+++ /dev/null
---- a/Embedded/src/GbE/gcu.h
-+++ b/Embedded/src/GbE/gcu.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
---- a/Embedded/src/GbE/gcu_if.c
-+++ b/Embedded/src/GbE/gcu_if.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -330,10 +330,17 @@ gcu_write_verify(uint32_t phy_num, uint3
- */
- void gcu_iegbe_resume(struct pci_dev *pdev)
- {
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
-+
- GCU_DBG("%s\n", __func__);
-
- pci_restore_state(pdev);
-- pci_enable_device(pdev);
-+ if(!pci_enable_device(pdev))
-+ GCU_DBG("pci_enable_device failed!\n",);
-
- return;
- }
-@@ -348,6 +355,12 @@ EXPORT_SYMBOL(gcu_iegbe_resume);
- */
- int gcu_iegbe_suspend(struct pci_dev *pdev, uint32_t state)
- {
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
-+
- GCU_DBG("%s\n", __func__);
-
- pci_save_state(pdev);
---- a/Embedded/src/GbE/gcu_if.h
-+++ b/Embedded/src/GbE/gcu_if.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
---- a/Embedded/src/GbE/gcu_main.c
-+++ b/Embedded/src/GbE/gcu_main.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -94,6 +94,7 @@ static struct pci_driver gcu_driver = {
-
- static struct gcu_adapter *global_adapter = 0;
- static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
-+static unsigned long g_intflags = 0;
-
- MODULE_AUTHOR("Intel(R) Corporation");
- MODULE_DESCRIPTION("Global Configuration Unit Driver");
-@@ -124,7 +125,7 @@ gcu_init_module(void)
-
- printk(KERN_INFO "%s\n", gcu_copyright);
-
-- ret = pci_module_init(&gcu_driver);
-+ ret = pci_register_driver(&gcu_driver);
- if(ret >= 0) {
- register_reboot_notifier(&gcu_notifier_reboot);
- }
-@@ -199,8 +200,6 @@ gcu_probe(struct pci_dev *pdev,
- return -ENOMEM;
- }
-
-- SET_MODULE_OWNER(adapter);
--
- pci_set_drvdata(pdev, adapter);
-
- adapter->pdev = pdev;
-@@ -238,7 +237,6 @@ gcu_probe(struct pci_dev *pdev,
- return 0;
- }
-
--
- /**
- * gcu_probe_err - gcu_probe error handler
- * @err: gcu_err_type
-@@ -295,7 +293,7 @@ gcu_notify_reboot(struct notifier_block
- case SYS_DOWN:
- case SYS_HALT:
- case SYS_POWER_OFF:
-- while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-+ while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
- if(pci_dev_driver(pdev) == &gcu_driver){
- gcu_suspend(pdev, 0x3);
- }
-@@ -318,6 +316,11 @@ static int
- gcu_suspend(struct pci_dev *pdev, uint32_t state)
- {
- /*struct gcu_adapter *adapter = pci_get_drvdata(pdev); */
-+#if ( ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,6) ) && \
-+ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) )
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct gcu_adapter *adapter = netdev_priv(netdev);
-+#endif
-
- GCU_DBG("%s\n", __func__);
-
-@@ -338,7 +341,6 @@ gcu_suspend(struct pci_dev *pdev, uint32
- return state;
- }
-
--
- /**
- * alloc_gcu_adapter
- *
-@@ -412,7 +414,7 @@ gcu_get_adapter(void)
- return NULL;
- }
-
-- spin_lock(&global_adapter_spinlock);
-+ spin_lock_irqsave(&global_adapter_spinlock, g_intflags);
-
- return global_adapter;
- }
-@@ -437,7 +439,7 @@ gcu_release_adapter(const struct gcu_ada
- *adapter = 0;
- }
-
-- spin_unlock(&global_adapter_spinlock);
-+ spin_unlock_irqrestore(&global_adapter_spinlock, g_intflags);
-
- return;
- }
---- a/Embedded/src/GbE/gcu_reg.h
-+++ b/Embedded/src/GbE/gcu_reg.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
---- a/Embedded/src/GbE/iegbe.7
-+++ b/Embedded/src/GbE/iegbe.7
-@@ -1,7 +1,7 @@
-
- .\" GPL LICENSE SUMMARY
- .\"
--.\" Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+.\" Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- .\"
- .\" This program is free software; you can redistribute it and/or modify
- .\" it under the terms of version 2 of the GNU General Public License as
-@@ -21,7 +21,7 @@
- .\" Contact Information:
- .\" Intel Corporation
- .\"
--.\" version: Embedded.L.1.0.34
-+.\" version: Embedded.Release.Patch.L.1.0.7-5
-
- .\" LICENSE
- .\"
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -132,22 +132,6 @@ static const struct iegbe_stats iegbe_gs
- { "cpp_master", E1000_STAT(icr_cpp_master) },
- { "stat", E1000_STAT(icr_stat) },
- #endif
--#ifdef IEGBE_GBE_WORKAROUND
-- { "txqec", E1000_STAT(stats.txqec) },
-- { "tx_next_to_clean", E1000_STAT(stats.tx_next_to_clean) },
-- { "tx_next_to_use", E1000_STAT(stats.tx_next_to_use) },
-- { "num_tx_queues", E1000_STAT(stats.num_tx_queues) },
--
-- { "num_rx_buf_alloc", E1000_STAT(stats.num_rx_buf_alloc) },
-- { "rx_next_to_clean", E1000_STAT(stats.rx_next_to_clean) },
-- { "rx_next_to_use", E1000_STAT(stats.rx_next_to_use) },
-- { "cc_gt_num_rx", E1000_STAT(stats.cc_gt_num_rx) },
-- { "tx_hnet", E1000_STAT(stats.tx_hnet) },
-- { "tx_hnentu", E1000_STAT(stats.tx_hnentu) },
-- { "RUC", E1000_STAT(stats.ruc) },
-- { "RFC", E1000_STAT(stats.rfc) },
--
--#endif
- };
- #define E1000_STATS_LEN \
- sizeof(iegbe_gstrings_stats) / sizeof(struct iegbe_stats)
-@@ -158,7 +142,7 @@ static const char iegbe_gstrings_test[][
- "Interrupt test (offline)", "Loopback test (offline)",
- "Link test (on/offline)"
- };
--#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / (ETH_GSTRING_LEN))
-+#define E1000_TEST_LEN (sizeof(iegbe_gstrings_test) / ETH_GSTRING_LEN)
- #endif /* ETHTOOL_TEST */
-
- #define E1000_REGS_LEN 0x20
-@@ -176,9 +160,7 @@ iegbe_get_settings(struct net_device *ne
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
--#ifndef IEGBE_10_100_ONLY
- SUPPORTED_1000baseT_Full|
--#endif
- SUPPORTED_Autoneg |
- SUPPORTED_TP);
-
-@@ -259,21 +241,13 @@ iegbe_set_settings(struct net_device *ne
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
--#ifndef IEGBE_10_100_ONLY
- ADVERTISED_1000baseT_Full|
--#endif
--
- ADVERTISED_Autoneg |
- ADVERTISED_TP;
- ecmd->advertising = hw->autoneg_advertised;
- }
-- } else {
-- uint16_t duplex;
--
-- // ethtool uses DUPLEX_FULL/DUPLEX_HALF
-- // the driver needs FULL_DUPLEX/HALF_DUPLEX
-- duplex = (ecmd->duplex == DUPLEX_FULL) ? FULL_DUPLEX : HALF_DUPLEX;
-- if(iegbe_set_spd_dplx(adapter, ecmd->speed + duplex))
-+ } else
-+ if(iegbe_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)){
- return -EINVAL;
- }
- /* reset the link */
-@@ -728,8 +702,8 @@ iegbe_set_ringparam(struct net_device *n
- struct iegbe_rx_ring *rxdr, *rx_old, *rx_new;
- int i, err, tx_ring_size, rx_ring_size;
-
-- tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
-- rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
-+ tx_ring_size = sizeof(struct iegbe_tx_ring) * adapter->num_tx_queues;
-+ rx_ring_size = sizeof(struct iegbe_rx_ring) * adapter->num_rx_queues;
-
- if (netif_running(adapter->netdev)){
- iegbe_down(adapter);
-@@ -768,10 +742,10 @@ iegbe_set_ringparam(struct net_device *n
- E1000_MAX_TXD : E1000_MAX_82544_TXD));
- E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
-
-- for (i = 0; i < adapter->num_queues; i++) {
-- txdr[i].count = txdr->count;
-- rxdr[i].count = rxdr->count;
-- }
-+ for (i = 0; i < adapter->num_tx_queues; i++)
-+ txdr[i].count = txdr->count;
-+ for (i = 0; i < adapter->num_rx_queues; i++)
-+ rxdr[i].count = rxdr->count;
-
- if(netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
-@@ -950,8 +924,7 @@ iegbe_eeprom_test(struct iegbe_adapter *
-
- static irqreturn_t
- iegbe_test_intr(int irq,
-- void *data,
-- struct pt_regs *regs)
-+ void *data)
- {
- struct net_device *netdev = (struct net_device *) data;
- struct iegbe_adapter *adapter = netdev_priv(netdev);
-@@ -973,7 +946,7 @@ iegbe_intr_test(struct iegbe_adapter *ad
- /* Hook up test interrupt handler just for this test */
- if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
- shared_int = FALSE;
-- } else if(request_irq(irq, &iegbe_test_intr, SA_SHIRQ,
-+ } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
- netdev->name, netdev)){
- *data = 1;
- return -1;
-@@ -1393,7 +1366,7 @@ iegbe_set_phy_loopback(struct iegbe_adap
- * attempt this 10 times.
- */
- while(iegbe_nonintegrated_phy_loopback(adapter) &&
-- count++ < 0xa) { };
-+ count++ < 0xa);
- if(count < 0xb) {
- return 0;
- }
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -1,7 +1,7 @@
- /*******************************************************************************
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -21,7 +21,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -127,9 +127,12 @@ struct iegbe_adapter;
- #define E1000_MIN_RXD 80
- #define E1000_MAX_82544_RXD 4096
-
-+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
- /* Supported Rx Buffer Sizes */
- #define E1000_RXBUFFER_128 128 /* Used for packet split */
- #define E1000_RXBUFFER_256 256 /* Used for packet split */
-+#define E1000_RXBUFFER_512 512
-+#define E1000_RXBUFFER_1024 1024
- #define E1000_RXBUFFER_2048 2048
- #define E1000_RXBUFFER_4096 4096
- #define E1000_RXBUFFER_8192 8192
-@@ -164,11 +167,9 @@ struct iegbe_adapter;
- #define E1000_MASTER_SLAVE iegbe_ms_hw_default
- #endif
-
--#ifdef NETIF_F_HW_VLAN_TX
--#define E1000_MNG_VLAN_NONE -1
--#endif
-+#define E1000_MNG_VLAN_NONE (-1)
- /* Number of packet split data buffers (not including the header buffer) */
--#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
-+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
-
- /* only works for sizes that are powers of 2 */
- #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
-@@ -206,6 +207,7 @@ struct iegbe_tx_ring {
- spinlock_t tx_lock;
- uint16_t tdh;
- uint16_t tdt;
-+ boolean_t last_tx_tso;
- uint64_t pkt;
- };
-
-@@ -228,6 +230,9 @@ struct iegbe_rx_ring {
- struct iegbe_ps_page *ps_page;
- struct iegbe_ps_page_dma *ps_page_dma;
-
-+ /* cpu for rx queue */
-+ int cpu;
-+
- uint16_t rdh;
- uint16_t rdt;
- uint64_t pkt;
-@@ -252,10 +257,8 @@ struct iegbe_adapter {
- struct timer_list tx_fifo_stall_timer;
- struct timer_list watchdog_timer;
- struct timer_list phy_info_timer;
--#ifdef NETIF_F_HW_VLAN_TX
- struct vlan_group *vlgrp;
- uint16_t mng_vlan_id;
--#endif
- uint32_t bd_number;
- uint32_t rx_buffer_len;
- uint32_t part_num;
-@@ -265,8 +268,18 @@ struct iegbe_adapter {
- uint16_t link_speed;
- uint16_t link_duplex;
- spinlock_t stats_lock;
-- atomic_t irq_sem;
-- struct work_struct tx_timeout_task;
-+ spinlock_t tx_queue_lock;
-+ unsigned int total_tx_bytes;
-+ unsigned int total_tx_packets;
-+ unsigned int total_rx_bytes;
-+ unsigned int total_rx_packets;
-+ /* Interrupt Throttle Rate */
-+ uint32_t itr;
-+ uint32_t itr_setting;
-+ uint16_t tx_itr;
-+ uint16_t rx_itr;
-+
-+ struct work_struct reset_task;
- uint8_t fc_autoneg;
-
- #ifdef ETHTOOL_PHYS_ID
-@@ -276,9 +289,8 @@ struct iegbe_adapter {
-
- /* TX */
- struct iegbe_tx_ring *tx_ring; /* One per active queue */
--#ifdef CONFIG_E1000_MQ
-- struct iegbe_tx_ring **cpu_tx_ring; /* per-cpu */
--#endif
-+ unsigned int restart_queue;
-+ unsigned long tx_queue_len;
- uint32_t txd_cmd;
- uint32_t tx_int_delay;
- uint32_t tx_abs_int_delay;
-@@ -286,46 +298,33 @@ struct iegbe_adapter {
- uint64_t gotcl_old;
- uint64_t tpt_old;
- uint64_t colc_old;
-+ uint32_t tx_timeout_count;
- uint32_t tx_fifo_head;
- uint32_t tx_head_addr;
- uint32_t tx_fifo_size;
-+ uint8_t tx_timeout_factor;
- atomic_t tx_fifo_stall;
- boolean_t pcix_82544;
- boolean_t detect_tx_hung;
-
- /* RX */
--#ifdef CONFIG_E1000_NAPI
-- boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
-+ bool (*clean_rx)(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int *work_done, int work_to_do);
--#else
-- boolean_t (*clean_rx) (struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
- void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring,
-- int cleaned_count);
--#else
-- void (*alloc_rx_buf) (struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--#endif
--
-+ struct iegbe_rx_ring *rx_ring,
-+ int cleaned_count);
- struct iegbe_rx_ring *rx_ring; /* One per active queue */
--#ifdef CONFIG_E1000_NAPI
-+ struct napi_struct napi;
- struct net_device *polling_netdev; /* One per active queue */
--#endif
--#ifdef CONFIG_E1000_MQ
-- struct net_device **cpu_netdev; /* per-cpu */
-- struct call_async_data_struct rx_sched_call_data;
-- int cpu_for_queue[4];
--#endif
-- int num_queues;
-+
-+ int num_tx_queues;
-+ int num_rx_queues;
-
- uint64_t hw_csum_err;
- uint64_t hw_csum_good;
- uint64_t rx_hdr_split;
-+ uint32_t alloc_rx_buff_failed;
- uint32_t rx_int_delay;
- uint32_t rx_abs_int_delay;
- boolean_t rx_csum;
-@@ -334,8 +333,6 @@ struct iegbe_adapter {
- uint64_t gorcl_old;
- uint16_t rx_ps_bsize0;
-
-- /* Interrupt Throttle Rate */
-- uint32_t itr;
-
- /* OS defined structs */
- struct net_device *netdev;
-@@ -378,7 +375,21 @@ struct iegbe_adapter {
- #ifdef CONFIG_PCI_MSI
- boolean_t have_msi;
- #endif
--#define IEGBE_INTD_DISABLE 0x0400
-+ /* to not mess up cache alignment, always add to the bottom */
-+ boolean_t tso_force;
-+ boolean_t smart_power_down; /* phy smart power down */
-+ boolean_t quad_port_a;
-+ unsigned long flags;
-+ uint32_t eeprom_wol;
-+ int bars;
-+ int need_ioport;
- };
-+
-+enum iegbe_state_t {
-+ __E1000_TESTING,
-+ __E1000_RESETTING,
-+ __E1000_DOWN
-+};
-+#define IEGBE_INTD_DISABLE 0x0400
- #endif /* _IEGBE_H_ */
-
---- a/Embedded/src/GbE/iegbe_hw.c
-+++ b/Embedded/src/GbE/iegbe_hw.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -2115,7 +2115,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
-
- ret_val = iegbe_oem_set_trans_gasket(hw);
- if(ret_val){
-- return ret_val;
-+ return ret_val;
- }
- ret_val = iegbe_oem_phy_is_full_duplex(
- hw, (int *) &is_FullDuplex);
-@@ -2164,7 +2164,7 @@ iegbe_config_mac_to_phy(struct iegbe_hw
- }
- /* Write the configured values back to the Device Control Reg. */
- E1000_WRITE_REG(hw, CTRL, ctrl);
-- return E1000_SUCCESS;
-+ return ret_val;
- }
-
- /*****************************************************************************
-@@ -2684,7 +2684,7 @@ iegbe_check_for_link(struct iegbe_hw *hw
-
- if(hw->autoneg_failed == 0) {
- hw->autoneg_failed = 1;
-- return 0;
-+ return E1000_SUCCESS;
- }
- DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\r\n");
-
-@@ -5875,7 +5875,7 @@ iegbe_get_cable_length(struct iegbe_hw *
- max_agc = cur_agc;
- }
- }
--
-+
- /* This is to fix a Klockwork defect, that the array index might
- * be out of bounds. 113 is table size */
- if (cur_agc < 0x71){
---- a/Embedded/src/GbE/iegbe_hw.h
-+++ b/Embedded/src/GbE/iegbe_hw.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -299,7 +299,7 @@ void iegbe_set_media_type(struct iegbe_h
- /* Link Configuration */
- int32_t iegbe_setup_link(struct iegbe_hw *hw);
- int32_t iegbe_phy_setup_autoneg(struct iegbe_hw *hw);
--void iegbe_config_collision_dist(struct iegbe_hw *hw);
-+void iegbe_config_collision_dist(struct iegbe_hw *hw);
- int32_t iegbe_config_fc_after_link_up(struct iegbe_hw *hw);
- int32_t iegbe_check_for_link(struct iegbe_hw *hw);
- int32_t iegbe_get_speed_and_duplex(struct iegbe_hw *hw, uint16_t * speed, uint16_t * duplex);
-@@ -588,14 +588,6 @@ uint8_t iegbe_arc_subsystem_valid(struct
- * o LSC = Link Status Change
- */
-
--#ifdef IEGBE_GBE_WORKAROUND
--#define IMS_ENABLE_MASK ( \
-- E1000_IMS_RXT0 | \
-- E1000_IMS_TXQE | \
-- E1000_IMS_RXDMT0 | \
-- E1000_IMS_RXSEQ | \
-- E1000_IMS_LSC)
--#else
- #define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
-@@ -606,8 +598,7 @@ uint8_t iegbe_arc_subsystem_valid(struct
- E1000_ICR_PB | \
- E1000_ICR_CPP_TARGET | \
- E1000_ICR_CPP_MASTER | \
-- E1000_IMS_LSC)
--#endif
-+ E1000_ICR_LSC)
-
- /* Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor. We
-@@ -923,10 +914,15 @@ struct iegbe_ffvt_entry {
- #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
- #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
- #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
--// Register conflict, does not exist for ICP_xxxx hardware
--// #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
- #define E1000_CTRL_AUX 0x000E0 /* Aux Control -RW */
-+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
- #define E1000_RCTL 0x00100 /* RX Control - RW */
-+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
-+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
-+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
-+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
-+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
-+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
- #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
- #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
- #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
-@@ -1282,8 +1278,6 @@ struct iegbe_ffvt_entry {
- #define E1000_82542_FFMT E1000_FFMT
- #define E1000_82542_FFVT E1000_FFVT
- #define E1000_82542_HOST_IF E1000_HOST_IF
--// Register conflict with ICP_xxxx hardware, no IAM
--// #define E1000_82542_IAM E1000_IAM
- #define E1000_82542_EEMNGCTL E1000_EEMNGCTL
- #define E1000_82542_PSRCTL E1000_PSRCTL
- #define E1000_82542_RAID E1000_RAID
-@@ -1329,6 +1323,7 @@ struct iegbe_hw_stats {
- uint64_t algnerrc;
- uint64_t symerrs;
- uint64_t rxerrc;
-+ uint64_t txerrc;
- uint64_t mpc;
- uint64_t scc;
- uint64_t ecol;
-@@ -1363,6 +1358,7 @@ struct iegbe_hw_stats {
- uint64_t ruc;
- uint64_t rfc;
- uint64_t roc;
-+ uint64_t rlerrc;
- uint64_t rjc;
- uint64_t mgprc;
- uint64_t mgpdc;
-@@ -1392,19 +1388,6 @@ struct iegbe_hw_stats {
- uint64_t ictxqmtc;
- uint64_t icrxdmtc;
- uint64_t icrxoc;
--#ifdef IEGBE_GBE_WORKAROUND
-- u64 txqec;
-- u64 tx_next_to_clean;
-- u64 tx_next_to_use;
-- u64 cc_gt_num_rx;
-- u64 tx_hnet;
-- u64 tx_hnentu;
-- u64 num_tx_queues;
--
-- u64 num_rx_buf_alloc;
-- u64 rx_next_to_clean;
-- u64 rx_next_to_use;
--#endif
- };
-
- /* Structure containing variables used by the shared code (iegbe_hw.c) */
-@@ -1484,6 +1467,7 @@ struct iegbe_hw {
- boolean_t ifs_params_forced;
- boolean_t in_ifs_mode;
- boolean_t mng_reg_access_disabled;
-+ boolean_t rx_needs_kicking;
- boolean_t icp_xxxx_is_link_up;
- };
-
-@@ -2358,17 +2342,23 @@ struct iegbe_host_command_info {
- #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
- #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
- #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
-+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
-+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
-
- /* PBA constants */
-+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
- #define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
- #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
-+#define E1000_PBA_20K 0x0014
- #define E1000_PBA_22K 0x0016
- #define E1000_PBA_24K 0x0018
- #define E1000_PBA_30K 0x001E
- #define E1000_PBA_32K 0x0020
-+#define E1000_PBA_34K 0x0022
- #define E1000_PBA_38K 0x0026
- #define E1000_PBA_40K 0x0028
- #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
-+#define E1000_PBS_16K E1000_PBA_16K
-
- /* Flow Control Constants */
- #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
-@@ -2899,7 +2889,7 @@ struct iegbe_host_command_info {
- #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
- #define M88E1011_I_REV_4 0x04
- #define M88E1111_I_PHY_ID 0x01410CC2
--#define M88E1141_E_PHY_ID 0x01410CD4
-+#define M88E1141_E_PHY_ID 0x01410CD0
- #define L1LXT971A_PHY_ID 0x001378E0
-
- /* Miscellaneous PHY bit definitions. */
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -42,103 +42,15 @@ GPL LICENSE SUMMARY
-
- #include "iegbe.h"
- #include "gcu_if.h"
--
--/* Change Log
-- * 6.0.58 4/20/05
-- * o iegbe_set_spd_dplx tests for compatible speed/duplex specification
-- * for fiber adapters
-- * 6.0.57 4/19/05
-- * o Added code to fix register test failure for devices >= 82571
-- *
-- * 6.0.52 3/15/05
-- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- * calls, one from mii_ioctl and other from within update_stats while
-- * processing MIIREG ioctl.
-- *
-- * 6.1.2 4/13/05
-- * o Fixed ethtool diagnostics
-- * o Enabled flow control to take default eeprom settings
-- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- * calls, one from mii_ioctl and other from within update_stats while processing
-- * MIIREG ioctl.
-- * 6.0.55 3/23/05
-- * o Support for MODULE_VERSION
-- * o Fix APM setting for 82544 based adapters
-- * 6.0.54 3/26/05
-- * o Added a timer to expire packets that were deferred for cleanup
-- * 6.0.52 3/15/05
-- * o Added stats_lock around iegbe_read_phy_reg commands to avoid concurrent
-- * calls, one from mii_ioctl and other from within update_stats while
-- * processing MIIREG ioctl.
-- * 6.0.47 3/2/05
-- * o Added enhanced functionality to the loopback diags to wrap the
-- * descriptor rings
-- * o Added manageability vlan filtering workaround.
-- *
-- * 6.0.44+ 2/15/05
-- * o Added code to handle raw packet based DHCP packets
-- * o Added code to fix the errata 10 buffer overflow issue
-- * o Sync up with WR01-05
-- * o applied Anton's patch to resolve tx hang in hardware
-- * o iegbe timeouts with early writeback patch
-- * o Removed Queensport IDs
-- * o fixed driver panic if MAC receives a bad large packets when packet
-- * split is enabled
-- * o Applied Andrew Mortons patch - iegbe stops working after resume
-- * 5.2.29 12/24/03
-- * o Bug fix: Endianess issue causing ethtool diags to fail on ppc.
-- * o Bug fix: Use pdev->irq instead of netdev->irq for MSI support.
-- * o Report driver message on user override of InterruptThrottleRate module
-- * parameter.
-- * o Bug fix: Change I/O address storage from uint32_t to unsigned long.
-- * o Feature: Added ethtool RINGPARAM support.
-- * o Feature: Added netpoll support.
-- * o Bug fix: Race between Tx queue and Tx clean fixed with a spin lock.
-- * o Bug fix: Allow 1000/Full setting for autoneg param for fiber connections.
-- * Jon D Mason [jonmason@us.ibm.com].
-- *
-- * 5.2.22 10/15/03
-- * o Bug fix: SERDES devices might be connected to a back-plane switch that
-- * doesn't support auto-neg, so add the capability to force 1000/Full.
-- * Also, since forcing 1000/Full, sample RxSynchronize bit to detect link
-- * state.
-- * o Bug fix: Flow control settings for hi/lo watermark didn't consider
-- * changes in the RX FIFO size, which could occur with Jumbo Frames or with
-- * the reduced FIFO in 82547.
-- * o Bug fix: Better propagation of error codes.
-- * [Janice Girouard (janiceg -a-t- us.ibm.com)]
-- * o Bug fix: hang under heavy Tx stress when running out of Tx descriptors;
-- * wasn't clearing context descriptor when backing out of send because of
-- * no-resource condition.
-- * o Bug fix: check netif_running in dev->poll so we don't have to hang in
-- * dev->close until all polls are finished. [Rober Olsson
-- * (robert.olsson@data.slu.se)].
-- * o Revert TxDescriptor ring size back to 256 since change to 1024 wasn't
-- * accepted into the kernel.
-- *
-- * 5.2.16 8/8/03
-- */
--
--#ifdef IEGBE_GBE_WORKAROUND
--#define IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS 1
--#endif
-+#include <linux/ipv6.h>
-+#include <net/ip6_checksum.h>
-
- char iegbe_driver_name[] = "iegbe";
- char iegbe_driver_string[] = "Gigabit Ethernet Controller Driver";
--#ifndef CONFIG_E1000_NAPI
--#define DRIVERNAPI
--#else
--#define DRIVERNAPI "-NAPI"
--#endif
--#define DRV_VERSION "0.8.0"DRIVERNAPI
-+#define DRV_VERSION "1.0.0-K28-NAPI"
- char iegbe_driver_version[] = DRV_VERSION;
--char iegbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
-+char iegbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
-
--#define E1000_FIFO_HDR 0x10
--#define E1000_82547_PAD_LEN 0x3E0
--#define MINIMUM_DHCP_PACKET_SIZE 282
--#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
--#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-
- /* iegbe_pci_tbl - PCI Device ID Table
- *
-@@ -148,95 +60,48 @@ char iegbe_copyright[] = "Copyright (c)
- * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
- */
- static struct pci_device_id iegbe_pci_tbl[] = {
--/* INTEL_E1000_ETHERNET_DEVICE(0x1000), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1001), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1004), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1008), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1009), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x100C), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x100D), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x100E), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x100F), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1010), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1011), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1012), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1013), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1014), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1015), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1016), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1017), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1018), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1019), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x101A), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x101D), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x101E), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1026), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1027), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1028), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x105E), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x105F), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1060), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1075), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1076), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1077), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1078), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x1079), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107A), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107B), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107C), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107D), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107E), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x107F), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x108A), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x108B), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x108C), */
--/* INTEL_E1000_ETHERNET_DEVICE(0x109A), */
-- INTEL_E1000_ETHERNET_DEVICE(0x5040),
-- INTEL_E1000_ETHERNET_DEVICE(0x5041),
-- INTEL_E1000_ETHERNET_DEVICE(0x5042),
-- INTEL_E1000_ETHERNET_DEVICE(0x5043),
-- INTEL_E1000_ETHERNET_DEVICE(0x5044),
-- INTEL_E1000_ETHERNET_DEVICE(0x5045),
-- INTEL_E1000_ETHERNET_DEVICE(0x5046),
-- INTEL_E1000_ETHERNET_DEVICE(0x5047),
-- INTEL_E1000_ETHERNET_DEVICE(0x5048),
-- INTEL_E1000_ETHERNET_DEVICE(0x5049),
-- INTEL_E1000_ETHERNET_DEVICE(0x504A),
-- INTEL_E1000_ETHERNET_DEVICE(0x504B),
-- /* required last entry */
-+ INTEL_E1000_ETHERNET_DEVICE(0x5040),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5041),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5042),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5043),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5044),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5045),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5046),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5047),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5048),
-+ INTEL_E1000_ETHERNET_DEVICE(0x5049),
-+ INTEL_E1000_ETHERNET_DEVICE(0x504A),
-+ INTEL_E1000_ETHERNET_DEVICE(0x504B),
-+ /* required last entry */
- {0,}
- };
-
- MODULE_DEVICE_TABLE(pci, iegbe_pci_tbl);
-
--DEFINE_SPINLOCK(print_lock);
-
- int iegbe_up(struct iegbe_adapter *adapter);
- void iegbe_down(struct iegbe_adapter *adapter);
-+void iegbe_reinit_locked(struct iegbe_adapter *adapter);
- void iegbe_reset(struct iegbe_adapter *adapter);
- int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx);
- int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter);
- int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter);
- void iegbe_free_all_tx_resources(struct iegbe_adapter *adapter);
- void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter);
--int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *txdr);
--int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rxdr);
--void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *tx_ring);
--void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring);
- void iegbe_update_stats(struct iegbe_adapter *adapter);
--
- static int iegbe_init_module(void);
- static void iegbe_exit_module(void);
- static int iegbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
- static void __devexit iegbe_remove(struct pci_dev *pdev);
- static int iegbe_alloc_queues(struct iegbe_adapter *adapter);
--#ifdef CONFIG_E1000_MQ
--static void iegbe_setup_queue_mapping(struct iegbe_adapter *adapter);
--#endif
- static int iegbe_sw_init(struct iegbe_adapter *adapter);
- static int iegbe_open(struct net_device *netdev);
- static int iegbe_close(struct net_device *netdev);
-@@ -249,7 +114,8 @@ static void iegbe_clean_tx_ring(struct i
- struct iegbe_tx_ring *tx_ring);
- static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring);
--static void iegbe_set_multi(struct net_device *netdev);
-+
-+static void iegbe_set_rx_mode(struct net_device *netdev);
- static void iegbe_update_phy_info(unsigned long data);
- static void iegbe_watchdog(unsigned long data);
- static void iegbe_82547_tx_fifo_stall(unsigned long data);
-@@ -257,66 +123,46 @@ static int iegbe_xmit_frame(struct sk_bu
- static struct net_device_stats * iegbe_get_stats(struct net_device *netdev);
- static int iegbe_change_mtu(struct net_device *netdev, int new_mtu);
- static int iegbe_set_mac(struct net_device *netdev, void *p);
--static irqreturn_t iegbe_intr(int irq, void *data, struct pt_regs *regs);
-+static irqreturn_t iegbe_intr(int irq, void *data);
-
--void iegbe_tasklet(unsigned long);
-+static irqreturn_t iegbe_intr_msi(int irq, void *data);
-
--#ifndef IEGBE_GBE_WORKAROUND
--static boolean_t iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *tx_ring);
--#endif
--
--#ifdef CONFIG_E1000_NAPI
--static int iegbe_clean(struct net_device *poll_dev, int *budget);
--static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-+static int iegbe_clean(struct napi_struct *napi, int budget);
-+static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int *work_done, int work_to_do);
--static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int *work_done, int work_to_do);
--#else
--static boolean_t iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--static boolean_t iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--#endif
-
--#ifdef IEGBE_GBE_WORKAROUND
-+
- static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int cleaned_count);
- static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int cleaned_count);
--#else
--static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring);
--#endif
-+
-
- static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
--#ifdef SIOCGMIIPHY
- static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
-- int cmd);
--#endif
-+ int cmd);
- void set_ethtool_ops(struct net_device *netdev);
- extern int ethtool_ioctl(struct ifreq *ifr);
- static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter);
- static void iegbe_leave_82542_rst(struct iegbe_adapter *adapter);
- static void iegbe_tx_timeout(struct net_device *dev);
--static void iegbe_tx_timeout_task(struct net_device *dev);
-+static void iegbe_reset_task(struct work_struct *work);
- static void iegbe_smartspeed(struct iegbe_adapter *adapter);
- static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
-- struct sk_buff *skb);
-+ struct sk_buff *skb);
-
--#ifdef NETIF_F_HW_VLAN_TX
--static void iegbe_vlan_rx_register(struct net_device *netdev,
-- struct vlan_group *grp);
-+static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
- static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
--#endif
-
- static int iegbe_notify_reboot(struct notifier_block *,
- unsigned long event,
-@@ -331,15 +177,17 @@ static int iegbe_resume(struct pci_dev *
- static void iegbe_netpoll (struct net_device *netdev);
- #endif
-
--#ifdef CONFIG_E1000_MQ
--/* for multiple Rx queues */
-+#define COPYBREAK_DEFAULT 256
-+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
-+module_param(copybreak, uint, 0644);
-+MODULE_PARM_DESC(copybreak,
-+ "Maximum size of packet that is copied to a new buffer on receive");
- void iegbe_rx_schedule(void *data);
--#endif
-
- struct notifier_block iegbe_notifier_reboot = {
-- .notifier_call = iegbe_notify_reboot,
-- .next = NULL,
-- .priority = 0
-+ .notifier_call = iegbe_notify_reboot,
-+ .next = NULL,
-+ .priority = 0
- };
-
- /* Exported from other modules */
-@@ -347,14 +195,14 @@ struct notifier_block iegbe_notifier_reb
- extern void iegbe_check_options(struct iegbe_adapter *adapter);
-
- static struct pci_driver iegbe_driver = {
-- .name = iegbe_driver_name,
-- .id_table = iegbe_pci_tbl,
-- .probe = iegbe_probe,
-- .remove = __devexit_p(iegbe_remove),
-- /* Power Managment Hooks */
-+ .name = iegbe_driver_name,
-+ .id_table = iegbe_pci_tbl,
-+ .probe = iegbe_probe,
-+ .remove = __devexit_p(iegbe_remove),
-+ /* Power Managment Hooks */
- #ifdef CONFIG_PM
-- .suspend = iegbe_suspend,
-- .resume = iegbe_resume
-+ .suspend = iegbe_suspend,
-+ .resume = iegbe_resume
- #endif
- };
-
-@@ -364,46 +212,17 @@ MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_VERSION);
-
- static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
--module_param(debug, int, 0);
-+module_param(debug, int, 0x0);
- MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-
--static uint8_t gcu_suspend = 0;
--static uint8_t gcu_resume = 0;
-+static uint8_t gcu_suspend = 0x0;
-+static uint8_t gcu_resume = 0x0;
- struct pci_dev *gcu = NULL;
-
--unsigned long tasklet_data;
--DECLARE_TASKLET(iegbe_reset_tasklet, iegbe_tasklet, (unsigned long) &tasklet_data);
-
- /**
- * iegbe_iegbe_tasklet -*
- **/
--void iegbe_tasklet(unsigned long data)
--{
-- char* err_msg = "TEST";
-- uint32_t *icr = (uint32_t*) data;
-- uint32_t gbe = *icr & 0x000000FF;
-- if( *icr & E1000_ICR_RX_DESC_FIFO_PAR) { /* 21 */
-- err_msg = "DMA Transmit Descriptor 2-bit ECC Error!";
-- }
-- if( *icr & E1000_ICR_TX_DESC_FIFO_PAR) { /* 20 */
-- err_msg = "DMA Receive Descriptor 2-bit ECC Error!";
-- }
-- if( *icr & E1000_ICR_PB) { /* 23 */
-- err_msg = "DMA Packet Buffer 2-bit ECC Error!";
-- }
-- if( *icr & E1000_ICR_CPP_TARGET) { /* 27 */
-- err_msg = "Statistic Register ECC Error!";
-- }
-- if( *icr & E1000_ICR_CPP_MASTER) {
-- err_msg = "CPP Error!";
-- }
-- spin_lock(&print_lock);
-- printk("IEGBE%d: System Reset due to: %s\n", gbe, err_msg);
-- dump_stack();
-- spin_unlock(&print_lock);
-- panic(err_msg);
-- return;
--}
- /**
- * iegbe_init_module - Driver Registration Routine
- *
-@@ -411,21 +230,24 @@ void iegbe_tasklet(unsigned long data)
- * loaded. All it does is register with the PCI subsystem.
- **/
-
--static int __init
--iegbe_init_module(void)
-+static int __init iegbe_init_module(void)
- {
-- int ret;
-+ int ret;
-
- printk(KERN_INFO "%s - version %s\n",
-- iegbe_driver_string, iegbe_driver_version);
-+ iegbe_driver_string, iegbe_driver_version);
-
-- printk(KERN_INFO "%s\n", iegbe_copyright);
-+ printk(KERN_INFO "%s\n", iegbe_copyright);
-
-- ret = pci_module_init(&iegbe_driver);
-- if(ret >= 0) {
-- register_reboot_notifier(&iegbe_notifier_reboot);
-- }
-- return ret;
-+ ret = pci_register_driver(&iegbe_driver);
-+ if (copybreak != COPYBREAK_DEFAULT) {
-+ if (copybreak == 0)
-+ printk(KERN_INFO "iegbe: copybreak disabled\n");
-+ else
-+ printk(KERN_INFO "iegbe: copybreak enabled for "
-+ "packets <= %u bytes\n", copybreak);
-+ }
-+ return ret;
- }
-
- module_init(iegbe_init_module);
-@@ -437,29 +259,51 @@ module_init(iegbe_init_module);
- * from memory.
- **/
-
--static void __exit
--iegbe_exit_module(void)
-+static void __exit iegbe_exit_module(void)
- {
--
-- unregister_reboot_notifier(&iegbe_notifier_reboot);
-- pci_unregister_driver(&iegbe_driver);
-+ pci_unregister_driver(&iegbe_driver);
- }
-
- module_exit(iegbe_exit_module);
-
-+static int iegbe_request_irq(struct iegbe_adapter *adapter)
-+{
-+ struct net_device *netdev = adapter->netdev;
-+ irq_handler_t handler = iegbe_intr;
-+ int irq_flags = IRQF_SHARED;
-+ int err;
-+ adapter->have_msi = !pci_enable_msi(adapter->pdev);
-+ if (adapter->have_msi) {
-+ handler = iegbe_intr_msi;
-+ irq_flags = 0;
-+ }
-+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-+ netdev);
-+ if (err) {
-+ if (adapter->have_msi)
-+ pci_disable_msi(adapter->pdev);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate interrupt Error: %d\n", err);
-+ }
-+ return err;
-+}
-+static void iegbe_free_irq(struct iegbe_adapter *adapter)
-+{
-+ struct net_device *netdev = adapter->netdev;
-+ free_irq(adapter->pdev->irq, netdev);
-+ if (adapter->have_msi)
-+ pci_disable_msi(adapter->pdev);
-+}
- /**
- * iegbe_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-
--static inline void
--iegbe_irq_disable(struct iegbe_adapter *adapter)
-+static void iegbe_irq_disable(struct iegbe_adapter *adapter)
- {
--
-- atomic_inc(&adapter->irq_sem);
-- E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-- E1000_WRITE_FLUSH(&adapter->hw);
-- synchronize_irq(adapter->pdev->irq);
-+ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-+ E1000_WRITE_FLUSH(&adapter->hw);
-+ synchronize_irq(adapter->pdev->irq);
- }
-
- /**
-@@ -470,244 +314,414 @@ iegbe_irq_disable(struct iegbe_adapter *
- static inline void
- iegbe_irq_enable(struct iegbe_adapter *adapter)
- {
--
-- if(likely(atomic_dec_and_test(&adapter->irq_sem))) {
-- E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
-- E1000_WRITE_FLUSH(&adapter->hw);
-- }
-+ E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
-+ E1000_WRITE_FLUSH(&adapter->hw);
- }
--#ifdef NETIF_F_HW_VLAN_TX
--void
--iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
--{
-- struct net_device *netdev = adapter->netdev;
-- uint16_t vid = adapter->hw.mng_cookie.vlan_id;
-- uint16_t old_vid = adapter->mng_vlan_id;
-
-- if(adapter->vlgrp) {
-- if(!adapter->vlgrp->vlan_devices[vid]) {
-- if(adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
-- iegbe_vlan_rx_add_vid(netdev, vid);
-- adapter->mng_vlan_id = vid;
-- } else {
-- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-- }
-- if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
-- (vid != old_vid) &&
-- !adapter->vlgrp->vlan_devices[old_vid]) {
-- iegbe_vlan_rx_kill_vid(netdev, old_vid);
-- }
-- }
--}
-+static void iegbe_update_mng_vlan(struct iegbe_adapter *adapter)
-+{
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ u16 vid = hw->mng_cookie.vlan_id;
-+ u16 old_vid = adapter->mng_vlan_id;
-+ if (adapter->vlgrp) {
-+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-+ if (hw->mng_cookie.status &
-+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
-+ iegbe_vlan_rx_add_vid(netdev, vid);
-+ adapter->mng_vlan_id = vid;
-+ } else
-+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+
-+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
-+ (vid != old_vid) &&
-+ !vlan_group_get_device(adapter->vlgrp, old_vid))
-+ iegbe_vlan_rx_kill_vid(netdev, old_vid);
-+ } else
-+ adapter->mng_vlan_id = vid;
-+ }
- }
--#endif
-
--int
--iegbe_up(struct iegbe_adapter *adapter)
-+/**
-+ * iegbe_configure - configure the hardware for RX and TX
-+ * @adapter = private board structure
-+ **/
-+static void iegbe_configure(struct iegbe_adapter *adapter)
- {
- struct net_device *netdev = adapter->netdev;
-- int i, err;
-- uint16_t pci_cmd;
--
-- /* hardware has been reset, we need to reload some things */
--
-- /* Reset the PHY if it was previously powered down */
-- if(adapter->hw.media_type == iegbe_media_type_copper
-- || (adapter->hw.media_type == iegbe_media_type_oem
-- && iegbe_oem_phy_is_copper(&adapter->hw))) {
-- uint16_t mii_reg;
-- iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-- if(mii_reg & MII_CR_POWER_DOWN){
-- iegbe_phy_reset(&adapter->hw);
-- }
-- }
-+ int i;
-
-- iegbe_set_multi(netdev);
-+ iegbe_set_rx_mode(netdev);
-
--#ifdef NETIF_F_HW_VLAN_TX
- iegbe_restore_vlan(adapter);
--#endif
-
- iegbe_configure_tx(adapter);
- iegbe_setup_rctl(adapter);
- iegbe_configure_rx(adapter);
-+ /* call E1000_DESC_UNUSED which always leaves
-+ * at least 1 descriptor unused to make sure
-+ * next_to_use != next_to_clean */
-+ for (i = 0; i < adapter->num_rx_queues; i++) {
-+ struct iegbe_rx_ring *ring = &adapter->rx_ring[i];
-+ adapter->alloc_rx_buf(adapter, ring,
-+ E1000_DESC_UNUSED(ring));
-+ }
-
--#ifdef IEGBE_GBE_WORKAROUND
-- for (i = 0; i < adapter->num_queues; i++)
-- adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i],
-- IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
--#else
-- for (i = 0; i < adapter->num_queues; i++)
-- adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
--#endif
-+ adapter->tx_queue_len = netdev->tx_queue_len;
-+}
-
--#ifdef CONFIG_PCI_MSI
-- if(adapter->hw.mac_type > iegbe_82547_rev_2
-- || adapter->hw.mac_type == iegbe_icp_xxxx) {
-- adapter->have_msi = TRUE;
-- if((err = pci_enable_msi(adapter->pdev))) {
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate MSI interrupt Error: %d\n", err);
-- adapter->have_msi = FALSE;
-- }
-- }
-- pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
-- pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd | IEGBE_INTD_DISABLE);
-+int iegbe_up(struct iegbe_adapter *adapter)
-+{
-+ /* hardware has been reset, we need to reload some things */
-+ iegbe_configure(adapter);
-
--#endif
-- if((err = request_irq(adapter->pdev->irq, &iegbe_intr,
-- SA_SHIRQ | SA_SAMPLE_RANDOM,
-- netdev->name, netdev))) {
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate interrupt Error: %d\n", err);
-- return err;
-- }
-+ clear_bit(__E1000_DOWN, &adapter->flags);
-
-- mod_timer(&adapter->watchdog_timer, jiffies);
-+ napi_enable(&adapter->napi);
-
--#ifdef CONFIG_E1000_NAPI
-- netif_poll_enable(netdev);
--#endif
- iegbe_irq_enable(adapter);
-
-+ adapter->hw.get_link_status = 0x1;
- return 0;
- }
-
--void
--iegbe_down(struct iegbe_adapter *adapter)
--{
-- struct net_device *netdev = adapter->netdev;
--
-- iegbe_irq_disable(adapter);
--#ifdef CONFIG_E1000_MQ
-- while (atomic_read(&adapter->rx_sched_call_data.count) != 0) { };
--#endif
-- free_irq(adapter->pdev->irq, netdev);
--#ifdef CONFIG_PCI_MSI
-- if((adapter->hw.mac_type > iegbe_82547_rev_2
-- || adapter->hw.mac_type == iegbe_icp_xxxx)
-- && adapter->have_msi == TRUE) {
-- pci_disable_msi(adapter->pdev);
-- }
--#endif
-- del_timer_sync(&adapter->tx_fifo_stall_timer);
-- del_timer_sync(&adapter->watchdog_timer);
-- del_timer_sync(&adapter->phy_info_timer);
-+/**
-+ * iegbe_power_up_phy - restore link in case the phy was powered down
-+ * @adapter: address of board private structure
-+ *
-+ * The phy may be powered down to save power and turn off link when the
-+ * driver is unloaded and wake on lan is not enabled (among others)
-+ * *** this routine MUST be followed by a call to iegbe_reset ***
-+ *
-+ **/
-
--#ifdef CONFIG_E1000_NAPI
-- netif_poll_disable(netdev);
--#endif
-- adapter->link_speed = 0;
-- adapter->link_duplex = 0;
-- netif_carrier_off(netdev);
-- netif_stop_queue(netdev);
-+void iegbe_power_up_phy(struct iegbe_adapter *adapter)
-+{
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u16 mii_reg = 0;
-
-- iegbe_reset(adapter);
-- iegbe_clean_all_tx_rings(adapter);
-- iegbe_clean_all_rx_rings(adapter);
-+ /* Just clear the power down bit to wake the phy back up */
-+ if (hw->media_type == iegbe_media_type_copper) {
-+ /* according to the manual, the phy will retain its
-+ * settings across a power-down/up cycle */
-+ iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
-+ mii_reg &= ~MII_CR_POWER_DOWN;
-+ iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
-+ }
-+}
-
-- /* If WoL is not enabled and management mode is not IAMT
-- * or if WoL is not enabled and OEM PHY is copper based,
-- * power down the PHY so no link is implied when interface is down */
-- if(!adapter->wol
-- && ((adapter->hw.mac_type >= iegbe_82540
-- && adapter->hw.media_type == iegbe_media_type_copper
-- && !iegbe_check_mng_mode(&adapter->hw)
-- && !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN))
-- || (adapter->hw.media_type == iegbe_media_type_oem
-- && iegbe_oem_phy_is_copper(&adapter->hw)))){
-+static void iegbe_power_down_phy(struct iegbe_adapter *adapter)
-+{
-+ struct iegbe_hw *hw = &adapter->hw;
-
-- uint16_t mii_reg;
-- iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-+ /* Power down the PHY so no link is implied when interface is down *
-+ * The PHY cannot be powered down if any of the following is true *
-+ * (a) WoL is enabled
-+ * (b) AMT is active
-+ * (c) SoL/IDER session is active */
-+ if (!adapter->wol && hw->mac_type >= iegbe_82540 &&
-+ hw->media_type == iegbe_media_type_copper) {
-+ u16 mii_reg = 0;
-+
-+ switch (hw->mac_type) {
-+ case iegbe_82540:
-+ case iegbe_82545:
-+ case iegbe_82545_rev_3:
-+ case iegbe_82546:
-+ case iegbe_82546_rev_3:
-+ case iegbe_82541:
-+ case iegbe_82541_rev_2:
-+ case iegbe_82547:
-+ case iegbe_82547_rev_2:
-+ if (E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)
-+ goto out;
-+ break;
-+ case iegbe_82571:
-+ case iegbe_82572:
-+ case iegbe_82573:
-+ if (iegbe_check_mng_mode(hw) ||
-+ iegbe_check_phy_reset_block(hw))
-+ goto out;
-+ break;
-+ default:
-+ goto out;
-+ }
-+ iegbe_read_phy_reg(hw, PHY_CTRL, &mii_reg);
- mii_reg |= MII_CR_POWER_DOWN;
-- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
-+ iegbe_write_phy_reg(hw, PHY_CTRL, mii_reg);
- mdelay(1);
- }
-+out:
-+ return;
- }
-
--void
--iegbe_reset(struct iegbe_adapter *adapter)
-+void iegbe_down(struct iegbe_adapter *adapter)
- {
-- struct net_device *netdev = adapter->netdev;
-- uint32_t pba, manc;
-- uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
-- uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
-+ struct net_device *netdev = adapter->netdev;
-
-+ /* signal that we're down so the interrupt handler does not
-+ * reschedule our watchdog timer */
-+ set_bit(__E1000_DOWN, &adapter->flags);
-
-- /* Repartition Pba for greater than 9k mtu
-- * To take effect CTRL.RST is required.
