support"
select SOC_AR933X
select ATH79_DEV_NFC
select ATH79_DEV_USB
+config ATH79_MACH_DOMYWIFI_DW33D
+ bool "DomyWifi DW33D support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+
config ATH79_MACH_DR344
bool "Wallys DR344 board support"
select SOC_AS934X
select ATH79_DEV_ETH
select ATH79_DEV_USB
+config ATH79_MACH_E2100L
+ bool "Linksys E2100L board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
config ATH79_MACH_ESR900
bool "EnGenius ESR900 board support"
select SOC_QCA955X
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+ select ATH79_NVRAM
config ATH79_MACH_EW_DORIN
bool "embedded wireless Dorin Platform support"
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_WMAC
select ATH79_DEV_ETH
- help
- Say 'Y' here if you want your kernel to support the
- Dorin Platform from www.80211.de .
config ATH79_MACH_EL_M150
bool "EasyLink EL-M150 support"
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_GL_MIFI
+ bool "GL MIFI support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_GL_INET
bool "GL-INET support"
select SOC_AR933X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_EAP120
+ bool "TP-LINK EAP120 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_EAP300V2
bool "EnGenius EAP300 v2 support"
select SOC_AR934X
select ATH79_DEV_WMAC
config ATH79_MACH_GS_OOLITE
- bool "GS Oolite V1 support"
- select SOC_AR933X
- select ARH79_DEV_ETH
- select ARH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
+ bool "GS Oolite V1 support"
+ select SOC_AR933X
+ select ARH79_DEV_ETH
+ select ARH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
config ATH79_MACH_HIWIFI_HC6361
bool "HiWiFi HC6361 board support"
select RLE_DECOMPRESS
config ATH79_MACH_RB95X
- bool "MikroTik RouterBOARD 95X support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
- select ATH79_ROUTERBOOT
+ bool "MikroTik RouterBOARD 95X support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_NFC
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
config ATH79_MACH_RB2011
bool "MikroTik RouterBOARD 2011 support"
select ATH79_DEV_WMAC
select ATH79_ROUTERBOOT
+config ATH79_MACH_RBSPI
+ bool "MikroTik RouterBOARD SPI-NOR support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+ help
+ Say 'Y' here if you want your kernel to support the
+ MikroTik RouterBOARD mAP lite
+ MikroTik RouterBOARD hAP lite
+ MikroTik RouterBOARD hAP
+ MikroTik RouterBOARD hEX PoE lite
+ MikroTik RouterBOARD hEX lite
+ MikroTik RouterBOARD cAP (EXPERIMENTAL)
+ MikroTik RouterBOARD mAP (EXPERIMENTAL)
+ MikroTik RouterBOARD wAP (EXPERIMENTAL)
+
config ATH79_MACH_RBSXTLITE
bool "MikroTik RouterBOARD SXT Lite"
select SOC_AR934X
bool "OpenMesh OM2P board support"
select SOC_AR724X
select SOC_AR933X
+ select SOC_QCA953X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_RE450
+ bool "TP-LINK RE450 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_RW2458N
bool "Redwave RW2458N board support"
select SOC_AR724X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C59_V1
+ bool "TP-LINK Archer C59 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+ bool "TP-LINK Archer C60 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_CPE830
+ bool "YunCore CPE830 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CPE870
+ bool "YunCore CPE870 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_MR11U
bool "TP-LINK TL-MR11U/TL-MR3040 support"
select SOC_AR933X
select ATH79_DEV_WMAC
config ATH79_MACH_TL_WA7210N_V2
- bool "TP-LINK TL-WA7210N v2 support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
+ bool "TP-LINK TL-WA7210N v2 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WA801ND_V3
- bool "TP-LINK TL-WA801ND v3 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
+ bool "TP-LINK TL-WA801ND v3 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WA830RE_V2
bool "TP-LINK TL-WA830RE v2 support"
select SOC_AR934X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WA850RE_V2
+ bool "TP-LINK TL-WA850RE v2 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WA901ND
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
select SOC_AR724X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR802N_V1
+ bool "TP-LINK TL-WR802N v1 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
config ATH79_MACH_TL_WR810N
bool "TP-LINK TL-WR810N support"
select SOC_QCA953X
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR940N_V4
+ bool "TP-LINK TL-WR940N v4 support"
+ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR1041N_V2
bool "TP-LINK TL-WR1041N v2 support"
select SOC_AR934X
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR1043ND_V4
+ bool "TP-LINK TL-WR1043ND v4 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WR2543N
bool "TP-LINK TL-WR2543N/ND support"
select SOC_AR724X
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
- select ATH79_NVRAM
config ATH79_MACH_TEW_712BR
bool "TRENDnet TEW-712BR support"
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
- select ATH79_NVRAM
config ATH79_MACH_TEW_732BR
bool "TRENDnet TEW-732BR support"
select ATH79_DEV_WMAC
select ATH79_NVRAM
+config ATH79_MACH_Z1
+ bool "Meraki Z1 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select LEDS_NU801
+
+config ATH79_MACH_ZBT_WE1526
+ bool "Zbtlink ZBT-WE1526 board support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ZCN_1523H
bool "Zcomax ZCN-1523H support"
select SOC_AR724X
select ATH79_DEV_NFC
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+ select ATH79_NVRAM
config ATH79_MACH_CARAMBOLA2
bool "8devices Carambola2 board"
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E316N_V2
- bool "COMFAST CF-E316N v2 board"
+ bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_CF_E320N_V2
+ bool "COMFAST CF-E320N v2 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V1
+ bool "COMFAST CF-E380AC v1 support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V2
+ bool "COMFAST CF-E380AC v2 support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E520N
+ bool "COMFAST CF-E520N support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E530N
+ bool "COMFAST CF-E530N support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_BHU_BXU2000N2_A
bool "BHU BXU2000n-2 rev. A support"
select SOC_AR934X
select ATH79_DEV_WMAC
select ATH79_DEV_USB
select ATH79_NVRAM
+
+config ATH79_MACH_DAP_2695_A1
+ bool "D-Link DAP-2695 rev. A1 support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_TL_WPA8630
+ bool "TP-Link TL-WPA8630 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
projects / openwrt / staging / yousong.git / blobdiff