* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
* determined by the STATUS_CODE attribute.
-@@ -686,6 +688,15 @@ enum nl80211_commands {
+@@ -313,8 +315,8 @@
+ * channel for the specified amount of time. This can be used to do
+ * off-channel operations like transmit a Public Action frame and wait for
+ * a response while being associated to an AP on another channel.
+- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
++ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
++ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ * optionally used to specify additional channel parameters.
+ * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+@@ -385,6 +387,8 @@
+ * of any other interfaces, and other interfaces will again take
+ * precedence when they are used.
+ *
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -487,6 +491,7 @@ enum nl80211_commands {
+ NL80211_CMD_NOTIFY_CQM,
+
+ NL80211_CMD_SET_CHANNEL,
++ NL80211_CMD_SET_WDS_PEER,
+
+ /* add new commands above here */
+
+@@ -686,6 +691,15 @@ enum nl80211_commands {
* request, the driver will assume that the port is unauthorized until
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
-@@ -951,6 +962,9 @@ enum nl80211_attrs {
+@@ -787,6 +801,9 @@ enum nl80211_commands {
+ * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ * for non-automatic settings.
+ *
++ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
++ * means support for per-station GTKs.
++ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+@@ -951,6 +968,11 @@ enum nl80211_attrs {
NL80211_ATTR_RX_FRAME_TYPES,
NL80211_ATTR_FRAME_TYPE,
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
++
++ NL80211_ATTR_SUPPORT_IBSS_RSN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -1006,6 +1020,8 @@ enum nl80211_attrs {
+@@ -1006,6 +1028,8 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
-@@ -1022,6 +1038,8 @@ enum nl80211_iftype {
+@@ -1022,6 +1046,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_WDS,
NL80211_IFTYPE_MONITOR,
NL80211_IFTYPE_MESH_POINT,
/* keep last */
NUM_NL80211_IFTYPES,
-@@ -1382,6 +1400,7 @@ enum nl80211_reg_rule_flags {
+@@ -1111,6 +1137,8 @@ enum nl80211_rate_info {
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ * station)
++ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ */
+ enum nl80211_sta_info {
+ __NL80211_STA_INFO_INVALID,
+@@ -1124,6 +1152,8 @@ enum nl80211_sta_info {
+ NL80211_STA_INFO_TX_BITRATE,
+ NL80211_STA_INFO_RX_PACKETS,
+ NL80211_STA_INFO_TX_PACKETS,
++ NL80211_STA_INFO_TX_RETRIES,
++ NL80211_STA_INFO_TX_FAILED,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+@@ -1382,6 +1412,17 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
++ * spent on this channel
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
++ * channel was sensed busy (either due to activity or energy detect)
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
++ * channel was sensed busy
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
++ * receiving data
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
++ * transmitting data
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -1390,6 +1409,7 @@ enum nl80211_survey_info {
+@@ -1390,6 +1431,12 @@ enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
+ NL80211_SURVEY_INFO_IN_USE,
++ NL80211_SURVEY_INFO_CHANNEL_TIME,
++ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
++ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
++ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
++ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
+@@ -1636,11 +1683,14 @@ enum nl80211_auth_type {
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
++ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+ enum nl80211_key_type {
+ NL80211_KEYTYPE_GROUP,
+ NL80211_KEYTYPE_PAIRWISE,
+ NL80211_KEYTYPE_PEERKEY,
++
++ NUM_NL80211_KEYTYPES
+ };
+
+ /**
+@@ -1671,6 +1721,9 @@ enum nl80211_wpa_versions {
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
++ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
++ * specified the default depends on whether a MAC address was
++ * given with the command using the key or not (u32)
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+@@ -1682,6 +1735,7 @@ enum nl80211_key_attributes {
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
++ NL80211_KEY_TYPE,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
--- /dev/null
+--- a/survey.c
++++ b/survey.c
+@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
+ }
+
+ if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
+- printf("\tfrequency:\t%u MHz%s\n",
++ printf("\tfrequency:\t\t\t%u MHz%s\n",
+ nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
+ sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
+ if (sinfo[NL80211_SURVEY_INFO_NOISE])
+- printf("\tnoise:\t\t%d dBm\n",
++ printf("\tnoise:\t\t\t\t%d dBm\n",
+ (int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
++ printf("\tchannel active time:\t\t%lld ms\n",
++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
++ printf("\tchannel busy time:\t\t%lld ms\n",
++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
++ printf("\textension channel busy time:\t%lld ms\n",
++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
++ printf("\tchannel receive time:\t\t%lld ms\n",
++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
++ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
++ printf("\tchannel transmit time:\t\t%lld ms\n",
++ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
+ return NL_SKIP;
+ }
+
projects / openwrt / staging / yousong.git / commitdiff