-- */
-+ napi_disable(&adapter->napi);
-
-- switch (adapter->hw.mac_type) {
-- case iegbe_82547:
-- case iegbe_82547_rev_2:
-- pba = E1000_PBA_30K;
-- break;
-- case iegbe_82571:
-- case iegbe_82572:
-- pba = E1000_PBA_38K;
-- break;
-- case iegbe_82573:
-- pba = E1000_PBA_12K;
-+ iegbe_irq_disable(adapter);
-+
-+ del_timer_sync(&adapter->tx_fifo_stall_timer);
-+ del_timer_sync(&adapter->watchdog_timer);
-+ del_timer_sync(&adapter->phy_info_timer);
-+
-+ netdev->tx_queue_len = adapter->tx_queue_len;
-+ adapter->link_speed = 0;
-+ adapter->link_duplex = 0;
-+ netif_carrier_off(netdev);
-+ netif_stop_queue(netdev);
-+
-+ iegbe_reset(adapter);
-+ iegbe_clean_all_tx_rings(adapter);
-+ iegbe_clean_all_rx_rings(adapter);
-+}
-+void iegbe_reinit_locked(struct iegbe_adapter *adapter)
-+{
-+ WARN_ON(in_interrupt());
-+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
-+ msleep(1);
-+ iegbe_down(adapter);
-+ iegbe_up(adapter);
-+ clear_bit(__E1000_RESETTING, &adapter->flags);
-+}
-+
-+void iegbe_reset(struct iegbe_adapter *adapter)
-+{
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
-+ u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
-+ bool legacy_pba_adjust = false;
-+
-+ /* Repartition Pba for greater than 9k mtu
-+ * To take effect CTRL.RST is required.
-+ */
-+
-+ switch (hw->mac_type) {
-+ case iegbe_82542_rev2_0:
-+ case iegbe_82542_rev2_1:
-+ case iegbe_82543:
-+ case iegbe_82544:
-+ case iegbe_82540:
-+ case iegbe_82541:
-+ case iegbe_82541_rev_2:
-+ case iegbe_icp_xxxx:
-+ legacy_pba_adjust = true;
-+ pba = E1000_PBA_48K;
- break;
-- default:
-+ case iegbe_82545:
-+ case iegbe_82545_rev_3:
-+ case iegbe_82546:
-+ case iegbe_82546_rev_3:
- pba = E1000_PBA_48K;
- break;
-- }
-+ case iegbe_82547:
-+ case iegbe_82573:
-+ case iegbe_82547_rev_2:
-+ legacy_pba_adjust = true;
-+ pba = E1000_PBA_30K;
-+ break;
-+ case iegbe_82571:
-+ case iegbe_82572:
-+ case iegbe_undefined:
-+ case iegbe_num_macs:
-+ break;
-+ }
-+
-+ if (legacy_pba_adjust) {
-+ if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
-+ pba -= 8; /* allocate more FIFO for Tx */
-+ /* send an XOFF when there is enough space in the
-+ * Rx FIFO to hold one extra full size Rx packet
-+ */
-
-- if((adapter->hw.mac_type != iegbe_82573) &&
-- (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) {
-- pba -= 0x8; /* allocate more FIFO for Tx */
-- /* send an XOFF when there is enough space in the
-- * Rx FIFO to hold one extra full size Rx packet
-- */
-- fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
-- ETHERNET_FCS_SIZE + 0x1;
-- fc_low_water_mark = fc_high_water_mark + 0x8;
-- }
-
-+ if (hw->mac_type == iegbe_82547) {
-+ adapter->tx_fifo_head = 0;
-+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
-+ adapter->tx_fifo_size =
-+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
-+ atomic_set(&adapter->tx_fifo_stall, 0);
-+ }
-+ } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
-+ E1000_WRITE_REG(&adapter->hw, PBA, pba);
-+
-+ /* To maintain wire speed transmits, the Tx FIFO should be
-+ * large enough to accomodate two full transmit packets,
-+ * rounded up to the next 1KB and expressed in KB. Likewise,
-+ * the Rx FIFO should be large enough to accomodate at least
-+ * one full receive packet and is similarly rounded up and
-+ * expressed in KB. */
-+ pba = E1000_READ_REG(&adapter->hw, PBA);
-+ /* upper 16 bits has Tx packet buffer allocation size in KB */
-+ tx_space = pba >> 16;
-+ /* lower 16 bits has Rx packet buffer allocation size in KB */
-+ pba &= 0xffff;
-+ /* don't include ethernet FCS because hardware appends/strips */
-+ min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
-+ VLAN_TAG_SIZE;
-+ min_tx_space = min_rx_space;
-+ min_tx_space *= 2;
-+ min_tx_space = ALIGN(min_tx_space, 1024);
-+ min_tx_space >>= 10;
-+ min_rx_space = ALIGN(min_rx_space, 1024);
-+ min_rx_space >>= 10;
-+
-+ /* If current Tx allocation is less than the min Tx FIFO size,
-+ * and the min Tx FIFO size is less than the current Rx FIFO
-+ * allocation, take space away from current Rx allocation */
-+ if (tx_space < min_tx_space &&
-+ ((min_tx_space - tx_space) < pba)) {
-+ pba = pba - (min_tx_space - tx_space);
-+
-+ /* PCI/PCIx hardware has PBA alignment constraints */
-+ switch (hw->mac_type) {
-+ case iegbe_82545 ... iegbe_82546_rev_3:
-+ pba &= ~(E1000_PBA_8K - 1);
-+ break;
-+ default:
-+ break;
-+ }
-
-- if(adapter->hw.mac_type == iegbe_82547) {
-- adapter->tx_fifo_head = 0;
-- adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
-- adapter->tx_fifo_size =
-- (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
-- atomic_set(&adapter->tx_fifo_stall, 0);
-+ /* if short on rx space, rx wins and must trump tx
-+ * adjustment or use Early Receive if available */
-+ if (pba < min_rx_space) {
-+ switch (hw->mac_type) {
-+ case iegbe_82573:
-+ /* ERT enabled in iegbe_configure_rx */
-+ break;
-+ default:
-+ pba = min_rx_space;
-+ break;
-+ }
-+ }
-+ }
- }
-
- E1000_WRITE_REG(&adapter->hw, PBA, pba);
-
- /* flow control settings */
-- adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
-- fc_high_water_mark;
-- adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
-- fc_low_water_mark;
-- adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
-- adapter->hw.fc_send_xon = 1;
-- adapter->hw.fc = adapter->hw.original_fc;
-+ /* Set the FC high water mark to 90% of the FIFO size.
-+ * Required to clear last 3 LSB */
-+ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
-+ /* We can't use 90% on small FIFOs because the remainder
-+ * would be less than 1 full frame. In this case, we size
-+ * it to allow at least a full frame above the high water
-+ * mark. */
-+ if (pba < E1000_PBA_16K)
-+ fc_high_water_mark = (pba * 1024) - 1600;
-+
-+ hw->fc_high_water = fc_high_water_mark;
-+ hw->fc_low_water = fc_high_water_mark - 8;
-+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
-+ hw->fc_send_xon = 1;
-+ hw->fc = hw->original_fc;
-
- /* Allow time for pending master requests to run */
-- iegbe_reset_hw(&adapter->hw);
-- if(adapter->hw.mac_type >= iegbe_82544){
-+ iegbe_reset_hw(hw);
-+ if (hw->mac_type >= iegbe_82544)
- E1000_WRITE_REG(&adapter->hw, WUC, 0);
-- }
-- if(iegbe_init_hw(&adapter->hw)) {
-+
-+ if (iegbe_init_hw(hw))
- DPRINTK(PROBE, ERR, "Hardware Error\n");
-- }
--#ifdef NETIF_F_HW_VLAN_TX
- iegbe_update_mng_vlan(adapter);
--#endif
-+
-+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
-+ if (hw->mac_type >= iegbe_82544 &&
-+ hw->mac_type <= iegbe_82547_rev_2 &&
-+ hw->autoneg == 1 &&
-+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
-+ u32 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+ /* clear phy power management bit if we are in gig only mode,
-+ * which if enabled will attempt negotiation to 100Mb, which
-+ * can cause a loss of link at power off or driver unload */
-+ ctrl &= ~E1000_CTRL_SWDPIN3;
-+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+ }
-+
- /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
- E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
-
-- iegbe_reset_adaptive(&adapter->hw);
-- iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
-- if(adapter->en_mng_pt) {
-- manc = E1000_READ_REG(&adapter->hw, MANC);
-- manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
-- E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+ iegbe_reset_adaptive(hw);
-+ iegbe_phy_get_info(hw, &adapter->phy_info);
-+
-+ if (!adapter->smart_power_down &&
-+ (hw->mac_type == iegbe_82571 ||
-+ hw->mac_type == iegbe_82572)) {
-+ u16 phy_data = 0;
-+ /* speed up time to link by disabling smart power down, ignore
-+ * the return value of this function because there is nothing
-+ * different we would do if it failed */
-+ iegbe_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-+ &phy_data);
-+ phy_data &= ~IGP02E1000_PM_SPD;
-+ iegbe_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-+ phy_data);
-+ }
-+
-+}
-+
-+/**
-+ * Dump the eeprom for users having checksum issues
-+ **/
-+static void iegbe_dump_eeprom(struct iegbe_adapter *adapter)
-+{
-+ struct net_device *netdev = adapter->netdev;
-+ struct ethtool_eeprom eeprom;
-+ const struct ethtool_ops *ops = netdev->ethtool_ops;
-+ u8 *data;
-+ int i;
-+ u16 csum_old, csum_new = 0;
-+
-+ eeprom.len = ops->get_eeprom_len(netdev);
-+ eeprom.offset = 0;
-+
-+ data = kmalloc(eeprom.len, GFP_KERNEL);
-+ if (!data) {
-+ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
-+ " data\n");
-+ return;
- }
-+
-+ ops->get_eeprom(netdev, &eeprom, data);
-+
-+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
-+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
-+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
-+ csum_new += data[i] + (data[i + 1] << 8);
-+ csum_new = EEPROM_SUM - csum_new;
-+
-+ printk(KERN_ERR "/*********************/\n");
-+ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
-+ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
-+
-+ printk(KERN_ERR "Offset Values\n");
-+ printk(KERN_ERR "======== ======\n");
-+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
-+
-+ printk(KERN_ERR "Include this output when contacting your support "
-+ "provider.\n");
-+ printk(KERN_ERR "This is not a software error! Something bad "
-+ "happened to your hardware or\n");
-+ printk(KERN_ERR "EEPROM image. Ignoring this "
-+ "problem could result in further problems,\n");
-+ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
-+ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
-+ "which is invalid\n");
-+ printk(KERN_ERR "and requires you to set the proper MAC "
-+ "address manually before continuing\n");
-+ printk(KERN_ERR "to enable this network device.\n");
-+ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
-+ "to your hardware vendor\n");
-+ printk(KERN_ERR "or Intel Customer Support.\n");
-+ printk(KERN_ERR "/*********************/\n");
-+
-+ kfree(data);
- }
-
- /**
-@@ -721,184 +735,166 @@ iegbe_reset(struct iegbe_adapter *adapte
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
--
--static int __devinit
--iegbe_probe(struct pci_dev *pdev,
-+static int __devinit iegbe_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
- {
-- struct net_device *netdev;
-- struct iegbe_adapter *adapter;
-- unsigned long mmio_start, mmio_len;
-- uint32_t ctrl_ext;
-- uint32_t swsm;
-+ struct net_device *netdev;
-+ struct iegbe_adapter *adapter;
-+ struct iegbe_hw *hw;
-
- static int cards_found = 0;
-+ int i, err, pci_using_dac;
-+ u16 eeprom_data = 0;
-+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
-+ int bars;
-+ DECLARE_MAC_BUF(mac);
-
-- int i, err, pci_using_dac;
-- uint16_t eeprom_data = 0;
-- uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
-+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
-+ err = pci_enable_device(pdev);
-
-+ if (err)
-+ return err;
-
-- if((err = pci_enable_device(pdev))) {
-- return err;
-- }
-- if(!(err = pci_set_dma_mask(pdev, PCI_DMA_64BIT))) {
-+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
-+ !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
- pci_using_dac = 1;
-- } else {
-- if((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
-- E1000_ERR("No usable DMA configuration, aborting\n");
-- return err;
-- }
-+ } else {
-+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-+ if (err) {
-+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-+ if (err) {
-+ E1000_ERR("No usable DMA configuration, "
-+ "aborting\n");
-+ goto err_dma;
-+ }
-+ }
- pci_using_dac = 0;
-- }
--
-- if((err = pci_request_regions(pdev, iegbe_driver_name))) {
-- return err;
- }
-- pci_set_master(pdev);
-
-- netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
-- if(!netdev) {
-- err = -ENOMEM;
-- goto err_alloc_etherdev;
-- }
-+ err = pci_request_selected_regions(pdev, bars, iegbe_driver_name);
-+ if (err)
-+ goto err_pci_reg;
-+
-+ pci_set_master(pdev);
-+
-+ err = -ENOMEM;
-+ netdev = alloc_etherdev(sizeof(struct iegbe_adapter));
-+ if (!netdev)
-+ goto err_alloc_etherdev;
-
-- SET_MODULE_OWNER(netdev);
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
-- pci_set_drvdata(pdev, netdev);
-- adapter = netdev_priv(netdev);
-- adapter->netdev = netdev;
-- adapter->pdev = pdev;
-- adapter->hw.back = adapter;
-- adapter->msg_enable = (0x1 << debug) - 0x1;
--
-- mmio_start = pci_resource_start(pdev, BAR_0);
-- mmio_len = pci_resource_len(pdev, BAR_0);
--
-- adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
-- if(!adapter->hw.hw_addr) {
-- err = -EIO;
-- goto err_ioremap;
-- }
--
-- for(i = BAR_1; i <= BAR_5; i++) {
-- if(pci_resource_len(pdev, i) == 0) {
-- continue;
-- }
-- if(pci_resource_flags(pdev, i) & IORESOURCE_IO) {
-- adapter->hw.io_base = pci_resource_start(pdev, i);
-- break;
-- }
-- }
--
-- netdev->open = &iegbe_open;
-- netdev->stop = &iegbe_close;
-- netdev->hard_start_xmit = &iegbe_xmit_frame;
-- netdev->get_stats = &iegbe_get_stats;
-- netdev->set_multicast_list = &iegbe_set_multi;
-+ pci_set_drvdata(pdev, netdev);
-+ adapter = netdev_priv(netdev);
-+ adapter->netdev = netdev;
-+ adapter->pdev = pdev;
-+ adapter->msg_enable = (1 << debug) - 1;
-+ adapter->bars = bars;
-+
-+ hw = &adapter->hw;
-+ hw->back = adapter;
-+
-+ err = -EIO;
-+ hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-+ pci_resource_len(pdev, BAR_0));
-+ if (!hw->hw_addr)
-+ goto err_ioremap;
-+
-+ netdev->open = &iegbe_open;
-+ netdev->stop = &iegbe_close;
-+ netdev->hard_start_xmit = &iegbe_xmit_frame;
-+ netdev->get_stats = &iegbe_get_stats;
-+ netdev->set_rx_mode = &iegbe_set_rx_mode;
- netdev->set_mac_address = &iegbe_set_mac;
-- netdev->change_mtu = &iegbe_change_mtu;
-- netdev->do_ioctl = &iegbe_ioctl;
-+ netdev->change_mtu = &iegbe_change_mtu;
-+ netdev->do_ioctl = &iegbe_ioctl;
- set_ethtool_ops(netdev);
--#ifdef HAVE_TX_TIMEOUT
-- netdev->tx_timeout = &iegbe_tx_timeout;
-- netdev->watchdog_timeo = 0x5 * HZ;
--#endif
--#ifdef CONFIG_E1000_NAPI
-- netdev->poll = &iegbe_clean;
-- netdev->weight = 0x40;
--#endif
--#ifdef NETIF_F_HW_VLAN_TX
-- netdev->vlan_rx_register = iegbe_vlan_rx_register;
-- netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
-- netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
--#endif
-+ netdev->tx_timeout = &iegbe_tx_timeout;
-+ netdev->watchdog_timeo = 5 * HZ;
-+ netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
-+ netdev->vlan_rx_register = iegbe_vlan_rx_register;
-+ netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
-+ netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
- #ifdef CONFIG_NET_POLL_CONTROLLER
-- netdev->poll_controller = iegbe_netpoll;
-+ netdev->poll_controller = iegbe_netpoll;
- #endif
-- strcpy(netdev->name, pci_name(pdev));
-+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
-- netdev->mem_start = mmio_start;
-- netdev->mem_end = mmio_start + mmio_len;
-- netdev->base_addr = adapter->hw.io_base;
-
-- adapter->bd_number = cards_found;
-+ adapter->bd_number = cards_found;
-
-- /* setup the private structure */
-+ /* setup the private structure */
-
-- if((err = iegbe_sw_init(adapter))) {
-- goto err_sw_init;
-- }
-- if((err = iegbe_check_phy_reset_block(&adapter->hw))) {
-- DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
-- }
--#ifdef MAX_SKB_FRAGS
-- if(adapter->hw.mac_type >= iegbe_82543) {
--#ifdef NETIF_F_HW_VLAN_TX
-- netdev->features = NETIF_F_SG |
-- NETIF_F_HW_CSUM |
-- NETIF_F_HW_VLAN_TX |
-- NETIF_F_HW_VLAN_RX |
-- NETIF_F_HW_VLAN_FILTER;
--#else
-- netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM;
--#endif
-- }
-+ err = iegbe_sw_init(adapter);
-+ if (err)
-+ goto err_sw_init;
-+ err = -EIO;
-+ if (iegbe_check_phy_reset_block(hw))
-+ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
-
--#ifdef NETIF_F_TSO
-- if((adapter->hw.mac_type >= iegbe_82544) &&
-- (adapter->hw.mac_type != iegbe_82547)) {
-- netdev->features |= NETIF_F_TSO;
-- }
--#ifdef NETIF_F_TSO_IPV6
-- if(adapter->hw.mac_type > iegbe_82547_rev_2) {
-- netdev->features |= NETIF_F_TSO_IPV6;
-- }
--#endif
--#endif
-- if(pci_using_dac) {
-- netdev->features |= NETIF_F_HIGHDMA;
-+ if (hw->mac_type >= iegbe_82543) {
-+ netdev->features = NETIF_F_SG |
-+ NETIF_F_HW_CSUM |
-+ NETIF_F_HW_VLAN_TX |
-+ NETIF_F_HW_VLAN_RX |
-+ NETIF_F_HW_VLAN_FILTER;
- }
--#endif
--#ifdef NETIF_F_LLTX
-- netdev->features |= NETIF_F_LLTX;
--#endif
-
-- adapter->en_mng_pt = iegbe_enable_mng_pass_thru(&adapter->hw);
-+ if ((hw->mac_type >= iegbe_82544) &&
-+ (hw->mac_type != iegbe_82547))
-+ netdev->features |= NETIF_F_TSO;
-
-- /* before reading the EEPROM, reset the controller to
-- * put the device in a known good starting state */
-+ if (hw->mac_type > iegbe_82547_rev_2)
-+ netdev->features |= NETIF_F_TSO6;
-+ if (pci_using_dac)
-+ netdev->features |= NETIF_F_HIGHDMA;
-+
-+ netdev->features |= NETIF_F_LLTX;
-
-- iegbe_reset_hw(&adapter->hw);
-+ adapter->en_mng_pt = iegbe_enable_mng_pass_thru(hw);
-
-- /* make sure the EEPROM is good */
-- if(iegbe_validate_eeprom_checksum(&adapter->hw) < 0) {
-- DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
-- err = -EIO;
-+ /* initialize eeprom parameters */
-+
-+ if (iegbe_init_eeprom_params(hw)) {
-+ E1000_ERR("EEPROM initialization failed\n");
- goto err_eeprom;
- }
-
-- /* copy the MAC address out of the EEPROM */
-+ /* before reading the EEPROM, reset the controller to
-+ * put the device in a known good starting state */
-
-- if(iegbe_read_mac_addr(&adapter->hw)) {
-- DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
-- }
-- memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
-+ iegbe_reset_hw(hw);
-
-- if(!is_valid_ether_addr(netdev->dev_addr)) {
-- DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
-- err = -EIO;
-- goto err_eeprom;
-- }
-+ /* make sure the EEPROM is good */
-+ if (iegbe_validate_eeprom_checksum(hw) < 0) {
-+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
-+ iegbe_dump_eeprom(adapter);
-+ /*
-+ * set MAC address to all zeroes to invalidate and temporary
-+ * disable this device for the user. This blocks regular
-+ * traffic while still permitting ethtool ioctls from reaching
-+ * the hardware as well as allowing the user to run the
-+ * interface after manually setting a hw addr using
-+ * `ip set address`
-+ */
-+ memset(hw->mac_addr, 0, netdev->addr_len);
-+ } else {
-+ /* copy the MAC address out of the EEPROM */
-+ if (iegbe_read_mac_addr(hw))
-+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
-+ }
-+ /* don't block initalization here due to bad MAC address */
-+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
-+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
-
-- iegbe_read_part_num(&adapter->hw, &(adapter->part_num));
-+ if (!is_valid_ether_addr(netdev->perm_addr))
-+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
-
-- iegbe_get_bus_info(&adapter->hw);
-+ iegbe_get_bus_info(hw);
-
- init_timer(&adapter->tx_fifo_stall_timer);
- adapter->tx_fifo_stall_timer.function = &iegbe_82547_tx_fifo_stall;
-- adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
-+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = &iegbe_watchdog;
-@@ -906,75 +902,50 @@ iegbe_probe(struct pci_dev *pdev,
-
- init_timer(&adapter->phy_info_timer);
- adapter->phy_info_timer.function = &iegbe_update_phy_info;
-- adapter->phy_info_timer.data = (unsigned long) adapter;
--
-- INIT_WORK(&adapter->tx_timeout_task,
-- (void (*)(void *))iegbe_tx_timeout_task, netdev);
-+ adapter->phy_info_timer.data = (unsigned long)adapter;
-
-- /* we're going to reset, so assume we have no link for now */
--
-- netif_carrier_off(netdev);
-- netif_stop_queue(netdev);
-+ INIT_WORK(&adapter->reset_task, iegbe_reset_task);
-
-- iegbe_check_options(adapter);
-+ iegbe_check_options(adapter);
-
-- /* Initial Wake on LAN setting
-- * If APM wake is enabled in the EEPROM,
-- * enable the ACPI Magic Packet filter
-- */
-+ /* Initial Wake on LAN setting
-+ * If APM wake is enabled in the EEPROM,
-+ * enable the ACPI Magic Packet filter
-+ */
-
-- switch(adapter->hw.mac_type) {
-- case iegbe_82542_rev2_0:
-- case iegbe_82542_rev2_1:
-- case iegbe_82543:
-- break;
-- case iegbe_82544:
-- iegbe_read_eeprom(&adapter->hw,
-- EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
-- eeprom_apme_mask = E1000_EEPROM_82544_APM;
-- break;
-+ switch(adapter->hw.mac_type) {
-+ case iegbe_82542_rev2_0:
-+ case iegbe_82542_rev2_1:
-+ case iegbe_82543:
-+ break;
-+ case iegbe_82544:
-+ iegbe_read_eeprom(&adapter->hw,
-+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
-+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
-+ break;
- case iegbe_icp_xxxx:
-- iegbe_read_eeprom(&adapter->hw,
-- EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
-- 1, &eeprom_data);
-- eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
-- break;
-- case iegbe_82546:
-- case iegbe_82546_rev_3:
-- if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
-- && (adapter->hw.media_type == iegbe_media_type_copper)) {
-- iegbe_read_eeprom(&adapter->hw,
-- EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
-- break;
-- }
-- /* Fall Through */
-- default:
-- iegbe_read_eeprom(&adapter->hw,
-- EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
-- break;
-- }
-+ iegbe_read_eeprom(&adapter->hw,
-+ EEPROM_INIT_CONTROL3_ICP_xxxx(adapter->bd_number),
-+ 1, &eeprom_data);
-+ eeprom_apme_mask = EEPROM_CTRL3_APME_ICP_xxxx;
-+ break;
-+ case iegbe_82546:
-+ case iegbe_82546_rev_3:
-+ if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
-+ && (adapter->hw.media_type == iegbe_media_type_copper)) {
-+ iegbe_read_eeprom(&adapter->hw,
-+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
-+ break;
-+ }
-+ /* Fall Through */
-+ default:
-+ iegbe_read_eeprom(&adapter->hw,
-+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
-+ break;
-+ }
- if(eeprom_data & eeprom_apme_mask) {
-- adapter->wol |= E1000_WUFC_MAG;
-+ adapter->wol |= E1000_WUFC_MAG;
- }
-- /* reset the hardware with the new settings */
-- iegbe_reset(adapter);
--
-- /* Let firmware know the driver has taken over */
-- switch(adapter->hw.mac_type) {
-- case iegbe_82571:
-- case iegbe_82572:
-- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-- break;
-- case iegbe_82573:
-- swsm = E1000_READ_REG(&adapter->hw, SWSM);
-- E1000_WRITE_REG(&adapter->hw, SWSM,
-- swsm | E1000_SWSM_DRV_LOAD);
-- break;
-- default:
-- break;
-- }
-
- /* The ICP_xxxx device has multiple, duplicate interrupt
- * registers, so disable all but the first one
-@@ -987,24 +958,40 @@ iegbe_probe(struct pci_dev *pdev,
- E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
- }
-
-- strcpy(netdev->name, "eth%d");
-- if((err = register_netdev(netdev))) {
-- goto err_register;
-- }
-+ iegbe_reset(adapter);
-+ netif_carrier_off(netdev);
-+ netif_stop_queue(netdev);
-+ strcpy(netdev->name, "eth%d");
-+ err = register_netdev(netdev);
-+ if (err)
-+ goto err_register;
-+
- DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
-
-- cards_found++;
-- return 0;
-+ cards_found++;
-+ return 0;
-
- err_register:
--err_sw_init:
- err_eeprom:
-- iounmap(adapter->hw.hw_addr);
-+ if (!iegbe_check_phy_reset_block(hw))
-+ iegbe_phy_hw_reset(hw);
-+ if (hw->flash_address)
-+ iounmap(hw->flash_address);
-+ for (i = 0; i < adapter->num_rx_queues; i++)
-+ dev_put(&adapter->polling_netdev[i]);
-+ kfree(adapter->tx_ring);
-+ kfree(adapter->rx_ring);
-+ kfree(adapter->polling_netdev);
-+err_sw_init:
-+ iounmap(hw->hw_addr);
- err_ioremap:
-- free_netdev(netdev);
-+ free_netdev(netdev);
- err_alloc_etherdev:
-- pci_release_regions(pdev);
-- return err;
-+ pci_release_selected_regions(pdev, bars);
-+err_pci_reg:
-+err_dma:
-+ pci_disable_device(pdev);
-+ return err;
- }
-
- /**
-@@ -1020,64 +1007,36 @@ err_alloc_etherdev:
- static void __devexit
- iegbe_remove(struct pci_dev *pdev)
- {
-- struct net_device *netdev = pci_get_drvdata(pdev);
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t ctrl_ext;
-- uint32_t manc, swsm;
--#ifdef CONFIG_E1000_NAPI
-- int i;
--#endif
--
-- if(adapter->hw.mac_type >= iegbe_82540
-- && adapter->hw.mac_type != iegbe_icp_xxxx
-- && adapter->hw.media_type == iegbe_media_type_copper) {
-- manc = E1000_READ_REG(&adapter->hw, MANC);
-- if(manc & E1000_MANC_SMBUS_EN) {
-- manc |= E1000_MANC_ARP_EN;
-- E1000_WRITE_REG(&adapter->hw, MANC, manc);
-- }
-- }
--
-- switch(adapter->hw.mac_type) {
-- case iegbe_82571:
-- case iegbe_82572:
-- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-- break;
-- case iegbe_82573:
-- swsm = E1000_READ_REG(&adapter->hw, SWSM);
-- E1000_WRITE_REG(&adapter->hw, SWSM,
-- swsm & ~E1000_SWSM_DRV_LOAD);
-- break;
--
-- default:
-- break;
-- }
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ uint32_t manc;
-+ int i;
-+
-+ if(adapter->hw.mac_type >= iegbe_82540
-+ && adapter->hw.mac_type != iegbe_icp_xxxx
-+ && adapter->hw.media_type == iegbe_media_type_copper) {
-+ manc = E1000_READ_REG(&adapter->hw, MANC);
-+ if(manc & E1000_MANC_SMBUS_EN) {
-+ manc |= E1000_MANC_ARP_EN;
-+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+ }
-+ }
-
-- unregister_netdev(netdev);
--#ifdef CONFIG_E1000_NAPI
-- for (i = 0; i < adapter->num_queues; i++)
-+ unregister_netdev(netdev);
-+ for (i = 0x0; i < adapter->num_rx_queues; i++)
- dev_put(&adapter->polling_netdev[i]);
--#endif
-
- if(!iegbe_check_phy_reset_block(&adapter->hw)) {
-- iegbe_phy_hw_reset(&adapter->hw);
-+ iegbe_phy_hw_reset(&adapter->hw);
- }
-- kfree(adapter->tx_ring);
-- kfree(adapter->rx_ring);
--#ifdef CONFIG_E1000_NAPI
-- kfree(adapter->polling_netdev);
--#endif
-+ kfree(adapter->tx_ring);
-+ kfree(adapter->rx_ring);
-+ kfree(adapter->polling_netdev);
-
-- iounmap(adapter->hw.hw_addr);
-- pci_release_regions(pdev);
-+ iounmap(adapter->hw.hw_addr);
-+ pci_release_regions(pdev);
-
--#ifdef CONFIG_E1000_MQ
-- free_percpu(adapter->cpu_netdev);
-- free_percpu(adapter->cpu_tx_ring);
--#endif
-- free_netdev(netdev);
-+ free_netdev(netdev);
- }
-
- /**
-@@ -1092,118 +1051,78 @@ iegbe_remove(struct pci_dev *pdev)
- static int __devinit
- iegbe_sw_init(struct iegbe_adapter *adapter)
- {
-- struct iegbe_hw *hw = &adapter->hw;
-- struct net_device *netdev = adapter->netdev;
-- struct pci_dev *pdev = adapter->pdev;
--#ifdef CONFIG_E1000_NAPI
-- int i;
--#endif
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct pci_dev *pdev = adapter->pdev;
-+ int i;
-
-- /* PCI config space info */
-+ /* PCI config space info */
-
-- hw->vendor_id = pdev->vendor;
-- hw->device_id = pdev->device;
-- hw->subsystem_vendor_id = pdev->subsystem_vendor;
-- hw->subsystem_id = pdev->subsystem_device;
-+ hw->vendor_id = pdev->vendor;
-+ hw->device_id = pdev->device;
-+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
-+ hw->subsystem_id = pdev->subsystem_device;
-
-- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
-+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
-
-- pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-
-- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-- adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
-- hw->max_frame_size = netdev->mtu +
-- ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-- hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
-+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-+ adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
-+ hw->max_frame_size = netdev->mtu +
-+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
-
-- /* identify the MAC */
-+ /* identify the MAC */
-
-- if(iegbe_set_mac_type(hw)) {
-+ if (iegbe_set_mac_type(hw)) {
- DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
- return -EIO;
- }
-
-- /* initialize eeprom parameters */
--
-- if(iegbe_init_eeprom_params(hw)) {
-- E1000_ERR("EEPROM initialization failed\n");
-- return -EIO;
-- }
--
-- switch(hw->mac_type) {
-- default:
-- break;
-- case iegbe_82541:
-- case iegbe_82547:
-- case iegbe_82541_rev_2:
-- case iegbe_82547_rev_2:
-- hw->phy_init_script = 0x1;
-- break;
-- }
--
-- iegbe_set_media_type(hw);
-+ iegbe_set_media_type(hw);
-
-- hw->wait_autoneg_complete = FALSE;
-- hw->tbi_compatibility_en = TRUE;
-- hw->adaptive_ifs = TRUE;
-+ hw->wait_autoneg_complete = FALSE;
-+ hw->tbi_compatibility_en = TRUE;
-+ hw->adaptive_ifs = TRUE;
-
-- /* Copper options */
-+ /* Copper options */
-
-- if(hw->media_type == iegbe_media_type_copper
-+ if(hw->media_type == iegbe_media_type_copper
- || (hw->media_type == iegbe_media_type_oem
- && iegbe_oem_phy_is_copper(&adapter->hw))) {
-- hw->mdix = AUTO_ALL_MODES;
-- hw->disable_polarity_correction = FALSE;
-- hw->master_slave = E1000_MASTER_SLAVE;
-- }
-+ hw->mdix = AUTO_ALL_MODES;
-+ hw->disable_polarity_correction = FALSE;
-+ hw->master_slave = E1000_MASTER_SLAVE;
-+ }
-
--#ifdef CONFIG_E1000_MQ
-- /* Number of supported queues */
-- switch (hw->mac_type) {
-- case iegbe_82571:
-- case iegbe_82572:
-- adapter->num_queues = 0x2;
-- break;
-- default:
-- adapter->num_queues = 0x1;
-- break;
-- }
-- adapter->num_queues = min(adapter->num_queues, num_online_cpus());
--#else
-- adapter->num_queues = 0x1;
--#endif
-+ adapter->num_tx_queues = 0x1;
-+ adapter->num_rx_queues = 0x1;
-
- if (iegbe_alloc_queues(adapter)) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
--#ifdef CONFIG_E1000_NAPI
-- for (i = 0; i < adapter->num_queues; i++) {
-+ for (i = 0; i < adapter->num_rx_queues; i++) {
- adapter->polling_netdev[i].priv = adapter;
-- adapter->polling_netdev[i].poll = &iegbe_clean;
-- adapter->polling_netdev[i].weight = 0x40;
- dev_hold(&adapter->polling_netdev[i]);
- set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
- }
--#endif
--
--#ifdef CONFIG_E1000_MQ
-- iegbe_setup_queue_mapping(adapter);
--#endif
-+ spin_lock_init(&adapter->tx_queue_lock);
-
- /*
-- * for ICP_XXXX style controllers, it is necessary to keep
-- * track of the last known state of the link to determine if
-- * the link experienced a change in state when iegbe_watchdog
-- * fires
-- */
-- adapter->hw.icp_xxxx_is_link_up = FALSE;
-+ * for ICP_XXXX style controllers, it is necessary to keep
-+ * track of the last known state of the link to determine if
-+ * the link experienced a change in state when iegbe_watchdog
-+ * fires
-+ */
-+ adapter->hw.icp_xxxx_is_link_up = FALSE;
-
-- atomic_set(&adapter->irq_sem, 1);
-- spin_lock_init(&adapter->stats_lock);
-+ spin_lock_init(&adapter->stats_lock);
-
-- return 0;
-+ set_bit(__E1000_DOWN, &adapter->flags);
-+ return 0x0;
- }
-
- /**
-@@ -1218,71 +1137,31 @@ iegbe_sw_init(struct iegbe_adapter *adap
- static int __devinit
- iegbe_alloc_queues(struct iegbe_adapter *adapter)
- {
-- int size;
-
-- size = sizeof(struct iegbe_tx_ring) * adapter->num_queues;
-- adapter->tx_ring = kmalloc(size, GFP_KERNEL);
-- if (!adapter->tx_ring){
-+
-+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
-+ sizeof(struct iegbe_tx_ring), GFP_KERNEL);
-+ if (!adapter->tx_ring)
- return -ENOMEM;
-- }
-- memset(adapter->tx_ring, 0, size);
-
-- size = sizeof(struct iegbe_rx_ring) * adapter->num_queues;
-- adapter->rx_ring = kmalloc(size, GFP_KERNEL);
-+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
-+ sizeof(struct iegbe_rx_ring), GFP_KERNEL);
- if (!adapter->rx_ring) {
- kfree(adapter->tx_ring);
- return -ENOMEM;
- }
-- memset(adapter->rx_ring, 0, size);
-
--#ifdef CONFIG_E1000_NAPI
-- size = sizeof(struct net_device) * adapter->num_queues;
-- adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
-+ adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
-+ sizeof(struct net_device),
-+ GFP_KERNEL);
- if (!adapter->polling_netdev) {
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
- return -ENOMEM;
- }
-- memset(adapter->polling_netdev, 0, size);
--#endif
--
-- return E1000_SUCCESS;
--}
-
--#ifdef CONFIG_E1000_MQ
--static void __devinit
--iegbe_setup_queue_mapping(struct iegbe_adapter *adapter)
--{
-- int i, cpu;
--
-- adapter->rx_sched_call_data.func = iegbe_rx_schedule;
-- adapter->rx_sched_call_data.info = adapter->netdev;
-- cpus_clear(adapter->rx_sched_call_data.cpumask);
--
-- adapter->cpu_netdev = alloc_percpu(struct net_device *);
-- adapter->cpu_tx_ring = alloc_percpu(struct iegbe_tx_ring *);
--
-- lock_cpu_hotplug();
-- i = 0;
-- for_each_online_cpu(cpu) {
-- *per_cpu_ptr(adapter->cpu_tx_ring, cpu) =
-- &adapter->tx_ring[i % adapter->num_queues];
-- /* This is incomplete because we'd like to assign separate
-- * physical cpus to these netdev polling structures and
-- * avoid saturating a subset of cpus.
-- */
-- if (i < adapter->num_queues) {
-- *per_cpu_ptr(adapter->cpu_netdev, cpu) =
-- &adapter->polling_netdev[i];
-- adapter->cpu_for_queue[i] = cpu;
-- } else {
-- *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
-- }
-- i++;
-- }
-- unlock_cpu_hotplug();
-+ return E1000_SUCCESS;
- }
--#endif
-
- /**
- * iegbe_open - Called when a network interface is made active
-@@ -1300,40 +1179,62 @@ iegbe_setup_queue_mapping(struct iegbe_a
- static int
- iegbe_open(struct net_device *netdev)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- int err;
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ int err;
-+
-
-+ /* allocate receive descriptors */
-+ if (test_bit(__E1000_TESTING, &adapter->flags))
-+ return -EBUSY;
-
-- /* allocate receive descriptors */
-+ /* allocate transmit descriptors */
-+ err = iegbe_setup_all_tx_resources(adapter);
-+ if (err)
-+ goto err_setup_tx;
-
-- if ((err = iegbe_setup_all_rx_resources(adapter))) {
-+ err = iegbe_setup_all_rx_resources(adapter);
-+ if (err)
- goto err_setup_rx;
-- }
-- /* allocate transmit descriptors */
-- if ((err = iegbe_setup_all_tx_resources(adapter))) {
-- goto err_setup_tx;
-- }
-- if ((err = iegbe_up(adapter))) {
-- goto err_up;
-- }
--#ifdef NETIF_F_HW_VLAN_TX
-- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-- if ((adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
-- iegbe_update_mng_vlan(adapter);
-- }
--#endif
-
-- return E1000_SUCCESS;
-+ iegbe_power_up_phy(adapter);
-+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+ if ((hw->mng_cookie.status &
-+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
-+ iegbe_update_mng_vlan(adapter);
-+ }
-+
-+ /* before we allocate an interrupt, we must be ready to handle it.
-+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
-+ * as soon as we call pci_request_irq, so we have to setup our
-+ * clean_rx handler before we do so. */
-+ iegbe_configure(adapter);
-+ err = iegbe_request_irq(adapter);
-+ if (err)
-+ goto err_req_irq;
-
--err_up:
-- iegbe_free_all_tx_resources(adapter);
--err_setup_tx:
-- iegbe_free_all_rx_resources(adapter);
-+ /* From here on the code is the same as iegbe_up() */
-+ clear_bit(__E1000_DOWN, &adapter->flags);
-+
-+ napi_enable(&adapter->napi);
-+
-+ iegbe_irq_enable(adapter);
-+
-+ netif_start_queue(netdev);
-+
-+ /* fire a link status change interrupt to start the watchdog */
-+
-+ return E1000_SUCCESS;
-+
-+err_req_irq:
-+ iegbe_power_down_phy(adapter);
-+ iegbe_free_all_rx_resources(adapter);
- err_setup_rx:
-- iegbe_reset(adapter);
-+ iegbe_free_all_tx_resources(adapter);
-+err_setup_tx:
-+ iegbe_reset(adapter);
-
-- return err;
-+ return err;
- }
-
- /**
-@@ -1348,22 +1249,25 @@ err_setup_rx:
- * hardware, and all transmit and receive resources are freed.
- **/
-
--static int
--iegbe_close(struct net_device *netdev)
-+static int iegbe_close(struct net_device *netdev)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
--
-- iegbe_down(adapter);
--
-- iegbe_free_all_tx_resources(adapter);
-- iegbe_free_all_rx_resources(adapter);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
-
--#ifdef NETIF_F_HW_VLAN_TX
-- if((adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
-+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
-+ iegbe_down(adapter);
-+ iegbe_power_down_phy(adapter);
-+ iegbe_free_irq(adapter);
-+
-+ iegbe_free_all_tx_resources(adapter);
-+ iegbe_free_all_rx_resources(adapter);
-+
-+ if ((hw->mng_cookie.status &
-+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-+ !(adapter->vlgrp &&
-+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
- iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- }
--#endif
- return 0;
- }
-
-@@ -1375,19 +1279,19 @@ iegbe_close(struct net_device *netdev)
- **/
- static inline boolean_t
- iegbe_check_64k_bound(struct iegbe_adapter *adapter,
-- void *start, unsigned long len)
-+ void *start, unsigned long len)
- {
-- unsigned long begin = (unsigned long) start;
-- unsigned long end = begin + len;
-+ unsigned long begin = (unsigned long) start;
-+ unsigned long end = begin + len;
-
-- /* First rev 82545 and 82546 need to not allow any memory
-- * write location to cross 64k boundary due to errata 23 */
-- if(adapter->hw.mac_type == iegbe_82545 ||
-- adapter->hw.mac_type == iegbe_82546) {
-- return ((begin ^ (end - 1)) >> 0x10) != 0 ? FALSE : TRUE;
-- }
-+ /* First rev 82545 and 82546 need to not allow any memory
-+ * write location to cross 64k boundary due to errata 23 */
-+ if(adapter->hw.mac_type == iegbe_82545 ||
-+ adapter->hw.mac_type == iegbe_82546) {
-+ return ((begin ^ (end - 1)) >> 0x10) != 0x0 ? FALSE : TRUE;
-+ }
-
-- return TRUE;
-+ return TRUE;
- }
-
- /**
-@@ -1398,102 +1302,98 @@ iegbe_check_64k_bound(struct iegbe_adapt
- * Return 0 on success, negative on failure
- **/
-
--int
--iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_tx_resources(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *txdr)
- {
-- struct pci_dev *pdev = adapter->pdev;
-- int size;
-+ struct pci_dev *pdev = adapter->pdev;
-+ int size;
-
-- size = sizeof(struct iegbe_buffer) * txdr->count;
-- txdr->buffer_info = vmalloc(size);
-- if (!txdr->buffer_info) {
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the transmit descriptor ring\n");
-- return -ENOMEM;
-- }
-+ size = sizeof(struct iegbe_buffer) * txdr->count;
-+ txdr->buffer_info = vmalloc(size);
-+ if (!txdr->buffer_info) {
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the transmit descriptor ring\n");
-+ return -ENOMEM;
-+ }
- memset(txdr->buffer_info, 0, size);
-- memset(&txdr->previous_buffer_info, 0, sizeof(struct iegbe_buffer));
-
-- /* round up to nearest 4K */
-+ /* round up to nearest 4K */
-
-- txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
-- E1000_ROUNDUP(txdr->size, 0x1000);
-+ txdr->size = txdr->count * sizeof(struct iegbe_tx_desc);
-+ txdr->size = ALIGN(txdr->size, 4096);
-
-- txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-- if (!txdr->desc) {
-+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-+ if (!txdr->desc) {
- setup_tx_desc_die:
-- vfree(txdr->buffer_info);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the transmit descriptor ring\n");
-- return -ENOMEM;
-- }
--
-- /* Fix for errata 23, can't cross 64kB boundary */
-- if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-- void *olddesc = txdr->desc;
-- dma_addr_t olddma = txdr->dma;
-- DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
-- "at %p\n", txdr->size, txdr->desc);
-- /* Try again, without freeing the previous */
-- txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-- /* Failed allocation, critical failure */
-- if (!txdr->desc) {
-- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-- goto setup_tx_desc_die;
-- }
-+ vfree(txdr->buffer_info);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the transmit descriptor ring\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Fix for errata 23, can't cross 64kB boundary */
-+ if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+ void *olddesc = txdr->desc;
-+ dma_addr_t olddma = txdr->dma;
-+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
-+ "at %p\n", txdr->size, txdr->desc);
-+ /* Try again, without freeing the previous */
-+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-+ /* Failed allocation, critical failure */
-+ if (!txdr->desc) {
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ goto setup_tx_desc_die;
-+ }
-
-- if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-- /* give up */
-- pci_free_consistent(pdev, txdr->size, txdr->desc,
-- txdr->dma);
-- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate aligned memory "
-- "for the transmit descriptor ring\n");
-- vfree(txdr->buffer_info);
-- return -ENOMEM;
-- } else {
-- /* Free old allocation, new allocation was successful */
-- pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-- }
-- }
-+ if (!iegbe_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+ /* give up */
-+ pci_free_consistent(pdev, txdr->size, txdr->desc,
-+ txdr->dma);
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate aligned memory "
-+ "for the transmit descriptor ring\n");
-+ vfree(txdr->buffer_info);
-+ return -ENOMEM;
-+ } else {
-+ /* Free old allocation, new allocation was successful */
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ }
-+ }
- memset(txdr->desc, 0, txdr->size);
-
- txdr->next_to_use = 0;
- txdr->next_to_clean = 0;
-- spin_lock_init(&txdr->tx_lock);
-+ spin_lock_init(&txdr->tx_lock);
-
- return 0;
- }
-
- /**
- * iegbe_setup_all_tx_resources - wrapper to allocate Tx resources
-- * (Descriptors) for all queues
-+ * (Descriptors) for all queues
- * @adapter: board private structure
- *
-- * If this function returns with an error, then it's possible one or
-- * more of the rings is populated (while the rest are not). It is the
-- * callers duty to clean those orphaned rings.
-- *
- * Return 0 on success, negative on failure
- **/
-
--int
--iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
-+int iegbe_setup_all_tx_resources(struct iegbe_adapter *adapter)
- {
- int i, err = 0;
-
-- for (i = 0; i < adapter->num_queues; i++) {
-+ for (i = 0; i < adapter->num_tx_queues; i++) {
- err = iegbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
- if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Tx Queue %u failed\n", i);
-+ for (i-- ; i >= 0; i--)
-+ iegbe_free_tx_resources(adapter,
-+ &adapter->tx_ring[i]);
- break;
- }
- }
-
-- return err;
-+ return err;
- }
-
- /**
-@@ -1512,113 +1412,108 @@ iegbe_configure_tx(struct iegbe_adapter
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
-
-- switch (adapter->num_queues) {
-+ switch (adapter->num_tx_queues) {
- case 0x2:
- tdba = adapter->tx_ring[0x1].dma;
- tdlen = adapter->tx_ring[0x1].count *
-- sizeof(struct iegbe_tx_desc);
-- E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
-+ sizeof(struct iegbe_tx_desc);
-+ E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, TDBAH1, (tdba >> 0x20));
-- E1000_WRITE_REG(hw, TDLEN1, tdlen);
-- E1000_WRITE_REG(hw, TDH1, 0);
-- E1000_WRITE_REG(hw, TDT1, 0);
-+ E1000_WRITE_REG(hw, TDLEN1, tdlen);
-+ E1000_WRITE_REG(hw, TDH1, 0x0);
-+ E1000_WRITE_REG(hw, TDT1, 0x0);
- adapter->tx_ring[0x1].tdh = E1000_TDH1;
- adapter->tx_ring[0x1].tdt = E1000_TDT1;
-- /* Fall Through */
-+ /* Fall Through */
- case 0x1:
-- default:
-- tdba = adapter->tx_ring[0].dma;
-- tdlen = adapter->tx_ring[0].count *
-- sizeof(struct iegbe_tx_desc);
-- E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-+ default:
-+ tdba = adapter->tx_ring[0x0].dma;
-+ tdlen = adapter->tx_ring[0x0].count *
-+ sizeof(struct iegbe_tx_desc);
-+ E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, TDBAH, (tdba >> 0x20));
-- E1000_WRITE_REG(hw, TDLEN, tdlen);
-- E1000_WRITE_REG(hw, TDH, 0);
-- E1000_WRITE_REG(hw, TDT, 0);
-- adapter->tx_ring[0].tdh = E1000_TDH;
-- adapter->tx_ring[0].tdt = E1000_TDT;
-- break;
-- }
--
-- /* Set the default values for the Tx Inter Packet Gap timer */
--
-- switch (hw->mac_type) {
-- case iegbe_82542_rev2_0:
-- case iegbe_82542_rev2_1:
-- tipg = DEFAULT_82542_TIPG_IPGT;
-- tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-- tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-- break;
-- default:
-- switch(hw->media_type) {
-- case iegbe_media_type_fiber:
-- case iegbe_media_type_internal_serdes:
-- tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
-- break;
-- case iegbe_media_type_copper:
-- tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-- break;
-- case iegbe_media_type_oem:
-- default:
-+ E1000_WRITE_REG(hw, TDLEN, tdlen);
-+ E1000_WRITE_REG(hw, TDH, 0x0);
-+ E1000_WRITE_REG(hw, TDT, 0x0);
-+ adapter->tx_ring[0x0].tdh = E1000_TDH;
-+ adapter->tx_ring[0x0].tdt = E1000_TDT;
-+ break;
-+ }
-+
-+ /* Set the default values for the Tx Inter Packet Gap timer */
-+
-+ switch (hw->mac_type) {
-+ case iegbe_82542_rev2_0:
-+ case iegbe_82542_rev2_1:
-+ tipg = DEFAULT_82542_TIPG_IPGT;
-+ tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-+ tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-+ break;
-+ default:
-+ switch(hw->media_type) {
-+ case iegbe_media_type_fiber:
-+ case iegbe_media_type_internal_serdes:
-+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
-+ break;
-+ case iegbe_media_type_copper:
-+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-+ break;
-+ case iegbe_media_type_oem:
-+ default:
- tipg = (0xFFFFFFFFUL >> (sizeof(tipg)*0x8 -
- E1000_TIPG_IPGR1_SHIFT))
-- & iegbe_oem_get_tipg(&adapter->hw);
-- break;
-- }
-- tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-- tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-- }
-- E1000_WRITE_REG(hw, TIPG, tipg);
-+ & iegbe_oem_get_tipg(&adapter->hw);
-+ break;
-+ }
-+ tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-+ tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
-+ }
-+ E1000_WRITE_REG(hw, TIPG, tipg);
-
-- /* Set the Tx Interrupt Delay register */
-+ /* Set the Tx Interrupt Delay register */
-
-- E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
-+ E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
- if (hw->mac_type >= iegbe_82540) {
-- E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
-+ E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
- }
-- /* Program the Transmit Control Register */
-+ /* Program the Transmit Control Register */
-
-- tctl = E1000_READ_REG(hw, TCTL);
-+ tctl = E1000_READ_REG(hw, TCTL);
-
-- tctl &= ~E1000_TCTL_CT;
-- tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
-- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-+ tctl &= ~E1000_TCTL_CT;
-+ tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
-+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
-- E1000_WRITE_REG(hw, TCTL, tctl);
-+ E1000_WRITE_REG(hw, TCTL, tctl);
-
-- if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
-- tarc = E1000_READ_REG(hw, TARC0);
-+ if (hw->mac_type == iegbe_82571 || hw->mac_type == iegbe_82572) {
-+ tarc = E1000_READ_REG(hw, TARC0);
- tarc |= ((0x1 << 0x19) | (0x1 << 0x15));
-- E1000_WRITE_REG(hw, TARC0, tarc);
-- tarc = E1000_READ_REG(hw, TARC1);
-+ E1000_WRITE_REG(hw, TARC0, tarc);
-+ tarc = E1000_READ_REG(hw, TARC1);
- tarc |= (0x1 << 0x19);
- if (tctl & E1000_TCTL_MULR) {
- tarc &= ~(0x1 << 0x1c);
- } else {
- tarc |= (0x1 << 0x1c);
- }
-- E1000_WRITE_REG(hw, TARC1, tarc);
-- }
-+ E1000_WRITE_REG(hw, TARC1, tarc);
-+ }
-
-- iegbe_config_collision_dist(hw);
-+ iegbe_config_collision_dist(hw);
-
-- /* Setup Transmit Descriptor Settings for eop descriptor */
-- adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
-- E1000_TXD_CMD_IFCS;
-+ /* Setup Transmit Descriptor Settings for eop descriptor */
-+ adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
-+ E1000_TXD_CMD_IFCS;
-
- if (hw->mac_type < iegbe_82543) {
-- adapter->txd_cmd |= E1000_TXD_CMD_RPS;
-+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
- } else {
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Disable the RS bit in the Tx descriptor */
-- adapter->txd_cmd &= ~E1000_TXD_CMD_RS;
--#else
-- adapter->txd_cmd |= E1000_TXD_CMD_RS;
--#endif
-+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
- }
-- /* Cache if we're 82544 running in PCI-X because we'll
-- * need this to apply a workaround later in the send path. */
-- if (hw->mac_type == iegbe_82544 &&
-+ /* Cache if we're 82544 running in PCI-X because we'll
-+ * need this to apply a workaround later in the send path. */
-+ if (hw->mac_type == iegbe_82544 &&
- hw->bus_type == iegbe_bus_type_pcix) {
- adapter->pcix_82544 = 0x1;
- }
-@@ -1632,96 +1527,95 @@ iegbe_configure_tx(struct iegbe_adapter
- * Returns 0 on success, negative on failure
- **/
-
--int
--iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
-+static int iegbe_setup_rx_resources(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rxdr)
- {
-- struct pci_dev *pdev = adapter->pdev;
-- int size, desc_len;
--
-- size = sizeof(struct iegbe_buffer) * rxdr->count;
-- rxdr->buffer_info = vmalloc(size);
-- if (!rxdr->buffer_info) {
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the receive descriptor ring\n");
-- return -ENOMEM;
-- }
-- memset(rxdr->buffer_info, 0, size);
--
-- size = sizeof(struct iegbe_ps_page) * rxdr->count;
-- rxdr->ps_page = kmalloc(size, GFP_KERNEL);
-- if (!rxdr->ps_page) {
-- vfree(rxdr->buffer_info);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the receive descriptor ring\n");
-- return -ENOMEM;
-- }
-- memset(rxdr->ps_page, 0, size);
--
-- size = sizeof(struct iegbe_ps_page_dma) * rxdr->count;
-- rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
-- if (!rxdr->ps_page_dma) {
-- vfree(rxdr->buffer_info);
-- kfree(rxdr->ps_page);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the receive descriptor ring\n");
-- return -ENOMEM;
-- }
-- memset(rxdr->ps_page_dma, 0, size);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct pci_dev *pdev = adapter->pdev;
-+ int size, desc_len;
-
-- if (adapter->hw.mac_type <= iegbe_82547_rev_2) {
-- desc_len = sizeof(struct iegbe_rx_desc);
-- } else {
-- desc_len = sizeof(union iegbe_rx_desc_packet_split);
-+ size = sizeof(struct iegbe_buffer) * rxdr->count;
-+ rxdr->buffer_info = vmalloc(size);
-+ if (!rxdr->buffer_info) {
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the receive descriptor ring\n");
-+ return -ENOMEM;
- }
-- /* Round up to nearest 4K */
--
-- rxdr->size = rxdr->count * desc_len;
-- E1000_ROUNDUP(rxdr->size, 0x1000);
--
-- rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+ memset(rxdr->buffer_info, 0, size);
-
-- if (!rxdr->desc) {
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory for the receive descriptor ring\n");
-+ rxdr->ps_page = kcalloc(rxdr->count, sizeof(struct iegbe_ps_page),
-+ GFP_KERNEL);
-+ if (!rxdr->ps_page) {
-+ vfree(rxdr->buffer_info);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the receive descriptor ring\n");
-+ return -ENOMEM;
-+ }
-+
-+ rxdr->ps_page_dma = kcalloc(rxdr->count,
-+ sizeof(struct iegbe_ps_page_dma),
-+ GFP_KERNEL);
-+ if (!rxdr->ps_page_dma) {
-+ vfree(rxdr->buffer_info);
-+ kfree(rxdr->ps_page);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the receive descriptor ring\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (hw->mac_type <= iegbe_82547_rev_2)
-+ desc_len = sizeof(struct iegbe_rx_desc);
-+ else
-+ desc_len = sizeof(union iegbe_rx_desc_packet_split);
-+
-+ /* Round up to nearest 4K */
-+
-+ rxdr->size = rxdr->count * desc_len;
-+ rxdr->size = ALIGN(rxdr->size, 4096);
-+
-+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+
-+ if (!rxdr->desc) {
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory for the receive descriptor ring\n");
- setup_rx_desc_die:
-- vfree(rxdr->buffer_info);
-- kfree(rxdr->ps_page);
-- kfree(rxdr->ps_page_dma);
-- return -ENOMEM;
-- }
--
-- /* Fix for errata 23, can't cross 64kB boundary */
-- if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-- void *olddesc = rxdr->desc;
-- dma_addr_t olddma = rxdr->dma;
-- DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
-- "at %p\n", rxdr->size, rxdr->desc);
-- /* Try again, without freeing the previous */
-- rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-- /* Failed allocation, critical failure */
-- if (!rxdr->desc) {
-- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate memory "
-- "for the receive descriptor ring\n");
-- goto setup_rx_desc_die;
-- }
-+ vfree(rxdr->buffer_info);
-+ kfree(rxdr->ps_page);
-+ kfree(rxdr->ps_page_dma);
-+ return -ENOMEM;
-+ }
-+
-+ /* Fix for errata 23, can't cross 64kB boundary */
-+ if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+ void *olddesc = rxdr->desc;
-+ dma_addr_t olddma = rxdr->dma;
-+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
-+ "at %p\n", rxdr->size, rxdr->desc);
-+ /* Try again, without freeing the previous */
-+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+ /* Failed allocation, critical failure */
-+ if (!rxdr->desc) {
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate memory "
-+ "for the receive descriptor ring\n");
-+ goto setup_rx_desc_die;
-+ }
-
-- if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-- /* give up */
-- pci_free_consistent(pdev, rxdr->size, rxdr->desc,
-- rxdr->dma);
-- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-- DPRINTK(PROBE, ERR,
-- "Unable to allocate aligned memory "
-- "for the receive descriptor ring\n");
-- goto setup_rx_desc_die;
-- } else {
-- /* Free old allocation, new allocation was successful */
-- pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-- }
-- }
-+ if (!iegbe_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+ /* give up */
-+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
-+ rxdr->dma);
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to allocate aligned memory "
-+ "for the receive descriptor ring\n");
-+ goto setup_rx_desc_die;
-+ } else {
-+ /* Free old allocation, new allocation was successful */
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ }
-+ }
- memset(rxdr->desc, 0, rxdr->size);
-
- rxdr->next_to_clean = 0;
-@@ -1732,7 +1626,7 @@ setup_rx_desc_die:
-
- /**
- * iegbe_setup_all_rx_resources - wrapper to allocate Rx resources
-- * (Descriptors) for all queues
-+ * (Descriptors) for all queues
- * @adapter: board private structure
- *
- * If this function returns with an error, then it's possible one or
-@@ -1742,21 +1636,23 @@ setup_rx_desc_die:
- * Return 0 on success, negative on failure
- **/
-
--int
--iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
-+int iegbe_setup_all_rx_resources(struct iegbe_adapter *adapter)
- {
- int i, err = 0;
-
-- for (i = 0; i < adapter->num_queues; i++) {
-+ for (i = 0; i < adapter->num_rx_queues; i++) {
- err = iegbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
- if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Rx Queue %u failed\n", i);
-+ for (i-- ; i >= 0; i--)
-+ iegbe_free_rx_resources(adapter,
-+ &adapter->rx_ring[i]);
- break;
- }
- }
-
-- return err;
-+ return err;
- }
-
- /**
-@@ -1765,105 +1661,104 @@ iegbe_setup_all_rx_resources(struct iegb
- **/
- #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
--static void
--iegbe_setup_rctl(struct iegbe_adapter *adapter)
-+static void iegbe_setup_rctl(struct iegbe_adapter *adapter)
- {
-- uint32_t rctl, rfctl;
-- uint32_t psrctl = 0;
--#ifdef CONFIG_E1000_PACKET_SPLIT
-- uint32_t pages = 0;
--#endif
--
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
--
-- rctl &= ~(0x3 << E1000_RCTL_MO_SHIFT);
--
-- rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
-- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-- (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
--
-- if(adapter->hw.tbi_compatibility_on == 0x1) {
-- rctl |= E1000_RCTL_SBP;
-- } else {
-- rctl &= ~E1000_RCTL_SBP;
-- }
-- if(adapter->netdev->mtu <= ETH_DATA_LEN) {
-- rctl &= ~E1000_RCTL_LPE;
-- } else {
-- rctl |= E1000_RCTL_LPE;
-- }
-- /* Setup buffer sizes */
-- if(adapter->hw.mac_type >= iegbe_82571) {
-- /* We can now specify buffers in 1K increments.
-- * BSIZE and BSEX are ignored in this case. */
-- rctl |= adapter->rx_buffer_len << 0x11;
-- } else {
-- rctl &= ~E1000_RCTL_SZ_4096;
-- rctl |= E1000_RCTL_BSEX;
-- switch (adapter->rx_buffer_len) {
-- case E1000_RXBUFFER_2048:
-- default:
-- rctl |= E1000_RCTL_SZ_2048;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u32 rctl, rfctl;
-+ u32 psrctl = 0;
-+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
-+ u32 pages = 0;
-+#endif
-+
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+
-+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
-+
-+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
-+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
-+
-+ if (hw->tbi_compatibility_on == 1)
-+ rctl |= E1000_RCTL_SBP;
-+ else
-+ rctl &= ~E1000_RCTL_SBP;
-+
-+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
-+ rctl &= ~E1000_RCTL_LPE;
-+ else
-+ rctl |= E1000_RCTL_LPE;
-+
-+ /* Setup buffer sizes */
-+ /* We can now specify buffers in 1K increments.
-+ * BSIZE and BSEX are ignored in this case. */
-+ rctl &= ~E1000_RCTL_SZ_4096;
-+ rctl |= E1000_RCTL_BSEX;
-+ switch (adapter->rx_buffer_len) {
-+ case E1000_RXBUFFER_256:
-+ rctl |= E1000_RCTL_SZ_256;
- rctl &= ~E1000_RCTL_BSEX;
- break;
-- case E1000_RXBUFFER_4096:
-- rctl |= E1000_RCTL_SZ_4096;
-- break;
-- case E1000_RXBUFFER_8192:
-- rctl |= E1000_RCTL_SZ_8192;
-- break;
-- case E1000_RXBUFFER_16384:
-- rctl |= E1000_RCTL_SZ_16384;
-- break;
-- }
-- }
-+ case E1000_RXBUFFER_2048:
-+ default:
-+ rctl |= E1000_RCTL_SZ_2048;
-+ rctl &= ~E1000_RCTL_BSEX;
-+ break;
-+ case E1000_RXBUFFER_4096:
-+ rctl |= E1000_RCTL_SZ_4096;
-+ break;
-+ case E1000_RXBUFFER_8192:
-+ rctl |= E1000_RCTL_SZ_8192;
-+ break;
-+ case E1000_RXBUFFER_16384:
-+ rctl |= E1000_RCTL_SZ_16384;
-+ break;
-+ }
-
--#ifdef CONFIG_E1000_PACKET_SPLIT
-- /* 82571 and greater support packet-split where the protocol
-- * header is placed in skb->data and the packet data is
-- * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
-- * In the case of a non-split, skb->data is linearly filled,
-- * followed by the page buffers. Therefore, skb->data is
-- * sized to hold the largest protocol header.
-- */
-- pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-- if ((adapter->hw.mac_type > iegbe_82547_rev_2) && (pages <= 0x3) &&
-- PAGE_SIZE <= 0x4000) {
-- adapter->rx_ps_pages = pages;
-- } else {
-+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
-+ /* 82571 and greater support packet-split where the protocol
-+ * header is placed in skb->data and the packet data is
-+ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
-+ * In the case of a non-split, skb->data is linearly filled,
-+ * followed by the page buffers. Therefore, skb->data is
-+ * sized to hold the largest protocol header.
-+ */
-+ pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-+ if ((hw->mac_type >= iegbe_82571) && (pages <= 3) &&
-+ PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
-+ adapter->rx_ps_pages = pages;
-+ else
- adapter->rx_ps_pages = 0;
-- }
- #endif
-- if (adapter->rx_ps_pages) {
-- /* Configure extra packet-split registers */
-- rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
-- rfctl |= E1000_RFCTL_EXTEN;
-- /* disable IPv6 packet split support */
-- rfctl |= E1000_RFCTL_IPV6_DIS;
-- E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
--
-- rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
--
-- psrctl |= adapter->rx_ps_bsize0 >>
-- E1000_PSRCTL_BSIZE0_SHIFT;
--
-- switch (adapter->rx_ps_pages) {
-- case 0x3:
-- psrctl |= PAGE_SIZE <<
-- E1000_PSRCTL_BSIZE3_SHIFT;
-- case 0x2:
-- psrctl |= PAGE_SIZE <<
-- E1000_PSRCTL_BSIZE2_SHIFT;
-- case 0x1:
-- psrctl |= PAGE_SIZE >>
-- E1000_PSRCTL_BSIZE1_SHIFT;
-- break;
-- }
-+ if (adapter->rx_ps_pages) {
-+ /* Configure extra packet-split registers */
-+ rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
-+ rfctl |= E1000_RFCTL_EXTEN;
-+ /* disable IPv6 packet split support */
-+ rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
-+ E1000_RFCTL_NEW_IPV6_EXT_DIS);
-+
-+ rctl |= E1000_RCTL_DTYP_PS;
-+
-+ psrctl |= adapter->rx_ps_bsize0 >>
-+ E1000_PSRCTL_BSIZE0_SHIFT;
-+
-+ switch (adapter->rx_ps_pages) {
-+ case 3:
-+ psrctl |= PAGE_SIZE <<
-+ E1000_PSRCTL_BSIZE3_SHIFT;
-+ case 2:
-+ psrctl |= PAGE_SIZE <<
-+ E1000_PSRCTL_BSIZE2_SHIFT;
-+ case 1:
-+ psrctl |= PAGE_SIZE >>
-+ E1000_PSRCTL_BSIZE1_SHIFT;
-+ break;
-+ }
-
-- E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
-- }
-+ E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
-+ }
-
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- }
-
- /**
-@@ -1873,145 +1768,87 @@ iegbe_setup_rctl(struct iegbe_adapter *a
- * Configure the Rx unit of the MAC after a reset.
- **/
-
--static void
--iegbe_configure_rx(struct iegbe_adapter *adapter)
-+static void iegbe_configure_rx(struct iegbe_adapter *adapter)
- {
-- uint64_t rdba;
-- struct iegbe_hw *hw = &adapter->hw;
-- uint32_t rdlen, rctl, rxcsum, ctrl_ext;
--#ifdef CONFIG_E1000_MQ
-- uint32_t reta, mrqc;
-- int i;
--#endif
-+ u64 rdba;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u32 rdlen, rctl, rxcsum, ctrl_ext;
-
-- if (adapter->rx_ps_pages) {
-+ if (adapter->rx_ps_pages) {
- rdlen = adapter->rx_ring[0].count *
-- sizeof(union iegbe_rx_desc_packet_split);
-- adapter->clean_rx = iegbe_clean_rx_irq_ps;
-- adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
-- } else {
-+ sizeof(union iegbe_rx_desc_packet_split);
-+ adapter->clean_rx = iegbe_clean_rx_irq_ps;
-+ adapter->alloc_rx_buf = iegbe_alloc_rx_buffers_ps;
-+ } else {
- rdlen = adapter->rx_ring[0].count *
-- sizeof(struct iegbe_rx_desc);
-- adapter->clean_rx = iegbe_clean_rx_irq;
-- adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
-- }
-+ sizeof(struct iegbe_rx_desc);
-+ adapter->clean_rx = iegbe_clean_rx_irq;
-+ adapter->alloc_rx_buf = iegbe_alloc_rx_buffers;
-+ }
-
-- /* disable receives while setting up the descriptors */
-- rctl = E1000_READ_REG(hw, RCTL);
-- E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
-+ /* disable receives while setting up the descriptors */
-+ rctl = E1000_READ_REG(hw, RCTL);
-+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
-
-- /* set the Receive Delay Timer Register */
-- E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
-+ /* set the Receive Delay Timer Register */
-+ E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
-
-- if (hw->mac_type >= iegbe_82540) {
-- E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
-- if(adapter->itr > 0x1) {
-- E1000_WRITE_REG(hw, ITR,
-- 0x3b9aca00 / (adapter->itr * 0x100));
-+ if (hw->mac_type >= iegbe_82540) {
-+ E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
-+ if (adapter->itr_setting != 0)
-+ E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (adapter->itr * 256));
- }
-- }
-
-- if (hw->mac_type >= iegbe_82571) {
-- /* Reset delay timers after every interrupt */
-- ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
-- ctrl_ext |= E1000_CTRL_EXT_CANC;
-- E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-- E1000_WRITE_FLUSH(hw);
-- }
-+ if (hw->mac_type >= iegbe_82571) {
-+ /* Reset delay timers after every interrupt */
-+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
-+ ctrl_ext |= E1000_CTRL_EXT_CANC;
-+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-+ E1000_WRITE_FLUSH(hw);
-+ }
-
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
-- switch (adapter->num_queues) {
--#ifdef CONFIG_E1000_MQ
-- case 0x2:
-- rdba = adapter->rx_ring[0x1].dma;
-- E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
-- E1000_WRITE_REG(hw, RDBAH1, (rdba >> 0x20));
-- E1000_WRITE_REG(hw, RDLEN1, rdlen);
-- E1000_WRITE_REG(hw, RDH1, 0);
-- E1000_WRITE_REG(hw, RDT1, 0);
-- adapter->rx_ring[1].rdh = E1000_RDH1;
-- adapter->rx_ring[1].rdt = E1000_RDT1;
-- /* Fall Through */
--#endif
-- case 0x1:
-- default:
-+ switch (adapter->num_rx_queues) {
-+ case 1:
-+ default:
- rdba = adapter->rx_ring[0].dma;
-- E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-+ E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, RDBAH, (rdba >> 0x20));
-- E1000_WRITE_REG(hw, RDLEN, rdlen);
-- E1000_WRITE_REG(hw, RDH, 0);
-- E1000_WRITE_REG(hw, RDT, 0);
-- adapter->rx_ring[0].rdh = E1000_RDH;
-- adapter->rx_ring[0].rdt = E1000_RDT;
-- break;
-- }
-+ E1000_WRITE_REG(hw, RDLEN, rdlen);
-+ adapter->rx_ring[0].rdh = ((hw->mac_type >= iegbe_82543) ? E1000_RDH : E1000_82542_RDH);
-+ adapter->rx_ring[0].rdt = ((hw->mac_type >= iegbe_82543) ? E1000_RDT : E1000_82542_RDT);
-+ break;
-+ }
-
--#ifdef CONFIG_E1000_MQ
-- if (adapter->num_queues > 0x1) {
-- uint32_t random[0xa];
--
-- get_random_bytes(&random[0], FORTY);
--
-- if (hw->mac_type <= iegbe_82572) {
-- E1000_WRITE_REG(hw, RSSIR, 0);
-- E1000_WRITE_REG(hw, RSSIM, 0);
-- }
-
-- switch (adapter->num_queues) {
-- case 0x2:
-- default:
-- reta = 0x00800080;
-- mrqc = E1000_MRQC_ENABLE_RSS_2Q;
-- break;
-- }
--
-- /* Fill out redirection table */
-- for (i = 0; i < 0x20; i++)
-- E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
-- /* Fill out hash function seeds */
-- for (i = 0; i < 0xa; i++)
-- E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
--
-- mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
-- E1000_MRQC_RSS_FIELD_IPV4_TCP);
-- E1000_WRITE_REG(hw, MRQC, mrqc);
-- }
--
-- /* Multiqueue and packet checksumming are mutually exclusive. */
-- if (hw->mac_type >= iegbe_82571) {
-- rxcsum = E1000_READ_REG(hw, RXCSUM);
-- rxcsum |= E1000_RXCSUM_PCSD;
-- E1000_WRITE_REG(hw, RXCSUM, rxcsum);
-- }
--
--#else
-+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
-+ if (hw->mac_type >= iegbe_82543) {
-+ rxcsum = E1000_READ_REG(hw, RXCSUM);
-+ if(adapter->rx_csum == TRUE) {
-+ rxcsum |= E1000_RXCSUM_TUOFL;
-+
-+ /* Enable 82571 IPv4 payload checksum for UDP fragments
-+ * Must be used in conjunction with packet-split. */
-+ if ((hw->mac_type >= iegbe_82571) &&
-+ (adapter->rx_ps_pages)) {
-+ rxcsum |= E1000_RXCSUM_IPPCSE;
-+ }
-+ } else {
-+ rxcsum &= ~E1000_RXCSUM_TUOFL;
-+ /* don't need to clear IPPCSE as it defaults to 0 */
-+ }
-+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
-+ }
-
-- /* Enable 82543 Receive Checksum Offload for TCP and UDP */
-- if (hw->mac_type >= iegbe_82543) {
-- rxcsum = E1000_READ_REG(hw, RXCSUM);
-- if(adapter->rx_csum == TRUE) {
-- rxcsum |= E1000_RXCSUM_TUOFL;
--
-- /* Enable 82571 IPv4 payload checksum for UDP fragments
-- * Must be used in conjunction with packet-split. */
-- if ((hw->mac_type >= iegbe_82571) &&
-- (adapter->rx_ps_pages)) {
-- rxcsum |= E1000_RXCSUM_IPPCSE;
-- }
-- } else {
-- rxcsum &= ~E1000_RXCSUM_TUOFL;
-- /* don't need to clear IPPCSE as it defaults to 0 */
-- }
-- E1000_WRITE_REG(hw, RXCSUM, rxcsum);
-- }
--#endif /* CONFIG_E1000_MQ */
-+ /* enable early receives on 82573, only takes effect if using > 2048
-+ * byte total frame size. for example only for jumbo frames */
-+#define E1000_ERT_2048 0x100
-+ if (hw->mac_type == iegbe_82573)
-+ E1000_WRITE_REG(&adapter->hw, ERT, E1000_ERT_2048);
-
-- if (hw->mac_type == iegbe_82573) {
-- E1000_WRITE_REG(hw, ERT, 0x0100);
-- }
- /* Enable Receives */
-- E1000_WRITE_REG(hw, RCTL, rctl);
-+ E1000_WRITE_REG(hw, RCTL, rctl);
- }
-
- /**
-@@ -2022,20 +1859,19 @@ iegbe_configure_rx(struct iegbe_adapter
- * Free all transmit software resources
- **/
-
--void
--iegbe_free_tx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_tx_resources(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *tx_ring)
- {
-- struct pci_dev *pdev = adapter->pdev;
-+ struct pci_dev *pdev = adapter->pdev;
-
-- iegbe_clean_tx_ring(adapter, tx_ring);
-+ iegbe_clean_tx_ring(adapter, tx_ring);
-
-- vfree(tx_ring->buffer_info);
-- tx_ring->buffer_info = NULL;
-+ vfree(tx_ring->buffer_info);
-+ tx_ring->buffer_info = NULL;
-
-- pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
-+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
-
-- tx_ring->desc = NULL;
-+ tx_ring->desc = NULL;
- }
-
- /**
-@@ -2048,85 +1884,29 @@ iegbe_free_tx_resources(struct iegbe_ada
- void
- iegbe_free_all_tx_resources(struct iegbe_adapter *adapter)
- {
-- int i;
-+ int i;
-
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0x0; i < adapter->num_tx_queues; i++)
- iegbe_free_tx_resources(adapter, &adapter->tx_ring[i]);
- }
-
- static inline void
- iegbe_unmap_and_free_tx_resource(struct iegbe_adapter *adapter,
-- struct iegbe_buffer *buffer_info)
--{
-- if(buffer_info->dma) {
-- pci_unmap_page(adapter->pdev,
-- buffer_info->dma,
-- buffer_info->length,
-- PCI_DMA_TODEVICE);
-- buffer_info->dma = 0;
-- }
-- if(buffer_info->skb) {
-- dev_kfree_skb_any(buffer_info->skb);
-- buffer_info->skb = NULL;
-- }
--}
--
--#ifdef IEGBE_GBE_WORKAROUND
--/**
-- * iegbe_clean_tx_ring_partial - Free Tx Buffers without using the DD
-- * bit in the descriptor
-- * @adapter: board private structure
-- * @tx_ring: ring to be cleaned
-- **/
--static void iegbe_clean_tx_ring_partial(struct iegbe_adapter *adapter,
-- struct iegbe_tx_ring *tx_ring)
-+ struct iegbe_buffer *buffer_info)
- {
-- struct iegbe_buffer *buffer_info;
-- struct iegbe_tx_desc *tx_desc;
-- struct net_device *netdev = adapter->netdev;
-- unsigned int i;
-- unsigned tail;
-- unsigned head;
-- int cleaned = FALSE;
--
-- tail = readl(adapter->hw.hw_addr + tx_ring->tdt);
-- head = readl(adapter->hw.hw_addr + tx_ring->tdh);
--
-- if (head != tail) {
-- adapter->stats.tx_hnet++;
-- }
-- if (head != tx_ring->next_to_use) {
-- adapter->stats.tx_hnentu++;
-- }
-- /* Free all the Tx ring sk_buffs from next_to_clean up until
-- * the current head pointer
-- */
-- i = tx_ring->next_to_clean;
-- while(i != head) {
-- cleaned = TRUE;
-- tx_desc = E1000_TX_DESC(*tx_ring, i);
--
-- buffer_info = &tx_ring->buffer_info[i];
-- iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
--
-- tx_desc->upper.data = 0;
--
-- if (unlikely(++i == tx_ring->count)) { i = 0; }
--
-- }
-- tx_ring->next_to_clean = head;
--
-- spin_lock(&tx_ring->tx_lock);
--
-- /* Wake up the queue if it's currently stopped */
-- if (unlikely(cleaned && netif_queue_stopped(netdev) &&
-- netif_carrier_ok(netdev))) {
-- netif_wake_queue(netdev);
-+ if(buffer_info->dma) {
-+ pci_unmap_page(adapter->pdev,
-+ buffer_info->dma,
-+ buffer_info->length,
-+ PCI_DMA_TODEVICE);
-+ buffer_info->dma = 0x0;
-+ }
-+ if(buffer_info->skb) {
-+ dev_kfree_skb_any(buffer_info->skb);
-+ buffer_info->skb = NULL;
- }
--
-- spin_unlock(&tx_ring->tx_lock);
- }
--#endif
-+
-
- /**
- * iegbe_clean_tx_ring - Free Tx Buffers
-@@ -2134,38 +1914,34 @@ static void iegbe_clean_tx_ring_partial(
- * @tx_ring: ring to be cleaned
- **/
-
--static void
--iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
-+static void iegbe_clean_tx_ring(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *tx_ring)
- {
-- struct iegbe_buffer *buffer_info;
-- unsigned long size;
-- unsigned int i;
--
-- /* Free all the Tx ring sk_buffs */
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct iegbe_buffer *buffer_info;
-+ unsigned long size;
-+ unsigned int i;
-
-- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
-- iegbe_unmap_and_free_tx_resource(adapter,
-- &tx_ring->previous_buffer_info);
-- }
-+ /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
-- buffer_info = &tx_ring->buffer_info[i];
-- iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
-- }
-+ buffer_info = &tx_ring->buffer_info[i];
-+ iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
-+ }
-
-- size = sizeof(struct iegbe_buffer) * tx_ring->count;
-+ size = sizeof(struct iegbe_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
-- /* Zero out the descriptor ring */
-+ /* Zero out the descriptor ring */
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-+ tx_ring->last_tx_tso = 0;
-
-- writel(0, adapter->hw.hw_addr + tx_ring->tdh);
-- writel(0, adapter->hw.hw_addr + tx_ring->tdt);
-+ writel(0, hw->hw_addr + tx_ring->tdh);
-+ writel(0, hw->hw_addr + tx_ring->tdt);
- }
-
- /**
-@@ -2173,12 +1949,11 @@ iegbe_clean_tx_ring(struct iegbe_adapter
- * @adapter: board private structure
- **/
-
--static void
--iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
-+static void iegbe_clean_all_tx_rings(struct iegbe_adapter *adapter)
- {
-- int i;
-+ int i;
-
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0; i < adapter->num_tx_queues; i++)
- iegbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
- }
-
-@@ -2190,24 +1965,23 @@ iegbe_clean_all_tx_rings(struct iegbe_ad
- * Free all receive software resources
- **/
-
--void
--iegbe_free_rx_resources(struct iegbe_adapter *adapter,
-+static void iegbe_free_rx_resources(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring)
- {
-- struct pci_dev *pdev = adapter->pdev;
-+ struct pci_dev *pdev = adapter->pdev;
-
-- iegbe_clean_rx_ring(adapter, rx_ring);
-+ iegbe_clean_rx_ring(adapter, rx_ring);
-
-- vfree(rx_ring->buffer_info);
-- rx_ring->buffer_info = NULL;
-- kfree(rx_ring->ps_page);
-- rx_ring->ps_page = NULL;
-- kfree(rx_ring->ps_page_dma);
-- rx_ring->ps_page_dma = NULL;
-+ vfree(rx_ring->buffer_info);
-+ rx_ring->buffer_info = NULL;
-+ kfree(rx_ring->ps_page);
-+ rx_ring->ps_page = NULL;
-+ kfree(rx_ring->ps_page_dma);
-+ rx_ring->ps_page_dma = NULL;
-
-- pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
-+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
-
-- rx_ring->desc = NULL;
-+ rx_ring->desc = NULL;
- }
-
- /**
-@@ -2217,12 +1991,11 @@ iegbe_free_rx_resources(struct iegbe_ada
- * Free all receive software resources
- **/
-
--void
--iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
-+void iegbe_free_all_rx_resources(struct iegbe_adapter *adapter)
- {
-- int i;
-+ int i;
-
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0; i < adapter->num_rx_queues; i++)
- iegbe_free_rx_resources(adapter, &adapter->rx_ring[i]);
- }
-
-@@ -2232,60 +2005,59 @@ iegbe_free_all_rx_resources(struct iegbe
- * @rx_ring: ring to free buffers from
- **/
-
--static void
--iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
-+static void iegbe_clean_rx_ring(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring)
- {
-- struct iegbe_buffer *buffer_info;
-- struct iegbe_ps_page *ps_page;
-- struct iegbe_ps_page_dma *ps_page_dma;
-- struct pci_dev *pdev = adapter->pdev;
-- unsigned long size;
-- unsigned int i, j;
--
-- /* Free all the Rx ring sk_buffs */
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct iegbe_buffer *buffer_info;
-+ struct iegbe_ps_page *ps_page;
-+ struct iegbe_ps_page_dma *ps_page_dma;
-+ struct pci_dev *pdev = adapter->pdev;
-+ unsigned long size;
-+ unsigned int i, j;
-+
-+ /* Free all the Rx ring sk_buffs */
-+
-+ for (i = 0; i < rx_ring->count; i++) {
-+ buffer_info = &rx_ring->buffer_info[i];
-+ if(buffer_info->skb) {
-+ pci_unmap_single(pdev,
-+ buffer_info->dma,
-+ buffer_info->length,
-+ PCI_DMA_FROMDEVICE);
-
-- for(i = 0; i < rx_ring->count; i++) {
-- buffer_info = &rx_ring->buffer_info[i];
-- if(buffer_info->skb) {
-- ps_page = &rx_ring->ps_page[i];
-- ps_page_dma = &rx_ring->ps_page_dma[i];
-- pci_unmap_single(pdev,
-- buffer_info->dma,
-- buffer_info->length,
-- PCI_DMA_FROMDEVICE);
--
-- dev_kfree_skb(buffer_info->skb);
-- buffer_info->skb = NULL;
--
-- for(j = 0; j < adapter->rx_ps_pages; j++) {
-- if(!ps_page->ps_page[j]) { break; }
-- pci_unmap_single(pdev,
-- ps_page_dma->ps_page_dma[j],
-- PAGE_SIZE, PCI_DMA_FROMDEVICE);
-- ps_page_dma->ps_page_dma[j] = 0;
-- put_page(ps_page->ps_page[j]);
-- ps_page->ps_page[j] = NULL;
-- }
-+ dev_kfree_skb(buffer_info->skb);
-+ buffer_info->skb = NULL;
- }
-- }
-+ ps_page = &rx_ring->ps_page[i];
-+ ps_page_dma = &rx_ring->ps_page_dma[i];
-+ for (j = 0; j < adapter->rx_ps_pages; j++) {
-+ if (!ps_page->ps_page[j]) break;
-+ pci_unmap_page(pdev,
-+ ps_page_dma->ps_page_dma[j],
-+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+ ps_page_dma->ps_page_dma[j] = 0;
-+ put_page(ps_page->ps_page[j]);
-+ ps_page->ps_page[j] = NULL;
-+ }
-+ }
-
-- size = sizeof(struct iegbe_buffer) * rx_ring->count;
-+ size = sizeof(struct iegbe_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-- size = sizeof(struct iegbe_ps_page) * rx_ring->count;
-+ size = sizeof(struct iegbe_ps_page) * rx_ring->count;
- memset(rx_ring->ps_page, 0, size);
-- size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
-+ size = sizeof(struct iegbe_ps_page_dma) * rx_ring->count;
- memset(rx_ring->ps_page_dma, 0, size);
-
-- /* Zero out the descriptor ring */
-+ /* Zero out the descriptor ring */
-
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
-- writel(0, adapter->hw.hw_addr + rx_ring->rdh);
-- writel(0, adapter->hw.hw_addr + rx_ring->rdt);
-+ writel(0, hw->hw_addr + rx_ring->rdh);
-+ writel(0, hw->hw_addr + rx_ring->rdt);
- }
-
- /**
-@@ -2293,60 +2065,54 @@ iegbe_clean_rx_ring(struct iegbe_adapter
- * @adapter: board private structure
- **/
-
--static void
--iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
-+static void iegbe_clean_all_rx_rings(struct iegbe_adapter *adapter)
- {
-- int i;
-+ int i;
-
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0; i < adapter->num_rx_queues; i++)
- iegbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
- }
-
- /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
- * and memory write and invalidate disabled for certain operations
- */
--static void
--iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
-+static void iegbe_enter_82542_rst(struct iegbe_adapter *adapter)
- {
-- struct net_device *netdev = adapter->netdev;
-- uint32_t rctl;
-+ struct net_device *netdev = adapter->netdev;
-+ uint32_t rctl;
-
-- iegbe_pci_clear_mwi(&adapter->hw);
-+ iegbe_pci_clear_mwi(&adapter->hw);
-
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- rctl |= E1000_RCTL_RST;
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-- E1000_WRITE_FLUSH(&adapter->hw);
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ rctl |= E1000_RCTL_RST;
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ E1000_WRITE_FLUSH(&adapter->hw);
- mdelay(0x5);
-
- if(netif_running(netdev)) {
-- iegbe_clean_all_rx_rings(adapter);
--}
-+ iegbe_clean_all_rx_rings(adapter);
-+ }
- }
-
- static void
- iegbe_leave_82542_rst(struct iegbe_adapter *adapter)
- {
-- struct net_device *netdev = adapter->netdev;
-- uint32_t rctl;
-+ struct net_device *netdev = adapter->netdev;
-+ uint32_t rctl;
-
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- rctl &= ~E1000_RCTL_RST;
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-- E1000_WRITE_FLUSH(&adapter->hw);
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ rctl &= ~E1000_RCTL_RST;
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ E1000_WRITE_FLUSH(&adapter->hw);
- mdelay(0x5);
-
- if(adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE) {
-- iegbe_pci_set_mwi(&adapter->hw);
-+ iegbe_pci_set_mwi(&adapter->hw);
- }
- if(netif_running(netdev)) {
-+ struct iegbe_rx_ring *ring = &adapter->rx_ring[0x0];
- iegbe_configure_rx(adapter);
--#ifdef IEGBE_GBE_WORKAROUND
-- iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0],
-- IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS + 1);
--#else
-- iegbe_alloc_rx_buffers(adapter, &adapter->rx_ring[0]);
--#endif
-+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
- }
- }
-
-@@ -2358,133 +2124,153 @@ iegbe_leave_82542_rst(struct iegbe_adapt
- * Returns 0 on success, negative on failure
- **/
-
--static int
--iegbe_set_mac(struct net_device *netdev, void *p)
-+static int iegbe_set_mac(struct net_device *netdev, void *p)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- struct sockaddr *addr = p;
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct sockaddr *addr = p;
-
- if(!is_valid_ether_addr(addr->sa_data)) {
-- return -EADDRNOTAVAIL;
-+ return -EADDRNOTAVAIL;
- }
-- /* 82542 2.0 needs to be in reset to write receive address registers */
-+ /* 82542 2.0 needs to be in reset to write receive address registers */
-
- if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
-- iegbe_enter_82542_rst(adapter);
-+ iegbe_enter_82542_rst(adapter);
- }
-- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-- memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
-+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
-
-- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
-+ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
-
-- /* With 82571 controllers, LAA may be overwritten (with the default)
-- * due to controller reset from the other port. */
-- if (adapter->hw.mac_type == iegbe_82571) {
-- /* activate the work around */
-+ /* With 82571 controllers, LAA may be overwritten (with the default)
-+ * due to controller reset from the other port. */
-+ if (adapter->hw.mac_type == iegbe_82571) {
-+ /* activate the work around */
- adapter->hw.laa_is_present = 0x1;
-
-- /* Hold a copy of the LAA in RAR[14] This is done so that
-- * between the time RAR[0] gets clobbered and the time it
-- * gets fixed (in iegbe_watchdog), the actual LAA is in one
-- * of the RARs and no incoming packets directed to this port
-- * are dropped. Eventaully the LAA will be in RAR[0] and
-- * RAR[14] */
-- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
-+ /* Hold a copy of the LAA in RAR[14] This is done so that
-+ * between the time RAR[0] gets clobbered and the time it
-+ * gets fixed (in iegbe_watchdog), the actual LAA is in one
-+ * of the RARs and no incoming packets directed to this port
-+ * are dropped. Eventaully the LAA will be in RAR[0] and
-+ * RAR[14] */
-+ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr,
- E1000_RAR_ENTRIES - 0x1);
-- }
-+ }
-
- if(adapter->hw.mac_type == iegbe_82542_rev2_0) {
-- iegbe_leave_82542_rst(adapter);
-+ iegbe_leave_82542_rst(adapter);
- }
-- return 0;
-+ return 0x0;
- }
-
- /**
-- * iegbe_set_multi - Multicast and Promiscuous mode set
-+ * iegbe_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
-- * The set_multi entry point is called whenever the multicast address
-- * list or the network interface flags are updated. This routine is
-- * responsible for configuring the hardware for proper multicast,
-+ * The set_rx_mode entry point is called whenever the unicast or multicast
-+ * address lists or the network interface flags are updated. This routine is
-+ * responsible for configuring the hardware for proper unicast, multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-
--static void
--iegbe_set_multi(struct net_device *netdev)
-+static void iegbe_set_rx_mode(struct net_device *netdev)
- {
- struct iegbe_adapter *adapter = netdev_priv(netdev);
- struct iegbe_hw *hw = &adapter->hw;
-- struct dev_mc_list *mc_ptr;
-- uint32_t rctl;
-- uint32_t hash_value;
-+ struct dev_addr_list *uc_ptr;
-+ struct dev_addr_list *mc_ptr;
-+ u32 rctl;
-+ u32 hash_value;
- int i, rar_entries = E1000_RAR_ENTRIES;
-+int mta_reg_count = E1000_NUM_MTA_REGISTERS;
-
- /* reserve RAR[14] for LAA over-write work-around */
-- if (adapter->hw.mac_type == iegbe_82571) {
-+ if (hw->mac_type == iegbe_82571)
- rar_entries--;
-- }
-+
- /* Check for Promiscuous and All Multicast modes */
-
-- rctl = E1000_READ_REG(hw, RCTL);
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-- } else if (netdev->flags & IFF_ALLMULTI) {
-- rctl |= E1000_RCTL_MPE;
-- rctl &= ~E1000_RCTL_UPE;
-+ rctl &= ~E1000_RCTL_VFE;
- } else {
-- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
-+ if (netdev->flags & IFF_ALLMULTI) {
-+ rctl |= E1000_RCTL_MPE;
-+ } else {
-+ rctl &= ~E1000_RCTL_MPE;
-+ }
-+ }
-+
-+ uc_ptr = NULL;
-+ if (netdev->uc_count > rar_entries - 1) {
-+ rctl |= E1000_RCTL_UPE;
-+ } else if (!(netdev->flags & IFF_PROMISC)) {
-+ rctl &= ~E1000_RCTL_UPE;
-+ uc_ptr = netdev->uc_list;
- }
-
-- E1000_WRITE_REG(hw, RCTL, rctl);
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-
- /* 82542 2.0 needs to be in reset to write receive address registers */
-
-- if (hw->mac_type == iegbe_82542_rev2_0) {
-+ if (hw->mac_type == iegbe_82542_rev2_0)
- iegbe_enter_82542_rst(adapter);
-- }
-- /* load the first 14 multicast address into the exact filters 1-14
-+
-+ /* load the first 14 addresses into the exact filters 1-14. Unicast
-+ * addresses take precedence to avoid disabling unicast filtering
-+ * when possible.
-+ *
- * RAR 0 is used for the station MAC adddress
- * if there are not 14 addresses, go ahead and clear the filters
- * -- with 82571 controllers only 0-13 entries are filled here
- */
- mc_ptr = netdev->mc_list;
-
-- for (i = 0x1; i < rar_entries; i++) {
-- if (mc_ptr) {
-- iegbe_rar_set(hw, mc_ptr->dmi_addr, i);
-+ for (i = 1; i < rar_entries; i++) {
-+ if (uc_ptr) {
-+ iegbe_rar_set(hw, uc_ptr->da_addr, i);
-+ uc_ptr = uc_ptr->next;
-+ } else if (mc_ptr) {
-+ iegbe_rar_set(hw, mc_ptr->da_addr, i);
- mc_ptr = mc_ptr->next;
- } else {
-- E1000_WRITE_REG_ARRAY(hw, RA, i << 0x1, 0);
-- E1000_WRITE_REG_ARRAY(hw, RA, (i << 0x1) + 0x1, 0);
-+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
-+ E1000_WRITE_FLUSH(&adapter->hw);
-+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
-+ E1000_WRITE_FLUSH(&adapter->hw);
- }
- }
-+ WARN_ON(uc_ptr != NULL);
-
- /* clear the old settings from the multicast hash table */
-
-- for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
-+ for (i = 0; i < mta_reg_count; i++) {
- E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
-+ E1000_WRITE_FLUSH(&adapter->hw);
-+ }
-
- /* load any remaining addresses into the hash table */
-
- for (; mc_ptr; mc_ptr = mc_ptr->next) {
-- hash_value = iegbe_hash_mc_addr(hw, mc_ptr->dmi_addr);
-+ hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
- iegbe_mta_set(hw, hash_value);
- }
-
-- if (hw->mac_type == iegbe_82542_rev2_0) {
-+ if (hw->mac_type == iegbe_82542_rev2_0)
- iegbe_leave_82542_rst(adapter);
- }
--}
-
- /* Need to wait a few seconds after link up to get diagnostic information from
- * the phy */
-
--static void
--iegbe_update_phy_info(unsigned long data)
-+static void iegbe_update_phy_info(unsigned long data)
- {
-- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-- iegbe_phy_get_info(&adapter->hw, &adapter->phy_info);
-+ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ iegbe_phy_get_info(hw, &adapter->phy_info);
- }
-
- /**
-@@ -2492,54 +2278,54 @@ iegbe_update_phy_info(unsigned long data
- * @data: pointer to adapter cast into an unsigned long
- **/
-
--static void
--iegbe_82547_tx_fifo_stall(unsigned long data)
-+static void iegbe_82547_tx_fifo_stall(unsigned long data)
- {
-- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-- struct net_device *netdev = adapter->netdev;
-- uint32_t tctl;
-+ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+ struct net_device *netdev = adapter->netdev;
-+ u32 tctl;
-
-- if(atomic_read(&adapter->tx_fifo_stall)) {
-- if((E1000_READ_REG(&adapter->hw, TDT) ==
-- E1000_READ_REG(&adapter->hw, TDH)) &&
-- (E1000_READ_REG(&adapter->hw, TDFT) ==
-- E1000_READ_REG(&adapter->hw, TDFH)) &&
-- (E1000_READ_REG(&adapter->hw, TDFTS) ==
-- E1000_READ_REG(&adapter->hw, TDFHS))) {
-- tctl = E1000_READ_REG(&adapter->hw, TCTL);
-- E1000_WRITE_REG(&adapter->hw, TCTL,
-- tctl & ~E1000_TCTL_EN);
-- E1000_WRITE_REG(&adapter->hw, TDFT,
-- adapter->tx_head_addr);
-- E1000_WRITE_REG(&adapter->hw, TDFH,
-- adapter->tx_head_addr);
-- E1000_WRITE_REG(&adapter->hw, TDFTS,
-- adapter->tx_head_addr);
-- E1000_WRITE_REG(&adapter->hw, TDFHS,
-- adapter->tx_head_addr);
-- E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-- E1000_WRITE_FLUSH(&adapter->hw);
--
-- adapter->tx_fifo_head = 0;
-- atomic_set(&adapter->tx_fifo_stall, 0);
-- netif_wake_queue(netdev);
-- } else {
-+ if(atomic_read(&adapter->tx_fifo_stall)) {
-+ if((E1000_READ_REG(&adapter->hw, TDT) ==
-+ E1000_READ_REG(&adapter->hw, TDH)) &&
-+ (E1000_READ_REG(&adapter->hw, TDFT) ==
-+ E1000_READ_REG(&adapter->hw, TDFH)) &&
-+ (E1000_READ_REG(&adapter->hw, TDFTS) ==
-+ E1000_READ_REG(&adapter->hw, TDFHS))) {
-+ tctl = E1000_READ_REG(&adapter->hw, TCTL);
-+ E1000_WRITE_REG(&adapter->hw, TCTL,
-+ tctl & ~E1000_TCTL_EN);
-+ E1000_WRITE_REG(&adapter->hw, TDFT,
-+ adapter->tx_head_addr);
-+ E1000_WRITE_REG(&adapter->hw, TDFH,
-+ adapter->tx_head_addr);
-+ E1000_WRITE_REG(&adapter->hw, TDFTS,
-+ adapter->tx_head_addr);
-+ E1000_WRITE_REG(&adapter->hw, TDFHS,
-+ adapter->tx_head_addr);
-+ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-+ E1000_WRITE_FLUSH(&adapter->hw);
-+
-+ adapter->tx_fifo_head = 0x0;
-+ atomic_set(&adapter->tx_fifo_stall, 0x0);
-+ netif_wake_queue(netdev);
-+ } else {
- mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 0x1);
-- }
-- }
-+ }
-+ }
- }
-
-+
- /**
- * iegbe_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
--static void
--iegbe_watchdog(unsigned long data)
-+static void iegbe_watchdog(unsigned long data)
- {
-- struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-- struct net_device *netdev = adapter->netdev;
-- struct iegbe_tx_ring *txdr = &adapter->tx_ring[0];
-- uint32_t link;
-+ struct iegbe_adapter *adapter = (struct iegbe_adapter *) data;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct iegbe_tx_ring *txdr = adapter->tx_ring;
-+ u32 link, tctl;
-
- /*
- * Test the PHY for link status on icp_xxxx MACs.
-@@ -2547,123 +2333,305 @@ iegbe_watchdog(unsigned long data)
- * in the adapter->hw structure, then set hw->get_link_status = 1
- */
- if(adapter->hw.mac_type == iegbe_icp_xxxx) {
-- int isUp = 0;
-+ int isUp = 0x0;
- int32_t ret_val;
-
- ret_val = iegbe_oem_phy_is_link_up(&adapter->hw, &isUp);
- if(ret_val != E1000_SUCCESS) {
-- isUp = 0;
-- }
-+ isUp = 0x0;
-+ }
- if(isUp != adapter->hw.icp_xxxx_is_link_up) {
- adapter->hw.get_link_status = 0x1;
- }
- }
-
-- iegbe_check_for_link(&adapter->hw);
-- if (adapter->hw.mac_type == iegbe_82573) {
-- iegbe_enable_tx_pkt_filtering(&adapter->hw);
-+ iegbe_check_for_link(&adapter->hw);
-+ if (adapter->hw.mac_type == iegbe_82573) {
-+ iegbe_enable_tx_pkt_filtering(&adapter->hw);
- #ifdef NETIF_F_HW_VLAN_TX
- if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) {
-- iegbe_update_mng_vlan(adapter);
-+ iegbe_update_mng_vlan(adapter);
- }
- #endif
-- }
-+ }
-
-- if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
-- !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
-- link = !adapter->hw.serdes_link_down;
-- } else {
-+ if ((adapter->hw.media_type == iegbe_media_type_internal_serdes) &&
-+ !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) {
-+ link = !adapter->hw.serdes_link_down;
-+ } else {
-
-- if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-- link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
-- } else {
-- int isUp = 0;
-+ if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-+ link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
-+ } else {
-+ int isUp = 0x0;
- if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
-- isUp = 0;
-+ isUp = 0x0;
- }
-- link = isUp;
-- }
-- }
-+ link = isUp;
-+ }
-+ }
-
-- if (link) {
-- if (!netif_carrier_ok(netdev)) {
-- iegbe_get_speed_and_duplex(&adapter->hw,
-- &adapter->link_speed,
-- &adapter->link_duplex);
--
-- DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
-- adapter->link_speed,
-- adapter->link_duplex == FULL_DUPLEX ?
-- "Full Duplex" : "Half Duplex");
-+ if (link) {
-+ if (!netif_carrier_ok(netdev)) {
-+ u32 ctrl;
-+ bool txb2b = true;
-+ iegbe_get_speed_and_duplex(hw,
-+ &adapter->link_speed,
-+ &adapter->link_duplex);
-
-- netif_carrier_on(netdev);
-- netif_wake_queue(netdev);
-- mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
-+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+ DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
-+ "Flow Control: %s\n",
-+ adapter->link_speed,
-+ adapter->link_duplex == FULL_DUPLEX ?
-+ "Full Duplex" : "Half Duplex",
-+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
-+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
-+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
-+ E1000_CTRL_TFCE) ? "TX" : "None" )));
-+
-+ /* tweak tx_queue_len according to speed/duplex
-+ * and adjust the timeout factor */
-+ netdev->tx_queue_len = adapter->tx_queue_len;
-+ adapter->tx_timeout_factor = 1;
-+ switch (adapter->link_speed) {
-+ case SPEED_10:
-+ txb2b = false;
-+ netdev->tx_queue_len = 10;
-+ adapter->tx_timeout_factor = 8;
-+ break;
-+ case SPEED_100:
-+ txb2b = false;
-+ netdev->tx_queue_len = 100;
-+ break;
-+ }
-+ if ((hw->mac_type == iegbe_82571 ||
-+ hw->mac_type == iegbe_82572) &&
-+ !txb2b) {
-+ u32 tarc0;
-+ tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
-+ tarc0 &= ~(1 << 21);
-+ E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
-+ }
-+ /* disable TSO for pcie and 10/100 speeds, to avoid
-+ * some hardware issues */
-+ if (!adapter->tso_force &&
-+ hw->bus_type == iegbe_bus_type_pci_express){
-+ switch (adapter->link_speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ DPRINTK(PROBE,INFO,
-+ "10/100 speed: disabling TSO\n");
-+ netdev->features &= ~NETIF_F_TSO;
-+ netdev->features &= ~NETIF_F_TSO6;
-+ break;
-+ case SPEED_1000:
-+ netdev->features |= NETIF_F_TSO;
-+ netdev->features |= NETIF_F_TSO6;
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+ tctl = E1000_READ_REG(&adapter->hw, TCTL);
-+ tctl |= E1000_TCTL_EN;
-+ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-+ netif_carrier_on(netdev);
-+ netif_wake_queue(netdev);
-+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
- adapter->smartspeed = 0;
-+ } else {
-+ if (hw->rx_needs_kicking) {
-+ u32 rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl | E1000_RCTL_EN);
-+ }
- }
-- } else {
-- if (netif_carrier_ok(netdev)) {
-+ } else {
-+ if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-- DPRINTK(LINK, INFO, "NIC Link is Down\n");
-- netif_carrier_off(netdev);
-- netif_stop_queue(netdev);
-- mod_timer(&adapter->phy_info_timer, jiffies + 0x2 * HZ);
-- }
-+ DPRINTK(LINK, INFO, "NIC Link is Down\n");
-+ netif_carrier_off(netdev);
-+ netif_stop_queue(netdev);
-+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
-+ }
-
-- iegbe_smartspeed(adapter);
-- }
-+ iegbe_smartspeed(adapter);
-+ }
-+
-+ iegbe_update_stats(adapter);
-+
-+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
-+ adapter->tpt_old = adapter->stats.tpt;
-+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
-+ adapter->colc_old = adapter->stats.colc;
-+
-+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
-+ adapter->gorcl_old = adapter->stats.gorcl;
-+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
-+ adapter->gotcl_old = adapter->stats.gotcl;
-+
-+ iegbe_update_adaptive(hw);
-+
-+ if (!netif_carrier_ok(netdev)) {
-+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
-+ /* We've lost link, so the controller stops DMA,
-+ * but we've got queued Tx work that's never going
-+ * to get done, so reset controller to flush Tx.
-+ * (Do the reset outside of interrupt context). */
-+ adapter->tx_timeout_count++;
-+ schedule_work(&adapter->reset_task);
-+ }
-+ }
-+
-+ /* Cause software interrupt to ensure rx ring is cleaned */
-+ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
-+
-+ /* Force detection of hung controller every watchdog period */
-+ adapter->detect_tx_hung = TRUE;
-+
-+ /* With 82571 controllers, LAA may be overwritten due to controller
-+ * reset from the other port. Set the appropriate LAA in RAR[0] */
-+ if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
-+ iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0x0);
-+ }
-+ /* Reset the timer */
-+ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
-+}
-+
-+enum latency_range {
-+ lowest_latency = 0,
-+ low_latency = 1,
-+ bulk_latency = 2,
-+ latency_invalid = 255
-+};
-
-- iegbe_update_stats(adapter);
-+/**
-+ * iegbe_update_itr - update the dynamic ITR value based on statistics
-+ * Stores a new ITR value based on packets and byte
-+ * counts during the last interrupt. The advantage of per interrupt
-+ * computation is faster updates and more accurate ITR for the current
-+ * traffic pattern. Constants in this function were computed
-+ * based on theoretical maximum wire speed and thresholds were set based
-+ * on testing data as well as attempting to minimize response time
-+ * while increasing bulk throughput.
-+ * this functionality is controlled by the InterruptThrottleRate module
-+ * parameter (see iegbe_param.c)
-+ * @adapter: pointer to adapter
-+ * @itr_setting: current adapter->itr
-+ * @packets: the number of packets during this measurement interval
-+ * @bytes: the number of bytes during this measurement interval
-+ **/
-+static unsigned int iegbe_update_itr(struct iegbe_adapter *adapter,
-+ u16 itr_setting, int packets, int bytes)
-+{
-+ unsigned int retval = itr_setting;
-+ struct iegbe_hw *hw = &adapter->hw;
-
-- adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
-- adapter->tpt_old = adapter->stats.tpt;
-- adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
-- adapter->colc_old = adapter->stats.colc;
--
-- adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
-- adapter->gorcl_old = adapter->stats.gorcl;
-- adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
-- adapter->gotcl_old = adapter->stats.gotcl;
--
-- iegbe_update_adaptive(&adapter->hw);
--
-- if (adapter->num_queues == 0x1 && !netif_carrier_ok(netdev)) {
-- if (E1000_DESC_UNUSED(txdr) + 0x1 < txdr->count) {
-- /* We've lost link, so the controller stops DMA,
-- * but we've got queued Tx work that's never going
-- * to get done, so reset controller to flush Tx.
-- * (Do the reset outside of interrupt context). */
-- schedule_work(&adapter->tx_timeout_task);
-+ if (unlikely(hw->mac_type < iegbe_82540))
-+ goto update_itr_done;
-+
-+ if (packets == 0)
-+ goto update_itr_done;
-+
-+ switch (itr_setting) {
-+ case lowest_latency:
-+ /* jumbo frames get bulk treatment*/
-+ if (bytes/packets > 8000)
-+ retval = bulk_latency;
-+ else if ((packets < 5) && (bytes > 512))
-+ retval = low_latency;
-+ break;
-+ case low_latency: /* 50 usec aka 20000 ints/s */
-+ if (bytes > 10000) {
-+ /* jumbo frames need bulk latency setting */
-+ if (bytes/packets > 8000)
-+ retval = bulk_latency;
-+ else if ((packets < 10) || ((bytes/packets) > 1200))
-+ retval = bulk_latency;
-+ else if ((packets > 35))
-+ retval = lowest_latency;
-+ } else if (bytes/packets > 2000)
-+ retval = bulk_latency;
-+ else if (packets <= 2 && bytes < 512)
-+ retval = lowest_latency;
-+ break;
-+ case bulk_latency: /* 250 usec aka 4000 ints/s */
-+ if (bytes > 25000) {
-+ if (packets > 35)
-+ retval = low_latency;
-+ } else if (bytes < 6000) {
-+ retval = low_latency;
- }
-+ break;
- }
-
-- /* Dynamic mode for Interrupt Throttle Rate (ITR) */
-- if (adapter->hw.mac_type >= iegbe_82540 && adapter->itr == 0x1) {
-- /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
-- * asymmetrical Tx or Rx gets ITR=8000; everyone
-- * else is between 2000-8000. */
-- uint32_t goc = (adapter->gotcl + adapter->gorcl) / 0x2710;
-- uint32_t dif = (adapter->gotcl > adapter->gorcl ?
-- adapter->gotcl - adapter->gorcl :
-- adapter->gorcl - adapter->gotcl) / 0x2710;
-- uint32_t itr = goc > 0 ? (dif * 0x1770 / goc + 0x7d0) : 0x1f40;
-- E1000_WRITE_REG(&adapter->hw, ITR, 0x3b9aca00 / (itr * 0x100));
-- }
-+update_itr_done:
-+ return retval;
-+}
-
-- /* Cause software interrupt to ensure rx ring is cleaned */
-- E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
-+static void iegbe_set_itr(struct iegbe_adapter *adapter)
-+{
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u16 current_itr;
-+ u32 new_itr = adapter->itr;
-
-- /* Force detection of hung controller every watchdog period */
-- adapter->detect_tx_hung = TRUE;
-+ if (unlikely(hw->mac_type < iegbe_82540))
-+ return;
-
-- /* With 82571 controllers, LAA may be overwritten due to controller
-- * reset from the other port. Set the appropriate LAA in RAR[0] */
-- if (adapter->hw.mac_type == iegbe_82571 && adapter->hw.laa_is_present) {
-- iegbe_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
-- }
-- /* Reset the timer */
-- mod_timer(&adapter->watchdog_timer, jiffies + 0x2 * HZ);
-+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
-+ if (unlikely(adapter->link_speed != SPEED_1000)) {
-+ current_itr = 0;
-+ new_itr = 4000;
-+ goto set_itr_now;
-+ }
-+
-+ adapter->tx_itr = iegbe_update_itr(adapter,
-+ adapter->tx_itr,
-+ adapter->total_tx_packets,
-+ adapter->total_tx_bytes);
-+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
-+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
-+ adapter->tx_itr = low_latency;
-+
-+ adapter->rx_itr = iegbe_update_itr(adapter,
-+ adapter->rx_itr,
-+ adapter->total_rx_packets,
-+ adapter->total_rx_bytes);
-+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
-+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
-+ adapter->rx_itr = low_latency;
-+
-+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
-+
-+ switch (current_itr) {
-+ /* counts and packets in update_itr are dependent on these numbers */
-+ case lowest_latency:
-+ new_itr = 70000;
-+ break;
-+ case low_latency:
-+ new_itr = 20000; /* aka hwitr = ~200 */
-+ break;
-+ case bulk_latency:
-+ new_itr = 4000;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+set_itr_now:
-+ if (new_itr != adapter->itr) {
-+ /* this attempts to bias the interrupt rate towards Bulk
-+ * by adding intermediate steps when interrupt rate is
-+ * increasing */
-+ new_itr = new_itr > adapter->itr ?
-+ min(adapter->itr + (new_itr >> 2), new_itr) :
-+ new_itr;
-+ adapter->itr = new_itr;
-+ E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (new_itr * 256));
-+ }
-+
-+ return;
- }
-
- #define E1000_TX_FLAGS_CSUM 0x00000001
-@@ -2673,55 +2641,48 @@ iegbe_watchdog(unsigned long data)
- #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
- #define E1000_TX_FLAGS_VLAN_SHIFT 16
-
--static inline int
--iegbe_tso(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
-- struct sk_buff *skb)
-+static int iegbe_tso(struct iegbe_adapter *adapter,
-+ struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
- {
--#ifdef NETIF_F_TSO
- struct iegbe_context_desc *context_desc;
-+ struct iegbe_buffer *buffer_info;
- unsigned int i;
-- uint32_t cmd_length = 0;
-- uint16_t ipcse = 0, tucse, mss;
-- uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
-+ u32 cmd_length = 0;
-+ u16 ipcse = 0, tucse, mss;
-+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
- int err;
-
- if (skb_is_gso(skb)) {
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-- if (err) {
-+ if (err)
- return err;
- }
-- }
-
-- hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
-+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- mss = skb_shinfo(skb)->gso_size;
- if (skb->protocol == htons(ETH_P_IP)) {
-- skb->nh.iph->tot_len = 0;
-- skb->nh.iph->check = 0;
-- skb->h.th->check =
-- ~csum_tcpudp_magic(skb->nh.iph->saddr,
-- skb->nh.iph->daddr,
-- 0,
-- IPPROTO_TCP,
-- 0);
-+ struct iphdr *iph = ip_hdr(skb);
-+ iph->tot_len = 0;
-+ iph->check = 0;
-+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-+ iph->daddr, 0,
-+ IPPROTO_TCP,
-+ 0);
- cmd_length = E1000_TXD_CMD_IP;
-- ipcse = skb->h.raw - skb->data - 0x1;
--#ifdef NETIF_F_TSO_IPV6
-- } else if (skb->protocol == ntohs(ETH_P_IPV6)) {
-- skb->nh.ipv6h->payload_len = 0;
-- skb->h.th->check =
-- ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
-- &skb->nh.ipv6h->daddr,
-- 0,
-- IPPROTO_TCP,
-- 0);
-+ ipcse = skb_transport_offset(skb) - 1;
-+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
-+ ipv6_hdr(skb)->payload_len = 0;
-+ tcp_hdr(skb)->check =
-+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-+ &ipv6_hdr(skb)->daddr,
-+ 0, IPPROTO_TCP, 0);
- ipcse = 0;
--#endif
- }
-- ipcss = skb->nh.raw - skb->data;
-- ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
-- tucss = skb->h.raw - skb->data;
-- tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
-+ ipcss = skb_network_offset(skb);
-+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
-+ tucss = skb_transport_offset(skb);
-+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- tucse = 0;
-
- cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
-@@ -2729,6 +2690,7 @@ iegbe_tso(struct iegbe_adapter *adapter,
-
- i = tx_ring->next_to_use;
- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-+ buffer_info = &tx_ring->buffer_info[i];
-
- context_desc->lower_setup.ip_fields.ipcss = ipcss;
- context_desc->lower_setup.ip_fields.ipcso = ipcso;
-@@ -2740,205 +2702,218 @@ iegbe_tso(struct iegbe_adapter *adapter,
- context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
- context_desc->cmd_and_length = cpu_to_le32(cmd_length);
-
-- if (++i == tx_ring->count) { i = 0; }
-+ buffer_info->time_stamp = jiffies;
-+ buffer_info->next_to_watch = i;
-+
-+ if (++i == tx_ring->count) i = 0;
- tx_ring->next_to_use = i;
-
-- return TRUE;
-+ return true;
- }
--#endif
--
-- return FALSE;
-+ return false;
- }
-
--static inline boolean_t
--iegbe_tx_csum(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
-- struct sk_buff *skb)
-+static bool iegbe_tx_csum(struct iegbe_adapter *adapter,
-+ struct iegbe_tx_ring *tx_ring, struct sk_buff *skb)
- {
- struct iegbe_context_desc *context_desc;
-+ struct iegbe_buffer *buffer_info;
- unsigned int i;
-- uint8_t css;
-+ u8 css;
-
-- if (likely(skb->ip_summed == CHECKSUM_HW)) {
-- css = skb->h.raw - skb->data;
-+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
-+ css = skb_transport_offset(skb);
-
-- i = tx_ring->next_to_use;
-- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-+ i = tx_ring->next_to_use;
-+ buffer_info = &tx_ring->buffer_info[i];
-+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-
-+ context_desc->lower_setup.ip_config = 0;
- context_desc->upper_setup.tcp_fields.tucss = css;
-- context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
-+ context_desc->upper_setup.tcp_fields.tucso =
-+ css + skb->csum_offset;
- context_desc->upper_setup.tcp_fields.tucse = 0;
- context_desc->tcp_seg_setup.data = 0;
- context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
-
-- if (unlikely(++i == tx_ring->count)) { i = 0; }
-+ buffer_info->time_stamp = jiffies;
-+ buffer_info->next_to_watch = i;
-+
-+ if (unlikely(++i == tx_ring->count)) i = 0;
- tx_ring->next_to_use = i;
-
-- return TRUE;
-+ return true;
- }
-
-- return FALSE;
-+ return false;
- }
-
--#define E1000_MAX_TXD_PWR 12
--#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
-+#define E1000_MAX_TXD_PWR 12
-+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
-
--static inline int
--iegbe_tx_map(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
-- struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
-- unsigned int nr_frags, unsigned int mss)
-+static int iegbe_tx_map(struct iegbe_adapter *adapter,
-+ struct iegbe_tx_ring *tx_ring,
-+ struct sk_buff *skb, unsigned int first,
-+ unsigned int max_per_txd, unsigned int nr_frags,
-+ unsigned int mss)
- {
-- struct iegbe_buffer *buffer_info;
-- unsigned int len = skb->len;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct iegbe_buffer *buffer_info;
-+ unsigned int len = skb->len;
- unsigned int offset = 0, size, count = 0, i;
--#ifdef MAX_SKB_FRAGS
-- unsigned int f;
-- len -= skb->data_len;
--#endif
-+ unsigned int f;
-+ len -= skb->data_len;
-
-- i = tx_ring->next_to_use;
-+ i = tx_ring->next_to_use;
-+
-+ while(len) {
-+ buffer_info = &tx_ring->buffer_info[i];
-+ size = min(len, max_per_txd);
-+ /* Workaround for Controller erratum --
-+ * descriptor for non-tso packet in a linear SKB that follows a
-+ * tso gets written back prematurely before the data is fully
-+ * DMA'd to the controller */
-+ if (!skb->data_len && tx_ring->last_tx_tso &&
-+ !skb_is_gso(skb)) {
-+ tx_ring->last_tx_tso = 0;
-+ size -= 4;
-+ }
-
-- while(len) {
-- buffer_info = &tx_ring->buffer_info[i];
-- size = min(len, max_per_txd);
--#ifdef NETIF_F_TSO
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
-- if(unlikely(mss && !nr_frags && size == len && size > 0x8)) {
-- size -= 0x4;
-+ if (unlikely(mss && !nr_frags && size == len && size > 8))
-+ size -= 4;
-+ /* work-around for errata 10 and it applies
-+ * to all controllers in PCI-X mode
-+ * The fix is to make sure that the first descriptor of a
-+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
-+ */
-+ if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
-+ (size > 2015) && count == 0))
-+ size = 2015;
-+
-+ /* Workaround for potential 82544 hang in PCI-X. Avoid
-+ * terminating buffers within evenly-aligned dwords. */
-+ if(unlikely(adapter->pcix_82544 &&
-+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
-+ size > 4))
-+ size -= 4;
-+
-+ buffer_info->length = size;
-+ buffer_info->dma =
-+ pci_map_single(adapter->pdev,
-+ skb->data + offset,
-+ size,
-+ PCI_DMA_TODEVICE);
-+ buffer_info->time_stamp = jiffies;
-+ buffer_info->next_to_watch = i;
-+
-+ len -= size;
-+ offset += size;
-+ count++;
-+ if (unlikely(++i == tx_ring->count)) i = 0;
-+ }
-+
-+ for (f = 0; f < nr_frags; f++) {
-+ struct skb_frag_struct *frag;
-+
-+ frag = &skb_shinfo(skb)->frags[f];
-+ len = frag->size;
-+ offset = frag->page_offset;
-+
-+ while(len) {
-+ buffer_info = &tx_ring->buffer_info[i];
-+ size = min(len, max_per_txd);
-+ /* Workaround for premature desc write-backs
-+ * in TSO mode. Append 4-byte sentinel desc */
-+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
-+ size -= 4;
-+ /* Workaround for potential 82544 hang in PCI-X.
-+ * Avoid terminating buffers within evenly-aligned
-+ * dwords. */
-+ if(unlikely(adapter->pcix_82544 &&
-+ !((unsigned long)(frag->page+offset+size-1) & 4) &&
-+ size > 4))
-+ size -= 4;
-+
-+ buffer_info->length = size;
-+ buffer_info->dma =
-+ pci_map_page(adapter->pdev,
-+ frag->page,
-+ offset,
-+ size,
-+ PCI_DMA_TODEVICE);
-+ buffer_info->time_stamp = jiffies;
-+ buffer_info->next_to_watch = i;
-+
-+ len -= size;
-+ offset += size;
-+ count++;
-+ if (unlikely(++i == tx_ring->count)) i = 0;
- }
--#endif
-- /* work-around for errata 10 and it applies
-- * to all controllers in PCI-X mode
-- * The fix is to make sure that the first descriptor of a
-- * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
-- */
-- if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
-- (size > 0x7df) && count == 0)) {
-- size = 0x7df;
-- }
-- /* Workaround for potential 82544 hang in PCI-X. Avoid
-- * terminating buffers within evenly-aligned dwords. */
-- if(unlikely(adapter->pcix_82544 &&
-- !((unsigned long)(skb->data + offset + size - 0x8) & 0x4) &&
-- size > 0x4)) {
-- size -= 0x4;
-- }
-- buffer_info->length = size;
-- buffer_info->dma =
-- pci_map_single(adapter->pdev,
-- skb->data + offset,
-- size,
-- PCI_DMA_TODEVICE);
-- buffer_info->time_stamp = jiffies;
--
-- len -= size;
-- offset += size;
-- count++;
-- if(unlikely(++i == tx_ring->count)) { i = 0; }
-- }
--
--#ifdef MAX_SKB_FRAGS
-- for(f = 0; f < nr_frags; f++) {
-- struct skb_frag_struct *frag;
--
-- frag = &skb_shinfo(skb)->frags[f];
-- len = frag->size;
-- offset = frag->page_offset;
--
-- while(len) {
-- buffer_info = &tx_ring->buffer_info[i];
-- size = min(len, max_per_txd);
--#ifdef NETIF_F_TSO
-- /* Workaround for premature desc write-backs
-- * in TSO mode. Append 4-byte sentinel desc */
-- if(unlikely(mss && f == (nr_frags-0x1) &&
-- size == len && size > 0x8)) {
-- size -= 0x4;
-- }
--#endif
-- /* Workaround for potential 82544 hang in PCI-X.
-- * Avoid terminating buffers within evenly-aligned
-- * dwords. */
-- if(unlikely(adapter->pcix_82544 &&
-- !((unsigned long)(frag->page+offset+size-0x1) & 0x4) &&
-- size > 0x4)) {
-- size -= 0x4;
-- }
-- buffer_info->length = size;
-- buffer_info->dma =
-- pci_map_page(adapter->pdev,
-- frag->page,
-- offset,
-- size,
-- PCI_DMA_TODEVICE);
-- buffer_info->time_stamp = jiffies;
--
-- len -= size;
-- offset += size;
-- count++;
-- if(unlikely(++i == tx_ring->count)) { i = 0; }
-- }
-- }
--#endif
-+ }
-
-- i = (i == 0) ? tx_ring->count - 0x1 : i - 0x1;
-- tx_ring->buffer_info[i].skb = skb;
-- tx_ring->buffer_info[first].next_to_watch = i;
-+ i = (i == 0) ? tx_ring->count - 1 : i - 1;
-+ tx_ring->buffer_info[i].skb = skb;
-+ tx_ring->buffer_info[first].next_to_watch = i;
-
-- return count;
-+ return count;
- }
-
--static inline void
--iegbe_tx_queue(struct iegbe_adapter *adapter, struct iegbe_tx_ring *tx_ring,
-- int tx_flags, int count)
-+static void iegbe_tx_queue(struct iegbe_adapter *adapter,
-+ struct iegbe_tx_ring *tx_ring, int tx_flags,
-+ int count)
- {
-+ struct iegbe_hw *hw = &adapter->hw;
- struct iegbe_tx_desc *tx_desc = NULL;
- struct iegbe_buffer *buffer_info;
-- uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
-+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
- unsigned int i;
-
-- if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
-+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- E1000_TXD_CMD_TSE;
-- txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
-+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
-
-- if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) {
-- txd_upper |= E1000_TXD_POPTS_IXSM << 0x8;
-- }
-+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
-+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
- }
-
-- if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
-+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
-- txd_upper |= E1000_TXD_POPTS_TXSM << 0x8;
-- }
--
-- if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
-- txd_lower |= E1000_TXD_CMD_VLE;
-- txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
-+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- }
-
-- i = tx_ring->next_to_use;
-+ if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
-+ txd_lower |= E1000_TXD_CMD_VLE;
-+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
-+ }
-
-- while(count--) {
-- buffer_info = &tx_ring->buffer_info[i];
-- tx_desc = E1000_TX_DESC(*tx_ring, i);
-- tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-- tx_desc->lower.data =
-- cpu_to_le32(txd_lower | buffer_info->length);
-- tx_desc->upper.data = cpu_to_le32(txd_upper);
-- if(unlikely(++i == tx_ring->count)) { i = 0; }
-- }
-- if(tx_desc != NULL) {
-- tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
-- }
-- /* Force memory writes to complete before letting h/w
-- * know there are new descriptors to fetch. (Only
-- * applicable for weak-ordered memory model archs,
-- * such as IA-64). */
-- wmb();
-+ i = tx_ring->next_to_use;
-
-- tx_ring->next_to_use = i;
-- writel(i, adapter->hw.hw_addr + tx_ring->tdt);
-+ while(count--) {
-+ buffer_info = &tx_ring->buffer_info[i];
-+ tx_desc = E1000_TX_DESC(*tx_ring, i);
-+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-+ tx_desc->lower.data =
-+ cpu_to_le32(txd_lower | buffer_info->length);
-+ tx_desc->upper.data = cpu_to_le32(txd_upper);
-+ if (unlikely(++i == tx_ring->count)) i = 0;
-+ }
-+
-+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
-+
-+ /* Force memory writes to complete before letting h/w
-+ * know there are new descriptors to fetch. (Only
-+ * applicable for weak-ordered memory model archs,
-+ * such as IA-64). */
-+ wmb();
-+
-+ tx_ring->next_to_use = i;
-+ writel(i, hw->hw_addr + tx_ring->tdt);
-+ /* we need this if more than one processor can write to our tail
-+ * at a time, it syncronizes IO on IA64/Altix systems */
-+ mmiowb();
- }
-
- /**
-@@ -2950,113 +2925,132 @@ iegbe_tx_queue(struct iegbe_adapter *ada
- * to the beginning of the Tx FIFO.
- **/
-
--static inline int
--iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter, struct sk_buff *skb)
-+#define E1000_FIFO_HDR 0x10
-+#define E1000_82547_PAD_LEN 0x3E0
-+static int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
-+ struct sk_buff *skb)
- {
-- uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
-- uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
-+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
-+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
-
-- E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
-+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
-
-- if(adapter->link_duplex != HALF_DUPLEX) {
-- goto no_fifo_stall_required;
-- }
-- if(atomic_read(&adapter->tx_fifo_stall)) {
-- return 1;
-+ if (adapter->link_duplex != HALF_DUPLEX)
-+ goto no_fifo_stall_required;
-+
-+ if (atomic_read(&adapter->tx_fifo_stall))
-+ return 1;
-+
-+ if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
-+ atomic_set(&adapter->tx_fifo_stall, 1);
-+ return 1;
- }
-- if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
-- atomic_set(&adapter->tx_fifo_stall, 0x1);
-- return 1;
-- }
-
- no_fifo_stall_required:
-- adapter->tx_fifo_head += skb_fifo_len;
-- if(adapter->tx_fifo_head >= adapter->tx_fifo_size) {
-- adapter->tx_fifo_head -= adapter->tx_fifo_size;
-- }
-+ adapter->tx_fifo_head += skb_fifo_len;
-+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
-+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
- return 0;
- }
-
--static inline int
--iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter, struct sk_buff *skb)
-+#define MINIMUM_DHCP_PACKET_SIZE 282
-+static int iegbe_transfer_dhcp_info(struct iegbe_adapter *adapter,
-+ struct sk_buff *skb)
- {
- struct iegbe_hw *hw = &adapter->hw;
-- uint16_t length, offset;
--#ifdef NETIF_F_HW_VLAN_TX
-- if(vlan_tx_tag_present(skb)) {
-- if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
-- ( adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) {
-+ u16 length, offset;
-+ if (vlan_tx_tag_present(skb)) {
-+ if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
-+ ( hw->mng_cookie.status &
-+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
- return 0;
- }
-- }
--#endif
-- if(htons(ETH_P_IP) == skb->protocol) {
-- const struct iphdr *ip = skb->nh.iph;
-- if(IPPROTO_UDP == ip->protocol) {
-- struct udphdr *udp = (struct udphdr *)(skb->h.uh);
-- if(ntohs(udp->dest) == 0x43) { /* 0x43 = 67 */
-- offset = (uint8_t *)udp + 0x8 - skb->data;
-- length = skb->len - offset;
--
-- return iegbe_mng_write_dhcp_info(hw,
-- (uint8_t *)udp + 0x8, length);
-- }
-- }
-- } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
-- struct ethhdr *eth = (struct ethhdr *) skb->data;
-- if((htons(ETH_P_IP) == eth->h_proto)) {
-+ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
-+ struct ethhdr *eth = (struct ethhdr *)skb->data;
-+ if ((htons(ETH_P_IP) == eth->h_proto)) {
- const struct iphdr *ip =
-- (struct iphdr *)((uint8_t *)skb->data+0xe);
-- if(IPPROTO_UDP == ip->protocol) {
-+ (struct iphdr *)((u8 *)skb->data+14);
-+ if (IPPROTO_UDP == ip->protocol) {
- struct udphdr *udp =
-- (struct udphdr *)((uint8_t *)ip +
-- (ip->ihl << 0x2));
-- if(ntohs(udp->dest) == 0x43) {
-- offset = (uint8_t *)udp + 0x8 - skb->data;
-+ (struct udphdr *)((u8 *)ip +
-+ (ip->ihl << 2));
-+ if (ntohs(udp->dest) == 67) {
-+ offset = (u8 *)udp + 8 - skb->data;
- length = skb->len - offset;
-
- return iegbe_mng_write_dhcp_info(hw,
-- (uint8_t *)udp + 0x8,
-+ (u8 *)udp + 8,
- length);
-- }
-+ }
- }
- }
- }
- return 0;
- }
-
--static int
--iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-+static int __iegbe_maybe_stop_tx(struct net_device *netdev, int size)
-+{
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_tx_ring *tx_ring = adapter->tx_ring;
-+
-+ netif_stop_queue(netdev);
-+ /* Herbert's original patch had:
-+ * smp_mb__after_netif_stop_queue();
-+ * but since that doesn't exist yet, just open code it. */
-+ smp_mb();
-+
-+ /* We need to check again in a case another CPU has just
-+ * made room available. */
-+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
-+ return -EBUSY;
-+
-+ /* A reprieve! */
-+ netif_start_queue(netdev);
-+ ++adapter->restart_queue;
-+ return 0;
-+}
-+
-+static int iegbe_maybe_stop_tx(struct net_device *netdev,
-+ struct iegbe_tx_ring *tx_ring, int size)
-+{
-+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
-+ return 0;
-+ return __iegbe_maybe_stop_tx(netdev, size);
-+}
-+
-+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-+static int iegbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
- {
- struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
- struct iegbe_tx_ring *tx_ring;
- unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
- unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
- unsigned int tx_flags = 0;
-- unsigned int len = skb->len;
-+ unsigned int len = skb->len - skb->data_len;
- unsigned long flags = 0;
-- unsigned int nr_frags = 0;
-- unsigned int mss = 0;
-+ unsigned int nr_frags;
-+ unsigned int mss;
- int count = 0;
-- int tso;
--#ifdef MAX_SKB_FRAGS
-+ int tso;
- unsigned int f;
-- len -= skb->data_len;
--#endif
-
--#ifdef CONFIG_E1000_MQ
-- tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
--#else
-+ /* This goes back to the question of how to logically map a tx queue
-+ * to a flow. Right now, performance is impacted slightly negatively
-+ * if using multiple tx queues. If the stack breaks away from a
-+ * single qdisc implementation, we can look at this again. */
- tx_ring = adapter->tx_ring;
--#endif
-
- if (unlikely(skb->len <= 0)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
--#ifdef NETIF_F_TSO
-+ /* 82571 and newer doesn't need the workaround that limited descriptor
-+ * length to 4kB */
-+ if (hw->mac_type >= iegbe_82571)
-+ max_per_txd = 8192;
-+
- mss = skb_shinfo(skb)->gso_size;
- /* The controller does a simple calculation to
- * make sure there is enough room in the FIFO before
-@@ -3064,164 +3058,150 @@ iegbe_xmit_frame(struct sk_buff *skb, st
- * 4 = ceil(buffer len/mss). To make sure we don't
- * overrun the FIFO, adjust the max buffer len if mss
- * drops. */
-- if(mss) {
-- max_per_txd = min(mss << 0x2, max_per_txd);
-- max_txd_pwr = fls(max_per_txd) - 0x1;
-+ if (mss) {
-+ u8 hdr_len;
-+ max_per_txd = min(mss << 2, max_per_txd);
-+ max_txd_pwr = fls(max_per_txd) - 1;
-+
-+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
-+ * points to just header, pull a few bytes of payload from
-+ * frags into skb->data */
-+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-+ if (skb->data_len && hdr_len == len) {
-+ switch (hw->mac_type) {
-+ case iegbe_82544:
-+ /* Make sure we have room to chop off 4 bytes,
-+ * and that the end alignment will work out to
-+ * this hardware's requirements
-+ * NOTE: this is a TSO only workaround
-+ * if end byte alignment not correct move us
-+ * into the next dword */
-+ break;
-+ /* fall through */
-+ case iegbe_82571:
-+ case iegbe_82572:
-+ case iegbe_82573:
-+ break;
-+ default:
-+ /* do nothing */
-+ break;
-+ }
-+ }
- }
-
-- if((mss) || (skb->ip_summed == CHECKSUM_HW)) {
-+ /* reserve a descriptor for the offload context */
-+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
- count++;
-- }
- count++;
--#else
-- if(skb->ip_summed == CHECKSUM_HW) {
-+
-+ /* Controller Erratum workaround */
-+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
- count++;
-- {
--#endif
-+
- count += TXD_USE_COUNT(len, max_txd_pwr);
-
-- if(adapter->pcix_82544) {
-+ if (adapter->pcix_82544)
- count++;
-- }
-+
- /* work-around for errata 10 and it applies to all controllers
- * in PCI-X mode, so add one more descriptor to the count
- */
-- if(unlikely((adapter->hw.bus_type == iegbe_bus_type_pcix) &&
-- (len > 0x7df))) {
-+ if (unlikely((hw->bus_type == iegbe_bus_type_pcix) &&
-+ (len > 2015)))
- count++;
-- }
--#ifdef MAX_SKB_FRAGS
-+
- nr_frags = skb_shinfo(skb)->nr_frags;
-- for(f = 0; f < nr_frags; f++)
-+ for (f = 0; f < nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
- max_txd_pwr);
-- if(adapter->pcix_82544) {
-+ if (adapter->pcix_82544)
- count += nr_frags;
-- }
--#ifdef NETIF_F_TSO
-- /* TSO Workaround for 82571/2 Controllers -- if skb->data
-- * points to just header, pull a few bytes of payload from
-- * frags into skb->data */
-- if (skb_is_gso(skb)) {
-- uint8_t hdr_len;
-- hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 0x2));
-- if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) &&
-- (adapter->hw.mac_type == iegbe_82571 ||
-- adapter->hw.mac_type == iegbe_82572)) {
-- unsigned int pull_size;
-- pull_size = min((unsigned int)0x4, skb->data_len);
-- if (!__pskb_pull_tail(skb, pull_size)) {
-- printk(KERN_ERR "__pskb_pull_tail failed.\n");
-- dev_kfree_skb_any(skb);
-- return -EFAULT;
-- }
-- }
-- }
--#endif
--#endif
-
-- if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == iegbe_82573) ) {
-+
-+ if (hw->tx_pkt_filtering &&
-+ (hw->mac_type == iegbe_82573))
- iegbe_transfer_dhcp_info(adapter, skb);
-- }
--#ifdef NETIF_F_LLTX
-- local_irq_save(flags);
-- if (!spin_trylock(&tx_ring->tx_lock)) {
-+
-+ if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
- /* Collision - tell upper layer to requeue */
-- local_irq_restore(flags);
- return NETDEV_TX_LOCKED;
-- }
--#else
-- spin_lock_irqsave(&tx_ring->tx_lock, flags);
--#endif
-
- /* need: count + 2 desc gap to keep tail from touching
- * head, otherwise try next time */
-- if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 0x2)) {
-- netif_stop_queue(netdev);
-+ if (unlikely(iegbe_maybe_stop_tx(netdev, tx_ring, count + 2))) {
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- return NETDEV_TX_BUSY;
- }
-
-- if(unlikely(adapter->hw.mac_type == iegbe_82547)) {
-- if(unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
-+ if (unlikely(hw->mac_type == iegbe_82547)) {
-+ if (unlikely(iegbe_82547_fifo_workaround(adapter, skb))) {
- netif_stop_queue(netdev);
-- mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
-+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- return NETDEV_TX_BUSY;
- }
- }
-
--#ifndef NETIF_F_LLTX
-- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
--
--#ifdef NETIF_F_HW_VLAN_TX
-- if(unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
-+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
- tx_flags |= E1000_TX_FLAGS_VLAN;
- tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- }
--#endif
-
- first = tx_ring->next_to_use;
-
- tso = iegbe_tso(adapter, tx_ring, skb);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
--#ifdef NETIF_F_LLTX
- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
- return NETDEV_TX_OK;
- }
-
-- if (likely(tso)) {
-+ if (likely(tso)) {
-+ tx_ring->last_tx_tso = 1;
- tx_flags |= E1000_TX_FLAGS_TSO;
-- } else if (likely(iegbe_tx_csum(adapter, tx_ring, skb))) {
-+ } else if (likely(iegbe_tx_csum(adapter, tx_ring, skb)))
- tx_flags |= E1000_TX_FLAGS_CSUM;
-- }
-+
- /* Old method was to assume IPv4 packet by default if TSO was enabled.
- * 82571 hardware supports TSO capabilities for IPv6 as well...
- * no longer assume, we must. */
-- if (likely(skb->protocol == ntohs(ETH_P_IP))) {
-+ if (likely(skb->protocol == htons(ETH_P_IP)))
- tx_flags |= E1000_TX_FLAGS_IPV4;
-- }
-+
- iegbe_tx_queue(adapter, tx_ring, tx_flags,
- iegbe_tx_map(adapter, tx_ring, skb, first,
- max_per_txd, nr_frags, mss));
-
- netdev->trans_start = jiffies;
-
--#ifdef NETIF_F_LLTX
- /* Make sure there is space in the ring for the next send. */
-- if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 0x2)) {
-- netif_stop_queue(netdev);
-- }
-- spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
--#endif
-+ iegbe_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
-
-+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
- return NETDEV_TX_OK;
- }
-
-+
- /**
- * iegbe_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-
--static void
--iegbe_tx_timeout(struct net_device *netdev)
-+static void iegbe_tx_timeout(struct net_device *netdev)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-
-- /* Do the reset outside of interrupt context */
-- schedule_work(&adapter->tx_timeout_task);
-+ /* Do the reset outside of interrupt context */
-+ adapter->tx_timeout_count++;
-+ schedule_work(&adapter->reset_task);
- }
-
--static void
--iegbe_tx_timeout_task(struct net_device *netdev)
-+static void iegbe_reset_task(struct work_struct *work)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_adapter *adapter =
-+ container_of(work, struct iegbe_adapter, reset_task);
-
-- iegbe_down(adapter);
-- iegbe_up(adapter);
-+ iegbe_reinit_locked(adapter);
- }
-
- /**
-@@ -3232,13 +3212,12 @@ iegbe_tx_timeout_task(struct net_device
- * The statistics are actually updated from the timer callback.
- **/
-
--static struct net_device_stats *
--iegbe_get_stats(struct net_device *netdev)
-+static struct net_device_stats *iegbe_get_stats(struct net_device *netdev)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-
-- iegbe_update_stats(adapter);
-- return &adapter->net_stats;
-+ /* only return the current stats */
-+ return &adapter->net_stats;
- }
-
- /**
-@@ -3249,67 +3228,55 @@ iegbe_get_stats(struct net_device *netde
- * Returns 0 on success, negative on failure
- **/
-
--static int
--iegbe_change_mtu(struct net_device *netdev, int new_mtu)
-+static int iegbe_change_mtu(struct net_device *netdev, int new_mtu)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-
-- if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
-- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-- DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
-- return -EINVAL;
-- }
-+ if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
-+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
-+ return -EINVAL;
-+ }
-
-+ /* Adapter-specific max frame size limits. */
-+ switch (hw->mac_type) {
-+ case iegbe_undefined ... iegbe_82542_rev2_1:
-+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
-+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
-+ return -EINVAL;
-+ }
-+ break;
-+ case iegbe_82571:
-+ case iegbe_82572:
- #define MAX_STD_JUMBO_FRAME_SIZE 9234
-- /* might want this to be bigger enum check... */
-- /* 82571 controllers limit jumbo frame size to 10500 bytes */
-- if ((adapter->hw.mac_type == iegbe_82571 ||
-- adapter->hw.mac_type == iegbe_82572) &&
-- max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-- DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported "
-- "on 82571 and 82572 controllers.\n");
-- return -EINVAL;
-- }
--
-- if(adapter->hw.mac_type == iegbe_82573 &&
-- max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
-- DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
-- "on 82573\n");
-- return -EINVAL;
-- }
--
-- if(adapter->hw.mac_type > iegbe_82547_rev_2) {
-- adapter->rx_buffer_len = max_frame;
-- E1000_ROUNDUP(adapter->rx_buffer_len, 0x1024);
-- } else {
-- if(unlikely((adapter->hw.mac_type < iegbe_82543) &&
-- (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
-- DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
-- "on 82542\n");
-- return -EINVAL;
--
-- } else {
-- if(max_frame <= E1000_RXBUFFER_2048) {
-- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-- } else if(max_frame <= E1000_RXBUFFER_4096) {
-- adapter->rx_buffer_len = E1000_RXBUFFER_4096;
-- } else if(max_frame <= E1000_RXBUFFER_8192) {
-- adapter->rx_buffer_len = E1000_RXBUFFER_8192;
-- } else if(max_frame <= E1000_RXBUFFER_16384) {
-- adapter->rx_buffer_len = E1000_RXBUFFER_16384;
-- }
-+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-+ DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
-+ return -EINVAL;
- }
-+ break;
-+ default:
-+ break;
- }
-+ if (max_frame <= E1000_RXBUFFER_256)
-+ adapter->rx_buffer_len = E1000_RXBUFFER_256;
-+ else if (max_frame <= E1000_RXBUFFER_2048)
-+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
-+ else if (max_frame <= E1000_RXBUFFER_4096)
-+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
-+ else if (max_frame <= E1000_RXBUFFER_8192)
-+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
-+ else if (max_frame <= E1000_RXBUFFER_16384)
-+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
-
-- netdev->mtu = new_mtu;
-+ /* adjust allocation if LPE protects us, and we aren't using SBP */
-
-- if(netif_running(netdev)) {
-- iegbe_down(adapter);
-- iegbe_up(adapter);
-- }
-+ netdev->mtu = new_mtu;
-+ hw->max_frame_size = max_frame;
-
-- adapter->hw.max_frame_size = max_frame;
-+ if (netif_running(netdev))
-+ iegbe_reinit_locked(adapter);
-
- return 0;
- }
-@@ -3319,224 +3286,189 @@ iegbe_change_mtu(struct net_device *netd
- * @adapter: board private structure
- **/
-
--void
--iegbe_update_stats(struct iegbe_adapter *adapter)
-+void iegbe_update_stats(struct iegbe_adapter *adapter)
- {
-- struct iegbe_hw *hw = &adapter->hw;
-- unsigned long flags = 0;
-- uint16_t phy_tmp;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ unsigned long flags = 0x0;
-+ uint16_t phy_tmp;
-
- #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
-
-- spin_lock_irqsave(&adapter->stats_lock, flags);
-+ spin_lock_irqsave(&adapter->stats_lock, flags);
-
-- /* these counters are modified from iegbe_adjust_tbi_stats,
-- * called from the interrupt context, so they must only
-- * be written while holding adapter->stats_lock
-- */
-+ /* these counters are modified from iegbe_adjust_tbi_stats,
-+ * called from the interrupt context, so they must only
-+ * be written while holding adapter->stats_lock
-+ */
-
-- adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
-- adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
-- adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
-- adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
-- adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
-- adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
-- adapter->stats.roc += E1000_READ_REG(hw, ROC);
-- adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
-- adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
-- adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
-- adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
-- adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
-- adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
--
-- adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
-- adapter->stats.mpc += E1000_READ_REG(hw, MPC);
-- adapter->stats.scc += E1000_READ_REG(hw, SCC);
-- adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
-- adapter->stats.mcc += E1000_READ_REG(hw, MCC);
-- adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
-- adapter->stats.dc += E1000_READ_REG(hw, DC);
-- adapter->stats.sec += E1000_READ_REG(hw, SEC);
-- adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
-- adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
-- adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
-- adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
-- adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
-- adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
-- adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
-- adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
-- adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
-- adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
-- adapter->stats.ruc += E1000_READ_REG(hw, RUC);
-- adapter->stats.rfc += E1000_READ_REG(hw, RFC);
-- adapter->stats.rjc += E1000_READ_REG(hw, RJC);
-- adapter->stats.torl += E1000_READ_REG(hw, TORL);
-- adapter->stats.torh += E1000_READ_REG(hw, TORH);
-- adapter->stats.totl += E1000_READ_REG(hw, TOTL);
-- adapter->stats.toth += E1000_READ_REG(hw, TOTH);
-- adapter->stats.tpr += E1000_READ_REG(hw, TPR);
-- adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
-- adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
-- adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
-- adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
-- adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
-- adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
-- adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
-- adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
--
-- /* used for adaptive IFS */
--
-- hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
-- adapter->stats.tpt += hw->tx_packet_delta;
-- hw->collision_delta = E1000_READ_REG(hw, COLC);
-- adapter->stats.colc += hw->collision_delta;
--
-- if(hw->mac_type >= iegbe_82543) {
-- adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
-- adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
-- adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
-- adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
-- adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
-- adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
-- }
-- if(hw->mac_type > iegbe_82547_rev_2) {
-- adapter->stats.iac += E1000_READ_REG(hw, IAC);
-- adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
-- adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
-- adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
-- adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
-- adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
-- adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
-- adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
-- adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
-- }
--
-- /* Fill out the OS statistics structure */
--
-- adapter->net_stats.rx_packets = adapter->stats.gprc;
-- adapter->net_stats.tx_packets = adapter->stats.gptc;
-- adapter->net_stats.rx_bytes = adapter->stats.gorcl;
-- adapter->net_stats.tx_bytes = adapter->stats.gotcl;
-- adapter->net_stats.multicast = adapter->stats.mprc;
-- adapter->net_stats.collisions = adapter->stats.colc;
--
-- /* Rx Errors */
--
-- adapter->net_stats.rx_errors = adapter->stats.rxerrc +
-- adapter->stats.crcerrs + adapter->stats.algnerrc +
-- adapter->stats.rlec + adapter->stats.mpc +
-- adapter->stats.cexterr;
-- adapter->net_stats.rx_dropped = adapter->stats.mpc;
-- adapter->net_stats.rx_length_errors = adapter->stats.rlec;
-- adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-- adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-- adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
-- adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
--
-- /* Tx Errors */
--
-- adapter->net_stats.tx_errors = adapter->stats.ecol +
-- adapter->stats.latecol;
-- adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-- adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-- adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
-+ adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
-+ adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
-+ adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
-+ adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
-+ adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
-+ adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
-+ adapter->stats.roc += E1000_READ_REG(hw, ROC);
-+ adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
-+ adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
-+ adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
-+ adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
-+ adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
-+ adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
-+
-+ adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
-+ adapter->stats.mpc += E1000_READ_REG(hw, MPC);
-+ adapter->stats.scc += E1000_READ_REG(hw, SCC);
-+ adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
-+ adapter->stats.mcc += E1000_READ_REG(hw, MCC);
-+ adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
-+ adapter->stats.dc += E1000_READ_REG(hw, DC);
-+ adapter->stats.sec += E1000_READ_REG(hw, SEC);
-+ adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
-+ adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
-+ adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
-+ adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
-+ adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
-+ adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
-+ adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
-+ adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
-+ adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
-+ adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
-+ adapter->stats.ruc += E1000_READ_REG(hw, RUC);
-+ adapter->stats.rfc += E1000_READ_REG(hw, RFC);
-+ adapter->stats.rjc += E1000_READ_REG(hw, RJC);
-+ adapter->stats.torl += E1000_READ_REG(hw, TORL);
-+ adapter->stats.torh += E1000_READ_REG(hw, TORH);
-+ adapter->stats.totl += E1000_READ_REG(hw, TOTL);
-+ adapter->stats.toth += E1000_READ_REG(hw, TOTH);
-+ adapter->stats.tpr += E1000_READ_REG(hw, TPR);
-+ adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
-+ adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
-+ adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
-+ adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
-+ adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
-+ adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
-+ adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
-+ adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
-+
-+ /* used for adaptive IFS */
-+
-+ hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
-+ adapter->stats.tpt += hw->tx_packet_delta;
-+ hw->collision_delta = E1000_READ_REG(hw, COLC);
-+ adapter->stats.colc += hw->collision_delta;
-+
-+ if(hw->mac_type >= iegbe_82543) {
-+ adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
-+ adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
-+ adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
-+ adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
-+ adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
-+ adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
-+ }
-+ if(hw->mac_type > iegbe_82547_rev_2) {
-+ adapter->stats.iac += E1000_READ_REG(hw, IAC);
-+ adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
-+ adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
-+ adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
-+ adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
-+ adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
-+ adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
-+ adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
-+ adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
-+ }
-+
-+ /* Fill out the OS statistics structure */
-+
-+ adapter->net_stats.rx_packets = adapter->stats.gprc;
-+ adapter->net_stats.tx_packets = adapter->stats.gptc;
-+ adapter->net_stats.rx_bytes = adapter->stats.gorcl;
-+ adapter->net_stats.tx_bytes = adapter->stats.gotcl;
-+ adapter->net_stats.multicast = adapter->stats.mprc;
-+ adapter->net_stats.collisions = adapter->stats.colc;
-+
-+ /* Rx Errors */
-+
-+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
-+ adapter->stats.crcerrs + adapter->stats.algnerrc +
-+ adapter->stats.rlec + adapter->stats.mpc +
-+ adapter->stats.cexterr;
-+ adapter->net_stats.rx_dropped = adapter->stats.mpc;
-+ adapter->net_stats.rx_length_errors = adapter->stats.rlec;
-+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-+ adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
-+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
-+
-+ /* Tx Errors */
-+
-+ adapter->net_stats.tx_errors = adapter->stats.ecol +
-+ adapter->stats.latecol;
-+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
-
-- /* Tx Dropped needs to be maintained elsewhere */
-+ /* Tx Dropped needs to be maintained elsewhere */
-
-- /* Phy Stats */
-+ /* Phy Stats */
-
-- if(hw->media_type == iegbe_media_type_copper
-+ if(hw->media_type == iegbe_media_type_copper
- || (hw->media_type == iegbe_media_type_oem
- && iegbe_oem_phy_is_copper(&adapter->hw))) {
-- if((adapter->link_speed == SPEED_1000) &&
-- (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
-- phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
-- adapter->phy_stats.idle_errors += phy_tmp;
-- }
-+ if((adapter->link_speed == SPEED_1000) &&
-+ (!iegbe_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
-+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
-+ adapter->phy_stats.idle_errors += phy_tmp;
-+ }
-
-- if((hw->mac_type <= iegbe_82546) &&
-- (hw->phy_type == iegbe_phy_m88) &&
-+ if((hw->mac_type <= iegbe_82546) &&
-+ (hw->phy_type == iegbe_phy_m88) &&
- !iegbe_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp)) {
-- adapter->phy_stats.receive_errors += phy_tmp;
-- }
-+ adapter->phy_stats.receive_errors += phy_tmp;
-+ }
- }
-
-- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
- }
-
--#ifdef CONFIG_E1000_MQ
--void
--iegbe_rx_schedule(void *data)
-+/**
-+ * iegbe_intr_msi - Interrupt Handler
-+ * @irq: interrupt number
-+ * @data: pointer to a network interface device structure
-+ **/
-+
-+static irqreturn_t iegbe_intr_msi(int irq, void *data)
- {
-- struct net_device *poll_dev, *netdev = data;
-- struct iegbe_adapter *adapter = netdev->priv;
-- int this_cpu = get_cpu();
--
-- poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
-- if (poll_dev == NULL) {
-- put_cpu();
-- return;
-+ struct net_device *netdev = data;
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u32 icr = E1000_READ_REG(&adapter->hw, ICR);
-+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
-+ hw->get_link_status = 1;
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
-+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
-- if (likely(netif_rx_schedule_prep(poll_dev))) {
-- __netif_rx_schedule(poll_dev);
-- } else {
-- iegbe_irq_enable(adapter);
-- }
-- put_cpu();
--}
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
--/*
-- * Check for tx hang condition. This is the condition where a
-- * decsriptor is in the hardware and hasn't been processed for a
-- * while. This code is similar to the check in iegbe_clean_rx_irq()
-- */
--static void
--iegbe_tx_hang_check(struct iegbe_adapter *adapter,
-- struct iegbe_tx_ring *tx_ring)
--{
-- struct net_device *netdev = adapter->netdev;
-- unsigned int i;
-+ if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
-+ | E1000_ICR_TX_DESC_FIFO_PAR
-+ | E1000_ICR_PB
-+ | E1000_ICR_CPP_TARGET
-+ | E1000_ICR_CPP_MASTER ))) {
-
-- /* Check for a hang condition using the buffer currently at the Tx
-- head pointer */
-- i = readl(adapter->hw.hw_addr + tx_ring->tdh);
--
-- if (adapter->detect_tx_hung) {
-- /* Detect a transmit hang in hardware, this serializes the
-- * check with the clearing of time_stamp and movement of i */
-- adapter->detect_tx_hung = FALSE;
--
-- if (tx_ring->buffer_info[i].dma &&
-- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
-- && !(E1000_READ_REG(&adapter->hw, STATUS) &
-- E1000_STATUS_TXOFF)) {
--
-- /* detected Tx unit hang */
-- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-- " TDH <%x>\n"
-- " TDT <%x>\n"
-- " next_to_use <%x>\n"
-- " next_to_clean <%x>\n"
-- "buffer_info[tdh]\n"
-- " dma <%zx>\n"
-- " time_stamp <%lx>\n"
-- " jiffies <%lx>\n",
-- readl(adapter->hw.hw_addr + tx_ring->tdh),
-- readl(adapter->hw.hw_addr + tx_ring->tdt),
-- tx_ring->next_to_use,
-- tx_ring->next_to_clean,
-- (size_t)tx_ring->buffer_info[i].dma,
-- tx_ring->buffer_info[i].time_stamp,
-- jiffies);
-- netif_stop_queue(netdev);
-- }
-+ iegbe_irq_disable(adapter);
-+ printk("Critical error! ICR = 0x%x\n", icr);
-+ return IRQ_HANDLED;
- }
--}
-+ if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+ adapter->total_tx_bytes = 0;
-+ adapter->total_tx_packets = 0;
-+ adapter->total_rx_bytes = 0;
-+ adapter->total_rx_packets = 0;
-+ __netif_rx_schedule(netdev, &adapter->napi);
-+ } else
-+ iegbe_irq_enable(adapter);
-
--#endif
-+ return IRQ_HANDLED;
-+}
-
- /**
- * iegbe_intr - Interrupt Handler
-@@ -3546,364 +3478,208 @@ iegbe_tx_hang_check(struct iegbe_adapter
- **/
-
- static irqreturn_t
--iegbe_intr(int irq, void *data, struct pt_regs *regs)
-+iegbe_intr(int irq, void *data)
- {
-- struct net_device *netdev = data;
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- struct iegbe_hw *hw = &adapter->hw;
-- uint32_t rctl, tctl;
-- uint32_t icr = E1000_READ_REG(hw, ICR);
--#ifndef CONFIG_E1000_NAPI
-- uint32_t i;
--#ifdef IEGBE_GBE_WORKAROUND
-- int rx_cleaned;
--#endif
--#endif
-+ struct net_device *netdev = data;
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u32 icr = E1000_READ_REG(&adapter->hw, ICR);
-
-- if(unlikely(!icr)) {
-+ if (unlikely(!icr))
- return IRQ_NONE; /* Not our interrupt */
-- }
-+
-+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
-+ * not set, then the adapter didn't send an interrupt */
-+ if (unlikely(hw->mac_type >= iegbe_82571 &&
-+ !(icr & E1000_ICR_INT_ASSERTED)))
-+ return IRQ_NONE;
-+
-+
- if(unlikely(icr & (E1000_ICR_RX_DESC_FIFO_PAR
-- | E1000_ICR_TX_DESC_FIFO_PAR
-- | E1000_ICR_PB
-- | E1000_ICR_CPP_TARGET
-- | E1000_ICR_CPP_MASTER ))) {
-+ | E1000_ICR_TX_DESC_FIFO_PAR
-+ | E1000_ICR_PB
-+ | E1000_ICR_CPP_TARGET
-+ | E1000_ICR_CPP_MASTER ))) {
-
- iegbe_irq_disable(adapter);
-- tctl = E1000_READ_REG(&adapter->hw, TCTL);
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_TCTL_EN);
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
--
-- tasklet_data = (unsigned long) (icr + adapter->bd_number);
-- tasklet_schedule(&iegbe_reset_tasklet);
--
-- return IRQ_HANDLED;
-- }
--
--#ifdef CONFIG_E1000_NAPI
-- atomic_inc(&adapter->irq_sem);
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Ensure that the TXQE interrupt is enabled in NAPI mode */
-- E1000_WRITE_REG(hw, IMC, ~E1000_IMS_TXQE);
--#else
-- E1000_WRITE_REG(hw, IMC, ~0);
--#endif
-- E1000_WRITE_FLUSH(hw);
--#ifdef CONFIG_E1000_MQ
-- if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
-- cpu_set(adapter->cpu_for_queue[0],
-- adapter->rx_sched_call_data.cpumask);
-- for (i = 1; i < adapter->num_queues; i++) {
-- cpu_set(adapter->cpu_for_queue[i],
-- adapter->rx_sched_call_data.cpumask);
-- atomic_inc(&adapter->irq_sem);
-- }
-- atomic_set(&adapter->rx_sched_call_data.count, i);
-- smp_call_async_mask(&adapter->rx_sched_call_data);
-- } else {
-- DEBUGOUT("call_data.count == %u\n",
-- atomic_read(&adapter->rx_sched_call_data.count));
-+ printk("Critical error! ICR = 0x%x\n", icr);
-+ return IRQ_HANDLED;
- }
--#else
-- if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) {
-- __netif_rx_schedule(&adapter->polling_netdev[0]);
-- } else {
-- iegbe_irq_enable(adapter);
-- }
--#endif
--
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Clean the Tx ring */
-- for (i = 0; i < E1000_MAX_INTR; i++) {
-- adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
-- adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
--
-- adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
-- adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
--
-- /* Only clean Tx descriptors for a TXQE interrupt */
-- if(icr & E1000_ICR_TXQE) {
-- adapter->stats.txqec++;
-- iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
-- }
-- else {
-- iegbe_tx_hang_check(adapter, adapter->tx_ring);
-- }
-- }
-
--#endif /*IEGBE_GBE_WORKAROUND */
--
--#else
-- /* Writing IMC and IMS is needed for 82547.
-- * Due to Hub Link bus being occupied, an interrupt
-- * de-assertion message is not able to be sent.
-- * When an interrupt assertion message is generated later,
-- * two messages are re-ordered and sent out.
-- * That causes APIC to think 82547 is in de-assertion
-- * state, while 82547 is in assertion state, resulting
-- * in dead lock. Writing IMC forces 82547 into
-- * de-assertion state.
-- */
-- if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
-- atomic_inc(&adapter->irq_sem);
-- E1000_WRITE_REG(hw, IMC, ~0);
-- }
--
--#ifdef IEGBE_GBE_WORKAROUND
--
-- for (i = 0; i < E1000_MAX_INTR; i++) {
-- rx_cleaned = adapter->clean_rx(adapter, adapter->rx_ring);
-- adapter->stats.rx_next_to_clean = adapter->rx_ring->next_to_clean;
-- adapter->stats.rx_next_to_use = adapter->rx_ring->next_to_use;
--
-- adapter->stats.tx_next_to_clean = adapter->tx_ring->next_to_clean;
-- adapter->stats.tx_next_to_use = adapter->tx_ring->next_to_use;
--
-- /* Only clean Tx descriptors for a TXQE interrupt */
-- if(icr & E1000_ICR_TXQE) {
-- adapter->stats.txqec++;
-- iegbe_clean_tx_ring_partial(adapter, adapter->tx_ring);
-- }
-- else {
-- iegbe_tx_hang_check(adapter, adapter->tx_ring);
-- }
-- if(!rx_cleaned) {
-- break;
-- }
-+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
-+ * need for the IMC write */
-+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
-+ hw->get_link_status = 1;
-+ /* guard against interrupt when we're going down */
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
-+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+
- }
-
--#else
-- for (i = 0; i < E1000_MAX_INTR; i++)
-- if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-- !iegbe_clean_tx_irq(adapter, adapter->tx_ring))) {
-- break;
-- }
--#endif
--
-- if (hw->mac_type == iegbe_82547 || hw->mac_type == iegbe_82547_rev_2) {
-- iegbe_irq_enable(adapter);
-- }
--#endif
--#ifdef E1000_COUNT_ICR
-- adapter->icr_txdw += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_txqe += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_lsc += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_rxseq += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_rxdmt += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_rxo += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_rxt += icr & 0x01UL;
-- if(hw->mac_type != iegbe_icp_xxxx) {
-- icr >>= 0x2;
-- adapter->icr_mdac += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_rxcfg += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_gpi += icr & 0x01UL;
-- } else {
-- icr >>= 0x4;
-- }
-- if(hw->mac_type == iegbe_icp_xxxx) {
-- icr >>= 0xc;
-- adapter->icr_pb += icr & 0x01UL;
-- icr >>= 0x3;
-- adapter->icr_intmem_icp_xxxx += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_cpp_target += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_cpp_master += icr & 0x01UL;
-- icr >>= 0x1;
-- adapter->icr_stat += icr & 0x01UL;
-+ if (unlikely(hw->mac_type < iegbe_82571)) {
-+ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-+ E1000_WRITE_FLUSH(&adapter->hw);
- }
--#endif
-+ if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+ adapter->total_tx_bytes = 0;
-+ adapter->total_tx_packets = 0;
-+ adapter->total_rx_bytes = 0;
-+ adapter->total_rx_packets = 0;
-+ __netif_rx_schedule(netdev, &adapter->napi);
-+ } else
-+ /* this really should not happen! if it does it is basically a
-+ * bug, but not a hard error, so enable ints and continue */
-+ iegbe_irq_enable(adapter);
-
- return IRQ_HANDLED;
- }
-
--#ifdef CONFIG_E1000_NAPI
- /**
- * iegbe_clean - NAPI Rx polling callback
- * @adapter: board private structure
- **/
--
--static int
--iegbe_clean(struct net_device *poll_dev, int *budget)
-+static int iegbe_clean(struct napi_struct *napi, int budget)
- {
-- struct iegbe_adapter *adapter;
-- int work_to_do = min(*budget, poll_dev->quota);
-- int tx_cleaned, i = 0, work_done = 0;
-+ struct iegbe_adapter *adapter = container_of(napi, struct iegbe_adapter, napi);
-+ struct net_device *poll_dev = adapter->netdev;
-+ int tx_cleaned = 0, work_done = 0;
-
- /* Must NOT use netdev_priv macro here. */
- adapter = poll_dev->priv;
-
-- /* Keep link state information with original netdev */
-- if (!netif_carrier_ok(adapter->netdev)) {
-- goto quit_polling;
-- }
-- while (poll_dev != &adapter->polling_netdev[i]) {
-- i++;
-- if (unlikely(i == adapter->num_queues)) {
-- BUG();
-- }
-- }
--
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Tx descriptors are cleaned in iegbe_intr(). No need to clean
-- them here */
-- tx_cleaned = FALSE;
--#else
-- tx_cleaned = iegbe_clean_tx_irq(adapter, &adapter->tx_ring[i]);
--#endif
-- adapter->clean_rx(adapter, &adapter->rx_ring[i],
-- &work_done, work_to_do);
--
-- *budget -= work_done;
-- poll_dev->quota -= work_done;
--
-- /* If no Tx and not enough Rx work done, exit the polling mode */
-- if((!tx_cleaned && (work_done == 0)) ||
-- !netif_running(adapter->netdev)) {
--quit_polling:
-- netif_rx_complete(poll_dev);
-+ /* iegbe_clean is called per-cpu. This lock protects
-+ * tx_ring[0] from being cleaned by multiple cpus
-+ * simultaneously. A failure obtaining the lock means
-+ * tx_ring[0] is currently being cleaned anyway. */
-+ if (spin_trylock(&adapter->tx_queue_lock)) {
-+ tx_cleaned = iegbe_clean_tx_irq(adapter,
-+ &adapter->tx_ring[0]);
-+ spin_unlock(&adapter->tx_queue_lock);
-+ }
-+
-+ adapter->clean_rx(adapter, &adapter->rx_ring[0],
-+ &work_done, budget);
-+
-+ if (tx_cleaned)
-+ work_done = budget;
-+
-+ /* If budget not fully consumed, exit the polling mode */
-+ if (work_done < budget) {
-+ if (likely(adapter->itr_setting & 3))
-+ iegbe_set_itr(adapter);
-+ netif_rx_complete(poll_dev, napi);
- iegbe_irq_enable(adapter);
-- return 0;
- }
-
-- return 1;
-+ return work_done;
- }
-
--#endif
--
--
--#ifndef IEGBE_GBE_WORKAROUND
- /**
- * iegbe_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- **/
--
--static boolean_t
--iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_tx_irq(struct iegbe_adapter *adapter,
- struct iegbe_tx_ring *tx_ring)
- {
-- struct net_device *netdev = adapter->netdev;
-- struct iegbe_tx_desc *tx_desc, *eop_desc;
-- struct iegbe_buffer *buffer_info;
-- unsigned int i, eop;
-- boolean_t cleaned = FALSE;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct iegbe_tx_desc *tx_desc, *eop_desc;
-+ struct iegbe_buffer *buffer_info;
-+ unsigned int i, eop;
-+ unsigned int count = 0;
-+ bool cleaned = false;
-+ unsigned int total_tx_bytes=0, total_tx_packets=0;
-
-- i = tx_ring->next_to_clean;
-- eop = tx_ring->buffer_info[i].next_to_watch;
-- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-+ i = tx_ring->next_to_clean;
-+ eop = tx_ring->buffer_info[i].next_to_watch;
-+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
-
- while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
-- /* Premature writeback of Tx descriptors clear (free buffers
-- * and unmap pci_mapping) previous_buffer_info */
-- if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
-- iegbe_unmap_and_free_tx_resource(adapter,
-- &tx_ring->previous_buffer_info);
-- }
--
-- for (cleaned = FALSE; !cleaned; ) {
-- tx_desc = E1000_TX_DESC(*tx_ring, i);
-- buffer_info = &tx_ring->buffer_info[i];
-- cleaned = (i == eop);
--
--#ifdef NETIF_F_TSO
-- if (!(netdev->features & NETIF_F_TSO)) {
--#endif
-- iegbe_unmap_and_free_tx_resource(adapter,
-- buffer_info);
--#ifdef NETIF_F_TSO
-- } else {
-- if (cleaned) {
-- memcpy(&tx_ring->previous_buffer_info,
-- buffer_info,
-- sizeof(struct iegbe_buffer));
-- memset(buffer_info, 0,
-- sizeof(struct iegbe_buffer));
-- } else {
-- iegbe_unmap_and_free_tx_resource(
-- adapter, buffer_info);
-- }
-- }
--#endif
--
-- tx_desc->buffer_addr = 0;
-- tx_desc->lower.data = 0;
-+ for (cleaned = false; !cleaned; ) {
-+ tx_desc = E1000_TX_DESC(*tx_ring, i);
-+ buffer_info = &tx_ring->buffer_info[i];
-+ cleaned = (i == eop);
-+
-+ if (cleaned) {
-+ struct sk_buff *skb = buffer_info->skb;
-+ unsigned int segs = 0, bytecount;
-+ segs = skb_shinfo(skb)->gso_segs ?: 1;
-+ bytecount = ((segs - 1) * skb_headlen(skb)) +
-+ skb->len;
-+ total_tx_packets += segs;
-+ total_tx_bytes += bytecount;
-+ }
-+ iegbe_unmap_and_free_tx_resource(adapter, buffer_info);
- tx_desc->upper.data = 0;
-
-- if (unlikely(++i == tx_ring->count)) { i = 0; }
-- }
--
-- tx_ring->pkt++;
-+ if (unlikely(++i == tx_ring->count)) i = 0;
-+ }
-
-- eop = tx_ring->buffer_info[i].next_to_watch;
-- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-- }
-+ eop = tx_ring->buffer_info[i].next_to_watch;
-+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
-+#define E1000_TX_WEIGHT 64
-+ /* weight of a sort for tx, to avoid endless transmit cleanup */
-+ if (count++ == E1000_TX_WEIGHT)
-+ break;
-+ }
-
- tx_ring->next_to_clean = i;
-
-- spin_lock(&tx_ring->tx_lock);
-+#define TX_WAKE_THRESHOLD 32
-
-- if (unlikely(cleaned && netif_queue_stopped(netdev) &&
-- netif_carrier_ok(netdev))) {
-- netif_wake_queue(netdev);
-- }
-- spin_unlock(&tx_ring->tx_lock);
--
-- if (adapter->detect_tx_hung) {
-- /* Detect a transmit hang in hardware, this serializes the
-- * check with the clearing of time_stamp and movement of i */
-- adapter->detect_tx_hung = FALSE;
--
-- if (tx_ring->buffer_info[i].dma &&
-- time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
-- && !(E1000_READ_REG(&adapter->hw, STATUS) &
-- E1000_STATUS_TXOFF)) {
--
-- /* detected Tx unit hang */
-- i = tx_ring->next_to_clean;
-- eop = tx_ring->buffer_info[i].next_to_watch;
-- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-- " TDH <%x>\n"
-- " TDT <%x>\n"
-- " next_to_use <%x>\n"
-- " next_to_clean <%x>\n"
-- "buffer_info[next_to_clean]\n"
-- " dma <%zx>\n"
-- " time_stamp <%lx>\n"
-- " next_to_watch <%x>\n"
-- " jiffies <%lx>\n"
-- " next_to_watch.status <%x>\n",
-- readl(adapter->hw.hw_addr + tx_ring->tdh),
-- readl(adapter->hw.hw_addr + tx_ring->tdt),
-- tx_ring->next_to_use,
-- i,
-- (size_t)tx_ring->buffer_info[i].dma,
-- tx_ring->buffer_info[i].time_stamp,
-- eop,
-- jiffies,
-- eop_desc->upper.fields.status);
-- netif_stop_queue(netdev);
-+ if (unlikely(cleaned && netif_carrier_ok(netdev) &&
-+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
-+ /* Make sure that anybody stopping the queue after this
-+ * sees the new next_to_clean.
-+ */
-+ smp_mb();
-+ if (netif_queue_stopped(netdev)) {
-+ netif_wake_queue(netdev);
-+ ++adapter->restart_queue;
- }
- }
--#ifdef NETIF_F_TSO
-- if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
-- time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) {
-- iegbe_unmap_and_free_tx_resource(
-- adapter, &tx_ring->previous_buffer_info);
-+
-+ if (adapter->detect_tx_hung) {
-+ /* Detect a transmit hang in hardware, this serializes the
-+ * check with the clearing of time_stamp and movement of i */
-+ adapter->detect_tx_hung = false;
-+
-+ if (tx_ring->buffer_info[eop].dma &&
-+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
-+ (adapter->tx_timeout_factor * HZ))
-+ && !(E1000_READ_REG(hw, STATUS) & E1000_STATUS_TXOFF)) {
-+
-+ /* detected Tx unit hang */
-+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-+ " Tx Queue <%lu>\n"
-+ " TDH <%x>\n"
-+ " TDT <%x>\n"
-+ " next_to_use <%x>\n"
-+ " next_to_clean <%x>\n"
-+ "buffer_info[next_to_clean]\n"
-+ " time_stamp <%lx>\n"
-+ " next_to_watch <%x>\n"
-+ " jiffies <%lx>\n"
-+ " next_to_watch.status <%x>\n",
-+ (unsigned long)((tx_ring - adapter->tx_ring) /
-+ sizeof(struct iegbe_tx_ring)),
-+ readl(hw->hw_addr + tx_ring->tdh),
-+ readl(hw->hw_addr + tx_ring->tdt),
-+ tx_ring->next_to_use,
-+ tx_ring->next_to_clean,
-+ tx_ring->buffer_info[eop].time_stamp,
-+ eop,
-+ jiffies,
-+ eop_desc->upper.fields.status);
-+ netif_stop_queue(netdev);
-+ }
- }
--#endif
-- return cleaned;
-+ adapter->total_tx_bytes += total_tx_bytes;
-+ adapter->total_tx_packets += total_tx_packets;
-+ adapter->net_stats.tx_bytes += total_tx_bytes;
-+ adapter->net_stats.tx_packets += total_tx_packets;
-+ return cleaned;
- }
--#endif
-
- /**
- * iegbe_rx_checksum - Receive Checksum Offload for 82543
-@@ -3913,192 +3689,193 @@ iegbe_clean_tx_irq(struct iegbe_adapter
- * @sk_buff: socket buffer with received data
- **/
-
--static inline void
--iegbe_rx_checksum(struct iegbe_adapter *adapter,
-- uint32_t status_err, uint32_t csum,
-- struct sk_buff *skb)
-+static void iegbe_rx_checksum(struct iegbe_adapter *adapter, u32 status_err,
-+ u32 csum, struct sk_buff *skb)
- {
-- uint16_t status = (uint16_t)status_err;
-- uint8_t errors = (uint8_t)(status_err >> 0x18);
-+ struct iegbe_hw *hw = &adapter->hw;
-+ u16 status = (u16)status_err;
-+ u8 errors = (u8)(status_err >> 24);
- skb->ip_summed = CHECKSUM_NONE;
-
-- /* 82543 or newer only */
-- if(unlikely(adapter->hw.mac_type < iegbe_82543)) { return; }
-- /* Ignore Checksum bit is set */
-- if(unlikely(status & E1000_RXD_STAT_IXSM)) { return; }
-- /* TCP/UDP checksum error bit is set */
-- if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
-- /* let the stack verify checksum errors */
-- adapter->hw_csum_err++;
-- return;
-- }
-- /* TCP/UDP Checksum has not been calculated */
-- if(adapter->hw.mac_type <= iegbe_82547_rev_2) {
-- if(!(status & E1000_RXD_STAT_TCPCS)) {
-- return;
-+ /* 82543 or newer only */
-+ if (unlikely(hw->mac_type < iegbe_82543)) return;
-+ /* Ignore Checksum bit is set */
-+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
-+ /* TCP/UDP checksum error bit is set */
-+ if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
-+ /* let the stack verify checksum errors */
-+ adapter->hw_csum_err++;
-+ return;
-+ }
-+ /* TCP/UDP Checksum has not been calculated */
-+ if (hw->mac_type <= iegbe_82547_rev_2) {
-+ if (!(status & E1000_RXD_STAT_TCPCS))
-+ return;
-+ } else {
-+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
-+ return;
- }
-- } else {
-- if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) {
-- return;
-- }
-+ /* It must be a TCP or UDP packet with a valid checksum */
-+ if(likely(status & E1000_RXD_STAT_TCPCS)) {
-+ /* TCP checksum is good */
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ } else if (hw->mac_type > iegbe_82547_rev_2) {
-+ /* IP fragment with UDP payload */
-+ /* Hardware complements the payload checksum, so we undo it
-+ * and then put the value in host order for further stack use.
-+ */
-+ __sum16 sum = (__force __sum16)htons(csum);
-+ skb->csum = csum_unfold(~sum);
-+ skb->ip_summed = CHECKSUM_COMPLETE;
- }
-- /* It must be a TCP or UDP packet with a valid checksum */
-- if(likely(status & E1000_RXD_STAT_TCPCS)) {
-- /* TCP checksum is good */
-- skb->ip_summed = CHECKSUM_UNNECESSARY;
-- } else if(adapter->hw.mac_type > iegbe_82547_rev_2) {
-- /* IP fragment with UDP payload */
-- /* Hardware complements the payload checksum, so we undo it
-- * and then put the value in host order for further stack use.
-- */
-- csum = ntohl(csum ^ 0xFFFF);
-- skb->csum = csum;
-- skb->ip_summed = CHECKSUM_HW;
-- }
-- adapter->hw_csum_good++;
-+ adapter->hw_csum_good++;
- }
-
- /**
- * iegbe_clean_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- **/
--
--static boolean_t
--#ifdef CONFIG_E1000_NAPI
--iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int *work_done, int work_to_do)
--#else
--iegbe_clean_rx_irq(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring)
--#endif
- {
-- struct net_device *netdev = adapter->netdev;
-- struct pci_dev *pdev = adapter->pdev;
-- struct iegbe_rx_desc *rx_desc;
-- struct iegbe_buffer *buffer_info;
-- struct sk_buff *skb;
-- unsigned long flags = 0;
-- uint32_t length;
-- uint8_t last_byte;
-- unsigned int i;
-- boolean_t cleaned = FALSE;
--
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Need to keep track of the amount of Rx descriptors that we
-- cleaned to ensure that we don't supply too many back to the
-- hardware */
-- int cleaned_count = 0;
--#endif
--
-- i = rx_ring->next_to_clean;
-- rx_desc = E1000_RX_DESC(*rx_ring, i);
--
-- while(rx_desc->status & E1000_RXD_STAT_DD) {
-- buffer_info = &rx_ring->buffer_info[i];
--#ifdef CONFIG_E1000_NAPI
-- if(*work_done >= work_to_do) {
-- break;
-- }
-- (*work_done)++;
--#endif
-- cleaned = TRUE;
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct iegbe_rx_desc *rx_desc, *next_rxd;
-+ struct iegbe_buffer *buffer_info, *next_buffer;
-+ unsigned long flags;
-+ u32 length;
-+ u8 last_byte;
-+ unsigned int i;
-+ int cleaned_count = 0;
-+ bool cleaned = false;
-+ unsigned int total_rx_bytes=0, total_rx_packets=0;
-
--#ifdef IEGBE_GBE_WORKAROUND
-- cleaned_count++;
--#endif
-+ i = rx_ring->next_to_clean;
-+ rx_desc = E1000_RX_DESC(*rx_ring, i);
-+ buffer_info = &rx_ring->buffer_info[i];
-
-- pci_unmap_single(pdev,
-- buffer_info->dma,
-- buffer_info->length,
-- PCI_DMA_FROMDEVICE);
-+ while(rx_desc->status & E1000_RXD_STAT_DD) {
-+ struct sk_buff *skb;
-+ u8 status;
-+ if (*work_done >= work_to_do)
-+ break;
-+ (*work_done)++;
-
-+ status = rx_desc->status;
- skb = buffer_info->skb;
-- length = le16_to_cpu(rx_desc->length);
-+ buffer_info->skb = NULL;
-+ prefetch(skb->data - NET_IP_ALIGN);
-+ if (++i == rx_ring->count) i = 0;
-+ next_rxd = E1000_RX_DESC(*rx_ring, i);
-+ prefetch(next_rxd);
-+ next_buffer = &rx_ring->buffer_info[i];
-+ cleaned = true;
-+ cleaned_count++;
-+ pci_unmap_single(pdev,
-+ buffer_info->dma,
-+ buffer_info->length,
-+ PCI_DMA_FROMDEVICE);
-+
-+ length = le16_to_cpu(rx_desc->length);
-+
-+ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
-+ /* All receives must fit into a single buffer */
-+ E1000_DBG("%s: Receive packet consumed multiple"
-+ " buffers\n", netdev->name);
-+ buffer_info->skb = skb;
-+ goto next_desc;
-+ }
-
-- if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
-- /* All receives must fit into a single buffer */
-- E1000_DBG("%s: Receive packet consumed multiple"
-- " buffers\n", netdev->name);
-- dev_kfree_skb_irq(skb);
-- goto next_desc;
-- }
-+ if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
-+ last_byte = *(skb->data + length - 1);
-+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
-+ last_byte)) {
-+ spin_lock_irqsave(&adapter->stats_lock, flags);
-+ iegbe_tbi_adjust_stats(hw, &adapter->stats,
-+ length, skb->data);
-+ spin_unlock_irqrestore(&adapter->stats_lock,
-+ flags);
-+ length--;
-+ } else {
-+ buffer_info->skb = skb;
-+ goto next_desc;
-+ }
-+ }
-
-- if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
-- last_byte = *(skb->data + length - 0x1);
-- if(TBI_ACCEPT(&adapter->hw, rx_desc->status,
-- rx_desc->errors, length, last_byte)) {
-- spin_lock_irqsave(&adapter->stats_lock, flags);
-- iegbe_tbi_adjust_stats(&adapter->hw,
-- &adapter->stats,
-- length, skb->data);
-- spin_unlock_irqrestore(&adapter->stats_lock,
-- flags);
-- length--;
-- } else {
-- dev_kfree_skb_irq(skb);
-- goto next_desc;
-+ /* adjust length to remove Ethernet CRC, this must be
-+ * done after the TBI_ACCEPT workaround above */
-+ length -= 4;
-+
-+ /* probably a little skewed due to removing CRC */
-+ total_rx_bytes += length;
-+ total_rx_packets++;
-+
-+ /* code added for copybreak, this should improve
-+ * performance for small packets with large amounts
-+ * of reassembly being done in the stack */
-+ if (length < copybreak) {
-+ struct sk_buff *new_skb =
-+ netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
-+ if (new_skb) {
-+ skb_reserve(new_skb, NET_IP_ALIGN);
-+ skb_copy_to_linear_data_offset(new_skb,
-+ -NET_IP_ALIGN,
-+ (skb->data -
-+ NET_IP_ALIGN),
-+ (length +
-+ NET_IP_ALIGN));
-+ /* save the skb in buffer_info as good */
-+ buffer_info->skb = skb;
-+ skb = new_skb;
- }
-+ /* else just continue with the old one */
- }
--
-- /* Good Receive */
-- skb_put(skb, length - ETHERNET_FCS_SIZE);
-+ /* Good Receive */
-+ skb_put(skb, length);
-
- /* Receive Checksum Offload */
- iegbe_rx_checksum(adapter,
-- (uint32_t)(rx_desc->status) |
-- ((uint32_t)(rx_desc->errors) << 0x18),
-- rx_desc->csum, skb);
-+ (u32)(status) |
-+ ((u32)(rx_desc->errors) << 24),
-+ le16_to_cpu(rx_desc->csum), skb);
-+
- skb->protocol = eth_type_trans(skb, netdev);
--#ifdef CONFIG_E1000_NAPI
--#ifdef NETIF_F_HW_VLAN_TX
-- if(unlikely(adapter->vlgrp &&
-- (rx_desc->status & E1000_RXD_STAT_VP))) {
-+
-+ if (unlikely(adapter->vlgrp &&
-+ (status & E1000_RXD_STAT_VP))) {
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-- le16_to_cpu(rx_desc->special) &
-- E1000_RXD_SPC_VLAN_MASK);
-+ le16_to_cpu(rx_desc->special));
- } else {
- netif_receive_skb(skb);
- }
--#else
-- netif_receive_skb(skb);
--#endif
--#else /* CONFIG_E1000_NAPI */
--#ifdef NETIF_F_HW_VLAN_TX
-- if(unlikely(adapter->vlgrp &&
-- (rx_desc->status & E1000_RXD_STAT_VP))) {
-- vlan_hwaccel_rx(skb, adapter->vlgrp,
-- le16_to_cpu(rx_desc->special) &
-- E1000_RXD_SPC_VLAN_MASK);
-- } else {
-- netif_rx(skb);
-- }
--#else
-- netif_rx(skb);
--#endif
--#endif /* CONFIG_E1000_NAPI */
-+
- netdev->last_rx = jiffies;
-- rx_ring->pkt++;
-
- next_desc:
- rx_desc->status = 0;
-- buffer_info->skb = NULL;
-- if(unlikely(++i == rx_ring->count)) { i = 0; }
-
-- rx_desc = E1000_RX_DESC(*rx_ring, i);
-+ /* return some buffers to hardware, one at a time is too slow */
-+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
-+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+ cleaned_count = 0;
-+ }
-+
-+ /* use prefetched values */
-+ rx_desc = next_rxd;
-+ buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Only allocate the number of buffers that we have actually
-- cleaned! */
-- if (cleaned_count) {
-- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-- }
--#else
-- adapter->alloc_rx_buf(adapter, rx_ring);
--#endif
--
-+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
-+ if (cleaned_count)
-+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+
-+ adapter->total_rx_packets += total_rx_packets;
-+ adapter->total_rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_packets += total_rx_packets;
- return cleaned;
- }
-
-@@ -4107,161 +3884,153 @@ next_desc:
- * @adapter: board private structure
- **/
-
--static boolean_t
--#ifdef CONFIG_E1000_NAPI
--iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-+static bool iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int *work_done, int work_to_do)
--#else
--iegbe_clean_rx_irq_ps(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring)
--#endif
- {
-- union iegbe_rx_desc_packet_split *rx_desc;
-- struct net_device *netdev = adapter->netdev;
-- struct pci_dev *pdev = adapter->pdev;
-- struct iegbe_buffer *buffer_info;
-- struct iegbe_ps_page *ps_page;
-- struct iegbe_ps_page_dma *ps_page_dma;
-- struct sk_buff *skb;
-- unsigned int i, j;
-- uint32_t length, staterr;
-- boolean_t cleaned = FALSE;
--
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Need to keep track of the amount of Rx descriptors that we
-- cleaned to ensure that we don't supply too many back to the
-- hardware */
-- int cleaned_count = 0;
--#endif
--
-- i = rx_ring->next_to_clean;
-- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
--
-- while(staterr & E1000_RXD_STAT_DD) {
-- buffer_info = &rx_ring->buffer_info[i];
-- ps_page = &rx_ring->ps_page[i];
-- ps_page_dma = &rx_ring->ps_page_dma[i];
--#ifdef CONFIG_E1000_NAPI
-- if(unlikely(*work_done >= work_to_do)) {
-- break;
-- }
-- (*work_done)++;
--#endif
-- cleaned = TRUE;
--
--#ifdef IEGBE_GBE_WORKAROUND
-- cleaned_count++;
--#endif
-+ union iegbe_rx_desc_packet_split *rx_desc, *next_rxd;
-+ struct net_device *netdev = adapter->netdev;
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct iegbe_buffer *buffer_info, *next_buffer;
-+ struct iegbe_ps_page *ps_page;
-+ struct iegbe_ps_page_dma *ps_page_dma;
-+ struct sk_buff *skb;
-+ unsigned int i, j;
-+ u32 length, staterr;
-+ int cleaned_count = 0;
-+ bool cleaned = false;
-+ unsigned int total_rx_bytes=0, total_rx_packets=0;
-+
-+ i = rx_ring->next_to_clean;
-+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
-+ buffer_info = &rx_ring->buffer_info[i];
-
-- pci_unmap_single(pdev, buffer_info->dma,
-- buffer_info->length,
-- PCI_DMA_FROMDEVICE);
-+ while(staterr & E1000_RXD_STAT_DD) {
-+ ps_page = &rx_ring->ps_page[i];
-+ ps_page_dma = &rx_ring->ps_page_dma[i];
-+
-+ if (unlikely(*work_done >= work_to_do))
-+ break;
-+ (*work_done)++;
-
- skb = buffer_info->skb;
-+ prefetch(skb->data - NET_IP_ALIGN);
-+ if (++i == rx_ring->count) i = 0;
-+ next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
-+ prefetch(next_rxd);
-+ next_buffer = &rx_ring->buffer_info[i];
-+ cleaned = true;
-+ cleaned_count++;
-+ pci_unmap_single(pdev, buffer_info->dma,
-+ buffer_info->length,
-+ PCI_DMA_FROMDEVICE);
-+
-+ if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
-+ E1000_DBG("%s: Packet Split buffers didn't pick up"
-+ " the full packet\n", netdev->name);
-+ dev_kfree_skb_irq(skb);
-+ goto next_desc;
-+ }
-
-- if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
-- E1000_DBG("%s: Packet Split buffers didn't pick up"
-- " the full packet\n", netdev->name);
-- dev_kfree_skb_irq(skb);
-- goto next_desc;
-- }
--
-- if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
-- dev_kfree_skb_irq(skb);
-- goto next_desc;
-- }
--
-- length = le16_to_cpu(rx_desc->wb.middle.length0);
-+ if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
-+ dev_kfree_skb_irq(skb);
-+ goto next_desc;
-+ }
-
-- if(unlikely(!length)) {
-- E1000_DBG("%s: Last part of the packet spanning"
-- " multiple descriptors\n", netdev->name);
-- dev_kfree_skb_irq(skb);
-- goto next_desc;
-- }
-+ length = le16_to_cpu(rx_desc->wb.middle.length0);
-
-- /* Good Receive */
-- skb_put(skb, length);
--
-- for(j = 0; j < adapter->rx_ps_pages; j++) {
-- if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) {
-- break;
-- }
-- pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
-- PAGE_SIZE, PCI_DMA_FROMDEVICE);
-- ps_page_dma->ps_page_dma[j] = 0;
-- skb_shinfo(skb)->frags[j].page =
-- ps_page->ps_page[j];
-- ps_page->ps_page[j] = NULL;
-- skb_shinfo(skb)->frags[j].page_offset = 0;
-- skb_shinfo(skb)->frags[j].size = length;
-- skb_shinfo(skb)->nr_frags++;
-- skb->len += length;
-- skb->data_len += length;
-- }
-+ if(unlikely(!length)) {
-+ E1000_DBG("%s: Last part of the packet spanning"
-+ " multiple descriptors\n", netdev->name);
-+ dev_kfree_skb_irq(skb);
-+ goto next_desc;
-+ }
-
-- iegbe_rx_checksum(adapter, staterr,
-- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
-- skb->protocol = eth_type_trans(skb, netdev);
-+ /* Good Receive */
-+ skb_put(skb, length);
-
-- if(likely(rx_desc->wb.upper.header_status &
-- E1000_RXDPS_HDRSTAT_HDRSP)) {
-- adapter->rx_hdr_split++;
--#ifdef HAVE_RX_ZERO_COPY
-- skb_shinfo(skb)->zero_copy = TRUE;
--#endif
-- }
--#ifdef CONFIG_E1000_NAPI
--#ifdef NETIF_F_HW_VLAN_TX
-- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-- le16_to_cpu(rx_desc->wb.middle.vlan) &
-- E1000_RXD_SPC_VLAN_MASK);
-- } else {
-- netif_receive_skb(skb);
-- }
--#else
-- netif_receive_skb(skb);
--#endif
--#else /* CONFIG_E1000_NAPI */
--#ifdef NETIF_F_HW_VLAN_TX
-- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-- vlan_hwaccel_rx(skb, adapter->vlgrp,
-- le16_to_cpu(rx_desc->wb.middle.vlan) &
-- E1000_RXD_SPC_VLAN_MASK);
-- } else {
-- netif_rx(skb);
-- }
--#else
-- netif_rx(skb);
--#endif
--#endif /* CONFIG_E1000_NAPI */
-- netdev->last_rx = jiffies;
-- rx_ring->pkt++;
-+ {
-+ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
-+ if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
-+ u8 *vaddr;
-+ pci_dma_sync_single_for_cpu(pdev,
-+ ps_page_dma->ps_page_dma[0],
-+ PAGE_SIZE,
-+ PCI_DMA_FROMDEVICE);
-+ vaddr = kmap_atomic(ps_page->ps_page[0],
-+ KM_SKB_DATA_SOFTIRQ);
-+ memcpy(skb_tail_pointer(skb), vaddr, l1);
-+ kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
-+ pci_dma_sync_single_for_device(pdev,
-+ ps_page_dma->ps_page_dma[0],
-+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+ l1 -= 4;
-+ skb_put(skb, l1);
-+ goto copydone;
-+ } /* if */
-+ }
-+ for (j = 0; j < adapter->rx_ps_pages; j++) {
-+ length = le16_to_cpu(rx_desc->wb.upper.length[j]);
-+ if (!length)
-+ break;
-+ pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
-+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
-+ ps_page_dma->ps_page_dma[j] = 0;
-+ skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
-+ length);
-+ ps_page->ps_page[j] = NULL;
-+ skb->len += length;
-+ skb->data_len += length;
-+ skb->truesize += length;
-+ }
-
--next_desc:
-- rx_desc->wb.middle.status_error &= ~0xFF;
-- buffer_info->skb = NULL;
-- if(unlikely(++i == rx_ring->count)) { i = 0; }
-+ pskb_trim(skb, skb->len - 4);
-+copydone:
-+ total_rx_bytes += skb->len;
-+ total_rx_packets++;
-+ iegbe_rx_checksum(adapter, staterr,
-+ le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
-+ skb->protocol = eth_type_trans(skb, netdev);
-+
-+ if(likely(rx_desc->wb.upper.header_status &
-+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
-+ adapter->rx_hdr_split++;
-+
-+ if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-+ le16_to_cpu(rx_desc->wb.middle.vlan));
-+ } else {
-+ netif_receive_skb(skb);
-+ }
-
-- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
-- }
-- rx_ring->next_to_clean = i;
-+ netdev->last_rx = jiffies;
-
--#ifdef IEGBE_GBE_WORKAROUND
-- /* Only allocate the number of buffers that we have actually
-- cleaned! */
-- if (cleaned_count) {
-- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-- }
--#else
-- adapter->alloc_rx_buf(adapter, rx_ring);
--#endif
-+next_desc:
-+ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
-+ buffer_info->skb = NULL;
-
-- return cleaned;
-+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
-+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+ cleaned_count = 0;
-+ }
-+
-+ /* use prefetched values */
-+ rx_desc = next_rxd;
-+ buffer_info = next_buffer;
-+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
-+ }
-+ rx_ring->next_to_clean = i;
-+
-+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
-+ if (cleaned_count)
-+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-+
-+ adapter->total_rx_packets += total_rx_packets;
-+ adapter->total_rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_bytes += total_rx_bytes;
-+ adapter->net_stats.rx_packets += total_rx_packets;
-+ return cleaned;
- }
-
- /**
-@@ -4269,142 +4038,115 @@ next_desc:
- * @adapter: address of board private structure
- **/
-
--#ifdef IEGBE_GBE_WORKAROUND
--static void
--iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-+
-+static void iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int cleaned_count)
--#else
--static void
--iegbe_alloc_rx_buffers(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring)
--#endif
- {
-- struct net_device *netdev = adapter->netdev;
-- struct pci_dev *pdev = adapter->pdev;
-- struct iegbe_rx_desc *rx_desc;
-- struct iegbe_buffer *buffer_info;
-- struct sk_buff *skb;
-- unsigned int i;
-- unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
--
-- i = rx_ring->next_to_use;
-- buffer_info = &rx_ring->buffer_info[i];
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct pci_dev *pdev = adapter->pdev;
-+ struct iegbe_rx_desc *rx_desc;
-+ struct iegbe_buffer *buffer_info;
-+ struct sk_buff *skb;
-+ unsigned int i;
-+ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
-
--#ifdef IEGBE_GBE_WORKAROUND
-- if (cleaned_count > IEGBE_GBE_WORKAROUND_NUM_RX_DESCRIPTORS) {
-- adapter->stats.cc_gt_num_rx++;
-- }
-- while(cleaned_count-- && !buffer_info->skb) {
--#else
-- while(!buffer_info->skb) {
--#endif
-- skb = dev_alloc_skb(bufsz);
-+ i = rx_ring->next_to_use;
-+ buffer_info = &rx_ring->buffer_info[i];
-
-- if(unlikely(!skb)) {
-- /* Better luck next round */
-- break;
-- }
-+ while (cleaned_count--) {
-+ skb = buffer_info->skb;
-+ if (skb) {
-+ skb_trim(skb, 0);
-+ goto map_skb;
-+ }
-+ skb = netdev_alloc_skb(netdev, bufsz);
-+
-+ if(unlikely(!skb)) {
-+ /* Better luck next round */
-+ adapter->alloc_rx_buff_failed++;
-+ break;
-+ }
-
-- /* Fix for errata 23, can't cross 64kB boundary */
-- if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-- struct sk_buff *oldskb = skb;
-- DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
-- "at %p\n", bufsz, skb->data);
-- /* Try again, without freeing the previous */
-- skb = dev_alloc_skb(bufsz);
-- /* Failed allocation, critical failure */
-- if(!skb) {
-- dev_kfree_skb(oldskb);
-- break;
-- }
-+ /* Fix for errata 23, can't cross 64kB boundary */
-+ if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-+ struct sk_buff *oldskb = skb;
-+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
-+ "at %p\n", bufsz, skb->data);
-+ /* Try again, without freeing the previous */
-+ skb = netdev_alloc_skb(netdev, bufsz);
-+ /* Failed allocation, critical failure */
-+ if(!skb) {
-+ dev_kfree_skb(oldskb);
-+ break;
-+ }
-
-- if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-- /* give up */
-- dev_kfree_skb(skb);
-- dev_kfree_skb(oldskb);
-- break; /* while !buffer_info->skb */
-- } else {
-- /* Use new allocation */
-- dev_kfree_skb(oldskb);
-+ if(!iegbe_check_64k_bound(adapter, skb->data, bufsz)) {
-+ /* give up */
-+ dev_kfree_skb(skb);
-+ dev_kfree_skb(oldskb);
-+ break; /* while !buffer_info->skb */
- }
-- }
-- /* Make buffer alignment 2 beyond a 16 byte boundary
-- * this will result in a 16 byte aligned IP header after
-- * the 14 byte MAC header is removed
-- */
-- skb_reserve(skb, NET_IP_ALIGN);
--
-- skb->dev = netdev;
--
-- buffer_info->skb = skb;
-- buffer_info->length = adapter->rx_buffer_len;
-- buffer_info->dma = pci_map_single(pdev,
-- skb->data,
-- adapter->rx_buffer_len,
-- PCI_DMA_FROMDEVICE);
--
-- /* Fix for errata 23, can't cross 64kB boundary */
-- if(!iegbe_check_64k_bound(adapter,
-- (void *)(unsigned long)buffer_info->dma,
-- adapter->rx_buffer_len)) {
-- DPRINTK(RX_ERR, ERR,
-- "dma align check failed: %u bytes at %p\n",
-- adapter->rx_buffer_len,
-- (void *)(unsigned long)buffer_info->dma);
-- dev_kfree_skb(skb);
-- buffer_info->skb = NULL;
--
-- pci_unmap_single(pdev, buffer_info->dma,
-- adapter->rx_buffer_len,
-- PCI_DMA_FROMDEVICE);
--
-- break; /* while !buffer_info->skb */
-- }
-- rx_desc = E1000_RX_DESC(*rx_ring, i);
-- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
--
--#ifdef IEGBE_GBE_WORKAROUND_DISABLED
-- adapter->stats.num_rx_buf_alloc++;
-+ /* Use new allocation */
-+ dev_kfree_skb(oldskb);
-+ }
-+ /* Make buffer alignment 2 beyond a 16 byte boundary
-+ * this will result in a 16 byte aligned IP header after
-+ * the 14 byte MAC header is removed
-+ */
-+ skb_reserve(skb, NET_IP_ALIGN);
-+
-+
-+ buffer_info->skb = skb;
-+ buffer_info->length = adapter->rx_buffer_len;
-+map_skb:
-+ buffer_info->dma = pci_map_single(pdev,
-+ skb->data,
-+ adapter->rx_buffer_len,
-+ PCI_DMA_FROMDEVICE);
-+
-+ /* Fix for errata 23, can't cross 64kB boundary */
-+ if(!iegbe_check_64k_bound(adapter,
-+ (void *)(unsigned long)buffer_info->dma,
-+ adapter->rx_buffer_len)) {
-+ DPRINTK(RX_ERR, ERR,
-+ "dma align check failed: %u bytes at %p\n",
-+ adapter->rx_buffer_len,
-+ (void *)(unsigned long)buffer_info->dma);
-+ dev_kfree_skb(skb);
-+ buffer_info->skb = NULL;
-+
-+ pci_unmap_single(pdev, buffer_info->dma,
-+ adapter->rx_buffer_len,
-+ PCI_DMA_FROMDEVICE);
-
-- /* Force memory writes to complete before letting h/w
-- * know there are new descriptors to fetch. (Only
-- * applicable for weak-ordered memory model archs,
-- * such as IA-64). */
-- wmb();
-- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
-+ break; /* while !buffer_info->skb */
-+ }
-+ rx_desc = E1000_RX_DESC(*rx_ring, i);
-+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
--#endif
--#ifndef IEGBE_GBE_WORKAROUND
-- if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
-- /* Force memory writes to complete before letting h/w
-- * know there are new descriptors to fetch. (Only
-- * applicable for weak-ordered memory model archs,
-- * such as IA-64). */
-- wmb();
-- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
-- }
--#endif
-- if(unlikely(++i == rx_ring->count)) { i = 0; }
-- buffer_info = &rx_ring->buffer_info[i];
-- }
-+ /* Force memory writes to complete before letting h/w
-+ * know there are new descriptors to fetch. (Only
-+ * applicable for weak-ordered memory model archs,
-+ * such as IA-64). */
-+ if (unlikely(++i == rx_ring->count))
-+ i = 0;
-+ buffer_info = &rx_ring->buffer_info[i];
-+ }
-
--#ifdef IEGBE_GBE_WORKAROUND
- if (likely(rx_ring->next_to_use != i)) {
-- rx_ring->next_to_use = i;
-- if (unlikely(i-- == 0)) {
-- i = (rx_ring->count - 0x1);
-- }
-+ rx_ring->next_to_use = i;
-+ if (unlikely(i-- == 0))
-+ i = (rx_ring->count - 1);
-+
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
-+ writel(i, hw->hw_addr + rx_ring->rdt);
- }
--#else
-- rx_ring->next_to_use = i;
--#endif
- }
-
- /**
-@@ -4412,49 +4154,41 @@ iegbe_alloc_rx_buffers(struct iegbe_adap
- * @adapter: address of board private structure
- **/
-
--#ifdef IEGBE_GBE_WORKAROUND
--static void
--iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-+
-+static void iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
- struct iegbe_rx_ring *rx_ring,
- int cleaned_count)
--#else
--static void
--iegbe_alloc_rx_buffers_ps(struct iegbe_adapter *adapter,
-- struct iegbe_rx_ring *rx_ring)
--#endif
- {
-- struct net_device *netdev = adapter->netdev;
-- struct pci_dev *pdev = adapter->pdev;
-- union iegbe_rx_desc_packet_split *rx_desc;
-- struct iegbe_buffer *buffer_info;
-- struct iegbe_ps_page *ps_page;
-- struct iegbe_ps_page_dma *ps_page_dma;
-- struct sk_buff *skb;
-- unsigned int i, j;
--
-- i = rx_ring->next_to_use;
-- buffer_info = &rx_ring->buffer_info[i];
-- ps_page = &rx_ring->ps_page[i];
-- ps_page_dma = &rx_ring->ps_page_dma[i];
-+ struct iegbe_hw *hw = &adapter->hw;
-+ struct net_device *netdev = adapter->netdev;
-+ struct pci_dev *pdev = adapter->pdev;
-+ union iegbe_rx_desc_packet_split *rx_desc;
-+ struct iegbe_buffer *buffer_info;
-+ struct iegbe_ps_page *ps_page;
-+ struct iegbe_ps_page_dma *ps_page_dma;
-+ struct sk_buff *skb;
-+ unsigned int i, j;
-+
-+ i = rx_ring->next_to_use;
-+ buffer_info = &rx_ring->buffer_info[i];
-+ ps_page = &rx_ring->ps_page[i];
-+ ps_page_dma = &rx_ring->ps_page_dma[i];
-
--#ifdef IEGBE_GBE_WORKAROUND
-- while(cleaned_count-- && !buffer_info->skb) {
--#else
-- while(!buffer_info->skb) {
--#endif
-- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-+ while (cleaned_count--) {
-+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-
- for (j = 0; j < PS_PAGE_BUFFERS; j++) {
-- if (j < adapter->rx_ps_pages) {
-- if (likely(!ps_page->ps_page[j])) {
-- ps_page->ps_page[j] =
-- alloc_page(GFP_ATOMIC);
-+ if (j < adapter->rx_ps_pages) {
-+ if (likely(!ps_page->ps_page[j])) {
-+ ps_page->ps_page[j] =
-+ alloc_page(GFP_ATOMIC);
- if (unlikely(!ps_page->ps_page[j])) {
-- goto no_buffers;
-+ adapter->alloc_rx_buff_failed++;
-+ goto no_buffers;
- }
-- ps_page_dma->ps_page_dma[j] =
-- pci_map_page(pdev,
-- ps_page->ps_page[j],
-+ ps_page_dma->ps_page_dma[j] =
-+ pci_map_page(pdev,
-+ ps_page->ps_page[j],
- 0, PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- }
-@@ -4462,26 +4196,26 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
- * change because each write-back erases
- * this info.
- */
-- rx_desc->read.buffer_addr[j+0x1] =
-+ rx_desc->read.buffer_addr[j+1] =
- cpu_to_le64(ps_page_dma->ps_page_dma[j]);
-- } else {
-- rx_desc->read.buffer_addr[j+0x1] = ~0;
-- }
-+ } else
-+ rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
- }
-
-- skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
-+ skb = netdev_alloc_skb(netdev,
-+ adapter->rx_ps_bsize0 + NET_IP_ALIGN);
-
-- if (unlikely(!skb)) {
-+ if (unlikely(!skb)) {
-+ adapter->alloc_rx_buff_failed++;
- break;
-- }
-+ }
-+
- /* Make buffer alignment 2 beyond a 16 byte boundary
- * this will result in a 16 byte aligned IP header after
- * the 14 byte MAC header is removed
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
-- skb->dev = netdev;
--
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_ps_bsize0;
- buffer_info->dma = pci_map_single(pdev, skb->data,
-@@ -4490,27 +4224,28 @@ iegbe_alloc_rx_buffers_ps(struct iegbe_a
-
- rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
-
-- if (unlikely((i & ~(E1000_RX_BUFFER_WRITE - 0x1)) == i)) {
-- /* Force memory writes to complete before letting h/w
-- * know there are new descriptors to fetch. (Only
-- * applicable for weak-ordered memory model archs,
-- * such as IA-64). */
-- wmb();
-- /* Hardware increments by 16 bytes, but packet split
-- * descriptors are 32 bytes...so we increment tail
-- * twice as much.
-- */
-- writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
-- }
--
-- if (unlikely(++i == rx_ring->count)) { i = 0; }
-+ if (unlikely(++i == rx_ring->count)) i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- ps_page = &rx_ring->ps_page[i];
- ps_page_dma = &rx_ring->ps_page_dma[i];
- }
-
- no_buffers:
-- rx_ring->next_to_use = i;
-+ if (likely(rx_ring->next_to_use != i)) {
-+ rx_ring->next_to_use = i;
-+ if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
-+
-+ /* Force memory writes to complete before letting h/w
-+ * know there are new descriptors to fetch. (Only
-+ * applicable for weak-ordered memory model archs,
-+ * such as IA-64). */
-+ wmb();
-+ /* Hardware increments by 16 bytes, but packet split
-+ * descriptors are 32 bytes...so we increment tail
-+ * twice as much.
-+ */
-+ writel(i<<1, hw->hw_addr + rx_ring->rdt);
-+ }
- }
-
- /**
-@@ -4521,52 +4256,52 @@ no_buffers:
- static void
- iegbe_smartspeed(struct iegbe_adapter *adapter)
- {
-- uint16_t phy_status;
-- uint16_t phy_ctrl;
-+ uint16_t phy_status;
-+ uint16_t phy_ctrl;
-
-- if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
-+ if((adapter->hw.phy_type != iegbe_phy_igp) || !adapter->hw.autoneg ||
- !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL)) {
-- return;
-+ return;
- }
-- if(adapter->smartspeed == 0) {
-- /* If Master/Slave config fault is asserted twice,
-- * we assume back-to-back */
-- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-+ if(adapter->smartspeed == 0x0) {
-+ /* If Master/Slave config fault is asserted twice,
-+ * we assume back-to-back */
-+ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
- if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
-- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
-+ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
- if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) { return; }
-- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-- if(phy_ctrl & CR_1000T_MS_ENABLE) {
-- phy_ctrl &= ~CR_1000T_MS_ENABLE;
-- iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
-- phy_ctrl);
-- adapter->smartspeed++;
-- if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-- !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
-- &phy_ctrl)) {
-- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-- MII_CR_RESTART_AUTO_NEG);
-- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
-- phy_ctrl);
-- }
-- }
-- return;
-- } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
-- /* If still no link, perhaps using 2/3 pair cable */
-- iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-- phy_ctrl |= CR_1000T_MS_ENABLE;
-- iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
-- if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-- !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
-- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-- MII_CR_RESTART_AUTO_NEG);
-- iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
-- }
-- }
-- /* Restart process after E1000_SMARTSPEED_MAX iterations */
-+ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-+ if(phy_ctrl & CR_1000T_MS_ENABLE) {
-+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
-+ iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
-+ phy_ctrl);
-+ adapter->smartspeed++;
-+ if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-+ !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL,
-+ &phy_ctrl)) {
-+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-+ MII_CR_RESTART_AUTO_NEG);
-+ iegbe_write_phy_reg(&adapter->hw, PHY_CTRL,
-+ phy_ctrl);
-+ }
-+ }
-+ return;
-+ } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
-+ /* If still no link, perhaps using 2/3 pair cable */
-+ iegbe_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
-+ phy_ctrl |= CR_1000T_MS_ENABLE;
-+ iegbe_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
-+ if(!iegbe_phy_setup_autoneg(&adapter->hw) &&
-+ !iegbe_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
-+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
-+ MII_CR_RESTART_AUTO_NEG);
-+ iegbe_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
-+ }
-+ }
-+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
- if(adapter->smartspeed++ == E1000_SMARTSPEED_MAX) {
-- adapter->smartspeed = 0;
--}
-+ adapter->smartspeed = 0x0;
-+ }
- }
-
- /**
-@@ -4576,23 +4311,22 @@ iegbe_smartspeed(struct iegbe_adapter *a
- * @cmd:
- **/
-
--static int
--iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-+static int iegbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
- {
-- switch (cmd) {
-+ switch (cmd) {
- #ifdef SIOCGMIIPHY
-- case SIOCGMIIPHY:
-- case SIOCGMIIREG:
-- case SIOCSMIIREG:
-- return iegbe_mii_ioctl(netdev, ifr, cmd);
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return iegbe_mii_ioctl(netdev, ifr, cmd);
- #endif
- #ifdef ETHTOOL_OPS_COMPAT
-- case SIOCETHTOOL:
-- return ethtool_ioctl(ifr);
-+ case SIOCETHTOOL:
-+ return ethtool_ioctl(ifr);
- #endif
-- default:
-- return -EOPNOTSUPP;
-- }
-+ default:
-+ return -EOPNOTSUPP;
-+ }
- }
-
- #ifdef SIOCGMIIPHY
-@@ -4603,534 +4337,510 @@ iegbe_ioctl(struct net_device *netdev, s
- * @cmd:
- **/
-
--static int
--iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-+static int iegbe_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
-+ int cmd)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- struct mii_ioctl_data *data = if_mii(ifr);
-- int retval;
-- uint16_t mii_reg;
-- uint16_t spddplx;
-- unsigned long flags;
--
-- if((adapter->hw.media_type == iegbe_media_type_oem &&
-- !iegbe_oem_phy_is_copper(&adapter->hw)) ||
-- adapter->hw.media_type == iegbe_media_type_fiber ||
-- adapter->hw.media_type == iegbe_media_type_internal_serdes ) {
-- return -EOPNOTSUPP;
-- }
-- switch (cmd) {
-- case SIOCGMIIPHY:
-- data->phy_id = adapter->hw.phy_addr;
-- break;
-- case SIOCGMIIREG:
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ int retval;
-+ uint16_t mii_reg;
-+ uint16_t spddplx;
-+ unsigned long flags = 0;
-+
-+ if((adapter->hw.media_type == iegbe_media_type_oem
-+ && !iegbe_oem_phy_is_copper(&adapter->hw))
-+ ||adapter->hw.media_type != iegbe_media_type_copper) {
-+ return -EOPNOTSUPP;
-+ }
-+ switch (cmd) {
-+ case SIOCGMIIPHY:
-+ data->phy_id = adapter->hw.phy_addr;
-+ break;
-+ case SIOCGMIIREG:
- if(!capable(CAP_NET_ADMIN)) {
-- return -EPERM;
-+ return -EPERM;
- }
-- spin_lock_irqsave(&adapter->stats_lock, flags);
-- if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-- &data->val_out)) {
-- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-- return -EIO;
-- }
-- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-- break;
-- case SIOCSMIIREG:
-+ spin_lock_irqsave(&adapter->stats_lock, flags);
-+ if(iegbe_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-+ &data->val_out)) {
-+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+ return -EIO;
-+ }
-+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+ break;
-+ case SIOCSMIIREG:
- if(!capable(CAP_NET_ADMIN)){
-- return -EPERM;
-+ return -EPERM;
- }
- if(data->reg_num & ~(0x1F)) {
-- return -EFAULT;
-+ return -EFAULT;
- }
-- mii_reg = data->val_in;
-- spin_lock_irqsave(&adapter->stats_lock, flags);
-- if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
-- mii_reg)) {
-- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-- return -EIO;
-- }
-- switch(adapter->hw.phy_type) {
-- case iegbe_phy_m88:
-- switch (data->reg_num) {
-- case PHY_CTRL:
-+ mii_reg = data->val_in;
-+ spin_lock_irqsave(&adapter->stats_lock, flags);
-+ if(iegbe_write_phy_reg(&adapter->hw, data->reg_num,
-+ mii_reg)) {
-+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+ return -EIO;
-+ }
-+ switch(adapter->hw.phy_type) {
-+ case iegbe_phy_m88:
-+ switch (data->reg_num) {
-+ case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN) {
-- break;
-+ break;
- }
-- if(mii_reg & MII_CR_AUTO_NEG_EN) {
-- adapter->hw.autoneg = 1;
-- adapter->hw.autoneg_advertised = 0x2F;
-- } else {
-+ if(mii_reg & MII_CR_AUTO_NEG_EN) {
-+ adapter->hw.autoneg = 1;
-+ adapter->hw.autoneg_advertised = 0x2F;
-+ } else {
- if(mii_reg & 0x40){
-- spddplx = SPEED_1000;
-+ spddplx = SPEED_1000;
- } else if(mii_reg & 0x2000) {
-- spddplx = SPEED_100;
-+ spddplx = SPEED_100;
- } else {
-- spddplx = SPEED_10;
-+ spddplx = SPEED_10;
- }
-- spddplx += (mii_reg & 0x100)
-- ? FULL_DUPLEX :
-- HALF_DUPLEX;
-- retval = iegbe_set_spd_dplx(adapter,
-- spddplx);
-- if(retval) {
-- spin_unlock_irqrestore(
-- &adapter->stats_lock,
-- flags);
-- return retval;
-- }
-- }
-- if(netif_running(adapter->netdev)) {
-- iegbe_down(adapter);
-- iegbe_up(adapter);
-+ spddplx += (mii_reg & 0x100)
-+ ? FULL_DUPLEX :
-+ HALF_DUPLEX;
-+ retval = iegbe_set_spd_dplx(adapter,
-+ spddplx);
-+ if(retval) {
-+ spin_unlock_irqrestore(
-+ &adapter->stats_lock,
-+ flags);
-+ return retval;
-+ }
-+ }
-+ if(netif_running(adapter->netdev)) {
-+ iegbe_down(adapter);
-+ iegbe_up(adapter);
- } else {
-- iegbe_reset(adapter);
-+ iegbe_reset(adapter);
- }
-- break;
-- case M88E1000_PHY_SPEC_CTRL:
-- case M88E1000_EXT_PHY_SPEC_CTRL:
-- if(iegbe_phy_reset(&adapter->hw)) {
-- spin_unlock_irqrestore(
-- &adapter->stats_lock, flags);
-- return -EIO;
-- }
-- break;
-- }
-- break;
-+ break;
-+ case M88E1000_PHY_SPEC_CTRL:
-+ case M88E1000_EXT_PHY_SPEC_CTRL:
-+ if(iegbe_phy_reset(&adapter->hw)) {
-+ spin_unlock_irqrestore(
-+ &adapter->stats_lock, flags);
-+ return -EIO;
-+ }
-+ break;
-+ }
-+ break;
-
-- case iegbe_phy_oem:
-- retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
-- if(retval) {
-- spin_unlock_irqrestore(
-- &adapter->stats_lock, flags);
-- return retval;
-- }
-- break;
-+ case iegbe_phy_oem:
-+ retval = iegbe_oem_mii_ioctl(adapter, flags, ifr, cmd);
-+ if(retval) {
-+ spin_unlock_irqrestore(
-+ &adapter->stats_lock, flags);
-+ return retval;
-+ }
-+ break;
-
-- default:
-- switch (data->reg_num) {
-- case PHY_CTRL:
-+ default:
-+ switch (data->reg_num) {
-+ case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN) {
-- break;
-+ break;
- }
-- if(netif_running(adapter->netdev)) {
-- iegbe_down(adapter);
-- iegbe_up(adapter);
-+ if(netif_running(adapter->netdev)) {
-+ iegbe_down(adapter);
-+ iegbe_up(adapter);
- } else {
-- iegbe_reset(adapter);
-+ iegbe_reset(adapter);
- }
-- break;
-- }
-- }
-- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-- break;
-- default:
-- return -EOPNOTSUPP;
-- }
-- return E1000_SUCCESS;
-+ break;
-+ }
-+ }
-+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
-+ break;
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+ return E1000_SUCCESS;
- }
- #endif
-
--void
--iegbe_pci_set_mwi(struct iegbe_hw *hw)
-+void iegbe_pci_set_mwi(struct iegbe_hw *hw)
- {
-- struct iegbe_adapter *adapter = hw->back;
--#ifdef HAVE_PCI_SET_MWI
-- int ret_val = pci_set_mwi(adapter->pdev);
--
-- if(ret_val) {
-- DPRINTK(PROBE, ERR, "Error in setting MWI\n");
-- }
--#else
-- pci_write_config_word(adapter->pdev, PCI_COMMAND,
-- adapter->hw.pci_cmd_word |
-- PCI_COMMAND_INVALIDATE);
--#endif
-+ struct iegbe_adapter *adapter = hw->back;
-+ int ret_val = pci_set_mwi(adapter->pdev);
-+
-+ if (ret_val)
-+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
- }
-
--void
--iegbe_pci_clear_mwi(struct iegbe_hw *hw)
-+void iegbe_pci_clear_mwi(struct iegbe_hw *hw)
- {
-- struct iegbe_adapter *adapter = hw->back;
-+ struct iegbe_adapter *adapter = hw->back;
-
--#ifdef HAVE_PCI_SET_MWI
-- pci_clear_mwi(adapter->pdev);
--#else
-- pci_write_config_word(adapter->pdev, PCI_COMMAND,
-- adapter->hw.pci_cmd_word &
-- ~PCI_COMMAND_INVALIDATE);
--#endif
-+ pci_clear_mwi(adapter->pdev);
- }
-
- void
- iegbe_read_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
- {
-- struct iegbe_adapter *adapter = hw->back;
-+ struct iegbe_adapter *adapter = hw->back;
-
-- pci_read_config_word(adapter->pdev, reg, value);
-+ pci_read_config_word(adapter->pdev, reg, value);
- }
-
- void
- iegbe_write_pci_cfg(struct iegbe_hw *hw, uint32_t reg, uint16_t *value)
- {
-- struct iegbe_adapter *adapter = hw->back;
-+ struct iegbe_adapter *adapter = hw->back;
-
-- pci_write_config_word(adapter->pdev, reg, *value);
-+ pci_write_config_word(adapter->pdev, reg, *value);
- }
-
- uint32_t
- iegbe_io_read(struct iegbe_hw *hw, unsigned long port)
- {
-- return inl(port);
-+ return inl(port);
- }
-
- void
- iegbe_io_write(struct iegbe_hw *hw, unsigned long port, uint32_t value)
- {
-- outl(value, port);
-+ outl(value, port);
- }
-
--#ifdef NETIF_F_HW_VLAN_TX
--static void
--iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
-+static void iegbe_vlan_rx_register(struct net_device *netdev,
-+ struct vlan_group *grp)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t ctrl, rctl;
--
-- iegbe_irq_disable(adapter);
-- adapter->vlgrp = grp;
--
-- if(grp) {
-- /* enable VLAN tag insert/strip */
-- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-- ctrl |= E1000_CTRL_VME;
-- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
--
-- /* enable VLAN receive filtering */
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- rctl |= E1000_RCTL_VFE;
-- rctl &= ~E1000_RCTL_CFIEN;
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-- iegbe_update_mng_vlan(adapter);
-- } else {
-- /* disable VLAN tag insert/strip */
-- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-- ctrl &= ~E1000_CTRL_VME;
-- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ uint32_t ctrl, rctl;
-
-- /* disable VLAN filtering */
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- rctl &= ~E1000_RCTL_VFE;
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-- if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
-- iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-- }
-- }
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
-+ iegbe_irq_disable(adapter);
-+ adapter->vlgrp = grp;
-+
-+ if(grp) {
-+ /* enable VLAN tag insert/strip */
-+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+ ctrl |= E1000_CTRL_VME;
-+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+
-+ /* enable VLAN receive filtering */
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ rctl |= E1000_RCTL_VFE;
-+ rctl &= ~E1000_RCTL_CFIEN;
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ iegbe_update_mng_vlan(adapter);
-+ } else {
-+ /* disable VLAN tag insert/strip */
-+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+ ctrl &= ~E1000_CTRL_VME;
-+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+
-+ /* disable VLAN filtering */
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ rctl &= ~E1000_RCTL_VFE;
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
-+ iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-+ }
-+ }
-
-- iegbe_irq_enable(adapter);
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
-+ iegbe_irq_enable(adapter);
- }
-
--static void
--iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
-+static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t vfta, index;
-- if((adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ uint32_t vfta, index;
-+ if((adapter->hw.mng_cookie.status &
-+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- (vid == adapter->mng_vlan_id)) {
-- return;
-+ return;
- }
-- /* add VID to filter table */
-+ /* add VID to filter table */
- index = (vid >> 0x5) & 0x7F;
-- vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-+ vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- vfta |= (0x1 << (vid & 0x1F));
-- iegbe_write_vfta(&adapter->hw, index, vfta);
-+ iegbe_write_vfta(&adapter->hw, index, vfta);
- }
-
--static void
--iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
-+static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
- {
- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t vfta, index;
-+ u32 vfta, index;
-
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
- iegbe_irq_disable(adapter);
--
-- if(adapter->vlgrp) {
-- adapter->vlgrp->vlan_devices[vid] = NULL;
-- }
-+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
-+ if (!test_bit(__E1000_DOWN, &adapter->flags))
- iegbe_irq_enable(adapter);
-
-- if((adapter->hw.mng_cookie.status &
-- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-- (vid == adapter->mng_vlan_id)) {
-- return;
-- }
- /* remove VID from filter table */
-- index = (vid >> 0x5) & 0x7F;
-+ index = (vid >> 0x5) & 0x7F;
- vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-- vfta &= ~(0x1 << (vid & 0x1F));
-+ vfta &= ~(0x1 << (vid & 0x1F));
- iegbe_write_vfta(&adapter->hw, index, vfta);
- }
-
--static void
--iegbe_restore_vlan(struct iegbe_adapter *adapter)
-+static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
- {
- iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
-
-- if(adapter->vlgrp) {
-- uint16_t vid;
-- for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
-- if(!adapter->vlgrp->vlan_devices[vid]) {
-+ if (adapter->vlgrp) {
-+ u16 vid;
-+ for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
-+ if (!vlan_group_get_device(adapter->vlgrp, vid))
- continue;
-- }
- iegbe_vlan_rx_add_vid(adapter->netdev, vid);
- }
- }
- }
--#endif
-
--int
--iegbe_set_spd_dplx(struct iegbe_adapter *adapter, uint16_t spddplx)
-+
-+int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
- {
-- adapter->hw.autoneg = 0;
-+ adapter->hw.autoneg = 0x0;
-
-- /* Fiber NICs only allow 1000 gbps Full duplex */
-- if((adapter->hw.media_type == iegbe_media_type_fiber
-+ /* Fiber NICs only allow 1000 gbps Full duplex */
-+ if((adapter->hw.media_type == iegbe_media_type_fiber
- || (adapter->hw.media_type == iegbe_media_type_oem
- && !iegbe_oem_phy_is_copper(&adapter->hw)))
-- && spddplx != (SPEED_1000 + FULL_DUPLEX)) {
-- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-- return -EINVAL;
-- }
--
-- switch(spddplx) {
-- case SPEED_10 + HALF_DUPLEX:
-- adapter->hw.forced_speed_duplex = iegbe_10_half;
-- break;
-- case SPEED_10 + FULL_DUPLEX:
-- adapter->hw.forced_speed_duplex = iegbe_10_full;
-- break;
-- case SPEED_100 + HALF_DUPLEX:
-- adapter->hw.forced_speed_duplex = iegbe_100_half;
-- break;
-- case SPEED_100 + FULL_DUPLEX:
-- adapter->hw.forced_speed_duplex = iegbe_100_full;
-- break;
-- case SPEED_1000 + FULL_DUPLEX:
-+ && spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-+ return -EINVAL;
-+ }
-+
-+ switch(spddplx) {
-+ case SPEED_10 + DUPLEX_HALF:
-+ adapter->hw.forced_speed_duplex = iegbe_10_half;
-+ break;
-+ case SPEED_10 + DUPLEX_FULL:
-+ adapter->hw.forced_speed_duplex = iegbe_10_full;
-+ break;
-+ case SPEED_100 + DUPLEX_HALF:
-+ adapter->hw.forced_speed_duplex = iegbe_100_half;
-+ break;
-+ case SPEED_100 + DUPLEX_FULL:
-+ adapter->hw.forced_speed_duplex = iegbe_100_full;
-+ break;
-+ case SPEED_1000 + DUPLEX_FULL:
- adapter->hw.autoneg = 0x1;
-- adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
-- break;
-- case SPEED_1000 + HALF_DUPLEX: /* not supported */
-- default:
-- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-- return -EINVAL;
-- }
-- return 0;
-+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
-+ break;
-+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
-+ default:
-+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
-+ return -EINVAL;
-+ }
-+ return 0x0;
- }
-
- static int
- iegbe_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
- {
-- struct pci_dev *pdev = NULL;
-+ struct pci_dev *pdev = NULL;
- pm_message_t state = {0x3};
-
-
-- switch(event) {
-- case SYS_DOWN:
-- case SYS_HALT:
-- case SYS_POWER_OFF:
-- while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-+ switch(event) {
-+ case SYS_DOWN:
-+ case SYS_HALT:
-+ case SYS_POWER_OFF:
-+ while((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
- if(pci_dev_driver(pdev) == &iegbe_driver) {
-- iegbe_suspend(pdev, state);
-- }
-- }
-+ iegbe_suspend(pdev, state);
-+ }
-+ }
- }
-- return NOTIFY_DONE;
-+ return NOTIFY_DONE;
- }
-
- static int
- iegbe_suspend(struct pci_dev *pdev, pm_message_t state)
- {
-- struct net_device *netdev = pci_get_drvdata(pdev);
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
-- uint32_t wufc = adapter->wol;
-- uint16_t cmd_word;
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
-+ uint32_t wufc = adapter->wol;
-+ uint16_t cmd_word;
-
-- netif_device_detach(netdev);
-+ netif_device_detach(netdev);
-
- if(netif_running(netdev)) {
-- iegbe_down(adapter);
-+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
-+ iegbe_down(adapter);
- }
-- /*
-- * ICP_XXXX style MACs do not have a link up bit in
-- * the STATUS register, query the PHY directly
-- */
-- if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-- status = E1000_READ_REG(&adapter->hw, STATUS);
-+ /*
-+ * ICP_XXXX style MACs do not have a link up bit in
-+ * the STATUS register, query the PHY directly
-+ */
-+ if(adapter->hw.mac_type != iegbe_icp_xxxx) {
-+ status = E1000_READ_REG(&adapter->hw, STATUS);
- if(status & E1000_STATUS_LU) {
-- wufc &= ~E1000_WUFC_LNKC;
-+ wufc &= ~E1000_WUFC_LNKC;
- }
-- } else {
-- int isUp = 0;
-+ } else {
-+ int isUp = 0x0;
- if(iegbe_oem_phy_is_link_up(&adapter->hw, &isUp) != E1000_SUCCESS) {
-- isUp = 0;
-+ isUp = 0x0;
- }
- if(isUp) {
-- wufc &= ~E1000_WUFC_LNKC;
-- }
-+ wufc &= ~E1000_WUFC_LNKC;
-+ }
- }
-
-- if(wufc) {
-- iegbe_setup_rctl(adapter);
-- iegbe_set_multi(netdev);
--
-- /* turn on all-multi mode if wake on multicast is enabled */
-- if(adapter->wol & E1000_WUFC_MC) {
-- rctl = E1000_READ_REG(&adapter->hw, RCTL);
-- rctl |= E1000_RCTL_MPE;
-- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-- }
-+ if(wufc) {
-+ iegbe_setup_rctl(adapter);
-+ iegbe_set_rx_mode(netdev);
-+
-+ /* turn on all-multi mode if wake on multicast is enabled */
-+ if(adapter->wol & E1000_WUFC_MC) {
-+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
-+ rctl |= E1000_RCTL_MPE;
-+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-+ }
-
-- if(adapter->hw.mac_type >= iegbe_82540) {
-- ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-- /* advertise wake from D3Cold */
-- #define E1000_CTRL_ADVD3WUC 0x00100000
-- /* phy power management enable */
-- ctrl |= E1000_CTRL_ADVD3WUC |
-- (adapter->hw.mac_type != iegbe_icp_xxxx
-- ? E1000_CTRL_EN_PHY_PWR_MGMT : 0);
-+ if(adapter->hw.mac_type >= iegbe_82540) {
-+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-+ /* advertise wake from D3Cold */
-+ #define E1000_CTRL_ADVD3WUC 0x00100000
-+ /* phy power management enable */
-+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-+ ctrl |= E1000_CTRL_ADVD3WUC |
-+ (adapter->hw.mac_type != iegbe_icp_xxxx
-+ ? E1000_CTRL_EN_PHY_PWR_MGMT : 0x0);
-
-- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-- }
-+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
-+ }
-
-- if(adapter->hw.media_type == iegbe_media_type_fiber ||
-- adapter->hw.media_type == iegbe_media_type_internal_serdes) {
-- /* keep the laser running in D3 */
-- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-- ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
-- E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
-- }
-+ if(adapter->hw.media_type == iegbe_media_type_fiber ||
-+ adapter->hw.media_type == iegbe_media_type_internal_serdes) {
-+ /* keep the laser running in D3 */
-+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
-+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
-+ }
-
- /* Allow OEM PHYs (if any exist) to keep the laser
- *running in D3 */
- iegbe_oem_fiber_live_in_suspend(&adapter->hw);
-
-- /* Allow time for pending master requests to run */
-- iegbe_disable_pciex_master(&adapter->hw);
-+ /* Allow time for pending master requests to run */
-+ iegbe_disable_pciex_master(&adapter->hw);
-
-- E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
-- E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
-+ E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
-+ E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
- pci_enable_wake(pdev, 0x3, 0x1);
- pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
-- } else {
-- E1000_WRITE_REG(&adapter->hw, WUC, 0);
-- E1000_WRITE_REG(&adapter->hw, WUFC, 0);
-- pci_enable_wake(pdev, 0x3, 0);
-- pci_enable_wake(pdev, 0x4, 0); /* 4 == D3 cold */
-- }
-+ } else {
-+ E1000_WRITE_REG(&adapter->hw, WUC, 0x0);
-+ E1000_WRITE_REG(&adapter->hw, WUFC, 0x0);
-+ pci_enable_wake(pdev, 0x3, 0x0);
-+ pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
-+ }
-
-- pci_save_state(pdev);
--
-- if(adapter->hw.mac_type >= iegbe_82540
-- && adapter->hw.mac_type != iegbe_icp_xxxx
-- && adapter->hw.media_type == iegbe_media_type_copper) {
-- manc = E1000_READ_REG(&adapter->hw, MANC);
-- if(manc & E1000_MANC_SMBUS_EN) {
-- manc |= E1000_MANC_ARP_EN;
-- E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+ pci_save_state(pdev);
-+
-+ if(adapter->hw.mac_type >= iegbe_82540
-+ && adapter->hw.mac_type != iegbe_icp_xxxx
-+ && adapter->hw.media_type == iegbe_media_type_copper) {
-+ manc = E1000_READ_REG(&adapter->hw, MANC);
-+ if(manc & E1000_MANC_SMBUS_EN) {
-+ manc |= E1000_MANC_ARP_EN;
-+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
- pci_enable_wake(pdev, 0x3, 0x1);
- pci_enable_wake(pdev, 0x4, 0x1); /* 4 == D3 cold */
-- }
-- }
-+ }
-+ }
-
-- switch(adapter->hw.mac_type) {
-- case iegbe_82571:
-- case iegbe_82572:
-- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-- break;
-- case iegbe_82573:
-- swsm = E1000_READ_REG(&adapter->hw, SWSM);
-- E1000_WRITE_REG(&adapter->hw, SWSM,
-- swsm & ~E1000_SWSM_DRV_LOAD);
-- break;
-- default:
-- break;
-- }
-+ switch(adapter->hw.mac_type) {
-+ case iegbe_82571:
-+ case iegbe_82572:
-+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-+ break;
-+ case iegbe_82573:
-+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
-+ E1000_WRITE_REG(&adapter->hw, SWSM,
-+ swsm & ~E1000_SWSM_DRV_LOAD);
-+ break;
-+ default:
-+ break;
-+ }
-
-- pci_disable_device(pdev);
-- if(adapter->hw.mac_type == iegbe_icp_xxxx) {
-- /*
-- * ICP xxxx devices are not true PCI devices, in the context
-- * of power management, disabling the bus mastership is not
-- * sufficient to disable the device, it is also necessary to
-- * disable IO, Memory, and Interrupts if they are enabled.
-- */
-- pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
-+ pci_disable_device(pdev);
-+ if(adapter->hw.mac_type == iegbe_icp_xxxx) {
-+ /*
-+ * ICP xxxx devices are not true PCI devices, in the context
-+ * of power management, disabling the bus mastership is not
-+ * sufficient to disable the device, it is also necessary to
-+ * disable IO, Memory, and Interrupts if they are enabled.
-+ */
-+ pci_read_config_word(pdev, PCI_COMMAND, &cmd_word);
- if(cmd_word & PCI_COMMAND_IO) {
-- cmd_word &= ~PCI_COMMAND_IO;
-+ cmd_word &= ~PCI_COMMAND_IO;
- }
- if(cmd_word & PCI_COMMAND_MEMORY) {
-- cmd_word &= ~PCI_COMMAND_MEMORY;
-+ cmd_word &= ~PCI_COMMAND_MEMORY;
- }
- if(cmd_word & PCI_COMMAND_INTX_DISABLE) {
-- cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
-+ cmd_word &= ~PCI_COMMAND_INTX_DISABLE;
- }
-- pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
-- }
-+ pci_write_config_word(pdev, PCI_COMMAND, cmd_word);
-+ }
-
-- state.event = (state.event > 0) ? 0x3 : 0;
-- pci_set_power_state(pdev, state.event);
-- if(gcu_suspend == 0)
-+ state.event = (state.event > 0x0) ? 0x3 : 0x0;
-+ pci_set_power_state(pdev, state.event);
-+ if(gcu_suspend == 0x0)
- {
- if(gcu == NULL) {
-- gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
-- }
-+ gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
-+ }
- gcu_iegbe_suspend(gcu, 0x3);
-- gcu_suspend = 1;
-- gcu_resume = 0;
-+ gcu_suspend = 0x1;
-+ gcu_resume = 0x0;
- }
-- return 0;
-+ return 0x0;
- }
-
- #ifdef CONFIG_PM
- static int
- iegbe_resume(struct pci_dev *pdev)
- {
-- struct net_device *netdev = pci_get_drvdata(pdev);
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- uint32_t manc, ret_val, swsm;
-- uint32_t ctrl_ext;
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ uint32_t manc, ret_val, swsm;
-+ uint32_t ctrl_ext;
- int offset;
- uint32_t vdid;
-
-- if(gcu_resume == 0)
-+ if(gcu_resume == 0x0)
- {
- if(gcu == NULL) {
-- gcu = pci_find_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
-+ gcu = pci_get_device(PCI_VENDOR_ID_INTEL, GCU_DEVID, NULL);
- pci_read_config_dword(gcu, 0x00, &vdid);
-- }
--
-+ }
-+
- if(gcu) {
- gcu_iegbe_resume(gcu);
-- gcu_resume = 1;
-- gcu_suspend = 0;
-+ gcu_resume = 0x1;
-+ gcu_suspend = 0x0;
- } else {
- printk("Unable to resume GCU!\n");
-- }
-+ }
- }
- pci_set_power_state(pdev, 0x0);
-- pci_restore_state(pdev);
-- ret_val = pci_enable_device(pdev);
-- pci_set_master(pdev);
-+ pci_restore_state(pdev);
-+ ret_val = pci_enable_device(pdev);
-+ pci_set_master(pdev);
-
- pci_enable_wake(pdev, 0x3, 0x0);
- pci_enable_wake(pdev, 0x4, 0x0); /* 4 == D3 cold */
-
-- iegbe_reset(adapter);
-- E1000_WRITE_REG(&adapter->hw, WUS, ~0);
-+ iegbe_reset(adapter);
-+ E1000_WRITE_REG(&adapter->hw, WUS, ~0);
- offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_ST)
- + PCI_ST_SMIA_OFFSET;
- pci_write_config_dword(adapter->pdev, offset, 0x00000006);
-@@ -5138,51 +4848,52 @@ iegbe_resume(struct pci_dev *pdev)
- E1000_WRITE_REG(&adapter->hw, IMC2, ~0UL);
-
- if(netif_running(netdev)) {
-- iegbe_up(adapter);
-+ iegbe_up(adapter);
- }
-- netif_device_attach(netdev);
--
-- if(adapter->hw.mac_type >= iegbe_82540
-- && adapter->hw.mac_type != iegbe_icp_xxxx
-- && adapter->hw.media_type == iegbe_media_type_copper) {
-- manc = E1000_READ_REG(&adapter->hw, MANC);
-- manc &= ~(E1000_MANC_ARP_EN);
-- E1000_WRITE_REG(&adapter->hw, MANC, manc);
-- }
-+ netif_device_attach(netdev);
-
-- switch(adapter->hw.mac_type) {
-- case iegbe_82571:
-- case iegbe_82572:
-- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-- break;
-- case iegbe_82573:
-- swsm = E1000_READ_REG(&adapter->hw, SWSM);
-- E1000_WRITE_REG(&adapter->hw, SWSM,
-- swsm | E1000_SWSM_DRV_LOAD);
-- break;
-- default:
-- break;
-- }
-+ if(adapter->hw.mac_type >= iegbe_82540
-+ && adapter->hw.mac_type != iegbe_icp_xxxx
-+ && adapter->hw.media_type == iegbe_media_type_copper) {
-+ manc = E1000_READ_REG(&adapter->hw, MANC);
-+ manc &= ~(E1000_MANC_ARP_EN);
-+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
-+ }
-+
-+ switch(adapter->hw.mac_type) {
-+ case iegbe_82571:
-+ case iegbe_82572:
-+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-+ break;
-+ case iegbe_82573:
-+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
-+ E1000_WRITE_REG(&adapter->hw, SWSM,
-+ swsm | E1000_SWSM_DRV_LOAD);
-+ break;
-+ default:
-+ break;
-+ }
-+#endif
-
-- return 0;
-+ return 0x0;
- }
--#endif
-+
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
--static void
--iegbe_netpoll(struct net_device *netdev)
-+static void iegbe_netpoll(struct net_device *netdev)
- {
-- struct iegbe_adapter *adapter = netdev_priv(netdev);
-- disable_irq(adapter->pdev->irq);
-- iegbe_intr(adapter->pdev->irq, netdev, NULL);
-- enable_irq(adapter->pdev->irq);
-+ struct iegbe_adapter *adapter = netdev_priv(netdev);
-+ disable_irq(adapter->pdev->irq);
-+ iegbe_intr(adapter->pdev->irq, netdev);
-+ enable_irq(adapter->pdev->irq);
- }
- #endif
-
-+
- /* iegbe_main.c */
---- a/Embedded/src/GbE/iegbe_oem_phy.c
-+++ b/Embedded/src/GbE/iegbe_oem_phy.c
-@@ -2,31 +2,31 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
-- This program is free software; you can redistribute it and/or modify
-+ This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
-- This program is distributed in the hope that it will be useful, but
-- WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ This program is distributed in the hope that it will be useful, but
-+ WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-- The full GNU General Public License is included in this distribution
-+ The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-+ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-
- *****************************************************************************/
- /**************************************************************************
-@@ -65,11 +65,6 @@ static int32_t iegbe_oem_link_m88_setup(
- static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
- static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
-
--/* Define specific BCM functions */
--static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
--static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
--static int32_t oi_phy_setup (struct iegbe_hw *hw);
--
- /**
- * iegbe_oem_setup_link
- * @hw: iegbe_hw struct containing device specific information
-@@ -84,7 +79,7 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- {
- #ifdef EXTERNAL_MDIO
-
-- /*
-+ /*
- * see iegbe_setup_copper_link() as the primary example. Look at both
- * the M88 and IGP functions that are called for ideas, possibly for
- * power management.
-@@ -102,14 +97,14 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- }
- /* AFU: add test to exit out if improper phy type
- */
-- /* relevent parts of iegbe_copper_link_preconfig */
-- ctrl = E1000_READ_REG(hw, CTRL);
-- ctrl |= E1000_CTRL_SLU;
-- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-- E1000_WRITE_REG(hw, CTRL, ctrl);
--
-+ /* relevent parts of iegbe_copper_link_preconfig */
-+ ctrl = E1000_READ_REG(hw, CTRL);
-+ ctrl |= E1000_CTRL_SLU;
-+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-+ E1000_WRITE_REG(hw, CTRL, ctrl);
-+
- /* this is required for *hw init */
-- ret_val = iegbe_oem_detect_phy(hw);
-+ ret_val = iegbe_oem_detect_phy(hw);
- if(ret_val) {
- return ret_val;
- }
-@@ -119,23 +114,13 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- }
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- return E1000_SUCCESS;
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_link_m88_setup(hw);
-- if(ret_val) {
-- return ret_val;
-- }
-- break;
-- case BCM5481_PHY_ID:
-- ret_val = iegbe_oem_link_bcm5481_setup(hw);
-- if(ret_val) {
-- return ret_val;
-+ if(ret_val) {
-+ return ret_val;
- }
-- break;
-+ break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return -E1000_ERR_PHY_TYPE;
-@@ -143,16 +128,16 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-
- if(hw->autoneg) {
- ret_val = iegbe_copper_link_autoneg(hw);
-- if(ret_val) {
-- return ret_val;
-- }
-+ if(ret_val) {
-+ return ret_val;
- }
-+ }
- else {
- DEBUGOUT("Forcing speed and duplex\n");
- ret_val = iegbe_phy_force_speed_duplex(hw);
- }
--
-- /*
-+
-+ /*
- * Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
-@@ -194,51 +179,6 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
-
--/**
-- * iegbe_oem_link_bcm5481_setup
-- * @hw: iegbe_hw struct containing device specific information
-- *
-- * Returns E1000_SUCCESS, negative E1000 error code on failure
-- *
-- * copied verbatim from iegbe_oem_link_m88_setup
-- **/
--static int32_t
--iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
--{
-- int32_t ret_val;
-- uint16_t phy_data;
--
-- //DEBUGFUNC(__func__);
--
-- if(!hw)
-- return -1;
--
-- /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
-- if(hw->phy_reset_disable)
-- return E1000_SUCCESS;
--
-- // Enable MDIX in extended control reg.
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
-- if(ret_val)
-- {
-- DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
-- return ret_val;
-- }
--
-- phy_data &= ~BCM5481_ECTRL_DISMDIX;
-- ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
-- if(ret_val)
-- {
-- DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
-- return ret_val;
-- }
--
-- ret_val = oi_phy_setup (hw);
-- if (ret_val)
-- return ret_val;
--
-- return E1000_SUCCESS;
--}
-
- /**
- * iegbe_oem_link_m88_setup
-@@ -253,7 +193,7 @@ static int32_t
- iegbe_oem_link_m88_setup(struct iegbe_hw *hw)
- {
- int32_t ret_val;
-- uint16_t phy_data;
-+ uint16_t phy_data = 0;
-
- DEBUGFUNC1("%s",__func__);
-
-@@ -261,7 +201,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- return -1;
- }
-
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
- &phy_data);
- phy_data |= 0x00000008;
- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-@@ -279,7 +219,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-
- phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
-- /*
-+ /*
- * Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
-@@ -305,7 +245,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- break;
- }
-
-- /*
-+ /*
- * Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
-@@ -316,25 +256,25 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
-
- if(hw->disable_polarity_correction == 1) {
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-- }
-+ }
- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
- return ret_val;
- }
-
-- /*
-+ /*
- * Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
- return ret_val;
- }
-
-- /*
-+ /*
- * For Truxton, it is necessary to add RGMII tx and rx
- * timing delay though the EXT_PHY_SPEC_CTRL register
- */
-@@ -350,13 +290,13 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- }
-- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read M88E1000_EXT_PHY_SPEC_CTRL register\n");
- return ret_val;
- }
--
-+
-
- /* SW Reset the PHY so all changes take effect */
- ret_val = iegbe_phy_hw_reset(hw);
-@@ -371,7 +311,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- /**
- * iegbe_oem_force_mdi
- * @hw: iegbe_hw struct containing device specific information
-- * @resetPhy: returns true if after calling this function the
-+ * @resetPhy: returns true if after calling this function the
- * PHY requires a reset
- *
- * Returns E1000_SUCCESS, negative E1000 error code on failure
-@@ -379,7 +319,7 @@ iegbe_oem_link_m88_setup(struct iegbe_hw
- * This is called from iegbe_phy_force_speed_duplex, which is
- * called from iegbe_oem_setup_link.
- **/
--int32_t
-+int32_t
- iegbe_oem_force_mdi(struct iegbe_hw *hw, int *resetPhy)
- {
- #ifdef EXTERNAL_MDIO
-@@ -393,35 +333,30 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
- return -1;
- }
-
-- /*
-+ /*
- * a boolean to indicate if the phy needs to be reset
-- *
-+ *
- * Make note that the M88 phy is what'll be used on Truxton
- * see iegbe_phy_force_speed_duplex, which does the following for M88
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-- M88E1000_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+ M88E1000_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
- return ret_val;
- }
--
-+
- /*
-- * Clear Auto-Crossover to force MDI manually. M88E1000 requires
-+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires
- * MDI forced whenever speed are duplex are forced.
- */
--
-+
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
-@@ -458,7 +393,7 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
- * This is called from iegbe_phy_force_speed_duplex, which is
- * called from iegbe_oem_setup_link.
- **/
--int32_t
-+int32_t
- iegbe_oem_phy_reset_dsp(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -478,10 +413,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
- * no-op.
- */
- switch (hw->phy_id) {
-- case M88E1000_I_PHY_ID:
-- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
-+ case M88E1000_I_PHY_ID:
-+ case M88E1141_E_PHY_ID:
- DEBUGOUT("No DSP to reset on OEM PHY\n");
- break;
- default:
-@@ -508,7 +441,7 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
- * This is called from iegbe_phy_force_speed_duplex, which is
- * called from iegbe_oem_setup_link.
- **/
--int32_t
-+int32_t
- iegbe_oem_cleanup_after_phy_reset(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -520,29 +453,24 @@ iegbe_oem_cleanup_after_phy_reset(struct
-
- if(!hw) {
- return -1;
-- }
-+ }
-
-- /*
-+ /*
- * Make note that the M88 phy is what'll be used on Truxton.
- * see iegbe_phy_force_speed_duplex, which does the following for M88
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /*
-- * Because we reset the PHY above, we need to re-force
-+ * Because we reset the PHY above, we need to re-force
- * TX_CLK in the Extended PHY Specific Control Register to
- * 25MHz clock. This value defaults back to a 2.5MHz clock
- * when the PHY is reset.
- */
-
- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-- M88E1000_EXT_PHY_SPEC_CTRL,
-+ M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read M88E1000_EXT_SPEC_CTRL register\n");
-@@ -550,22 +478,23 @@ iegbe_oem_cleanup_after_phy_reset(struct
- }
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-- ret_val = iegbe_oem_write_phy_reg_ex(hw,
-- M88E1000_EXT_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw,
-+ M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val) {
-- DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL register\n");
-+ DEBUGOUT("Unable to write M88E1000_EXT_PHY_SPEC_CTRL "
-+ "register\n");
- return ret_val;
- }
-
- /*
- * In addition, because of the s/w reset above, we need to enable
-- * CRX on TX. This must be set for both full and half duplex
-+ * CRX on TX. This must be set for both full and half duplex
- * operation.
- */
-
-- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-- M88E1000_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+ M88E1000_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read M88E1000_PHY_SPEC_CTRL register\n");
-@@ -573,12 +502,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
- }
-
- phy_data &= ~M88E1000_PSCR_ASSERT_CRS_ON_TX;
-- ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
- phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to write M88E1000_PHY_SPEC_CTRL register\n");
- return ret_val;
-- }
-+ }
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
-@@ -604,12 +533,12 @@ iegbe_oem_cleanup_after_phy_reset(struct
- * This is called from iegbe_oem_setup_link which is
- * called from iegbe_setup_link.
- **/
--static int32_t
-+static int32_t
- iegbe_oem_set_phy_mode(struct iegbe_hw *hw)
- {
- /*
- * it is unclear if it is necessary to set the phy mode. Right now only
-- * one MAC 82545 Rev 3 does it, but the other MACs like Tolapai do not.
-+ * one MAC 82545 Rev 3 does it, but the other MACs like tola do not.
- * Leave the functionality off for now until it is determined that Tolapai
- * needs it as well.
- */
-@@ -638,41 +567,37 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
- #ifndef skip_set_mode
- DEBUGOUT("No need to call oem_set_phy_mode on Truxton\n");
- #else
-- /*
-+ /*
- * Make note that the M88 phy is what'll be used on Truxton.
- *
- * use iegbe_set_phy_mode as example
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_read_eeprom(hw,
-- EEPROM_PHY_CLASS_WORD,
-- 1,
-+ ret_val = iegbe_read_eeprom(hw,
-+ EEPROM_PHY_CLASS_WORD,
-+ 1,
- &eeprom_data);
- if(ret_val) {
- return ret_val;
- }
-
-- if((eeprom_data != EEPROM_RESERVED_WORD) &&
-- (eeprom_data & EEPROM_PHY_CLASS_A))
-+ if((eeprom_data != EEPROM_RESERVED_WORD) &&
-+ (eeprom_data & EEPROM_PHY_CLASS_A))
- {
-- ret_val = iegbe_oem_write_phy_reg_ex(hw,
-- M88E1000_PHY_PAGE_SELECT,
-- 0x000B);
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw,
-+ M88E1000_PHY_PAGE_SELECT,
-+ 0x000B);
- if(ret_val) {
-- DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT register on PHY\n");
-+ DEBUGOUT("Unable to write to M88E1000_PHY_PAGE_SELECT "
-+ "register on PHY\n");
- return ret_val;
- }
-
-- ret_val = iegbe_oem_write_phy_reg_ex(hw,
-- M88E1000_PHY_GEN_CONTROL,
-- 0x8104);
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw,
-+ M88E1000_PHY_GEN_CONTROL,
-+ 0x8104);
- if(ret_val) {
- DEBUGOUT("Unable to write to M88E1000_PHY_GEN_CONTROL"
- "register on PHY\n");
-@@ -687,11 +612,12 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
- return -E1000_ERR_PHY_TYPE;
- }
- #endif
--
-+
- return E1000_SUCCESS;
-
- }
-
-+
- /**
- * iegbe_oem_detect_phy
- * @hw: iegbe_hw struct containing device specific information
-@@ -702,7 +628,7 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
- *
- * This borrows heavily from iegbe_detect_gig_phy
- **/
--static int32_t
-+static int32_t
- iegbe_oem_detect_phy(struct iegbe_hw *hw)
- {
- int32_t ret_val;
-@@ -715,33 +641,20 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
- }
- hw->phy_type = iegbe_phy_oem;
-
--{
-- // If MAC2 (BCM5395 switch), manually detect the phy
-- struct iegbe_adapter *adapter;
-- uint32_t device_number;
-- adapter = (struct iegbe_adapter *) hw->back;
-- device_number = PCI_SLOT(adapter->pdev->devfn);
-- if (device_number == ICP_XXXX_MAC_2) {
-- hw->phy_id = BCM5395S_PHY_ID;
-- hw->phy_revision = 0;
-- return E1000_SUCCESS;
-- }
--}
--
--
- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
- if(ret_val) {
- DEBUGOUT("Unable to read PHY register PHY_ID1\n");
- return ret_val;
- }
--
-+
- usec_delay(0x14);
- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID2, &phy_id_low);
- if(ret_val) {
- DEBUGOUT("Unable to read PHY register PHY_ID2\n");
- return ret_val;
- }
-- hw->phy_id = (uint32_t) ((phy_id_high << 0x10) + phy_id_low);
-+ hw->phy_id = (uint32_t) ((phy_id_high << 0x10) +
-+ (phy_id_low & PHY_REVISION_MASK));
- hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
-
- return E1000_SUCCESS;
-@@ -753,15 +666,15 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
- * @hw: iegbe_hw struct containing device specific information
- *
- * Returns the value of the Inter Packet Gap (IPG) Transmit Time (IPGT) in the
-- * Transmit IPG register appropriate for the given PHY. This field is only 10
-+ * Transmit IPG register appropriate for the given PHY. This field is only 10
- * bits wide.
- *
- * In the original iegbe code, only the IPGT field varied between media types.
-- * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would
-+ * If the OEM phy requires setting IPG Receive Time 1 & 2 Registers, it would
- * be required to modify the iegbe_config_tx() function to accomdate the change
- *
- **/
--uint32_t
-+uint32_t
- iegbe_oem_get_tipg(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -777,15 +690,13 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
- phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return DEFAULT_ICP_XXXX_TIPG_IPGT;
- }
--
-+
- return phy_num;
-
- #else /* ifdef EXTERNAL_MDIO */
-@@ -803,15 +714,15 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
- * iegbe_oem_phy_is_copper
- * @hw: iegbe_hw struct containing device specific information
- *
-- * Test for media type within the iegbe driver is common, so this is a simple
-- * test for copper PHYs. The ICP_XXXX family of controllers initially only
-- * supported copper interconnects (no TBI (ten bit interface) for Fiber
-- * existed). If future revs support either Fiber or an internal SERDES, it
-- * may become necessary to evaluate where this function is used to go beyond
-+ * Test for media type within the iegbe driver is common, so this is a simple
-+ * test for copper PHYs. The ICP_XXXX family of controllers initially only
-+ * supported copper interconnects (no TBI (ten bit interface) for Fiber
-+ * existed). If future revs support either Fiber or an internal SERDES, it
-+ * may become necessary to evaluate where this function is used to go beyond
- * determining whether or not media type is just copper.
- *
- **/
--int
-+int
- iegbe_oem_phy_is_copper(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -827,23 +738,21 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
- isCopper = TRUE;
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return -E1000_ERR_PHY_TYPE;
- }
--
-+
- return isCopper;
-
- #else /* ifdef EXTERNAL_MDIO */
-
-- /*
-+ /*
- * caught between returning true or false. True allows it to
- * be entered into && statements w/o ill effect, but false
-- * would make more sense
-+ * would make more sense
- */
- DEBUGOUT("Invalid value for transceiver type, return FALSE\n");
- return FALSE;
-@@ -856,19 +765,19 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
- * iegbe_oem_get_phy_dev_number
- * @hw: iegbe_hw struct containing device specific information
- *
-- * For ICP_XXXX family of devices, there are 3 MACs, each of which may
-- * have a different PHY (and indeed a different media interface). This
-- * function is used to indicate which of the MAC/PHY pairs we are interested
-+ * For ICP_XXXX family of devices, there are 3 MACs, each of which may
-+ * have a different PHY (and indeed a different media interface). This
-+ * function is used to indicate which of the MAC/PHY pairs we are interested
- * in.
-- *
-+ *
- **/
--uint32_t
-+uint32_t
- iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-
-- /*
-- * for ICP_XXXX family of devices, the three network interfaces are
-+ /*
-+ * for ICP_XXXX family of devices, the three network interfaces are
- * differentiated by their PCI device number, where the three share
- * the same PCI bus
- */
-@@ -886,15 +795,15 @@ iegbe_oem_get_phy_dev_number(struct iegb
-
- switch(device_number)
- {
-- case ICP_XXXX_MAC_0:
-+ case ICP_XXXX_MAC_0:
-+ hw->phy_addr = 0x00;
-+ break;
-+ case ICP_XXXX_MAC_1:
- hw->phy_addr = 0x01;
- break;
-- case ICP_XXXX_MAC_1:
-+ case ICP_XXXX_MAC_2:
- hw->phy_addr = 0x02;
- break;
-- case ICP_XXXX_MAC_2:
-- hw->phy_addr = 0x00;
-- break;
- default: hw->phy_addr = 0x00;
- }
- return hw->phy_addr;
-@@ -915,7 +824,7 @@ iegbe_oem_get_phy_dev_number(struct iegb
- * @cmd: the original IOCTL command that instigated the call chain.
- *
- * This function abstracts out the code necessary to service the
-- * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs.
-+ * SIOCSMIIREG case within the iegbe_mii_ioctl() for oem PHYs.
- * iegbe_mii_ioctl() was implemented for copper phy's only and this
- * function will only be called if iegbe_oem_phy_is_copper() returns true for
- * a given MAC. Note that iegbe_mii_ioctl() has a compile flag
-@@ -924,14 +833,14 @@ iegbe_oem_get_phy_dev_number(struct iegb
- * NOTE: a spinlock is in effect for the duration of this call. It is
- * imperative that a negative value be returned on any error, so
- * the spinlock can be released properly.
-- *
-+ *
- **/
- int
- iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
- struct ifreq *ifr, int cmd)
- {
- #ifdef EXTERNAL_MDIO
--
-+
- struct mii_ioctl_data *data = if_mii(ifr);
- uint16_t mii_reg = data->val_in;
- uint16_t spddplx;
-@@ -942,12 +851,6 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
- if(!adapter || !ifr) {
- return -1;
- }
--
-- // If MAC2 (BCM5395 switch) then leave now
-- if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
-- return -1;
-- }
--
- switch (data->reg_num) {
- case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN) {
-@@ -956,7 +859,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
- if(mii_reg & MII_CR_AUTO_NEG_EN) {
- adapter->hw.autoneg = 1;
- adapter->hw.autoneg_advertised = ICP_XXXX_AUTONEG_ADV_DEFAULT;
-- }
-+ }
- else {
- if(mii_reg & 0x40) {
- spddplx = SPEED_1000;
-@@ -976,7 +879,7 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
- if(netif_running(adapter->netdev)) {
- iegbe_down(adapter);
- iegbe_up(adapter);
-- }
-+ }
- else {
- iegbe_reset(adapter);
- }
-@@ -1043,10 +946,10 @@ void iegbe_oem_fiber_live_in_suspend(str
- * Note: The call to iegbe_get_regs() assumed an array of 24 elements
- * where the last 11 are passed to this function. If the array
- * that is passed to the calling function has its size or element
-- * defintions changed, this function becomes broken.
-+ * defintions changed, this function becomes broken.
- *
- **/
--void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
-+void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
- uint32_t data_len)
- {
- #define EXPECTED_ARRAY_LEN 11
-@@ -1062,13 +965,13 @@ void iegbe_oem_get_phy_regs(struct iegbe
- * Use the corrected_length variable to make sure we don't exceed that
- * length
- */
-- corrected_len = data_len>EXPECTED_ARRAY_LEN
-+ corrected_len = data_len>EXPECTED_ARRAY_LEN
- ? EXPECTED_ARRAY_LEN : data_len;
- memset(data, 0, corrected_len*sizeof(uint32_t));
-
- #ifdef EXTERNAL_MDIO
-
-- /*
-+ /*
- * Fill data[] with...
- *
- * [0] = cable length
-@@ -1084,16 +987,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
- * [10] = mdix mode
- */
- switch (adapter->hw.phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- if(corrected_len > 0) {
-- iegbe_oem_read_phy_reg_ex(&adapter->hw,
-- M88E1000_PHY_SPEC_STATUS,
-+ iegbe_oem_read_phy_reg_ex(&adapter->hw,
-+ M88E1000_PHY_SPEC_STATUS,
- (uint16_t *) &data[0]);
- }
- if(corrected_len > 0x1){
-@@ -1106,7 +1004,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
- data[0x3] = 0x0; /* Dummy (to align w/ IGP phy reg dump) */
- }
- if(corrected_len > 0x4) {
-- iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL,
-+ iegbe_oem_read_phy_reg_ex(&adapter->hw, M88E1000_PHY_SPEC_CTRL,
- (uint16_t *) &data[0x4]);
- }
- if(corrected_len > 0x5) {
-@@ -1144,7 +1042,7 @@ void iegbe_oem_get_phy_regs(struct iegbe
- * This is called from iegbe_set_phy_loopback in response from call from
- * ethtool to place the PHY into loopback mode.
- **/
--int
-+int
- iegbe_oem_phy_loopback(struct iegbe_adapter *adapter)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1165,23 +1063,18 @@ iegbe_oem_phy_loopback(struct iegbe_adap
- * was that nonintegrated called iegbe_phy_reset_clk_and_crs(),
- * hopefully this won't matter as CRS required for half-duplex
- * operation and this is set to full duplex.
-- *
-+ *
- * Make note that the M88 phy is what'll be used on Truxton
- * Loopback configuration is the same for each of the supported PHYs.
- */
- switch (adapter->hw.phy_id) {
-- case BCM5395S_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-
- adapter->hw.autoneg = FALSE;
-
- /* turn off Auto-MDI/MDIX */
-- /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw,
-+ /*ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw,
- M88E1000_PHY_SPEC_CTRL, 0x0808);
- if(ret_val)
- {
-@@ -1206,10 +1099,10 @@ iegbe_oem_phy_loopback(struct iegbe_adap
- DEBUGOUT("Unable to write to register PHY_CTRL\n");
- return ret_val;
- }
--
--
-+
-+
- /* force 1000, set loopback */
-- /*ret_val =
-+ /*ret_val =
- iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x4140); */
- ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL, 0x6100);
- if(ret_val) {
-@@ -1228,21 +1121,21 @@ iegbe_oem_phy_loopback(struct iegbe_adap
- E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
-
- /*
-- * Write out to PHY registers 29 and 30 to disable the Receiver.
-+ * Write out to PHY registers 29 and 30 to disable the Receiver.
- * This directly lifted from iegbe_phy_disable_receiver().
-- *
-+ *
- * The code is currently commented out as for the M88 used in
- * Truxton, registers 29 and 30 are unutilized. Leave in, just
-- * in case we are on the receiving end of an 'undocumented'
-+ * in case we are on the receiving end of an 'undocumented'
- * feature
- */
-- /*
-+ /*
- * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001F);
- * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FFC);
- * iegbe_oem_write_phy_reg_ex(&adapter->hw, 29, 0x001A);
- * iegbe_oem_write_phy_reg_ex(&adapter->hw, 30, 0x8FF0);
- */
--
-+
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
-@@ -1268,15 +1161,15 @@ iegbe_oem_phy_loopback(struct iegbe_adap
- * ethtool to place the PHY out of loopback mode. This handles the OEM
- * specific part of loopback cleanup.
- **/
--void
-+void
- iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter)
- {
- #ifdef EXTERNAL_MDIO
-
-- /*
-- * This borrows liberally from iegbe_loopback_cleanup().
-+ /*
-+ * This borrows liberally from iegbe_loopback_cleanup().
- * making note that the M88 phy is what'll be used on Truxton
-- *
-+ *
- * Loopback cleanup is the same for all supported PHYs.
- */
- int32_t ret_val;
-@@ -1289,38 +1182,32 @@ iegbe_oem_loopback_cleanup(struct iegbe_
- }
-
- switch (adapter->hw.phy_id) {
-- case BCM5395S_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
-- return;
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
- default:
- adapter->hw.autoneg = TRUE;
--
-- ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL,
-+
-+ ret_val = iegbe_oem_read_phy_reg_ex(&adapter->hw, PHY_CTRL,
- &phy_reg);
- if(ret_val) {
- DEBUGOUT("Unable to read to register PHY_CTRL\n");
- return;
- }
--
-+
- if(phy_reg & MII_CR_LOOPBACK) {
- phy_reg &= ~MII_CR_LOOPBACK;
--
-- ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL,
-+
-+ ret_val = iegbe_oem_write_phy_reg_ex(&adapter->hw, PHY_CTRL,
- phy_reg);
- if(ret_val) {
- DEBUGOUT("Unable to write to register PHY_CTRL\n");
- return;
- }
--
-+
- iegbe_phy_reset(&adapter->hw);
- }
- }
--
-+
- #endif /* ifdef EXTERNAL_MDIO */
- return;
-
-@@ -1336,7 +1223,7 @@ iegbe_oem_loopback_cleanup(struct iegbe_
- * Called by iegbe_check_downshift(), checks the PHY to see if it running
- * at as speed slower than its maximum.
- **/
--uint32_t
-+uint32_t
- iegbe_oem_phy_speed_downgraded(struct iegbe_hw *hw, uint16_t *isDowngraded)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1356,24 +1243,19 @@ iegbe_oem_phy_speed_downgraded(struct ie
- */
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- *isDowngraded = 0;
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
- return ret_val;
- }
--
-- *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT)
-+
-+ *isDowngraded = (phy_data & M88E1000_PSSR_DOWNSHIFT)
- >> M88E1000_PSSR_DOWNSHIFT_SHIFT;
--
-- break;
-+
-+ break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return 1;
-@@ -1388,7 +1270,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
- }
-
- *isDowngraded = 0;
-- return 0;
-+ return 0;
-
- #endif /* ifdef EXTERNAL_MDIO */
- }
-@@ -1403,7 +1285,7 @@ iegbe_oem_phy_speed_downgraded(struct ie
- * Called by iegbe_check_downshift(), checks the PHY to see if it running
- * at as speed slower than its maximum.
- **/
--int32_t
-+int32_t
- iegbe_oem_check_polarity(struct iegbe_hw *hw, uint16_t *polarity)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1417,33 +1299,27 @@ iegbe_oem_check_polarity(struct iegbe_hw
- return -1;
- }
-
-- /*
-+ /*
- * borrow liberally from iegbe_check_polarity.
- * Make note that the M88 phy is what'll be used on Truxton
- */
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- *polarity = 0;
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /* return the Polarity bit in the Status register. */
-- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-- M88E1000_PHY_SPEC_STATUS,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+ M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
- return ret_val;
- }
-
-- *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY)
-+ *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY)
- >> M88E1000_PSSR_REV_POLARITY_SHIFT;
--
-- break;
--
-+
-+ break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return -E1000_ERR_PHY_TYPE;
-@@ -1472,7 +1348,7 @@ iegbe_oem_check_polarity(struct iegbe_hw
- * the MAC with the PHY. It turns out on ICP_XXXX, this is not
- * done automagically.
- **/
--int32_t
-+int32_t
- iegbe_oem_phy_is_full_duplex(struct iegbe_hw *hw, int *isFD)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1485,40 +1361,22 @@ iegbe_oem_phy_is_full_duplex(struct iegb
- if(!hw || !isFD) {
- return -1;
- }
-- /*
-+ /*
- * Make note that the M88 phy is what'll be used on Truxton
- * see iegbe_config_mac_to_phy
- */
--
-+
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- /* Always full duplex */
-- *isFD = 1;
-- break;
--
-- case BCM5481_PHY_ID:
-- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-- if(ret_val) return ret_val;
--
-- switch (BCM5481_ASTAT_HCD(phy_data)) {
-- case BCM5481_ASTAT_1KBTFD:
-- case BCM5481_ASTAT_100BTXFD:
-- *isFD = 1;
-- break;
-- default:
-- *isFD = 0;
-- }
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-- if(ret_val) {
-- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-- return ret_val;
-- }
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+ &phy_data);
-+ if(ret_val) {
-+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-+ return ret_val;
-+ }
- *isFD = (phy_data & M88E1000_PSSR_DPLX) != 0;
--
-+
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
-@@ -1546,7 +1404,7 @@ iegbe_oem_phy_is_full_duplex(struct iegb
- * the MAC with the PHY. It turns out on ICP_XXXX, this is not
- * done automagically.
- **/
--int32_t
-+int32_t
- iegbe_oem_phy_is_speed_1000(struct iegbe_hw *hw, int *is1000)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1565,28 +1423,10 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
- */
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- /* Always 1000mb */
-- *is1000 = 1;
-- break;
--
-- case BCM5481_PHY_ID:
-- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-- if(ret_val) return ret_val;
--
-- switch (BCM5481_ASTAT_HCD(phy_data)) {
-- case BCM5481_ASTAT_1KBTFD:
-- case BCM5481_ASTAT_1KBTHD:
-- *is1000 = 1;
-- break;
-- default:
-- *is1000 = 0;
-- }
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+ &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
- return ret_val;
-@@ -1638,28 +1478,9 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
- * see iegbe_config_mac_to_phy
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- /* Always 1000Mb, never 100mb */
-- *is100 = 0;
-- break;
--
-- case BCM5481_PHY_ID:
-- ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-- if(ret_val) return ret_val;
--
-- switch (BCM5481_ASTAT_HCD(phy_data)) {
-- case BCM5481_ASTAT_100BTXFD:
-- case BCM5481_ASTAT_100BTXHD:
-- *is100 = 1;
-- break;
-- default:
-- *is100 = 0;
-- }
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
- M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val) {
-@@ -1714,29 +1535,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
- * see iegbe_phy_m88_get_info
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- /* The downshift status is checked only once, after link is
-- * established and it stored in the hw->speed_downgraded parameter.*/
-+ /* The downshift status is checked only once, after link is
-+ * established and it stored in the hw->speed_downgraded parameter.*/
- phy_info->downshift = (iegbe_downshift)hw->speed_downgraded;
--
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
-+
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_CTRL,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_CTRL\n");
- return ret_val;
- }
-
-- phy_info->extended_10bt_distance =
-- (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE)
-+ phy_info->extended_10bt_distance =
-+ (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE)
- >> M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT;
- phy_info->polarity_correction =
-- (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
-+ (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
- >> M88E1000_PSCR_POLARITY_REVERSAL_SHIFT;
-
- /* Check polarity status */
-@@ -1747,11 +1563,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-
- phy_info->cable_polarity = polarity;
-
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val) {
-- DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-- return ret_val;
-+ DEBUGOUT("Unable to read register M88E1000_PHY_SPEC_STATUS\n");
-+ return ret_val;
- }
-
- phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX)
-@@ -1761,24 +1577,24 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
- /* Cable Length Estimation and Local/Remote Receiver Information
- * are only valid at 1000 Mbps.
- */
-- phy_info->cable_length =
-+ phy_info->cable_length =
- (phy_data & M88E1000_PSSR_CABLE_LENGTH)
- >> M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_1000T_STATUS,
- &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register PHY_1000T_STATUS\n");
- return ret_val;
- }
-
-- phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
-+ phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
- >> SR_1000T_LOCAL_RX_STATUS_SHIFT;
--
-- phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
-+
-+ phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
- >> SR_1000T_REMOTE_RX_STATUS_SHIFT;
- }
--
-+
- break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
-@@ -1801,7 +1617,7 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
- * This function will perform a software initiated reset of
- * the PHY
- **/
--int32_t
-+int32_t
- iegbe_oem_phy_hw_reset(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1815,18 +1631,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
- return -1;
- }
- /*
-- * This code pretty much copies the default case from
-+ * This code pretty much copies the default case from
- * iegbe_phy_reset() as that is what is appropriate for
-- * the M88 used in truxton.
-+ * the M88 used in truxton.
- */
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register PHY_CTRL\n");
-@@ -1864,7 +1675,7 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
- * to perform and post reset initialiation. Not all PHYs require
- * this, which is why it was split off as a seperate function.
- **/
--void
-+void
- iegbe_oem_phy_init_script(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1877,19 +1688,17 @@ iegbe_oem_phy_init_script(struct iegbe_h
-
- /* call the GCU func that can do any phy specific init
- * functions after a reset
-- *
-+ *
- * Make note that the M88 phy is what'll be used on Truxton
- *
-- * The closest thing is in iegbe_phy_init_script, however this is
-+ * The closest thing is in iegbe_phy_init_script, however this is
- * for the IGP style of phy. This is probably a no-op for truxton
- * but may be needed by OEM's later on
-- *
-+ *
- */
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
- DEBUGOUT("Nothing to do for OEM PHY Init");
- break;
- default:
-@@ -1926,13 +1735,8 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
- return -1;
- }
-
-- if (hw->phy_id == BCM5395S_PHY_ID) {
-- DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
-- return -1;
-- }
--
- /* call the GCU func that will read the phy
-- *
-+ *
- * Make note that the M88 phy is what'll be used on Truxton.
- *
- * The closest thing is in iegbe_read_phy_reg_ex.
-@@ -1940,7 +1744,7 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
- * NOTE: this is 1 (of 2) functions that is truly dependant on the
- * gcu module
- */
--
-+
- ret_val = gcu_read_eth_phy(iegbe_oem_get_phy_dev_number(hw),
- reg_addr, phy_data);
- if(ret_val) {
-@@ -1962,10 +1766,10 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
- *
- * Returns E1000_SUCCESS, negative E1000 error code on failure
- *
-- * This is called from iegbe_config_mac_to_phy. Various supported
-+ * This is called from iegbe_config_mac_to_phy. Various supported
- * Phys may require the RGMII/RMII Translation gasket be set to RMII.
- **/
--int32_t
-+int32_t
- iegbe_oem_set_trans_gasket(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -1978,17 +1782,12 @@ iegbe_oem_set_trans_gasket(struct iegbe_
- }
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /* Gasket set correctly for Marvell Phys, so nothing to do */
- break;
- /* Add your PHY_ID here if your device requires an RMII interface
-- case YOUR_PHY_ID:
-+ case YOUR_PHY_ID:
- ctrl_aux_reg = E1000_READ_REG(hw, CTRL_AUX);
- ctrl_aux_reg |= E1000_CTRL_AUX_ICP_xxxx_MII_TGS; // Set the RGMII_RMII bit
- */
-@@ -2032,7 +1831,7 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
- return -1;
- }
- /* call the GCU func that will write to the phy
-- *
-+ *
- * Make note that the M88 phy is what'll be used on Truxton.
- *
- * The closest thing is in iegbe_write_phy_reg_ex
-@@ -2062,11 +1861,11 @@ iegbe_oem_write_phy_reg_ex(struct iegbe_
- * @hw struct iegbe_hw hardware specific data
- *
- * iegbe_reset_hw is called to reset the MAC. If, for
-- * some reason the PHY needs to be reset as well, this
-+ * some reason the PHY needs to be reset as well, this
- * should return TRUE and then iegbe_oem_phy_hw_reset()
- * will be called.
- **/
--int
-+int
- iegbe_oem_phy_needs_reset_with_mac(struct iegbe_hw *hw)
- {
- #ifdef EXTERNAL_MDIO
-@@ -2079,16 +1878,14 @@ iegbe_oem_phy_needs_reset_with_mac(struc
- return FALSE;
- }
-
-- /*
-+ /*
- * From the original iegbe driver, the M88
-- * PHYs did not seem to need this reset,
-+ * PHYs did not seem to need this reset,
- * so returning FALSE.
- */
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
- ret_val = FALSE;
- break;
- default:
-@@ -2116,7 +1913,7 @@ iegbe_oem_phy_needs_reset_with_mac(struc
- * tweaking of the PHY, for PHYs that support a DSP.
- *
- **/
--int32_t
-+int32_t
- iegbe_oem_config_dsp_after_link_change(struct iegbe_hw *hw,
- int link_up)
- {
-@@ -2138,8 +1935,6 @@ iegbe_oem_config_dsp_after_link_change(s
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- case BCM5481_PHY_ID:
-- case BCM5395S_PHY_ID:
- DEBUGOUT("No DSP to configure on OEM PHY");
- break;
- default:
-@@ -2165,7 +1960,7 @@ iegbe_oem_config_dsp_after_link_change(s
- *
- *
- **/
--int32_t
-+int32_t
- iegbe_oem_get_cable_length(struct iegbe_hw *hw,
- uint16_t *min_length,
- uint16_t *max_length)
-@@ -2177,21 +1972,15 @@ iegbe_oem_get_cable_length(struct iegbe_
- uint16_t phy_data;
-
- DEBUGFUNC1("%s",__func__);
--
-+
- if(!hw || !min_length || !max_length) {
- return -1;
- }
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- case BCM5481_PHY_ID:
-- *min_length = 0;
-- *max_length = iegbe_igp_cable_length_150;
-- break;
--
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw,
- M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val) {
-@@ -2246,13 +2035,13 @@ iegbe_oem_get_cable_length(struct iegbe_
- /**
- * iegbe_oem_phy_is_link_up
- * @hw iegbe_hw struct containing device specific information
-- * @isUp a boolean returning true if link is up
-+ * @isUp a boolean returning true if link is up
- *
- * This is called as part of iegbe_config_mac_to_phy() to align
- * the MAC with the PHY. It turns out on ICP_XXXX, this is not
- * done automagically.
- **/
--int32_t
-+int32_t
- iegbe_oem_phy_is_link_up(struct iegbe_hw *hw, int *isUp)
- {
- #ifdef EXTERNAL_MDIO
-@@ -2266,35 +2055,19 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- if(!hw || !isUp) {
- return -1;
- }
-- /*
-+ /*
- * Make note that the M88 phy is what'll be used on Truxton
- * see iegbe_config_mac_to_phy
- */
-
- switch (hw->phy_id) {
-- case BCM5395S_PHY_ID:
-- /* Link always up */
-- *isUp = TRUE;
-- return E1000_SUCCESS;
-- break;
--
-- case BCM5481_PHY_ID:
-- iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-- if(ret_val)
-- {
-- DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
-- return ret_val;
-- }
-- statusMask = BCM5481_ESTAT_LINK;
-- break;
--
-- case M88E1000_I_PHY_ID:
-+ case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-- iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+ iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-+ &phy_data);
- statusMask = M88E1000_PSSR_LINK;
-- break;
-+ break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return -E1000_ERR_PHY_TYPE;
-@@ -2319,213 +2092,3 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
-
--
--
--//-----
--// Read BCM5481 expansion register
--//
--int32_t
--bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
--{
-- int ret;
-- uint16_t selector;
-- uint16_t reg_data;
--
-- // Get the current value of bits 15:12
-- ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
-- if (ret)
-- return ret;
--
-- // Select the expansion register
-- selector &= 0xf000;
-- selector |= (0xf << 8) | (reg);
-- iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
--
-- // Read the expansion register
-- ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, ®_data);
--
-- // De-select the expansion registers.
-- selector &= 0xf000;
-- iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
--
-- if (ret)
-- return ret;
--
-- *data = reg_data;
-- return ret;
--}
--
--//-----
--// Read reg 0x18 sub-register
--//
--static int32_t
--bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
--{
-- int ret;
-- uint16_t tmp_data;
--
-- // Select reg 0x18, sv
-- tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
-- if(ret)
-- return ret;
--
-- // Read reg 0x18, sv
-- ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
-- if(ret)
-- return ret;
--
-- *data = tmp_data;
-- return ret;
--}
--
--//-----
--// Read reg 0x1C sub-register
--//
--int32_t
--bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
--{
-- int ret;
-- uint16_t tmp_data;
--
-- // Select reg 0x1c, sv
-- tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
--
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
-- if(ret)
-- return ret;
--
-- // Read reg 0x1c, sv
-- ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
-- if(ret)
-- return ret;
--
-- *data = tmp_data;
-- return ret;
--}
--
--//-----
--// Read-modify-write a 0x1C register.
--//
--// hw - hardware access info.
--// reg - 0x1C register to modify.
--// data - bits which should be set.
--// mask - the '1' bits in this argument will be cleared in the data
--// read from 'reg' then 'data' will be or'd in and the result
--// will be written to 'reg'.
--
--int32_t
--bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
--{
-- int32_t ret;
-- uint16_t reg_data;
--
-- ret = 0;
--
-- ret = bcm5481_read_1csv (hw, reg, ®_data);
-- if (ret)
-- {
-- DEBUGOUT("Unable to read BCM5481 1CH register\n");
-- printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
-- return ret;
-- }
--
-- reg_data &= ~mask;
-- reg_data |= (BCM5481_R1CH_WE | data);
--
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
-- if(ret)
-- {
-- DEBUGOUT("Unable to write BCM5481 1CH register\n");
-- printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
-- return ret;
-- }
--
-- return ret;
--}
--
--int32_t
--oi_phy_setup (struct iegbe_hw *hw)
--{
-- int ret;
-- uint16_t pmii_data;
-- uint16_t mctrl_data;
-- uint16_t cacr_data;
-- uint16_t sc1_data;
-- uint16_t lctl_data;
--
-- ret = 0;
--
-- // Set low power mode via reg 0x18, sv010, bit 6
-- // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
-- ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
-- if (ret)
-- {
-- DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
-- printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
-- return ret;
-- }
--
-- // Set the LPM bit in the data just read and write back to sv010
-- // The shadow register select bits [2:0] are set by reading the sv010
-- // register.
-- pmii_data |= BCM5481_R18H_SV010_LPM;
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
-- if(ret)
-- {
-- DEBUGOUT("Unable to write BCM5481_R18H register\n");
-- printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-- return ret;
-- }
--
--
-- // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
--
-- if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
-- {
-- DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
-- printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
-- return ret;
-- }
-- mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
--
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
-- if(ret)
-- {
-- DEBUGOUT("Unable to write BCM5481_R18H register\n");
-- printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-- return ret;
-- }
--
--
-- // Enable RGMII transmit clock delay in reg 0x1c, sv00011
-- ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
-- if (ret)
-- {
-- DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
-- printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
-- return ret;
-- }
--
-- cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
--
-- ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
-- if(ret)
-- {
-- DEBUGOUT("Unable to write BCM5481_R1CH register\n");
-- printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
-- return ret;
-- }
--
-- // Enable dual link speed indication (0x1c, sv 00010, bit 2)
-- ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
-- if (ret)
-- return ret;
--
-- // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
-- ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
-- if (ret)
-- return ret;
--
-- return ret;
--}
---- a/Embedded/src/GbE/iegbe_oem_phy.h
-+++ b/Embedded/src/GbE/iegbe_oem_phy.h
-@@ -2,31 +2,31 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
-- This program is free software; you can redistribute it and/or modify
-+ This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
-- This program is distributed in the hope that it will be useful, but
-- WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ This program is distributed in the hope that it will be useful, but
-+ WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-- The full GNU General Public License is included in this distribution
-+ The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
--
-- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-+
-+ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-
- *******************************************************************************/
- #ifndef _IEGBE_OEM_PHY_H_
-@@ -45,10 +45,10 @@ int32_t iegbe_oem_set_trans_gasket(struc
- uint32_t iegbe_oem_get_tipg(struct iegbe_hw *hw);
- int iegbe_oem_phy_is_copper(struct iegbe_hw *hw);
- uint32_t iegbe_oem_get_phy_dev_number(struct iegbe_hw *hw);
--int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
-+int iegbe_oem_mii_ioctl(struct iegbe_adapter *adapter, unsigned long flags,
- struct ifreq *ifr, int cmd);
- void iegbe_oem_fiber_live_in_suspend(struct iegbe_hw *hw);
--void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
-+void iegbe_oem_get_phy_regs(struct iegbe_adapter *adapter, uint32_t *data,
- uint32_t data_length);
- int iegbe_oem_phy_loopback(struct iegbe_adapter *adapter);
- void iegbe_oem_loopback_cleanup(struct iegbe_adapter *adapter);
-@@ -94,81 +94,14 @@ int32_t iegbe_oem_phy_is_link_up(struct
- #define ICP_XXXX_MAC_2 2
-
- #define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
--#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
--#define BCM5481_PHY_ID 0x0143BCA2
--#define BCM5395S_PHY_ID 0x0143BCF0
-+#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
-
- /* Miscellaneous defines */
- #ifdef IEGBE_10_100_ONLY
-- #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x0F
-+ #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x0F
- #else
- #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
- #endif
-
--//-----
--// BCM5481 specifics
--
--#define BCM5481_ECTRL (0x10)
--#define BCM5481_ESTAT (0x11)
--#define BCM5481_RXERR (0x12)
--#define BCM5481_EXPRW (0x15)
--#define BCM5481_EXPACC (0x17)
--#define BCM5481_ASTAT (0x19)
--#define BCM5481_R18H (0x18)
--#define BCM5481_R1CH (0x1c)
--
--//-----
--// indirect register access via register 18h
--
--#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits.
--#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control
--#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T
--#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control
--#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test
--#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control
--
--#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
--#define BCM5481_R18H_SV010_LPM (1 << 6)
--#define BCM5481_R18H_SV111_SKEW (1 << 8)
--#define BCM5481_R18H_WE (1 << 15) // Write enable
--
--// 0x1c registers
--#define BCM5481_R1CH_SV_SHIFT (10)
--#define BCM5481_R1CH_SV_MASK (0x1f)
--#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1
--#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control
--#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control
--#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1
--
--// 0x1c common
--#define BCM5481_R1CH_WE (1 << 15) // Write enable
--
--// 0x1c, sv 00010
--#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed
--
--// 0x1c, sv 00011
--#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay
--
--// 0x1c, sv 01001
--#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED
--#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
--
--
--#define BCM5481_ECTRL_DISMDIX (1 <<14)
--
--#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
--
--#define BCM5481_ESTAT_LINK (1 << 8)
--
--#define BCM5481_ASTAT_ANC (1 << 15)
--#define BCM5481_ASTAT_ANHCD (7 << 8)
--#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7)
--#define BCM5481_ASTAT_1KBTFD (0x7)
--#define BCM5481_ASTAT_1KBTHD (0x6)
--#define BCM5481_ASTAT_100BTXFD (0x5)
--#define BCM5481_ASTAT_100BTXHD (0x3)
--
--// end BCM5481 specifics
--
- #endif /* ifndef _IEGBE_OEM_PHY_H_ */
--
-+
---- a/Embedded/src/GbE/iegbe_osdep.h
-+++ b/Embedded/src/GbE/iegbe_osdep.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
---- a/Embedded/src/GbE/iegbe_param.c
-+++ b/Embedded/src/GbE/iegbe_param.c
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -239,11 +239,7 @@ E1000_PARAM(InterruptThrottleRate, "Inte
- #define MAX_TXABSDELAY 0xFFFF
- #define MIN_TXABSDELAY 0
-
--#ifdef IEGBE_GBE_WORKAROUND
--#define DEFAULT_ITR 0
--#else
- #define DEFAULT_ITR 8000
--#endif
-
-
- #define MAX_ITR 100000
-@@ -373,7 +369,7 @@ iegbe_check_options(struct iegbe_adapter
- tx_ring->count = opt.def;
- }
- #endif
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0; i < adapter->num_tx_queues; i++)
- tx_ring[i].count = tx_ring->count;
- }
- { /* Receive Descriptor Count */
-@@ -403,7 +399,7 @@ iegbe_check_options(struct iegbe_adapter
- rx_ring->count = opt.def;
- }
- #endif
-- for (i = 0; i < adapter->num_queues; i++)
-+ for (i = 0; i < adapter->num_rx_queues; i++)
- rx_ring[i].count = rx_ring->count;
- }
- { /* Checksum Offload Enable/Disable */
---- a/Embedded/src/GbE/kcompat.c
-+++ b/Embedded/src/GbE/kcompat.c
-@@ -1,8 +1,8 @@
--/************************************************************
--
-+/************************************************************
-+
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,183 +22,192 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
--
-- Contact Information:
--
-- Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
--
--**************************************************************/
--/**************************************************************************
-- * @ingroup KCOMPAT_GENERAL
-- *
-- * @file kcompat.c
-- *
-- * @description
-- *
-- *
-- **************************************************************************/
--#include "kcompat.h"
--
--/*************************************************************/
--/* 2.4.13 => 2.4.3 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
--
--/**************************************/
--/* PCI DMA MAPPING */
--
--#if defined(CONFIG_HIGHMEM)
--
--#ifndef PCI_DRAM_OFFSET
--#define PCI_DRAM_OFFSET 0
--#endif
--
--u64 _kc_pci_map_page(struct pci_dev *dev,
-- struct page *page,
-- unsigned long offset,
-- size_t size,
-- int direction)
--{
-- u64 ret_val;
-- ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset +
-- PCI_DRAM_OFFSET);
-- return ret_val;
--}
--
--#else /* CONFIG_HIGHMEM */
--
--u64 _kc_pci_map_page(struct pci_dev *dev,
-- struct page *page,
-- unsigned long offset,
-- size_t size,
-- int direction)
--{
-- return pci_map_single(dev, (void *)page_address(page) + offset,
-- size, direction);
--}
--
--#endif /* CONFIG_HIGHMEM */
--
--void _kc_pci_unmap_page(struct pci_dev *dev,
-- u64 dma_addr,
-- size_t size,
-- int direction)
--{
-- return pci_unmap_single(dev, dma_addr, size, direction);
--}
--
--#endif /* 2.4.13 => 2.4.3 */
--
--
--/*****************************************************************************/
--/* 2.4.3 => 2.4.0 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
--
--/**************************************/
--/* PCI DRIVER API */
--
--int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
--{
-- if(!pci_dma_supported(dev, mask)) {
-- return -EIO;
-- }
-- dev->dma_mask = mask;
-- return 0;
--}
--
--int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
--{
-- int i;
--
-- for (i = 0; i < 0x6; i++) {
-- if (pci_resource_len(dev, i) == 0) {
-- continue;
-- }
-- if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
-- if (!request_region(pci_resource_start(dev, i),
-- pci_resource_len(dev, i), res_name)) {
-- pci_release_regions(dev);
-- return -EBUSY;
-- }
-- } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-- if (!request_mem_region(pci_resource_start(dev, i),
-- pci_resource_len(dev, i),
-- res_name)) {
-- pci_release_regions(dev);
-- return -EBUSY;
-- }
-- }
-- }
-- return 0;
--}
--
--void _kc_pci_release_regions(struct pci_dev *dev)
--{
-- int i;
--
-- for (i = 0; i < 0x6; i++) {
-- if (pci_resource_len(dev, i) == 0) {
-- continue;
-- }
-- if (pci_resource_flags(dev, i) & IORESOURCE_IO){
-- release_region(pci_resource_start(dev, i),
-- pci_resource_len(dev, i));
-- } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-- release_mem_region(pci_resource_start(dev, i),
-- pci_resource_len(dev, i));
-- }
-- }
--}
--
--/**************************************/
--/* NETWORK DRIVER API */
--
--struct net_device * _kc_alloc_etherdev(int sizeof_priv)
--{
-- struct net_device *dev;
-- int alloc_size;
--
-- alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
--
-- dev = kmalloc(alloc_size, GFP_KERNEL);
--
-- if (!dev) { return NULL; }
--
-- memset(dev, 0, alloc_size);
--
-- if (sizeof_priv) {
-- dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
-- }
-- dev->name[0] = '\0';
--
-- ether_setup(dev);
--
-- return dev;
--}
--
--int _kc_is_valid_ether_addr(u8 *addr)
--{
-- const char zaddr[0x6] = {0,};
--
-- return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
--}
--
--#endif /* 2.4.3 => 2.4.0 */
--
--
--/*****************************************************************/
--/* 2.4.6 => 2.4.3 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
--
--int _kc_pci_set_power_state(struct pci_dev *dev, int state)
--{ return 0; }
--int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
--{ return 0; }
--int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
--{ return 0; }
--int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
--{ return 0; }
--
--#endif /* 2.4.6 => 2.4.3 */
--
--
-+ version: Embedded.Release.Patch.L.1.0.7-5
-+
-+ Contact Information:
-+
-+ Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226
-+
-+**************************************************************/
-+/**************************************************************************
-+ * @ingroup KCOMPAT_GENERAL
-+ *
-+ * @file kcompat.c
-+ *
-+ * @description
-+ *
-+ *
-+ **************************************************************************/
-+#include "kcompat.h"
-+
-+/*************************************************************/
-+/* 2.4.13 => 2.4.3 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0xd) )
-+
-+/**************************************/
-+/* PCI DMA MAPPING */
-+
-+#if defined(CONFIG_HIGHMEM)
-+
-+#ifndef PCI_DRAM_OFFSET
-+#define PCI_DRAM_OFFSET 0
-+#endif
-+
-+u64 _kc_pci_map_page(struct pci_dev *dev,
-+ struct page *page,
-+ unsigned long offset,
-+ size_t size,
-+ int direction)
-+{
-+ u64 ret_val;
-+ ret_val = (((u64)(page - mem_map) << PAGE_SHIFT) + offset +
-+ PCI_DRAM_OFFSET);
-+ return ret_val;
-+}
-+
-+#else /* CONFIG_HIGHMEM */
-+
-+u64 _kc_pci_map_page(struct pci_dev *dev,
-+ struct page *page,
-+ unsigned long offset,
-+ size_t size,
-+ int direction)
-+{
-+ return pci_map_single(dev, (void *)page_address(page) + offset,
-+ size, direction);
-+}
-+
-+#endif /* CONFIG_HIGHMEM */
-+
-+void _kc_pci_unmap_page(struct pci_dev *dev,
-+ u64 dma_addr,
-+ size_t size,
-+ int direction)
-+{
-+ return pci_unmap_single(dev, dma_addr, size, direction);
-+}
-+
-+#endif /* 2.4.13 => 2.4.3 */
-+
-+
-+/*****************************************************************************/
-+/* 2.4.3 => 2.4.0 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x3) )
-+
-+/**************************************/
-+/* PCI DRIVER API */
-+
-+int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
-+{
-+ if(!pci_dma_supported(dev, mask)) {
-+ return -EIO;
-+ }
-+ dev->dma_mask = mask;
-+ return 0;
-+}
-+
-+int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
-+{
-+ int i;
-+
-+ for (i = 0; i < 0x6; i++) {
-+ if (pci_resource_len(dev, i) == 0) {
-+ continue;
-+ }
-+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
-+ if (!request_region(pci_resource_start(dev, i),
-+ pci_resource_len(dev, i), res_name)) {
-+ pci_release_regions(dev);
-+ return -EBUSY;
-+ }
-+ } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-+ if (!request_mem_region(pci_resource_start(dev, i),
-+ pci_resource_len(dev, i),
-+ res_name)) {
-+ pci_release_regions(dev);
-+ return -EBUSY;
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+void _kc_pci_release_regions(struct pci_dev *dev)
-+{
-+ int i;
-+
-+ for (i = 0; i < 0x6; i++) {
-+ if (pci_resource_len(dev, i) == 0) {
-+ continue;
-+ }
-+ if (pci_resource_flags(dev, i) & IORESOURCE_IO){
-+ release_region(pci_resource_start(dev, i),
-+ pci_resource_len(dev, i));
-+ } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
-+ release_mem_region(pci_resource_start(dev, i),
-+ pci_resource_len(dev, i));
-+ }
-+ }
-+}
-+
-+/**************************************/
-+/* NETWORK DRIVER API */
-+
-+struct net_device * _kc_alloc_etherdev(int sizeof_priv)
-+{
-+ struct net_device *dev;
-+ int alloc_size;
-+
-+ alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 0x1f;
-+
-+ dev = kmalloc(alloc_size, GFP_KERNEL);
-+
-+ if (!dev) { return NULL; }
-+
-+ memset(dev, 0, alloc_size);
-+
-+ if (sizeof_priv) {
-+ dev->priv = (void *) (((unsigned long)(dev + 1) + 0x1f) & ~0x1f);
-+ }
-+ dev->name[0] = '\0';
-+
-+ ether_setup(dev);
-+
-+ return dev;
-+}
-+
-+int _kc_is_valid_ether_addr(u8 *addr)
-+{
-+ const char zaddr[0x6] = {0,};
-+
-+ return !(addr[0]&1) && memcmp( addr, zaddr, 0x6);
-+}
-+
-+#endif /* 2.4.3 => 2.4.0 */
-+
-+
-+/*****************************************************************/
-+/* 2.4.6 => 2.4.3 */
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(0x2,0x4,0x6) )
-+
-+int _kc_pci_set_power_state(struct pci_dev *dev, int state)
-+{ return 0; }
-+int _kc_pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{ return 0; }
-+int _kc_pci_restore_state(struct pci_dev *pdev, u32 *buffer)
-+{ return 0; }
-+int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
-+{ return 0; }
-+
-+#endif /* 2.4.6 => 2.4.3 */
-+
-+
-+
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
-+
-+void dump_stack(void)
-+{
-+}
-+
-+#endif /* 2.4.24 */
-+
---- a/Embedded/src/GbE/kcompat_ethtool.c
-+++ b/Embedded/src/GbE/kcompat_ethtool.c
-@@ -2,7 +2,7 @@
- /*
- * GPL LICENSE SUMMARY
- *
-- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@
- * Contact Information:
- * Intel Corporation
- *
-- * version: Embedded.L.1.0.34
-+ * version: Embedded.Release.Patch.L.1.0.7-5
- */
-
- /**************************************************************************
-@@ -779,6 +779,7 @@ static int ethtool_get_stats(struct net_
- }
-
- /* The main entry point in this file. Called from net/core/dev.c */
-+
- #define ETHTOOL_OPS_COMPAT
- int ethtool_ioctl(struct ifreq *ifr)
- {
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -2,7 +2,7 @@
-
- GPL LICENSE SUMMARY
-
-- Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+ Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
-@@ -22,7 +22,7 @@ GPL LICENSE SUMMARY
- Contact Information:
- Intel Corporation
-
-- version: Embedded.L.1.0.34
-+ version: Embedded.Release.Patch.L.1.0.7-5
-
- Contact Information:
-
-@@ -69,15 +69,6 @@ GPL LICENSE SUMMARY
- #define CONFIG_NET_POLL_CONTROLLER
- #endif
-
--#ifdef E1000_NAPI
--#undef CONFIG_E1000_NAPI
--#define CONFIG_E1000_NAPI
--#endif
--
--#ifdef E1000_NO_NAPI
--#undef CONFIG_E1000_NAPI
--#endif
--
- #ifndef module_param
- #define module_param(v,t,p) MODULE_PARM(v, "i");
- #endif
-@@ -554,35 +545,14 @@ extern void _kc_pci_unmap_page(struct pc
- #endif
-
- /*****************************************************************************/
--/* 2.4.23 => 2.4.22 */
--#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
--#ifdef CONFIG_E1000_NAPI
--#ifndef netif_poll_disable
--#define netif_poll_disable(x) _kc_netif_poll_disable(x)
--static inline void _kc_netif_poll_disable(struct net_device *netdev)
--{
-- while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) {
-- /* No hurry */
-- current->state = TASK_INTERRUPTIBLE;
-- schedule_timeout(1);
-- }
--}
--#endif
--#ifndef netif_poll_enable
--#define netif_poll_enable(x) _kc_netif_poll_enable(x)
--static inline void _kc_netif_poll_enable(struct net_device *netdev)
--{
-- clear_bit(__LINK_STATE_RX_SCHED, &netdev->state);
--}
--#endif
--#endif
--#endif
--
--/*****************************************************************************/
- /* 2.5.28 => 2.4.23 */
- #if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) )
-
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
-+static inline void _kc_synchronize_irq(void) { barrier(); }
-+#else
- static inline void _kc_synchronize_irq() { synchronize_irq(); }
-+#endif /* 2.4.23 */
- #undef synchronize_irq
- #define synchronize_irq(X) _kc_synchronize_irq()
-
-@@ -747,6 +717,37 @@ static inline struct mii_ioctl_data *_kc
- #define skb_header_cloned(x) 0
- #endif /* SKB_DATAREF_SHIFT not defined */
-
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
-+
-+#define ioread32(addr) readl(addr)
-+#define iowrite32(val,addr) writel(val,addr)
-+
-+#endif /* 2.6.10 */
-+
-+#ifndef DEFINE_SPINLOCK
-+#define DEFINE_SPINLOCK(s) spinlock_t s = SPIN_LOCK_UNLOCKED
-+#endif /* DEFINE_SPINLOCK */
-+
-+#ifndef PCI_COMMAND_INTX_DISABLE
-+#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
-+#endif /* PCI_COMMAND_INTX_DISABLE */
-+
-+#ifndef ETH_GSTRING_LEN
-+#define ETH_GSTRING_LEN 32
-+#endif /* ETH_GSTRING_LEN */
-+
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,24) )
-+
-+extern void dump_stack(void);
-+
-+#undef register_reboot_notifier
-+#define register_reboot_notifier(a)
-+
-+#undef unregister_reboot_notifier
-+#define unregister_reboot_notifier(a)
-+
-+#endif /* 2.4.24 */
-+
- #endif /* _KCOMPAT_H_ */
-
-
---- a/Embedded/src/GbE/Makefile
-+++ b/Embedded/src/GbE/Makefile
-@@ -1,6 +1,6 @@
- # GPL LICENSE SUMMARY
- #
--# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-+# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
- #
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of version 2 of the GNU General Public License as
-@@ -20,7 +20,7 @@
- # Contact Information:
- # Intel Corporation
- #
--# version: Embedded.L.1.0.34
-+# version: Embedded.Release.Patch.L.1.0.7-5
-
- ###########################################################################
- # Driver files
-@@ -35,6 +35,8 @@ MDIO_PHONY_CFILES = gcu.c
- MDIO_CFILES = gcu_main.c gcu_if.c
- MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h kcompat.h
-
-+KVER=$(shell uname -r)
-+
- #
- # Variables:
- # KSRC (path to kernel source to build against)
-@@ -50,45 +52,16 @@ MDIO_HFILES = gcu.h gcu_if.h gcu_reg.h k
-
- # set KSRC, KOBJ, and EXTERNAL_MDIO to default values of not already set
- #
--KOBJ ?= /usr/src/kernels/linux
--KSRC ?= /usr/src/kernels/linux
-+#KOBJ=/usr/src/kernels/linux
-+#KSRC=/usr/src/kernels/linux
-+#KSRC=$(KOBJ)
- EXTERNAL_MDIO ?= 1
- GBE_NAME = iegbe
- GCU_NAME = gcu
-
--# By default the workaround for the IEGBE writeback issue is enabled
--#
--IEGBE_GBE_WORKAROUND ?= 0
--
--# If the platform only supports 10/100 this variable needs to be set
--# so the default advertisement is set appropriately.
--# By default, this variable will be disabled.
--#
--IEGBE_10_100_ONLY ?= 0
--
--# check for version.h and autoconf.h for running kernel in /boot (SUSE)
--ifneq (,$(wildcard /boot/vmlinuz.version.h))
-- VERSION_FILE := /boot/vmlinuz.version.h
-- CONFIG_FILE := /boot/vmlinuz.autoconf.h
-- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | \
-- grep UTS_RELEASE | awk '{ print $$3 }' | sed 's/\"//g')
-- ifeq ($(KVER),$(shell uname -r))
-- # set up include path to override headers from kernel source
-- x:=$(shell rm -rf include)
-- x:=$(shell mkdir -p include/linux)
-- x:=$(shell cp /boot/vmlinuz.version.h include/linux/version.h)
-- x:=$(shell cp /boot/vmlinuz.autoconf.h include/linux/autoconf.h)
-- CFLAGS += -I./include
-- else
-- VERSION_FILE := $(KOBJ)/include/linux/version.h
-- UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-- CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
-- endif
--else
-- VERSION_FILE := $(KOBJ)/include/linux/version.h
-- UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-- CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
--endif
-+VERSION_FILE := $(KSRC)/include/linux/version.h
-+UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-+CONFIG_FILE := $(KSRC)/include/linux/autoconf.h
-
- ifeq (,$(wildcard $(VERSION_FILE)))
- $(error Linux kernel source not configured - missing version.h)
-@@ -98,83 +71,8 @@ ifeq (,$(wildcard $(CONFIG_FILE)))
- $(error Linux kernel source not configured - missing autoconf.h)
- endif
-
--# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--# so check that file for kernel version string instead of version.h
--USE_UTS_REL := $(shell [ -f $(UTS_REL_FILE) ] && echo "1")
--
--# pick a compiler
--ifneq (,$(findstring egcs-2.91.66, $(shell cat /proc/version)))
-- CC := kgcc gcc cc
--else
-- CC := gcc cc
--endif
--test_cc = $(shell $(cc) --version > /dev/null 2>&1 && echo $(cc))
--CC := $(foreach cc, $(CC), $(test_cc))
--CC := $(firstword $(CC))
--ifeq (,$(CC))
-- $(error Compiler not found)
--endif
--
--# we need to know what platform the driver is being built on
--# some additional features are only built on Intel platforms
--ARCH := $(shell uname -m | sed 's/i.86/i386/')
--ifeq ($(ARCH),alpha)
-- CFLAGS += -ffixed-8 -mno-fp-regs
--endif
--ifeq ($(ARCH),x86_64)
-- CFLAGS += -mcmodel=kernel -mno-red-zone
--endif
--ifeq ($(ARCH),ppc)
-- CFLAGS += -msoft-float
--endif
--ifeq ($(ARCH),ppc64)
-- CFLAGS += -m64 -msoft-float
-- LDFLAGS += -melf64ppc
--endif
--
--# standard flags for module builds
--CFLAGS += -DLINUX -D__KERNEL__ -DMODULE -O2 -pipe -Wall
--CFLAGS += -I$(KSRC)/include -I.
--CFLAGS += $(shell [ -f $(KSRC)/include/linux/modversions.h ] && \
-- echo "-DMODVERSIONS -DEXPORT_SYMTAB \
-- -include $(KSRC)/include/linux/modversions.h")
--
--ifeq ($(IEGBE_GBE_WORKAROUND), 1)
--CFLAGS += -DIEGBE_GBE_WORKAROUND -DE1000_NO_NAPI
--endif
--
--ifeq ($(IEGBE_10_100_ONLY), 1)
--CFLAGS += -DIEGBE_10_100_ONLY
--endif
--
--CFLAGS += $(CFLAGS_EXTRA)
--#ifeq (,$(shell echo $(CFLAGS_EXTRA) | grep NAPI))
--#CFLAGS += -DE1000_NO_NAPI
--#CFLAGS_EXTRA += -DE1000_NO_NAPI
--#endif
--
--RHC := $(KSRC)/include/linux/rhconfig.h
--ifneq (,$(wildcard $(RHC)))
-- # 7.3 typo in rhconfig.h
-- ifneq (,$(shell $(CC) $(CFLAGS) -E -dM $(RHC) | grep __module__bigmem))
-- CFLAGS += -D__module_bigmem
-- endif
--endif
--
--# get the kernel version - we use this to find the correct install path
--ifeq ($(USE_UTS_REL), 1)
-- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(UTS_REL_FILE) | grep UTS_RELEASE | \
-- awk '{ print $$3 }' | sed 's/\"//g')
--else
-- KVER := $(shell $(CC) $(CFLAGS) -E -dM $(VERSION_FILE) | grep UTS_RELEASE | \
-- awk '{ print $$3 }' | sed 's/\"//g')
--endif
--
--KKVER := $(shell echo $(KVER) | \
-- awk '{ if ($$0 ~ /2\.[6-9]\./) print "1"; else print "0"}')
--ifeq ($(KKVER), 0)
-- $(error *** Aborting the build. \
-- *** This driver is not supported on kernel versions older than 2.6.18)
-+ifeq (,$(wildcard $(UTS_REL_FILE)))
-+ $(error Linux kernel source not configured - missing utsrelease.h)
- endif
-
- # set the install path
-@@ -202,11 +100,11 @@ ifneq ($(SMP),$(shell uname -a | grep SM
- endif
-
- ifeq ($(SMP),1)
-- CFLAGS += -D__SMP__
-+ EXTRA_CFLAGS += -D__SMP__
- endif
-
- ifeq ($(EXTERNAL_MDIO), 1)
-- CFLAGS += -DEXTERNAL_MDIO
-+ EXTRA_CFLAGS += -DEXTERNAL_MDIO
- endif
-
- ###########################################################################
-@@ -223,7 +121,6 @@ MANSECTION = 7
- MANFILE = $(TARGET:.ko=.$(MANSECTION))
-
- ifneq ($(PATCHLEVEL),)
-- EXTRA_CFLAGS += $(CFLAGS_EXTRA)
- obj-m += $(TARGET:.ko=.o)
- iegbe-objs := $(CFILES:.c=.o)
- ifeq ($(EXTERNAL_MDIO),1)
---- a/filelist
-+++ b/filelist
-@@ -1,41 +1,3 @@
--Embedded/Makefile
--Embedded/environment.mk
--Embedded/src/1588/1588.c
--Embedded/src/1588/1588.h
--Embedded/src/1588/IxTimeSyncAcc_p.h
--Embedded/src/1588/Makefile
--Embedded/src/1588/ixtimesyncacc.c
--Embedded/src/1588/ixtimesyncacc.h
--Embedded/src/1588/linux_ioctls.h
--Embedded/src/CAN/Makefile
--Embedded/src/CAN/can_fifo.c
--Embedded/src/CAN/can_fifo.h
--Embedded/src/CAN/can_ioctl.h
--Embedded/src/CAN/can_main.c
--Embedded/src/CAN/can_main.h
--Embedded/src/CAN/can_port.h
--Embedded/src/CAN/icp_can.c
--Embedded/src/CAN/icp_can.h
--Embedded/src/CAN/icp_can_regs.h
--Embedded/src/CAN/icp_can_types.h
--Embedded/src/CAN/icp_can_user.h
--Embedded/src/EDMA/Makefile
--Embedded/src/EDMA/dma.h
--Embedded/src/EDMA/dma_api.h
--Embedded/src/EDMA/dma_client_api.c
--Embedded/src/EDMA/dma_common.c
--Embedded/src/EDMA/dma_internals.h
--Embedded/src/EDMA/dma_linux.c
--Embedded/src/EDMA/os/os.c
--Embedded/src/EDMA/os/os.h
--Embedded/src/EDMA/os/os_list.c
--Embedded/src/EDMA/os/os_list.h
--Embedded/src/EDMA/os/os_types.h
--Embedded/src/GPIO/Makefile
--Embedded/src/GPIO/common.h
--Embedded/src/GPIO/gpio.h
--Embedded/src/GPIO/gpio_ref.c
--Embedded/src/GPIO/linux_ioctls.h
- Embedded/src/GbE/Makefile
- Embedded/src/GbE/gcu.h
- Embedded/src/GbE/gcu_if.c
-@@ -55,16 +17,6 @@ Embedded/src/GbE/iegbe_param.c
- Embedded/src/GbE/kcompat.c
- Embedded/src/GbE/kcompat.h
- Embedded/src/GbE/kcompat_ethtool.c
--Embedded/src/WDT/Makefile
--Embedded/src/WDT/iwdt.c
--Embedded/src/WDT/iwdt.h
--Embedded/src/patches/Intel_EP80579_RHEL5.patch
--Embedded/src/patches/pci.ids_RHEL5.patch
- LICENSE.GPL
--build_system/build_files/Core/ia.mk
--build_system/build_files/OS/linux_2.6.mk
--build_system/build_files/OS/linux_2.6_kernel_space_rules.mk
--build_system/build_files/common.mk
--build_system/build_files/rules.mk
- filelist
- versionfile
---- a/versionfile
-+++ b/versionfile
-@@ -1,4 +1,4 @@
--PACKAGE_TYPE=Embedded
-+PACKAGE_TYPE=Embedded.Release.Patch
-
- PACKAGE_OS=L
-
-@@ -6,4 +6,6 @@ PACKAGE_VERSION_MAJOR_NUMBER=1
-
- PACKAGE_VERSION_MINOR_NUMBER=0
-
--PACKAGE_VERSION_PATCH_NUMBER=34
-+PACKAGE_VERSION_PATCH_NUMBER=7
-+
-+PACKAGE_VERSION_BUILD_NUMBER=5
projects / openwrt / staging / yousong.git / commitdiff